#🆘︲help-and-support-old
1 messages · Page 36 of 1
I actually had the same issue bridging from OSMO to INJ. Increasing gas fee to 450000 works. Thanks for that
I cant do anything with this sols i cant convert cant bridge
Can you send your INJ address?
can you tell me what's the different between gas fee and the osmo fee? is the osmo fee converted to gas fee?
Done mp
Refresh and try again
Your SOL is already as BANK and can be traded, no need to convert.
You can go to https://helixapp.com to trade.
Yes but when i tried i have an error
What did you try? What error?
iyou talking about me? how do you change gas fee
I want to convert them to inj, but when I try I get an error message, even though I have enough for the fees.
done doesnt work still,
You can use the trading pairs to: SOL -> USDT -> INJ
Or you can use https://helixapp.com/swap
Please refresh and try again.
Hard refresh with CTRL+F5
a few users on different occasions, for example, everything works on my end at the moment, just try again until you manage to sign transaction. We know about this and please have patience until we fix it
Done.
Check the wallet section on the Injective hub.
https://explorer.injective.network/account/inj1nu7tr5f66sg9dndm5hqx7rlfwjc4nsp27umfw7/cw20balances/
is there anyway to reverse this transaction, my sol is stuck and ive tried 3 different things
Did you bridge from Injective to Solana or otherwise.
solana to injective
It finally worked on my phone thanks for the help
You need to redeem from https://hub.injective.network/bridge by clicking Claim wormhole TX, you'll need INJ for gas.
I dont have enough injective for gas, it also says i dont have an injective wallet. keep getting errors when i hit the convert - bank button
!faucets
Receive a small amount of INJ, enough to make 1-2 transactions.
- https://inj.supply/
- https://stakely.io/en/faucet/injective-protocol
- https://bwarelabs.com/faucets/injective-mainnet
For Testnet use: https://testnet.faucet.injective.network/
The funds are in your wallet, you just need to convert to bank and you will be able to trade them on Helix
inj1uxetfs26tw9cmc4qecjh2r97xfwnkyzn7m99su
this is my injective address on metamask correct? everytime i try to use a faucet i get an error
Just click convert and you're good to go, the INJ in your wallet should be enough for gas.
why does it keep saying this then? I already cleared cookies and cache....
I just send you more
Try again
t2C9CuF6wDhqWoVC9bdqhhC4riLAbz4hFKbY6tvER1GyjQYDP6Sa1uiGx1UhqqWCPxUd3X64tEpXpFSBTCuPiYm
The tokens have already been redeemed, please check the wallet section on Injective hub: https://hub.injective.network/wallet
https://explorer.injective.network/account/inj1nu7tr5f66sg9dndm5hqx7rlfwjc4nsp27umfw7/cw20balances/ - check as Lahn said on the wallet page
I connect metamask and get this error, is there something i need to do on metamask for inj?
i dont see this in my metamask wallet
Do i need to add a network or anything?
you cannot see the INj address in metamask, you just sign transactions through it
no no
does anyone know were i can bridge back my injbsc back to whatever i can use. i cant use the injbsc
That is weird, can you try sending some INJ to your own wallet through the wallet page? and trying again?
The pyth tokens are not here
https://explorer.injective.network/account/inj1nu7tr5f66sg9dndm5hqx7rlfwjc4nsp27umfw7/cw20balances/ they are here in this address, make sure that you are connecting with the correct wallet address
I was able to but doesnt work still
Can you try through another browser, you have INJ in your wallet, this should not be happening
thank you
it's been over 24 hours ago that I welded Atom to INJ via Osmosis Bridge via Keplr Wallet.
Now I don't have Atom or INJ, how long do I have to wait for a refund?
Are you currently connected with Phantom?
Can you send TX hash?
Interchain explorer and analytics powered by Cosmostation.
FFS no i am not, i even used my phone and a diff browser, same error
can you please check if its something to do with the solana?
Nope, it has nothing to do with sol, can you try when on desktop
i have no desktop
Can you send you INJ address?
i did on laptop(mac) and phone, both. it is not an issue there. this is an error with your site in some way or something else not being considered
but that wallet address where the phth tokens are is not mine, mine is this inj17t0y54ygvprnphma774u47uazttf5lresncyts
You have bridged to another address, maybe your phantom addresss
why am i repeatedly getting this error
if you did this you need to import your private key from phantom to Keplr for example and you will access it
Uually this error comes from not having any inj for gas fees
‼️‼️‼️‼️24 hours but my token isnt there yet. Anyone can help me? Any admin here?
I messaged here earlier today
Dont worry your tokens will be credited back if they dont go through on the bridges
Id appreciate that. im getting frustrated already. Though it isnt much but, $50 is like a fortune in my country. Id appreciate if i’ll get it back
How do I adjust settings on gas for inj wallet
You dont need to do that, otherwise you can adjust through keplr and other wallets that have native support for injective
I processed it almost 21 hours now and it’s not there yet. Whrn will i know it’s not coming through and someone can credit it back?
No people are involved here, its decentralized stuff
its automatically returned if not confirmed
If I send them from there to injective, how am I going to send them to the same destination wallet?
going to make a video about Injective for my community - is there any place to get the visual assets like transparent logo etc?
Ok so this isnt working, what are my options? i cant convert the sol to inj
!helix - Mb, I misread.
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
??
you are linking an EVM chain to your Cosmos sign in
how do i change this
I had the same issue the first time I used the platform, disconnect and connect to keplr
my phamtom wallet is this CA3njrioMFpJEAmZAWWUH7jWuPWXfeUzV8BjoCQy5Cmt
Go to https://helixapp.com/market and use the trading pairs to trade your SOL for USDT then your USDT for INJ
but the sol is in the evm chain??
You have SOL in your INJ address in which you also have INJ
where are you in the process? the error you showed was saying it was trying to use your 0x as cosmos
please check the hub guide https://blog.injective.com/injective-hub-guide/
can you verify the link @lime sun posted? i don't want to open random google links lol
this wallet is metamask
Yes, i confirm its the drive link for the innjective logos
thx
Yes, and you must connect with your metamask to the hub
Can you try importing your Metamask seed phrase in Keplr or Leap and try to convert again?
how do i extract this seed phrase, its not visibile in my metamask wallet
Your INJ is connected to your ETH address phrase
Settings -> Security & Privacy -> Click Reveal seed phrase to get it.
ok but kepler
i imported metamask key to kepler and tried converting the sol to bank again got this error
hmm can you try again later, in a few minutes
is there a memo?
Memo is provided by centralized exchanges or if wallets support it
Got a question about the faucet - is it basically like a beta that we can test dapps on with faucet tokens?
there is a testnet, on which you can test dapps
so no key found now what?
My BlackPanther rewards token has been transferred to unknown wallet. Also I noticed my BlackPanther delegation was initiated unbond
Please try again later, could be RPC issues, your funds are safe.
I got the same problem, as I said in general.
Your wallet has been compromised
Did you connected to any unknown websites?
I connected to talis, blackpanther, gryphon, mito
inj1w5k92v920nyr9tn22tll66lkkn5eurh9yms3sl
This above wallet has my $black rewards and my $Kira as well
You can check which websites you connected to from your wallet -> Setttings -> Security & Privacy -> Conncted websites
Make sure you're not connected to suspicious websites.
I disconnected from all now. Is there a way to recover my tokens from inj1w5k92v920nyr9tn22tll66lkkn5eurh9yms3sl
Yes, an the faucet provides us with test tokens to play with?
The testnet faucet, yes
If they have been sent to another wallet address - no
i need testnet token - how can i get this?
Send your address
inj1p8a0lafxplh580wzym87xh3ankca2n0dm86ydt
A couple of days ago i used this, the testnet tokens never arrived 🤷♀️ - any ideas why?
Sent
try redeeming the faucet again
One last question - apart from the obvious benefit of testing and familiarizing ourselves with dapps on the testnet, are there any other incentives to use for users to test? One that comes to mind could be airdrops? but im not sure if testnet gives them
Depends on the dapps, if the incentivize their testnet
That makes sense - thanks guys
So there is no answer for "The key has not been found", when i try to convert cw20 to bank?
refresh and try again
Tried on 2 computer, revoked the permisson, added again but got the same issue
It's already linked mate. Why is there no further assistance plz
What is the issue you're having?
Used phantom to bridge sol, now tried to convert with KEPLR, added my phantom wallet to KEPLR
Could be RPC issue, please try again later.
