🆘︲help-and-support-old

[fickle escarp]

Therefore the funds should be there if he withdrew from binance

He should verify through the information a.k.a transaction hash from binance

[daring minnow]

Exactly

[daring minnow]

@topaz parrot check your transaction hash and confirm you sent the token to your injective address attached to your metamsk from the hub

[topaz parrot]

No

[fickle escarp]

can you give me the inj address to check

copy the address

[topaz parrot]

inj1umckf2my6gdsgzl2re4cnfnrc6z008x0fvgd9t

[daring minnow]

@fickle escarp

Although it seem different from the hub image

I think that is where the issue might be

He might be connected with another address to the hub

[fickle escarp]

You are connected with a different wallet address. The INJ address in which are your INJ is the one that you sent.

You need to connect with the correct wallet address

[daring minnow]

Exactly

[topaz parrot]

İ have one metamask

[fickle escarp]

How did you got the other address if you have only 1 metamask? Do you have more than 1 address in metamask?

[languid crescent]

Large stuck funds is stuck , Apparently the problem in the IBC relayer is on the Axelar side or the Injective validators ?
https://axelarscan.io/gmp/CB482F1546FD2294FDA9E3B2C8DCD200B70158F592990BA71D4F340759FA9DE4

[fickle escarp]

Let me check

[topaz parrot]

I send dm

[fickle escarp]

How did you transferred from Osmosis to Axelar to Injective directly

[fickle escarp]

Problem solved!

[topaz parrot]

Many thanks to everyone for their support ❤️❤️

[languid crescent]

I bridged it on the Squid+Alexar bridge from Levana Protocol

[fickle escarp]

Noted, I will check and i am reporting it

The funds have not arrived for 3 hours now?

[languid crescent]

6 day, Unfortunately, I don't know if Axelar has the problem or not.

[fringe zodiac]

where can I open a ticket for support, my query might turn out to be a long one.

[fickle escarp]

You can do it here, just write down your issue

[fringe zodiac]

The situation is kinda tricky, a few months back. I've some INJ deposit to my binance but It didn't arrived on the binance for many days. Then I opened up a ticket on it since most of it was automated. It got rejected multiple times even though the details were matching. I've used the helix app to send the INJ to binance.
The thing here is I've copied the Binance BEP20 address for INJ & sent the native INJ on it. The helix somehow converted the EVM address to it's native conversion & sent the coin there.
The BEP20 deposit address: 0x2775eef68872895f8c08865e8e494ed8909e492e
and when you search that address on the injective explorer it automatically shows this address inj1ya67aa5gw2y4lrqgse0guj2wmzgfujfwdekluy containing the INJ I've sent few months back. I've talked to their support for several times regarding this issue. But they always people over keplr or injective can only help you. But I don't understand since the wallet is in the custody of them.

[fickle escarp]

You were transaction on Injective blockchain and transfers can only be done to INJ addressess. When you inputed your address from the exchange it was automatically converted to inj address. If the excahnge doesnt assist you, consider the coins sent to that address lost

[fringe zodiac]

no keplr ser

[fringe zodiac]

I somehow depicted that, since It's not like one can access the wallet they don't have seed or private key to it.

Since I had a little of hope in case someone might be able to remedy my situation here. Since it's lot of money here & I've put in it.

[fickle escarp]

Only the exchange themselves can help you. Its because they are the ones with the keys.

I am sorry but there is nothing we can do on our end

[fringe zodiac]

and they are not willing to do any of the help from their end. They're straight cutting me off. saying that since the wallet is not actually the bep20 but the native of it. It's an non-binance wallet & they don't have private keys or seed to it. Idk how is that possible in one sense

[calm swift]

Sorry to say...When you make any wallet...bro it's our first priority to save our seed or private key some where or write on somewhere ❤️

[fringe zodiac]

the issue is not with my wallet but where the coins currently sitting at & that is in custody of Binance.

I wish I could show you the long hard like 2 hour of live chat with their CS agent. But at the end of it, it was nothing they completely shut me down

[calm swift]

Hope Binance support team help you

[fickle escarp]

Can you check now, should be fine now

[languid crescent]

Yes, sir, thanks!

[sullen estuary]

same thing for me

[strong bobcat]

Do you have a bridge transaction stuck?

[cold crystal]

I having issues with sending INJ from INJ Bridge to Osmosis

[unique schooner]

Please describe the issue

[cold crystal]

i keep getting error message and sending

[unique schooner]

You can take a screenshot and send to my DM

[cold crystal]

ok

[unique schooner]

Please note that there is no ticket system here , be careful

Are you using ledger?

[cold crystal]

yes

[unique schooner]

This is known issue and should be fixed soon. You can send your funds from ledger to keplr then try bridge, or wait until the next chain upgrade soon

[cold crystal]

ok

[compact stratus]

I completed my ambassador duties, but my points are not uploaded

[mystic zephyr]

It takes time for update, please check in a while

[compact stratus]

@mystic zephyr ı did this 3 days ago

[mystic zephyr]

Okay, let me report again

[compact stratus]

@mystic zephyr thank you

[calm swift]

I m also facing same issue

[lament frigate]

I'm not sure how to use the Injective Hub to do this.

can anyone help me with staking my INJ from my Ledger Nano S?

[mystic zephyr]

What are you trying to do?

are you a connected with your Ledger on the hub?

[lament frigate]

Yes I have connected my ledger with to the hub

[mystic zephyr]

Go to staking page now, choose validator

Click delegate, and confirm transaction on your Ledger

[lament frigate]

So I don't get an option to choose a validator:

[mystic zephyr]

Scroll down

"Validators"

and you can see all validators there

[lament frigate]

that's all I see. I don't see a list to choose from.

[mystic zephyr]

Hmm, maybe because you have 0 INJ in the balance

can you make hard refresh, or clean your browser cookies

and try again?

[lament frigate]

What is a hard refresh?

[mystic zephyr]

Ctrl + F5 or if you have Mac - Hold down ⌘ Cmd and ⇧ Shift and then press R. Or, hold down the ⇧ Shift and click the Reload button.

[lament frigate]

ok I see it now. So to stake, do I have to transfer all my INJ tokens to an injective address? How do I know it will be safe? I feel like I am losing custody of my tokens?

[mystic zephyr]

Yes, if you want to stake you need to transfer your INJ to Injective Chain in that way you will get native INJ version

it's the safest way if you keep them on Injective Chain

[lament frigate]

and the INJ that I earn from staking, where are those accumulated in the same INJ address?

[mystic zephyr]

That will be in same INJ address.

Keep in mind that your INJ address is compatible with your Ethereum address

[lament frigate]

ok thanks. How do I save my address details? It doesn't let me copy the address?

[mystic zephyr]

Your INJ address is in your right corner

[rapid jolt]

Sir help me please

In injection ambassador program website my Twitter not verified.

[fickle escarp]

It takes 24 hours to synchronize

[rapid jolt]

Sir already one week over

I already told here before 2 days

[fickle escarp]

Yes, we know about that, we are looking how to solve it

[rapid jolt]

Please sir help

I want this earning opportunity. This is very important for me and my family.

[chilly stone]

There will be some issues with the website, brother, don't worry, we will try later.

[little lance]

exactly

[rugged flint]

I linked my twitter to the injective bonusblock for over 24 hrs now yet it is not marking it as a completed task. any help i can get?

[fickle escarp]

You need to become a warrior to get the xp

[rugged flint]

A warrior on dc ?

[chilly stone]

yes sir that's what he says

[fickle escarp]

Yes, correct

!warrior

[orchid robin]

How to become a Warrior?

Warrior is an entry-level ninja who has learned the basics. To become a Warrior:
1️⃣ Reach level 5 on Discord by participating in conversations
2️⃣ Add a Ninja emoji 🥷 next to your Twitter & Discord names
3️⃣ When you get the Warrior role for 1 month and feel ready, complete the Ninja Masters Application to level up your rank and become a Knight. You will need to provide a list of 🛠｜tasks you have completed: https://injective.typeform.com/ninjamasters

[rugged flint]

Aiit, thanks

[rugged flint]

seen

[teal eagle]

By the way, I’ve been like this for more than a day, nothing has changed

[fickle portal]

ANY update on when we can move funds out from INJ via ledger ? thanks

[fickle escarp]

After the next chain update which is going to happen very soon

[fickle portal]

rough timescale ? few weeks, a couple of months ?

[fickle escarp]

Should be a few weeks away

[fickle portal]

thanks

and just finally - if the assets are on INJ network, is there absolutely no other way to move the INJ to legder

or can i attach the ledger (if i removed all other assets off ledger) to MM and import the seed phrase and then move the INJ into MM and then move elsehwere ?

is that correct ?

[fickle escarp]

Yes, you can do it this way, you can import ledger 12 words to another wallet like metamask and transfer them

[fickle portal]

OK but thats not very practical as you can imagine and I guess is an absolute last resort but hopefully you guys get the chain update done asap - been waiting months

[fickle escarp]

Yes, I completely understand

[last grail]

I cannot claim the points of the early supporter mission in Galxe

[fickle escarp]

Points doesnt matter in galxe

so no worries on them

[last grail]

Are oats important? So what will these turn into in the future? 😄

[fickle escarp]

They can give access to test various dapps in the future

[last grail]

❤️

[wheat lion]

i am trying to bridge out from injective into ethereum, but i always get this message : rpc error: code = NotFound desc = account, is there a known way around this?

[strong bobcat]

Hey, answered you on #💬・general

[warm inlet]

Cannot get this step to complete. Any ideas?

