🆘︲help-and-support-old

[unreal juniper]

ok thanks

[robust snow]

Any info 🤔?

[rocky ether]

if someone staked INJ via metamask with ledger, is there a way to link that address to a Kepler wallet?

[mystic zephyr]

You can link your Metamask with your Keplr but ledger not sure

[rocky ether]

if the address on metamask use ledger, when i link it to Kepler can i have problem?
on Kepler i will need use the ledger with atmos app?

[mystic zephyr]

It's best to do own research

[rocky ether]

can i ask to Kepler forum?

[mystic zephyr]

Yes

[oak compass]

i just bridge my eth using wormhole to inj. And it asked me to convert to bank. I am wonder where is my eth

[mystic zephyr]

On the staking page, on hub

[mystic zephyr]

ETH deposit through wormhole is not supported, I recommend to bridge back

[oak compass]

i click send to bank

where do i get back ?

[mystic zephyr]

You can't convert because is not supported

https://hub.injective.network/bridge bridge them back

[oak compass]

what do i do i get this

[mystic zephyr]

cc @fickle escarp

[oak compass]

nvm i got it lol i lost 50$

[dawn dust]

which wallet to use for inj

[mystic zephyr]

https://blog.injective.com/en/injective-hub-guide/ - There are supported wallets for Injective for ex Metamask, Keplr, Ledger, etc etc

[dawn dust]

so better to use evm wallet that support the evm address too right?

@mystic zephyr do i need a memo ?

[mystic zephyr]

When you transfer to Injective Chain, you don't need memo/tag

When you transfer to CEX then you need memo/tag

[dawn dust]

what are networks parameters for metamask?

[fickle escarp]

You dont need to add Injective to metamask, you just connect to the dapps and sign transactions through it

please check the hub guide https://blog.injective.com/en/injective-hub-guide/

[dawn dust]

wont recognize my coins

[fickle escarp]

Can you give me more details?

[dawn dust]

first used rabby wallet everything was good till in themiddle of signing the sign dissapeared from ledger

[fickle escarp]

Rabby is not a fully supported wallet

Please use one of the supported wallets

[dawn dust]

trying via mm now, but hub wont see the coins when im connected via mm

[fickle escarp]

Normal, its a different wallet address most likely that you are connecting

You need to connect with the same address

Ledger live has support for INJ

[dawn dust]

nvm got it working, i hate mm

thx for the prompt replies bro

[fickle escarp]

Let me know if you encounter any issues

[dawn dust]

yeah im fighting probly have to restart browser

oh so now use ledger straight?

wont work ledg via mm?

[oblique tide]

which wallet do you guys recommend for long term ecosystem plays

[fickle escarp]

It will work, but ledger live supports native also, so its up to you in the end which one of the supported wallets will you use

[dawn dust]

but i sign everthing vian the eth app or cosmos app or theres inj app?

guess via eth app

[fickle escarp]

If you connect with ledger + metamask, its via the ETH app

[dawn dust]

and kepler cosmos? but kepler also when i was adding wanted to add inj on the evm side, oh then i tried to sign with eth app, that wass my mistake

[fickle escarp]

This is a synchronization error, please, give it a few minutes and try again

[strange dragon]

how long do you advise i wait for before trying again?

[fickle escarp]

15-20 minutes in order for the bridge to synchronize

[strange dragon]

okay, thank you. i'll try again later and update you on the outcome

now, it says contract execution failed

[fickle escarp]

Can you send me the transaction hash

[strange dragon]

0xd25bba87c9fe3cbfc76c21204b46951d5c7b022bfa883eb29b52c0f33ef1bfc9

[fickle escarp]

It says that those tokens have already been redeemed

Check in your wallet

https://hub.injective.network/wallet

[strange dragon]

ah, thank you. seen it. how do i convert it to inj?

[fickle escarp]

There is no liquidity on the ARB trading pair, i recommend not swapping it or trading it, better to bridge back to arbitrum

[strange dragon]

oof. bummer. okay, so i can't see arb in my wallet when i try to do that. it seems i have to convert the arb to see it in my wallet, yeah?

[fickle escarp]

You arb is in your wallet as a CW20, dont convert it to bank, as you want to bride back

Is it in your wallet as an CW20?

not bank

[strange dragon]

yes , it's in my wallet as a CW20

[fickle escarp]

Can you try cleaning cookeis and make sure you are connected with the correct wallet address

[strange dragon]

cleared cookies now and it's still the same thing. also, it's the right wallet

[fickle escarp]

Can you go to to the wallet page and convert it

Then check on the bridge again

[strange dragon]

I should convert it to bank?

[fickle escarp]

Yes, I just checked, my arb is Bank and it shows on the bridge page

Yes, click convert

[strange dragon]

just initiated a bridge transaction. i'd have to redeem tokens on arb too, yh?

[fickle escarp]

Yes, correct

[strange dragon]

same time frame to redeem as bridging to inj, yh?

[fickle escarp]

Yes

[strange dragon]

also, i can bridge eth on arbitrum through portal, right? cos it seems only arb can bridged on inj official bridge.

[fickle escarp]

Best to stick to what the hub allows because if you bridge asset that is not meant to be bridge through that particular bridge you would have to then bridge back

[strange dragon]

okay, fair enough. is there enough liquidity for sol?

[fickle escarp]

https://helixapp.com/spot/sol-usdt - here is the sol trading pair

There is liquidity, please double check it

[strange dragon]

alright, thank you

successfully bridged back to arbitrum. thanks for your assistance and timely responses

[spare tinsel]

I bridged from phantom to Inj and my sol doesn’t show

Chose from ‘solana’ to ‘injective’, it also doesn’t show in the history tab

[fickle escarp]

Phantom wallet is not fully supported, please use a wallet that is supported like metamask, keplr etc...
You need to redeem your transaction, you do it through the bridge page on the hub. Keep in mind that you need INJ for gas fees in order to redeem

[spare tinsel]

So in order to redeem, I first have to send some INJ to the wallet from my metamask, and only then I can redeem the initial trx?

[fickle escarp]

yes

[spare tinsel]

Ouch, okay…

What does that error message mean?

[fickle escarp]

That you dont have INJ in your wallet for gas fees

[spare tinsel]

Alright, do I have to send the INJ from the ethereum blockchain on metamask? Or can I use another chain

Like Arbitrum on meta

[fickle escarp]

recommend bridging INJ from ETH bridge only, otherwise you may experience issues and have to bridge back

[spare tinsel]

Okay, thanks

[hazy zephyr]

I'm having trouble redeeming my Wormhole tx sent from arbitrum to injective, says something about not finding the VAA? Just looked up the tx and there are 69 (nice!) L1 confirmations already, should be enough right?

Really hope I didn't mess something up, could anyone have a look maybe?
Tx on ARB: 0x70e5a6cbdd81eac8bbd3b815ee1adf55171e25f2f7d408841c8e0470e4e04045

[fickle escarp]

I just redeemed for you, you should see your ARB in your wallet page

but arb trading pair doesnt have liquidity, i recommend bridging back but you need INJ for gas fees

[hazy zephyr]

That's awesome mate, thank you. What did I do wrong here or was it just a UI bug?
Ah I will look into that then, any recommendations coming from L2 to Injective? What route would you use?

[fickle escarp]

You didnt had INJ in your wallet to redeem

INJ is required for gas fees

[drowsy pike]

the case same like i had now

[crimson carbon]

which inj faucet is working?

[drowsy pike]

but my arb still not show in my wallet

[fickle escarp]

Check on the hub wallet page

https://hub.injective.network/wallet

[inner bay]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[hazy zephyr]

Thanks a lot guys, just found the stakely Faucet which was convenient 😄

[crimson carbon]

okay here i get {"message":"Something happened, please try again later - Error: Error"}

Okay thanks the second link worked

oh no
Transaction was not included in a block before timeout of 60000ms 😮

Now I lack again the fee for paying the redeem.

[fickle escarp]

Can you give me the transaction hash

[crimson carbon]

0x45e57071161e135a18c6e8908b41c12dc9ff1f7835931f3315c4fc16365a4f03

This is my polgon Hash

[trim cave]

I need some help in converting cw20 inj tokens to bank. Its giving me an error message. Who can i contact

When I try to unwrap my cw20 inj tokens on inj hub, it gives me this error message 'dispatch: submessages: Adapter is missing balance to create a new token-factory denom: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '89895'. can anyone help

[fickle escarp]

which token are you trying to convert?

[trim cave]

INJ

[drowsy pike]

bos

[trim cave]

@bronze wind I think you had the same issue, has it been sorted

[fickle escarp]

You cannot do it as its not supported if you bridged it though arb or polygon

You need to bridge it back

[cunning edge]

!welcome

[orchid robin]

Hey Ninja, Welcome to the Official Injective Discord <:ninja:923265703539261521>

Injective is the fastest layer 1 blockchain optimized for Web3 finance applications.

Here are some quick resources to get you started on your journey:

1️⃣ Follow the official Injective social channels: https://linktr.ee/injective
2️⃣ Explore the featured dApps on Injective: https://injective.com/ecosystem
3️⃣ Stake INJ: https://hub.injective.network/staking
4️⃣ Become a Ninja Ambassador to earn rewards: https://injective.xyz/3EuIRsu and join the 🛠｜tasks channel to begin completing short tasks to start leveling up!

5️⃣ Use the following commands to find out more about Injective:

• !links
• !injective
• !staking
• !burn
• !ecosystem
• !ambassador
• !hackathon
• !helix

For any further help or questions, please @Community Manager

Welcome to the future of decentralized finance, powered by Injective.

[trim cave]

I bridged it through eth

[fickle escarp]

INJ is brdige through the ETH bridge

[drowsy pike]

bridge ARB to inj but still showing 0 balance

[fickle escarp]

but you used wormhole bridge which is not supported for INJ

You bridge through the ETH bridge

[drowsy pike]

i used this https://hub.injective.network/bridge

[trim cave]

Do I bridge it back using the same bridge?

[fickle escarp]

Yes

[drowsy pike]

i use injective network bridge ARB token but now still showing 0

[crimson carbon]

okay wait i think i have the same problem... i have wmatic - so i have to bridge back to matic and then bridge to eth and then bridge to inj again?

[trim cave]

why is showing cw20 balance on my wallet then?