I wrote you before, OK. I am writing again. The galxe mission here https://galxe.com/injective/campaign/GC97qUMvp4
I am the owner of injectives.inj. I can't verify the pnership. It's been like a week I been trying to. I wrote you, waited for response. You told me to contact galxe team. I wrote them, and waited for their response respectively. But they told me the same, to contact you. I can't verify the ownership
The wallet is already linked on galxe.
My INJ wallet address is: inj1np80fx4kmyuyp6a9ygx4cqdnlqntpxrklzwmv5
and thank you in advance, once more
That address does owns the injectives.inj but are you sure the wallet containing it is connected to galxe? If everything's well and the task is still unable to verify then it is an issue from Galxe's side and they'll be able to help you.
i got mine saman.inj
yesi I am sure that it's linked and claimable as there's no deadline. But they are not helping at all, just telling to contact you as it's your campaign
so few people claimed it, I think there should be many others having the same problem as I am
I'm unsure.
You have the domain in your wallet.
Your wallet is connected to Galxe.
You meed the requirements to do the task.
There's no issue from Injective side.
Then I will have to skip it as there is no assistance from both sides. sad...
You can try to claim later, I had no issues claiming on my end.
the nft is minted on polygon
be sure have all your wallets binded to galxe profile
mate, it's been like a week I am telling you that I'm trying every day for several times
have u added your wallets to the galxy profile ?!
Yes I have
can any of you please manuaaly check?
in which wallet the nft was minted, cause only could do it on polygon, using matic.
this is a reply to me?
I have INJ on Cosmos and I'm trying to bridge over to INJ (hub.injective) but it is not happening. Any other ways to do this?
Which nft are we talking about? I am one step back to get the nft. I can't verify owning injectives.inj on https://inj.space.id/
wallet address is: inj1np80fx4kmyuyp6a9ygx4cqdnlqntpxrklzwmv5
You can do an IBC transfer but are you facing any errors on the hub bridge?
hub bridge isn't working. I click "transfer now" and dialogue box opens for me to sign tx, and I do, but nothing happens
may I share a screenshot? dunno if that would help
What transaction are you trying to do, check your history on the explorer https://explorer.injective.network/
Seranium maybe you could help me
you are the owner !!
I am trying to bridge. I followed the explorer and put in my INJ address, but it is not showing that tx.
Can you try clearing browser cache and cookies and retry, also try reconnecting your wallet.
ok
not my INJ wallet. I have Atom and Cosmos on Cosmos
I am! So I need some gas on INJ first?
oh snap crackle pop. how do i get INJ to my wallet then? are there other protocols?
Please check this guide https://blog.injective.com/en/how-to-bridge-from-solana-to-injective-using-phantom/
And also this https://blog.injective.com/en/injective-hub-guide/
dope, thank you
would anyone be cool with sending me a little INJ? and I will send it right back after I get my INJ. I dont have my MM setup for Solana. I have Phantom, hrmm.
I really appreciate your help.
I knew about the first link, but unfortunately it's no longer functional.
I'll look through the other links you gave me and see if I can find more answers.
Thanks again.
I'm waiting for @fickle escarp to, for more explanations, so that I can also contact Kepler support.
Wait, if I'm using the same bridge, don't I need INJ first on that chain?
You'll need INJ to redeem your SOL and convert it to BANK
yes need inj for gas
I'm confused. So I don't have MM, I have Frame, and I'm injecting it as MM, but no dice. Is there another way to bridge INJ from Cosmos?
What's Frame? please use one of the suggested wallets on the hub
hrm.
Since I can't convert my solana to bank, how can I send it back to my phantom address from my injective wallett? Is it a possible way?
ok ok, I'm bridging some SOL over
You can use https://hub.injective.network/bridge
Okay but which chain to I have to use for it?
From: Injective
To: Solana
I have 0 available sol
I am stuck on the "Redeem your funds"
Enter the TX hash of your bridge and redeem.
If my solana is in CW20 I can't bridge it back?
Your solana needs to be as CW20 to bridge back, you're good.
Please hard refresh and try again: CTRL + F5
There is no TX hash for me to input, and my SOL has been deducted
What's your INJ address?
inj1ss5zcfxpja97yvtahvp3nsaksd8mwwvslrkqxe
Here's your TX hash:
DPrqdj689WTgk1ngaaGREbPG224RcbFLKWJgoDJNG2cvG52yZubB3gc7RmWpbhggeEo7DBvvbr71UMjqjqEU73m
whoa
if I need help do I just post in this channel or is there somekind of ticketsystem?
You can ask here.
Origin network is Solana, correct?
As you can see I'm in the same address, but i can't see my sol
Can you try clicking the refresh icon beside the SOL?
Did a lot of time but nothing
Ok thanks. So I just wanted to bridge my erc20 Inj from ethereum to a inj address and I don't see it on the wallet balance on the hub's dashboard.
The tx hash is 532CDAE40F4B313E00570321DA0324D36E3B29F3AF47DAF5C4A8653B9BDB8F9C and according to the explorer the tx just be gone through
My funds are not redeeming...
However on the bottom of the bridging page is a button that's saying "Claim Wormhole tx"
Should I do this?
My thing is stuck on redeeming.
Redeemed for you: https://explorer.injective.network/account/inj1ss5zcfxpja97yvtahvp3nsaksd8mwwvslrkqxe/cw20balances/
Check the wallet section on Injective hub.
Is there any problem with these verification?, I am waiting since 15 days or more
how did you do that? haha ok, i see my solana balance
The funds are already in your wallet: https://explorer.injective.network/account/inj1yddqu0q6gtks6e09davwewl4c56ltmd0e8m4qy/
thank you so much, alright. do i need to convert my SOL now?
Yes, just changed the balance amount on the dashboard the moment I posted here.
Yeah you can but you'll need INJ for gas fees to convert.
Thanks again and sorry for being a little bit impatient
When did you bridge? It might take some time to arrive but they will arrive eventually, they are in your wallet now.
wait, so I was trying to bridge over INJ from Cosmos, and I thought I needed INJ for gas, and that is why I followed this step to bridge over Solana. why did i bridge over from Solana? I'm back at square 1.
My INJ is gone??
Please give more context.
So the thing is that I have over 4 sol in my wallet, but I can't transfer it to my keplr wallet, also I can't bridge it back to sol chain. Any solution for this situation, not gonna lie, I'm a little bit frustrated right now
Well, I think there was like a 5 min gap between the explorer saying the status of tx is on Success and the balance on the dashboard showing the amount that I bridged.
Let me send you some in a while.
i'll send it back, for sure
so the gas that you will send me, I should use that to bridge my INJ from Cosmos, so I can have my INJ on there, right?
Sorry im trying to find more context, but 1.8k inj gone
inj1vf3g49glu24qhpct3klwncg38hnjx9740vq2np
What did you try to do exactly? Please give more information.
I was just swapping some rug pulls coins on coinhall to get them out of my explorer, once i look into my leap wallet i only see 7 dollars instead of 1900
Please send you INJ address.
The last tokens i took out was DOGE and KATI sold them for like 0,001 cent
Then checked my wallet and saw only 7 dollars.. I'm very scared now because i still have big bags of ginger, eric and ninja idk what to do
omfg i see it already
i lost around $25k last night. i know it doesn;t help, but atleast you are not me
Can you send your INJ address?
inj1ss5zcfxpja97yvtahvp3nsaksd8mwwvslrkqxe
Can you try to bridge from Cosmos to Injective now?
I will try now
now INJ isn't appearing to transfer, only atom, haha. ima close/open browser and disconnect ledger
I think you can only bridge ATOM from the hub bridge, you can try an IBC transfer instead.
I can do an IBC transfer from my Keplr wallet?
yes
Yes, you should see the option to do that in the extension.
thank you for your help today. and thanks for that bit of INJ, how much did you send so i can send it back?
No worries.
thank you as well!
thanks for your help. take care everyone, especially those phishing scam. i got scammed outta 9000 OP last night and the pump this morning/today is pushing me to tears.
Please always block and ignore any suspicious DMs, the admins and support will never DM you first.
Is the INJ Testnet faucet working? For 3 or 4 days now every time I enter my Keplr Testnet wallet I get a popup box that says "you are already in the queue for the next batch" but never actually receive any INJ Testnet tokens.
