#AM5 CPU pin experts help
1 messages · Page 1 of 1 (latest)
If you are lucky, it's a VSS pin. If you are unlucky, it'll be either Memory Channel A or B. If the pin is not contacting other pins, you can try and find out.
I can't identify the specific pin, since the image resolution is a bit too low for me. Could you take one photo that is straight on, up close to the affected area? I just need to see two borders so I can count it properly.
Can't get any closer?
how do you tell which part of the diagram is the lower left side?
one sec i gotta take another one then
I read it wrong lol. I reference this image for the orientation, then read the pin map.
wait but the longer part of the diagram in the CPU is on the right no?
The CPU is the B&W diagram, the motherboard pinout is the coloured.
yeah
is that picture better?
I think this is PCIE_RXN [27]
but I don't know which PCIe lane that is assigned to.
Those pictures were worse not gonna lie lol
But it looks like you have a second messed up pin
yeah ther'es another bent pin but I can bend that one back
I ain't sure I can bend the one that I shows ya back
that's the one I am most worried about
The one in question is a VSS pin.
You do realize you can just plug in the CPU & find out, right? You don't HAVE to fix it?
The only caution you need to take is to make sure the bent pins aren't shorting with another pin.
From there, plug in the CPU like normal, and test the system to see if it functions normally.
I think you are a little off
cuz the shorter side is on the other side
oh wait.. no that's why you made the dots no?
whoops hold on
Nope. Note the triangle.
The B&W diagram is the bottom of the CPU.
And so is the coloured one, as it turns out 
Oh no, that one is backwards, due to the notches at the top and bottom. Got it backwards
VDD_MISC pin
oo maybe i am lucky then
what does the VSS pins do? i thought they were for voltages or something?
VSS = Voltage Source Supply. A lot of them are redundancies. VSS is typically a ground pin, while the VSS_MISC is quite important. I do not think you can risk any of them going bad—can be PCIe, DMI, other circuits, so on...
thanks for showing me that the triangel really helps
They're both ground pins, but I think the MISC is just basically an isolate ground from the rest. Hopefully, you can sacrifice that one.
Also, I will re-iterate once more—DO NOT try to fix any of the pins, until you have actually tested a CPU in it.
Only make sure a pin is not shorting with another.
You risk more damage fixing a pin.
Maybe. I can hardly count from the low res
i wish i could send higher res.. but ther'es a size limit on discord
so you know what that PCIE_RXN 27 pin does?
You can take one and count yourself now at least! :D
Yeah, it's a PCIe pin
That's really all I know. I won't know which PCIe slot it would go to.
yeah but my terrible question is.. which one is it LOL cuz I can't tell
This is where you have to TEST THE SYSTEM AND FIND OUT
yeah but gpus are very expensive
and so yeah it'd be nice to just throw it in.. but I don't wanna risk something expensive if I can figure it out beforehand.
or it could be a storage drive...
You don't have any GPU at all?
You can't fry anything from a missing/bent pin.
Again, you only have to make sure it's not TOUCHING another pin.
I would just go ahead and put the system together as a test bench, and find out if it works.
If it does, slam it into a case and worry no more