[fickle escarp]

You cannot covnert it

to bank in order to use it

and if you manage to convert it may not be the same INJ

[drowsy pike]

please respon

[fickle escarp]

Convert ARB to bank

[drowsy pike]

where can i convert it

please chek dm sir

[crimson carbon]

🤷‍♂️ Is it possible to convert wmatic to bank? I cant pay the gas fee and the wallet wont give me anything 😦

[fickle escarp]

In the wallet page on the hub, you will see convert button next to it

[drowsy pike]

my balance was sent to my inj wallet

[fickle escarp]

Yes

[crimson carbon]

okay, than I have to wait until tomorrow to reclaim gas and then bank it?

[fickle escarp]

up to you, you can also find other ways to get INJ for gas fees

[crimson carbon]

Thank you for your help 🙂

[drowsy pike]

but my arb showing 0

[fickle escarp]

scroll down in balances

[drowsy pike]

still zero

[crimson carbon]

ah one more question... if I bridge from ETH it will automatically be converted to INJ? Then I also could change my wmatic to INJ?

[fickle escarp]

Did you redeemed it?

[fickle escarp]

Nope, you need to manually trade it

[crimson carbon]

So only way to get INJ on INJ initially is a faucet?

[fickle escarp]

There are many exchanges that support native INJ deposit and withdrawals

[crimson carbon]

Ah okay buy on binance and send it

[crimson carbon]

Puh now I want to send from a CEX... It says perhaps I need a "Memo" - do I need this?

[drowsy pike]

Thanks bos i was redeemed and 👌

[fickle escarp]

Not when you withdraw to your own personal wallet address

Only when depositing to cexes

[crimson carbon]

Thanks!

[hazy zephyr]

I have been trying for two weeks to understand why I cannot see my transfers into Injective

When connecting, I see a bunch of address from my Ledger but I always select my ETH account (the only one I have):
0x8541dB9e1Eb530569c6c2FC0d05690DeD965B84c

The only thing I see is INJ from years ago.

These two contracts do not appear on my INJ wallet 😦
https://etherscan.io/tx/0x00abfe0df1aa45a60aa4e421626df88a8311cd5e10d94c9946aa2289b6d3a2bb
https://etherscan.io/tx/0x34b611d9c75197c4c3de9d2a5af50ea211d8feb580150170e13f9e11d6a90c2c

[fickle escarp]

Those are not injective transactions,

This is a scam website

[cunning edge]

it seem to be a scam site

[hazy zephyr]

I'll research further, thanks.

[zenith python]

@fickle escarp thanks for reaching out

I initiated a wormhole bridge transaction from SOL to INJ but am having trouble with "Claim Wormhole Tx". I bridged with this method last night successfully, but now running into the following error.

[lime sun]

Please send the error message you're getting.

[fickle escarp]

Which wallet are you using?

[zenith python]

Contract execution failed

failed to execute message; message index: 1: Overflow: Cannot Sub with 0 and 330000000: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '268331'

[fickle escarp]

You need more INJ for gas fees

[zenith python]

oh i know what it is, sorry. i accidentally connected with metamask instead of keplr and have no INJ there for gas. sorry to bother.

[lime sun]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[fickle escarp]

Let me know if you encounter any issues

[golden saddle]

noobie here...I used wormhole to bridge INJ from BSC to INJ. The transaction went through, but I received INJ CW20. Could anyone please tell me how I can convert this to "normal" INJ?

[fickle escarp]

I recommend bridging back to BSC as it is not supported through wormhole bridge

[golden saddle]

Ah I see...thank you!

[zenith python]

how can I send some INJ to my metamask to cover gas fees? sending to the INJ address doesn't seem to be the solve

[shell flint]

I'm trying the same, but can't transfer. I only see a small balance of Kuji on Injective. But the INJ balance doesn't show to transfer.

[fickle escarp]

there is no bsc bridge, you must get it on ETH and then you will be able to bridge to Injective and use it to stake

You can test wormhole for BSC to ETH

Try with small amount

[pliant sable]

I just bridged some solana from sol to inj. I can see the tokens in my wallet as wrapped sol but I can't seem to unwrap it with helix? Is there any other ways to do so?

[fickle escarp]

You can convert the SOL from CW20 to Bank through the hub wallet page https://hub.injective.network/wallet

[pliant sable]

worked perfectly thank you so much

[fickle escarp]

What do you mean by ETH network back online?

ah, yes, better go for ETH and then you can bridge to native injective through the ETH bridge which you can see here https://hub.injective.network/bridge

Also please check the hub guide for more information - https://blog.injective.com/injective-hub-guide/

Can you ask this in #💬・general and the community will answer it

[zenith python]

how can I send some INJ to my metamask to cover gas fees? sending to the INJ address doesn't seem to show in the balance

[regal thorn]

I have quite some INJ and want to stake it. I Just transfered INJ from Binance to the Injective hub. The wallet on the website shows how much INJ I have available. When I go to Staking on the website and try to delegate, an error message says that no wallet is conected.
can someone help me here please?

[fickle escarp]

how come, can you give me more details?

[fickle escarp]

can you re-connect and which wallet are you using

[zenith python]

I have some INJ in Keplr - sent a small amount to the INJ address associated with my metamask (if that makes sense), but doesn't show up in balance (on ETH mainnet)

[regal thorn]

so yesterday I connected metamask to injective hub. transfered 130 INJ and it showed up on the website's wallet.
now I disconnected and wanted to connect again, worked. but the INJ's are not showing up. howcome? wallet says 0

[fickle escarp]

You can only see it on the hub wallet page if you connect with metamask to the hub

[fickle escarp]

make sure that you are connecting with the correct wallet address

[zenith python]

Generic error: VaaAlreadyExecuted: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '231725'

how much INJ do i need here for gas?

i see that i do have .02 available

[regal thorn]

I know from my binance transfer the address I sent it to. but how do I get to this address? it's not in my metamask

[fickle escarp]

make sure that you are connected with the same wallet to sign

[tawdry pilot]

I have some INJ in ERC20 I swapped on Uniswap, that I want to bridge and stake.
I created a new wallet on Injective hub using my ledger, which gave me an INJ address and an ERC20 address.
I sent the INJ to that ERC20 address, along with some ETH for gas.

When I try to bridge, it asks to 'Set Allowance". So I click that, but that's were the party seems to end. Nothing happens except an error message.

Am I missing something?

[fickle escarp]

hey please check this video guide https://youtu.be/SspkXnldqHc?si=s5MGCQr5yIv462BU

[zenith python]

I am - it prompts me with a metamask transaction that I can sign then gives that error

[fickle escarp]

what are you trying to do

[zenith python]

trying to Claim Wormhole Tx

[fickle escarp]

isnt it already claimed?

[zenith python]

No I haven't been able to claim it, that's why I contacted support

[fickle escarp]

Give me the transaction hash

[zenith python]

5Wr3NtYRjUp22qxjs6Eb91dYm5R81aRpGZL7S9F7XUajUBCyR5jVUZryHgP65p8Euydaji7z9Z995w7W3UFbGtpz

[fickle escarp]

Which asset did you bridged?

[zenith python]

SOL to INJ

[fickle escarp]

Those tokens are already redeemed

You have solana in your wallet

https://explorer.injective.network/account/inj199jdv9lav2v55egs9jpdm6p2u3kh2qllz7htaj/

[zenith python]

wow so sorry

[regal thorn]

@fickle escarp is it possible to send you a dm or you prefer here in the chat?

[zenith python]

totally forgot SOL is supported on Injective and that I need to swap LOL. Thank you!

[fickle escarp]

I have too many DMs

i prefer here in chat

[regal thorn]

I can understand 🙂

[zenith python]

last question - how can I send INJ from my metamask wallet to my keplr wallet?

[regal thorn]

so my problem: yesterday I got onto inj hub, connected my metamask and transfered xx INJ to the wallet which was shown above in the top right corner.
today a different wallet is connected. when I disconnect and reconnect I can't access that wallet again. howcome? I found the transfer and everything

[fickle escarp]

On injective blockchain?

[zenith python]

yes

i see - on wallet in hub

[coral cargo]

Guys how do i stake INJ can someone help me

[signal badge]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[coral cargo]

@signal badge which link is the one to stake INJ

[regal thorn]

everytime I disconect and connect again with metamask on injective hub there's a new address in the top right corner.

[fickle escarp]

are you connecting with ledger + metamask?

[regal thorn]

no just metamask

I connected the INJ hub with metamask for the first time yesterday

i have the transaction details of course

[fickle escarp]

That should not be happening, do you have more than 1 wallet address in metamask?

[fickle escarp]

do you have other wallets installed on the browser?

[regal thorn]

yes that as well.

strangest thing. suddenly it just connected with the right wallet address again. wtf

how can I 'safe' them now? from the metamask to kepl?

[fickle escarp]

Maybe the hub is confusing with the other wallets

Can you try installing a clean browser and try through it with only 1 wallet installed, like metamask

see in which one your funds are

[regal thorn]

ok thanks. if I open metamask now the funds are not visible though

also the wallet from the inj hub (top right corner) is not visible in metamask

[fickle escarp]

In order to see your INJ address and the funds in it you need to connect to the hub

Please check the hub guide just in case https://blog.injective.com/injective-hub-guide/

[regal thorn]

just checked the guide. I've done everything right.
I can see the funds on my wallet on the INJ hub

but the wallet adress from the top right corner is not visible in my metamask wallet

scary stuff it is. I just transferred back all my INJ to binance for the time beeing. whats the best guide out there for how to stake? 🙂

[kind sentinel]

Has the issue with ledger and the inj bridge been resolved yet?

[limber widget]

I just got in the INJ eco, and I am trying to fund my Keplr wallet. Tried sending funds from SOL to INJ. The faucet gave me 0.01 INJ but it is not enough. I have bought INJ from coinbase but they dont support sending to Keplr wallet. Feeling completely lost what to do next. Can I get more form the faucet?

Im trying to claim a wormhole tx in the inj hub but I have not enough inj for gas basicaly

[fickle escarp]

You cannot see it in metamask directly as you cannot add Injective chain to metamask, you need to connect to the hub or other dapps in order to see it

[fickle escarp]

It will be solved in the coing chain update

[fickle escarp]

Coinbase doesnt support native injective deposit and withdrawals

[limber widget]

Yeha I have figured that out

[fickle escarp]

You can bridge that INJ from ETH to Injective through the hub bridge page. Or use exchange that has native support for Injective to withdraw directly to your INJ address

[kind sentinel]

Thanks - any idea in timing?

