3D Printing Shrine

[hollow fiber]

im getting a hole drilled through the wall for proper ventilation soon enough

[grand void]

bros destroying his house for 3d printing

thats dedication

[lapis nova]

real

[grand void]

peyton and cater are the exact opposites. One is literally drilling through his outer wall for ventilation while the other has no ventilation at all and breathes in every fume there is

[lapis nova]

the room my printers are in has vents

in and out

[hollow fiber]

we already have similar stuff for our kitchen extractor

simple enough job :P

its also just cuz having window open is cold

[grand void]

im no better, i also drilled a hole through the wall to wire up a cctv cam

[hollow fiber]

i just yearn to use my printer at any time

with no cons

p1s would be enclosed and properly ventilated to use whenever its great

[hollow fiber]

https://64.media.tumblr.com/004efc681b273bdfbda286b0141165b4/941b37f09afc69e9-7a/s400x600/5defc1b1149e269419c7eaec73741f6155448f6d.gif

[lapis nova]

yes

[grand void]

its definitely an upgrade to your current a1 tent lol

[hollow fiber]

hey man if it works it works

but itd just be a lot more easily workable with a p1s

way smaller too 😭

its my birthday soon maybe i ask parents for a little funding 😊

[hollow fiber]

its either £480 for a new p1s combo or £4-450 for a used one + travel cost

its worth just going new right?

sure like if im lucky 400 for a combo but also its gonna be used so probably 500+ hours + normal wear and tear
travel gonna be like 30 more than likely so it's only 50 extra

@grand void or @lapis nova i forgot who mentioned the new ams

its only 80 extra

what new ams do

be chatgpt for me

what???

that would make this p1s be 130 total - the ams price 😭

150 extra to upgrade to p2s

[grand void]

new ams has built in dryer

its pretty great to always have 4 spools dried up and ready for printing

[hollow fiber]

ah is that all?

[grand void]

i believe so

[hollow fiber]

hmmmm

[grand void]

maybe some improved internals but the general function is the same

[hollow fiber]

probably worth the extra 80 then

current dryer was 50 and only does 2 rolls

so ill just bundle that in with the printer when i sell it

[grand void]

a good 4 spool dryer is already worth 100+ euros so defini worth it

[hollow fiber]

i hate how big printers are now cuz i cant really ship it anywhere easily

just gotta slap it on fbmp

and hope

[grand void]

yeah returning my kobra 2 max was a nightmare lol

you could ship the a1 if you still have the original packaging

[hollow fiber]

i got it used

i have the a1 mini box though

dimensions are really similar

[grand void]

i cant really imagine that the a1 fits in the minis box, especially since the Z axis has to be disassembled and stored too

[hollow fiber]

oh ya i forgot

rip

[grand void]

man im actually stupid. My PETG prints just kept warping off the bed like crazy. Brim, cleaning or higher temps didnt help at all. Turns out i loaded ASA without realizing and selected it as PETG in the Ams

shoutout to my cool plate tho cuz even at 60 degrees bed temp for ASA only the corners warped

[random coral]

q

[lapis nova]

💀💀💀

even I wouldn’t do that

[grand void]

To my defense, both spools look exactly the same and the only difference is a small asa sign on the side which can’t properly read from a normal distance cuz terrible eyes

They also both have a glossy black finish

[lapis nova]

[grand void]

new printer day

im also kinda worried about my skadis filament rack

its really strong but also needs to hold about 12kg of filament

[hollow fiber]

@lapis nova

fun peli stuffs

[lapis nova]

I should do this

I was gonna

[hollow fiber]

took like 5 mins to model

pretty sick

[lapis nova]

Ye

[hollow fiber]

only 20 mins left

will update soon

[grand void]

shouldve made it in a nikon yellow instead of white

[grand void]

holy shit

i printed a top spool mount and during this print it failed, causing the whole hotend to rip apart

i guess that teaches me to never fully trust a printables model lol

[random coral]

💀

[grand void]

kudos to the anycubic engineers tho cuz only the hotend died and everything else is totally fine

[lapis nova]

gg

[grand void]

@lapis nova

[lapis nova]

🤑🤑🤑

Hell yeah

[lapis nova]

💀

[hollow fiber]

what was the thought process of this one tho

[lapis nova]

Yes

[grand void]

want a second printer

and a1 mini cheap

[naive forge]

Wild

[grand void]

@lapis nova have you bought the exhaust fan kit for the p2s? Or did you notice any issues regarding smells during abs printing without it?

