#Anbernic RG Cube
1913 messages · Page 2 of 2 (latest)
Lord do I know that feel tho
How's Saturn on T820?
Yabasanshiro should run fine, I don’t think it’ll do beetle core for any games that need the more accurate emu
saturn stopped being hard to run with the t618 devices
Until you want to use beetle then you need an odin 2 or x86
this is kind of like when someone doesn't have the beef to emulate upresed ps1 with duckstation, so they give up instead of using psx-rearmed's upres mode
ultimately becomes a heuristic question of what makes the gamer happy and less worried about getting the 'best experience.'
it's kinda weird we're about to get an fpga cheaper than an emulator for saturn
Per Russ, if you don’t care and go yabasanshiro you can 1080p pretty much all games
psd?
silver is nice
only slightly smaller battery than the 556
curious how high end emulation you can do before you have to use the fan
If this and the SP are half as good as they look then Anbernic has really crushed the first half of 2024. I feel really spoiled for choice right now.
yeah honestly that looks tempting....
Gotta admit these look clean
That battery is pretty nuts for this screen size and chip combo.
yeah thats a chunky battery. 556 battery life overall is pretty good
The Unicorn is about the same weight if this scale is accurate. Don't know if an official weight figure has been released anywhere yet. A bit disappointing since it has a slightly smaller battery (4500mah). TPU protector adds a lot more weight, definitely don't plan on using one personally.
Interesting, for the cube to be lighter despite those chunky grips I imagine it’ll feel a bit hollow
Nope, Max Zhou actually posted these https://tieba.baidu.com/p/9013278002
RG cube工程样..紫光展锐T820,8+128,霍尔摇杆,堆叠式RL霍尔线性扳机,4寸720x720方屏,5200mAh(4.35V高压电池),立体声双音腔喇叭,主动散热,重量256克。。。。
He may have posted it but those are definitely digital edits of the same prototype unit
The leaves on the trees don’t move at all between shots lol
Doing the white and red like the unicorn feels kinda rude tbh lol
I have a terrible feeling he's going to cheap out and not offer us that glittery purple one. Looks so damn good.
How petty do you have to be to just take the other guy's color
There’s petty then there’s anbernic petty
They did a silver metallic for the 35xxSP so we might get that one for the cube
The metallic silver is one I'd normally be all over, but after this everything else seems like a downgrade
Quiet you, that pettiness is exactly what’s getting us a square screen Android device that can play good 3DS and is actually likely to be readily available.
Like, I don’t want to assume it, but the fact that they said the “8GB-Ram” option wouldn’t be available to international buyers anymore because all of them got bought locally honestly doesn’t suggest something good.
Unicorn messed up. If they had let me order in April, I would have put my money down. Now I am in camp cube. CPU is better than G99.
Bro is busy 😔
I feel like the Unicorn would've been the moment Lao Zhang broke through to the mainstream (at least by Chinese handhelds standards) if they had just released last month at a good price
No
Granted, it is a good price in China.
Put the T820 in a clamshell you cowards
Makes sense to gain experience on manufacturing a flip device with a cheaper device first
No? 🤔
Higher end flip device will appear eventually
IMO the Unicorn really needs to get the price right, otherwise it'll be DOA if the Cube comes out at the same time with similar pricing
We'll see how pricing matches up
if the unicorn gets gamma lite that would be a selling point for me tbh - even when the android stock rom is 'fine' I like the fully de-googled experience on my 405v better than the standard on my odin 2
Like, given the RG Cube is apparently planned to be around $140, that will just straight up kill the Unicorn if a device that is the same niche, more readily available, and has overall better specs, is released around the same time for cheaper.
and I doubt anbernic's stock rom will be as good as the odin 2
they're both 999 RMB domestic
and we always pay a premium over domestic prices in the west
so they should be more or less the exact same price
they may go with different markups for westerners or may have different shipping costs though
Yes, and Unicorn also said the international pricing would be more, while I’m pretty sure Anbernic never specified if it’s price was just domestic or also international as well.
all of their previous devices have been cheaper domestic than international
How does one go without dark mode?
Pretty well
pretty sure Anbernic can do a 'cheaper' price in the west than the Unicorn
same thickness as the rgb30 at the screen, obviously the grips and sticks ruin that, but it's actually a bit shorter which is cool
I'm assuming the grips/shoulders/sticks will mean not pocketable but frankly the rgb30 is already pushing that a little
no width measurement?
I kinda want to see the back
oh but shit it's not actually thinner than a closed N2DSXL because of the shoulder bumps 😩
I hate when the stacked triggers just have this lil "bay window" instead of making the device as a whole thicker and more ergonomic where you grip it anyway
it's incredibly funky that the Unicorn does it right, but has inline shoulder buttons and the rg Cube does stacked ones and fails 
like there would be enough space for stacked ones
You can see the back in this briefly
that's the vid I just screenshotted
it took me a while to find the vid...
that metallic paint job looks kinda nice
ah thank goodness, even if I'm not a fan of having this lil indentation below the trigger
That paint and color is like 90% of the reason I haven't already commited to the Unicorn yet 👀
I'm a lil sad the Cube will not have front firing speakers
at the end of the day I will probably get both tho
and then still use the rgb30 
I definitely can't justify owning three 1:1 screens
not entirely sold on justifying two tbh
but I do love the sega style dpad
I'll probably stick to the rgbs until/unless one of these two gets good Linux CFW
yeah, as CFW for the rgb30 improves (and more options become available) the appeal of moving to an android only handheld for my arcade machine shrinks
but at the same time that rg arc dpad is amazing for arcade
I'm having trouble justifying one
play dodonpachi once and it gets easy
though honestly I'm kinda liking playing that on my 28xx in tate mode
I feel like I can make do with a Fold even for that
oh yeah if you already have a samsung fold then sure
honesty the minute retroarch comes to ipad I'm buying a kickstand that can do either orientation and throwing my m30 in my bag next to the ipad at all times
hard ps2 games bruteforced to run full speed using turbo @101% or higher.
wii and switch will make the fan turn on as well, but that's it.
