#Anbernic RG34XXSP
1 messages · Page 3 of 1
honest the 35xxSP is fantastic for GBA
How do you fuck this up? Especially when they got it perfect last time
It's like the New Coke of handhelds
GD now I want this so bad
Yeah. V90s it is. Lol. Assuming it comes out
I don't really think the v90s is gonna have a 3:2 display
3.5 640x480 is the most likely
Sticks?
63
96
2
No
OMG 💯💯💯
Anbernic should lurk on this discord more often before they release a new device instead of just guessing and wishing for the best xD
Does that mean we will start seeing reviews on youtube next week
Raaaaaaaaaaah super sp!!!!!!!!!
It's funny that the 35xxsp and the 34xx came from the same company that's releasing this lol, feels like they have two completely different design teams or something
The indigo looked neat until I saw the buttons lmao why are they colored they'd look so much better grey
No colors based on actual gba sp colors?? How does that even happen
Fuckery department came knocking
This thing is my disappointment of the year
now russ gotta make a new video smh
at very least I would expect reviewers to have one on their hands by late next week
if not sooner
my take is that brother Zhou made those but then got busy with new handhelds and handed over making the 34xxsp to a new intern assuming it should be an easy project for a new recruit
but then these companies have a long history of making bangers without really understanding what made them bangers so
They are probably on a different kind of drugs this time
maybe they got their fentanyl supply cut off by cheeto
Fuckery department
They'd have to get better at catching US citizens at boarder (90% of fentanyl trafficking). So unlikely 😆
This device looks awful. It looks like they kept the same lid and made the bezel larger to fit the smaller screen. Either that or they pulled a Retroid pocket mini and just put the bezel over the original XX SP screen.
there's always a chance
They should've used the ayaneo pocket micro screen tbh
1st one for sure.....they can't be that crazy right!?!?!?!
so is this going to have a slightly more powerful chip than miyoo flip's?
Slightly Less powerful
Rk 3566 is more powerful than h700, but not by a hell of alot
I may have been ok with the bezel but gd the colors and plastic look awful
it's confirmed that it's going to use the h700? I heard it was going to use something different
It is yea, supposedly their last new device using it
Yea, last h700 device
The last, not sure you can trust Anbernic on that 
34XX was supposed to be the last
The last until the next one 
wow, I guess I'll just stick with my miyoo flip. Was hoping for something a bit more powerful to improve on dreamcast/n64/psp
Yeah I hope their new chip can play these systems well
Otherwise they might as well stick with h700 for more CFW support
Currently speaking:
Retroid Flip 1 or 2 for the Clamshell 
I have a GPD Win Mini so the retroid flip would be a bit redundant for me...need something more pocketable as my retro handheld
My flip 2 should arrive this week. I think I am going to play GBA games on there. I was hyped for 34XX sp to be very faithful to GBA SP and use it as a GBA only device.
Now it has sticks and ugly design. I don’t think I’ll get one
Got the order backwards - 35xxsp can be less authentic with sticks and a 4:3 screen, while 34xxsp should be more authentic without sticks and with a 3:2 screen
Absolutely.
would indeed make more sense, especially as the 35xxSP screen is pretty much better for anything but GBA
Its fine for gba imo, def worst system is psp lol
Hav we heard if review units have been sent out?
Yeah
Just curious, where did you see that confirmation?
Idk I feel like the ugliness of this device isn’t a dealbreaker. It’s not the best, but it’s not that horrible either. I would rather have sticks than not have them and better portability / less bulk is sweet. Probably just gonna wait for either muos or knulli first though, then this will probably replace my 35xxsp
On here, from the same guy they always talk to on AliBaba
It was almost a month to 6 weeks ago now
They were originally going to use a p65, but I guess felt they had enough h700 chip lying around to pump out 1 more device
P65 would be nice
Agreed
Maybe the next version 
Tired of all these h700 devices....however, Good news for CFW devs. Easier to get the support on it early
Downside for consumers, more h700 devices when there are too many already
For this device H700 is ok IMO. The top bezel wouldn't be that bad on the black model.
I think on these Plastics, even the Black Model is too Noticable lol
Yeah, there's something off with the plastic here.
Now that the disappointment of not getting a SP copy equivalent to what the RG34XX was to the OG GBA, I really think I would have gotten a black one if it wasn't for the sticks.
I'm not saying it makes sense, but the sticks are a deal breaker for me 😦
I just want to pretend I'm a kid playing my GBA SP again!
The 35xxsp is as good as it gets
I wish I wasn't so sensitive to ppi and integer scaling...
Years of working on retina displays have turned me into a screen snob
I absolutely love the screen of the RG34XX for gba though, perfect size without being too big
guess i'll be sticking with my r36s for longer
Hmm touch one 35
it's not just the ppi, the screen on the rg35xxsp is frankly super mediocre
the screen on the rg34xx is miles and bounds better (for GBA anyway)
yeah unless this is thinner than the 35xxSP it kinda just feels worse in almost every way
onky better on one way
which is gba
if they removed the sticks, made the bezels small it coukd actually compete with the rg35xxsp
not like this
only gba enthusiasts will buy it
even then it's kinda ugly no?
I feel like gba enthusiasts are gonna buy the 34xx
since that one is designed well and has the same screen
this looks almost definitely like the exact same size, just with sticks and a smaller screen
in fact, hold on, heres a funny pic
also them streaming black myth wukong to this is hilarious
Black myth wukong sold like 30 million copies in China alone so being able to stream it there is a huge seller 
The question is, what is anbernic up to?
Shouldn't they have been able to foresee the community bashing this design?
Usually they only intentionally leave one or two flaws
but this time they're releasing something that completely defeats the purpose
no reason to think people would bash it when they also bought 2 revisions of the miyoo flop
Miyoo Flop 🤣
despite evidence in front of people, tons continue to buy it, even now 
It's probably because it (the miyoo flop) is an aesthetically pleasing device
but the colors and bezel on the 34XXSP seems to piss off a lot of people
i think some sliders would have looked nicer personally
It's like the shell was made for the 3.5 screen and then they changed their mind so had to modify the shell a little bit 
They just needed to replace that front plastic nothing else 
does anyone know if the buttons will still be clicky?
Probably so
The whole thing about the GBA SP is that its buttons use dome switches
The 35xxSP and Miyoo Flip do the same
I should hope that the buttons on this are slightly less clicky than the 35xxSP's though
I am pretty sure a lot of people will still buy this device.