[fickle escarp]

I have no ETA on it, but it should be very soon

[kind sentinel]

ok thanks

[limber widget]

How much INJ is required to claim wormhole tx??

[lime sun]

Very small amount, faucets should be enough.

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[fickle escarp]

a little bit more than what the faucet provides

[limber widget]

Well thats funny

[fickle escarp]

DM me the INJ address and I will send enough for a few transactions

[limber widget]

open dms ill send it to you, thanks

[fickle escarp]

They are open

[limber widget]

Yeah I had dms turned off, my bad,

[full sky]

Has anyone tried bridging usdc from eth on the inj hub bridge?

[wet falcon]

i just bought some injective to send to my kelpr wallet and when i go to send from metamask it says the address is invalid

[fickle escarp]

On which blockchain do you have your INJ?

[wet falcon]

eth

[fickle escarp]

You need to bridge it, not send it directly. Check the hub guide

https://blog.injective.com/en/injective-hub-guide/

[full sky]

Sir. I bridged usdc to inj but now showing up in my leap wallet. Any help would be greatly appreciated.

[fickle escarp]

What is the issue

[lime sun]

If I'm not wrong then you need to claim your Wormhole Tx.

Go to https://hub.injective.network/bridge and click Claim wormhole TX.

[full sky]

It shows that it’s on inj but I don’t see it in my leap wallet. Also can’t bridge back

[fickle escarp]

Check in the hub wallet page https://hub.injective.network/wallet

[full sky]

I see the balance in there but not in my leap. And when I try to bridge back it’s telling me I don’t have enough inj. I have a lot

Oh. Nvmnd. I see what the problem is. Thank you both @lime sun @fickle escarp 🫡

[stiff jacinth]

I used Injective Bridge to transfer 1 SOL from Solana ecosystem to Injective ecosystem, but I did not receive that SOL in my INJ wallet.

Then after talking to Stefan, community manager, I used https://portalbridge.com/advanced-tools/#/redeem to redeem my tokens. He told me to click recover and I should be fine and see them one the hub. But I still did not receive my tokens.

He tried to redeem the tokens for me but no result.. Then I contacted Wormhole support. They examined the situation and said that the situation is weird because the tokens, 1 SOL, in in another wallet which is not mine. And they told me to contact Injective support.

Please help me.

SOL tx: 4tQGLQSzwf9oyeoeeZgW2rxMBY1zMX4K8DGKCphoY35yD3mmfajeJiXCwm7JgoZYse89YTCaYEzGjfSw8TWCiwhf

[fickle escarp]

Those tokens are already redeemed

Check your wallet on the hub wallet page

https://hub.injective.network/wallet

[stiff jacinth]

I did. It's not there

[fickle escarp]

You need to connect with the correct wallet address in order to see them

[stiff jacinth]

I only have 1 wallet and it is inj1mmshhaz07mjprp0vpsaycmrcdhh0gxrw5us2ef

[limber widget]

im trying to deposit in black panther vault using a ledger and am getting this

swapping on helix produces this error

[stiff jacinth]

I dont have any other wallet. I bridged with this wallet. Why is my SOL in inj1zlxtgdlr4qtszg5gm28t0lv29fsw2h99vdkyrd?

[fickle escarp]

With which wallet did you connected?

The funds are in the wallet to which you may have connected to do the bridge transfer

[stiff jacinth]

this one. as this is my only wallet

[sudden glade]

i tried Injective Bridge to bridge fund from sol to injective
but still i can't claim, can you help me ser?

[fickle escarp]

You need INj for gas to redeem on Injective from solana

[sudden glade]

there should be a history here right?

[fickle escarp]

Once you redeem, yes

[sudden glade]

once i have the $inj for the fees, where can i claim?

is there any tutor to do that?

[hazy zephyr]

I once had it sent to my (virtual) metamask injective address. It's an address thats different from your EVM address and only shows when you connect your Metamask wallet to the Injective hub for instance. You might want to check if this is the case for you 😉

I was confused as well since I didn't know this would happen

[stiff jacinth]

I connected to INJ with my SOL wallet but still did not see anything. It is obviously on inj1zlxtgdlr4qtszg5gm28t0lv29fsw2h99vdkyrd and I dont know why

[limber widget]

Looks like INJ has no LEDGER support

[hazy zephyr]

That's not something I've encountered before, I'm afraid I don't know what to do in your case, thought it might be something similar to what happened to me but this is different.. hope you'll get your funds back with some help mate

[fickle escarp]

Ledger live has native support for INJ and edger is a supported wallet on injective

[limber widget]

Please look at the errors I posted earlier in chat

[fickle escarp]

Just import the sol wallet to keplr with the private key and you will see them as you most likely have bridged to that adddress

[limber widget]

I think I may have figured it out, I ant use keplr, just have to connect direct to ledger live.

[stiff jacinth]

How am I going to impor the sol wallet to Keplr?

[fickle escarp]

You take the private key and import it directly

[stiff jacinth]

and no, I did not use that address. As I said, I only have 1 address and this is that

[stiff jacinth]

that doesn't work

[fickle escarp]

The problem is that when you bridged your wallet that you used to bridge from sol has sent the funds to that wallet INJ address

[stiff jacinth]

I dont know why you dont want to believe me but I am pretty sure that I bridged SOL with inj1mmshhaz07mjprp0vpsaycmrcdhh0gxrw5us2ef

[stiff jacinth]

when I click "view on explorer", it directs to this link

[fickle escarp]

You have bridged to this wallet address - https://explorer.injective.network/account/inj1zlxtgdlr4qtszg5gm28t0lv29fsw2h99vdkyrd/

[fickle escarp]

this is the token address

You need target address

Which wallet are you using, Phantom?

[stiff jacinth]

yes

[wet falcon]

ok so i got my inj from eth in my kelpar wallet, now when i go to claim my solana txns it says i need to be using metamask?

[fickle escarp]

You need to import that wallet to keplr or to metask, whichever works, then connect to the hub and you will see your SOL

[wet falcon]

let me try that

[fickle escarp]

no no

this is for the user above

[fickle escarp]

Keplr is a supported wallet, you can redeem/claim with it

[stiff jacinth]

I will brb and try

[wet falcon]

got it now thank you

[fringe tinsel]

I sent SOL through the Injective bridge, but somehow i can't even find the hash to finish the wormhole claiming.

[grave inlet]

Same issue for me!

[fringe tinsel]

i have th solana tx too, but can't continue forward now

[fickle escarp]

You take the transaction hash from SOL

Then you need to have INJ for gas fees in order to redeem on injective side

[fringe tinsel]

But if i don't have INJ for the gas fees on the platform, than how can i even transfer INJ in the first place, to have money for the fee's. Its a circle

[grave inlet]

Ok I got it

[fickle escarp]

There are exchagnes that have support for native Injective withdrawals which you can use

you can also use the faucets

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[grave inlet]

if you have any tokens in your kepler wallet you can get some inj... I had some tia still

[grave inlet]

Man, now that I have some SOL in my wallet how can I swap them to inj?

[fickle escarp]

You can check the exchange dapps for trading pairs
For example here is the trading pair for SOL: https://helixapp.com/spot/sol-usdt

[fringe tinsel]

So i have my INJ for the gas fees, I can find my SOL tx through the solscan website. i just paste it to the wormhole box, and hopefully can redeem the money i sent originally?

[fickle escarp]

Yes, after you redeem it, you will see your SOL in the wallet on injective blockchain.

Then you convert it to bank and you can trade it

You do it through the hub wallet page https://hub.injective.network/wallet

[rain echo]

staked via injective hub with talis and black panther validators so may be getting an airdrop or two. My question is - I used metamask to connect to inj hub, Inj wallet was auto generated and then bridged eth inj to native inj. Then staked. Will any airdropped tokens show up under wallet?

[fickle escarp]

You mean if there is an airdrop?

[rain echo]

yes

[fickle escarp]

All of the requirements and how airdrops are executed will depend on the dapps that are doing it. Each dapp can have different requirements for their airdrop.

The overall answer is, yes, but as i mentioned above different dapps = different requirements for their future potential airdrops

[rain echo]

ok thanks. so they will show up on the hub?

[fickle escarp]

If they get airdropped on injective blockchain - yes

[rain echo]

Thank you

Was just trying to work out in the event of getting some would they show up on the hub. Answered my question. Appreciate it

[fringe tinsel]

usually how many minutes/seconds do take to redeem the tx? Its loading for me suspiciously long

[fickle escarp]

It takes a few seconds

You will see your SOL on the hub wallet page

https://hub.injective.network/wallet

[fringe tinsel]

And maybe a stupid question, since i sent SOL, i should pick SOLANA as the origin network right? Because I tried it that way, and couldnt redeem the SOL's, and i know i have enough for the gas fees too

[fickle escarp]

Yes, correct

Give me the transaction hash

I will redeem for you if you are experiencing troubles

[fringe tinsel]

Should i send here or DM?

[fickle escarp]

You can send it here

[fringe tinsel]

4Z4FQqa5o4Py1uuitpb7Ho8tFbJnAd9TyRYmnqwcpozqvhC1ZXkVktRC2H28nj6XkpHTPpJ3EYaZQgpKLZQgWCWM

[fickle escarp]

Those tokens are already redeemed

They are in your INJ wallet - https://explorer.injective.network/account/inj19xl8ftxwwv7294plh9d4gf6klpcjgkck5leny3/

You bridged a very tiny amount of sol? right?

[fringe tinsel]

around 50$

[fickle escarp]

are you sure about this, the transaction hash that you sent me shows that the amount bridge is very tiny

[fringe tinsel]

O wait a second please, my bad

So, i sending now the correct one, and sorry for the other:
5G9WhFz2H9G7iPTi5ri36DoEugDNAmK3Hhhftvi6e5xyEXV9j3AStygurJV7XEVjNv9vuEcRftSsyjvFCPa6Moa8

[spark thunder]

, I have some INJ on osmosis. I would like to stake it. When I connect to the injective hub and want to connect kepler, I get the following error "No Ethereum public key. Initialize Ethereum app on Ledger by selecting the chain in the extension". Can't Kepler connect and transfer my inj tokens from Osmosis? Thanks

[fickle escarp]

Op just redeemed for you, check your wallet

[fringe tinsel]

Thank you man!

