#Anbernic RG35XX SP
1 messages · Page 3 of 1
The battery on the Plus and H is incredible. Honestly incredible. If that's the trade-off for thickness, I can understand it 🙂
Yeah, there's nothing wrong with device being relatively thick, but you might have expected them to opt for a slightly thinner base to maintain the pcoketability since the flipp factor adds to the thickness too.
Still better to err on the side of a bit too thick than chasing a slimmer design and tanking the battery life
I agree, but thickness has been brought up a few times. Yeah... a really power-efficient sleep feature is what I'm more interested in, but the popular vote seems to be on thickness so far
I mostly switch my devices off completely unless I know it is just a relatively quick break so that's not a huge issue for me, my main things are that it is a full-featured XX device and thus includes bt/wifi too and in a rather shallow fashion I want some quality colour schemes for it too.
Oh wait! Good point! Wifi + BT is a deal breaker for me too 🙂
Are you on MuOS? Does it have rapid on / off like MM+ (with Onion, of course)?
Running the last pre-knulli batocera on my H at the moment, but muos is definitely a fast one to boot
Yeah it looks almost as bulky as the Retroid Flip without the triggers which itself was on the edge of being pocketable.
We will see when it comes to review time I suppose
From the video, it looks about as thick as the bottom end of a 35xx+ and then you have the screen half, so while it'd be thicker than a vertical, it might be more pocket-friendly even with the extra thickness as the shoulders would be less likely to get caught than the shoulder shelf you get in most verticals
Thanks for the primer! I am very much a noob when it comes to shaders (especially the interpolation ones rather than lcd grid or crt effect ones) - I’ll give pixel-aa a go!
Let me know if you have any feedback or feature requests! It's already a little bit heavier than the simple pixellate, so adding more features would not be too bad.
You can change the sharpness in the shader parameters.
More sharpness -> more shimmering.
Less sharpness -> less shimmering.
It's impossible to make both perfect, so the default parameter (150%) is a balance between the two.
At sharpness = 1.00, you should get absolutely no shimmering, similar to the "sharp shimmerless" shader.
Even if it’s not super pocket friendly, it’s still great for just tossing straight in a bag without a case
And also no added bulk from a case
I don’t see how this isn’t pocket friendly
You ever have a super loaded wallet with a lotta bills in it, it's prob like that
square-ish shape makes it perfect for shirt pockets
thats where I carry a rg280v
might be a bit thick for 2006 era white skinny jeans
Yeah I was thinking skinny or typical women’s jeans it would be an issue, but we never think of those when considering pocketability
Cause then you’d have to be a credit card
I mean it's likely to be around 22-26mm thick, compared to the MM+ at like 20 and most horizontals at like 16-18
so it all depends how comfortable you are with a slightly chonky square
vs a thinner candybar with no built in cover
I think a fair debate could be had between the 28xx and the 35xxSP over what is more pocketable. The 28xx will definitely be smaller but if you want an enclosed device you want an enclosed device (which for me I'd definitely want if it was getting thrown in a bag/pocket that had other shit in it, but I'm fine pocketing my MM+ etc as long as there's nothing else in the same pocket as is)
And I’d definitely feel more comfortable with pocketing an sp handheld
It’s built in protection
yeah
if I wind up with both I'm very curious what I wind up using more between the 28xx (smaller, better ergo, membrane controls) vs the 35xxSP (bigger screen, clamshell, dome switches, hopefully wifi?)
Even being a few mm thicker than an SP I don't see it being an issue, SP fits in my back pocket pretty without feeling tight
This might be the only retro HH I buy on launch, the video of the hinge and no analog sticks sealed it for me
This would be a must have lol
it's all depending on that price
40-60$ is a winning price all day tbh
heck im almost in if it costs as much as the OG gba sp did (100)
Anything under 75 is instabuy imo
I think this will be 85 dollars.
If I had to guess 65-70 at launch
I’d pay that price if they remove the logo on the upper part of the shell ;))
I say more than something like the 35xx plus or H
The plus is 64 usd plus shipping full price, there will probably be a small premium for clamshell (if this has wifi) so I’m expecting 70-75 plus shipping so 82-87 for most people since they seem to charge 12 usd shipping to NA
70 something with launch "discount"
clams are hard to make correct ask Retroid or nintendo
Has it been confirmed to have wifi yet?
I think you probably will have to really be into clams to pay 80-something usd for this day 1 given you aren’t far off from like rp2s price at that point and this is an h700.
I don't think so. Not having wifi would be dumb
Maybe we’ll get lucky and it’ll match the plus price without a clamshell tax
Or at least match the ‘H’ model in price, just trading the sticks for a hinge
Agreed, but most people tend to sleep on the 2S for whatever reason so I can see Anbernic doing it anyway
this still a clam shell correct?
the last video the logo appeared to be toned down a bit
people sleep on it cuz they like to vomit about android
meanwhile android is taking over the upper mid to high end market
I personally think the 2s just messed up with the screen size
Too big footprint for a 3.5 inch screen
Luckily there’s incredible nostalgia for specifically sp clam
To this day blown away powkiddy didn’t just up the chip of the v90 at some point
It’s the chin.
bad answer tbh, the "chin" is 1/2 cm taller lol
than the rg35 h
if it had been a 4" screen without that chin (basically a dpad top plastic 405m with retroid's controls) I would've bought one day one
Huh. I don't get that either, something like the 35XX H doesn't look comfortable.
I think most people who would find a bigger device more comfortable expect a bigger screen to go with it
Helps that it gives room for front firing speakers as well.
I also think the 2S is in a slightly awkward spot where it's small enough footprint to be pocketable but the sticks and triggers protrude enough that I wouldn't pocket it.
I mean if it they gave it a 4" screen it would still have that room
just no chin under the screen and be a bit wider
rg35xx-h is 14.5cm x 6.9cm x 1.6cm
rp2s is 15.5 x 8cm x 2.8 cm
according to amazon
so basically 1cm in all dimensions
physically, that chin is like 1/2 cm taller than the rg35 h bottom lol
That chin is what ruins it for me. 🤢
for me it's the non-recessed sticks and protruding triggers when all my other 3.5" screen devices are pocketable
Agree with those thoughts as well.
I'm not the biggest fan of inline but if you're claiming it's a pocketable device...make them inline.

Still hoping someone uses the retroid sliders in a pocket device. Those with inline. 4 in screen. I'm all in.