I'm definitely thinking of buying it
But I've been kinda disappointed by my XX devices
Mainly that I find the audio to have more static in them than on other devices I own
Annoyingly, if it were just the sticks I’d be happy to remove, fill and refinish the shell in a cool colour. But it seems the screen is shifted down off centre to accomodate for the thumb stick peak. So we’re left with unnecessary bulk and screen placement
The V90S not having a headphone jack is criminal
Optimistic someone will nail the compact clamshell format soon
RG 34XXSP Specifications:
Color Options: Yellow, Gray, Black, Indigo
Display: 3.4-inch IPS full-view, OCA full lamination 720*480 (GBA triple pixel-to-pixel display)
CPU: H700 Quad-core ARM Cortex-A53, 1.5GHz
GPU: Dual-core G31 MP2
RAM: LPDDR4 2GB
Operating System: 64-bit Linux
Battery: Polymer lithium battery 3300mAH, 6 hours of battery life
Ex...
Hmm still no dimensions but h700 confirmed
Nothing surprising about the specs right? Looks identical to other H700 devices
Idk if they used a metal piece prior to this
what the hell where they thinking, why couldnt they just add black glass bezel around the screen 😦 would it look much better?:
Wdym glass bezel?
Oh
Yeah I would have preferred that
There was a time where Anbernic devices would feature the logo below the screen
But those days are gone
Even when a device would benefit from it
yeah, I just placed the logobut it could just be empty black space and it still would look much better :
😛
right now I feel the screen is too low
I know there's been overwhelming negativity surrounding it, but I honestly don't mind the 5head lol
Gives the device character
I don’t have 35XX SP, but I have GBA SP and 34XX. 34XX SP uses the same screen as 34XX. Does it look 34XX SP will be smaller than 35XX SP?
I mentioned before that given the small sticks on this, maybe they somehow reused the ones from the 557, as unlikely as it would be
But if they had, they would have mentioned it by now
So I think they're probably just Switch sticks with small caps
Same as the Miyoo Flip
100%
maybe we can replace them with gulikits if we 3d print smaller caps
A 3:2 3.4" screen is only 0.8mm wider than a 4:3 3.5" screen
But the bezels on the sides are clearly much smaller on this
They're comparable to those on the Miyoo Flip
If the buttons are good this time I will buy it anyway, even though I hate how it looks xD
let's hope they will also clone Miyoo's dome switches
The bezels on the sides look a lot thicker than Miyoo flip to me
(as a matter of fact it doesnt matter if they clone dome switches from Miyoo, Trimui or Retroid all of them are 100x times better than Rg35xxSP)
they do in Brick and TSP
Huh
I really thought I'd like the Trimui D-pad but I just don't, unfortunately
Not enough pivot for my tastes
maybe you just prefer conductive rubber d-pads
Are those just standard rubber membrane?
Idk that bezel on top really bothers me each time I look at it
yup, I like both types, just didn't like RG35xxSP there was something off with it. Not only loudness but also I dont know, the travel felt weird as well, I thing it was too long for a clicky dpad if it makes sense.
yeah, agree, it really looks bad
So the big thing with the 35xxSP's buttons is that outside of them being loud, they take quite a bit more force to press than other buttons
Really hoping to see a slightly better chipset than the H700. Just for slightly better N64 or PSP, to really take advantage of the screen and form factor. Especially since it no longer looks like its designed just for GBA
But PS Vita D-pad is my beloved
Probably not likely, but hopeful until they announce the chip themselves lol
That's part of why I'm so hyped for the upcoming Helegaly devices
Specs just came out
It's the XX standard
Only point of interest for me is that a 3300mAh battery is pretty good if it's the size I think it's gonna be
Mine too, I actually really like Retroid's dpads as well
and classic Nintendo dome switches were also wonderful in DSi and 3DSes
and GBA SP ofc 😉
With Trimui, maybe it's not the pivot I have issue with, but how shallow the press is
Like the D-pad barely moves when you press it
It is indeed, but at the same time I think it would work great in clamshell form factor 😉
Oh, I see the screenshot above. Does that say 2gb ram vs the typical 1gb???
This says 2gb ram instead of 1gb, typo or improvement?
Oh I didn't even notice the 2 GB RAM
I have no idea what that would be for
But they did show the device game streaming
For...reasons
Maybe it's for that?
This is the measurement based on my 34xx screen size which is 48mmx72mm
Is this smaller than 35xx SP?
Possibly a typo. Hopefully it at least gives a slight boost
The device size is about 81mmx77mm
That's encouraging
that would be pretty cool for portmaster
So quite a bit smaller
It'd be about 0.5mm wider than the Miyoo Flip in this case
So definitely much closer in size to the GBA SP
More complete measurement. So it's smaller than 35xxsp but still bigger than GBA SP? Miyoo Flip is almost identical to GBA SP right?
Actually I think I got my measurements mixed up
35xxSP is 89 mm tall, 85 mm wide
According to Wikipedia, GBA SP is 82mmx84mm
I'd say your measurements of the top half are solid, but perspective is probably messing them up for the bottom half
Chances are, the device (closed) is gonna be a bit taller than it is wide
I confirmed with my own measurement of GBA SP: 82mmx83mm
Yeah the bottom measurment is probably wrong
That's why I also measure the hinge and top screen height
72+11mm is 83mm
So it does look like it will be very close to original GBA SP
That's a huge plus to me. If they remove the sticks, move the screen higher, and put black bezels like this will be the perfect device haha
This
Based on the previous measurement of the lid height as 71.5mm, the whole device height is about 84mm, bottom thickness 16.5mm, lid thickness 7.5mm, total thickness 24mm
Still can't get over this design LOL
It looks like a cartoon dragon head to me
The extra ram might give this better compatibility with some portmaster games over the other xx devices, maybe?
This does fit my specific use case
Source?
Care to link to this?
Ok, I found it, it's the latest promo vid
Yes that’s right. Just a screenshot from the latest promo video.
#1348860122402787389 message
wild to me that just the existence of sticks turns people off. If you're not using them on the Miyoo Flip you literally don't even notice them
I thought H700 was confirmed
Idk, pretty Great with a Grip 😉
How are you doing Minecraft?
PortMaster, ClassiCube
I love that Party trick 
Looks like H700 is confirmed but may have 2gb ram instead of the typical 1gb
How would that make a difference?