[fickle escarp]

Yes, you need to do intialize the ETH app in order to sign on injective. But there is an issue with Ledger IBC bridge transfers on injective at the moment and you cannot bridge, it will give you error.

It will be fixed in the next chain update which is coming very soon.
In the same time if you want you can send your coins to a hot keplr wallet and bridge from there

[fringe tinsel]

I hope I am not that annoying yet, but since i need to convert it from CW to Bank mode, it show's the same error, (missing or invalid parameters) what next

[regal thorn]

I'm setup with everything and wanted to test the testnet. unfortunately i can't connect to my keplr wallet when using temp.exotic.markets. I always get the error message: Failed to connect Keplr.
what to do?

[unborn crag]

hi! I have the same problem as @fringe tinsel i cant reedem my sol, can i ask you to reedem it for me?

[fickle escarp]

With which wallet are you connected to the hub?

[fickle escarp]

Do you have the injective testnet added to keplr?

[fickle escarp]

give me the transaction hash here

[fringe tinsel]

Phantom Solana wallet

[unborn crag]

4euarKGM9TLFHKcV6oa8PbbfyHZcTqyqoQViKYaAXjLeHKs7fPFGaMBoLVdPJrLX17RNCBqBx941TJwirpPoZZMW

[fickle escarp]

Phantom is not supported wallet thus why you are experiencing issues. You need to use on of the supported wallets to do it. Like metamask, keplr or leap etc..

[regal thorn]

you mean with this link right? https://testnet.faucet.injective.network/

if so, yes

[fickle escarp]

Done check the hub wallet page

[fickle escarp]

No no, the injective testnet to keplr wallet? Add injective testnet to keplr: https://chains.keplr.app/

[fringe tinsel]

Hm, okey, but i don't know why did it offer to connect that wallet, if its not even supported, probably it will solve a lot of my issues connecting other suported wallets.

[unborn crag]

thank you!

[fickle escarp]

Its only for the bridge transfer, but its not supported on the hub or dapps, I will notify team as you are not the only one today that has this issue.

Now if you want to not have any issues you need to improt your Phantom wallet to one of the supported wallets be it keplr, leap or metamask whichever works for you

[unborn crag]

and on the keplr or leap wallet what kind of coin do i need to have for the fees?

[fickle escarp]

For Injective blockchain - gas fees are paid in INJ

[stiff jacinth]

I imported my Phantom wallet with private key to Keplr, and connected to the hub. It have my a brand new INJ wallet and I still cant see SOL

I am very very confused

[fickle escarp]

Make sure to get the correct derivation path

Its a little bit tricky with wallets

[Please check this https://help.phantom.app/hc/en-us/articles/12988493966227-What-derivation-paths-does-Phantom-wallet-support-

[stiff jacinth]

what is a "derivation path" ?

[fickle escarp]

The way your public address is derived basically

[willow raven]

I I am in dire need of help, back in April I bought injective on the Binance app, since then Binance in Canada has become unusable but I bought a ledger key just before Binance closed so I have my injective on my ledger key the problem is that my injective protocol are currently only able to be traded on the bnb smart chain which is a problem because if I want to stake them I am not able can anyone help me and show me how put them on the injective chain ?

[fickle escarp]

You can try to bridge BSC to ETH through wormhole (test with a small amount first to make sure its working) then if successfull you can bridge ERC-20 INJ to Native INJ through the hub bridge page - check the hub guide for this example https://blog.injective.com/en/injective-hub-guide/

[willow raven]

Where can I find the wormhole you are talking about ?

[fickle escarp]

https://portalbridge.com/#/transfer

[willow raven]

I’ll try that thank you

[stiff jacinth]

And how I do make sure to get the correct derivation path? I dont have that info.

[stiff jacinth]

and I did not understand anything from this

[strong bobcat]

Better to import your private key on keplr to make sure it's the same as phantoms

I see you did that so that's good

Please clean cookies and reconnect again

[stiff jacinth]

but it gave my brand new INJ address as I said

you think SOL would be sent to this wallet?

[reef widget]

Initiated 2 transcations via hub bridge from SOL to INJ . It's not in "In progress" and I can't claim them, it just says "Missing or invalid parameters".

[strong bobcat]

Nope, would need to bridge, your sol is on solana network, need to bridge over to Injective’s

[strong bobcat]

Hi Marsh, how long has it been since you did the bridge?

[reef widget]

One hour

mM8kvHHXEmrRJYH7MsJaUgRXfj6yrffKqAoZz64VaAeXDGi2zmXx7Wmw7jtMaBxrFnSbpL6BWsr2Xj5dHapgEoc

3suzxyJFQEidAM9E91KTarBJPSun7B9QimhtAvKcx3ef6aAkSVfWwPXLBn7Nt4HuV2UvNjmiv1W5vpSZQKxLNM2a

[strong bobcat]

Do you hold any INJ for gas fees?

[willow raven]

Is there another option where it does not cost as much to bridge ?

[reef widget]

I got INJ from a faucet (0.02$)(after I initiated the 2 transactions). Before I got INJ, I had this error:

I bridged from SOL to the Injective network web-wallet

[strong bobcat]

It's the network fees, not us

[strong bobcat]

Send me your INJ address on dms

[stiff jacinth]

I bridged with this new wallet and it doesnt work. And I dont think my sol is on solana network as it is on this wallet: inj1zlxtgdlr4qtszg5gm28t0lv29fsw2h99vdkyrd

is this a wallet on solana network?

[strong bobcat]

Oh sorry, yes it's on INJ

Go to the wallet section, need to convert it to bank

[reef widget]

sent

[stiff jacinth]

Look. It is not on this wallet either. I used phantom wallets private keys to import sol wallet on keplr, and it give me brand new wallet. this wallet does not have something convert it to bank

I seriously need help on this. I need to sleep now.

[light yarrow]

just bridged some assets to Keplr a few hours ago and nothing happened

[strong bobcat]

I'm not sure what you are trying to do, Seranium went to rest and I took over. Would you please explain me on DM’s so I can help you?

[strong bobcat]

Need to claim the txid on the hub

[light yarrow]

recover?

[willow raven]

I I am in dire need of help, back in April I bought injective on the Binance app, since then Binance in Canada has become unusable but I bought a ledger key just before Binance closed so I have my injective on my ledger key the problem is that my injective protocol are currently only able to be traded on the bnb smart chain which is a problem because if I want to stake them I am not able can anyone help me and show me how put them on the injective chain ? I have tried swapping them using the portal website however there is no option to swap from bnb to etherum from metamask

[strong bobcat]

Please claim on the hub with the txid https://hub.injective.network/bridge

[stiff jacinth]

I will. I do think that the devs need to this issue, as Stefan complied with me

[strong bobcat]

Only Binance supports bep20 version afaik, no other way afaik

[willow raven]

What does afaik mean?

[stiff jacinth]

as far as i know

[stiff jacinth]

added as a friend to message you

[strong bobcat]

As far as I know

[light yarrow]

Thanks man, do you know where to find the txid on solscan? https://solscan.io/tx/35ztedaQqyTwcHGPwbatKEgDPFLCUhFK1ugo5NrHQ9kJLy52h6ypASErRLXD8eYM2sXGGug7KQh9zaA5rZWnMRAB

[deep rapids]

When I attempt to connect to Keplr through Injective I get the following error: No Ethereum public key. Initialize Ethereum app on Ledger by selecting the chain in the extension Can anyone explain what I'm doing wrong, please?

[strong bobcat]

Yea, the one called signature

35ztedaQqyTwcHGPwbatKEgDPFLCUhFK1ugo5NrHQ9kJLy52h6ypASErRLXD8eYM2sXGGug7KQh9zaA5rZWnMRAB

Make sure to have some INJ for gas fees

[strong bobcat]

select Injective on the Keplr wallet and it’ll trigger to open the Ethereum app and initialise the pub key

[deep rapids]

Thanks. It is working now

[light yarrow]

Legend thanks so much

[rain mirage]

I tried bridging from ARB and the funds seem lost. The transaction went through, but when I paste it into the redeem page it says it can't find my VAA

@strong bobcat

[strong bobcat]

Do you hold any INJ for gas fees?

[rain mirage]

No I don't. But I should at least be able to find the transaction to TRY and claim it right?

Here is the confirmed transaction, but it doesn't seem to show up in the native bridge even when i put in the transaction hash https://arbiscan.io/tx/0xb59e38d4de9d18702fe2615b230e3815e1c49b8a7df8bf8df866550b0236af80

[strong bobcat]

Nope, need INJ for gas fees and claim

Try the faucets

[runic pivot]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[rain mirage]

okay, now I have gas fees, but it still isn't showing up on the claim page. It doesn't even sayin progress, its just blank

[strong bobcat]

Clean cookies, refresh and try again

[rain mirage]

still nothing...

nothing shows up in the history. and when I try to input the transaction hash it says "Could not get the signed VAA. Is the transaction confirmed?"

[strong bobcat]

that error usually pop ups when there's you don't hold enough INJ

please send me your wallet address on DM's

[rain mirage]

done

[stone plinth]

I have similar issues

I bridged Solana from phantom to injective (leap wallet)
I have been trying yo redeem on injective but to no avail

@strong bobcat

[strong bobcat]

need some INj for gas fees

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[strong bobcat]

then can claim

[charred imp]

I bridged ARB from arbitrum to injective (on injective hub) but nothing showed up. The TX on arbi scan is processed

no tx in my inj wallet on injective explorer

[strong bobcat]

need to claim the txid on the hub, make sure to have some INJ for gas fees

check the links shared above

[rain mirage]

@strong bobcat trying to send the ARB back now and it tells me to use a faucet. i did and it still wont let me send my ARB back to Arbitrum

[charred imp]

where on the hub to claim the TX iD?

I already claimed inj from facet

Found it!

[rain mirage]

@strong bobcat helped me to get the ARB into injective, but you can't convert it to INJ apparently, you need to bridge itback to arb, but you wont have the gass to do that either 😦

[charred imp]

oh no! so its telling me its missing some info. not pulling donw the ARB. Is there not a DEX on INjective to trade on?