I'd never need to look at a pocket device again
those ayn/retroid new sticks are so much better than switch sticks but they like to pop off when they hook on anything so they shouldn't be used on pocket sized stuff
they could like, glue them down tbh
Not on a shell there they need to come off to open it. 😬
99% sure that wont be an issue
The chin gives it a unique charm i think
Helps it stand out atleast
Oh no. 😬😅
Wild how this turned into a debate
That so many are absolutely WRONG ON, rp2s design slapppppsssss
Agreed. 2-0
also voting rp2s design is fuego 🔥
if the rp2s had further recessed sticks and inline shoulders I'd be down
I just figure if a device is going in my sling bag rather than my pocket that device should have a larger screen
rather than the same size and res as my MM+
u clearly didnt see my pic where its THE SAME lol
ill give you the triggers tho
I'll probably buy this, but I don't buy any handheld on launch
Especially something with a hinge
Going to take a few months to get good custom firmware anyways and I can watch all the reviews and make sure nothing's wrong
the 28xx dpad slaps
and out of the box on stock firmware it plays dolphin blue for atomiswave
If the 28xx is any indication you’ll only have to wait a few days for cfw
yeah I ordered my 28xx the day after it launched, it just arrived tonight, and I already could do the alpha build of knulli or minUI
I'm debating between sticking with stock for a bit while waiting on muOS because I've always wanted to try that out or slapping minUI on it
I think I care about arcade too much to go minUI
That was my main, and only gripe with it when I had mine, not very pocketable with the sticks and just big enough that it felt like the screen was too small.
Oh man! Going to have to buy all of them 😂
Could do without the DMG reverence on this one, I think.
That silver looks just like my reshelled AGS-101 😍
Not even a model with tribal tattoos, skipping this device entirely
Looks close to release!
I just bought an rg 35xxh so I'm probably gonna need to wait until the next sale for this one.
Is the next sale 11/11?
silver is my pick as well
Kinda want a transparent, but anbernic PCBs are so boring looking, that I find the transparent models lacking
i wonder about the texture of the plastic
the transparent ones might be like the rg556, since it's the same colors, i suppose dmg will be normal textured plastic, and the silver one might be painted smoother texture like the rg503 was
Looks like we can expect a video announcement soon from that screenshot
That’s clearly from one of their videos with the renders
hopefully announcement vid this week and reviews by next week
definitely seemed to speed up last week
I need the blue
Reminiscent of Nintendo's old "cobalt blue"s, frickn crispy
Not impressed with those colours tbh
i think they're the best colorways they've released for a device lately
although the dmg looks stupid
An SP design didn't need another dmg colourway and meh to half of them being transparents
Silver might be good in a proper pic
my choice would be a solid red, but i'm fine with the silver, that's a great one too
Agreed woulda been nice to see a flame red or like a green of some sort
Dmg should have been replaced with an actual sp colourway, a proper cobalt blue and drop the transparent blue for something else
I like the DMG model, I do gravitate to the weird stuff though.
normally I like dmg too, but if you are going to do a homage to the gba sp it is unnecessary for that one
a famicom or nes solorway would have been a better fit if you wanna go for a retro style
no indigo is a bit of a sin too ngl
to be fair, wasn't indigo only on the og gba
I agree, sticking to GBA SP colours would have been nice. I don’t want transparent and I don’t like silver so it leaves one left.
For this, I'd have gone one transparent, silver, black (or perhaps graphite) and then something bolder like cobalt blue, red or green
No transparent, just all solid colours. Silver, black, green, blue, yellow.
I think they are trying to look different to the V90 so that’s why the colours are different.
while I don't like them, there's presumably enough of an audience for transparent that they feel the need to include one per device
It’s weaker plastic than solid, I wouldn’t get it for a flip device. Those hinges you want the strongest plastic available.
i think most people buy transparent if it's available
doubtful, but definitely an audience for it
i wouldn't mind a metal model if it was an extra 30 bucks even, but i guess that won't happen
I'd suspect that anbernic might be done with metal, it probably doesn't add enough extra sales to make it worth their time
Metal sucks, too cold then too warm, too heavy, too many scratches. I’ve owned a few and I’ll never get another.
while their tendency is to keep stuff in the store in the hope it goes in sales, it is a lot easier to take that hit without the fixed cost of the shell
yeah that's fair, the last metal one was the rg nano, right?
think so and then it probably makes more sense, but even so probably pushed the costs up like $20
The silver one almost looks metal there you go, compromise lol
Think I'll get the silver one tbh, looks pretty good in that video
thats a thing with anbernic, they usually do such good plastics they don't need the extra cost and weight anyway
yeah, little bummed about the clear plastic options for the SP though
feels weird on an SP
I'd take away the DMG color and replace that with something a bit more aesthetic
Maybe Orange
What 2000s era camera they using
Maybe it's from a webpage/storefront page that's not exposed to the public yet
And we only have a thumbnail for now
But it's sign that a bigger pic will come soon
In any case. Blue and grey clear winners. Silver next. Dmg dead last by a mile
for me silver > blue > black > dmg
Think I'll wait for better pics, but thinking silver > dmg > transparents is my ranking of them
I love gameboys but Dmg for this feels so dumb lol
i think dmg with all grey/black buttons would look decent
Even nes controller way would be better
but i bet with the amount of 35xx they've been selling in dmg color they felt they had to make one
Ala
They don't tend to do dmg on every device though, it seems to follow a pattern of at least one one dmg/white/black
they should add snes colours into that core, the grey with skittles would be another good default option
I kinda find it sad we won't really see any more nintendo handhelds in the future
This stuff is so cool
Switch is handheld I guess, but it's not what I mean
Switch is a Nintendo handheld tbf, but I get what you mean
I can see them doing a limited game and watch/nes classic esque gameboy release one day, but a dedicated handheld I don’t think so
it doesn't make sense with how much development costs unless people were fine for paying for pixel games from nintendo again
I wonder if we will ever see some handheld equivalents to the new/snes mini consoles
Utterly pointless with retro handhelds but would inevitably be a scalper's delight
It barely worked for Home consoles
just get an fpgbc lol
Besides of the NES and SNES all the other oens weren't really a hit.
I definitely bought them for the look over the functionality
And with handheld consoles, the problem is that they are already cute.
think the sega ones did quite well, they even did a megadrive 2 model after all
Maybe they could make a RG Nano sized Gameboy
some definitely sank like a stone, didn't the psx one get heavily reduced and still didn't sell?