No idea, thats what makes it a curious change
Anbernic already makes a GBA SP clone. It’d be stupid for them to just make a more accurate clone.
the spec sheet says 2gb... why tho?
portmaster apparently
honestly the miyoo flip is starting to look better
if they made a revision that didn't break when you look funny at it, I'd rather buy that than this
I have had my v2 Yellow for 1 month. Daily use, multiple flips per day. No issues with the Hinge
Miyoo strong 
I still like this
2gb of ram is nice but h700 
I feel like going from the 34xx to the 34xxSP is a huge step down
Because the 34xx was so accurate to the GBA but the 34xxSP isn't to the SP?
that sucks if this is true, why wouldn't they match miyoo flip small size FUCK
It does seem like they're just giving the middle finger to the Miyoo Flip lol
yeah, the 34xx was the exact dimensions etc
then this looks like they re-used 35xxSP shells and had to put a 5head on it because their ribbon cables were too short
at least match miyoo flip lol. FUCK
you had 1 job anbernic
no lol, miyoo flip is much smaller than 35xxsp
it's good that they made it a lil bigger
almost the same size as gbasp
otherwise the sticks wouldn't be screwed down like in the Miyoo Flip 
Dude, can you not read or something?
RG35xxSP is 27mm thick
miyoo flip size is almost the same as gbasp
miyoo flip?
22.3
rg34xxsp?
24
is 24 smaller or bigger than 22.3?
honestly, I will stick with the rg35xxSP
i sold mine after feeling how big it was
its fucking huge as a handheld
it's more comfortable than the original SP for me
seems like you dont have a gbasp on hand. after comparing it, rg35xxsp sucks
too big
I have two, and still nah, rg35xxSPs extra thickness makes it more comfortable 
hey its not me who said 15, you did
i get comfort, but putting it in your pockets, its another story
too big
at that point why even get a flip if its not for pocketability
screen is protected, so it's still kinda more pocketable than other stuff
i meant the size, try putting it in your jean shorts
trust me, you cant
or at least not comfortable
Jean shorts 
Jhorts are back in
i don't wear skinny jeans so technically everything goes into my pockets 
oops i meant jeans/shorts my bad
doubt you put rg35xxsp in your pockets
what's wrong with you? don't accuse peeps of that
hey its not me who said he like 15 year olds
he didn't???
then why he ask for them?
recently it has been my Retroid Flip 2 which is 24.4 
let me know what pants you use lmao
with a walllet+ phone + home/car keys, you can't fit 35xxsp
miyoo flip is doable
hopefully we see real life photo comparison of 34xxsp
yeah obviously you can't stuff all that into your pockets alongside it 
its doable with miyoo flip which is gbasp sized
35xxsp is impossible
Wear a bag
im not a girl nor want to be one
Wut
Phone and handheld in right pocket, wallet and keys in left
Idk what the fuck is up with this guy
That's the way I do it at least
There's definitely a language barrier to some degree
yea thats correct, you cant do it with 35xxsp, i tried
i can with gbasp which is miyoo flip sized
I usually wear cargo pants, and I put my handheld in my back pocket, which has nothing else in it
oh hell nah, wallet goes into the back, keys in the right, phone/handheld left
35xxSP is possible but it's not super comfortable since I can feel it on my ass at all times
I dont use my backpockets
only girls wear bag outside, unless you wanna be one which is ok by me
Work bag, backpack, crossbody
Wait left pocket? Are you left handed
nah
Sorry Smmuny, I'm gonna have to transition you
Please do not resist
but I can use my phone with my left hand just fine, keys not so much 
Nah I gotta keep my phone in my right pocket for quick access doomscrolling
exactly, if 34xxsp has the same size as gbasp like miyoo, I'll buy it day 1
i meant leisurely, men don't wear it in family outings or dates
Those are things I could not bring my handheld to
you can if its not 35xxsp
the size is too big
No thanks
thats my whole point
Bro
I dont need to see that
did he put a fleshlight inside that bag?
dude 
dude, you're the sick one who posted it
I don't fucking know
okay, easy fix for steamdecks issue
First it was me getting accused of liking children
he needs to find a girlfriend, which he then brings along and has her carry the 35xxSP in her handbag
problem solved
Rule #1 @slender bone
Treat everyone with respect. Absolutely no harassment, witch hunting, sexism, racism, or malicious trolling will be tolerated. It goes without saying that there should be no political discussion, this is a handheld gaming server.
Wish this had an rk3566 so we could get gammaos core
Does GammaOS really make such a difference on 3566 devices?
Gamma is the battery wizard 
I just figured I'd avoid Android like the plague on a device that mostly plays lower end systems
at the end of the day Android is just Linux anyway
I just think it's cool to play android games on a cheap device
Yeah I mean it's really only lighter titles tbf, even dead cells didn't run the greatest on my smart pro
I mean it's fun to mess around with, given how you can just run Youtube or something on it 
also as already said, Gamma is a battery wizard, especially his standby times are insanity
half the reason the e6plus did so well.
it runs like 75% of the playstore and all of the games that were removed and archived on shadey community sites. panda gamepad pro go brrrr...
It's ugly. That's sort of the only thing that's wrong here.
I do have a slight issue with the idea of bringing a sling because the 35xxSP is too bulky in my pants pocket
which is that once I grab the sling I may as well bring the ally X, RP5, 406v, etc
so my 28xx is the real godsend for when I don't want to bring a sling
Poor 28xx, so criminally underrated.
I never thanked you for pushing me to buy it btw 
the dpad on the 28xx is actually so good for shmups
insane amount of pivot if you just plant your thumb in the middle and treat it like an arcade stick
it's my parodius da machine when I'm stuck in a waiting room somewhere
Yea my favorite 2 so far are the 35xxsp and the 40xxv....
I found the 35xxSP just a bit too big in my pocket and the 40xxV I haven't tried because I'm all in on the 406v lol
I am curious what that next 4"+ device will end up being
I'm very curious to see what their new 4.7" 4:3 screen device looks like
yeah man, it just falls out. strongest hinge is one that falls out before breaking
it and the max kind of have that love-it-hate-it vibe going, looks-wise
I'm wondering if by shrinking bezels it would be possible to fit the 4.7" into a 406v shell lol
like are we gonna get a 477v fat gameboy supreme?
one of my coworkers has a 35xxsp, and yes, it is not pocketfriendly
the 35xxSP is a great handheld to just leave on your desk closed when you aren't using it
the x18s was actually that perfect wallet size, so it could live in your pocket all day.