[rain mirage]

that was my question too. @strong bobcat said there was no liquidity for ARB

[charred imp]

ok, got the arb down now. at least got a wormhole tx on the books! lol

[rain mirage]

lol

[strong bobcat]

yes, no liquidity on ARB

currently

[charred imp]

Mexc not allowing withdrawals on Injective chain currently, so can't even send INJ from CEX

[rain mirage]

but i transfered a bunch trying to stake it as INJ and now i can't get it out. @strong bobcat why does it keep telling me to go to a faucet when I have already done so? i just want to recover this arb to arbitrum

[strong bobcat]

Binance does

[strong bobcat]

will answer your dm

[charred imp]

you can't bridge back

Maybe you can bridge it to Kujira or something? check where theres liquidity

[rain mirage]

i was able to bridge it back. just needed more gas

[stone plinth]

bro I have like $3 worth of inj

[strong bobcat]

please clean cache, and try to claim again

[stone plinth]

ok

[willow raven]

I have tried to use portal to change my inj and when I did the transfer the portal app told me that my inj wallet was not found

But I have this wallet open on the inj website with the exact same address is there anything I can do ?

[stone plinth]

same issues bro

I still can't claim
it says contract execution failed

[crude wasp]

You need to send some funds on that address. You can use https://inj.supply to get some small amount of INJ

[strong bobcat]

what's the txid?

[eternal patio]

Ive bridged solana to inj, i am wondering is there any dex which supports sol? That i can trade sol to inj or usdt?

[strong bobcat]

!helix

[orchid robin]

About Helix 🧬

Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).

💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf

[eternal patio]

Cant find sol there

[strong bobcat]

https://helixapp.com/spot/sol-usdt

[stone plinth]

5JZBrLa5yJB2pZ1YgzkyRmWupDUuqne8Uo9Fi6aWUFDVonKpftDwjpxTH28Y3goozMz2R3PJfbBTBRz7YhCwWUuj

[minor warren]

i bridged in $arb from arbitrum to inj where can i redeem?

[crude wasp]

https://hub.injective.network/bridge you can find the "Claim Wormhole Tx" button on the Bridge page

[strong bobcat]

make sure to have some INJ for gas fees

[minor warren]

getting an rpc error, assuming this is why cause i dont have any inj

[strong bobcat]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[minor warren]

is there a dex where i can swap this arb into inj?

[strong bobcat]

are you connected to the right INJ address when trying to claim?

[strong bobcat]

not really

[stone plinth]

yes

[strong bobcat]

what error did you get when trying to claim?

[rapid meteor]

I have bep-20 INJ tokens. Is there a way to bridge them to native INJ?

[willow raven]

If I have cw20 inj on my injective wallet how can I turn them into native injective ?

[crude wasp]

Go to the Hub, click on the Wallet page and on the Balances list you can click on Convert.

[willow raven]

I have click but it seems to do nothing is it long ?

Wait it gave me an error message it says: adapter is missing balance to create a new token factory denom

What do I need to do ?

[strong bobcat]

nope, only way is thru Binance

[rapid meteor]

Thanks, looked like that might be the case 👍

[crude wasp]

okay, give me few mins

can you try now? @willow raven

[stone plinth]

bro any way to help me

[crude wasp]

It's strange tho that you are required to create a new denom on Injective, which asset have you transferred in?

[crude wasp]

Transfer them on the Binance exchange and then withdraw them nativelly to Injective through the exchange or convert them to ERC20 and then bridge them in to Injective using the Hub's bridge page.

[strong bobcat]

please go to https://hub.injective.network/bridge, clean cache connect your leap wallet and try to claim, let me know you get any errors

[willow raven]

I transferred in injective but from a portal transfer now I just looked and it sucesfulky converted but it’s not native injective it’s called factory/inj

[crude wasp]

Where did you transferred INJ from?

[willow raven]

Metamask but it was an objective token on the bsc chain which is why I had to pass it thru the wormhole

[crude wasp]

Whats the asset?

You can’t represent it like that on Injective, now You should convert back to CW20 and bridge out from the portal bridge.

Even tho BSC chain is supported on Wormhole, the INJ transferred in from that network through Wormhole cannot be used on Injective

[willow raven]

Then please tell me how can I transfer them and make them be native inj

[crude wasp]

From Binance exchange through their Withdrawal process by selecting Injective as withdrawal network, OR if you have them as ERC20 through the Bridge on Hub’s bridge page (using Ethereum as the origin network)

[rapid meteor]

Will do. Thanks

[willow raven]

How can I make them erc20

Because I cannot use Binance in Canada except if you tell me that a vpn can solve that problem

[strong bobcat]

there's not another way to do it sadly

only thru binance (as far as I know)

[willow raven]

With a VPN is it possible to pass the ban on Canada ?

[loud fossil]

I've bridge 20 Arbitrum tokens to INJ using HUB, but now I don't know how to find that tokens, I don't see it on my wallet

[quasi veldt]

I've bridge 399 WMATIC tokens to INJ using HUB, but now I don't know how to find that tokens, I don't see it on my wallet, the hash is 0xd00559e72b92e0ba55a16fb900d971119c28535f2d185b112604476b4f6368f9

[strong bobcat]

need to claim on the hub https://hub.injective.network/bridge

[strong bobcat]

need to also claim on the hub, read the message above

will also need INJ for gas fees

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[loud fossil]

it says "Could not get the signed VAA. Is the transaction confirmed?"

the transaction already is confirmed on Arbitrum

[strong bobcat]

means you need some INJ for the transaction fee

check the faucets above

[loud fossil]

is that possible to connect to INJ network with metamask? I though I had connected with Keplr, but it shows like it was with metamask

[strong bobcat]

can connect to the hub with metamask and use it to sign transactions on Injective network, we support it

but cannot add the chain to metamask

[abstract delta]

You can see the Metamask Icon

[willow raven]

Is it possible to use Bianca in Canada using a vpn

[loud fossil]

I click on metamask icon but nothing happens

[willow raven]

Binance *

[strong bobcat]

what do you want to do?

[abstract delta]

You are already connected with your metamask wallet

[loud fossil]

claim those ARB tokens bridged to INJ

[strong bobcat]

you are connected, now need to claim the faucet to claim the tokens from the bridge

[abstract delta]

I'm sorry we can't help you with that.

[sullen ore]

i bridge funds from solana(phantom) to injective using injective hub, i redeem through "claim wormhole tx" but i am yet to see my bridged funds

[strong bobcat]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[loud fossil]

but how to access that wallet? I don't see that INJ wallet address on my metamask, I don't see any INJ network on metamask

[strong bobcat]

need inj tokens for gas fees @sullen ore

[strong bobcat]

go to the wallet section on the hub

that's how you access your INJ address with Metamask

[long scaffold]

Admin, can check witb you. I have inj at mexc exchange. How do i transfer to keplr wallet

[loud fossil]

I don't see any ERC20 balance there. Also I already asked for faucet but seems that I didn't receive, also I can not claim anything.

[strong bobcat]

do they support INJ network?

[strong bobcat]

send me your INJ address on dms

[loud fossil]

it is weird that although I made the bridge txn, there is no transaction on my history

[loud fossil]

I sent a friend request

[long scaffold]

I saw only can transfer through bnb chain. What does it mean

[strong bobcat]

would have to find another exchange that supports both bnb and Inj network

like Binance

so you can deposit as bnb chain and withdraw as Injective

[stone plinth]

can I dm you?

[strong bobcat]

yes please

[long scaffold]

Then how do i able to transfer out from mexc for inj?

As i have some at there

[willow raven]

I am in Canada and I have a problem regarding my injective token, they are now on the bsc blockchain and I want to transfer them to the injective chain the problem is I do not have access to Binance since I am in Canada please what can I do ? I’m desperate🙏

[strong bobcat]

gabfiel, sadly, we cannot give advice on what to do with your tokens, we try to give you solutions, after that, you have to take actions yourself

currently only Binance and Mexc support INJ bep20

have to find your way

[willow raven]

If I manage to get them on the erc20 chain can I use the hub to change ?

[loud fossil]

@strong bobcat sir, a friend of mine is having the same problem, even after I have sent to him some INJ, I sent the address to you on DM

[lime sun]

Yes, then you can bridge your ERC-20 INJ to Native INJ using the hub bridge: https://hub.injective.network/bridge

[lime sun]

Which wallet did you use to bridge? Metamask?

[loud fossil]

metamask wallet

from ARB to INJ.

[lime sun]

Make sure you're still connecting the Metamask to hub.

[loud fossil]

it is connected to metamask, same wallet used to make the txn

now it worked, idk why it wasn't working

[lime sun]

You can see the wormhole transaction now?

[loud fossil]

yes, but there is an issue now

[unique schooner]

he is offline now, you can DM me

[loud fossil]

I transfer ARB to INJ. I claimed it.

Then I transferred back ARB from INJ to ARB.

But now there is no ARB on my ARB network, does it take time to arrive?

[unique schooner]

Please note that admin never DM you first

[loud fossil]

I already sovled the issue with claimming ARB into INJ. But now I am having issue sending it back to ARB.

[unique schooner]

you can DM me your EVM address I will check

[loud fossil]

the transfer seems already have happened, since there is no more ARB tokens on my INJ tab, but no ARB tokens has arrived.

[loud fossil]

you need to accept my friend request in order to me be able to send a message

[cold marten]

I am using Keplr + Ledger. I installed the Ethereum app on my Ledger. Now when I attempt to sign a tx, I get the error "Please try again with the same ledger device/account that you've connected with this wallet."

[unique schooner]

there is a known issue with the ledger bridge, wich will be fixed in the next chain upgrade

[cold marten]

How do I bridge $INJ to Osmosis if I'm behind a Ledger?

[unique schooner]

transfer your funds from ledger to keplr, then use bridge

[cold marten]

silly q: how do I send $INJ from Ledger? what wallet should I be using?

[unique schooner]

Step 1: connect your ledger to https://hub.injective.network/
Step 2: Go to wallet section, use transfer fuction
Step3: Transfer your funds to your Keplr address. Please try with small amount first to avoid any loss

[cold marten]

I connected Ledger to https://hub.injective.network, and see a bunch of addresses (1st screenshot), but none are the address that holds my $INJ that ends with s2nvt (2nd screenshot)

[unique schooner]

you can clear browser cache and try again

[cold marten]

Did that, but still don't see the address that contains my $INJ. I even tried clicking on "Get more addresses" several times.