[crude garnet]

Which step?

[warm inlet]

Sorry there was a timeout, posted now

Will not accept my Twitter connection to let me go to the next phase....

[strong bobcat]

Please give it some time to update

[crude garnet]

May be disconnected the wallet and try again

[warm inlet]

I left it a few days ago and came back. Let me try to disconnect and reconnect like @crude garnet suggested and see if that works

Tried disconnecting and reconnecting wallet and also unlinking Twitter and relinking =, no luck

Is there a way to open a support ticket for this?

[strong bobcat]

We'll be hosting a call with Bonusblock this Friday, feel free to ask then so we can find the solution

[warm inlet]

Is anyone else having this issue?

[civic socket]

Most of us actually

Team is aware of it , would be sorted soon

[strong bobcat]

Yeap

[warm inlet]

Ok, thanks for the feedback @strong bobcat & @civic socket . Hopefully it can get fixed soon...

[rain junco]

Who to dm for open mic 🎤 in one of the fast growing AMA group ?

[valid glade]

Messed up my pyth deposit from Sol chain to Inj. Its wants me to paste the transaction hash which i have but I'm getting errors.

Can't redeem 1000 pyth. Transfered from Sol to Inj.

[strong bobcat]

Do you have inj for gas fees?

[valid glade]

Yes

[strong bobcat]

What error are you getting?

[valid glade]

Possibly not actually, my Inj address isn't my usual one. I've just used Metamask to log in

[strong bobcat]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[valid glade]

I wanted to bridge to my Cosmos inj wallet, metamask seems to have made me a new inj wallet. I'll top it up with a bit on inj and see if i can claim

I need to paste the tx hash to claim from Wormhole but I can't seem to find the correct hash.

[strong bobcat]

Need to look it up on solana explorer

Look for your solana address

[valid glade]

Sol explorer cheers

Gonna need a bit more help. I'm not 100% on which tx hash is correct. The bridge seems to have multiple txs from what i can see on the explorer

[strong bobcat]

Sure, feel free to dm your wallet address, can check for you

[forest garden]

My interactions with Inj are not counting in the ninja ambassador program

[unique schooner]

The system needs time to synchronize data, please check back later

[forest garden]

Does it take days to synchronize cause I have tried these things since yesterday not today but no changes

[unique schooner]

We're fixing that issue please standby.

[forest garden]

Okay

[abstract wedge]

anyone know why my coinbase wallet address for inj is not a valid address?

[fickle escarp]

Coinbase doesnt support native injective deposits and withdrawals

[abstract wedge]

ok whats the workaround?

[fickle escarp]

You need it as an ERC-20

[abstract wedge]

ok what bridge are we using?

[fickle escarp]

You can bridge it ETH through the hub bridge page, please check the hub guide https://blog.injective.com/en/injective-hub-guide/

[abstract wedge]

sorry but it says I have 0 INJ but my keplr wallet is loaded.

[fickle escarp]

You are not connected with keplr, double check with which wallet you are connected

[abstract wedge]

Well first i selected my keplr wallet in the upper right. Then the FROM was updated with my keplr address. Then the TO I added the metamask which I connected. So i should have both keplr connected as FROM and MM connected as TO, right?

but now when I scroll over the upper right it shows the metamask logo with my keplr address.. not sure how to resolve

[fickle escarp]

We disabled this option because people accidentally trasnfered their funds to the wrong address in one of the wallets

You can just transfer your INJ to metamask wallet INJ address and bridge from there

It will take a few seconds

from your Keplr address send to metamask INJ address then you can bridge to ETH without problems

As for ETH bridge you can connect only with metamask

[abstract wedge]

ok so use my erc20 address and when the INJ makes it to MM I bridge from there

[fickle escarp]

Yes

[abstract wedge]

thx sir

i swear im not a moron - you told me to transfer from keplr straight to MM right?

[fickle escarp]

To the INJ address connected to that address in metamask

You are on injective chain

it can be confusing the first time with metamask

connect with metamask to the hub and take your INJ address from the hub

[abstract wedge]

this address?

[fickle escarp]

yes

send a small amount first to see that you will see it on the bridge

just to note:

The ETH bridge has a 10$ withdrawal fee to cover the gas fees on ETH

[abstract wedge]

OK I'm def going to get confused like a year from now when I cash out. Are these instructions anywhere I can bookmark?

[fickle escarp]

You can bookmark the hub guide - https://blog.injective.com/en/injective-hub-guide/

Also the injective bridge video guide - https://youtu.be/SspkXnldqHc?si=pWh6zgeYWiWz_yA7

[abstract wedge]

the links dont actually go thru how to offboard. It's okay I took down notes. Thanks @fickle escarp

[quaint jolt]

I'm Tetiana, representing DAOsign.org. Is there any opportunity to contact someone from the team regarding the Injective Ecosystem Venture Fund?

Thank you!

[fickle escarp]

You can apply and check more details here: https://injective.com/venturegroup/

[fickle escarp]

Follow injective galxe page

[keen schooner]

Ok ser

[keen schooner]

I’m already following ser

Just claimed thanks.

[onyx mantle]

sent a few hundred $ worth of inj yesterday and it wasnt recieved

[strong bobcat]

Hi congo, would you please provide more details? Where did you send from?

[onyx mantle]

Heya, I sent from my keplr to my gf’s CRO inj address

[unique schooner]

Did you put memo?

[onyx mantle]

I looked for a memo but didn’t see any to enter

[unique schooner]

In this case please reach out to their support team, they will help you to get your funds back

[onyx mantle]

Their as in CRO?

[unique schooner]

Yes

[onyx mantle]

Thanks for the quick reply, have a good one

[hasty sail]

Failed to claim

[unique schooner]

you can ignore those points

[hasty sail]

Ok what I should next

[unique schooner]

you can join ambassador program if you interested in rewards

!ambassador

[orchid robin]

Injective Ninja Masters Ambassador Program <:ninja:923265703539261521>

The Ninja Masters Ambassador Program allows participants to engage with Injective like never before and earn exclusive rewards!

To get started as a Ninja Ambassador you must be:
1️⃣ Following the official Injective Twitter: https://twitter.com/Injective_
2️⃣ Joining the Injective Discord Server 🛠｜tasks channel to begin completing short tasks to start leveling up.
3️⃣ Reading the complete program details: https://injective.xyz/ambassador_overview

[hasty sail]

Ok

[zenith star]

ok guys am deeilus on the screenshot won 50xp how can it be added for me

[unique schooner]

Please reach out to injspace team

[zenith star]

how can i contact them ?

[unique schooner]

Via twitter or other method if any

[snow trench]

Have an issue, I have transfered Pyth from Solana to hub.inj. After that i claimed Pyth at Wormhole TX windows and all was ok. One hour after that i have transfered back Pyth to Solana and some SOL wich i bought on Helix. For now i dont see this coins in Phantom wallet. Can you guys tell me what im doing wrong ? Thank you

[unique schooner]

You can dm me wallet address on both chain i will take a look

[snow trench]

ok, send you a message

[glass parcel]

Please I just withdraw from helix some tia, but did not receive them till now about 20 min

[mystic zephyr]

Can you send me your INJ address in my DM please?

[glass parcel]

Sir just DM you the transaction Hash

[keen schooner]

Ser why is this oat not claiming, help out🙏

[mystic zephyr]

You already claimed

see down

[keen schooner]

OMG thanks

It was for mito i intend sending

I claimed too. Thanks

[hallow star]

great

[nova ravine]

I sent 1 PYTH from injective to Phantom wallet but not showing up?

[fickle escarp]

You need to redeem it on Sol, its a wormhole transaction

[nova ravine]

how do i do that?

[fickle escarp]

You do it through the bridge page or through the portal bridge wormhole website - https://www.portalbridge.com/#/redeem

You need sol for gas fees to redeem your transaction on sol

[nova ravine]

thanks it worked - my feedback is claiming wormhole transactions is a pain and can't be a good model going forward

[snow trench]

Guys, I have the question about this "Do at least 3 transactions on any dApp on Injective per week" this dApp is Helix ?

[fickle escarp]

Any dapp works

https://explorer.injective.network/featured-dapps/

[snow trench]

I have question about MITO i have been doing the mission but have no progress with HP

Is this right channel to ask ?

[fickle escarp]

Mito missions ended

[snow trench]

sad 🙂 thanks for help

[latent pelican]

Can I bridge INJ I have on bnb smart chain to native injective?

[unique schooner]

Unfortunately no bsc bridge yet

[manic jay]

trying to bridge - when setting allowance rabby is not displaying the txn to approve- this has not happened anywhere else

[unique schooner]

Please clear your browser cache and try again

[latent pelican]

Ok, thank u

[sly osprey]

When trying to do any operation with Ledger, during the signing process, this happens. Is it only me? “TransportStatusError: Ledger device: Invalid data received (0x6a80)”

[unique schooner]

what transaction you signing? stake or bridge or?

[sly osprey]

Trying to claim and tried bridge too

[unique schooner]

Are you connecting ledger directly to the hub?

[sly osprey]

Through metamask or rabbi…direct connection never works for me

i can connect direct, but whatever I click, the wheel just keeps spinning

[unique schooner]

You can disconnect -> clear your browser cache -> directly connect ledger again

[sly osprey]

yea, that never worked for me on any computer. I can connect directly, I see everything, but any operation I wanna do is just spinning wheel. Tried different pc, different OS, this direct method never works unfortunately

[unique schooner]

You can screenshot this issue and DM me wallet address too

I will forward to team

[sly osprey]

Needless to say, it is only INJ where i keep having issues interacting, every other chain Im using works okay

[unique schooner]

Sorry for the inconvenience, please dm me the screenshot and your wallet address we will check

[sonic forge]

How can I join the ambassador’s program?