Send your address.
inj1pz576j63jl86mzmjfpt0karequ3p4mkexfakl9
Sent
Excellent, thanks
I’m in the same boat. I am trying to use the testnet but I’m receiving nothing on tokens after interacting with it
Send your address.
inj1x5d5tsapzalfrz6q3yyhfl8jlfkmpddjgq32ut
Sent
@lime sun how can I view it in my Kepler wallet on mobile?
Keplr's mobile app does not support it I think.
You can use Leap.
What about Kepler dashboard on chrome?
Might be, you can check.
It does not. inj14rm3l769ytsfw35hxr77ejkw4sr59pgveymsrr this is my leap if you want to send again.. if not I understand.
Sent
Appreciate it. Hope it shows up. Do I need to import a token address or something
In Leap wallet go to menu from top left corner and change the mainnet to testnet
It’s there thank you !
looking to get some testnet tokens. Tried via Neptune Finance Faucet. Got message saying in queue but it's been like that for days. Any chance I can get some testnet inj tokens from here?
inj1xjcrwsr4aw4k2ny3s9lqes583uzlpvuqr8k8r8
Sent
i hope you could help me:
I used helixapp to withdraw USDT on Etherum.
Transaction:
6892E5194193A8F1EE43098244EC3AE6F64AA8BE3EDEDDCEE462D5085DFDB564
Here it shows SUCCESS, but on etherscan and on my wallet it shows never this transaction?
Any ideas, what happend?
thank you
How long ago was this? It usually takes few minutes but due to heavy traffic it might take longer than expected to arrive.
20min ago
Please wait, it might take few hours at most.
is it possible to have some ?
What do you want?
testnet token. i try with faucet 10 hours ago and didn't received yey
Send your address.
inj1skrt2gk7umx38der52e94rn9hefu5q0f4znf0v
Sent
received. thank you 🙂
Failed to get response from https://k8s.testnet.lcd.injective.network/cosmos/tx/v1beta1/txs
Any time I try to interact with testnet dapps it gets errors. Not possible to do none operations, swpa, lend, borow, nothing is working for me. Any idea how or waht to do to fix it?
The testnet LCD is down, please try again later.
it is like that for 3 days or more!
It was working fine this morning.
It'll be back soon, check back later.
i'm getting a "account not found" error on the Injective HUB While trying to Redeem my funds that I Bridged (6hours ago)
need inj for gas
can share in here so i can send some
i can't redelegate my inj because ekplr say im already in redelegation period
is it normal ?
inj1wr4vfpa7udkw2jy355h5kqa8msqntvhv5g8nyq
sent
If you re-delegate to another validator, you are unbonding from the source (old) validator and bonding to the destination (new) validator.
If the validator is in the Active or Unbonding state, then you need to wait for the unbonding period (21 days) before your delegation is delegated to the destination validator.
If the validator is unbonded, your re-delegation will occur instantly.
Note that when you re-delegate, you continue to earn rewards throughout the unbonding period.
I’m trying to use the Neptune dapp but it only wants me to use Kepler or MetaMask. Is there a way I can connect leap?
we are not Neptune, would have to reach out to them and ask
you can only use the two for now
I cannot redeem my INJ after swapping, i have tried by redeeming with transaction Hash but i keep getting error "wallte xxx not found" while i have it currently open with keplr. Any help? 😦
Fair, do you know how to see the funds in your Kepler wallet?
where did you bridge from?
would need to connect to the hub for that, is it for testnet?
because people warn me to redelegate from black panthers and i can't because i ask for a redelegation to blakc panthers 1 week ago . Do i need to wait the 21 day to re-redelegate ?
Yes
Solana, the transaction gets found correctly because i dont get "transcation not found" error as if i try with other hash
yes
does my fund are safe with black panthers ?
one other question, is it normal, that my withdrawal on helixapp don't show up in the wallethistory on helixapp? Does the wallethistory work properly?
Can you send the TX hash?
The INJ token is always in your control, no validator can take them away. The only risk is from slashing and the slashing rate for downtime is 0.01% and 5% for double-signing. An advise here is to delegate to more than one validator to hedge your risk of slashing.
Pretty sure this guy should get banned, but i can to autorized personnel (with proof of my wallet and everything=
blockNumber: 55162536
blockTimestamp: 2023-12-22 21
20.498 +0000 UTC
hash: 0x6892e5194193a8f1ee43098244ec3ae6f64aa8be3ededdcee462d5085dfdb564
yes it could happen, no need to worry your bridge will be done and your funda re safe

. When you get time
@strong bobcat he is faking being a support member asking for the transaction hash and stealing my funds.. your call but pretty sure it's normally a ban
Anyway how can i get support for my issue? i can provide wallet, transaction hash and everything
he's a high rank on the ambassador program
you can see the role
he's welcome to help other users
but if you don't feel secure you can dm me
Your funds cannot be stolen through your TX hash, the funds can only be stolen if you share your seed phrase or connect to unknown websites, as long as you don't do that, no one can take away your funds.
ok so the only risk is not to earn % ?
you can see the hashes all on the explorer or do i confuse something here?
You're correct.
okay, wasnt sure about the sarkasm
Okay guess im wrong mb
all good ser, answered your dm
Guys how many inj are required to deploy on testnet?
No worries, it's best to be safe. :)
By deploy if you mean creating a token factory denom then you'll need 10 INJ for that.
Thanks
Should I be worried that a validator blocks are missing?
How do I add injective network on metamask
Okay we got it, couldnt get it to work cuz i had no INJ for fees on the wallet. To understand everything tho.. how am i supposed to have some if its my first bridge? I'm still missing a piece 😅
You cannot add Injective Network to Metamask, check: https://blog.injective.com/en/how-to-create-an-injective-wallet-2/
Gas is required for every transaction on network so without gas the transaction cannot go through.
There are faucets which you can claim some INJ from for gas, check them with !faucets.
But when I try to connect to ninja blaze my Keplr wallet dosent let me connect @lime sun
You'll need to add Injective Testnet from https://chains.keplr.app/
If you already added and can't connect then please contact Ninja Blaze's support.
Allright thanks a lot to both of you, just got back to crypto and this new stuff is confusing lol 🥹
No worries, just let us know whenever you encounter any issues, also block and ignore any support/fake admin DMs you may get and report them in #🚨︲report-violation
I'm trying to transfer from Injective HUB to my keplr but i'm getting this message when approving the transaction. It goes everything ok and say that the coins was transffered but it doesen't transfers... I have 0.009 INJ for Gas
Can you send your INJ address? The one you're making transfer from.
inj1wr4vfpa7udkw2jy355h5kqa8msqntvhv5g8nyq
Did you transfer SOL?
Yes
Your transactions are going through successfully: https://explorer.injective.network/transaction/3787492B7F770EFB30E9A21B7647303827B4E2B49BDF70B7EA030C22098D82DB/
Also you're just sending the SOL back to the address which you're transferring from.
I don't see my lp positions and I just noticed that my staked INJ to helix is not on the tier? Yes, my wallet is connected.
Probably rpc issues, what's your INJ address, please ctrl+f5 and check again
Is this FUD ? someone explain please @mystic zephyr @strong bobcat
i have lots of injective staked with black panther
Well, their validator is down, that I can confirm
If i ask for an unstacking i will avoid potential slashing ?
Best to do redelegation
Yes but i can't lol
The re-delegation period is 21 days but the re-delegation itself is instant. You just cannot move those coins again until it is completed
If yoy already used then you are probably going to get slashed
Why I cant see this balance on the Keplr?
Keplr doesn't support viewing SOL on Injective network I think.
You can still see it on wallet page: https://hub.injective.network/wallet
Im already in redelegation period'for black panther so i can't re-redelegate
it means i'm losing my staking rewards so far ?
But i can unstack
nope cuz that lasts 21 days
That might be the case, you can redelegate if you wish, or contact Black panther's support for ETA on when their validator will be back up.
would you recommend redelegating to other validator ?
we don't recommend validators
What Validator should I choose? - https://blog.injective.com/inj-staking-which-validator-should-i-choose/
If you re-delegate to another validator, you are unbonding from the source (old) validator and bonding to the destination (new) validator.
If the validator is in the Active or Unbonding state, then you need to wait for the unbonding period (21 days) before your delegation is delegated to the destination validator.
If the validator is unbonded, your re-delegation will occur instantly.
