#X870e ProArt bios settings

1 messages · Page 1 of 1 (latest)

void hinge
#

Anyone have bios settings to run 128gb's of ram(4x32) with the 1512 1.2.0.3e update on the x870e proart creator at greater than 3200mh?

mental crane
void hinge
#

9950x3d, I know right...

#

I can get 4x24 at 6000 but thats single rank

mental crane
#

These systems get a bit unstable when running more than two sticks either way. Hopefully @worldly plover can help.

worldly plover
#

Depends on the board

#

And the bios

void hinge
#

Lots of info for boards other than Asus.

mental crane
worldly plover
#

Bios update with 1 stick

#

Then go to 2 and 4

#

See if you have stability

#

Slots 2/4

#

Then swap ram see if stability stays

#

If it wasn't a 4 stick kit you will get incompatibility from diff microchips in the ram sticks

#

Cause they're not all the same

#

But ya you want only 2 sticks generally

#

Your over taxing the memory controller

void hinge
#

Copy that. I can Get 6400 on 2 and 4 and 1 and 3 but 4 sticks of dual rank is still to much even after the update. at least for me.

worldly plover
#

You may get headroom disabling thr igpu on the cpu

void hinge
#

Didn't think of that. I'll give it a try tomorrow.

worldly plover
#

👍

#

Depending on the board the max speed you can do 600p

#

6000

#

Gigabyte tend to be more stable with higher frequency kits

#

Otherwise stick to 6000

#

Manually down clock them to 6000 after enabling expo

#

If your goal is capacity that may make it happen