[mystic zephyr]

!ambassador

[orchid robin]

Injective Ninja Masters Ambassador Program <:ninja:923265703539261521>

The Ninja Masters Ambassador Program allows participants to engage with Injective like never before and earn exclusive rewards!

To get started as a Ninja Ambassador you must be:
1️⃣ Following the official Injective Twitter: https://twitter.com/Injective_
2️⃣ Joining the Injective Discord Server 🛠｜tasks channel to begin completing short tasks to start leveling up.
3️⃣ Reading the complete program details: https://injective.xyz/ambassador_overview

[muted mural]

Impossible to get Mito Missions Participants oat on Galxe. Why?

[mystic zephyr]

Mito missions finished

[muted mural]

Yes, I know. And now we can claim Oat on Galxe for those who participated in Testnet.

[mystic zephyr]

If you have issues with Galxe, re-direct this to them directly

[muted mural]

The problem is not with Galxe.

[mystic zephyr]

Then what's your issue?

[muted mural]

Last update time One month ago. Problem with curator because he doesn't update it

[mystic zephyr]

So wait for the next update

i will forward to the team as well

[muted mural]

Thank you 👍

[viral delta]

What is gov discussion chat ?

[mystic zephyr]

Community channel to discuss submitted and upcoming governance proposals.

[quick galleon]

Please check dm @mystic zephyr

[north canyon]

i just deposited 2000 USDC into helixapp. i converted it to USDCet and it turned into .02. am i missing something or just lost $2k?

[fickle escarp]

That trading pair was disabled as there is no liquidity on it

[north canyon]

it told me i had to convert it

[fickle escarp]

how did you converted it?

[north canyon]

in the app. it showed me having a $2k balance and i put in 2000 USCet

under the account overview it showed a dropdown underneath USDCet with my 2000 USDC. the only option was to "Convert". i clicked that and it said to convert to USDCet because the ecosystem uses that. i did so, and it gave me .1998 USDCet

[fickle escarp]

let me report it

[north canyon]

ok please let me know. i deposited using the Injective Bridge from Ethereum. i wanted to try the platform.

i DM'd you the deposit

[manic jay]

did not solve

this is the only site that gives me this error

[fickle escarp]

Rabbi is not a supported wallet officially, i recommend using the supported wallets when trying to bridge

[manic jay]

when is rabby going to be supported

[fickle escarp]

No information for rabby full support for now

[manic jay]

hope that comes soon.. metamask is no good

[rugged flint]

I've been having issues linking my twitter account to carry out the the ambassadorial task

It never marks as "completed"👆

[fickle escarp]

It takes time to synchronize, usually it take 24 hours

[rugged flint]

Alright, thanks

[undone nacelle]

Please my point is not always adding up on the block bonus

[strong bobcat]

Please give a couple of days for tasks to update

[brave swallow]

Is anyone else having trouble claiming their early adopter rewards on the claim site? I have a good amount that I would really like in my wallet about now lol

Injective.events or something like that. Thank you for anyone that can offer assistance

[acoustic wave]

can you send the claiming link please?

[unique schooner]

What error please take a screenshot

[brave swallow]

I have a couple.....one sec

I actually have to real wallets I've used since the jump....I'm not sure what is going on lol.

[unique schooner]

It is a scam website

Disconnect your wallet ASAP

[brave swallow]

I knew you were gonna tell me that....schise! Or however you spell it lol

Is there a real website then?

[inner bay]

Check #⚡︲about-injective for official links

[unique schooner]

There is no airdrop

[brave swallow]

Double poop!!!! You guys are making my night lol

[inner bay]

Be carefull bro

[acoustic wave]

omg

[acoustic wave]

if you sign a tx your wallet will be left bro always ask from the official first

[leaden shoal]

can anyone give me the contract address of the bridged weth because it’s not visible in my trust wallet app and I would like to import it

[unique schooner]

Please reach out to wormhole support team

[leaden shoal]

it’s not injective thingy? hmmm sorry for the spam then

[unique schooner]

We use wormhole for eth bridge

[agile fog]

Any guide for injective smart contract?

[unique schooner]

#⚡︲get-started-buidlers

[alpine night]

Hei @mystic zephyr , any updates on what we discussed in dm?

[modern otter]

Where can I share screenshot I have problem linking my twitter

[mystic zephyr]

You can share in my DM

[twilit onyx]

Do INJ wallet addresses have ethereum equivalents?
If I'm using Keplr do I have an ETH equiv address that I can look up?

[mystic zephyr]

You INJ address is compatible with your ETH address

[twilit onyx]

That's too vague for me sorry. Too dumb

I have Keplr wallet. I have an ETH wallet address in a coinbase wallet. It has ETH in it. Pretty sure they are not connected in any way. 🤷‍♂️

[mystic zephyr]

If you mean that you can't see ERC20 tokens in your Keplr wallet, because Keplr doesn't support ERC20 transactions

if you want to withdraw ETH on Injective Chain, that should be wETH = wrapped version of ETH

To understand better check this message = #💬・general message

[twilit onyx]

No I mean I'm going to claim the PYTH airdrop and it'll only take an ETH address for Injective. What is that? I've got hundreds of INJ. Should be good for airdrop. But I don't know how to relate it to an ETH address.

[mystic zephyr]

Because your INJ address and ETH are compatible

i really don't understand what is confusing you

or what are you trying to do

It doesn't matter how many INJ you have for PYTH airdrop btw

[twilit onyx]

Dialog says "Enter my Ethereum Injective Address".

[mystic zephyr]

where?

[twilit onyx]

Claim page.

[mystic zephyr]

But where, which site

[twilit onyx]

https://airdrop.pyth.network/

[mystic zephyr]

Let's do this

Do you have Metamask?

what are you using? Keplr?

[twilit onyx]

Keplr
Leap
Cosmostation

[mystic zephyr]

actually you can DM me

we will deal step by step

it's not my job for Pyth airdrop, but will help you

[twilit onyx]

That's very kind of you.

[mystic zephyr]

but in DM, not here i don't want spam here with steps please

[twilit onyx]

I just want to understand how it wants me to connect an ETH wallet.
You're gonna hate me now but I'm on mobile. Not prepped at the desktop currently. Sry.

[mystic zephyr]

Just DM me, i will tell you how to make them compatible

[twilit onyx]

All clear now!! Thanks!

(Goofy mobile discord)

[celest gale]

I need list on dapps on injective

[mystic zephyr]

https://explorer.injective.network/featured-dapps/

[celest gale]

Thank you fam

[jolly sedge]

How can i get pyth airdrop and be eligiblee ??

[mystic zephyr]

Redirect this to the pyth support team buddy

[midnight steppe]

do you still have the problem of not completing Twitter Mission in Ambassador program?

[strong bobcat]

Yes. Twitter tasks takes a couple of days to update

[robust owl]

Helloe guys!

I bridged ARB from Arbitrum to Injective. When I try to claim tokens on Injective Network, the system asks me to connect Keplr wallet but the wallet I'm using is MetaMask (connected to Trezor)

What's the solution for my case?

[unique schooner]

Please send me wallet address I will check

[robust owl]

0x0aE86cA9596b5d1eD58522B755B1d87AFFA91D64

[unique schooner]

thanks for reporting

[robust owl]

You welcome and waiting for your assistance. It will be very much appreciated.

[unique schooner]

You can scroll down and use this function to claim

[robust owl]

I tried this. It keeps asking to change network from Arbitrum to ETH and then shows the following error

[unique schooner]

ah don't worry, wait a sec

[unique schooner]

you can try again now

[robust owl]

Alright, checking it

[left salmon]

Where to find memo code withdrawal from cex to inj wallet?

Binance asking memo code while withdrawing to Kepler wallet @near veldt

[mystic zephyr]

You don't need memo/tag when you deposit to Injective Chain

You need to connect to the hub with your Keplr wallet, get your INJ address and put in Binance, without memo

Here are the tutorials for Binance, you can do that step by step https://youtu.be/ZuhzHCh8B9I https://youtu.be/dW3rjTe7RXo

If it's something unclear to you, please let me know

[left salmon]

Done and bought inj domain Id also thanks 🙏

[robust owl]

I bridged successfully. Thanks for the assistance.

[left salmon]

Can I make multiple swap on helix Dex for ambassador program or any limits there are?

[mystic zephyr]

You need to make 3 transactions on Injective dapps

[left salmon]

Daily or weekly basis any limits to make swap?

[mystic zephyr]

Weekly

[left salmon]

Only 3 txn count to accept even if did multiple txn?

[mystic zephyr]

Yes

[left salmon]

Thanks for assistance 🙂

[open frost]

i need help

my tasks on the ambassordor program are not updating ie the twitter ones , also my reference points are not showing , kindly advise

[fickle escarp]

It takes time to update, can you provide me more details

[next walrus]

I registered, connected Twitter and Discord, but my missions are not counted. What did I do wrong?

[fickle escarp]

you did nothing wrong, it takes 24 hours for stuff to synchronize

[next walrus]

I connected on November 22

[fickle escarp]

So your tasks are still not synchronized, not even one?