Note that when you re-delegate, you continue to earn rewards throughout the unbonding period.
how to check active/unbonding state
So can't do anything to avoid slash ?
only way to avoid it is with redelegation
Yes but my first redelegation is not finished
I did refresh. Wallet shows account shows wallet properly. It even shows staking balance correctly. Positions tab doesn't show anything and LP tab above doesnt show my positions...and the staked inj that shows in the wallet does not show in the tier trading discount thing... I need help. Something is wrong.
Unstacking or letting my inj with the validator is the same about slashing ?
yes, remember it takes 21 days to complete the unbond period
hey Dez, can dm the details
Yes but for redelegation it's instant but you also need to waith 21 days to redelegate again
So im fucked lol.
The INJ token is always in your control, no validator can take them away. The only risk is from slashing and the slashing rate for downtime is 0.01% and 5% for double-signing. An advise here is to delegate to more than one validator to hedge your risk of slashing.
So i can loose 5% of my inj stacked ?
up to 5% yes
🫣 and no refund possible ?
VOLAN mainnet inbound boyz ? 👀
Should be fixed soon. (||Maybe?
||)
you would have to ask that to black panther
How do I convert this SOL to INJ?
would need to swap for usdt the inj
I wrapped from inj to solana but my wrapped sol did not arrive I see only this
Can you send your TX hash?
41c1fa6afb56e54137fbe572e4d8c496460b50983b7da425d30f64f15b50e313
I tested it with small amount and it worked then sended the rest and got stuck
tried to redeem and getting this information
One minute.
thank you
I still don't have anything on my wallet..
Done, check your wallet now.
you did something right? what was the error?
You just tried to redeem too quickly, before the transaction fully went through, just wait a while after making a bridge and you should be good to go.
ok thank you
It's been the third day since I swapped the Atom into Injective and all the funds are gone
One minute.
The NFTs are not fully supported on the network but they still available through smart contacts made by Talis etc.
ok! Thank you for response!
I just thought that all my money dissapeared forever
I am not exactly sure about the reason about why you didn't receive the INJ, the IBC transfer should be instant.
Since you swapped through Keplr then you can contact their support, they might be able to help you: https://help.keplr.app/
Where's the money stuck though?
I understand that it is stuck in Osmosis Bridge, owned by Keplr?
Hi! My bridge transaction of SOL from Injective to Solana has been stuck for hours. I just checked wormholescan and somehow the destination address on Solana is a random unexisting empty wallet. That's impossible to be my input, I even checked the Injective hub again and when bridging, it auto reads my Solana wallet address from phantom and the field is unchangeable. There's literally no way I could've changed this. Can you help me out please?
💡Learn how to onboard to Injective from Solana with Phantom.
This article will teach you how to bridge SOL from Solana to Injective, using your Phantom wallet.
This article is for informational purposes only and is not financial or investment advice. The information contained in this article is intended to
Just a minute.
I did that... I can't claim with my Solana wallet because somehow the destination address is different from my input.
should be the same to redeem, maybe you need some INj for gas fees to claim
I have both INJ on Injective and SOL on Solana.
I could be wrong here but it might be possible that it didn't go through because your INJ wallet didn't had any gas, I sent you some INJ for gas, can you check back later? If you still haven't received your funds then you can contact Osmosis support as the bridge was made through them: https://support.osmosis.zone/
You'll need INJ in your Injective wallet to claim.
I have INJ in my Injective wallet and SOL in my Solana wallet.
Can you send the TX hash of bridge?
Can I DM you?
You can send here.
ah.. oke
https://wormholescan.io/#/tx/C79E71B4C4C8FE38D6A024799F1EC6D233BEBA2C4F52ED8ADEF06BFAC1ED3CF8
This is on your bridge of INJ hub
Just a minute.
The destination wallet on Solace is completely different (and correct, it's my phantom wallet, auto-read by your hub bridge) and I CAN'T change that field. I have no idea how wormhole has that destination wallet...
Done, check your wallet.
Appreciate that, thanks a lot!
Connect with Ledger directly.
Can you try to hard refresh: CTRL + F5
Also send the TX hash of the bridge.
Is your Ledger updated to the latest version?
That error appears when your Ledger's firmware isn't updated to latest version.
The current version is 2.73
where to get inj testnet faucet?
Send your address.
Sent
Sent, try to redeem now.
One minute.
@lime sun just contacted with Osmosis support and get this:
@strong bobcat Can you check this please.
here's more info
Will report
Can you try to connect with Keplr and retry? It could be Keplr's address which you bridged to.
You'll need to redeem through https://hub.injective.network/bridge by clicking Claim wormhole TX
Your funds are in your wallet: https://explorer.injective.network/account/inj16wwmp7ve5uh5h54f7t6ggpj9q5yrvaslhy0nag/
You can see them at the wallet section of Injective hub: https://hub.injective.network/wallet
!helix
Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).
💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf
Already got answer from OS (thank you) but would love more info pls.
never got my swap
i did from kepler wallet yesterday 3PM
atom to inj, got nothing
contacted osmosis, told me its from inj side
"You may be able to ask INJ to clean the relayer
there are 4833 pending transactions in their relayer"
https://chainsco.pe/osmosis/tx/0FE1CF2395344E050CABDECE02F6C0E9645508E49D59E4DEC86CEF087C8A1A6E
Blockchain Explorer
This is a known issue, don't worry your funds are safe and should arrive when everything's fine: #🆘︲help-and-support-old message
question - do i need to add inj testnet to recieve test tokens?
You don't, you might have to do that when trying to use dApp's testnets.
Send your address.
i have to connect my wallet ? ;_;
cheers - inj18lsdddpnpvqfzx5z0n48d79pxuwsuke00sdazx
No, the issue will be reported to the team, please wait until then, sorry for the inconvenience.
hmm.. don't seem to see it in my wallet.. maybe it's taking a while?
strange..
Testnet token's value does not appear in Keplr.
Also you need to add the Injective Testnet from https://chains.keplr.app/ to see your tokens.
so there's no way of seeing the tokens on Keplr - also, kinda unrelated question - i though keplr was built on inj but apparently it's on cosmo? could use some clarification.. 😃
Keplr is a cosmos based wallet and cosmos is a network of many different cosmos based chains.
Hi there - I bridged USDC to my INJ Kepler wallet and it shows up as unswappable (no value). I can see it in the hub and explorer but can't do anything with it.. TX: 5F7592A21492463F58638FF6AAE76E386EC60DFAE31B9ECE04051E713ED99822 Prob user error but can I bridge back and or swap to INJ? Thanks
There are no trading pairs for USDC, you'll need to bridge back.
Thank you - suggestions on bridge? Doesn't seem to work w inj Hub nor Astroport. Doesn't recopgnize Kplr wallet.. been trying to figure out for a while
okay - and i'm guessing cosmos is a L1 which other cosmos-based chains are built on (L2s) but inj isn't built on cosmo, it's a L1 itself - just that keplr supports it and no more?
What do you mean doesn't recognize? You should be able to bridge back through https://hub.injective.network/bridge, just select the Injective as From: and Ethereum as To:
No, check https://v1.cosmos.network/intro to read about it in more detail.
I've tried to use the Keplr address as sender and ETH as "to" (same adresses from orig transaction) but I keep getting this error I'm sure I'm making the same mistake...
thanks chief - please excuse the ignorance, trying to understand everything bit by bit 👍
Do you have INJ for gas fees? Send your address if you don't.
Thanks for looking: inj1p7kyln5ttg83wd5225jvzqvfy02wpzfashc4zz Have enough
You're connected with the wrong address.
Make sure you connect with inj1p7kyln5ttg83wd5225jvzqvfy02wpzfashc4zz
When I connect with that one this is the error. I connect the To t-ETH MM but I can't keep the hc3zz in the from...appreciate the help here btw
Ah, can you try importing the seed phrase of inj1p7ky. . .pzfashc4zz to Metamask and try again?
Make sure to edit the destination address to the ETH address you want to receive your tokens on.
guys, I need help. I'm new to this ecosystem. I test bridged 1 inj from eth to injective through gravity bridge. Now I have Inj IBC token, I can't do anything with this token. How to normalize IBC token into INJ normal token?
Gravity bridge? You should only bridge using the official bridge: https://hub.injective.network/bridge
You might need to bridge back your token, I am not sure if anything can be done with it.
ok thank you, so I need to bridge back Inj IBC into eth first. I'll try, and I bridge it back via injective hub
You can try swapping it for atom or try to do an IBC transfer to your INJ address but I'm not sure if that would work.
ok noted. thank you so much
No, use the same bridge you used before to bridge back.