[lapis nova]

I haven’t printed ABS with it

Or bought exhaust fan kit

[grand void]

oh i forgot that you didnt care at all about air quality and your health

[lapis nova]

Real

[hollow fiber]

you need to seal it with insulated tape

afaik

ive looked into it quite a lot

almost all of the proper setups are covered in that shiny tape

[grand void]

yeah thats a possibility but the p2s just circulates the warm air inside through the filter without actually exhausting it. So if i completely seal it, the polluted air will just stay trapped inside

and escape once i open the front door

[hollow fiber]

ye thats what exhaust kit is for

sealing is just to direct it outwards

not sealed too well ofc it needs to pull air from somewhere

[grand void]

it can pull air from underneath where the auxiliary fan is mounted

[grand void]

from my experience with the kobra s1 just having the exhaust fan is enough. My HEPA Filter was looking quite dusty after only a couple of weeks

[hollow fiber]

yeah if i went p1s id likely just not use the filter

its a disposable part i wouldnt want to buy

and my system is being fully exhausted outside anyway

[naive forge]

I mean TBF, ABS and ASA release such little fumes and VOCs while printing that it's not a major health concern unless you have existing medical conditions

[naive forge]

ignore all the gaps and holes

Will say though, HEPA fairly useless for this, so is the tiny activated carbon filters

[grand void]

yeah i guess that filtration system from the h2d pro would be more useful but i found the HEPA helpful to keep some of the grime inside the printer. After 2-3 weeks of using one it has already turned a lot darker

[grand void]

it doesnt matter yeah. The room is big enough and well ventilated + im using an air purifier

[naive forge]

without going into a whole thing, air purifiers tend to be fairly useless, so do the tiny filters that come with most printers, only sure way to filter typically starts at around $600, ventilation is the cheapest and usually easiest way to deal with it

[hollow fiber]

get that shut straight outside

no worries of air quality

easy

[grand void]

so that means my 1000€ dyson air purifier has to be good?

[naive forge]

Good as in over priced? Sure

But there is a reason the purifiers needed are 5+ filters

and are a box

[grand void]

yeah understandable. As I cannot drill a hole in my wall to get proper ventilation, I just need to cope with opening the windows from time to time. The printers are in a separate room as well anyway

[naive forge]

You got windows, just use that, they make plenty of things that can seal the gap and leave a space for like a 4" duct or something

[hollow fiber]

yeah thats the easiest solution

either get a pre made solution or print something to seal the gap while the window is open

or just drill a hole and pray the house doesnt fall down 🙏

[grand void]

the house is from 1780 so theres a chance it will

[hollow fiber]

50/50

it either does or doesnt

im getting a hole drilled through my wall once the rain stops being so constant 😭

[grand void]

do it while its raining to see if theres a proper seal

[lapis nova]

or just dont be weak

smh

[hollow fiber]

im gonna print some asa gaskets and silicon it onto the house

hopefully good idea?

[grand void]

dunno but should be fine if it seals tight. British winters are cold and i assume you dont want cold in your room

[hollow fiber]

some metal mesh on the outside and a drop in cover for the inside

[hollow fiber]

ideally not no 😭

[grand void]

no mesh and see what insects you can catch in your printer

[hollow fiber]

but thats why im gonna make the drop in thing to block everything up when i dont need to use it for a long time

[hollow fiber]

stickbug vs 300c nozzle

[grand void]

@lapis nova

[lapis nova]

🔥🔥🔥

[grand void]

you dont have the left auxiliary cooling fan by chance?

[lapis nova]

I do not, no

Haven’t seen a need for it yet

[naive forge]

aux fan hot shit 😄

99% of people don't use it right and it just leads to more warping issues

[grand void]

@hollow fiber quick buy that totally real p1s offer

[grand void]

yeah thats exactly what everyone was complaining about lol

[lapis nova]

i printed the fan deflector or whatever cuz all my keychains were warping

[naive forge]

Can also set fan speed to 0

[grand void]

peyton be printing nylon with 100% fan speed

[grand void]

im not sure if i ever asked but which printer do you own?

[naive forge]

H2s, x1c, a1m, then a random cheap klipper printer

[grand void]

since the p2s and h2 series have the same hotend, did you ever try if they fit on the a1m? Im seeing conflicting reports. In a video they fit but on the internet most people say they dont

[lapis nova]

sure but whatever

[lapis nova]

they do not

they’re longer than a1

[grand void]

not something an angle grinder cant fix

[hollow fiber]

seeing as one is placed higher than the other i am not surprised

[hollow fiber]

fuck p1s

a1 goat

[lapis nova]

real

[grand void]

does your a1 still have that weed grow tent

[hollow fiber]

yes

i would go p1s but now im on the verge of 180-400 1.4x

[grand void]

shouldve diy‘d a case by just buying the p1s panels + door

[hollow fiber]

😭

[grand void]

werent you on the verge of 120-300 like 12 hours ago

[hollow fiber]

nah that was a few months off

but 180-400 1.4x is over £1500 cheaper and ive realised its also probably a much better range

cuz im always near the tele end of 200-400 anyway

[grand void]

180-400 but at 2.8 would solve all the worlds problems

[hollow fiber]

basically as soon as my 200-400 sells im buying it

[charred ferry]

how come I only found this now damn this is yet another nerd corner i am joining

[grand void]

you have to make it public which printer you own

if its not bambu then youre out

[random coral]

https://giphy.com/gifs/meme-random-kid-zws30uN4Q0t3Pyj0oD

[lapis nova]

teehee found new gas

[charred ferry]

gonna be getting bambu lab a1 mini, although maybe ill just get the A1

only starting with 3d printing

the issue is i have no fuckng idea where ill put this thing

my room is getting filled with all my hobbies and gear

[grand void]

if you can make space for the a1, id just get that. For only 70€ more you get a much larger build volume

[grand void]

I dont know whats going on but every single AMS is completely sold out everywhere and is on backorder for like 2 months lol

[naive forge]

christmas fucks em over for the first 2-3 months of the year typically

Though there is a non 0 chance they are trying to phase out the OG AMS

[grand void]

even the ams ht was completely gone within 2 days at a 3rd party seller lol

[naive forge]

not shocked on that one

[grand void]

whats your opinion on that one?