Think they'd probably not even bother shrinking a handheld one, just release a gba sp loaded with games or if they were actually putting in some effort, loaded with games and with the ability to run stuff from nso
Without shrinking there's just no difference between it and the knock off handhelds that are already being made
i would never buy something like that so i can't really comment, but i feel the nes mini was the coolest one
I don't think even the SNES really had the brand power to get away with getting sold as a mini console. I wonder what the numbers are for NES mini versus SNES mini
Tbf, most normal people likely still wouldn’t get a retro handheld or consider it as an option
well, they just don't know about it
This is still a pretty niche hobby
couple friends i showed my collection were quickly interested
Many people would buy a handheld console but they just don't know it yet
They also wouldn’t want to touch cfw + Roms. Tbf a lot come with Roms, but the experience overall would be meh
i mean it will never be mainstream
Also it really needs someone in your life to be curating the roms and the CFW
I have definitely sold people on retro handhelds after talking about mine
but seeing that stuff like the miyoo mini and rg35xx sell over 30k each only on aliexpress, i don't think it's that niche
30k in gaming is niche yes
sadly, one guy is a cheapskate on random stuff and bought his kids an r36s
cause you can't just really tell people to go buy a MM+, even the MM+ needs a lot of setup compared to a Switch
His argument was that they might not like it or might break, so why not get something he'd be happy to take off their hands
or it might arrive nonfunctional 
I think cheapest I’d get my kid now would be a 28xx now that I think about it lol
Or a + handheld
Think I'd go either plus or an H
although the 28xx does feel like a sturdy little thing outside of the shoulder button rattle
lol I stray away from deals. Some amazing prices but I’ve given my close circle all a handheld at this point lol
only handheld I would happily move on atm would be my rp3+
I try not to live in excess anymore. Those can go to people that actually play them, or to other hobbies
Have to post my 280m now that I am happy with the 28xx lol
i'll probably gift out my xxh and eventually this mm+ i bought
while it is somewhat hoarding, I don't mind having a bunch of the smaller, cheaper handhelds, it is the dearer stuff I will be strict on, so didn't go near 556 or rp4p as they offered nothing when I have an odin 2
yeah i don't bother with anything over 80 bucks and it's usually stuff around 50 that i buy
i did pay 80 for the rgb20sx because i want to get rid of my rgb30
think I am sticking with my rgb30 until somebody else does a better version
i mostly used mine for gbc so it makes more sense as a vertical
and the supposed better build quality of these, although i feel i messed up by buying a solid color one
Currently I have
Deck oled
556
28xx
Soon to sell 280m
Technically I could get rid of the 556, but I enjoy the deck for old pc the most, and the 556 I emulate more on
I'm going to plead the 5th on my list. 😄
lol.
Dang it. Why do they have to post more pictures the day after I order a28xx?
RP3+
Odin 2
MM+
28xx on the way
in my defense, the RP3+ is in storage since the odin 2 replaced it
Do we know the resolution of this thing? I hope it's favourable to GBA integer scaling
640x480p
I think that'd give a decent 3X with some letterboxing
It's the same as the mm+ right?
yeah
The video the other day shows it looking real nice with the overlay
480p 4:3 kinda sucks for gba but i'm fine with it since i use lcd shaders
Anbernic has that 3.5 inch 480p supply chain ready, can't bother getting anything else
But imagine how great it would be with 720x480 screen
if they could just find them
Is there even a handheld that uses that resolution
Wonder how different platforms scale to that
gba and every 4:3 with pillarboxing should do well
tbh pillarboxing kinda sucks when it can be avoided
it is what it is
you can have a perfect gba screen, a perfect 4:3 screen or a perfect 16:9 screen
but not all of them at once
Main downside to me would be larger pillarboxing for OG gameboy games on this device
too bad nintendo chose such different aspect ratios for gameboy and gba
well, 4:3 is a middle point between 10:9 from the gb/gbc and 3:2 in the gba
so it would fit both if you need them
you can't have good gba and good gbc at the same time
960x720 would be the dream. 4:3 and integer scales GBC and gba
i kinda dig the dmg one
i'm getting silver
jeez i gotta stop getting drawn by every single device released
although the aggressive aliexpress sales didn't help either
I may pass on this one since I got a 28xx. I want a clamshell but I kinda want a widescreen one because of ergo and because it’s the only way to get a really pocketable widescreen
Flip 2, x18s successor, maybe anbernic will make a 556flip?
Yeah, this is me currently. I'd planned to buy one of these, then got the 28xx and am now unsure on if I need this
i don't really want a widescreen clamshell, lack of good sticks and ergo for more modern games would ruin the experience for me
i just want one of these, nice and simple
I might buy it and sell the one I find myself liking less
i'll probably sell a few of what i have at cost in a couple months once i've tested everything and see what i like better and worse
I just want one slider, the widescreen is for gba and psp
I'm sure this has been in development a long time now, but imagine this with the 2.8 screen from the 28xx, could actually go smaller than the gba sp perhaps
slider would be okay
flip smart pro would be cool
and a nice way to get rid of the shitty ps vita sticks
although i think i like 4" 4:3 for small gba than 5" 16:9 since i use shaders
That would give you OG MM ergo which would be bad for action games but could be great for one hand rpg playing
man, that blue looks awesome... the handheld i didnt know i needed till today
Basically a funkey pro
nothing wrong with that lol
i still have a case for an og sp that could fit this too potentially
Tbh I want them to murder the pixel with a 28xxVM
yeah ergo starts taking a hit, but I'd be viewing it as more a bigger funkey s
One big advantage of small verticals is one hand play and the 3.5” verts are just a bit too wide for that to be comfy. The OG MM size is perfect for that but the handheld is fragile, everything else in that size category is horizontal, ancient, or severely compromised
honestly just give me a pixel v2 with a higher res screen
Yeah, that would also work as long as it got open source firmware and a better chip (3326?)
og mm with a slight redesign to move the triggers to the top of the device would also be perfect
But yeah an rpg machine for me needs to be able to do good fast forward on psx and gba
I'm a simple man with simple needs 😆 but honestly I do want a good niche 3rd handheld. like the rg arc but with a stick and actually good for saturn/n64
I also have a 3ds and dsi which I didn't count because they're OEM hardware
Yeah no one counts oems
Also
I get wanting fast forward for rpgs, but I can’t do it
Feels weird, kind of ruins the vibe of an rpg for me
I played one too many ps1 rpgs without fast forward lol
I just don't got that kind of time
i use it minimally, although some games like trails have a built in fast forward that's pretty great, cause then you don't get fast forwarded music and all that which is what ruins the vibe for me
for pokemon i only fast forward when i really need to grind
yeah I have no problem fast fowarding pokemon too
Yes fast forward music is putrid
Idk I just don’t feel rewarded when I fast forward
Something about it changes the whole thing for me
Reposting so more people see without scrolling forever
we could have a mod pin it
So who has a sticker cutter to make skins for this thing?
Evo
@dbrand ?
u here? 
@fast quest you interested in making that woodgrain skin for this too?
I'd like to see something a bit more official first. anbernic posting a higher res pic of that would be nice
powkiddy can make some bear stickers
Personally if I were choosing the colorways I would have gone for something like the following.
Transparent white
Transparent Black
Transparent Blue
Solid White
Solid Black
Solid Blue
SolidRed
Solid Green
Solid Purple
But that may be too many colors for Anbernic, even so I think more options on something like this would ahve been appreciated by customers and could ahve helped to make this thing more attractive after so many devices with the same chipset were released in the last few months, keeps things fresh and gives buyers options.