Yea I have one and while it fits in the pocket it isn't comfortable
and then grab it whenever
For me it lives in my work bag
i mean if it's smaller than the 35xxSP it is still kinda tempting
but like, joysticks and weird bezels, whyyyyyyy
Doubt this 34xxsp is going to be smaller
v90 was great for cargo pants/shorts pockets
V90S looking mighty tempting though
same goes for the r36s
I just hope it isn't much bigger than the OG v90
and hoping it has the 3.2" 1024x768 screen
my only v90 issue was the shitty dpad tbh
if only powkiddy chose a stiffer rubber, it would be perfect
This
If it does
It would be pretty amazing
powkiddy dpads have come a long way from the OG v90
but then like, you have the q90, which was simply great
so I'm hopeful for the v90s dpad
But something tells me the screen will be a 3.5" typical
But man would I love to be wrong on that lol
hrmmm..
powkiddy refresh the q90, but with the Unihertz Jelly processor/screen. 😄
This time around, I attempt to fight Stormterror (lv90).
It was a lot tougher than it looks. I actually failed twice trying to record this before getting it on the 3rd try.
The small screen really makes it hard to make certain taps and movements in the game.
#gacha #gachagames #genshin #genshinimpact
isn't the unihertz jelly a g99?
oh the jelly 2 not the jelly star
same screen but the jelly 2 is a p60
yeah, the magical 3:2 jelly 2.
SD-wide, wow
yeah its basically a 3" version of the OGU/rgb10max3pro screen
that could do some good 1x widescreen dreamcast and gc. RIP Miyoo P60
also 3x integer 2.6" gba lol
but yeah that's the same size as the pixel 2 for 4:3 or narrower content
hrm
its a smaller screen than the 28xx for most stuff
I could see it now. The Powkiddy JellySP. ughhh...
ngl it looks pretty decent if I squint my eyes hard enough 
I'd buy a widdle clamshell with the jelly screen
I'd want a chip with linux support tho
like I'd rather have 3556 than p60 or g99
or h700
something that runs cold so it doesn't explode
yeah
h700 would be perfect
though it would be nice to get something that can run psp better I don't think that's realistic
the problem with better cheap psp emulation currently is liking android or liking hot-hands. I guess the ogu/rgb10max3pro both also count as hot-hands devices despite the tactical heatsink over their amlogic chips
Yeah I just want a psp clone as faithful as the 34xx is to the gba
But it seems we can’t make a device that can emulate psp as small as an actual psp yet
View all specifications and features of the MagicX Mini One 41, the Android-based gaming handheld that can play up to PlayStation 2 games. The Mini One 41 features a 4.1” IPS screen with an aspect ratio of 16:9, 3 GB of RAM, and a 4000 mAh battery...
Ironically I have 5 PSPs and a vita... And recently got a vita TV to use as my dev console lol
Because the vita tv with sharpscale does 4x int pixel perfect
....and I also don't have to worry about spicy pillows
Does anyone know the aspect ratio of the Miyoo Flip? Is it the same as this 34xx sp?
Miyoo flip is 4:3
Yeah ironically the 34xxSP will be the first clamshell with the same aspect ratio as the actual GBA lol
I've gotten to the point where although I'd love 3:2 for that perfect GBA scaling
The versatility of 4:3 is too good lol
If this uses the same screen as the 34xx, it could have black screen insertion?
Honestly I have so many devices I can make GBA look good enough on, I'd probably only buy one of these because it had perfect ratio
so... a p65 handheld
does this exist yet?
It's going to
The best of both worlds is a 4:3 that has high enough ppi for decent non-integer scaling
Or 960x640 res
Wanted to reply to this
So basically a clamshell sp clone that uses the bricks screen
Yes, I would prefer a bit bigger screen like 3.5 inches though
Truth be told I don't think I could go back to 3.5 after getting a 4" device
3.2/3.5 would literally be my pocket category
....which would end up being everything low res based like gb/gbc
Not quite. 2GB of ram here. Everything else only had 1GB
So I'm assuming more ports will work on it
Which is a little odd that it would be the only h700 with double the ram
I’m asking myself why they made that decision. Unless maybe they were thinking about something other than the h700 soc at some point
Probably cheap
I'm assuming they ran out of 1GB chips and got a good deal on rolls of 2GB ram chips
Probably using up all their remaining h700 chips and will release a v2 with a more powerful chip forcing customers of the v1 to double dip
I'd gladly double dip on a V2 RG28XX, ngl.
If it has a non rotated screen, is brighter, and has WiFi, same otherwise, I'm so there with you
My fav small device
if the Zero28 didn't exist, the RG28XX would be my go to pocket handheld
I fondle both of them daily with love.
Looks super similar to the miyoo flip now lol. I still think it's smaller than the 35xx sp
RG 34XXSP Specifications:
Color Options: Yellow, Gray, Black, Indigo
Display: 3.4-inch IPS full-view, OCA full lamination 720*480 (GBA triple pixel-to-pixel display)
CPU: H700 Quad-core ARM Cortex-A53, 1.5GHz
GPU: Dual-core G31 MP2
RAM: LPDDR4 2GB
Operating System: 64-bit Linux
Battery: Polymer lithium battery 3300mAH, 6 hours of battery life
Ex...
Well at least to all who wanted to do the Pikachu SP... They now have their perfect model
Either that or a cropped better quality of this on the lid
Perfect
Actually looks decent here, wonder if retail units will match this vs the engineering sample we saw in the first video
Get ready to unfold the next big thing in retro gaming — introducing the ANBERNIC RG 34XXSP, where classic handheld nostalgia meets cutting-edge functionality.
Buy here avaliable soon https://anbernic.com/blogs/news/rg34xxsp-debuts
Technical specifications
Color Yellow, Gray, Black, Indigo
Screen 3.4-inch IPS full viewing angle, OCA full lam...
I am almost positive that Anbernic made this device just to fuck with Miyoo
Turns out my estimation yesterday was accurate. 34XX SP has similar size as Miyoo Flip / GBA SP
Guys, the powkiddy just sent out review units of their V90S
Having seen this I'm again torn between the v90s and the 34XXSP
You prefer clicky controls?