[naive forge]

It's fine

If you want an AMS featured dryer sure, if your goal is just a dryer then don't bother

[grand void]

I have managed to find a local seller who has a couple of ams 2 pro in stock so i ordered it there

[hollow fiber]

lets go?

external vent completed

@lapis nova

can now print whenever

[lapis nova]

skull

[hollow fiber]

this is fire bro

[lapis nova]

exhaust for your weed grow tent

[hollow fiber]

yes

[lapis nova]

schedule 1 reference

[hollow fiber]

me can now print whenever

very goated

[lapis nova]

I could already do that

clanker

[hollow fiber]

you spend lots for enclosed printer

i spend like 20$ for ventilation

[lapis nova]

even with not enclosed printer

[hollow fiber]

cuz retarded

and breathe fumes

[lapis nova]

nuh

$15 for 10 roll filament

very smart

[hollow fiber]

bro got recycled sprite bottle filament

[naive forge]

I plan to spend like 3-400 on venting lol, but I'm making a whole setup with an adjustable booster fan for several printers

[hollow fiber]

i just needed an external vent so i can print with windows closed

[lapis nova]

nah elegoo

[grand void]

elegoo filament kinda cringe

[grand void]

lets go until moisture starts to creep in and you end up with mold on your wall

[hollow fiber]

weve had the same vent for the kitchen for about 10 years with no issue

i trust it

its sealed and only opens when the fan is on

[grand void]

good stuff i used elegoo in the beginning but switched to jayo. Do these cardboard spools work properly in the ams or did you print the adapter

[hollow fiber]

how free

[lapis nova]

idk lol we will find out

[lapis nova]

yes

[grand void]

i recently bought a new plate for pla which doesnt need any heat at all and works great

saves some power

[lapis nova]

biqu?

[grand void]

no some aliexpress brand

but theyre quite popular

[hollow fiber]

@hazy kettle what is free code

[hazy kettle]

doesn't work in UK

i tried

[hollow fiber]

sadge

[naive forge]

smh

[lapis nova]

🔥

[grand void]

managed to make some space to put the ams next to the p2s instead of on top

[lapis nova]

hot

[grand void]

the ikea alex drawers are currently 50% off so i had to buy 2 for storage

wouldve loved to put one under my offices desk too but that one is 80cm deep instead of the required 60

[lapis nova]

bruh

right as I buy a desk

what are they normally? I forgot

[grand void]

80€

so like 90 usd or something

[lapis nova]

they’re $95 rn 😔

Not even delivering to me either idk why

[hollow fiber]

why?

isnt it designed to go on top

or is that just common

also first print with new vent lets go

10h print

[lapis nova]

yes

obstructs a lot of view tho

[hollow fiber]

oh meh

[lapis nova]

I would put it on the side but I have 0 room

I got some mystery nylon should I go print with it

[hollow fiber]

i never check my prints so id just go on top

still eyeing p1s

but bleh

[lapis nova]

P2S

[hollow fiber]

mid

[lapis nova]

🙏

[hollow fiber]

1 is better than 2

[lapis nova]

naur

[hollow fiber]

r1 better than r3

[lapis nova]

z5 better than z9

[hollow fiber]

yes

[lapis nova]

🔥

[hollow fiber]

ELE

go for it

[lapis nova]

yes

[lapis nova]

none of my spool holders are small enough kek

so sketchily sat in my dryer

@hollow fiber 40mms my ass

@naive forge

nylon 618

is it gonna shit itself if i print above 40mms

[hollow fiber]

maybe meant 400mms

i think try 400

[lapis nova]

real

i think it will be fine at 300mms

[naive forge]

idk

[lapis nova]

bru

[lapis nova]

will it be awful if i print over 40mms

cause thats painfully slow

[naive forge]

just fucking print it slow

make actually good parts, not fast junk

unless you can test layer adhesion you have no clue how fast it can actually print

[lapis nova]

oke

guy that gave this to me couldnt print it

[lapis nova]

we are gonna do it another day it started smoking out the nozzle

shit was stanky

[naive forge]

dry it

[lapis nova]

good thinking

[naive forge]

and it'll probably need to be dried for ages

[lapis nova]

yea

polydryer says 18h for PA

online said 120f for 24h

[hollow fiber]

youre stupid

[lapis nova]

yes

[naive forge]

prolly closer to a full day or even longer due to low temps

[lapis nova]

i couldnt smell it yet til i opened the door to get the filament pile out

smells like PA

[naive forge]

google ai or whatever is really stupid then

[lapis nova]

it was an ancient prusa thingy

kekl

[naive forge]

unless nylon 618 is something really shitty, nylon is typically 80-90c drying

[lapis nova]

its pretty old it seems

website to buy doesnt even exist anymore\

[naive forge]

mm, quick google search leads to reprap... yeah may be pretty shitty then lol

supposedly is the first nylon filament made for 3d printing....