Too many colors really and I think the color selection is good
Want silver with black buttons, but if they won't sell them to me I might have to go transparent black or dmg
Solid red or purple would have been great instead of the dmg one but it's fine
Silver and black buttons gets your basically there for the uh.... NES version
Just would have to get red action buttons which I'm sure 3rd party will sell like Sakura
hopefully this will have no big issues at launch and will pop off
Same
that way it'll get plenty of fan support and third party mods
anything new on this. I read like 10 comments about a rp2s and just jumped to the bottom of the chat.
yeah, #1169059294919012494 message
that seems to be off the typical anbernic first look video, so it's probably only a couple weeks to a month away from being out
If I can get my hands on one I will most likely yes!
Oh yeah
I’ve tried to contact Anbernic many times to see if I can get review units but never got a reply so it all depends on my finances really, baby arriving in a month so might be tight
Either I need to fix my monitor or that photo is blurry as hell.
Blurry but good enough to know the color ways
i want a gray with skittle buttons
Blue with skittles for me
silver or black for me
everything is better with skittles ||that fucking rainbow is delicious||
It's just more fun, and for me growing up with the N64 I'm used to having those multi colored buttons
I gotta say anbernic if this comes soon they’re doing it right with all these back to back releases. I wonder how it affects sales though 🤣
i also prefer no sticks for this
well i've bought the 35xx+, the h, the 28xx and will buy this when it's out, so pretty good for me at least lmao
nearly confirmed to be the rg35xx+ chip
One os to rule them all. MuOS 🤣
At least til Garlic is completed
It probably doesn't help a specific device, but you'd have to think that it helps them overall, somebody checking out a new one spotting a different model they like better an ordering that instead, sort of like each new device is advertising for the range as well as being a product in its own right
it certainly helps them from a firmware perspective since they only really have to modify for the new screen and a few other things
Yeah I’ve also noticed that as a seller, variety makes it better for buyers. They’re usually more interested and tend to buy when there are more choices to pick.
One thing they could seriously do with improving on the firmware is ota updates and then they wouldn't have to keep scrabbling around for a suitable storage solution every few firmware updates
The dmg is interesting. I think I’ll get black tho lol
i think they could swap the dmg out for a dif color like red or purple tbh
Red would’ve been so good
I'm going silver
Or matte black
I would've really liked a solid black
That makes TOO much sense though
i think there might be money to be made on stickers/skins for this thing tbh
For anbernic
im just hoping that this one doesnt skimp on the bluetooth and wifi
I would've wanted rg505 yellow
I am expecting it to be similar to a plus/H but clamshell
Anything more or less than that is just weird
the good news is they are giving us a white, so we "can" dye the shells if we wanna
silver should take dyes even better
people dye platinum gamecube controllers religiously
That looks awesome but too shiny for me. I do want more matte/acrylic colors
yea matte is the way to go
i like the idea of the transparent colors but it really depends on how good the plastic is and that light on the lid
if that logo is too glaring then hard pass
if the plastic is not strong enough and is prone to cracking, same
Metallic Red GBA SP ❤️
Ooo or a sapphire
I think anbernics clear shells on the H have been pretty good
Mine haven’t cracked, yet lol
or transparent red 😏
think the regular flame red sp looks better
One other thing that sorta concerns me is how the buttons/pad look in that vid, they don't seem to be the usual soft rubber membrane Anbernic is known for
the groudon one is good too
SP used domes, this probably does too
Right and it's not that domes are inherently bad, it's just that this'll be the first (i believe?) device from Anber to have them, so first time tries bring undetermined quality
Domes are much harder to fuck up than membranes
From my experience with dome dpads, there’s probably a lesser margin of error
in my experience, its a lot harder tor domes to be bad
Just ask miyoo 
But I do hate that it can get super clicky
Yah, not the biggest fan either
domes def arent as satisfying to pres tho
It also looks like the same triggers as the 28xx. Also overly clicky
the sp had clicky triggers
Clicky triggers are give or take, nbd. Face button clicks get tiring very fast, especially for nighttime gaming
Not when the triggers are like dog training clicker loud lol (28xx)
With the way things are going 😬
I will give anbernic a lot of grace on this one. I also expect a lot of people to figure ways around the hardware eventually too. For this model specifically lol
Oh I meant the miyoo
Yeah dome dpads definitely not as satisfying
I think people are just really happy to get a clamshell
but hey you'll never get accidental diagonals
def a soft clicky, im clicking my rp2s and my gba sp and the sp is way softer
Miyoo has a lot of trust to win back, it's their game to lose. Anbernic is on a hot streak I doubt they even look at Miyoo as a competitor anymore
Guess the RG35xx 2024 was just forgotton eh
the who
i mean, it was pointless
don't really count a good streak as one handheld release lmao
well yeah but anbernic did do that dumb release not too long ago lol
It was dumb, not bad tbf
I have one.. yup
The A30 has one thing going for it
There's no comparison to the 28xx
Well miyoo is still a competitor seeing that people are still comparing and buying everything to the mm+
But still that's about it lol
The buttons aren't better, just bigger, d-pad is atrocious
A30 aside lol
Yea
Yeah the best miyoo competitor to the 28xx is the MM+ lol
It's the only thing I really wished on the 28xx
Or the mm v4
The bigger buttons and would have been nice with wifi
the a30 design is pretty mid tbh, the anbernic one is more particular
Otherwise don't care about the rest
both will be done and dusted by the XuMini I’m afraid
It competes in the vertical dmg department but that's not a huge portion of the market tbh
Nah it competes in the “this pops up on my social media feed first, I think it’s neat so ima buy” market
miyoo had some good design choice with their other devices, but the a30 in particular is not great really
I actually like the design of the A30 outside of the analog stick lol
Apparently miyoo support mentioned the flip has a 3566 chip, could be the push it needs to fight with the 35xxsp
wouldn't it be the strongest 2.8 in device if all goes well
yea it’s a 3562
Honestly as long as it does GB/GBC/GBA I'd be happy
Cause that's really all I'd want out of a device in this form factor
unless they missed the mark with cfw 🤣 they said it’ll be using their modified amberelec system but amberelec itself doesn’t support 3566 so they have a lot of work to do.
so a V90
Yes, but not made by baboons
probably thats where those "batocera bits" come into play
Lolwat
wtf people are sleeping here almost burst out laughing with the baboons stuff 🤣🤣🤣
I wanted the light up logo….
bits they won’t contribute back 🤣
ofc they wont
I hope its similar enough that 3566 software doesnt take long to adapt
No Woodgrain for me to pretend it's a block of wood with usb ports? No buy!