I am warming up to this device but still would prefer a more faithful clone
I originally pivoted towards the V90s, because I thought the [anbernic] buttons would be clicky
But then RGhandhelds said the buttons are not clicky, so I'm once again torn evenly between the two devices
v90s then
though it's not that faithful
I prefer 35XX SP. Almost faithful other than the size
Well the SP had clicky buttons, right?
It used dome switches
It's just that the 35xxSP went overboard with the clickiness
Yeah I think so
I'm hoping the 34xxSP has a lighter press to its D-pad
They made the face buttons of the 35xxSP lighter to press with later versions
But not the D-pad
Huh, looks fine actually. Now I'm excited to get it up and running 🙂
Hope to see more reviews next week
I like this a lot tbh
The 5Head is stupid and funny to me 
They could made it smallest 3.4 inch SP with normal layout without sticks & even remove XY buttons
But that's not what they did
So I'll settle for a miyoo flip clone with a working hinge
lol
I really waited for it after hearing from Joey for i guess 2 months
Now really wish if they gonna add stick as well make it with 40XX SP
use 960x720 screen, A527, 2GB RAM & 32GB internal FLASH
So a completely different device
Ya, Currently doesn't look SP either, so completly off the grid

Trimui brick screen?
ehhh ???
Apd screen instead
Just noticed they stole the microvents from Miyoo.
Or at least the shape, hard to tell if there's actually a cut there. Doesn't seem like it, actually.
Too bad V90S use A133P chipset 😭
dunno if i would call that a con yet...
I guess people are well used to it having thermal issues
Also apparently it's not good for ports
true
no 32bit means things like AM2R wont work
among other things
but i do like the look of it more than this thing lol
Isn't that the one that gets uncomfortably hot?
And it'll be in front at the bottom, too.
guess we wait and see
Certainly H700 has wider firmware support
yea
that said i could see nextui/pakui on the v90s which wouldnt be bad
and i know muos has been working on support for the brick/tsp which are also a133p
I would have genuinely accepted a return to the "ANBERNIC" text on the bezel of it meant no ugly forehead on this. It's so so hard not to see and think it's ugly as sin
Covering the bezels at all compared to the 35xxSP is such a bizarre choice
A kneejerk reaction to the Flip, most definitely.
The more I look at it the more I think it’s a deliberate “fuck you” to Miyoo
I heard Anbernic CEO Lao Zhou had a lot of beef with Miyoo CEO since ages ago
It's definitely a middle finger to the miyoo flop
Then he's probably australian saying "Fuck Me"
if it means people stop buying the miyoo flip that's a good thing for the hobby
miyoo has done nothing of value since the MM+
Yeah it's not like we have an unlimited amount of clamshell options. I'll take what I can get lol
nah man, this isn't the first time that they copy and outsell a competitor
a good chunk of Anbernic's business is just that
Is there anyone Anbernic staff doesn't hate?
Fuckery department
Miyoo flip has gammaos core though
Fair but I’m also a muOS boy
Love gamma lite on the t618 and can’t wait to use it on my 406v tho
It seems Lao Zhou has beef with everyone. I remember the RG Cube coming out with the same exact color config as the ZPG A1, just to spite them. He's always trying to 1-up other companies.
allegedly
Man. Imagine if he did that and his versions didn’t always look dumber than the targets they were trying to snipe.
I think other than the screen mount disaster, the Cube turned out okay. I don't know if it was the XX that added membrane shoulder buttons, but that in particular is fucking great.
They did nice soft membrane shoulders on the 34xx as well, golden
I hope the controls feel good on this one
The CubeXX D-pad really surprised me. I have an Arc and that D-pad is great, figured it was the same or maybe just like scaled down. Nah, the XX one feels horrible.
I don't expect different dome switches or buttons here.
Per the video the guy said they're not clicky
People mean different things by that
Interesting. I kinda like it even though it's not floating.
Ima assume he means they're not the same as the 35xx sp
Since that's what the video is comparing
Yeah. Makes sense.
Tbf if it’s something more in line with the ones on the Miyoo Flip, clicky isn’t the first word I’d reach for if we didn’t already use it to describe the tactile pop of dome switches.
There aren't many microswitch controls for retro handhelds
It's all relative
I don't even know if there are lol
The ZPG unicorn used Microswitches for abxy
ZPG did microswitches I think.
Loads of retro handhelds use them for shoulders, start, select, menu, etc
Microswitches? I can't think of any
Virtually all of them for those buttons.
The 28xx uses them for shoulder buttons
It's really only the verticals that escape start and select microswitch hell.
Nope, microswitches.
The 28xx shoulder buttons are straight up a mouse click microswitch
The overwhelming majority of the h700 line uses microswitch for shoulders, only CubeXX and 40xxH I think are membrane. And the 34xx.
You said start select lol
For start and select, I know 35xx+ doesn't have it, I assume 40xxV has membrane buttons too. 34xx?
There are some mouse switches in the x86 world too. Zotac Zone, probably others I didn’t pay attention to.
X86 of course. And even telescopic controllers
But for abxy or anything that is a front facing button, so far zpg abxy
So when someone says clicky on retro handhelds I am certainly not thinking micro switches lol
Same
Semantics anyways. I like this handheld and am a freak
Any word on if they're going to have US warehouse stock for these? I don't think Anbernic is going to get much US sales on these if not.
This niche seems to be finding ways to smuggle products through lower tariff countries pretty effectively. Price is probably still gonna seem a little high as a consequence, but it shouldn’t be fully prohibitive if you like this guy enough.
Also wouldn’t be surprised if everyone else has them for a while before we can get them, since laundering that stock through other countries will probably take a bit.
If we gotta wait a little longer to get handhelds at decent prices then I'm down for that.
With the reveal that the v90s has the a133p chipset and this has membrane controls (right?), I feel justified in choosing the Miyoo Flip
RGHandhelds deleted his video but didn't he say that the buttons are harder to press compared to Miyoo Flip? (And he presented it as if it was a good thing lol :P)
Wow. They really did just copy/paste the Miyoo.