I suspect it's the way I obtained my $INJ. I swapped $OSMO for $INJ on Osmosis, whilst connected to Keplr + Ledger, and my guess is that Keplr uses a different derivation path? So until Injective supports Keplr + Ledger proper, my $INJ is probably stuck

[unique schooner]

Will ask team and get back to you soon. Don't worry

[raven flare]

hub cant bridge from sol to injective? keeps getting error

[unique schooner]

which error please take a screenshot

[raven flare]

all good here, but when i press confirm on phantom wallet, the loding circle just spins and then dialogue box went away automically. and nothing happens. nothing was sent

[unique schooner]

Reported to team

[unique schooner]

Currently it is not supported yet.

we’ll make some improvements in the next few days to make it better thanks for reporting

[raven flare]

not supported means i cant bridge from sol to inj?

[unique schooner]

you can try again in next few days

[raw moon]

Quick question, I have some INJ on the BSC chain in metamask. Is there a bridge to move it from BSC to INJ chain? Thanks!

[unique schooner]

There is no bridge at the moment, the only way is deposit to Binance CEX, then withdraw to Injective chain

[raw moon]

Okay cool, thanks!

[halcyon pelican]

just spent like $20 in gas trying to deposit usdt into helix to trade and it just never let me deposit lol only set allowance 🙃

[unique schooner]

now your usdt still in ETH chain?

[halcyon pelican]

yes its still there

the button never let me deposit only set allowance lol i tried refreshing and clearing cache and nothin

[unique schooner]

you can use https://hub.injective.network/bridge

[halcyon pelican]

can i get my 20 bucks back?😂

im jk lol idc itd be cool though👀 😂

[strong bobcat]

Hi Muji, would you please send me what address did you send your INJ to? on dms please

[hot salmon]

i'm new here and trying to bridge some funds from Solana. I don't have any INJ yet. I've tried using the wormhole bridge to send some SOL from Solana to INJ, but wormhole always tells me "not enough INJ" for gas. How am I suppose to get INJ for gas if it's my first time getting over?

[unique schooner]

you can send me INJ address i will send gas

[hot salmon]

inj1207965q4j0rj68an4hgk4j6vqt88dvufawn699

thank you so much

i received .0002 INJ from the stakely faucet, but it still says it's not enough to claim my funds transferred from SOL > INJ via wormhole on injective hub

[unique schooner]

gas sent

[hot salmon]

Thank you so much for your help. I'm wondering if my problem is that SOL is not supported at all on Injective? I am still getting errors. Perhaps if I bridge USDC i'll have better luck?

[iron ore]

i am getting you do not have enough funds error althoung i have sufficient funds

[normal glacier]

Initially staked with Black Panther, and it was visible in my staking overview. After attempting to delegate to Tali, an 'error' popped up in red, and now my INJ is missing from my wallet. I verified my blockchain address, and the coins I tried to delegate to Tali are not in my wallet. Only the ones delegated to Black Panther are showing, but not in my wallet on Injective Hub. Is this typical? Seeking assistance. I'm concerned about why the ones I attempted to delegate aren't appearing in my wallet address when I check the network explorer.

@unique schooner I'm worried about why the ones I tried to delegate aren't showing in my wallet address when I check the network explorer. Additionally, I'm concerned that when I check my transactions in my address details, it doesn't even show my last transaction when I tried staking to Tali. Those Injective tokens are gone and don't appear in my wallet blockchain address at all. Just want to make sure my INJ isn't lost.

[unique schooner]

please DM me details with wallet address and screenshot

[robust bronze]

@Vyz | Injective do you think you could help me? can't get the wormhole to work

[dawn dust]

hub seems to be lagging or? delegated some tx went through but hub still didnt recognize it even shows my balance as more as it suposed to be

[lilac path]

i have this same exact problem

[unique spruce]

@unique schooner i have dmed u my issue on inj hub

[hot salmon]

even after receiving some INJ from the kind people here in discord, I still continue to get the exact same error. Perhaps there is a broader issue with the wormhole bridge right now?

scammers are impersonating you in DM's @unique schooner , just a heads up to everyone

[unique schooner]

please block

[dusky vine]

I have an issue. I try to provide LP to stINJ/INJ pair on Helix. I sign first approval tx and then nothing happens. The second tx never gets triggered in Kepl and UI says

"Let Helix sends you request for transactions

Please confirm on your wallet..."

Any idea how to fix?

Second transaction must be
"Create your grid trading strategy"

[clear finch]

Hey guys, can you help me delegate? This is the first time I've ever had such an error when delegating

[unique schooner]

This is known issue and should be fixed soon. please try later

[clear finch]

THANK YOU

[dawn dust]

but its a lag on hub site or its working? couz explorer says othewise

[hot salmon]

@unique schooner so if I do this transaction to bridge from Solana to Injective via Wormhole on the injective hub, am I expected to receive SOL or INJ on the Injective chain?

[lilac path]

i think sol. i am with support on wormhole and they say you must have inj to redeem

[cold sequoia]

Yh u need inj as gas fee

[lilac path]

so do i need to buy inj on eth and bridge it over?

[hot salmon]

roughly how much INJ is needed to claim? I have .011 INJ. Thanks for your help

[dusky vine]

Also I can't redeem SOL on Inj. I sign TX but nothing happens and then it gets timed out. Is it a blockchain or wallet problem?

[unique schooner]

Checking now

[dusky vine]

thnx. Time out message Transaction was not included in a block before timeout of 60000ms

Wormhole scan link https://wormholescan.io/#/tx/gehk35YuVDwqdSEbc1VmYbeYUu4Kz6e31rNpVZw1UkV8QvBvbWVo77TiMPoBggj7HJEPuNY94JvDXcdp2qEfUfT?network=MAINNET

[full bluff]

i'm having a similar issue. i bridged 7 sol to inj. can't claim though because no inj in my wallet. tried to transfer some from coinbase to my keplr but they don't allow it. any help? willing to send $inj back if someone lends me enough to claim

[unique schooner]

Dm me your inj address i will send gas

[cold sequoia]

Yh or an easier way buy from Binance and use

[edgy lintel]

I joined mito finance today..what does this mean?

[cold sequoia]

Testnet tokens , you can use them to perform task

[edgy lintel]

Got it..

[buoyant quest]

trying to claim my staking rewards and getting the this error
How do i fix?

[inner bay]

You will receive sol on inj chain

[edgy lintel]

Whenever I try to complete a transaction, i get this error

[full bluff]

dm'd!

[hot salmon]

Thanks for the reply. Is it possible to swap SOL for INJ on the Injective chain through a DEX?

[inner bay]

Yes, you can use Helix

[inner bay]

!helix

[orchid robin]

About Helix 🧬

Helix is a premier decentralized order book exchange for trading derivatives and spot markets built on Injective. Helix features zero gas fees, best-in-class security, lightning-fast speeds, cross-chain assets, and market leading rebates (up to -1bps).

💻 Trading: https://helixapp.com/
🐦 Twitter: https://twitter.com/helixapp_
📲 Telegram: https://t.me/helixapp
📚 Guide: http://helixapp.xyz/3loTDKf

[dusky vine]

Still stuck. Anyone else have this? Or maybe I should try another wallet

[hot salmon]

how long does it usually take to bridge $INJ from Ethereum to Injective? My eth tx confirmed 7 minutes ago and still waiting.

[inner bay]

Yea just wait

[lunar barn]

I bridge using the injective hub, but now it's not allowing me to claim my wormhole TX, and not sure what to do. Bridge says the transfer is complete: https://wormholescan.io/#/tx/0x6d5cc3fdcb985d7a67cf0814574024ab99fe30b0e3a82715ecf02ad52f266ef8

[unique schooner]

you can try click "claim wormhole tx" in the bridge interface

[unique schooner]

please Dm me

[unique schooner]

please Dm me

[lunar barn]

asks me to switch to ethereum, then

[unique schooner]

send me your injective address

[lunar barn]

inj1tsshe3ngkk5h9a7lpm58y2w6kypyq2xnh6wnyx

[unique schooner]

done, now try claim again

[lunar barn]

ty sir

[dusky vine]

@unique schooner sent, pls add friend

[velvet dock]

I set up 2 trading bots, one for INJ another for TIA. I used the auto setting, so the grid price range was determined by the bot on setup. I see INJ is reaching the top of that range. Now over $21. What happens when a token trades outside the range of the bot, is it automatically ended, with a combo of token and USDT deposited back to my account, or does the bot keep running until I end it manually?

[unique schooner]

it will automatically ended if it sold all of your INJ and deposit the remaining funds back to your bank

[scenic quartz]

Bridged eth usdc in MetaMask wallet to inj MetaMask address. Now I can’t find a way to use it. How can I swap it to usdcet, usdt, or any other token which I can then use on helix and squid router? Thanks!

[unique schooner]

Please wait until MMs provide more liquidity on USDC pairs

[latent axle]

I'm confused, is there anyone who can help me, I want to make this sol/injective into an injective, or return it to my Solana wallet, my Solana network, I'm trying to find a way but it doesn't work, I tried swapping and it doesn't work either, is there a solution?

[unique schooner]

What issue when you convert

[latent axle]

I managed to convert from CW-20 to bank, but I want to convert this sol to injective, where can I do that?

[unique schooner]

Ah it is swap. Unfortunately I can't tell you exactly where. But you can find a DEX in #⚡︲about-injective

[violet cargo]

This is really noob but how do I add the Inj network to my metamask

[unique schooner]

How to create an Injective wallet https://blog.injective.com/how-to-create-an-injective-wallet-2/

[rain echo]

Can I send any cosmos/IBC token to the injective hub and have it show up under my wallet as an asset?

[unique schooner]

yes. But can try with small amount first to check

[violet cargo]

Thank you, is Inj a separate network like Eth/Polygon/Arb that I need to add?

[rain echo]

Thanks

[latent axle]

Yes swap , I tried all the swaps it seems there is no solana injective network

[unique schooner]

No, Injective doesnt work like that

[ivory jacinth]

I have connected my inj hub to a phantom wallett (unfortunately), and some of my inj are on the hub, meaning its technically on the phantom wallett. Since it doesn't support inj, i can't even sell it because i don't have enough inj on the actuall wallett for the gas fees. Can i somehow transfer my inj from the inj hub to keplr wallet somehow?