[next walrus]

only trade on Helix 100 XP

[modern otter]

I think am having same issue have registered connected twitter and discord only discord xp show and connected buh twitter not connected

I have even linked and unlinked

[fickle escarp]

Noted

[modern otter]

Pls check Ur dm @mystic zephyr

[modern otter]

Can I drop my screenshot here too to show what I mean

[fickle escarp]

Yes

[modern otter]

U see on the left side u can see I have connected my twitter buh its not showing on the right side screenshot they only say completed on the discord own

[next walrus]

I don't have a Discord mission 😔

[fickle escarp]

Everything is going to be reported, dont worry. If you dont see it fixed on your end in the coming days, let me know

[next walrus]

Should I do something or just wait?

[fickle escarp]

For now, just wait as there is nothing you can do to fix it

[valid bluff]

Thanks for work

[next walrus]

I can't join the guild. Button don't work. gives an error message

[fickle escarp]

You have a pending transaction in your wallet. In order for another to be broadcasted you need to wait for the other one to be confirmed

[next walrus]

It gives an error after 2 clicks in a row. after one nothing happens.

[fickle escarp]

Can you try cleaning cache in browser and let me know if it fixes it for you?

[next walrus]

ok

[next walrus]

didn't help

[fickle escarp]

Do you have a pending transaction in your wallet?

[next walrus]

I tried it on 3 different computers

[next walrus]

no transactions

[fickle escarp]

I see, i just tested in on my end

I will report this issue

i have the same problem on my end

[next walrus]

Thank you

[acoustic wave]

bro do i wanna connect keplr wallet or metamask when i am doing testnet in injective?? we cant collect oat thru keplr from galxe?? i did teestnet on keplr collect oat on metamask do i need to do testnet also from metamask or is this allright?

[fickle escarp]

You need to use the same wallet address that you used in both places

in order to count the oats

[acoustic wave]

so i need to do testnet with metamask as well? i used keplr before cuz i dunno about that

[fickle escarp]

You can import from and to keplr to metamask, they use the same standard, therefore you can have the same address on metamask and in keplr

[acoustic wave]

but did testnet from keplr but collect oats from metamask what should i do?

[fickle escarp]

choose one wallet address and continue with it

you can always use the two if necessary

[acoustic wave]

ohh is it okay??

so if i can use 2 wallets then its allright

[fickle escarp]

Yes

[acoustic wave]

is there any rpc to add to metamask for injective?

[noble pelican]

Please tell me the procedure to send USDT from injective wallet to Metamask.

[fickle escarp]

You dont need to add injective network to metamask, you just connect to the dapps on injective and sign transactions through it. Please check the hub guide https://blog.injective.com/en/injective-hub-guide/

[fickle escarp]

You want to bridge your USDT from injective blockchain to Ethereum?

[acoustic wave]

okay thank you vm

[noble pelican]

Yes

[acoustic wave]

how can we find the inj address on metamask

[fickle escarp]

You cannot find it directly in the wallet, you can see it when connecting to the hub on injective. If you want to see it in a wallet you must use Keplr or Leap for example as they have native support for Injective

[acoustic wave]

okay i got it

[acoustic wave]

so how do claim oat ?? which chain should we switch?

[fickle escarp]

follow the instructions on the campaigns

Use the wallet that you plan to use for testing dapps

[noble pelican]

Yes.please tell me how

[acoustic wave]

okay

[fickle escarp]

You can bridge to ETH through the ETH bridge found on the hub bridge page - https://hub.injective.network/bridge/

The withdrawal fee to ETH is 10$

[acoustic wave]

another thing why this shows when i am already collect that early oat ??

[fickle escarp]

Also you need to keep INJ for gas fees

[fickle escarp]

What is this website?

[cold sequoia]

https://www.youtube.com/watch?v=SspkXnldqHc bridge video might help also

[acoustic wave]

exotic

[fickle escarp]

For access to third party dapps and for their campaigns please turn directly to Exotic markets in their discord

[noble pelican]

OK.Thanks!!

[fresh hinge]

cw20 USDT to bank problem

cannot convert it

[strong bobcat]

what error are you getting?

[fresh hinge]

dispatch: submessages: Adapter is missing balance to create a new token-factory denom: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '100956'

pls help me solve it, or any other way bridge back to ETH

[strong bobcat]

please clean cache and try again, also make sure to have enough INJ for gas fees

[lyric laurel]

Clear browser cache it might work @fresh hinge

[drowsy basin]

Ι make all twitter task but not verify this

[strong bobcat]

this is related to neptune finance, reach out to their discord

[deep jacinth]

for mito with keplr i get this message when claiming launchpad tokens "There is no chain info for injective-888"

[strong bobcat]

are you on INJ testnet network?

[deep jacinth]

yes

[strong bobcat]

I see, ty, please leave this feedback on #🚧｜early-access

[deep jacinth]

no access

[strong bobcat]

oh thats why then

only available for those with early access role

[deep jacinth]

one of my wallets has the ninja pass and other (keplr) was able to subscribe to the coin etc

[strong bobcat]

yea would need to sign with the one holding the ninja pass

[deep jacinth]

ok, thx

[fresh hinge]

1 inj should be enough right, clean cache and still not work

[unique schooner]

You can dm me screenshot and wallet address

[fresh hinge]

Done

[mighty ember]

i tried to bridge sol onto inj, then i got sol on my inj wallet. how do i convert these to inj?

[unique schooner]

Sorry I can't tell exact where but you can explore ecosystem here https://injective.com/ecosystem/

[mighty ember]

like how do i get rid of the sol and into inj

[open frost]

@strong bobcat My twitter tasks are not getting XPs in the daily tasks on the ambassodor program ? can you please advise

[unique schooner]

You can DM me your twitter account + wallet address

[open frost]

ok

[frozen mauve]

Mine blockbonus xp did not fixed yet

[mystic zephyr]

It will be, please wait for update

[frozen mauve]

Okkk mine xp 1000 5 days ago I am doing daily task but it's now showing 900 🫤🫤🫤

[stark ravine]

Why don't my rank and XP points change on the ambassador program dashboard? I create tweets every day, but nothing changes...

[fickle escarp]

it takes time to synchronize, usually up to 24 hours

still nothing is reflected even after days?

[fickle escarp]

You also need the warrior role

[stark ravine]

It's been several days...
How can I get the warrior role if my points don't increase?

[fickle escarp]

!warrior

[orchid robin]

How to become a Warrior?

Warrior is an entry-level ninja who has learned the basics. To become a Warrior:
1️⃣ Reach level 5 on Discord by participating in conversations
2️⃣ Add a Ninja emoji 🥷 next to your Twitter & Discord names
3️⃣ When you get the Warrior role for 1 month and feel ready, complete the Ninja Masters Application to level up your rank and become a Knight. You will need to provide a list of 🛠｜tasks you have completed: https://injective.typeform.com/ninjamasters

[stark ravine]

OK, I understand so... I'm only level 3
Thanks mate

[frozen mauve]

When fix block bonus xp @fickle escarp

[fickle escarp]

There are no set time frames on fixes, hope it is very soon

[frozen mauve]

Ok ser

[naive mauve]

I have an issue to bridge INJ token from Injective hub to Osmosis

[fickle escarp]

Which wallet are you using?

Do you get any error?

[naive mauve]

Kepler

Transcation failed also via IBC transfer in Kepler wallet

[fickle escarp]

let me test it on my end and if the node need synching i will report it

[naive mauve]

I have printscreen with error but it's not possible to post it here

[fickle escarp]

You can send it in a DM

I just successfully bridged OSMO from Injective to Osmosis

[naive mauve]

I did

[fickle escarp]

Do you use ledger with keplr?

[naive mauve]

Yes

[fickle escarp]

Ledger has an issue with bridge transfers at the moment, it will be fixed soon. At the moment you need to use Keplr withough ledger to bridge

[naive mauve]

How to bridge without ledger confirmation?

[fickle escarp]

You need to use keplr only, without ledger

if you want to bridge you can send your funds to keplr inj address that is in keplr and bridge from there

[steel hornet]

Does anyone experience loooong delay when bridge $SOL to injective network via injective hub ?

[fickle escarp]

It takes time for wormhole to synchronize

it always takes time

[steel hornet]

Thank you bro ,now it's like 2 days ,just wanna know everything is okey 🙏

[fickle escarp]

well, 2 days is a bit too much

Can you contact wormhole support and see what they will tell you

by delay i though 30-40 mins

[steel hornet]

Sure , I will contact them

[fresh hinge]

any admin can help ?

[fickle escarp]

Do you have enough INJ for the gas fees?

[fresh hinge]

1.48 inj should be enough?

[fickle escarp]

yes, more than enough

which wallet are you using?

[fresh hinge]

keplr and also try leap still not work same error message

[haughty rain]

Is the mito launchpad contingent on inj staking?

[fickle escarp]

What do you mean?

[fickle escarp]

Are the wallet settings left by default?

Also which coin are you trying to bridge back to ETH

[fresh hinge]

yep, if it can't convert wanna bridge cw20 USDT back to mainnet

I use wormhole bridge in but can't bridge out

[fickle escarp]

You can only bridge USDT back to ETH if that USDT was bridged from ETH bridge

You need to bridge back throug wormhole, the same you bridged that CW20 USDT from

Conver your USDT from CW20 to Bank, then go to the bridge and select the correct destination on wormhole

[fresh hinge]

but i stuck at convert

[fickle escarp]

you go to the wallet page on the hub and click convert on the asset https://hub.injective.network/wallet

[fresh hinge]

sure ser that's the way i do, but try more than 100 time not work

[fickle escarp]

So this error is when you try to convert unsupported token

from which chain did you deposit the token?