This looks amazing 🤩
got a width measurement pic?
hrm... the thought of selling my TSP and OGS and just getting one of these becomes a reality
reminds me a bit of the arc there
full pic of the black. I think it's fairly safe to say these two will make it as color choices.
oh please no red buttons on the black device...
just buy the two colors and swap the buttons
Wish Anbernic would drop the Xbox-like colored letter buttons
certainly not, if there is no color option I like I will just skip it
White looks so much classier. Or not labeled.
do we have an overview about which color options are currently considered?
Oh I like the black one
It'd be a mistake not to do that metallic lavender
color choices are always nice, but not having a (transparent) black/white option to pick when I don't particularly like one of the more wild ones would be a huge bummer
metallic colors look nice for about 5min 
I wonder about the wear on those metallic colors
the metallic silver looks nice, but judging by how those usually wear down, I wouldn't buy it
true, but it's not like white doesn't yellow or black doesn't... well okay, black is pretty safe I guess. Just a bit boring
but honestly I don't keep any of these handhelds long enough to care about any of that 
man these colors are repulsive
especially the black red combo is atrocious
The white and purple is nice looking in a vacuum imo, but the metallic fuschia or w/e is basically the same appeal but 10 times cooler. The red buttons definitely mess up the black
a transparent black one to but next to my Unicorn would be fun 
While I agree Im a bit conflicted about using that one in public ;))
transparent black and transparent purple on the cube wouls be funny as sht

the spite would be insane, and fun
Id rock the japanese lavender 2ds in public though
I kinda want the cube to use the same colors as the Unicorn now, just for the beef 
the white cube kinda reminds me of the white lavnder new2s
would have been so nice if that one would have just been white
Copyright ❌
Copy, right? ✅
they could have done the Unicorn 1:1 with a better chip and I would have walked away happy, see no issue here 
What was that in response to?
To the potential copy of the the colorways
What would you want to play on that screen that the Helio G99 can't handle?
more GCN/PS2 
yeah, a lot of moderately difficult ps2 games seem to require pal roms on the g99
GoW etc
I'm not sure if I'd want to play either of those on a screen that size.
man the fact that there is a retail xx sp next to it doesnt make it better
might just skip this one and just cop a 320g odin
this couldve been so good
Yeah but that render is so bad
This is such a beautiful device in this theme
the cube looks so pretty and tempting even for an android device
anbernic mogs the market again. contrarians cry and buy more ewaste to protest. news at 11
I just got an external HD on sale to be a network accessible drive to keep my existing handhelds + roms easier to use that ate the budget I had set aside for the unicorn/cube showdown unless I sell some stuff
I guess there's going to be a grippy texture on the back
weird decision to not have it on the whole grip
drop the picture all at once 
suck all of baidu up and spit it out
just release the device now
spite has to get this to me before the Unicorn 
This device sucks proceeds to buy 10 ewaste items they’ll never use that add up to more than this
Everytime I want to buy an Odin 2, I remember that I did exactly this 😦
A move I never recommend
Not counting the nintendo-made console I've purchased since I started the hobby, I think I would have to multiply the number of retro consoles I've bought by 5 before the total price matches the O2.
Of course, taking my switch lite, modded GBA and New 3DS XL into consideration , the balance probably changes.
A fully modded out GBA probably costs not far from the O2 base lol
Even though it's pretty powerful for what I'm gonna play on it, I'm excited for a good quality device with this screen
The more I read up on this the more i kinda want it 😅 gotta wait on price/reviews ofc
this could be nice potential upgrade fpr rgb30 .... but cant really justify it atm
maybe by the end of the year
(still hoping the mythical 406 happens too by the end of the year)
Man I still can’t believe how ugly this is
Pls goober or lei I need new leaks with other color
breh this looks fantastic you're goofy lol
the pink & white ones!
I can’t whip that one out in public though 😭
besides that one only looks bad because of how smudged up the display is lol
you absolutely can
Nah it’s definitely the black on red
Plus that seems like the fingerprint black finish from the 556
you whip that pink one out in public the only type of attention you'll get is good attention from people you want attention from, and bad attention from people you don't want to be talking to in the first place 😏
someone talks shit about it they're prob homophobic tbh!
but you're gonna be a bit more approachable if you're a dude imo
Aight I’m not that worried
cuz this is flat out stunning imo
and this one 😍
tbh i love the black and red look
Im more worried about the games I run on it not fitting the aesthetic
That’s why black is usually such a good color
Guess I’m alone on that one then 😤
the black one definitely looks the least premium
but that doesn't make it look bad imo
it just looks more typical
rofl you goofy af bro 😂
Seems like the pink/lavender one looks very differently on different shots
Kinda funny how Anbernic decided to go from the most boring, "work-friendly" colors (most people would probably assume you're holding a phone) straight to RGB-lit wacky pink and transparent colors
The pink one with white buttons comes kinda sorta close to the indigo colors, and with RGB off looks okay IMO
ANbernic: this one's for the ladies
I need transparent black, end of story
Of course you are. Red on black is the coolest
Before anyone asks, yes I did do that just because I thought it would be funny.
Wait, I forgot to change the user name color. Man, now it’s ruined.
My eyes
I know, Shadow with a blue user name is just wrong.
Better
Also, we must encourage Anbernic’s pettiness. It’s what’s encouraged them to make their own SP overlay specifically for the 35XX SP, and actually putting the effort into adding a “lid closed” sensor where most others just don’t bother (including even Nintendo with the actual SP, meaning they’re not just making it like the SP, they’re making it the upgrade).
And now it’s getting us the RG Cube with a chipset that actually can handle upscaled 3DS pretty well, with some great color schemes shown so far in the white and metallic lavender Cubes.
Metallic lavender won’t make it to retail I assume
But we see
RG556 also only had two colors, one of them beim fingerprinty black
Ironically I think this is good, but I’m biased since it’s the setup for so many Edgehog memes.
Edit: Good god have I used “unironically” that much more often than “ironically”? That autocorrect would default to it?