[lapis nova]

oh gyatt

i got it for free from my dads work

[lapis nova]

i was going to print a benchy out of it

[grand void]

yeah but like peyton says it obstructs a lot of the view and makes maintenance more difficult

but why cant i stop the drying process of the ams within bambu handy

and when i want to start a print it just tells me that i have to wait for drying to end

incredibly stupid lol

[hollow fiber]

loving the new setup

can keep an eye on prints from my desk

[grand void]

why are you printing pistols

[hollow fiber]

game replica

cosplay stuffs

[grand void]

"cosplay"

[hollow fiber]

no just for me to have and play with

[grand void]

just admit it that this is your way of getting the 180-400

[hollow fiber]

idk what im getting ngl

180-400 or 400 fl ed vr

ive also been told i can have something up to 500 for birthday..... p1s combo pretty cheap

[grand void]

well both cost mucho money and the pistol is your way to said money

p1s combo is 559€ so should be like 500 or less pounds

[hollow fiber]

want...

[grand void]

gotta get a separate power adapter to use the ams drying with the p1s

[hollow fiber]

wuttt

[grand void]

yaur only h2/p2 can power the ams as well

[hollow fiber]

this?

[grand void]

yeah the switching adapter

[hollow fiber]

alr this comes with it

nice

not in stock till late feb so i might just ask them to pre order or give me the moneys for it

[grand void]

a random one from amazon would also work if it saves you some money

[hollow fiber]

560 for p1s and ams2 pro is already like 100 under used value lmao

kinda insane its new

@lapis nova petun thoughts?

[grand void]

how much is p2s combo

[hollow fiber]

699

[grand void]

thats onyl 130 pounds more!

[hollow fiber]

bigger number worse

idk whats better abt it

[grand void]

much better screen, easy hotend swaps, much better camera/lighting, temperature regulation with an electronically activated flap for closed pla printing

[hollow fiber]

whats with the "high flow" hotends if you know

[grand void]

they allow for a higher volumetric flow rate

so the hotend can push more filament through it

[hollow fiber]

is it just beneficial for specific filaments or for basically anything common

[grand void]

its basically for going faster

[hollow fiber]

hmmm

may indulge

[grand void]

i use a 3rd party one and its working totally fine

bambus is quite expensive

[hollow fiber]

gonna hurt

[grand void]

6 items?

[hollow fiber]

oil and grease, smooth plate, 0.4 and 0.6 high flow nozzle

2 nozzles are 90 on their own

[grand void]

if you arent keen on the automatic build plate detection id just recommend getting a smooth plate from jupine on aliexpress

[hollow fiber]

only 30 for an oem one and quick shipping so prob just do that

[grand void]

if you only print pla you could also get a geco plate

or well not only but primarily

[hollow fiber]

back ordered lube 😭 ]

[grand void]

the printer does come with a few packs of lube

[hollow fiber]

ya just wanna stay stocked
this all comes back in stock by the 11th anyway

[grand void]

so did you also order a printer

[hollow fiber]

yes p2s most likely

not decided yet

[grand void]

its only going to cost you 500 if you sell your a1!

[hollow fiber]

gonna cost me 0

[grand void]

in that case its also only going to cost you one a1 worth of money to get the h2s

[hollow fiber]

nuh uh

h2s is 1200 for combo lel

no chance

[grand void]

but it has a laser!

[naive forge]

W

[naive forge]

Fuck the laser.

[hollow fiber]

not confirmed 😭

[naive forge]

Yes it is.

[hollow fiber]

still deciding if i want p1s or p2s

[lapis nova]

It’s now illegal in Washington state I think

[lapis nova]

sure

[lapis nova]

get P2S

I’m telling u

[hollow fiber]

y

[lapis nova]

the nozzle switching on P1S sucks ass compared to P2S

[hollow fiber]

theyre gonna be obvious replicas

orange muzzle

[lapis nova]

anyways

P2S actually has a usable camera

u can use all 256x256x256 of the print area

unlike P1S

[hollow fiber]

huh

[lapis nova]

P1S has corner blocked out cuz of the filament cut lever

[hollow fiber]

weirddd

[lapis nova]

P2S it’s relocated

yea

just get P2S 🙏

way better UI

can use usb drive as storage too

[hollow fiber]

ill se about printing vent stuff for it tmrw

[lapis nova]

or get an h2 series cuz they have an actual filtration system you can buy

[hollow fiber]

meh ill just force the air out in the p2s

[grand void]

and some people dont even have one at all!

[lapis nova]

real

[grand void]

theres is an exhaust kit from bambu which works with that flexible tubing to vent out the air

[hollow fiber]

apparently p1s and p2s are badly sealed

hmm

[lapis nova]

you can fix that

[hollow fiber]

how easy

[lapis nova]

tape

[hollow fiber]

where...

[lapis nova]

the door smh

[grand void]

theyre sealed averagely like any other printer in that price class basically

[lapis nova]

https://youtube.com/shorts/Y2j2Hek1uvU?si=DRqPCS2zERIiSCGs

@hollow fiber really biggest area for fume release is the poop chute

[naive forge]

Its illegal in many places

They are trying to make it illegal to even own/distribute files

[hollow fiber]

hm may still enclose it then

depends what solutions exist

[lapis nova]

vro

[grand void]

caters the type of guy to enclose an enclosed printer

[hollow fiber]

people online seem to do it 😭

[hollow fiber]

gonna be me

my main concern is the poop chute being open

[hazy kettle]

why is that a concern?