[fresh hinge]

https://wormholescan.io/#/tx/0x1c25b385404a95f6b833b5e39b33dcc38dbda34bc227a71ca8c4d31393f0e36f

[fickle escarp]

USDT through wormhole, now the issue is that it is unsupported on injective chain

[fresh hinge]

ETH mainnet

[fickle escarp]

The USDT on injective is bridge through Ethereum bridge, not wormhole

I have reported it to team, we will see if we can do anything

I will let you know

[fresh hinge]

ok ser thanks

[fresh hinge]

solved it thank you tell me what's the problem it is

[fickle escarp]

hey, i see that you have converted your USDT to bank, now you should be able to trade on helix or bridge back to ETH through the Ethereum bridge

@fresh hinge

[dense stratus]

Thank you Seranium

[woeful prairie]

where can i find link to the injective hub testnet site?

[fickle escarp]

https://testnet.hub.injective.network/

[frozen mauve]

Sir today block bonus result but 🫤 my xp showing 1000 to 700 now 1000 before 5 days now 700 xp

[frozen mauve]

N check my dm please 😶‍🌫️...

[fickle escarp]

Yes, we know

[frozen mauve]

Ok sir

[frozen mauve]

Check dm please sir 😶‍🌫️...

[deep lotus]

Hi! Sent some INJ to my wallet 4 days ago….it never landed.

I’m a novice but did a test first and that worked. This transaction never seemed to get passed the bridge. But what do I know? Hoping someone can help me track it down 🥺

[strong bobcat]

hi eddie, what's the txid from this bridge?

[deep lotus]

👋🏻

this is the transaction: https://etherscan.io/tx/0x3807244cae3e0cb2555b9cd85cf17676c25d930cd9cb75317abb7930fd220b71

you have a MM wallet with these 2 addresses. Not showing up as erc20 (coinbase) or bridge native.

0xc276729D2258d486fa8553BFd5603cc4FEe0f00e
inj1cfm898fztr2gd7592wla2cpucnlwpuqwc52d0h

Thx for answering the call OS

[strong bobcat]

with call you mean answering here right? careful with scammers dming

[strong bobcat]

what is the first bridge transaction that you say worked?

[deep lotus]

Yes I mean you answering here.

Unfortunately I learned about scammers DM’s first hand 🤬.

Thx for the reminder though

[strong bobcat]

are both transactions bridges? or you sent from coinbase to your address? please give more details

[deep lotus]

0xc276729D2258d486fa8553BFd5603cc4FEe0f00e

👆🏻test transaction

In both cases sent from my Coinbase to my MetaMask then bridge in the native token using the hub

• note. I had help doing this so am doing my best to explain. Apologies if I may get some terms wrong!

[strong bobcat]

all good, thank you for this

did you redeem both transactions on the hub? https://hub.injective.network/bridge/ are you getting any errors?

[deep lotus]

Redeem? I don’t think so.

The tokens aren’t in my MetaMask wallet.

[strong bobcat]

yeap, scroll down a bit and see the "claim wormhole tx" button, put the txid there and redeem

[deep lotus]

Done. I still don’t see it in my injective wallet. Where would I find it?

[strong bobcat]

should receive it directly to your INJ address that you used to bridge with

are you connected to the hub with that address? check on the "wallet" section on the hub

[deep lotus]

I’m in the wallet section of the Injective hub. Confirmed it’s the same address. Tokens aren’t there.

[strong bobcat]

what txid did you use to redeem?

i dont see any balances on the address you gave me above https://explorer.injective.network/account/inj1cfm898fztr2gd7592wla2cpucnlwpuqwc52d0h/

not even INJ

it's possible that you bridged to your INJ address interconnected to your Metamask

[deep lotus]

What do you suggest I can do if that were the case?

[strong bobcat]

clean cache and reconnect your metamask to the hub, then go to the wallet section

[deep lotus]

You mean clear my browser cache?

[strong bobcat]

yes

[deep lotus]

Ok. This may take a bit…

[strong bobcat]

not really, check the little padlock next to the URL, can clean cookies and cache there

[deep lotus]

Done! Reconnected MetaMask to the Injective hub, went to the wallet section, and still $0.

Dang.

[strong bobcat]

so what address did you use to bridge?

and what txid did you use?

[deep lotus]

My MetaMask 0x address - the same as before clearing the cache

0xc276729d2258d486fa8553bfd5603cc4fee0f00e

[strong bobcat]

You sent to this address, Then sent to MEXC. There's no bridge transaction here
https://etherscan.io/address/0x2be2b61b6a2c0822efc2fa4c2bcd65bfb034113b#tokentxns

[fallow matrix]

From the TxRestApi class ethereumContract.ts:257 Error: signature verification failed; please verify account number (147xxx2) and chain ID (injective-888): unauthorized error I am signing with ETH.Goerli and Injective.Testnet I share my line of code briefly

getEip712TypedData({
msgs: [msg, msg1],
tx: {
accountNumber: accountDetails.accountNumber.toString(),
sequence: accountDetails.sequence.toString(),
timeoutHeight: timeoutHeight.toFixed(),
chainId: "injective-888",
},
ethereumChainId: EthereumChainId.Goerli,
});

[strong bobcat]

What are you trying to execute?

Would you please give more details

[fallow matrix]

I create transactions over Broadcast with my web application and test contract

in addition, I use the metamask wallet

[deep lotus]

I did a straightforward bridge transaction on the Injective hub. Now it’s gone. Obviously I’m wondering what happened and how I can find my $$$

[strong bobcat]

Seems like you didn't use the official bridge. As you can see on your transactions, you sent to another address then that address sent to MEXC.

Nothing we can do about that

[strong bobcat]

Are you on goerli? Do you have testnet tokens to make transactions?

[deep lotus]

What is MEXC?

I did use the official bridge.

[fallow matrix]

Yes, I have testnet tokens, but I have a problem here, I could not see my testnet tokens on Metamask.

[strong bobcat]

Need to add goerli to your metamask and claim here https://testnet.faucet.injective.network/

[strong bobcat]

eddie, you sent your tokens to 0x2be2b61b6a2c0822efc2fa4c2bcd65bfb034113b then that address send those tokens to MEXC which is a CEX

here's the txid

https://etherscan.io/tx/0x3807244cae3e0cb2555b9cd85cf17676c25d930cd9cb75317abb7930fd220b71

[fallow matrix]

yes I did this I can see my testnet injs on https://testnet.hub.injective.network

[strong bobcat]

yes, can only see it on the hub

you only use metamask to sign transactions

[deep lotus]

I did use the official bridge. I don’t know how to explain how MEXC came into play. On Injective hub don’t even have that option

[fallow matrix]

yes I did not go out of your document on this subject, cosmwasm can work without problems

but I keep getting an error when publishing after signature with metamask

[strong bobcat]

blockchain doesn't lie, apparently you got compromised somehow. check the txid on your address, can also see it above

[strong bobcat]

I see, try asking on #🚀・dev-support

[fallow matrix]

oki thank

[deep lotus]

Can you help me get the money back? At what point do you see the compromise- before or after the bridge

[strong bobcat]

you didn't interacted with the bridge, can only see a transaction to 0x2be2b61b6a2c0822efc2fa4c2bcd65bfb034113b

sadly, there's nothing we can do to help you

[deep lotus]

Were the tokens bridged successfully or compromised before they were bridged. I was on the Injective hub and hit the bridge button.

I don’t think the chain lies, I just want to understand what it’s telling us

I know Injective has helped people get funds back in the past. Is that even possible in this case?

[strong bobcat]

not possible on this case

sorry

[haughty rain]

Do allocations increase depending on the amount of inj staking, as in this mito testnet?
Or, depending on the project, can I participate in the launchpad even if I am not staking inj?

[strong bobcat]

more details will be released in the future, but no, currently doesn't work like that

[haughty rain]

Ok thanks
And @flint arch dm me
please ban @flint arch

[warm inlet]

So i used the Injective bridge to bridge from Arbitrum to Injective. When I look at the transaction on Wormhole everything looks fine but nothing is showing on the Injective side. When I select "Claim Wormhole" and use Arbitrum and the transaction code I get an error. Is there another step I'm missing?

wormholescan.io/#/tx/0xb548f9c0c6e473e7514f97c410a01e0e42892f16cab457451a5567201b78137d?view=overview

[unique schooner]

You need gas fee

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[warm inlet]

Thanks, that worked. Really appreciate your help! New to Injective.

[karmic matrix]

I need support for two things.

1. Mitto missions participants is not active for my wallet. But I was engage with the Mito for long enough. So I'm not sure, why my wallet is not eligible
   My injective address: inj14tw6e4jv2t5ak8dg3qukrtjmpzpn63mz0ya5e2

2. I have trouble completing the Twitter task in the ambassador programme. I tried multiple times disconnecting the twitter and connecting back, but it still not complete

[unique schooner]

1. Unfortunately mito missions ended, you can ignore that task
2. You can dm me wallet address and X account

[karmic matrix]

I sent you a friend request because message sending is failing

[unique schooner]

Accepted

[karmic matrix]

Sent 🙂

[dire niche]

Running into a couple of errors when trying to set up a WHALE / USDT liquidity bot on Helix. With Manual setup option, error reads "price is greater than best buy price", even when my Min is set below current market and my max above current market. With Auto setup option, getting an error that reads "invalid tick spacing". Looks like the Auto is only setting Min and Max to the 0.02 decimal (vs. 0.018 or 0.022, for example). Let me know if either is user error!