Guys is the bridge down? I'm getting a huge ass error message when attempting to bridge INJ from Injective to Osmosis
What error? Which wallet are you using?
Keplr. I'll try to take a snip
This happens after I sign the "transfer now" transaction.
ledger have some issue currently, please use another wallet to bridge
Ah, understood
where can I find dex for atom?
You can try that within your Keplr wallet, but I'd recommend bridging back using the same bridge you used before.
ok thank you
Thanks got the testnet tokens
by the way my transactions are not going through - keeps failing . is that a known issue as well
Working fine on my end, try again later.
i'm trying to connect to metamask but its just stuck in loading. anyone else have this issue?
which Dapp you want to connect metamask to?
please take a screenshot
still doesn't want to recognize the seed phrase in mm have cut/paste + manually tried to add an account . can't get the bridge to recognize Keplr as it isn't an option. Is there a different bridge that recognizes Keplr and can bridge back to eth? Thanks!
does anyone know how to add the injective testnet to kepler
I'm not sure. i'm on the injective website and clicked wallet so it prompted me to connect a wallet and i chose metamask
please clear browser cache and try again
You need to add Injective Testnet as a chain on Keplr -> https://chains.keplr.app/
ok
it says its added but i cannot find it. in my kep dashboard
click manage visible chain
Yeah it needs to be the EVM wallet because you're bridging back to Ethereum.
You can try to import your Keplr's seed phrase in Metamask and connect your Metamask and you should see your Keplr's address connected, then go to bridge and then it shouldn't have any issues, just change the Ethereum Destination address to the ETH address you wanna send your tokens to and you can bridge.
OHHH GOT IT tysm
In this case I'd suggest transfer INJ from Keplr to Metamask
Yep that might be better option, they wanna bridge back USDC.
You can also go ahead with Vyz's suggestion, just send your USDC to the INJ address associated with your Metamask through the wallet section on Injective hub and you should directly be able to bridge back.
will try a small amount and see- good suggestions both- thanks
guys any update about black panther ?
Please reach out to their support team
thanks that worked
does anyone have aeroscraper discord. i cant find it
you mean astroport?
nope its aeroscraper
i keep getting this error msg
tysm
which dapp you trying?
is there anything i can do to remedy it?
I am using the mito testnet
it’s under maintenance ahead of the upgrade
oh mito testnet is down for maintenance is it?
yes
Getting the same on another dapp, this is generic for injective testnet, right?
Any ETA for when it'll be up again or when the upgrade will be done?
there is no ETA but very soon
Like in hours, days or weeks?
We can't pre-announce. The team will share when everything ready.
Nvm found a way to fix it, it's working now, thx!
Nice job you two. That worked. Connected MM to Inj Hub. Copied address. Disconnected, connected Keplr. Used hub Wallet to transfer to MM address then bridged. Well done.
okay thank for the info
Having trouble using Keplr wallet with Helix
what is the issue?
deimosxzy
scammer, plz block and send it to 
thanks for reporting
My MM wallet was compromised and all funds gone except the delegated INJ. I have INJ that will unbound in few days. Is there a way to move it to safe wallet now?
what happened to MM mate ?!
We are sorry for your loss. Currently we can't help because your mnemomic got leaked.
You still can get help from third party service on Injective ecosystem. Some validators providing service to help people like you. Please do your own research and stay safe
https://atomscan.com/validators/cosmosvaloper1hkqejlyrj9h8knms9hwvrnp9xhqvjqlseh06vq
What is the wait time for redelegation of stake?
21 days from you confirm re-delegate
Any idea how to fix this guys?
It's been like this since yesterday 😦
it’s under maintenance ahead of the upgrade
So I can't participate in testnet projects atm?
ahh, so just as long as unstaking, noted
you can try, it is working but not 100% properly
Tried a few times, but the tx could'n go through since it could fetch the ballance 
everything will back normal in the next chain upgrade
actually its not just mito, i tried hydro protocol as well.
transactions are failing
Currently testnet is under maintenance for upcoming upgrade do you can't interact with anything testnet related. Hydro inclusive
How to get roles
!roles
Guild Roles https://guild.xyz/injective
Gamer Role #🎲・fun-zone message
Warrior Role; Hit level 5 on Discord by engaging with the community, can farm XP on #🌆|chit-chat
For more Ambassador Roles, please check out: https://injective.xyz/ambassador_overview
my injective hub wallet has "factory/inj.." token addresses with as you can see a fair amount of tokens - im assuming this is some spam etc ? first time im seeing this
maybe it is some memecoins you bought
these illustrate as "untracked" compared to the memecoins and other Cosmos coins i have
So they are spam/unsupported coins, you can ignore them
figured - i saw the convert portion and was like this can't an airdrop already lol
There is an impersonator on X - https://x.com/Injvctive_/status/1738399760321564696?s=20
thank you, please report to twitter team
Done
Guys, i got a transaction failure when bridge my injective from osmo to injective protocol. It's always saying out of gas in location, but i have more than enough inj or osmo balance on my wallet, i've tried increasing the gas but still always got an error.
You can try with ibc bridge on keplr wallet
how
You can google it, there are some walkthrough
Oh nevermind, i've figure it out
Tried to send some ATOM bought on coinbase to Keplr wallet, didn't get there, didnt get there, what gives?
please reach out to keplr support
i have deposit funds to ninja garden beta but still zero can't buy keys
Please check with the respective team on their server regarding this.
they have redirected me to this link
the issue on ninja garden dapp, please ask them
please give me the link?
you can see their contact in their website, which you deposited funds in
okay i thought it was official.
when you redelegate how long is the wait before you can redelagate again? was going to move some but said the first one must finish first.
21 days
When withdrawing from CEX you need to put a memo. Did you do that?
i have a major issue with injective hub i tried too bridge some crypto and it has completely disappeared i used a phantom wallet too do so but it has not worked who could i speak with
you can DM me the bridge hash I will check
you can DM me the bridge hash I will check
thank you
jeromygreen it is the same exact case ??
woah
yes, it is the exact same thing. I just read your issue.
when i try to claim, it says "You are connected to the wrong wallet, please use Metamask"
Is bonus block working properly? I did multiple social posts for Injective ecosystem and mentioned the official injective account and the other ecosystem accounts but its still not getting counted.
We're fixing that issue please standby.
the 'aliens on injective' project just bridged more than $300k INJ to ethereum which they presaled about 16 hours ago.they promised to refund but nothing happens,and they said they'll launch on dex 5 hours later,if they want to rug i think they'll dump at 5 hours later and more people will lose their money.idk if they want to rug or not,but if Injective Team knows some of them team members pls help to find out what is happening.
Having trouble with redeeming assets via the injective bridge, can I get someone to help please 🙏 ?
what issue is that
Which network did you bridge from?
Yes, you can DM me with more details
thanks, will do
Because there is $INJ that needs to be refunded, there is no need to cross-chain all $INJ to Ethereum. So I have reason to suspect that they have rug tendencies.
This matter is urgent. To prevent more people from losing their money, please pay attention.
how to get ninja pass?
https://blog.injective.com/en/introducing-the-ninja-pass/
Check this link
To kick off the one year mainnet anniversary, Injective is launching the Ninja Pass: the ultimate all-access passport to the Injective ecosystem!
The Ninja Pass will serve as a gateway into exclusive Injective products, events, giveaways and many more surprises. With only a limited quantity, the Ninja Pass can only
can you give me code?
No, because i don't have
where currently giving pass?
can you forward my issue to the inj team.it's urgent.thank you.
Through dapps build on Injective. You can do own reserach if they have active campaign for Ninja pass
Yes, let me see
Im having this issue when trying to connect wallet to INJ :
"No Ethereum public key. Initialize Ethereum app on Ledger by selecting the chain in the extension."
I already have the ETH app open on ledger...
Can you disconnect and connect again with your Ledger?
Ok thanks. I found the issue thanks to your comment, it had to do with having connected an ethereum account on keplr.
You can search on your own
If I have a question about how to create DAPP, is this the right channel?
Wen 1st anniversary of inj ?
Injective is on mainnet 2 years already
What's the date
The 2nd anniversary was on 8 November 2023
I'm having trouble understanding the guidebook, then I'm confused about the flow, do I have to install docker first or create a contract?
Please re-direct this to #🚀・dev-support
Injective (Testnet) does not appear on the Keplr Dashboard. Is this normal?