At the very least that one didn’t have red face buttons and shoulder buttons
How does that make sense
U make an atrocious finish on of your devices and decide to use it for your next device too
I’m mostly thinking of the jokes you can make with characters like Shadow the Hedgehog or Ryuko Matoi saying “finally, a handheld as cool as me!”
Max Zhou’s spite should get us white with red controls on the cube just to further cannibalize unicorn sales
That’ll probably also cannibalize at least a few of the Pocket Air sales too.
Yes, I know the Pocket Air isn’t as readily available anymore.
I just know that there is likely a non-zero number of people who were looking towards the Pocket Air specifically for the color scheme, and Anbernic getting those very few people instead with a Square IPS Screen handheld would be funny as hell.
Like, just the insult to the injury they already personally inflicted with the 556.
Just give us all the colors the Unicorn has to offer and more 
You aren't allowed to have one if you don't praise the 1:1 
idk if i should buy this one or the rgb30 🥺
has to be this one 😄 I like my RGB30 but i am very curious in this... if the price is right...
I don't know, I still don't see how playing this d-pad is comfortable.
People also hate the RGB30 D-Pad 
i mean isnt this is using the same chipset as the rg556?
Yep
then why would the price be right
There is a right price for the t820 
150$?
hello do i know you
No
thats kinda expensie but i have a feeling it willb e close to 200$
wullf den on youtube
No Joey’s Retro Handhelds on YouTube
Do you really need another device with the same chip as your rg556? 
Also both, both is the obvious answer
For real? I thought @topaz mantle was just a fan.
very different prices and capabilities. you can get rgb30 for ~$80 shipped. This will be closer to $160. RGB30 maxes at DS. This can do 3DS.
Like that guy who made a video with his face titled how he was wrong about something or the other
If I’m wulff den then the Odin MiniLED has a 3:2 screen
Don't be so naive, Jigg is one of the kids running around on this server 
also RGB30 has the dpad in the right position. This one has it in the wrong position.
So not even a fan.
im pretty sure i seen the rgb30 closer to 60$ actually
Depends on the country, Germany it's generally 70-ish€
But yeah it was a joke about that other youtuber that clickbaited me with his face
Aren't we all clickbait? 
Journey to Silius OST ❤️
What do you guys think will be the price of the Cube?
I don't see this being priced more than $150, but I don't think Anbernic does good pricing either, so coin toss. 
Well, domestic price apparently is $140, so it will be more
Also I will get vatted to oblivion anyway so 170-180€ for a cube seems realistic enough
160€ would be nicer and most likely cut the Unicorn 
150-155 usd (plus shipping) is my guess
It's hard to price it more than that with it being a gimmick format, at least for most people
Well, I always include shipping and tax in my estimate, no point in claiming a rp2s is only 99bucks and then I get slapped with 30bucks in shipping and tax
the problem there is that most people on this server don't pay anywhere near that in shipping and tax
for anbernic devices I pay $12 usd
Does anyone know what the domestic chinese launch price was for the 405m?
or any of the anbernic devices tbh
just looking to get a good feel for the usual difference between domestic and international pricing
my brain is tired, I hope someone will make a comparison table between this and the unicorn
I can't tell them apart anymore because both channels are spammed with both
Unicorn is the one with the good speakers setup, easy to remember.
Lol i thought the same thing.
What are reasons someone would prefer this over the RP4 base (aside from the rumored $10 price difference)?
(Not a facetious question- just enjoy knowing what other people prefer in a handheld)
1:1 (720x720) 4" screen vs 750p (750x1334) 4.7" screen.
Arguably better suited for DS games and Pico8 (of course).
Smaller, more compact size and better pocketability.
Glowing sticks may appease some.
*750p
The RP3 and 4 are really cool but that resolution triggers me
B/c they don’t play nice with scaling?
It was fine in practice for the 3/+, but with the price of the 4/p they really should have used a better panel
They did that to keep the cost down, I assume?
Totally
I have an RP4P and have no issues with the screen, personally.
It's "fine", but it's not whatever they were charging fine
I definitely agree with that.
I'm hoping we get some photos of the RG Cube alongside the RGB30.
This is running Android, right? Unfortunately, no splore on Android
Winlator.
Hmm
Both run Android.
rgb30 is Linux-based, has native pico-8. I think there's a build of gamma core coming if you want android tho
Hopefully the no touchscreen optimizations are good
We're talking about the RP4P and the RG Cube (which both run Android). I made a side comment about the RGB30 for ergonomics.
Winlator really depends on the game. Some games run fine, others are a big sluggish. Celeste isn't very playable, for instance. But Kalikan is great.
Unfortunately there is no native pico8 for android.
Yep, I know
That black and red version is heinous
Petition for a wood grain cube
The black and red is weird like go all the way if you're gonna do that! At least do red d-pad and buttons!!!
if it was all red I'd be happy
but probably would still pick white shell with red controls over black shell with red controls
People turning to liking this yet?
no
Tuff
always have
King
u know what
i might cop black
if it wont be the same plastic as on the rg556
I want my real 405 successor
King
Fair
is the dpad on top yet? 
The dpad is kind of a deal breaker for me.
Went from "hate this design" to "eh, it's okay", but still just want a 4:3.
Also worried this means they're less likely to do a proper new Arc this year
I was also in the camp of "black is the fingerprint magnet", but then I look at my black Arc D and it's actually pretty clean after ~6 months. Guess it really depends on the plastic
i could maybe upgrade to this from rbg30 if the price is right (so probably in sale) and find buyer for rgb30 ... but will probably wait it out for proper 4:3
similar case would be if they did updated full DC/Satrun cabable arc with a stick
Gotta say, their lineup this year is crazy
35xx+
35xx+-
35xx h
28xx
RG556
Cube
35xx sp
So 7 devices in five months unless I'm forgetting something
I refuse to play 2D Mario with an analog (I know all the dpad on bottom people secretly play with the analog stick)
I meeean, it can be done, but without handles and with the d-pad hanging that low? I keep looking at my RGB30 for reference and wondering.