[unique schooner]

Reported to team

[frozen mauve]

Why my xp decreasing I did 17+ missions now saying only 9????

[unique schooner]

you can dm me address

[frozen mauve]

Done

My xp was 1000 6 days ago now only 600 🫤😶‍🌫️

[unique schooner]

report to team now, thank you

[deep lotus]

Understood, but I’m trying to understand at what point in the process the funds vanished.

[high imp]

I try to connect my wallet to mito but i have this message "There is no chain info for injective-888"
U have a reason ?

[unique schooner]

You need to add Injective Testnet as a chain on Keplr -> https://chains.keplr.app/

[daring osprey]

Why is discord task completed but it says 0/2?

[mystic zephyr]

It takes time for update

It will be updated soon

[light bone]

guys.. the same for my.. I lost xp on injective bonus block. I have minimum 11 missions completed and right now I see only 6

[rotund orbit]

anyone experiencing Inj transaction issues on cosmo or keplr

[mystic zephyr]

What's the issue?

[rotund orbit]

Sending INJ to another address doesnt work the transaction is not broadcasted to the blockchain

[mystic zephyr]

You can DM me with more informations

i will try to help you

[rotund orbit]

Thank you Stefan for helping me with the INJ transaction its only an issue with Keplr

[rugged flint]

I have issues with connecting my Twitter/𝕏 account. I've connected, reconnected multiple times since 21st and it's not being marked inevitably stopping me from completing tasks

[fickle escarp]

It may take smoetimes more than 24 hours to synchronize, twitter api has limits

[rugged flint]

It's been so since 21st and it's not changing

[karmic matrix]

any update on this?

[fickle escarp]

We are working on improving it, please have some patience

[cinder stump]

have problems with this task claim . trying about 8 days

[cinder stump]

the same

[rugged flint]

Shouldn't the team fix it tho? I don't think it has to do with twitter API,

[daring minnow]

I think this has been reported and will be handled soon

[rugged flint]

Alright

[quaint jolt]

Thank you!

[fallen terrace]

You're being redirected to a couple that don't exist.

[fickle escarp]

Noted

[jade coral]

For some reason it says to me that I completed this mission, although I did not complete it. What could this mean?

[fickle escarp]

If you done an inj transaction it will count

[jade coral]

The fact of the matter is that I didn’t do it, although I remember that when I registered using Keplr, I made some kind of confirmation for $0.00. If this is what counts, then I should make new transactions to be able to become a Knight?

[fickle escarp]

For knight you need to apply

!knight

[orchid robin]

How to become a Knight?

Knight is an elite contributor to the Injective Ambassador Program. To become a Knight:
1️⃣ Reach level 7 on Discord
2️⃣ When you get the Warrior role for 1 month and feel ready, complete the Ninja Masters Application to level up your rank and become a Knight. You will need to provide a list of tasks you have completed, and provide the proof that you made at least 3 transactions on any dApp on Injective: https://injective.typeform.com/ninjamasters
3️⃣ Successfully pass the application process. Otherwise, you will remain a Warrior and can try again later (please wait at least 2 weeks before re-submitting your application)

As a Knight you will get:
1️⃣ Monthly rewards in INJ tokens based on your contribution
2️⃣ An opportunity to receive future airdrop rewards
3️⃣ Early access to ecosystem projects, and more!

[half hollow]

@fickle escarp its possible to check the relayers from INJ to CANTO? I have some tokens that are stucked…

[fickle escarp]

I will report it for a check

[half hollow]

thanks, bc I can't swap that on injective bc no liquidity

[deep current]

my rank isn't being updated

[manic sleet]

It takes time to update , so give it time and check back

[fallen jasper]

Is it now solved?

[clear finch]

Is the test hub not working?

[unique schooner]

what function on testnet hub?

I see it is online

[unique schooner]

please try with new wifi or new browser

[clear finch]

thx

[clear finch]

browsers do not help(

[unique schooner]

you can try with new wifi

[clear finch]

VPN helped )

[balmy ivy]

Bonus Block is broken AF

I was top 30 with a lot of on chain interactions and more than 20 completed missions, Now i have 7 completed mission

[unique schooner]

Please describe the issue

[unique schooner]

You can DM me wallet address we will check

[balmy ivy]

I DM you 3 times about this, but i'll do it again.

[manic sleet]

It takes time to synchronize

[manic sleet]

This is a connection problem

[open frost]

@unique schooner I have DM you about my twitter tasks not getting verified since i joined the ambassodor program , can you please assist me with it

[mystic zephyr]

How long ago did you do the tasks? How long do you wait for verification?

[snow trench]

!knight

[orchid robin]

How to become a Knight?

Knight is an elite contributor to the Injective Ambassador Program. To become a Knight:
1️⃣ Reach level 7 on Discord
2️⃣ When you get the Warrior role for 1 month and feel ready, complete the Ninja Masters Application to level up your rank and become a Knight. You will need to provide a list of tasks you have completed, and provide the proof that you made at least 3 transactions on any dApp on Injective: https://injective.typeform.com/ninjamasters
3️⃣ Successfully pass the application process. Otherwise, you will remain a Warrior and can try again later (please wait at least 2 weeks before re-submitting your application)

As a Knight you will get:
1️⃣ Monthly rewards in INJ tokens based on your contribution
2️⃣ An opportunity to receive future airdrop rewards
3️⃣ Early access to ecosystem projects, and more!

[open frost]

I do them daily and they haven’t been verified since I joined on 25 th November

Even my discord level tasks are not verified except 1 that is level 5 task

[mystic zephyr]

Let me see if it's already reported

if no, i will report

[open frost]

Thank you 🙏

[fallen jasper]

Alright

[clear finch]

Thank you, this issue has already been resolved)

[dreamy mica]

If I switch validator, Is there a time period (21 days, etc.) that I dont receive rewards?

[mystic zephyr]

If you re-delegating

you will start earn rewards from the new one

there is no period

only if you made unbond, then you don't receiving rewards

[dreamy mica]

Im currently delegating now, and want to switch validator and delegate some INJ to other validators, so there is no time period when unbond and "I will receive rewards as it is", right?

[mystic zephyr]

Yes, you will countinue to earn rewards

[dreamy mica]

thanks

[dreamy mica]

Is there a recommended validator?

[mystic zephyr]

You can ask in #💬・general

I can't recommend any validator

[waxen imp]

Their is 21 days to undelegate then received rewards? Right

[fickle escarp]

You dont receive rewards during the undelegation period

[waxen imp]

Ok only delegation period

[fickle escarp]

During the re-delegation period you receive rewards, yes

[waxen imp]

Ok

[opal monolith]

I want to buy $ARB on Injective. I don't see liquidity on Helix or Astroport. Is there any liquidity to buy $ARB anywhere on Injective? thx nINJas ❤️

[fickle escarp]

Unfortunately there is no liquidity for arb at the moment.

[opal monolith]

Ok. Hm. I only asking because I want to use bridge to ARB. and there only ARB token is possible as selection. This means the bridge to Arbitrum is useless at this moment in time?

[lofty ember]

Simple noob Q:

I have some INJ on injective hub. And I need to sell a bit to move to USDT on ETH.

Whats a sensible way for me to move a little INJ to USDT ERC20 ?

[fickle escarp]

You can bridge USDT back to ETH via the Ethereum bridge - here is the video guide https://youtu.be/SspkXnldqHc?si=7KFBB-gaKqpNgb2U

[lofty ember]

Ty! But how do I go from INJ to USDT in the first place, before I bridge?
Where do I swap?

[fickle escarp]

You can check exchange dapps here https://explorer.injective.network/featured-dapps/

[flat nest]

I have been trying to bridge/withdraw my funds from my Helix account to polygon but just can't see my funds on the bridge interface

[fickle escarp]

Which tokens are you trying to withdraw to Polygon?

[flat nest]

Wmatic

[fickle escarp]

You should see it when you go to the bridge page and select the Polygon bridge. Make sure to select the bridge to be Injective to Polygon, not Polygon to Injective in order to see your funds

[lofty ember]

Guys my coins on INJ network are stuck due to no gas, I have USDT but no INJ.
I cant buy any INJ on injdojo b/c no gas.
I tried https://inj.supply/ to get gas, and it didnt work ("error").
Any suggestions?

[fickle escarp]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[fickle escarp]

try the other faucets

[fickle escarp]

are you connected with the correct wallet on the hub?

[lofty ember]

https://hub.injective.network/bridge/ is not working for me.

• sending USDT to ETH
• I have 1.39 INJ which I figured should be enough for fees and gas?
• but button at bottom just sasy "get free INJ", it never lets me withdraw

[lofty ember]

Could I also do this by moving from INJ -> Cosmos -> ETH ?
As the INJ Bridge doesnt seem to like me using 2 wallets.

[lofty ember]

Like whats the best bridge on cosmos ecosystem?

[flat nest]

I honestly have no idea what is going on. Just saw that the address showing on IH is different from my Helix address so I disconnected and reconnected MM and Keplr and still a diff address is showing on IH

[lofty ember]

This is becoming urgent... Hoping withdrawing from INJ is properly supported scenario ;D

[fickle escarp]

1.4 INJ is more than enough to cover the gas fees

Can you clean cookies and see if it will change

[lofty ember]

Unfortunately I cant afford to clear all cookies on my main browser. To many useful cookies.
Could I sent my USDT to a more mature Cosmos-ecosystem bridge first, instead of ETH mainnet? And then from there to ETH-mainnet
What is a more mature Cosmos-eco bridge I could send my USDT to?