"Hey boogerboy why do you have a wooden cube connected to the TV?"
"Funny"
dome discourse
I personally love domes
I dont like when buttons have play
and clicky makes everything better
whens this puppy getting announced/released
I have mouseclick face buttons in my gamecube controller for a reason
Yikers
We got measurements? 👀
Honestly it's kind of blocky and ugly but I still need it
is that a full hdmi port?
No, why would it be
looked big in the drawing iunno
Wait, the patent was filed in with Nintendo logo's hole? 
its china, they do NOT care lol
just having 4 buttons is enough of a difference in china
I doubt nintendo has a design patent on a logo hole
and the patent office isn't there to police potential trademark disputes
Feel like they coulda shaved a mm or two off that lower half thickness.
I just find funny they left it there when they're not even using it
i didnt see it on the preview device the other day actually, not everything in the patent has to be on the final release, but everything on the patent needs to be in the final release as far as im aware
the 28xx shoulder buttons make a lot more sense now
honestly they work fine on the 28xx as long as you use the meat of your finger for L and R instead of trying to use your fingertips (where you can miss and hit the shell they're flush with)
I do remap so that both L1 and L2 work for L etc on systems that don't use both
Right but I’m saying the design looked out of place on the 28xx, especially considering they usually go with their standard square inline ones, but after seeing the CAD drawings, they look identical to the sp ones
It's gotta have Bluetooth support since it has a mini HDMI port. Right?
Wifi?
The 28xx has hdmi and no BT
Isn’t that just saying the same thing twice?
yes and no
a better way to spell it out is
different by omission is fine
different by inclusion isnt
I think you're missing a 'not' there
in your original message
but anyway if it's a design patent they don't care if you slap a logo on it later or not, that would be covered under trademark not patents
i can only hope for wifi
not having that would definitely be disappointing
For once I'm not really digging any of Anbernic's colorway options. I was really hoping for Flame Red or Cobalt Blue like the original GBA SP, or a Classic NES one would have been equally nice. I suppose the silver one with gray buttons is the closest to an actual GBA SP color, all it needs is a tribal tattoo on top XD
yeah silver is the best colourway despite being boring AF, sad times
Yep, silver it is for me. Assuming there are no major deal breakers with the device when reviews start coming in at least.
I already have an RG35XX Plus that I play the heck out of and just bought an RG35XX H this afternoon since it was on sale for $46 so I really don't need an SP at all, but I'll be darned if I don't want one. Badly lol
I already have a 28xx so this would definitely need wifi and 10/10 reviews to justify that overlap
the 28xx is not a clam but it is very pocketable
In my case it probably doesn't help that the GBA SP was my main gaming device that I spent hundreds of hours playing as a teenager, so I have a ton of nostalgia for the form factor that makes me want it even though I don't need it.
I feel like if they can hit a price point of $75 or less for this one it'll be an instant buy regardless. I assume it's gonna cost a bit more than the RG35XX Plus and H just on account of the extra engineering that went into the clamshell design.
I wouldn't be suprised if it matches the H in price
it has a hinge but no sticks, and the engineering costs are a fixed expense you want to make up on volume
Honestly if this thing is a success it’s probably going to be a big success for Anbernic, everyone seemingly loves the SP and it’s the kind of thing which could attract a lot of random people who see it on TikTok, aliexpress or Amazon. “It looks just like the gameboy I had as a lad and plays all the games!” So I wouldn’t be surprised if we see aftermarket shells and the like made available soon by the community to change colors for these.
I feel like the V90 had a chance of doing that, but the retro hobby was still a bit too niche and the V90 does have some flaws out of the box so didn’t capture the crowd it could have, but even so it’s still really popular and has tons of support
Shells? Doubt but I defo could see the typical buttons/decals though
Kinda wish the black was solid.... Kinda....
Honestly a solid black would be my go to if it was an option
Hate the lack of solid colors in this price tier, the RGB30 was very refreshing in that regard.
And when you get them they tend to get hoarded by DMG, SFC, SNES.
Prudis posted in upcoming chat, that blue tho 
gotta add some tribal decals on the silver one
Wish they'd done a slate or onyx or whatever it was called
me take blue
However I kinda wish they had a completely colorless shell kit
Just so we could color them into ANYTHING we like
No skittles, no buy
Colorless should be a standard option that the companies make for Dye heads
While I'm not sure if I could speak of anything in that community, there's gotta be SOMEONE who thought of using the LGBTQ community color flags to color these shells
I think that's something that usually requires a fairly decent grasp of the culture to be supportive instead of pandering, etc and probably in general would not translate well to their domestic markets
I ran the image through a dogwater free browser ai image sharpener. It may be better/ worse to look at
Worse
Just squint your eyes and back up three feet
I always think upscaling it this way is dubious because it's adding details where there is none
I can already do that with the blurry original lol
ai zoom on phone cameras do this too
Again, it's likely a leaked media asset from a webpage that's not supposed to be up yet, but mostly prepared. So that page might be up in a few days
Thats definitely gonna be in their announcement video in a week or two
Gimme
I say as I wait for my 28xx
The RGVoxel35XXSP
I just realized something delightful... I don't see any LED on the back of the silver one!
It looked so perfectly normal that I never stopped to question the fact that the strange out-of-place thing wasn't there XD
It’s there. It looks like it turns off when you close it
But you can briefly see it while it’s open
that combined with quick mode (which even exists in stock) would be a hell of a thing
I’m sure you could prob run something to keep the led off too
Same way how people have made it so the transparent 35xx H led’s don’t turn on
Lol
maxzhou88 said the illumination effect was not from any led but actually from the display's backlight. kinda economical, but right now it's removed. i wish they kept some logo on here. a tiny anbernic workmark wouldn't look too bad
Apple used to do that backlight trick, the problem is if you have sunlight coming from behind the screen the logo will shine through onto the actual display
seeing from the engineering pics, the bottom seems really close to the thickness of the 35xxh
(comparing the power button which i suppose is shared)
RG35XXSP has four colors: classic silver, gray, technological black and blue transparent.
This machine supports ported games, PSP, N64, NDS, DOS, DC, PS1, and more than 30 platform games. It is equipped with a 5GWIFI module and supports Moonlight streaming, enabling handheld gaming of 3A masterpieces, as well as WIFI online mutual entertainment ...
I'm a fan of the DMG one as well 👀
i'll still get the silver probably although it looks kinda cheap in the vid
but that's what you get with spray paint i suppose
i hate that they didn't show the back to see if there's a logo or not
Really hoping the boot up times are decent 🤞
probably an h700 chip and it will be the same as the others
Really hoping standby battery life will be fine 🤞🏻
I guess their prototypes used gba sp parts? otherwise, I want this one just for the logo
maybe it's an overlay
It is
Future goat handheld
didn't look backlit so I was fooled
This could stop me from buying new handhelds for a while. Endgame. As I said last night DMG is the colour to get.
i'm so excited about this
i just hope the launch goes well and there are no issues
Best thing? None of THIS colored but still physically indistinct lettering nonsense
I always posit that good product aesthetic design need to involve some serious considerations regarding print FONTS, and the 35XX plus dropped the ball on that
is it just me or does the thing look huge in the persons hand, could just be smaller hands?