Didn’t watch it so idk! But if he did that’s crazy, the flip buttons are perfect
would be awesome if we can purchase the shell and just put the guts of the miyoo flip into the 34xxsp
People are also complaining about the ugly forehead and sticks on Baidu forum
I think we will get a stick less 3:2 SP within a year
ok over under what are the chances they found whatever manu was doing the flip shell and had them crank some custom ones out
and it has the same problems as the flip 🤣
The hing is very different
34XX SP’s hinge is similar to 35XX SP and GBA SP
It’s asymmetric
While Miyoo Flip is symmetrical
There is probably some overlap in where they get their molds from
Not sure why causes Miyoo Flip to fail but that’s a noticeable difference at least
going to guess poor choice in whatever plastics the grey one is made of
I doubt Anbernic reused Miyoo’s mold
its mostly just that one color having issues
But they could come from the same factory
its size and port layout more closely resembles the flip but with a reset button and the 35xx hinge assembly
its mostly just the 5head that makes me think they could be using a similar mold
The ports are actually diff from the flip
and diff from the 35xx
Idk about the side sd slot but the usb c is on top
always fun to speculate
Yee
Still no news on specs
Bottom 1 is for Charging, top one is OTG
So charging cradle compatibility is still there
Wait wrong chat, I'm mixing up the Powkiddy one and this
Pk one we know the soc now at least its in that chat
We do?
Amd that it's too damn big lol
A133p
Nice
Kinda nice
We might get gammaOS on it then
Depends on gamma and what ram
Sucks that it's stuck with 1gb ram most likely
They should have just used the freaking Brick screen. They have it in house already. The rgb20 pro was right there
A clamshell Brick
Now we just have PK copying Anbernic, who is making a Differnet Device, that is Copying Miyoo
Yeah, and with two screens, one on the bottom and one on the top
Why he delete?
soon(tm)
could be an NDA for release
Maybe he was trying to schedule the video for after an NDA and posted instead
I am not sure. He did reply to some comments. Unless he got the embargo date wrong.
Pretty sure he just got embargo messed up
Man. That shit just makes it's forehead and chin seem so big
I don't know why they didn't just push the screen up and give it a large lower glass bezel like the OG gba SP
the one time they could've written ANBERNIC on a bezel and nobody would be mad
To keep screen away from the sticks?
that's the only thing I can think of
or them thinking it looks better 'centered'
I wonder if there's a world where they could've just made the whole device smaller in that dimension if they hadn't added sticks
it wouldn't look like a GBA SP really anymore tho
more like a mini DS lite lol
They probably are planning the next one already
all I want from them at this point is for their next budget line to be able to do vulkan on linux and be beefy enough for the full psp library at 1x res
and then to make a psp1000 clone as good as the 34xx is as their GBA clone
Oh that actually could be cool.
I'd like to see a low end android
But they would put stick/slider above dpad just to piss you off lol
I could live with android on my psp clone
I just want an accurate PSP clone that runs PPSSPP well
That was magicx's job
Who is showing only a little bit of life right now
Or do you mean like a clone like 34xx vs gba
Acutal clone of course
yeah I mean straight up shaped like a psp
the way the 34xx is shaped like the OG GBA
Oh good luck with that lol
but yeah at this point I'd accept any flat pocketable slab that actually runs and renders psp well
everything so far is either not pocketable, doesn't have a good screen for psp, or doesn't have a great chip for psp
Every once in a while we get one of those cursed ones
and dpad top goes without saying for a psp clone
so far the rgb10max3pro was one of the best but it was a bit big and amlogic jank = no sleep, res wasn't amazing for psp, etc
mone41
rp5 is good other than not being pocketable
rg505 and rp3 are the closest
yeah I need better
Which one is that
Oh the pone41
whos calling it the psp one 41
It's more descriptive
vone is better
do we know what screen was supposed to go in the 41 res wise?
Maybe in appearance, but trying to play vita games on it would be a pain
nope
its 16:9?
Hopefully 1280x720
Good res
Wouldve hoped for 768p but eh
768p has tiny black bars
Does it?
We are blessed with Shaun inman
1080p scales psp real well
just have to crop 1 pixel top and bottom
and its a 4x integer
That sucks
...
Imagine how easy it would be if Sony didn't give the psp and vita wacky resolutions
I feel like they'd be fun to mod but I'd rather play with emulation
For the cost of buying a PsP, I think buying something that Emulates PsP with the Ability to Upscale seems like a better idea 🤣
The build though
Sliders are good shit man
And mini USB and a umd drive
Archaic bullshit
Memory stick pro duo
And this fucking DC jack
Is this not appealing
yeah I want usb C
Neither was UMD lol
not more proprietary power adapters
At least you can Buy 3rd Party Adapters now on Amazon to convert them to Type A
It's not proprietary
DC jack
And mini usb
I'm using some random dc plug
Iirc it is possible with the h700
But we need to get a mainline kennel and Mesa working on it
Rn the h700 is using a 4.x kernel with out of tree patches and libmali
The vita isn't a wacky resolution
It's literally qHD. (Half of 1080p in both dimensions)
And iirc the psp is half of the vitas in both dimensions.
Besides the 1 pixel crop on top and bottom. Which is basically nothing
Well that's what I'm talking about, it's 544p
Practically it won't make much difference its just a bit odd
got a vita tv, run sharpscale plugin for 4x psp.... man is it glorious
love it for play testing my patches... though looks like for full feature debugging i still need to keep my PSP's out
That's what wacky means
I pixel off is insane
1
We should be getting these in for review anytime now, however Anbernic has an embargo placed on content this round, and we're not sure what the date is just yet. We should have content ready to go whenever that is though. 
Tell them to release the 477h next
Wierd they would embargo without a date, hopefully they arent holding back to see if things get better/worse (global shipping wise)
I dont think they win on that one
Yeah i'm not sure, I don't recall ever having an embargo from them before.
Ayaneo did one for the Ace, as a first for them as well.
I think what I'm most curious about is whether or not this will also have stock in us warehouses, or if it was just a one-off for the rg557
they could have been sitting on it for a while who knows but the 557 was more they got things on ships before the cutoff
Yes it will be in US warehouses, I did confirm that.
I believe that is probably the reason for the embargo
They don't want the launch to be dead in the water for US buyers like the 557
Only issue I can see arising is if they're shipping ocean freight on the cheap they will likely arrive with pre-release software (since its H700 it might not be so bad) but id expect US orders might need day1 patching
If they're supplying a US warehouse air freight on large amounts is turbo expensive
so these units are probably going to be on a ship 21-30days
wouldnt be out of the ordinary for last minute issues to be patched in that time
That thing is going to be colossal lmao
GOOD
So long as it has analog triggers
Great
Embargo ends May 16th 18:00 Beijing time (3am PST)
$59.99 first 72 hours
$66.99 retail
So like
Maybe RIP V90S? 