[fickle escarp]

You can clean cookies only for hub

I can bridge with 0.3 INJ in my wallet on the ETH bridge on the hub

[lofty ember]

Ok I was able to clear cookies for just that site.
But the issue persists: button only reads "get free INJ for gas", it does not allow send.
My sense from using other bridges: its getting confused between the wallets, wants to find INJ gas money in my secondary wallet (Metamask) and thus saying I need gas money.

[fickle escarp]

Which is your main wallet?

[lofty ember]

But Ive tried many, many times with same result.
Is there a more mature cosmos bridge that I could get to with Keplr, and then from there onwards?

[lofty ember]

INJ in keplr, want to send INJ.USDT to ETH.USDT, which is metamask

[fickle escarp]

You need INJ in the metamask inj address in which you have your USDT

you dont have inj for gas fees basically

Just send 0.1 INJ to the metamask inj wallet address

and it will work

[lofty ember]

Ty, Please let me confirm:
In Keplr: I have 1.39 INJ and 1k+ USDT, all on INJ network
I want to send USDT to ETH mainnet (metamask wallet)

You are saying I need INJ in my metamask/ETH mainnet?
That seems odd to me.

[fickle escarp]

You have 2 different wallets connected

You need to have the funds in the wallet that you are going to bridge with on the Ethereum bridge

You can import keplr to metamask and vice versa if you want to have the same wallet in both

So you can bridge with ease from the eth bridge

[lofty ember]

Ser, what is "the eth bridge"? Is that not hub.injective.network/bridge/ ?

[fickle escarp]

This is the ETH bridge. INJ to ETH etc..

[flat nest]

So I cleared cookies and reconnected Keplr and the correct inj wallet showed up as seen in the first screenshot .Then I connected my MM and a different inj wallet appeared as seen in the second screenshot. This one is not my wallet and I have no idea how or why this is happening. What's going on

[lofty ember]

Is the ETH address a regular ETH address? Starts with 0x ?

[fickle escarp]

You are connecting two different wallets, its normal to have 2 different addresses show up

[flat nest]

Yes

[fickle escarp]

If you want to have the same address in both wallets you need to import Keplr to Metamask or vice versa

Import the address that you have the funds on

[flat nest]

You make it sound like it's somehow my fault. I have been using inj and Helix for months now and never experienced anything like this

[fickle escarp]

I am not writing to you

I am trying to explain in clean words as to why it is happening

[lofty ember]

@fickle escarp you said we could somehow "import keplr to metamask" and vice versa -- can you give pointers on this?
Would this simplify the process?

[fickle escarp]

Of course, I will explain in a few minutes

[fickle escarp]

Both wallets support the same standard. You can take your 12 words from any of those wallets and import to one of them when creating a new wallet.

You import the 12 words when creating a new wallet.

When you do that you will have the same address when you connect to the hub.

Metamask doesn't support cosmos bsed chains so you won't see inj in it. Only when you connect to dapps like the hub. Metamask uses eip-712 to achieve signing on injective blockchain while eth is selected.

Once you have your correct wallet imported you will be able to bridge with ease to ETH. Keep in mind that the withdrawal fee to ETH is fixed at 20$.

Let me know if you have more questions.

Here is the bridge guide just in case. https://youtu.be/SspkXnldqHc?si=Cf5EJVbvbVeUvcGW

[shut solstice]

Bridged over polygon and getting error when claiming with TX

[fickle escarp]

This is the synchronization error, try again in a few minutes

[shut solstice]

now getting this error

[fickle escarp]

You don't have inj in your wallet for gas fees

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[shut solstice]

received faucet gas now getting this error

[grizzled arrow]

How do I get more INJ tokens to stake?

[fickle escarp]

DM me your address

[pulsar elbow]

I started staking 2yrs ago and did a 'set it & forget it' type of action with my INJ Bridge/Stake - Just revisited my position & I noticed I've had this pending transaction for over 2yrs - @fickle escarp @mystic zephyr - Thoughts????

[fickle escarp]

This is a UI bug, you can ignore it

[grizzled arrow]

@fickle escarp I did, and also now I have a transaction waiting to be "redeemed" in wormhole but it's not letting me

[strong bobcat]

are you getting any errors?

[grizzled arrow]

Yes

[strong bobcat]

what error?

[strong bobcat]

do you hold any INj to claim?

[grizzled arrow]

I did a faucet thing and gave me 0.01 or something

[strong bobcat]

should be enough, seems like your keplr settings have a wrong gas set

[grizzled arrow]

I can't get any more it seems I wanted to swap for some but can't do that either

[strong bobcat]

please clean cache, refresh and try again

[grizzled arrow]

Can I fix it?

I'm using the Crypto.com defi and metamask app on Android, not sure how to clear cache on those

[strong bobcat]

it says you are using keplr?

[grizzled arrow]

I have no clue what that means

[strong bobcat]

can you please try by using Metamask explorer

[grizzled arrow]

I don't have a PC available right now

[strong bobcat]

metamask mobile has an explorer, please use it to prevent these errors

[grizzled arrow]

I am

[shut solstice]

@strong bobcat This is still unresolved.

[strong bobcat]

need to use ETH network

[grizzled arrow]

I did both

[strong bobcat]

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[strong bobcat]

please use one of these

[shut solstice]

I did

[strong bobcat]

whats the txid?

[grizzled arrow]

I'll dm to you

Done

[shut solstice]

I have recieved faucet but am still getting this error when claiming tx

[strong bobcat]

whats the xtid and where did you bridge from?

[shut solstice]

Will DM

[dreamy mica]

I used bridge on hub and sent 1 ARB from arbitrum to Injective but did not receive. Who can help please?

[strong bobcat]

need to claim the txid

make sure to have some INJ for fees

[dreamy mica]

I did but nothing happened

can you please check? I can send you all info...

please check DM

[strong bobcat]

alright

[night spire]

i sent Matic from polygon using the bridge on hub, and redeemed, but i cant use this WMATIC, and when i try to convert to BANK to try to trade it for INJ i get this error "rpc error: code = NotFound desc = account inj1pcadem4lgq2q9tv9t94e9g288vya0zq0gs5xqf not found: key not found". This is the address i received connecting my metamask.

[unique schooner]

You need a little inj to cover gas fee, you can use faucet

!faucets

[orchid robin]

Faucets for INJ tokens

Receive a small amount of INJ, enough to make 1-2 transactions.

• https://inj.supply/
• https://stakely.io/en/faucet/injective-protocol
• https://bwarelabs.com/faucets/injective-mainnet

For Testnet use: https://testnet.faucet.injective.network/

[night spire]

worked, ty

any idea how i change this WMATIC now for INJ?

i found it

[shut solstice]

I have same problem as above when I click convert bank I get an error invalid parameters.

[unique schooner]

Hi, same problem as above, what problem you referring to?

[shut solstice]

i have wmatic and I want to convert it. when I click on convert to send to bank module I get the above error in my previous message

[unique schooner]

reported to team

[sand surge]

Hey, when you click convert, it's in your bank already

[next vessel]

I'm trying to bridge from INJ to Osmosis and my transactions keep failing, via the bridge or IBC transfer

[mystic zephyr]

What's the issue?

Do you see some error on UI or?

[next vessel]

on IBC i recieved a "transaction failed" message

via bridge i got a long string of code

[mystic zephyr]

Do you use Ledger/Metamask maybe?

[next vessel]

I use Kepl3r and Ledger, is that the issue?

[mystic zephyr]

Yes

right now, that is known issue. If you want to make IBC bridge, you need to be connected only with Keplr/Leap wallet on the hub

without metamask/ledger

it will be fixed soon

[next vessel]

are there any work arounds with other chains?

[mystic zephyr]

At the moment, you can't make only IBC transfer with these wallets

other bridges works fine

[next vessel]

Thank you, have a great day!

[daring yoke]

on bonusblock my missions not completed yet,even i have 16 level on discord and i also invite 3 users < inj1u63zq4n2m2xn88w25chdjrvnfndq943wkeufj6 >

[mystic zephyr]

Reported

[tropic minnow]

How to get faucet?

[mystic zephyr]

https://inj.supply/
https://stakely.io/en/faucet/injective-protocol
https://bwarelabs.com/faucets/injective-mainnet

[tropic minnow]

Thanks

[shut solstice]

No I dont see them and im getting an error when I convert

[grizzled arrow]

My transaction is stuck in process. It's in limbo.

[fickle escarp]

Can you give me more details

[grizzled arrow]

What do you need to know? Can I dm you?

[fickle escarp]

What type of transaction, bridge transaction etc..

[grizzled arrow]

I sent a dm, you got it?

[brazen tree]

where can i get help about mito missions launch supporter galxe OAT ?

[fickle escarp]

It has ended

[grizzled arrow]

Did you get my DM?

[fickle escarp]

Yes

[brazen tree]

yeah i know that but i am talking about galxe OAT not mito missions

[grizzled mica]

these ones ?

[shut solstice]

So I am still stuck converting my CW20 in my wallet to the bank module. I get an error.

[fickle escarp]

Do you have enough INJ for the gas fee?

[shut solstice]

0.01 inj

[fickle escarp]

Can you DM me your INJ address

[swift gyro]

I was staking $INJ and unbonded some. The unbonding period ends on December 2nd, but doesn't specify a time. Does anyone know if it's UTC time? I'm surprised there isn't a countdown timer that begins counting backwards from hours once there's less than a day remaining

[manic sleet]

Once it complete 21days from when you unbond it will be unbonded ..