You'd think 1:1 being a gimmick format would be free from the analog on top menace. You can argue for 3DS use, but honestly its layout is awful.
They are basically trying to inb4 all other companies 😂
ensuring they have an option for every single other device released by powkiddy etc..
Makes me wonder why they blow their load so quickly
At least some of the devices in that list came out last year and some aren't out yet, so no 7 in 5
They are clearly aiming to phase out all 0/1/3/5 devices with the XX range and the 6's, the high rate keeps eyes on their website, so new releases serve as advertising for the full range
And yet we still didn’t get a 1:1 XX line handheld to compete with the RGB30 and rgb20SX
I kinda thought 1:1 wouldn't take off, let alone Anbernic would join the race
probably any plans for one of those got pushed back with the cube seemingly moving forwatf in their schedule
An RG1:1XX would be kinda cool, actually
I’m sure glad it did tho
Of course powkiddy was the first to try it
They just throw shit at the wall and sees what sticks
That's true is he all over an anbernic version of the RGB30
Probably call it the rg40XX cube based on the naming choice for that t820 model
Because the Cube exist only out of spite for the Unicorn creator, the Anbernic dude doesn't believes in the 1:1 supremacy
dpad seems fine. just pull yourself up by the bootstraps and play
/s
the cube dpad is going to be good mechanically
not sold on the ergo of its placement
but the rg arc dpad is my favourite handheld dpad
I'm more worried about the sticks. If this is using the same ones from the RG556....
I'm sure they'll fix it. any day now...
there is a lot they could fix just in software tbh with those sticks
It has to be software considering swapping the sticks does virtually nothing. all anbernic has to do is give a little bit of a fuck, but I guess that's asking too much
Have they confirmed this is exactly the same as the arc's dpad or just assumptions?
just assumption but probably a fair one - why would they engineer a second sega style dpad?
Out of sheer hatred for Zhang
I mean, by that logic their Nintendo-style dpads would've been the same on all devices
And I think it's fair to say a Nintendo style d-pad is simpler to make than any other dpad, that's more or less the whole point of it — less plastic needed, no moving parts, etc
Cube source code needs to be released to purge the last advantage of the Unicorn 
source cope
What’s the last device anbernic shared sources for? 353m?
All these complaints about the rg556 sticks are awefully similar to the Odin pro stick complaints
makes me want to get an Odin pro just to see if its the exact same "A little too snappy for most people" feel.
I don’t think switch sticks and how they’re handled by anbernic et al have actually gotten any worse, people just notice them more playing ps2 than n64
One would think SM64 would expose sticks harder than the average PS2 game
Its very subtle. That's why I want to grab one now. That was actually the last doubt I had.
That said, the sticks on my RGB30 are pretty fine
I can only complain about the X28. All. Day. Long.
Its one of those things where you're like "is it the gamers or the tech? Which one is the culprit?"
When in doubt blame the tech
Technically rg35xx via GarlicOS 2.0, no?
GarlicOS is not open source
Oh 2.0
There’s no kernel source there
It runs on top of the closed source stock
Ah, must be misremembering things
X28 is the tech 
Yeah.... Well this is a good time to invest in a clear Odin pro.
That adreno630 gpu is almost 4 times stronger than the Mali in the t820.
Odin has no 1:1
yet
Well, I will be interested if they do one, until then 
whats the point of 4x gpu power on a 1:1 screen? all the higher power systems that would need that power are 16:9
I'm not really sure myself tbh
I'm all for a powerful 1:1 device and it's not like 3:2 or 4:3 looks bad on it, but it seems like a hodgepodge of items more than a focused device lol
Seeing the fan grate at the back made me laugh
more gpu means you can run better shaders on the lower end platforms.
in theory
Or heavier port master games that can fill the screen.
In theory.
I love crt royale as much as the next guy but I guess that as well as the ability to use run ahead just cements just how niche this is
A really cool niche for what it's worth
Pretty sure the main selling point is decent DS/3DS coverage.
and ps2/gc. basically all systems before the 16:9 era
PS2 and GC are 4:3 systems.
this already has decent coverage of those systems, and im pretty sure to get more coverage you want more cpu power not gpu
although you can always use more gpu for more super resolutionj
Why yes it's what made me interested in it
Same
Absolutely and as a nice bonus Pico8

how is T820 with 3ds?
what games you wanting to play?
For 3DS, it's all about them GPU drivers
That too. I've got a fair number of 3ds working okay with the T820 but heavier titles are a nogo
if you have a list of 3ds games you want to play, i can test for you 🙂
but gonna wait for now ... "406" or "DC/Saturn capable Arc" will be prefered over upgrading 1:1
might ping you after work
no worries. Just dont request a list of 30 3ds games xD happy to do some tinkering though as im still testing the 556
I will also say that the sticks with led are kinda cool, hope there's a option for color and a shut off for power consumption
it's almost 100% fine with CitraMMJ. i think the hardest game is xenoblade, and that only struggles in the introduction sequence
The t820 is powerful enough to carry the heaviest ps2 games with at most a -1/2 EE underclock(SOTC, soul caliber 3, NFS:Rivals), and some mid-tier switch titles at 540p(Hand of Fate 2, diablo 3, unicorn overlord). The big issue is the gpu, which is weaker than what people are used to seeing in Ayn-tier handhelds.
as long as you avoid rigid thinking, you'll be fine with the 556 or the Cube. It's users that specifically want a zero-tinker device that should avoid it.
credit, there are people here that bought the RP4 Pro and then marketplaced their device because it wasn't a completely zero-tinker experience.
If anything straight Linux is closer to zero tinker than Android is
maybe? Desktop linux is a big no in that book
Well no not desktop. I’m talking about in handheld
it's almost there. THe Gameforce Ace has a decent rocknix build now
ive found some heavier stuff like monster hunter 4 ultimate is a nogo even with MMJ. I could be unlucky though or need to tinker with settings more
i think the trick with that was just to run it at 1x.
is this real?
is this real?
is this (pls dont mute me for spam) real?