At least with the RG353P models, EVERY letter is the same sans font that's part of the mold. Consistency.
looks to be very accurate to the real SP, which were a little chunky
Don't really care too much for the colors ,either gonna go with the DMG or silver
Membrane dpad it seems, buttons sound clicky though
I just noticed the HDMI output isn't stretching the image like other 35xx devices
that overlay though ew
Actually I think that might be th shoulders I'm hearing
Oh my. Whelp, there goes my money. One thing I am wondering is just how big the device is. In my head I was imagining it being roughly GBA SP sized, but unless those are a small child's hands holding it I think the RG35XX SP might be a fair bit larger of a device than I was expecting.
It really exists
Bluetooth and WiFi confirmed
So glad I didn't buy any handhelds during the choice sale now since I can use that money for this
I just bought an RG35XX H like 12 hours ago... and now I will be undoubtedly buying this as well XD
they've already showed it next to an og sp, it's slightly bigger
That's not too bad at all! It's just a little bit bigger, which was probably necessary to accommodate a 3.5" screen and keep the proportions looking right.
it's mostly a thicker bottom
Oh baby.
but that plus the slightly bigger area should make it more comfortable
Also there's no logo anymore for those people very concerned about it
It does look comfy! Miyoo is sure gonna have a tough time competing with this though >_<
miyoo should focus on extinguishing the fire they have going on with the a30
I've watched the video again and I really can't tell which part of the controls is making the clicking sound
True that. It needs a significantly brighter screen, a better D-pad, a bigger battery, stronger glue for the faceplate, and... you know what, maybe it's best they just let the A30 go and move on to the next one. By the time they fixed everything wrong with it they might as well have just engineered an entirely new device.
maybe, but then they'd need a perfect launch for the flip or they will have no credibility
I’m actually coming to the same conclusion. Currently in love with 28xx’s ultra portability
Here's a fun thought: Does anyone think there will be any additional entries in the H700 chipset XX series past this? I mean, they've already got the vertical RG35XX Plus, the horizontal H model, the micro sized 28XX model, and now the clamshell SP model. What's next? I wouldn't mind an XL version of the H personally, but I'm not sure where else they could go with the XX series from here.
The youtube vid claims it'll have wifi
It is equipped with a 5GWIFI module and supports Moonlight streaming, enabling handheld gaming of 3A masterpieces, as well as WIFI online mutual entertainment and other functions.
If it wasn't for the Cube I'd say a 1:1 screen. Maybe a 3:2 screen device?
A glove
Maybe! It'd essentially just be re-release of the RG351P, but with Anbernic's penchant for releasing a new handheld every month and 7 months left in the year that leaves 6 handhelds other than the Cube they'll be pumping out this year XD
I was still somehow surprised how soon they started showing this off after the 28xx
Time is money I guess 
The AliExpress Choice sale makes sense now though. Anbernic was probably trying to unload as much of their surplus stock of RG35XX Plus and H units as they could before rolling out the SP, because as soon as the sale was over the SP showed up and this is probably going to be the one everyone wants now.
The only thing off for me is the angle of the buttons for GB/GBC/GBA
But no idea how you would make it work for 2 button and 4 button controls
Don't worry, you can just get your own
So how long is it usually between showcase video and actual release?
i wonder what theyll price this at
I think the 28xx was two weeks.
okay the silver one looks stunning
and hey, judging by the thumbnail they finally got the name of crash team racing right 
also it looks kinda huge, doesn't it
barely bigger than an og sp
Omg both transparent ones are gorgeous...was dead set on blue but now that black is pleading its case
Hmmm, not showing it closed so we can't check if it still bleeds light on top, sneaky...
it's not like there won't be reviews before you can even buy it
Well yes, but there's the tiny preorder discount they've been doing.
Looking at the official price of the 35xx plus, this might come in more expensive than I thought
That's $76 after shipping (or $76 with free shipping). I'd expect this to land at $85ish then
Yeah, I don't see any reason for Anbernic to price this low 70s, demand is there and Miyoo just gave them free reign by being late.
I don’t think that’s an unfair price provided the hinge is durable enough to not break 1-3 months in
It's def a bit bigger than the original SP, which is not a bad thing -- I just got an original one this week, and it's definitely a bit small for adult hands.
I do, but I'm picky with price:performance.
Of course, they have to show off PSP god of war at 12 FPS stretched to 4:3.
Hey man, this time they learned to enable frameskip on Whacksy Taxi.
It's just funny seeing all this smooth gameplay and then stretched and stuttery GOW thrown in there
I was surprised to see a taiwanese DOS game in there, first time?
Legend of Sword and Fairy? I feel like it's in most showcases
Ah, I've been out of the loop on Anbernic showcases then.
Surprised they didn't sit on it till miyoo was ready to go with the flip, just so they could release it a week before & cannibalize their sales
I guess miyoo is doing a good enough job of that themselves
Figure being the only stickless contender lets them release it whenever they want.
You mean "Taiwan, Province of China", right? 🇨🇳
Plus it seems the borg cube is lining up soon according to Zhou, so.
They didn't want to wait another two years to release it
Might see a first impression vid from Russ this weekend if I had to guess
Russ said he got one coming?
I mean he gets everything right, especially highly anticipated stuff like this
Well looks like ambernic is getting my money, my wallet is primed
Last time it was like two weeks
Wonder if the buttons are tactile like the SP
They seem clicky
Yah I don't see a membrane zooming in on the clear units
The video was also very clicky
Ahh, I had sound off so I'll take your word lol
Yeah if you go to 0:48 of the vid when they play Gex you can hear the face button clicks. It's not crazy but its there
Dpad looks like it has nice roll to it at least
Dmg is definitely growing on me with that vid and pic, the silver one looks a little cheap too
i had the same impression after the vid
although i guess a studio light pointing into the sparkly plastic might make it look too sparkly
The blue is like almost...too blue, if that makes sense? Like it's a distracting shade idk
Ayo Bluetooth and WiFi confirmed, nice
I'm definitely leaning towards the transparent black after the video, silver looks too reflective & DMG looks too white (like it's painted instead of molded that color)
Yeah transparent black does look good
I will say when closed the fact the the top looks almost solid is nice
Yah, hard to go wrong, and I'm sure it's the same material as the 28xx, which feels & looks great in that color
HOLY SHIT
it's not just a rumor
wifi, BT

the hype is real bois
4:3
GBA had a software bezel
no onyx so I'm prob going gameboy color scheme
wait no I didn't mean onyx lol
graphite is what I mean
Transparent ones look best to me, but the top light up situation needs to be cleared up.