[dusk eagle]

I tried to bridge solana to inj through the injective hub but coins have not made it through. could somone please troubleshoot this with me?

[unique schooner]

you can try click "claim wormhole tx" in the bridge interface

[unique schooner]

you can DM me your address and screenshot

[violet cargo]

I see, is there a way to view my INJ balance in my metamask? I

[unique schooner]

No. If you use metamask you can only use https://hub.injective.network/ to check your balance

[ivory jacinth]

I sen't a DM sir

[pine pasture]

i deposit atom to helix app, but now i cant do nothing cause i am using ledger, how do i transfer my atom to cosmos

[mild echo]

@unique schooner i send dm sir update my xp 10 day no update my wallet

[mystic zephyr]

Will check with the team

stay tuned

[mild echo]

plz sir update my xp

[mystic zephyr]

Will be updated, no worries

I will delete your INJ address from public channels just for security reasons

[mild echo]

ok sir

[brittle owl]

I'm trying to convert my WMATIC but keep getting this error message, what could be the problem here?

[ivory jacinth]

Since I have some SOL in the INJ hub Bank, can i convert it to INJ or what is the best option here

[mystic zephyr]

That's probabbly because you don't have enough INJ

Can you Dm me with your address, please?

[mystic zephyr]

It's up to you

[ivory jacinth]

If i can convert SOL to INJ through the Hub, could you please tell me the directon where to start? i couldn't find any convert/trade options

[pine pasture]

Inj bridge is not working, so once deposit ATOM on Helix you can't transfer out. Also trying to bridge INJ to OSMO not working at least with ledger nano s. So i am very dissapointed on both Helix and Injective

[mystic zephyr]

https://helixapp.com/swap/ - but check always liquidity first!

[mystic zephyr]

Hey! That is known issue, you can't make IBC transfer with Metamask/Ledger

it will be fixed very soon

[pine pasture]

Also why do you need to connect Ethereum App, and then cosmos it is very confusing. I will send my INJ to a CEX convert it to osmo and send it to OSMO addres

[mystic zephyr]

You can transfer your assets to a Keplr single address, and make IBC transfer

[dusk eagle]

theres no option for sol on there

i have the same issue, i need to swap my SOL in INJ hub

[pine pasture]

how?

[mystic zephyr]

Create a new Keplr account, but don't connect with your Ledger. In that way you will get new INJ address, transfer there funds and you can make IBC transfer

to your Osmosis address

[latent axle]

please help me, withdraw my solana from injective network to solana network🥲

i try all dex daapss no one work

[mystic zephyr]

If you want to withdraw your SOL, you can use our bridge - https://hub.injective.network/bridge

[brittle owl]

Message could not be delivered so I added you

[latent axle]

what wallet i should chose for withdraw my solana

[mystic zephyr]

You can use all of these wallets

All of these wallets support Injective

[raven flare]

checking....i use the hub bridge to bridge sol over....but dont see it in the hub wallet. i can see the wormhole transaction is done. Where do i locate the SOL?

[latent axle]

okay i use trustwallet , wait

[mystic zephyr]

Did you redeem them?

[latent axle]

i always got an error "Tx expired ..."

Does it require eth ? , I have an inj token of 0.3

[mystic zephyr]

No, you don't need ETH to redeem

Clean your browser cookies, and try again

[latent axle]

Yes, I thought so too, but my TX always expired, I tried all wallets the same

[mystic zephyr]

Can you please send me your INJ address and your Tx in my DM?

[raven flare]

how to? the transfer finish and i dont see anylinks to redeem tho.

[mystic zephyr]

https://hub.injective.network/bridge - There is button "Claim Wormhole Tx"

Or you can try via portal bridge to redeem - https://portalbridge.com/advanced-tools/#/redeem

[ornate geyser]

faucet not giving me testnet tokens, please help

[inner bay]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[raven flare]

i see....i keep wating for a notification to pop up to tell me to redeem. means now i have to chk if the transaction is done and then come to to redeem

[ornate geyser]

using the testnet faucet, not working

[inner bay]

What are you needed? INJ ?

[ornate geyser]

Inj on testnet yeah

[mystic zephyr]

It will be on your balance soon, if you use faucet

[inner bay]

Dm your address, i can give some

[ornate geyser]

inj1shkqx4x0lh6lnl4qc964mvtqwr5awy3cmzr03n

[brittle owl]

@mystic zephyr DM sent

[ornate geyser]

I can't see injective testnet on kepler

[olive cedar]

I can’t see my full balance on metamask inj address but on injective explorer i can see my full amount? Why is it only showing half on MM

[mystic zephyr]

You need to add token - injective testnet token in Keplr if you wanna see them on your Keplr

[mystic zephyr]

Maybe because they are ERC20 version of INJ ?

and they are on Ethereum network?

[ornate geyser]

where?

[raven flare]

another question.....how do i swap the SOL that i bridged in? in helix i dont see the SOL in swap.

[olive cedar]

They were on Binance then transferred them over via injective network..

[inner bay]

done, sended

[ornate geyser]

received! thank you

[inner bay]

go there and search INJ

[ornate geyser]

i have no idea how to see it on kepler however, i used the explorer to see that I had received the tokens you sent

[inner bay]

you can check here: https://testnet.hub.injective.network/wallet

[inner bay]

it shows on me

[ornate geyser]

ok, i'll uninstall and reinstall kepler

[inner bay]

or you can try to connect here https://testnet.hub.injective.network/wallet

[raven flare]

i dun see SOL in the swap list...can only trade it?

[mystic zephyr]

Let me consult with the team about this

[mystic zephyr]

If you don't see in swap, you can check if there is spot for SOL/USDT

[ornate geyser]

clicking keplr doesn't do anything

[mystic zephyr]

Can you clean your browser cookies and try again?

[inner bay]

hmm weird, make sure you're using the latest version

[ornate geyser]

i've:

• uninstalled the keplr extension
• cleared cookies
• tried to use the connect button above
• tried to see injective testnet in keplr when managing chains
  => still fail
  @mystic zephyr @inner bay

[lime sun]

Make sure the Keplr does not gets minimized in your taskbar.

[mystic zephyr]

Oh i missed your message

I think they disabled that function on the Keplr wallet

maybe you can re-direct this to Keplr support team

[lime sun]

Getting this error when trying to stake on the Hub page.

[mystic zephyr]

Yes, i already reported

[lime sun]

Also this on wallet page:

The request to /wasm/address/cw20-balance has failed.

Is everyone facing this issue right now?

[mystic zephyr]

Everyone has that issue now, no worries

it will be fixed

[lime sun]

Alright, thanks!

[clear verge]

Explorer/transaction tab is not working,fyi

[fickle escarp]

Yes, we are aware, working on it

[urban crown]

Why my role still not updated?

[fickle escarp]

It takes time to update on galxe, if you experience any problems with galxe please contact them

[loud flare]

I used your bridge to get solana from phantom wallet to your injective platform, which succeded. I then realised that couldn't swap solana to INJ, so I then again used your bridge to get my solana back to my phantom wallet from the injective platform, but the funds did not show up in my phantom wallet even though it went through. Could you help with this? Thanks

[fickle escarp]

You can trade your SOL for USDT and then use that USDT to trade to other assets like INJ

[fickle escarp]

If you bridged you need to redeem on the respective chain

[loud flare]

okay, so I need to find out how to redeem the Solana on phantom wallet? Do you happen to know how I can do that?

[fickle escarp]

You can redeem through portal bridge https://portalbridge.com/advanced-tools/#/redeem or through the hub bridge page - where the button for redeem wormhole transaction is.

[stone plinth]

I have been trying to redeem i bridged from Solana

[fickle escarp]

You need INJ for gas fees in order to redeem on injective

[fickle escarp]

If you cant do it at the moment, give me the transaction hash and I will redeem for you on injective

[loud flare]

i also tried doing it through wormhole just now but with an error. could you do it for me? hash: 4UXdnepi3VWbeBj858kkhLtFrMgQ7PtZABvTACpDTjpEafne68MUdBYSZzbjyoYZV67jhhnDfknijGxnxoTJdn4P

[stone plinth]

I have like $3 worth of inj on my leap wallet

[stone plinth]

5JZBrLa5yJB2pZ1YgzkyRmWupDUuqne8Uo9Fi6aWUFDVonKpftDwjpxTH28Y3goozMz2R3PJfbBTBRz7YhCwWUuj

[fickle escarp]

Will try again later, once the wormhole bridge is synchronized

[stone plinth]

source chain Solana

[fickle escarp]

Just redeemed for you, can you check your wallet on the hub wallet page

[stone plinth]

okay bro

[stone plinth]

haven't reflected yet

[fickle escarp]

https://explorer.injective.network/account/inj1mu8zedpeqp0wewu5f2rh9z830dres7xkh9msp8/cw20balances/ - you have 0.7 SOL in your wallet

Check here https://hub.injective.network/wallet

[stone plinth]

damn that's not my address

[stone plinth]

can I dm you?

[fickle escarp]

That most likely is your phantom address

you need to import it to a supported wallet in order to see it

Wallets like Metamask, Keplr, Leap whichever works for you

[stone plinth]

can I send you a dm bro?

[fickle escarp]

yes

[stiff jacinth]

can I DM you as well?

[edgy lintel]

None of my transactions go through on testnet

[mystic zephyr]

Can you try via dekstop?

[edgy lintel]

Ok..

[willow raven]

is portalx safe?

[mystic zephyr]

You can re-direct this question to general

and community will help you about answer, not here plesae

[willow raven]

alright thanks

i have been trying to change my injective from the bep20 chain to the erc20 but everytime i use portalbridge i get a injective token that is not inj it is called injective protocol

[mystic zephyr]

You can't transfer via wormhole from BSC to Injective.

there is no BSC bridge at the moment

[loud flare]

wormhole claim still gives me an error when i try to redeem the solana i sent from injective to phantom wallet. am i doing something wrong?

[mystic zephyr]

What is error?

You can DM me, i will try to help you

[loud flare]

it says my message cant be sent when i try to dm you

[lime sun]

Make sure your DMs are open.