I just want a transparent black one
it's anbernic
nearly all my anbernics are transparent black
I just want one 😛
DMG stays winning
I hope the bulk makes the d-pad comfortable to use
yeah Odin 2 really f-ed it there tbh
though maybe a little further to the right than the odin 2 which is nice
the odin 2 has enough grip to it that the dpad isn't unusable
but the ergo is definitely worse for dpad centric games
I played through aria of sorrow on my odin 2 and it didn't cause cramps or anything, but I wouldn't play metal slug X on my odin 2 if I had a dpad top handheld on hand
still dislike it if the 2ndary inputs are centered below the primary and having them that far down is pretty yuck
Cube pushing them as far as possible towards the screen is the right move, but I would probably prefer it if they would be a bit higher, at least it looks like there is still some space that could be used without interfering with using the stick/abxy
would have to get my hands on it to know for sure tho
I'm kinda mad we still haven't seen any GameCUBE purple colored option for the rgCUBE 
we don't see enough GBA/GC indigo/purple stuff period tbh
Indigo was mostly Retroid, right?
also where are my backpaddles on this thing? seems to have enough bulk for it 
Backpaddle android buttons 
anbernic, i kneel. it looks cute
well, two backpaddles would work great for 6 button devices without getting in the way of a normal face button layout
this is a perfect "run everything at 1x" machine.
bro is trying to summon @gray current
I'm just saying we need to normalize two extra buttons on the back 
MORE BUTT
NS
I would buy this
No kidding, I'd buy that in a heartbeat
dpad top, not too thick
I wonder if Retroid would really make something like this, if they would at least use a Helio G99 
Personally I’d be happy with a t610 as long as it was t610 priced
Wouldn't be elated with T610 by now, but it'd be a massive leap all the same to me
I just feel like I’m unlikely to play anything higher end than atomiswave/Naomi arcade on a 1:1
seeing how the 🦄 has a G99 and the Cube even comes along with a t820, I wouldn't mind paying more if they go nuts and put a d1100 or even the d1200 into the retroid pocket 2 form factor 
at least I personally would be happy to play GCN/PS2 on a 1:1 device
and 3DS emulation also needs a fair bit of power
There are TATE games stuck on Saturn, right? T610 would sweat.
that naturally would require them to join the 1:1 supremacy at all tho
That’s fair
at this point, just give us a handheld with an intel j5040 inside running BlissOS
Same. I'm feeling that periodic urge to sell everything I own and buy one device.
i was like that at the start ... that i wanted two ... one big for everything and one pocketable for daily commution
10 devices later ...
ok i failed
Haha 😄
I haven't reached the point of having multiple colour versions of a device
Yet
same, im not emotionally invested in color options tbh
But already pretty much have specific device for specific usecase or retro console
Yep, same with the colours, but i also have OCD. So take what you will 😅😅😅
Which is why Cube is tough sell right now ... while I am having a blast with rgb30
For colours I am weird one that I usually go for the weirder ones or ones I lack within my devices
Will probably grab cube/unicorn anyway during some sale
but noping it right now
(as i just did || the 7640u version of GPD Win Mini 2024 ||
)
My ocd usually makes me need 2 of everything. So i have lots of doubles. Not just handhelds 😂😅
I did have to stop myself getting aya pocket s and will try to do the same with ayn odin 2 mini 😂😅
I only have 2 of wii remotes
😄
I likely will be getting 2 cubes! Thankfully my wife tends to play 2nd devices i get. So its not all bad
remove the back buttons but i NEED
No, I want back buttons 
Really looking promising tho, hope it ain't disappointing
The SP releases tomorrow
you buying it? why?
nah depends on the colors
😭 wdym depends on the colors
what abou t the device
oh i thought you mean you buying the sp
maybe both
who knows
gba on a small screen feels more authentic
doesnt even have to be 3:2 since 4:3 with a gpa sp software bezels look really clean
im still trying to realize why would i get this over the rgb30 at like 3 times the price considering the aspect ratio mainly benefits older systems that can run on the rgb30 perfectly fine
the only arugment i heard is "3ds" and that, pardon my french, sounds like a horrible exprienece, to say the least
some 3ds are probably gonna be enjoyable
it aint cope
dude you are getting less than 2" screens each. its cope. thats even ignoring the majority of 3ds games dont even need the second screen
you are telling me you buy this to play 5% of the 3ds library? you remember the 3ds still exists right 😭
the moment gamma core drops for the rgb30 u can even play custom sized ds on your rgb30
rgb30 has no touchscreen
thats fine for a good chunk of games
its not like you pay extra for gamma core
just a bonus
you can replicate this on the rgb30
yeah.. i cant htink about something i want less than play on those tiny 2 screens 🥹 but have fun guys
I've said the word ARCADE to you like 15 times in this very thread
or do swap screen button i guess, that'll work fine too lol
games didn't only exist inside your house, I STG this hobby is filled with shutins
sure...
You can also substitute minimal inputs with touch cursor emulation
Yeah there are some drawbacks but the rgb30 is also cheap af
tbh cheap f is usually not worth it and STD risky
weird, considering most people end up getting f for free
Tbf I keep coming across reports like this about RGB30 https://www.reddit.com/r/SBCGaming/comments/1ct7q6s/i_bought_rgb30_and_im_nothing_but_disappointed/
(a bunch of hardware and software issues)
So if anything, Cube just might be higher quality even if you don't care that much about extra performance
It is entertaining to me seeing how many times you have to say arcade
(of course we won't know until early adopters buy the first batch, Anbernic is not flawless either)
dont slander my king max zhou
Still bitter about the light bleed on my Arc
I know other devices have it too, but don't think it's that major
tbh thats partially also just reddit being reddit
The rgb30 is carried by the screen (and even then backlight bleed issues are common). If it had any other screen it would have been immediately forgotten.
reminds me of what happened in steamdeck reddit lately .... when certain group of people went nuts and basically massdownvote anything possitive and mass upovte anythign negative
so anything usefull is basically killed
nah all 5 of those problems are common and widely discussed enough for it to be taken into consideration when buying from powkiddy
the steam deck subreddit is a strange place, tbh
half the time reddit "MY DEVICE DIED TWO DAYS IN" posts are pure skill issue, usually trying to use their chromebook usb C charger
so people being happy with purchase
dont post there
either, look at my deck while my wife gives birth, look at this entire suitcase full of crap that a gaming laptop would replace, look at me I'm doing something done 234098098 times already. lol
Well people happy with their purchase maybe just don't care about those issues
to be fair gaming laptops are absolutely terrible and equivalent APU laptops are way more money than APU handhelds for seemingly no reason
It's like a lot of people wouldn't notice sleep issues because they just turn their devices off every time
Or the battery indicator saying rubbish, because it's been a problem on a lot of Rockchip devices for years
The screen in the RGB30 is absolutely worth keeping up with the battery issues. It's as simple as that.