You can connect with the Keplr on the injective exchange testnet, or hub testnet and operate
Injective (Testnet) Failed to query response from endoint
That's probably Keplr has issues with RPC
let me check for more info
I searched for the Endpoints but couldnt find them anywhere
I always get error... on almost every platform with testnet (Mito, Hydro, Exotic,BlackPanther...)
That's a LCD issue, you can try another LCD endpoint if you wish to.
Try
https://injective-testnet-api.polkachu.com/
Why my poin still 0
Yeah the upper one is the official LCD of testnet, just wait till it's back up or try another.
Can anyone advise why im getting this error? im trying to view my testnet tokens
Thank you. Also, were can I find the Injective (Testnet) Contract Address to add token into Keplr wallet?
Same issue, we trying to look into it
Testnet LCD endpoint is down, check back later.
i'm getting this error too
Anyadmin? Why my point staking vault stil showing 0?
Ah ok cool. Thanks 🙂
Where you see that? On which site?
Panter staking sir
Please re-direct this to Black Panther support team
Sorry im wrong room😁🤣
Am equally having the same issue
Its the same for everyone.
If you have some updates pls let us know
Are there any problems known when using Ledger+Kepler?
Yes, that is known issue. You can't do anything if you are connected with Ledger and Keplr
it will be fixed in the next chain upgrade (very soon)
That why we need a simplified way to link the two block chain together
I think as injective is a layer 1 block chain, layer 2 was created for efficiency and to remove this glitches
Will keprl be supported in the guild/injective?
I hope so, so that people don't get discourage
Keplr is already supported wallet on the Injective
That the glitches am talking about
I cant connect it to https://guild.xyz/injective
I dont get the option to choose keplr
how to fix fail to fetch, pretty much on most testnet dapps on inj
Testnet LCD endpoint is down, check back later.
Is there a way-around? Because this means I can not use any of the platforms now ... and miss potential airdrop too
As I understood just with patience
i c thx guys
Do you also use Ledger or not? I face the same problem... Ok, read now... Testnet LCD endpoint is down 😀
How can i move funds from INJ to Metamask?
You can use Ethereum (Peggy) bridge on the Injective Hub: https://hub.injective.network/bridge/
I try but when i connect my metamask and i try the transfer it says my kepl wallet isnt found
Can you disable your Keplr extension and try again to connect with Metamask?
It says: account inj1dr7002pu5cdjktsnyysgzxxjz2aqv5qw4nlarw not found.
Any other decent way i can send my USDT off INJ to an exchange or ssomething.
But you don't have assets - https://explorer.injective.network/account/inj1dr7002pu5cdjktsnyysgzxxjz2aqv5qw4nlarw/
@Achilleas | Injective i bridged polygon to inj through the injectivehub bridge but i get no inj
You need to redeem them
how
When you connect your Metamask, your Keplr wallet's INJ address gets replaced by the INJ address associated with your Metamask.
I think i see the mistake, it is on my cosmos part or whatever, looks like
If you have USDT in your Keplr wallet then you can send it over to the INJ address associated with your Metamask and bridge using that.
do you have any tutorials on how to redeem inj after bridge
You can DM me with details and i will help you
You can redeem from https://hub.injective.network/bridge click Claim wormhole TX and enter the TX hash while redeeming and click redeem, you'll need INJ for gas in your wallet.
how can i get inj ?
Receive a small amount of INJ, enough to make 1-2 transactions.
https://inj.supply/
https://stakely.io/en/faucet/injective-protocol
https://bwarelabs.com/faucets/injective-mainnet
Get some instant free INJ Injective to pay for gas fees. No ads, no hidden flows, just get started trading in Injective. Use responsibly!
Get free $INJ for Injective! Complete a captcha and post a tweet, and you'll receive your tokens. The amount sent is perfect for testing out Injective!
where can I swap ARB on inj network for INJ token? I converted ARB to Bank via the injective hub but I want INJ tokens
ARB is not in the token list to swap.... what am I missing?
You can check for spot trading pairs
I fixed the Conflict in Wallet accounts that happened to me yesterday, after i installed a fresh new Linux OP, kidding. but honestly, this issue should be solved by the FrontEnd team, bc i see my balances of wallet account 3, and it is connected to wallet account 1. Anyway to others if they run into this issue i fixe it, all the clearing Cach/Cookies and others that is ofc i did, changing many browsers also not work for me, what work for me when i clear Keplr and Metamask Cash, and find that metamask is connected to Helix web app with the account 1 even if metamask is on account 3, so i disconnect account 1, with what i mention about Keplr and metamask cash and connected sites, and it is work good. by the way, i didn't get help from INJ team, i DM one of the team he told me to DM me and never responded, anyway i hope this info be helpful for others.
is wbtc supported on injective?
No wBTC spot market
where can i check spot pairs?
tremendous - thank you
I have 100 Injective tokens mostly staked. Is there any benefit of this like, ninja pass, nft or ambassador role?
for staking you receiving rewards ->
For ninja pass already answered
Ambassador program is different thing
!ambassador
The Ninja Masters Ambassador Program allows participants to engage with Injective like never before and earn exclusive rewards!
To get started as a Ninja Ambassador you must be:
1️⃣ Following the official Injective Twitter: https://twitter.com/Injective_
2️⃣ Joining the Injective Discord Server 🛠|tasks channel to begin completing short tasks to start leveling up.
3️⃣ Reading the complete program details: https://injective.xyz/ambassador_overview
I accidentally transferred inj to binance without memo. Have I lost my money?
No, but your funds are now stuck
please reach to Binance support team
do you know how to contact Binance support
Despite multiple times, I can't get my funds out of Black Panther's INJ/USDT grid trading vault platform. transactions listed as success, but no USDT (or INJ) refunded?
Tried lending on neptune testnet - got this error: Failed to get response from https://k8s.testnet.lcd.injective.network/cosmos/tx/v1beta1/txs
Any idea why?
submitted appeal on Binance, thank you
Please re-direct this to Black Panther team support
Yes, we are working on this, please stay tuned
cheers
I bridged arb to inj yet not tokens have popped up neither a transaction is there
Did you redeem them?
wdym?
You need to redeem them, to see your assets on the Injective Hub
can you send me your transaction hash?
In my DM, please?
thats a very strange and unintuitive system. I've found the hash and pasted it in the to claim area, now there is a circle spinning. is it meant to hapen quickly?
Everything works on my end. Like i said, can you send me your Transaction hash in my DM?
sent friend req
Are u online buddy
this is all i get
Yes
Is it possible to get ninja pass through collab
man over 8k inj stolen on aio presale from aliensofinjective can u help pleaseee
No
need more details, but if you click on scam link, then i'm sorry
we can't help you here
Ok cool
ser please i lost 750 usd
But we can't do nothing there
it's third project
we don't have any access there
😭 😭 at least u ccan talk team or just something mann
Sorry for your loss.
can i check if anyone has encountered difficulties of transferring inj out from injective hub
What do you mean
it always shows maximum stack size exceeded (have tried to send it to different addresses) although i have enough amount of inj in my account
Can you give me more context, are you trying to bridge ETH to INJ?
like transferring inj to other wallets from injective hub
from one inj address to another?
yes
Can you give me more screenshot of the error or more details on it and which wallet are you using
just shows this
Can you DM me with more details for how much are you trying to transfer, which coin etc..
using phantom but the icon shows metamask
Phantom is not supported wallet, thus the issue
You need to use a supported wallet in order to sign transactions on Injective
You can take your private key from phantom and import it to Keplr
ok thanks let me try
Is there revoke on inj??
there is no allowance option on Injective, there is no revoke option atm
If so, is the wallet connected to the ailen site safe?
Helix app keeps automatically connecting with a Kepler wallet that has no funds. I don't even know where this wallet is coming from
How to select the wallet you want to connect
Yes
disconnect and select the desired wallet
There's no way to select the desired wallet. I have it open looking right at it. I select Kepler as my wallet when connecting but it keeps connecting to this random empty injective wallet. I'm not even trying to use injective
From the top right of the screen where you see the address on Helix, disconnect your wallet and then try to connect your Keplr again, if your Keplr has more than one wallet then you should see all the wallets available, just select the one you want and connect.