[calm swift]

It takes 21 days for unbound

[crude wasp]

It'll specify time once it's the last day of unbonding.

[cobalt pike]

almost an hour ago using inj transfer , I send some inj to my binance account from my wallet, but mistyped memo. now cant locate the inj I send.I cannot find txid , any idea?

[fickle escarp]

You need to contact binance support and explain and provide trx hash which you can find from here https://explorer.injective.network/

[cobalt pike]

will do 🙏🏻

[swift gyro]

It doesn't, which is weird. That's why I was asking

[crude wasp]

When it'll be less than a day (tomorrow), It'll show.

[swift gyro]

haha no it's been at 1 day for 12 hours now

[crude wasp]

Dude, just wait?

[swift gyro]

i technically unbonded 20 days and 4 hours ago

[swift gyro]

Ummm..yeah I know. I'm asking because I am waiting for these funds to clear to process and transaction and wanted to let my counterparty know when they can expect them....seems pretty simple to have a precise timestamp of unlock rather than a whole 24 hour peruid

[crude wasp]

Gotta be patient 🙂 You can also check on the explorer.

[swift gyro]

yeah it's just a silly oversight

super super easy thing to provide/fix

[valid summit]

Does this mean while staking with them they are taking 100% commission or all my rewards?

[unique schooner]

Yes you can't earn yield if validator have 100% commisson

[valid summit]

Appreciate it. What’s the point in staking with them if they take 100% commission. Just lock up my money to get nothing back is silly

[unique schooner]

This is entirely up to you. You need to do your own research and here are some tips for help:
Pay attention to the Commission rate. If you delegate to a validator with 100% commission, you will get NO rewards.
Delegate to more than one validator in order to diversify your holdings to hedge your risk of slashing.
Get some other background details such as uptime, a record of voting, social status and support from the community.

[elfin tulip]

So inj is already on metamask

[unique schooner]

Yes you can use metamask on Injective ecosystem

How to create an Injective wallet https://blog.injective.com/how-to-create-an-injective-wallet-2/

[elfin tulip]

Okay thanks am going to do so now

[elfin tulip]

It's already on kepler

[unique schooner]

Keplr is okay

[elfin tulip]

Okay thanks

[cursive robin]

ı bridged with portalbridge arbitrum to injective ETH. it is coming ETH C20. after ı press convert button. it says dispatch: submessages: Adapter is missing balance to create a new token-factory denom: execute wasm contract failed [!injective!labs/wasmd@v0.40.0-inj/x/wasm/keeper/keeper.go:394] With gas wanted: '50000000' and gas used: '89778'

who help me

@fickle escarp

[fickle escarp]

ETH or wETH? Also do you have enough INJ for gas. ETH deposit through wormhole is not supported, I recommend to bridge back

[cursive robin]

it is not working brigde back

gas is ok. it is ETH CW20

@fickle escarp

convert is not working

[fickle escarp]

Yes, normal as its not completely supported

You can try again but those assets are not supported from wormhole, on the UI there are also no options for them for a reason

[cursive robin]

why conver doesnt work

[grizzled mica]

I think you may open the ticket in their discord

[cursive robin]

convert is in injection wallet

[fickle escarp]

Do you have enough inj for gas fees

[cursive robin]

yeah

[cursive robin]

ı send you tx from dm

[cursive robin]

could you check it @fickle escarp @mystic zephyr

[cursive robin]

convert is not working? when you fix it?

[fickle escarp]

Please give me some time to get more information on it

[cursive robin]

ok

[fickle escarp]

Do you have INJ for the gas fees?

[cursive robin]

yeah ı have 1.48 ınj

[jade coral]

I received the OAT, how quickly will the role arrive on discord?

[fickle escarp]

Maybe a few minutes

[jade coral]

I am waiting

[jade coral]

It so happened that I was able to decrypt OAT, but only it gives me an error

[unique schooner]

Please reach out to galxe support team, they will check

[jade coral]

The fact is that they require a transaction hash, but there is no hash. Can someone tell me where I can find the Galxe transaction hash??

[fickle escarp]

Depends on which chain you minted

[grizzled mica]

Polygonscan has not been stable lately. The issue could be from either polygonscan or blocksync.
The transaction hash from the claim is not valid

Wait 2-3 hours and you can claim again

[jade coral]

PolygonScan decided to work unstable exactly when I decided to complete tasks in Galxe

[grizzled mica]

it is what it is
patiently wait

[tribal crystal]

guys, I got 10 lvl in Discord, but they didn't give me XP

I also don't get any XP for posting on Twitter.

[strong bobcat]

yea it's wrongly labeled, you get the xp when you get knight, we will be doing some changes to display it differently

[tribal crystal]

ok, thanks a lot for the answer!

[rustic drum]

I am trying to connect my metamask wallet to Guild. When I click metamask, it shows my Eth address, but it is greyed out and I cannot proceed. Anything I am missing?

Never mind. Once I clicked on Privacy Policy, it saved

[unique schooner]

Source wallet is keplr?

[hazy zephyr]

@fickle escarp / @unique schooner help dis fellow

[unique schooner]

Replied to him

You can DM me both addresses i will check

[hot cape]

@unique schooner sent the request

[cursive robin]

@mystic zephyr

[mystic zephyr]

What's the issue?

[cursive robin]

I wrote from dm

[modern juniper]

I was trying to swap some ATOM into INJ so bridged my ATOM to Injective, but now find there is no swap page to do this. I've tried to bridge the ATOM back to Cosmos, but keep getting failure messages. Is there a page somewhere that will allow me to just swap my ATOM on Injective to INJ?

[mystic zephyr]

Can you check on helix swap page? https://helixapp.com/swap/

[modern juniper]

I'll check it out. Thank you.

[real onyx]

How do I swap my INJ BSC to the native so I can stake it?

[fickle escarp]

There is no BSC bridge to injective, you can use Binance for example to deposit on BSC and withdraw on Injective directly

[real onyx]

I don’t understand. So since I purchased the BSC version I cannot stake unless I sell it nd get something else?

[fickle escarp]

No, you can deposit BSC INJ in Binance, then you can withdraw INJ on injective blockchain as native directly

[real onyx]

Sorry for y slowness, are you saying that I need to take my BSC INJ, deposit it in Binance.US and then I can withdraw the “native” version on INJ without having to sell or swap it? Sorry I am a bit slow.

[fickle escarp]

I am not sure if Binance has support for native INJ withdrawals as I dont use it as I am not from the US. You can check if they have support for injective blockchain.

Otherwise what you are assuming is correct, you dont need to swap, sell or buy anything. You just deposit and withdraw, you withdraw just on another blockhain, the same tokens you deposited. Although double check if binance US supports injective blockchain

[real onyx]

Okay, so in the future I should avoid the BSC version since it seems to make this much harder. I will try this thanks

[fickle escarp]

Yes, correct, if you want to utilize INJ to its fullest, you need it on the injective blockchain

[real onyx]

But IJN has a “converter” for all the other blockchain versions of this token except BSC, correct?

[fickle escarp]

There is an ETH brdige which can be used for bridgein ERC-20 INJ to native INJ

[real onyx]

[willow oyster]

ples

please i cannot claim my early supporter nft on galxe

[fickle escarp]

Please contact galxe for problems with galxe

[willow oyster]

okay

[grizzled mica]

Polygonscan has not been stable lately. The issue could be from either polygonscan or blocksync.
The transaction hash from the claim is not valid

Galxe team is also aware of this and working on it
Thanks

[willow oyster]

okay thanks

[grizzled mica]

You’re welcome

[keen dune]

Anyone know if Rabby wallet supports native $inj token?

When i try to bridge erc20 $inj, there's a mm fox icon next to inj address, but the eth address matches my rabby wallet address.

Has anyone tried bridging using Rabby? Just want to get confirmation before i try bridging a small amount.

[vocal hawk]

I have INJ stuck in the Wormhole bridge coming from Ethereum. Under history at https://hub.injective.network/bridge I can see the stuck transaction where I can select Info. Also above that is a button that says "Claim Wormhole Tx". When I click Claim Wormhole Tx, a new window opens that asks for the transaction hash. To locate that, I went back to "Info" in transaction history which opened the "Transaction In Process". window. At the bottom of that is a link that says "View on Etherscan". I then opened Etherscan with the link, copied the Transaction Hash. Then I clicked in Calim Wormhole Tx again and pasted the hash in the Redeen Your Funds window that opens. But when I select Redeen your funds, nothing happens.

[strong bobcat]

don't think so, best to use one of the recommended wallets on the hub

[strong bobcat]

hi doug, did you bridge from ETH to INJ?

[vocal hawk]

Yes, it shows my Ethereum address as the deposit address in the history.

[strong bobcat]

do you have INJ for gas to redeem the transaction?

[vocal hawk]

Yes, on Injective I have a lot of INJ.

[strong bobcat]

I see, please clean cache and try to claim again

[vocal hawk]

Still does nothing when I hit Redeem.

[strong bobcat]

make sure you dont have any pop ups on your Task Manager

[vocal hawk]

BTW, I'm using an iMac.

[strong bobcat]

should work with iMac, it just seems like you are not getting the prompt from your wallet

are you using chrome?

[vocal hawk]

Yes, always use Chrome.

[strong bobcat]

would you please share the txid? on dms

[vocal hawk]

Did you get my DM?

[strong bobcat]

Yes

[timber tinsel]

anybody knows how to add ninja emoji to profile?

[civic socket]

It automatically adds since you in injective DC

[timber tinsel]

🙂 thx

[civic socket]

Glad to be of help