Sure when the Cube is out we might actually have a decent alternative. But the Cube isn't out yet :s
"Carried by the screen" is an understatement when there's no other device with this screen.
Well, there's the RGB20SX, which has the same exact issues as the RGB30 lol.
as someone who has bought a lenovo legion laptop I agree 
I am curious if the cube is the EXACT same screen. And if so will anbernic have better QC over light bleed issues.
Yeah I mean I guess there's a reason I don't have one anymore. The zephyrus G14 wasn't terrible, just loud.
But for price, you're right. Though with the cost of kb/m/portable monitor you might be adding another $300 to the deck price
which is still cheaper than a decent laptop tbh
like I'm not gonna do the suitcase full of jank to make the deck into a cyberdeck or whatever, but that's because I have a macbook pro that costs 5x as much
I don't have a laptop currently actually. I just use a tab s8+ with keyboard case.
If I wanna pc game i stream moonlight to it
yeah my laptop isn't for gaming reasons
the MBP does emulation extremely well but modern gaming on it is a meme
tbh reading the list
1 ) i got charger/cable working fine , and after i bough proper sdcard to put OS on instead of stock ... its been fine
2) the way i do is i alwas charge these devices before i intend to use them and i always turn off ... so i guess i never really noticed
3) sounds like cheap SD card issue rahter than device itself ... ArkOS has been working perfectly for me
4) did tapemod - been fine sice
5) user issue , dont buy from shitty place
Anyway more power to do whatever makes you happy. Those briefcases just look massive and silly to me.
so yeah the battery issues is a problem
but its well known problem of this SoC .... so do your research before blindly buying
OP stuck to Rocknix which is still beta.
Which is the stock OS on this device IIRC
For me it was just having dead pixel and massive backlight bleed. Paired with the subpar build quality feeling I wasn't interested in trying another one.
tbh i had realyl big issue with OS and bugs
but after i changed the SD card
all went away
Most of our devices have abyssal stock experience.
The charger/battery issues are the real killer.
that's the thing.
ArkOS can be set up to behave exactly like that
the problem is it needs the setup -..-
Yeah not every user wants to dig into tweaking
I mean, my Arc lasts for over a week on sleep and charges from anything except for maybe my Macbook charger. Same SoC though
your arc also has the same 4:3 screen every other device comes with.
it boggles me that mfgr don't put in the extra work to allow usb c pd charging
in the year 2024
Sure, but the point being, it's not the SoC
dude I went back to it
forgot how they really polished the stock experience with onionOS
It's not the SoC, but it's the chipset. Powkiddy did something really dumb with the motherboard there.
usb charging has more to do with the mainboard and how it's wired, IIRC, not the soc
It's not true PD but I think just adding some resistors allows using a pd charger, just at the slower non PD charge rates, which is fine enough for a handheld
literally like 5 cents of parts they omitted
lol
is your arc an arc D?
OnionOS is truly somethng else. Although kind of really dependent on having a device whose upper limit is PSX.
it's probably using the android kernel in the EMMC to handle battery monitoring
Yes
yeah adding a resistor at least allows a connection
Oh yeah, I'm using Gamma, but just saying those are not hardware issues
thankful the MM+, og 35xx and TSmart work fine with my c-c setup 
rn for retro handhelds i just have 556 and MM+ and both work with c
they're issues with rockchip's linux support
Tmart Pro?
C to C is gonna be a requirement for me going forward
I don't keep usb A shit in my laptop bag
it is the rare 4 inch one tho 😔
I worry about the sticks, really bad sticks from Anbernic lately (and in a software is totally fucked save your replacements way).
possibility that they copy the shitsticks and wifi chip
scary thought
I was thinking about this today, other than the screen, front firing speakers, size, shape and thickness, RGB30 is everything I hate about emulation handhelds. And yet I'm still mesmerized by the screen.
I want a better 1:1 than the rgb30, but will hold out hope for a 40XX Cube showing up eventually as the higher end uses of this are too niche for me to justify the cost
dolphin supports vertical widescreen-hacking, so all of gamecube should look fine. that, 3ds, ds are a good trio
I’m sorry what? Do you mean you can “tallscreen hack” gamecube games?
That’s wild if so, I’d love to see that lol
That could be quite a charming glimpse into an alternate 2001
Imagine being able to use vertical gecko codes to stretch the FOV but not the models… 🔥
you can do it to wii games too
most have a 4:3 mode, just make sure you have the wii's aspect ratio set to 4:3 (not the one in graphics settings, the one in wii settings) then enable widescreen hack and stretch to window
you could probably do it in 16:9 mode too but it wouldn't look great
yes
tallscreen hacking also works on wii, but ... you don't want that
it's 16:9 in a square, screenhacked to 1:1
the wii has a 4:3 mode though
yes, with black bars
if you go into the wii settings like i said and set the aspect ratio there
?
maybe dolphin has gotten better.
yeah, the real hardware works fine. dolphin emulation does not.
i'd have to try wii on the old 1:1 moniter again via dolphin, but last time, it didn't display properly. don't quite feel like digging it out of the shed at 2:30am
the problem is if you set it to 4:3, it doesn't render completely to a 4:3 rectangle. It sticks a 16:9 render in the rectangle and puts black bars on the top and bottom. dolphin has an option to crop off those bars and render the missing area(but it's pointless for this scenario, probably). that's what i mean
In this video I explain the details on why it is faster the speedrun New Super Mario Bros. Wii in a 4:3 aspect ratio rather than in 16:9. I also explain how you can change your own Wii or Wii U to this 4:3 aspect ratio.