[hollow fiber]

if the plastic can cone out of there the fumes can too

[grand void]

thats looks like a very cateresque setup

[hazy kettle]

it's not that big of a deal really

it's not like the slightest bit of fumes will instantly kill you

[grand void]

he drilled a hole through his outer walls to vent out fumes

its a really big deal to him lol

[hazy kettle]

💀

[hollow fiber]

i am quite sensitive to it and its a really awful smell when i print pla or petg

its more the smell than anything

[hazy kettle]

pla smells great

[hollow fiber]

gives me headaches

so im just gonna try find a solutin with a closed poop chute container

and connexted to the exhaust

or else need to enclose p2s

[hollow fiber]

this was a fire idea bro

[hollow fiber]

its almost identical

just different printer

[grand void]

just connect the exhaust to the poop shoot and fire all that waste out into the nature🔥

[hollow fiber]

fire

[grand void]

theres a poop shoot collector bin that comes with a lid

i use this and it might be able to seal the poop shoot a bit better

[hollow fiber]

on p2s?

if so send

[lapis nova]

Gay

[hollow fiber]

its fire

also do yk of any vent systems for p2s

that also include poop chute

prob not cuz u dont care but worth asking

[lapis nova]

nah haven’t really looked and plus it’s new release

I’m not sure how different it would be from P1S

So maybe if you find a P1S one, try printing a part and see if it fits

[hollow fiber]

ill see if p1s stuff fits yeah

[lapis nova]

I don’t think they’re very different

I can take a photo of each in a sec

[hollow fiber]

my worry is the p2s has a dedicated exhaust panel you can buy

worst comes to worst ill custom model and cover in hvac tape

[grand void]

im this close to throwing that stupid ams out the window. Im getting this issue every 2nd or 3rd pull back when the print ends and its starting to be highly annoying cuz whenever i manually move the spool it works without any resistance

[hollow fiber]

what brand filament?

[grand void]

jayo

[hollow fiber]

are the spools fully smooth?

ive had issues with some being notched

and catching

[grand void]

yeah the spool is fully smooth. I have to do some flow calibration tomorrow anyway so ill just see if it maybe ends up getting stuck at the filament buffer

On the a1 ams hub the buffer did get stuck quite often but now its working so maybe its a similar issue on the p2s buffer

[lapis nova]

weird

never had this

[grand void]

I suspect its the buffer so ill go from there

[lapis nova]

Google it

[grand void]

no everything on google so far regarding this issue didnt apply to my specific situation

[lapis nova]

🙏

[grand void]

@lapis nova i think the ams motor stall comes from the spool being too light when it nears its end and therefore starting to „jump“ upwards during retracts

[hollow fiber]

could try adding some weight

in the adapter rings 3rd party stuff usually has

[grand void]

i could just make some spools out of concrete for that

my dad always has a couple of pounds of concrete in the basement

[lapis nova]

ah yeah that’s a common issue

u can print weights for the spool hole

[grand void]

yeah im currenty printing 4

[lapis nova]

🔥

[grand void]

that hold dead aa batteries

[lapis nova]

I’ve never had that issue lol

with the spool jumping

[grand void]

the sunlu/jayo spools are noticeably smaller in diameter compared to my bambu one

[lapis nova]

Ah I barely use non Bambu spools

[charred ferry]

Is that the tent people grow weed in

[grand void]

peyton is too rich to buy non bambu filament

[lapis nova]

yes

[hazy kettle]

@lapis nova @zenith sequoia

got one of two shipments so far, still no return request email

[grand void]

is this a bug or why would they send a return request

[hazy kettle]

there was a code going around that made 10+ spools $0 + $15 shipping

i made two orders, so $30 for 20 spools of PLA Plus

lots of people got emails asking for it to be returned or re-purchased at $7.99/roll, and they also asked fedex to return the packages to sender

i haven't gotten that yet, and my first order is sitting in my house

i'm hoping i might've slipped by

(i was one of the first few people to use the code)

[grand void]

doesnt work for me lol

[hazy kettle]

yeah they've killed it

it's long gone

[grand void]

but i wonder what the legal situation is here. Its a working code from their site and not some weird workaround tomfoolery

[hazy kettle]

yeah it's just a regular coupon code

legally someone could just keep it

They accepted the order and shipped it. That’s a fulfilled contract

[grand void]

exactly. Id just keep everything at the expense of probably being blacklisted from ever buying again from them

[hazy kettle]

i mean, so far i haven't even been asked to return anything

[hollow fiber]

the humble 2nd email address

[grand void]

i assume they gonna blacklist your address

humble 2nd address tho

[hollow fiber]

my humble friends address

kek

also ive been greenlit on £500 for printer stuff

soooo

p2s

[grand void]

but i dont want any elegoo printer anyway so

[grand void]

maybe theyll do a discount during chinese new year

[hollow fiber]

...whens that 😭

i have to buy from additive x anyway

[grand void]

in a week or so

[lapis nova]

Bruh

Racism

[hazy kettle]

yeah they're racist against checks notes pasty white kids from nebraska

[lapis nova]