[willow raven]

i want to transfer them to etherum and then transfer them to inj

[short shadow]

so i bridged my sol from the injective hub buy it not showing in my wallet do i need to claim the funds or something ?

[mystic zephyr]

That way, it's fine

[mystic zephyr]

Did you redeem them?

[short shadow]

no how do i do it

[mystic zephyr]

https://hub.injective.network/bridge - Claim wormhole tx

[willow raven]

but im wondering what can i use to do that because everytime i try using portal token bridge i get a weird token called injective protocol

[mystic zephyr]

If you bridge that version on Injective you can't do nothing with that

so it's best to transfer first to Ethereum network like ERC20 INJ and then bridge to Injective Chain

or you can transfer them to Binance, and from binance directly to Injective Chain

because Binance supports native withdrawals and deposits

[short shadow]

doesnt show anythign to claim here

[mystic zephyr]

Did you already use wormhole bridge?

[short shadow]

yes i already did 2 trasactions actually

[willow raven]

i do not have acces to binance and that is what i did i transfered from bep20 to erc20 and on my etherum wallet i still got the protocol

[short shadow]

i bridged from the same link that you sent me above

[mystic zephyr]

But you need to click "Claim Wormhole Tx"

after that need to select your Origin network

Put your Transaction Hash and then redeem

[short shadow]

yoo

it worked preciate it much brother how long does it usually take to show up on wallet

[willow raven]

above is the good injective and below is the protocol i got, as you can see i am on my etherum wallet and i am wondering if i did something wrong. this is the result of bridging from bep20 to erc20

[short shadow]

it says i was suceesfully able to claim it but doesnt show in my wallet

[mystic zephyr]

Can you send me your INJ address in my DM

please?

[short shadow]

ok

[mystic zephyr]

That's weird for me, it's best to contact BNB team support, and they will tell you exactly how to transfer them to Ethereum network

[willow raven]

what is the bridge you use?

[mystic zephyr]

like i said, there is no BSC bridge

So you need to transfer them to exchange who supports native INJ withdrawals and deposits

or transfer them to Ethereum network and after that use our Ethereum(peggy) bridge

to bridge them to Injective Chain

[willow raven]

i know but what bridge do you use to transfer from bep20 to erc20

[mystic zephyr]

That best to ask BSC team support

[placid oak]

anyone know how to fix the scale loading problem on kplr?

[inner bay]

Better to ask Keplr team

[sand skiff]

@mystic zephyr Stefan, would you please add me as a friend in order to DM you. Thanks in advance!

[mystic zephyr]

I can't add or write in DM to anyone.

Please do that you

[sand skiff]

But I can't DM you if you don't add me as a friend...I already send you a friend request...please, check and accept it...thank you.

@mystic zephyr ok, so yesterday I bridged from Osmosis to Injective and even that the transaction status is saying complete I never got my INJ on my Keplr address...please, advise how to proceed...thanks.

[mystic zephyr]

Can you send me your INJ address?

[sand skiff]

inj1a7xz7mnpw3ne4lt50hyzg0alz26r84cmjfv4xu

[plush forge]

I bridged phantom solana to metamask inj but theres. O history

[mystic zephyr]

It's best to re-direct this issue to another place. I can't help you here if you didn't transffered to Injective Chain - reason is we don't operate and there is impossible to help you

[marble crescent]

How do I swap them to INJ?

[mystic zephyr]

You can use Helix for that https://helixapp.com/

[sand skiff]

@mystic zephyr any feedback on my issue?

[marble crescent]

can't see sol there

[mystic zephyr]

If you don't see on the swap function, there is markets

SOL/USDT

[mystic zephyr]

Give me more time to search about your transactions

your funds can't be gone from the hub

[sand skiff]

Thank you 🙏

[restive sandal]

Source address: cosmos19ssmdq4fv9fz7kpfrp5qz0e7e038zulxhqkmd3
Destination address: inj1ffj6lqqd6e59q57xmyrwv9zjfafncpmgzpq37h
Used bridge from CosmosHub to Injective: https://hub.injective.network/bridge/
Transaction marked as completed.
Trying to "Claim Wormhole Tx"
I guess the origin network should be Ethereum (wormhole)
There are 3 Tx hashes:

• A60259B41F8D3FD25D792972C393E0BC78FA2D4A588C0A992E3FD4479955EA44
• 5B018DBD85AFCDA008A41C20A503697B4EA4547C9FDCE27618DDD27F25DF065C
• AB4702A54AFFF8F40C6320F4F5CE29A66EBA5F6DE6E2AB4792F1BDFDC0A93F46
  Which one is it I have no idea. I tried them all
  I cant redeem with any of those. I have enough gas on cosmos and inj

[mystic zephyr]

But you don't need to redeem if you transfer from CosmosHub to Injective

[restive sandal]

Nothing has been received on my destination address though. And since it seems to be using wormhole, I thought I had to redeem. I just have no idea where are the funds located then
If I try to revert the transaction from INJ to cosmos hub, the UI shows me that I do indeed have the amount that I sent on INJ. But I cannoit see it in my wallet

[fickle escarp]

From where did you bridged?

[fickle escarp]

This is an IBC transfer there is not redeeming on IBC bridge transfers

You should see your atom in the wallet page on the hub

You have 20 atom in your wallet https://explorer.injective.network/account/inj1ffj6lqqd6e59q57xmyrwv9zjfafncpmgzpq37h/

[restive sandal]

Ok my bad so theres some knowlkedge that I dont have. First time using the bridge, what does IBC stand for?
And what should I do to bridge my ATOM to INJ then?

[mystic zephyr]

IBC is for Inter-Blockchain Communication

etc etc

[mystic zephyr]

If you want to transfer from CosmosHub to Injective this is the right connection

[restive sandal]

Oh wait. First of all I just had a very stupid confusion. In my mind I was doing a bridge + swap
My goal was to bridge ATOM from cosmos hub to injective then swap those ATOM to INJ
So thats why since a few minutes I was looking for some INJ which is completely stupid lmao

[mystic zephyr]

No

that are two different things

First you bridge and then you use dapp build on Injective for example Helix

and make the swap

[valid sonnet]

Please help me with this. Metamask provide me this address and I send token. Looks like it's a generic address that I wasn't allowed to send tokens to? How can I fix this?

[restive sandal]

Yeah my bad guys. I just made too many transactions and got somewhat confused here. I just swapped to INJ successfully. I have no idea what happened in my mind
Thanks for the support 👍

[mystic zephyr]

the address which starts with inj.. is your INJ address

that INJ address is compatible with your ETH address

[valid sonnet]

how to access this address?

[mystic zephyr]

You already have access

check in your upper right corner

That's yours INJ address

[valid sonnet]

How? I dont see any tokens

[mystic zephyr]

Can you send me screenshot from the whole screen?

[valid sonnet]

Do I need make a new wallet with my seeds frase?

[mystic zephyr]

No need for that buddy

you are already connected to the hub

[cosmic ruin]

i did the same thing and cant find my funds... i went to inj hub > bridge > arbitrum network to inj network and chose ARB as the token to bridge ... now i cant find my arb ... MM shows that the tx was successful.

[mystic zephyr]

You need to redeem in order to see them on the hub

[cosmic ruin]

ya i clicked "claim wormhole tx" is that correct?

[mystic zephyr]

Yes

put origin chain and put your Transaction hash

[cosmic ruin]

yep, then i copy pasted the tx ... did not work

[valid sonnet]

I try, and still nothing

[mystic zephyr]

Okay let's do from begining

What are you trying to do, and where you with steps right now?

[mystic zephyr]

What is error? Send me in my DM

[opaque ginkgo]

I received test tokens to use on platforms. Attempted to use at Mito & Aeroscraper. Link wallet & see balances for tokens. When confirming a potential transaction, get error message - failed to get balance & no transaction occurs

Fetch Balance error

[cosmic ruin]

wow! whoever sent me the inj to get started, thank you so much!

[timid latch]

i bridged inj on wormhole over but its showing my tokens r here for some reason

[mystic zephyr]

You bridge them from BSC?

It's not right way, now you can't use that version

you need to bridge them back

[timid latch]

ah shit, got ya

[mystic zephyr]

and transfer from BSC to Ethereum or Binance

and then deposit to Injective

[paper cobalt]

Guys, i got an error bridging my atom from inj to cosmos

The error says "This wallet does not support signing using amino"

I'm using Keplr Wallet

@fickle escarp

[timid latch]

Can i still use portal bridge to bridge from ethereum to INJ, or should i use official bridge?

[green juniper]

I accidently send INJ from osmosis IBC to address that Coinbase give me for INJ instead INJ onchain. Any idea if I can recovered it and who should I contact?

[mystic zephyr]

if you bridge from Ethereum to INJ you should use official peggy bridge

[fickle escarp]

For INJ bridging from ETH use the Ethereum bridge on the hub, not wormhole

[hazy zephyr]

I used wormhole to bridge SOL to INJ. I now have SOL in my INJ wallet instead of INJ. It is in "bank" format. I do not want it to be CW20, right? I mean I thought when I bridged I would have native INJ in my wallet. How to convert to INJ with SOL in my native wallet?

[fickle escarp]

Yes, correct, in order to trade your SOL to other assets you need to go to the exchange dapps like helix https://explorer.injective.network/featured-dapps/ and select the respective trading pairs

[fickle escarp]

Can you try cleaning cookies and cache

and try again

[hazy zephyr]

I am in Helix. I go to "swap" and there is not a SOL token listed there

[cosmic ruin]

wow. this is really silly. cant utilize helix or others to simply swap arb for inj or a stablecoin, instead you must go to market and open a sell order and wait for it to be filled. like why would the bridge even give bridging arb token as an option. dumb.

hub bridge made it seem like it was going to be a smooth process by offering arb as the token to bridge.
now im waiting for this sell order.

[hazy zephyr]

The only way I can see my SOL is in the INJ explorer for my wallet - I cannot see it in my wallet in INJ

[fickle escarp]

You can go to the trading pair and trade it manually https://helixapp.com/spot/sol-usdt

[fickle escarp]

The swap function creates a market order, you can either use it like this or just do it manually on your own through the trading pair

This is an Order book module, its different than AMM

[fickle escarp]

You need to connect with the correct INJ address