I do all that but I never see all wallets avail. It just auto connects when I select Kepler when it asks which wallet
Go to Keplr's settings -> Security & Privacy -> Connected websites -> Disconnect Helix and try again.
how many addresses do you have in keplr itself/
Well I just checked, its actually the profile I want to use but it connects to the injective wallet when I'm trying to swap Celestia
Helix won't connect the Celestia wallet, Helix is for Injective network.
Lol well that explains it. OK thanks
thanks
So you're saying we don't have to do anything?
Yes
thanks
I want stake more INJ to blackpanther
https://hub.injective.network/staking
I get this error: Keplr doesn't support injective network. Please use another Cosmos wallet
Keplr has native support for injective
do a hard refresh and re-connect wallet
Still the same error ...
Can you try with another browser?
Anyone have ninja blaze discord. All they got is invalid links
@low isle
ty
@fickle escarp
Can we call that we are safe if we disconnect from all connected websites? I am not sure if you see recent news from aliens on injective side.
Disconnecting should remove the website's access to the wallet extension.
I can't find the peggy bridge contract address on the injective side, does anyone have that handy?
You can see more details here https://docs.injective.network/develop/modules/Injective/peggy/params/#peggy_id +
https://docs.ts.injective.network/core-modules/peggy
thanks 
If you disconnect all sites from your wallet, the wallet remains safe.
I messaged the other day - wondering why it’s not showing me any LP rewards for a token I added LP to
Can you give me more details
Sure, I added a couple thousand dollars into LP on $HACHI a couple of days ago and it’s not showing any rewards on astroport
Please notify astroport
hm I'm honestly a bit redacted and still can't figure out how to find the injective address someone sent a deposit to
e.g. which inj address this deposit went to
https://etherscan.io/tx/0x701aed7909b73c2e183cd025f0deabe205fd8471a995afc2d115d5c4541e8281
how do you deposit INJ to MEXC? It's giving me BSC and ETH as network.
Mexc does not support Native INJ.
oh I see
I tried bridging from INJ to MATIC but the transaction is stuck on pending
Have you redeemed it on Matic?
yes
should i cancel the transaction on metamask and try bridging again, is it possible?
no, wait for it to confirm on matic
issue ongoing between osmosis and injective hub. bridge is not working.
Bump up OSMO gas to 450000 or higher and it will work
I have a problem with claming Galxe inj.domain owner task
I have minted my inj. id before but now I cant calim this task
You'll need to link your Injective wallet to Galxe to claim.
Actually I have linked it to Galxe inj1n0ug3hcm366m8uwk462vka9j46kep0a6lw0pft
If you meet the requirements but still unable to claim then it could be an issue from Galxe's side, please reach out to their support: https://discord.gg/galxe
do I keep my keplr wallet connected to black panther and talis protocol in order to try for airdrop? I'm adding liquidity, trading nfts, etc. Sorry for all the basic questions - appreciate everyone -y'all work HARD!
That shouldn't be the case, you can disconnect and always just reconnect when needed.
Anyway to fix this?
out of gas in location: WritePerByte; gasWanted: 300000, gasUsed: 300359: out of gas
Have added gas amount of Osmo, Inj, etc. Hard refreshed, cleared cookies, reset wallet, etc.
What're you trying to do? After the last update you should set the Osmo gas to 450000 or higher while signing.
Good 👍
You can refresh your Keplr wallet … if you are using an extension on your laptop you can clear cookies and if it’s persist… open a new chrome and download the Keplr app, restore your wallet and try again
It should work… that’s what I do
I tried trasnferring ARB from Arbitrum to INJ on Metamask but it has not appeared. It has gone from Arbitrum. Transaction 0xa1f2e1600c1071de62f67c5952dac567b48b1be761a84edf762f992570662e0a
Can anyone help me understand what has happened? I used injective bridge https://hub.injective.network/bridge and at the bottom it says no transactions have happened and the 'Claim Wormhole Tx' does not resolve it
any new about the testnet ? It's still not working for me?
Done i just redeemed for you - https://explorer.injective.network/account/inj13k89dqu62ee9y06a62e6r69089kjypjxlstyct/cw20balances/
You needed to redeem your transaction on injective
Ok thx
Make sure that you are using the correct endpoints - https://docs.injective.network/develop/public-endpoints/#mainnet
We made a change earlier
Ah, Keplr is using old LCD.
Change to the new one:
https://testnet.sentry.lcd.injective.network/
Thanks. How do I redeem the transaction on injective?
Thx i don't know how to do that but i'll look
Settings -> Advanced -> Change endpoints
Thx i try
It work thx !!
Any idea how to get https://testnet.hub.injective.network/wallet/ to recognize my USDC/USDT in my wallet? It used to until the last 4 days or so
You can do it through the hub bridge page, there is a button redeem wormhole transaction
Can you give me more details
I don't have the ability to select USDC/USDT as a testnet asset to move from 1x wallet to the other
Make sure the address connected is the right one and make sure you are using the correct endpoints
I join the mito mission but why i can't verify on galxe? I using same evm address for the mission and galxe
Can I get some help with this TransportStatusError: Ledger device: Invalid data received (0x6a80)
what are you trying to do exactly?
I'm trying to stake through cosmos hub with ledger wallet
Directly through keplr?
Ledger live has native support for injective btw
What are the correct connection end points?
Yes, basically it quest the transaction, asks me to approve, then kinda dosent let me get to the approval part on the ledger
What do you advise?
Can you staking directly through ledger live
I cant see the Inj there
thats because its different wallet address
so I bridge from eth to the inj wallet address
Your INJ is on which blockchain?
inj12xct02c2lzaqu6yjn8cq5ueautmssptf5qktze
its not showing in my keplr dashboard, only shows in injective web app
Can you try connecting to the hub and stake through the hub https://hub.injective.network/staking
If it shows on the Injective hub then your funds are safe.
Thats how Im trying to stake
I got the error: missing field gov_chain when instantiate te cw 20 contract, how could I fix that?
Please forward to #🚀・dev-support
Click Delegate and you should be able to stake.
I get that error
Which error?
TransportStatusError: Ledger device: Invalid data received (0x6a80)
is your ETH app open?
Searched around a bit and looks like it could be because your Ledger's firmware isn't updated to latest version.
I had those endpoints and it is the correct wallet. No change. I still cannot move the USDC/USDT
Are you on Testnet? Please try again later.
Yes, I am on testnet. Is it still being worked on?
I think the testnet is under maintainence ahead of upgrade, please try again later.
Thank you
Its not in maintanance, we have made a few updates but the testnet is up
I see, could be an RPC issue maybe? Having the same issue on my end as well, the balance does not load.
On the Testnet hub only.
Most likely, but I dont have info on this yet
I try to swap some ATOM to INJ via IBC or TFM using Keplr Wallet, but I get this error: No Ethereum public key. Initialize Ethereum app on Ledger by selecting the chain in the extension
Afaik Injective is built with Cosmos SDK, right? So what's the point of this Ethereum dependency?
You need to have ETH app open in ledger in order to sign transactions on injective through ledger
otherwise dont worry there are no eth fees involved at all
yes Rabby wallet
ah, Rabby wallet is not supported wallet on injective
Maybe this is the reason for your error
No, its not working with the Ledger Ethereum app open. Its not even trying to create a tx i could approve.
The error message shows up when I try to 'connect wallet'
What type of transaction are you trying to do? a bridge transaction?
Sell ATOM on Cosmos Hub for INJ on Injective.
I have the latest firmaware
You can directly bridge your ATOM to Injective and easily convert it to INJ through Helix.
with ledger, ledger has issues with IBC transfers at the moment, it will be fixed soon
So it should be fixed by using Hot wallets without ledger?
Yeah, hot wallets such as Keplr and Leap should have no issues.
yes, as a temporary solution
Just to clarify, Injective is a Cosmos SDK based chain, right? Or is it a Eth L2?
I am using a eth wallet (rabby), latest ledger firmware. What do you suggest please
It is a cosmos, tendermint based blockchain, for Ethereum signing transaction injective uses EIP-712 to do so
Rabby is not supported thus the error, you need to use supproted wallet be it ledger directly, metamask, keplr etc..
bumping dis
Ok, thanks. Will try with hot wallets. Thanks!
Why do i not have a inj wallet adderss that populates in comos?
What do you mean?
Any update on the bonus block issue updating social post points?
Looking for help to find the right transaction hash to claim my bridged funds. Went from Solana to INJ. Any advice?