Yeah

Mine is being shipped with Yun Express lel

[lapis nova]

My other friend that ordered got the email too

[hazy kettle]

L

[random coral]

Based filament

[hazy kettle]

especially for $1.50/roll

[random coral]

Wtf

Howw

[hazy kettle]

they messed up

[random coral]

I need this

[hazy kettle]

too late

they made a promo code for 10+ rolls for $0 + $15 shipping

[random coral]

https://cdn.discordapp.com/attachments/1254003032962760746/1266042358139719762/attachment-4.gif

[hazy kettle]

i put in two orders of 10 rolls, so 20 rolls for $30

other people (like peyton and zlushiie) got their orders cancelled or asked to be returned

[random coral]

[grand void]

@lapis nova does your ams also reset every 3rd Party filament to „?“ after starting a print?

[lapis nova]

I don’t believe so

[lapis nova]

Mine stayed, it’s the A4 slot PETG

@hollow fiber

[hollow fiber]

chud

[lapis nova]

what

clear petg battery holders

(I don’t have any other petg)

[grand void]

mmm vfas

[lapis nova]

I can’t smell anything really

only when I put my nose in the door gap 💀

[grand void]

yeah the issue only happens when i select bambu filament presets for 3rd party filament in the slicer

[lapis nova]

ohhhh

that would make sense

usually the generic profiles are fine so I just use them for non Bambu stuff

how you liking the P2S tho?

[grand void]

yeah but not really. Should normally still be saved when i select it on the printer

[lapis nova]

it printing good for u?

[grand void]

its basically as i expected. Good hardware and good software make for a good product. Though as some reviewers mentioned, it has more noticeable vfas but updates have definitely improved it a lot so i dont really care

[lapis nova]

that’s good to hear

[grand void]

my matte pla had under extrusion with the generics so i had to make some adjustments. Unfortunately i cannot select the sunlu matte pla preset in the slicer. Sunlu and jayo filament are basically the same so that would make things easier

[lapis nova]

Interesting…you should be able to select it

idk why you wouldn’t lol

[grand void]

it just lists them as unsupported lol

[lapis nova]

tf

did u try the Bambu matte PLA one by chance

[grand void]

yaur

[lapis nova]

still have the under extrusion?

[grand void]

interestingly enough it only says unsupported on the p2s but not a1m

[lapis nova]

that’s really weird

are u using 0.4 nozzle?

[grand void]

yeah but less noticeably

[grand void]

yeah but its the same with 0.2 and 0.6

[lapis nova]

weird

I will look in a bit

[grand void]

cant really be an AMS issue either cuz i have the ams ht hooked up to the a1m with a custom profile

[lapis nova]

maybe just copy over the settings from the sunlu one to a new save of the Bambu one

I’m using generic PETG profile for my sunlu and it’s been fine

[grand void]

just checked and the sunlu settings are pretty much the same as on my custom made profile lol

except for the sunlu profile having the auxilliery fan set to 60/80%

while im running at 80/100

[lapis nova]

Some keychains I was printing started to warp so I printed one of these

[grand void]

jayos recommended settings for their filament are also hilariously wrong. They recommend a max flow of 9-12mm^3 while i got to 22mm^3

[lapis nova]

I printed nylon way above the recommended print speed

[grand void]

yeah i accidentally did that with tpu and completely jammed my extruder lol

[lapis nova]

💀

I want to try some TPU

yeah my nylon said to print at 30-60mm/s

I was at like 300mm/s

[grand void]

biqu morphlex tpu is quite cool cuz it prints like 90a tpu but turns into 75a afterwards

[lapis nova]

beautiful

[lapis nova]

I kinda want to get the basketball filament to print one

[grand void]

it looked pretty shit from a review i saw where the guy tried to print a basketball out of it

[lapis nova]

yeah I don’t think it basketballs very well hehe

[grand void]

didnt bounce a lot and broke after 3 or so impacts lol

i think 1 spool is also barely enough for 1 basketball so any print failure and its over

[lapis nova]

for no support I think it turned out pretty good

[lapis nova]

yeah

[grand void]

i didnt have any warping issues on the p2s yet. Though i had pla warping with a 65c bed on the a1m

[lapis nova]

hehe

holy w autofocus

[grand void]

AF thought the lens in the back was more important

[lapis nova]

fr

iPhone 17p moment

[grand void]

@hollow fiber wheres ya p2s

[lapis nova]

real

[grand void]

my 15 reigns superior

[grand void]

ill probably get a regular 17 this year tho

[lapis nova]

naur

[grand void]

damn you really chose the worst available color

[lapis nova]

fym

its so pretty in person

[grand void]

i have seen it so often that i started to really hate it

[lapis nova]

I saw it once and hated it

saw it in person and I actually liked it

[grand void]

the blue and silver are chefs kiss

[lapis nova]

orange top notch

[grand void]

the orange also would look really out of place cuz i wear a lot of black/navy suits where a more subtle color is better

[lapis nova]

Boring

Have a little fun in your life smh

[grand void]

corporate life can be boring lol

[lapis nova]

reorganized my bag yet again

[grand void]

pgytech cf reader🔥

[lapis nova]

yes

i love it

[charred ferry]

sold 2x D3100 and getting bambu lab a1 with the money

what fillament is good for starting with printing?