I'm pretty sure the screen just turns off when its closed tho
I'm thinking they ditched it from this, don't see evidence of a cutout, they could have another layer of something on top but it seems unlikely
I mean, it’s not what the stock OS does with the sensor/trigger that’s cool, it’s the fact that sensor/triggger is there for CFW to rework to begin with.
Yeah. My biggest fear is that there won't be a way to reliably detect when the lid is closed.
I'd hope so, but the video 3 days ago showed the silver one faintly bleeding light. On the other hand, the DMG had a logo cutout which seems to be gone now.
I'm guessing the engineering sample was using an old screen with the cutout on the back, but yah some confirmation would be nice
I don't think they'd ship it like that tbh, through the opaque plastic it looked pretty bad
In the video the DMG looks grey
Must be the lighting, looks grey when it's not front & center
I wouldn’t get transparent, that plastic is historically not as strong.
Good point.
Would have been nice to have a red one over the DMG in this case.
Or any traditional SP color, really.
If they do this well, with it have wifi and bt, might be a solid one
graphite or the proper dark blue (cobalt?)
I would have liked a non-transparent black at least
Graphite for me.
Where is the transparent green?
Like the death stranding dualshock, that'd be cool
Wheres the woodgrain and metallic gold
Love me some woodgrain
Yellow would have been a devious choice, wasn't one of the miyoo leaks a yellow one?
Would have been nice to match
Only miyoo flip colour i remember is the pastel proof of concept or w/e it was
People know the original SP didn't have a sensor to know when it was closed right...?
Cause I'm hearing a lot about this sensor idea like it'll be REALLY important lol
You can see the magnets in this at least
In most games you go into the menu and enter into sleep mode
These look so good
The silver is very nostalgic for me
Oh yeah that too
there was a yellow one with pikachu sticker on it too
as far as that black one, they seriously need to do all lime green buttons
Only thing i really remember about the miyoo flip is it having sticks
This picture always reminds me of the retro pixel pocket. I think there is a connection here somehow.
Way thinner body too apparently
Probably has another undersized battery
It's not about authenticity. The hand wringing is about standby and battery drain.
I've asked this before, but how's the idle and sleep power consumption on H700 devices (28xx, plus, h)?
RPP had that same color scheme when it was being teased, that's almost certainly why
Shame that device didn't really work out, would've been a nice one I think
Maybe they can try again and do the Retro Pixel Color. RPP with actually good buttons/software and gbc inspired ergonomics would be really nice
Not sure cause that also depends on a proper sleep mode but the 28xx is getting like 8 hours of ps1 playtime
Sleep mode on close is just basic at this point. I don't know how hard it is to implement but the fact that it's been standard for over a decade means we just kinda expect it.
Do we know what the battery specs are?
Yeah I care more about the sleep mode being any useful, with the automatic sleep on flip being a really nice upside
Hopefully it's thicc in the pics and video because of the big battery it has tho
Maxzhou88 uploaded this pic to bilibili
A bit wider maybe
will wait for reviews
Hopefully Russ and the RH crew get it soon
but it's staying in my radar 
(Joey will get it whenever because Anbernic hates him)
i'm curious about the buttons especially
joey will get it when gogamegeek gets it
I think the person doing the demo just has small fingers
I'm impressed with how faithful it actually is.
a gameboy sp that can play more but has no sticks... meh, I can skip that
Hope the dpad feels the same
No sticks makes this much more appealing for me
Just realized they cloned the look of the SP dpad
I see this as points for Joey being the most free.
they cloned everything

Ditto, but it means we won't have his review for a bit
Are there even any handhelds with that yet?
I mean, all the other H700 ones have had it, so I’d hope it’s the same with this one.
one of the 1st modded devices I got was the GBA SP
I rarely ever play ot it nowadays
I want it in gold 😭
yes
Yeah, enabling pd chargers is like $0.04 in 2 tiny comonents that can sit right next to the port, sad more devices don't have it
35xx+ / H support it
Yeah, literally all the other new RG##XX ones.
Interesting, first I hear of it.
the 35xx original worked with my setup, same for the miyoo mini + and my trimui smart
Assuming they didn’t also go back and remove that for the 2024 version of the non-plus.
but I've heard the former two vary from setup to setup
i wish they had kept the concept of the slanted buttons instead of the usual square, but i guess that needed custom rubber membranes/domes
The latest revisions of the Miyoo mini (and +) have it too
It depends on what your pd brick supports.
Those are still 5v2a though, right?
The slant would be nice for gb/gba but kinda silly for psx
the button layout is what actually pushed me away from the rg35xx sp
would have went miyoo flip (in a decade lmao)
So usb c pd doesn’t mean fast charging, just that it will properly slow charge on a usb C charger instead of getting nothing
I don’t think you’d want to actually fast charge any of these cheap devices with lowest bidder batteries 🔥
also the silver plastic looks better in that pic than in the video, i guess it was too much light making it too sparkly
Thank you. I feel like I'm 87 when it comes to chargers, completely lost the train on that one.
USB-C Power delivery requires a handshake to determine max voltage, if two pins have a pull down resistor on them when the handshake fails it'll deliver 5v, if the resistors are absent it won't supply any power
Basically I’m just sick of having to use usb A to C chargers and want my whole setup to run off of nice clean usb C cables that are always right side up and the same on both ends lol
jfc lmao I just realized how thick it is
top part is thinner but bottom is thicker than an SP
The OG SP is kinda chunky but this is more
yea
Hope I can hold it firmly
but i think itll be an acceptable "chunk"
seems they cloned the shoulders too
Yeah, total thickness looks only slightly more but the thinner top means the bottom is thicc
Yup, if your device has the right resistors, the charger should know what to do. Really, because stuff like the other voltages are on a different pin for precisely that safety reason, the only way someone can mess it up is if they don’t just have a shitty pd charger that ignores the resistors, but the device itself also has to be shitty enough to have the 9V and 5V pins swapped.
the shoulders are the sme ones being used in the 28xx it looks like
checking the engineering pics, i'm pretty sure the bottom is almost exactly as thick as an rg35xxh
hmm
as I said, really excited about this
same
That would require both the device and the brick actively working together to fuck up.
this may knock the V90 out of my WTB list
I had one, it was pretty good. Just let done by the OS. I wish they tried again but I don’t think they will. They should have just paid someone to make an OS for it and it would have smashed it.
only reason i even had a v90 as a buy was because it was cheap enough that if it broke i wouldnt care

dammit i thought i would have longer than a week to enjoy my 28xx before pining for a new device
I've been looking at the 28xx but I knew this was coming so haven't touched anything
My 28xx is still in transit and already forgot about it
or even the miyoo flip was like announced ages ago
tbh this and the 28xx fit two different holes in my collection
i think the tail end of this year is gonna be pretty light on cool budget handhelds so enjoy the moment
is what i'll continue telling myself to justify this purchase.