If you enjoyed this video and want to follow me on Twitch, i do speedrun attempts live where you can come and chat :)
...
that's just this one game
it just doesn't supoort 4:3 properly
it's cringe, but it's only nsmbw
probably a handful of other titles too
Wii had proper 4:3 native like GameCube. I was always under the impression that 4:3 was the default and that proper 16:9 was added after (but also native and not stretched).
Anamorphic widescreen for the wii
Still 640x480 res just squished to then be stretched out again
It looks like they did
Dang I guess I was too young to notice, I don't remember the widescreen looking bad lol
wait u have a source?
Like I said. Wii is weird at 4:3.
Is this have the same chip as the rg556?
yes
fantastic
yeah same chip
its decent. Not on par with 4 pro lineup but for this size its pretty nice
I have the 556 and it’s pretty much Odin Pro level.
i have it too!
Thinking of selling it and getting this one maybe.
I might get it too if the reviews are favourable
No time for reviews if you want it for the cheap price like 556 was. It’s gone up almost $100 AUS since it launched.
huh?
And personally I am waiting for the 405m successor, but might probably get a cube as an upgrade for rgb30 by the end of the year , especially if reviews are good
I'm looking forward to upgrading from the RGB30 even though I do kinda love it, but since I have an early one I'm worried it is a ready to catch fire at any moment 😄
I want customizable wake sleep animations that cycle randomly like steam deck. That's arguably my favorite non gaming feature from a console ever and these handhelds are uniquely capable of copying it
the problem is that the rg556 is big so playing ps2 at 1x or even 1.5x imo doesnt look that good on it
for example
this would work much better i assume bc lower upscales will be way more tolerable.
What's interesting is the s922x in the ogu has a 3x stronger GPU, but a weaker big:little core layout.
They both struggle in their own ways
Alright Max sp is done and dusted time to ramp up the Cube marketing now CHOP CHOP
He posted these 3 edits again today. 🤔
the bottom one was my favourite #1168252795783225424 colourway, and it would be my favourite cube colourway too lol
there are some ps2 games that will be able to take advantage of tallscreen hacking.
Shining Force EXA for instance should be able to render the top and bottom black bars.
My body is ready for the skittles cube
Actually quite excited for this one 😅
I hope the lilac one is an option on release
heh, same fan intake design from the 405v
fuck i want one lol
it's cute, in this case i do wish they did both a dpad top and a stick top option
Yeah I can’t get another top stick device if I get Odin or Odin mini
If this had top dpad I could replace my rp4 with it
being so narrow they had the perfect chance to make it a little bit wider and inset the lower controls so both would be comfortable tbh
The really did „just enough“ to screw with zpg
Used all their effort on the xx sps design
Oh now the design makes sense
Man this color slaps so hard 💜💜💜
it really does
What device is the Cube closest to performance-wise
the rg556, same chip
Neat
its a decent chip
Looks quite comfortable in-hand tbh
Come on anbernic it’s been like 5 days since your last launch release this
Release this so you start teasing the real 406!
I'd imagine it's far along if there's already an all angles shot of a color done
Nah, once this comes out we will have at least a couple of months of XX models to fill in the gap
what do they have left? 35XXTATE (3:4 480x640 with the rg arc dpad for tate arcade games), 40XXSQ (RGB20SX competitor, hopefully without sticks), 28xxVM (RIP pixel)...
What's that? Game Boy with glowing sticks? On it.
arc mini (h700, 3.5" screen?)
A h700 3:2 successor to the rg351, a h700 4 inch 4:3, a sp plus with recessed stick etc
yeah , arc mini with 6 face button and to screw the GKD bubble
shit, I guess it's actually possible when you put it that way
i bet this will be simply fine for retroarch play
You're cooking with that first one ngl
dodonpachi is important guys
Let’s get it
351p and 280V updates seem like obvious additions to the range as they replace all 0/1/3 models with XX, but if the 406 does end up with a higher resolution display then making more use of their current 4" display would seem like an obvious move too.
If their approach is new releases equals advertising for the range as w whole then there's a good chance they will have to get creative with form factors to keep this 4-6 weeks per device kind of schedule so who knows what will be their next arc, nano etc
Ooof, took me a while to realise that's Max
Yeah it’s max, but don’t tell anyone
🤫
I'm not convinced there's a suitable screen for a 351p XX
that's true, the only modern 3:2 displays seem to be on much larger devices like laptops than small stuff
comes down to whether the display ayaneo is using in the micro (and the bottom screen in the flip DS) is available in anbernic quantities and how much it costs I think
Might pass on the Odin mini and wait for this cube 🤔
next up: odin box pro with 1440x1440 resolution
that things gonna sell worse then loki
that's amazing
max zhou after releasing a dmg style rg cube
of course not because zpg is doing one
Max Zhou after buying pants that magically turn into shorts when danced in
MAX
It has been a week since the 35xxSP dropped. Time for some videos of the 406 cube.
I just want to know the actually offered colourways
that + ergonomics reviews are really all that matters since we already know the chip performance and 720x720 screen stuff
Anbernic must be taking a week long break. Is there a Chinese holiday going on? 😅
Hopefully it's more than black and transparent blue this round.
Weird question I know but how well would switch emulation scale to this square screen?
You need to inject tallscreen scaling hax
Wouldn’t you just get huge black bars on the top and bottom?
I mean yes
Well, you’ll get a really tiny game that’s really only 405p, but at least that means you can lower the resolution to 0.5x since 360p isn’t much different.
So you could end up playing more switch games than you would on the RG556 simply because you’re by default gonna want to play them at a lower resolution to begin with.
plus some switch games support tate mode
who needs a cube?
I've always dreamt of an RGB30 with bottom firing speakers, left stick up top and start and select at the bottom. 