PLA?

[hollow fiber]

pla and petg most common and easiest

[hollow fiber]

@lapis nova p2s not in stock till march

😔

[grand void]

in that case you unfortunately need to buy an h2s

[grand void]

pla, petg/pctg and tpu are the main filaments you can print with an a1. Stuff like abs/asa will require an enclosure to print it reliably

[hollow fiber]

too poor

p1s i could get tomorrow

ez

p2s have to wait a month

[grand void]

i mean would you even have space for p2s when a1 is still there

[hollow fiber]

yeah ill just get rid of a1

tbf both would fit on my desk

[lapis nova]

💀

[hollow fiber]

cooked

[lapis nova]

Can u still order?

[hollow fiber]

yeah just backordered methinks

[lapis nova]

Order it

U need the ams for it not ams lite

[hollow fiber]

comes with ams2 pro

and the adapter

and filament buffer

[lapis nova]

fire

I should get the ams 2 pro

[hollow fiber]

cheaper to get ams 2 combo than buy p2s and ams 1 seperate kek

[grand void]

i bought the p2s and ams 2 pro separate to skip the wait time

cost me about 70€ more tho

[hollow fiber]

not even an option 😔

[grand void]

one stupid thing about the ams 2 pro is that you cant stop or start drying from the app. So whenever you wanna print from the app you literally have to wait until drying is finished

[grand void]

why

[lapis nova]

Maybe it will be a future update

[hollow fiber]

out of stock still

[hollow fiber]

just realised i cant get the p2s anyway

i need £500 for my new plate

[lapis nova]

Bro

[hollow fiber]

500 mb

[lapis nova]

Waste

[hollow fiber]

but yeah need money for that

how waste

its fire

[lapis nova]

$683 USD for a fucking plate

Ours are like $40 USD

[hollow fiber]

permanent ownership

[lapis nova]

Meh

[hollow fiber]

also just kinda sought after

plates with names

my beloved

[lapis nova]

Gay

[hollow fiber]

https://tenor.com/view/sakura-chiyono-o-umamusume-anime-meme-gif-17944029334633452098

i got 600$ to spend

plate is 600$

match made in heaven

[grand void]

are we dead serious

600 for a license plate

[hollow fiber]

yes

[grand void]

if its like London 1 or UK 1 id understand but for chiyo?

[hollow fiber]

its unassigned

so doesnt exist

gov is creating it for me

[hollow fiber]

theres stuff like 0 NE for hundreds of thousands lol

[grand void]

well that feature doesnt even exiist here

[hollow fiber]

theyre permanently owned so everything is sought after

[grand void]

our license plates are made up of a regional code and then 2 letters + up to 3 numbers of your choice

i wanted L 003 but that was obviously taken because lukas isnt a rare name

[hollow fiber]

the majority of uk ones are random

XX00(year identifier) XXX
and the letters have random exceptions

like no specific sets sometimes

[grand void]

here you only rent your license plate from the government so you arent allowed to to any modifications or you'll get dragged to court lol

there are also a bunch of letter + number combinations you arent allowed to use at atll cuz they could be linked to the nazi regime

[hollow fiber]

yea here its permanent ownership so seems more worth to me

cuz like i can just keep it forever

and the low end of resale is like 300for anything

[grand void]

license plate gonna be worth more than your current car lol

[hollow fiber]

my car was 2500 actually smh

ive just wanted a custom plate for a while and this is the only one not taken/impossible

its between this and KA55 UGA

but that one kinda eh

[grand void]

yeeeah chiyo sounds better

[hollow fiber]

affirming my gas

thank you

p2s is on hold now

[grand void]

@lapis nova can you give some advice here please

[grand void]

why choose one if you can have both

also why are you parroted

[hollow fiber]

apparently i was rude to people the past week

idk when

[grand void]

"rude" aka being a bit more critical towards someone

[hollow fiber]

oh more than likely

oh also

ragebaiting that guy who said pelicans arent professional

and tort said he twists knobs for a living

[hazy kettle]

WHAT

[hollow fiber]

he called over mods from VL for that 😭

[hazy kettle]

you got parroted for that 💀

[hollow fiber]

i got told it wasnt for that

[hazy kettle]

what was it for then

[hollow fiber]

but i also got told the coincidental ban from nikon chapel was not targeted

so i dont exactly believe it

[hazy kettle]

oh boy

[hollow fiber]

not sure exactly what they said but nothing concrete

[hollow fiber]

(no other brand channels)

[grand void]

so you got parrot but they couldnt hand out a specific reason

oh well

[hollow fiber]

ya im used to it lel

im just using #💭・photo-lounge as gear lounge

[naive forge]

wild work

wait is this your parents putting it on hold or what

[hollow fiber]

me

i need license plate

well i want one

[naive forge]

oh I was just mixing up the rude thing as being the reason instead of something different

[hollow fiber]

oh lel this is unrelated

i just only have enough fun money for one thing currently

and the license plate is a first come first serve thing

p2s can wait

[grand void]

cater is probably rude to people irl as well

hence why he got parroted

[naive forge]

mm, I'm debating paying $48 for a custom plate

[grand void]

have you had a chance to try the princore printplate extreme?