I'm gonna put thick eyebrow stickers on my rg34xx SP's forehead
If this was a true "Microsoft" handheld, that extra space would have just been Ad Space
Does anybody know anything about dev units and if they’ll be sending any to the US? I used to get literally every anbernic device but I never received the rg557, so a little worried they just aren’t sending dev units anymore, at least not to the US.
I would speak to your contact, im not sure on dev units. 
Does the US stock have to be bought from Anbernic's website or will it be available on Aliexpress?
This is for US inventory?
thats pretty good
I'm telling you, this is the one
HHOTY 2025
If Powkiddy doesn't have US stock or a way to get around the cost of the tariffs I don't see the V90S selling too well.
In not sure which of their shops will be US stock on launch day, guessing Anbernic's website. 
Guess we shall wait and see. Thanks for keeping us up to date. This is the best place on the interwebs to find info on these handhelds before launch.
There were a lot of straight up psp clone like 10 years ago but those were absolute e waste
embargoing reviews until release date is lame as fuck
that signals people that you are not confident about your product
They pulled an ayaneo
that bringus review was so good
i have hated ayaneo ever since
Pulling a Nvidia, with the 5060
That would be due to the tactile switches being more difficult to press. Both the Vita and the GBA SP used softer tactile switches that are less loud, but easier to press and still feel tactile and clicky.
Funny enough, I ended up recently getting a Miyoo Flip I outright forgot I preordered several months ago, and that thing’s tactile switches are shockingly great, to the point that they outright feel more accurate to the original GBA SP tactile switches than the RG35XX SP.
I wish the D-pad was a deeper press though
I'm sure if I used it for a while I'd just get used to it though
anbernic dropped the ball on both 2025 devices so far imo
The other being? 557?
yep
here's hoping their 4:3 4.7 incher redeems them
Hell yeah
Please 1440p
Idk I just need a super sp screen
Ain't no cheap Chinese Handheld designed to be a toy, that cost under $200......gonna have 1440p
im really hoping for something interesting
and wonder whats going to replace their XX line in a sense
as in whats replacing that H700
I wonder if this 34SP will eventually release in other colors. I’d like a transparent white like the 35SP.
I think the 35xxSP got new colours because of how super popular it was
I don't see the same happening with the 34xxSP
I see the 34xxSP Being the new RG ARC, small Cult following long after it is released lol
In terms of pure function, it'll be quite good at what it does
The problem is how it looks
People really don't like the 5head
It doesn't bother me that much
But the colour selection is actually fucking terrible
American SNES and Pikachu are neat
But black and and especially GC blue with skittles is taking years off my life
The GC blue would be so good if they just kept the buttons all grey lol
But no
SKITTLES!!!!!
What's a 5head?
I think he means forehead
It's one bigger than a 4head
It's still wild to me this thing doesn't have any colors actually based on the gba sp like how does that even happen
Most GBA colours are metallic
I mean the 35xxsp was able to pull off the sp silver at least
All I can speculate is that silver is probably easier to get consistent than something like cobalt blue
I love my green 35xxSP lol
Fuckery department
Yeah that would be great. Maybe you can spray blue on top of a silver 35XXSP
Honestly spray and seal and it'd be pretty good. Not sure if I could get that exact metallic sheen. But it may have to be a future project
who needs any other colour than red?
My red 35SP is probably my best looking device
I have an arc, going to be working on it with knulli soon
So this is out Friday?
Fuckery department had what, 3 months this time? Really shows
The RG34XXSP features a classic retro flip design while also being compact and portable. It has a 3.4-inch IPS fully laminated screen with a resolution of 720x480, providing a threefold pixel-to-pixel display when playing GBA games. The high-quality alloy hinge ensures stable, smooth, and durable opening and closing. The imported button design o...
Wait
So there's a magnet in the top of the device?
And that's why there's a 5head?
Or has it always been like that
I'm confused. What does the magnet do?
It's also just how it snaps closed
I don’t think so
Different kind of magnet
Technology is the same as all the Hall effect joysticks people talk about. Magnets aren’t strong enough to hold anything they just have sensors that measure the magnetic field
I'm just saying it has magnets in the top and bottom so it has a definitive closed state
Guess I’ll find out. That’s definitely different from the 35xx-sp
D-pad and face buttons are confirmed to still be dome switch connections
Hopefully lighter to press than the previous SP
I’ve no idea where they squirreled away a magnet strong enough to hold the lid closed anywhere near the display and joysticks
You probably wouldn't even notice it if you didn't know tbh
I don't think it's gonna make much difference
Nothing special mentioned about the sticks, so safe to assume they're just Switch style
Biggest pet peeve for me with these clamshells is actually the shoulder buttons lol
They really should make L1 and R1 wider lol
The magnets are there on the rg35xx sp as well
They're not strong magnets, but they do keep the lid closed more firmly
You guys seen this? 
I'm still not sure I'd buy it because of H700, but no sticks and a different screen bezel make it a lot more attractive to me
That'd be sooo much better!
So Max originally had the right idea, but then he got a visit from the fuckery department
Stay strong, Max
Have they confirmed if they had L3/R3 or not? And even then, they’re more likely using the same “PS Vita with clicky sticks” design that Miyoo used.
would have bought 2 minimum
They didn't directly state it, but in the unboxing video, it looks like they're demonstrating the sticks clicking at 2:40
that's my perfect GBA device right there
It does appear like they have them on the unboxing video
So then it’s either the Miyoo’s sticks, or it’s the switch sticks modded with Vita stick tops.
I assume the Miyoo sticks are the latter
Why on earth did he change it! 😭
Power move to Miyoo ig lol
I would have vastly preferred a centered, more narrow display with a visible screen bezel vs... this
I'll put a funny sticker on the 5head or something
Put an Xbox logo there to confuse people.
After all, everything’s an Xbox.
“Yeah, I love my Xbox handheld, it lets me play classic Xbox games like Pokemon FireRed, Mega Man Zero, Final Fantasy 7 Crisis Core, and Persona 3 Portable.”
"They thought it looked too much like the 35SP" is what I would think if it weren't for the fact that Anbernic has had no problem releasing 200 devices that look identical in the past.