Did he mix the green and black teas?
imagine being a bottom
dpad-top people on suicide watch again lol
The chinese people hate us, truly.
inline shoulders, pocket-friendly analogs, good button separation, multiple color schemes.... hmmm..
What’s the point of picking the fake RGB30 over the real one?
It’s not like the real one is expensive.
holy fucking based
Ngl, I have enough fondness for the Neo Geo Pocket Color’s vibe that an analog on top 1:1 handheld doesn’t bother me nearly as much as it would with most other aspect ratios.
3DS has analog on top 😏
3DS has a compromise on top
It’s fine, it certainly helps the form factor, but… not my preference in the end
there are a lot of people here that only plan on ever using the dpad, so when a non-dpad-centric handheld comes it, its the main complaint point
I’m usually on that team
I like dpads for lower end handhelds that can't do gamecube/ps2 and up
even n64/ps1 I prefer analog tho 🙂
Even when I plan on using both, the analog stick feels more comfortable for me to use in the lower position than a dpad would in the lower position.
Sticks on bottom are very easy to use by rule, d-pads rarely so.
KT-R1 was revolutionary for this 😔
The 3DS in particular is terrible on that regard.
Bring back the Neo Geo Pocket/Color clicky stick
What the hell is this?
Return the king to us
r40s
It’s a cube
It’s a Cube but slightly wrong. The Polyhedron, if you will.
Somehow cheaper than the RBG30 
Still waiting on a 4 joystick handheld
Yeah but they’re gonna put the wrong stick on top
Your input added a lot. Thanks
Wow, great explanation! Thanks 👍
Who says they're even gonna be on the same side?
Back sticks
Bring back the back touchpad
I wish it wasn't so weird
NGPC stick is closer to a dpad than it is to an analog 😠
Always kinda wanted one just to try it
I die a little inside when I see russ using a bottom stick to play arcade on a dpad top device.
It is in terms of output and tactility, but in terms of ease of rolling directions, these tiny joycon style sticks are a fairly decent substitute.
If we can’t have the actual microswitch kind, I’d at least like to see one of these with a joycon stick and a really good linear haptics motor to fake the clicks as you spin.
Probably easier just to do the real microswitches at that point but idk
An analog with toggleable fake haptics would be sweet since then you could use it as either a digital or analog input depending on what you’re playing
I’d actually like that a lot
An A/D switch that makes it either give digital outputs with haptics or analog outputs without so there’s no way for the software and the haptics to not agree on where the lines are
That switchable stick + 6 face buttons would be amazing for arcade and n64
100%
I'm hoping Retroid swoops in and saves me, personally
if it ain't oled, I don't need it.
I'm here for my daily Hopium
I’m buying the shit out of it
...Huh?
max zhou shows you how to remove the cap
cmon #1238123357510172803 take the hint
I like how he fiddles for a good while trying to put it back, and then be like "voila, simple as that"
Also let's bully Max's manicure now
Considering he does the whole thing with his left hand, and only the nails on his right hand are trimmed, I'd say our man Max is a hardcore southpaw
https://www.youtube.com/watch?v=DqH_GMFHqf4
OFFICIAL PROMO VIDEO
Color: Beige White/Radiant Purple/Gray
Screen: 3.95-inch IPS screen, OCA full lamination, multi-touch, resolution: 720720
CPU: "Unisoc T820 processor, 6nm EUV 5G SOC chip
8 cores 1[email protected]+3[email protected]+4[email protected]"
GPU: Quad Core Mali-G57 850MHz
RAM: 8GB LPDDR4X
Storage: 128G UFS2.2
System: Android 13
WIFI/Bluetooth: 2...
8g
Wow they fit quite a big battery for this size
Wish they did the lilac or black models they teased. Ah well 😦
hm... gotta say I'm not convinced by any of the colorways... :/
I mean, they are doing the lilac one, just changed the buttons to white
I preferred the other buttons, hopefully we can buy them at some point
lilac buttons on a white shell would look better, imo
Yeah white with lilac would also be great
Huh, I actually like the white buttons better, kinda reminds of the GBA Indigo colourway
how? this render makes it appear almost pink
Also gotta say, this seems really comfy
I meant the contrast, but of course it's not perfect
Yeah render looks pink
Beggars can't be choosers, until they actually start making the proper indigo colourway
I have the ARC, I have the RGB30... this looks like it could make the two redundant for me... well, I mostly game on my Odin2 now eitherway... so I don't know if getting this would make much sense
this one reminds me of that one ayaneo colorway, here being just a chonk
Curious to see what games they will showcase on it
Missi g the woodgrain
seeing these sticks have removable tops, are they retroid sticks?
They don’t.
the ayaneo sticks were not the same as retroid
anbernic and ayaneo use similar sticks, on the pocket air you got different caps
included
20 games tested on the #AYANEO Pocket AIR (6GB). Timestamps below 👇
00:00 Super Mario World (Super Nintendo)
00:21 Pokemon Blue (Nintendo Game Boy)
00:40 Call of Duty Mobile (Android)
01:53 Mario Tennis (Nintendo 64)
02:41 Valkyrie Profile Lenneth (PSP)
04:25 Ys SEVEN (PSP)
05:23 Tales of the Abyss (Nintendo 3DS)
06:58 Luigi’s Mans...
it looks better like this, glad anbernic did the same
wow no black or any remotely dark color, on to the next it is
Accept the light in your life

Let’s go! Price yet?
Under $1000
$999 confirmed
Early bird price ofc
It’s 999 yuan so you weren’t that far off
127,22 Euro 🤔
yeah... counting in shipping...
Man I can't get over the dpad placement on this even though I'm sure it rests in a totally fine spot for your hands
It just makes it look weird and unsymmetrical lol
waiting on some real life photos...

Yeah, the colors kinda suck, I'd be stuck with the borrowed Famicom
$200 CAD? Might wait for a sale and def only if it gets good reviews
im glad im not emotionally tied to handheld colors lol
Even if they didn't keep the buttons, I'm super stoked to see they kept the metallic lavender
Same, that color is great
Welp, time to move this to Upcoming 