Tell me about it. I decide to buy a Plus on a whim and suddenly 1:1 becomes a market and this looks good.
Honestly, I’m just sad there isn’t anything stronger than PSX on MinUI for the 28XX, because if they at least had Drastic Standalone like that one port made for the classic RG35XX’s MinUI, it would’ve been perfect to me for this smaller device.
We shouldn't have to wait too long. Dodo said Anbernic contacted him yesterday offering to send him a review unit so I'm guessing Russ and the RH team probably received the same offer, which means we shouldn't have to wait more than a week and a half for some first impressions videos.
Personally I'm going to wait at least 2 months to buy one, just to give it enough time to see whether or not the hinge is reliable before putting the money down.
Truth be told
yeah the hinge is the big question mark honestly
I definitely wouldn’t be trying to play anything major on this, but Mystery Dungeon Explorers would go crazy on this thing if they could get the Quicksave working.
Russ should just throw it around and flip it back and forth every moment he's awake
the videos make it look and sound solid
This is gonna be the ultimate gameboy device for me
This is one of the few handhelds that I'll gladly be a test case on
I'm going to abuse it in my pocket and bag anyway
The hinge, the screen the dpad. Lots of variables we won't know until it's in people hands
i'm expecting it to be kinda overpriced, i bet they had to do a bunch of r&d on it and they reflect it in the price, like with the 552 being their first actively cooled device
the screen is the same they've been using for years lol
I'm still thinking $75 or under
I'm mostly thinking dpad and hinge
If it's more than that I dunno
ultimate gameboy advance even
it's almost like it was made for it
It would have to have extremely high remarks from reviews for me to consider it above that price
Is it? I thought they needed to use a different screen to loop the ribbon cable around the hinge
i'd pay 90 if it comes out really polished, but i hope they can sell it for less
feel like 75 or so would be the spot
I don't see why it would be higher than that, anbernic prices have been getting better imo
well i'm talking euros, so it's probably around $75 since we pay tax and all that
this is 100% becoming my gba machine since I can just add an overlay
(Sp)
I mean the overlay they show in the videos looks great
Lol yea
Just catching up, doesn't come in white
Was so excited for this 
nah anbernic always makes you pay tax, but no import fees
still that's 21% for me plus their expensive ass shipping
Ah
so i'll wait until it's on aliexpress
Right
or maybe gogamegeek although they've been pretty sparse with info on my 28xx
Think I’ll buy it from Ali too
the silver is just spray painted on so you could spray paint it white
yeah pretty much
Though it's $10 or so more expensive on Ali since they build in the shipping charge
Hopefully someone can make a mod of the SP overlay they showed so that it has the grid…or hell, maybe Anbernic predicted that and has one available that they just haven’t used yet.
yeah although with time they do end up lowering the prices a bit
for some reason anbernics official store on ali won't sell the rg35xx h to my country tho
Equals out to the same for most people
all the other ones of theirs do
Keep in mind I’m assuming they went the simple/cheap route of modifying all the existing overlays to add an SP to the end for their stock overlays.
probably the one in the video
Probably...which would be a shame
yeah i guess the silver with black is a prototype since max himself took the pic
if it's not less right off the bat it'll be less in like a month when they run an aliexpress or a tiktok sale or something
Silver with black buttons gets you 95% of the way there
It’s not like it isn’t accurate, the original silver SP also had gray buttons.
i can wait a bit on it, i'm still waiting on the 20sx and 28xx, budget handheld overload
the fact that it has BT and wifi means it might be priced closer to the 35xx-H
probably way higher
disappointed in y'all
why would it be way higher?
That’s limited edition, the black buttons are for the NES SP.
xxh is close to selling for scrap prices now
the H is going for like $45 right now tho

being the new one, r&d, hype
yuck
My guess is 35xxH priced (actual new price from anbernic, not aliexpress deals price)
But yea
$68? could be
he got it removed before Odyssey
i was gonna say, or zelda gold
if by november they go down to 50 like the xxh is on sales, i'm gonna have a bunch of these lmao
hopefully someone starts making custom shells
Eh but like, in the end it's the same chip and class as the whole rg35xx series
because I want a zelda gold or a minish cap green shell
watch someone make a slate
would be weird to price it in a different category
Even if no custom shells
that's always kinda tough. I don't see a lot of aftermarket shells for devices like these
Every single game after Sunshine, he had his shirt sleeves covering his arm.
but I can see the community dyeing the hell out of it
Silver with a nes decal and red buttons black dpad
rp flip was a bunch more than the rp3+
Especially ones with moving parts
That is one gorgeous sp
"fuck it, trims an existing shell to fit the 35xx SP"
This man pulled the classic “got a tattoo while on vacation, was embarrassed when they got back home”
could maybe replace the top
Wasn't it like an extra 15$ at most?
i think it was more
Did you guys also see their other picture one that looked like a DS rectangle shape?
The SP stands for StamP
the flip also had sliders, analog triggers, active cooling, etc.
but 15 bucks more than the xxh would be $82 already
it was more than just a hinge R+D
yeah the flip had analogue triggers and active cooling
Hell, you could also just get a decal for the silver shell to make it look like the nes one.
anbernic charges a premium for r&d, look at the 552
Then all you need is to find a red d-pad that works for this device.
#1214317939163926548 the pic in there?
yeah it's got me interested, way more than the unicorn
the d-pad is bigger than on the GBA SP
and 10$ in a 150$ device is a smaller percentage than 10$ on a 35xx price
Nope it’s like an actual DS looks more like a DSi
That’s why I specified “for this device”, you’d probably need to get it casted for a resin button (or just a 3d print, but the resin cast buttons usually feel nicer).
It was one of the pictures exactly like a DSi
Got any links or pics of it?
I’m looking for it now
I remember they were talking about selling it as a kit with different color shells and buttons, that would've been fun
and all of these will beat miyoo to the punch
didn't lao zhang reply with "?" as in they're not making that?
all it takes is one fail by miyoo for everyone to think they're dogshit eh
Not what I'm basing it on
i'm basing it on their long history of having issues stocking devices.
Need me a clamshell with the 1x1 720p screen and a cpu that isn't possessed
that's not new or related to the a30 alone. that's been a thing always
Which apparently isn’t even anything more than an old render given this was ZPG’s response to that post.
hell the a30 was in development for years
That'd be silly. And incredible. And my favorite.