They're doing better now 😌
You know what, you’re right.
I’m actually surprised, I didn’t think Miyoo with bother spending the money to do that, assuming they’re not the GuliKit Joycon sticks that you can semi-easily remove and make replacement sticks for.
It sounds dumb, but I was kinda hoping Miyoo would get the 557 sticks
Well I wish they weren't 
…Honestly yeah, those in the exact size and pivot as Anbernic’s probably would’ve outright been better for clamshells than on something like the 557.
Why'd I say Miyoo
I meant the 34xxSP
But those sticks for both of them would be nice
They're basically the nicest sticks you can get on a clamshell that compact
The ones that Retroid and AYN use are quite a bit taller
Yeah, although I will admit I still really like the way on how they handled the sticks in the Flip 2, I still think analog sliders are better overall for clamshells.
Even on non-clamshells, I'd take them over Switch sticks anyday
Idk why people hate sliders so much
Yup, apparently the only reason why Retroid didn’t use the sliders anymore is directly because of the sheer volume of complaints they were getting in emails over them being on the Flip instead of using sticks.
On a higher end device, I do see the problem with L3 and R3 not working as well as on sticks, but that's only really a factor for devices that can play a lot of PS2 games
the SP we want
....the SP we wont get
This whole thing honestly feels like "hey, it's been a few months we just need to make something already"
Hope they're cooking something cool in the background
Like a decent cheap PSP handheld or a DS clone (I'll never stop hoping, I guess)
Max said there'd be another release this month, didn't he?
I think that was 557 and 34, no?
Wasn't 557 last month?
No that was their vacation
They took only a day to fuck shit up
anbernic's fuckery department has taken to mildly copying other companies designs to fuck their own devices up
Extreme laze
Apparently Max Zhou is not the part of fuckery department as his initial design was much better:
funny its a contradiction as you guys are fine if they are copying nintendo

well as long as they're not copying me then it's fine
seeing how people get mad at anbernic for copying miyoo but not mad at them copying nintendo
I'm mad because Miyoo's design is bad, personally.
they at least improved on the hinge coz miyoo's hinge sucks ass
Sucked Ass*
Better now, still not perfect. Hopefully v3 comes soon. Rest of the device is pretty amazing
fool me once, shame on you, fool me twice, shame on me, who is lining up to get fooled a third time? lol
should've given us this and then a 40xxSP with sticks
Because copying Nintendo is basically the whole point lol
people aren't mad at anbernic copying miyoo because they think miyoo's gba SP clone deserves protection, they're mad at anbernic copying miyoo because the miyoo flip is not a good design and anbernic could've done better lol
My 40XXv is kinda thick as is, not sure halving the height is worth increasing thickness by 50%.
why would an h700 with a larger footprint than this one need to be thicker than this one?
Isn't the thickness the biggest complaint about the 35xx?
the 34xxSP already fixed that
it's no thicker than the miyoo one
I'm saying gimme the 34xxSP but wider/taller with the 406 screen
I waiting to see what the next 4.7" 4:3 device they are cooking up or if they do a new 40xxv with the 406v screen and better CPU
34xxsp... If only they kept true to their original design I'd have maybe budge for nostalgia
But no we have to flex on miyoo for.... Reasons... I guess
yeah a pocketable handheld with the 406 screen and vulkan support on linux for slang shaders is my dream
whether that's done as a vertical, horizontal candybar with inline shoulders, or clamshell is kinda irrelevant to me
for me I actually really like the 34xx(not sp)
The thickness argument still amused me
The miyoo is 24.5mm and the anbernic 35xxSP is 27mm thick
I don't get it either, but apparently plenty of people are willing to buy a whole new device over a 2.5mm difference
Every MM counts lol 😉
Well yeah, I generally just play my handhelds with my hands, but this does explain some things
Didn't know we were talking about that kind of pocket
For me 2.5mm is the difference between pocketable and not pocketable
The og sp is pretty much my limit for how thick I'm willing to tolerate
that said I would kill to have a 40xxsp regardless of how thick it ends up being
The og SP is pretty blocky in the pocket, but I’m not sure if the miyoo or the 34xxsp would actually be better
Best with a Grip to enjoy the sticks
But also the bigger the screen and bottom casing the more volume they have per mm of thickness so a 40xxsp should be able to be thinner than a 34xxsp
I haven't seen a good quality grip that's cheap enough for me to justify buying it, I'd rather just buy a device that already has grips
Is $23 too expensive?
Kinda, for example my r36s was $19
Yeah, that 406 screen just might be the best thing Anbernic delivered last year
easier to justify if it's a more expensive device but in that case I'd just get something with more ergonomic stick placement to begin with
Not arguing "Just get a Better device" logic lol
Just the Chat we in, $23 fixes the Ergonomics & keeps it pocketable. At least for me lol
This is me. 35xx sp made my hand cramp because of how thick it was. Miyoo flip does not. It may be slight but it was painfully noticeable for me.
Whose making this?
Not anbernic apparently 🐈
I'm the opposite, which is weird because I've got smaller hands. I prefer holding the SP over the flip, but I greatly prefer the buttons/dpad on the Flip.
Oh that is weird because I’d say I have smaller hands too. But yeah the buttons and dpad on the flip are top notch
dear lord, what did they do
they had it right there
yeah but now you can play ape escape with lil baby sticks on a 3:2 display
And Half-Life 😛
Society if they had gone with the original draft
can someone with photoshop skills show a 4" 1:1 screen like those in rgb30 fit in rg34xxsp
ngl that's my end game devices
My estimation turns out to be quite accurate
no
Who knows, maybe Max's boss is a huge Ape Escape fan
did the half life 2 and portal ports work on the original RG35XXSP? I remember getting it to work on my RG35XXH but never attempted to try it on my SP
They shouldn't be any different
It should only work better on the 34xxSP as well, since it got a RAM upgrade
gotcha!
Without the sticks? Good luck, dude 
I'm saying if it worked on the rg35xxsp it should work on the rg34xxsp since they have the same chip
might work even better since the rg34xxsp has more ram (not sure if this is confirmed)
Huh, missed that. Curious why they added that
I mean, it's not simply higher res screen, because 34xx non-SP has 1GB
Also curious if it's just one 2GB chip or two 1GB ones.
Maybe having two memory chips could give a performance boost since it would be dual-channel?
That'd be nice, but I doubt Anbernic would spend extra for that.