What's your INJ address?
inj18jg0fzaqrquq00uxj376k0ue4malq6c9ej9qtn
10 SOL
t1NuDEbhNNgW6Jy5QFGJtXdqrfumEVuuhSXJCancr8J2mgsH3TkMb7y8HEsWC9Tryp2dMJrLQmoBC6vKfBvgXHE
0.01 SOL
4ZtUXoNeCeKufDYziKfww2mFkz4HtryFtKSUWbUJ7oFb2S5VxWV14tzCa1kBvAYz2ZSkgMWGniS9uyogRLfCerEz
this might be what i need, once i have gas. what did you use for this lookup?
Am I able to swap ERC20 INJ for native for gas?
You should be able to bridge them from Ethereum to Injective network with: https://hub.injective.network/bridge
I seem to have lost my SOL trying to bridge to Kplr INJ wallet... is there any way I can get it back? I got the solscan link
Did you get any error when you made the transaction @visual bobcat
You need to redeem on injective
yes, but can recall what it was
💡Learn how to onboard to Injective from Solana with Phantom.
This article will teach you how to bridge SOL from Solana to Injective, using your Phantom wallet.
This article is for informational purposes only and is not financial or investment advice. The information contained in this article is intended to
What error was that, can you provide more details @visual bobcat
Btw block and report in #🚨︲report-violation if you get any DMs for support.
You need to redeem your transaction
Please check the guide for sol https://blog.injective.com/en/how-to-bridge-from-solana-to-injective-using-phantom/
💡Learn how to onboard to Injective from Solana with Phantom.
This article will teach you how to bridge SOL from Solana to Injective, using your Phantom wallet.
This article is for informational purposes only and is not financial or investment advice. The information contained in this article is intended to
I was using Phantom as source and my Keplr wallet as destination. The error came in between step 9 and 10 (not using Metamask)
The SOL is already in your wallet: https://explorer.injective.network/account/inj1dzkkk8chxlmzuh8m82spnhsxgxv45xytz25yyp/
This is a common mistake. Always learn to connect your metamask first. That step is very necessary.
Connect to the hub with keplr and redeem your funds on injective
That confusing to me... INJ network is available on Metamask?
You can connect with metamask to dapps and sign transactions through it
ohhhh. For some reason I was expecting INJ in Keplr no SOL. Live and Learn!
Yeah, if you bridged SOL then you'll recieve SOL, if you want INJ then you can use https://helixapp.com/markets to trade your SOL for INJ: SOL -> USDT -> INJ
Got it! Makes sense
You guys on the ball! Much appreaciated
Inscripton was going to appear in tia and I didn't have tia in my hand. To convert my inj to tia, I clicked on the swap place in my Kepler wallet to convert my injs to tia, I approved the incoming TX and 2-3 days passed, I did not receive the tias, so I am writing here because I don't know what to do
tx:152A4846241165CCB8012A5F21705A5034B803CF48F89A61477717A858D4B21B
You used the swap within Keplr wallet?
Kepler does not appear in my wallet, but it appears on this site. What should I do?
Just checked and it showed success on the explorer. You tried to swap within Keplr?
I don't grab what site is this and what are you trying to do. Keplr doesn't appear in your wallet? Keplr is a wallet itself
What're you trying to do? Which site is that? Hallswap?
I cannot see the token in my Kepler wallet, but when I connect to the osmosis site with Kepler, I can see my TIs.
yes, can see it when connected to the hub also https://hub.injective.network/
i cant see tia
Oh that's because TIA is not in the list of tokens in keplr. Point is your funds are intact. You can also see it when you connect to the injective hub
Follow these steps if you want your TIA to display on Keplr
- Open & search for "Celestia": chains.keplr.app.
- Click on "Add to Keplr" and approve.
- On keplr, go to settings.
Click on "Manage Chain Visibility". - Search for "Celestia" and click on "Save"
Any support team here to help?
I created an injective wallet using the coin98 wallet app. Now I try importing the wallet to keplr but it keeps bringing up another wallet address😟 .
And yes, I confirm that the seed phrase is correct.
I spoke with coin98 and keplr support and they said the wallet address was created using the injective wallet address old standard and now keplr only support the new standard, and I should talk to the injective team if there's any way the wallet can be recovered. Thank you🥲 .
PS: I have an NFT in the wallet and can't access it from coin98, hence why i need to import to keplr
It's showing correct address in coin 98 if you import it?
You can access your NFT in your coin98 it's only a matter of connecting to a marketplace like Dagora.
I don't think TALIS supports Coin98 so prolly why you can't access it.
@strong bobcat come check this out
it's already the active wallet in coin98
The NFT is from quant collection, and quant is not listed on dagora
Can you try installing Coin 98 in another Browser profile and try to import your seed phrase to see if it still imports the correct one?
Yeah I figured. Try importing your Coin98 into MM and connect to Talis and see
says account not found when I'm trying to redeem on bridge, what am I doing wrong? sol to inj on hub bridge
You'll need INJ for gas fees.
ah ok lemme try faucet
ok. will try this
I tried this too and funny it brought up the new address as the one showing on keplr
just did this now, and it's still the new address that MM brought out. Another thing is; the seed phrase and private key also give different addresses.....I mean, why so distorted🤦♂️
should be use the same private key
seedphrase contains multiple wallet addresses private key doesn't
then connect to the hub and verify it's the same address there https://hub.injective.network/
ok. let me check this
this worked to do the tx, but now I'm having trouble redeeming wormhole tx
not working. the hub doesn't support coin98 wallet either
nope, need to import into one of the supported wallets
like keplr
You just want to recover the NFT from that wallet right?
yes ser😟
it's importing a different address, which is my issue
In that case, can you go to https://injective.talis.art to see if the Coin98 popup appears automatically? If it does then connect with your old wallet and recover your NFT by sending it to another address, if it doesn't then ping me.
ooo wait nvm I found it in my inj hub wallet
Yoo how to make a new coin on inj
Or like a new pair any docs where I can get help from !?
Gotcha thx
Also what about adding liquidity and stuff like !?
Its not in the doc 😦
Search the doc, there are more sections to it.
Also you can forward development related questions to #🚀・dev-support
Aah i see gotcha thx
I think you shld take this to coin98 discord
thx
You're welcome ser 🫡
i havent been able to bridge back my usdc from inj for close to a week now is there any other solution than trying w more inj gas?
Can I get some kind of refund or a diff troubleshooting method as I referred to the tutorials provided?
Im seeing other people unable to bridge back usdt as well, whats the best way to fix all this?
• Failed to send message. Hold for options.
What's the error you're getting?
What wallet are you using? Also can you send your address?
Sent friend request
Please continue here.
inj13vh3lta6aqrvsl4m6mn82sfg8v7y85k26am048
Which wallet are you using?
Having issues receiving the testnet tokens via faucet... my keplr wallet is saying "failed to query response from endpoint." Does any one know how to solve this?
also tried to remove inj testnet and add again, but issue remains
Keplr is using old LCD endpoint, you'll need to change it to the latest one:
https://testnet.sentry.lcd.injective.network
You can do it from Settings -> Advanced -> Change Endpoints -> Select Injective Testnet -> Enter the URL in LCD - Save.
how to deposit from binance to injective hub wallet
great thanks! will directly try
Just enter the Injective hub wallet as the destination wallet when withdrawing and select the network to Injective Network
injective hub wallet is not providing TAG address to deposite as withdrawal from Binance TAG Address
works now, cheers
Memo is only needed when depositing to exchanges
If you're depositing to a non custodial wallet then you don't need tag, you'll only need it when depositing to a CEX, just go ahead with the address alone.
You can send a smaller amount first to confirm if you wish.
ok Lahn Thank you very much
I have a problem guys. i withdraw my injs to binance, binance gave adress and memo. Now i am. Now, i am not about write adress on leap. Can i check memo on block explorer?
What's the TX hash?
no need memo
Memo is only needed when depositing to exchanges
i have bridge from Arbitrum to Inj ARB token is it supported ?
Thanks Lahn
I sent to binance from leap
yes, did you use memo?
I am not sure can i check on explorer?
do you know this address? inj1u2rajhqtptzvu23leheta9yg99k3hazf4waf43
You didn't enter any memo, if you sent binance to leap then it should be fine.
If you entered memo then the memo is visible on the tx on the explorer.
Really 😦
You'll see the Memo on explorer if you entered it.
fund were sent to inj1u2rajhqtptzvu23leheta9yg99k3hazf4waf43
So i cant take?