[hollow fiber]

😔

mines perma ownership at least

no annual fees or forgetting about it or whatever

its just so hard to get anything nice plate wise in the uk

[naive forge]

Mines like semi permanent, I can keep the same text/numbers aslong as I keep paying for it

[hollow fiber]

yeah seems most places are like that

tldr im stupid and scared of forgetting lmao

should get the plate within the next 3 weeks i hope

[naive forge]

ooo, never realized I could use symbols in it like ! too

[naive forge]

Can you get stuff like this?

[hollow fiber]

we cannot 😭

[naive forge]

skill issue then

[hollow fiber]

its white front yellow back
rectangles

only specific letters and numbers too

[naive forge]

We can do any combination of letters, numbers or special characters

[hollow fiber]

lucky

[hollow fiber]

we have stuff like this

although you can request custom ones

same rules tho

[naive forge]

yeah ours aren't like that

standard license plate for me is just ABC-1234, they have no specific meaning

Not really any point in having a specific meaning

[hollow fiber]

yeah uk is kinda dumb

only restriction for custom is AB12 CDE
but the numbers cant make your car look newer than it is

so 2012 car can only be 12

or anything lower

so luckily CH11 YOO works on my 2012 car

[naive forge]

ya'll weird with your license plates

[hollow fiber]

yeahhh its fucked

but after that its p2s time

just gotta print the vent stuff and figure out how to seal it

then boom

[naive forge]

so how much are you spending on a plate?

[hollow fiber]

uhhh....

a lot

680$

thats for the government to actually create the plate in the first place because it doesnt exist yet

and then assignment fee, vat and actual plate value

assigning it to your car costs 100$ already

[naive forge]

how much does a normal plate cost?

like not custom

[hollow fiber]

they come on the car with nothing necessary

or you can buy any old plate for anywhere from 100$-500$ typically

like i can sell my current random plate ownership if i want

[naive forge]

I can't say any words here that I want to use to describe the stupidity of spending $680 on a license plate is

[hollow fiber]

it will make me happy

[naive forge]

like a 0000 type of plate I get, but

[hollow fiber]

and can be transferred to any future car i own infinitely

[naive forge]

mmm ok then it's not as bad

[hollow fiber]

those go to the hundreds of thousands here....

[naive forge]

yeah I saw that mentioned earlier

[hollow fiber]

uk is just silly

[naive forge]

here in the US we just sell expensive cars, not expensive plates

[hollow fiber]

it is a lot for a plate the more i think about it but meh no annual payment and whatever sounds cool

[naive forge]

anyways, ATM I'm saving up some money for climbing gear

[hollow fiber]

not even a z9? smh

[naive forge]

I mean it's a lot, but if you add up the cost of a US plate over the years, it's not insane

[hollow fiber]

only time you lose it is if you keep it off of a car for over 10 years

lel

[lapis nova]

hardened nozzle

[lapis nova]

Yeah apparently I was rude (talking about hard drives)

Maybe it was before that idfk

We both have a week off

[grand void]

peyton and cater going for whos getting banned the fastest next

[grand void]

yaur p2s has one and i have a spare

i can also use the ams ht bypass

[lapis nova]

cater

[hazy kettle]

good

i wondered why it was so peaceful

[lapis nova]

stfu

[hollow fiber]

yeah im not really bothered by it

im not changing anything when im not given a clear reason for the parrot

[lapis nova]

nikon lounge racism

[hollow fiber]

that was the funniest part

one of my parrots i was talking in nikon lounge almost exclusively

[lapis nova]

let’s spread some nikon disease

[lapis nova]

yeah same lmao

[hollow fiber]

they remove access and then tell me it was accidental

and never revoked it

[lapis nova]

so now I gotta glaze d5 in photo lounge

Smh my balls

[lapis nova]

ced said they were gonna restrict all gas stations with parrot too

[hollow fiber]

i told them to do this

[lapis nova]

bruh

[hollow fiber]

rather than just ban specific channels because of specific people

i said either unban all or ban all

[lapis nova]

I need my nikon lounge

[hollow fiber]

its stupid making it targeted

[grand void]

i think both of you should file a class action lawsuit against this server for defamation

[hollow fiber]

i think i should buy more lenses

[charred ferry]

pain

do they ever actually restock these? or restock them often? on bambulab site

what other brands of fillaments would yall recommend? for PETG ?

[grand void]

just get elegoo, jayo/sunlu or esun

you can get bundles on aliexpress where you effectively pay 7€ for a spool

eryone or flashforge works as well

[lapis nova]

I have sunlu and it’s pretty good

[grand void]

funny thing was when jayo filament got sent in sunlu packaging

[naive forge]

sunlu is the parent company

or whatever proper term, but they typically come from same factory too

[grand void]

yeah i know. You get 100g more from jayo spools which is neat

[naive forge]

hm?

[grand void]

Theyre 1.1kg Spools instead of 1kg if thats what youre asking

[hazy kettle]

does one company include the weight of the spool and the other is just the weight of the filament?

[grand void]

No its 100g more filament. The spool is like 20g

[naive forge]

add a 0 onto that spool weight

[lapis nova]

@hazy kettle Hmmmmmm

[hazy kettle]

same

[lapis nova]

I don’t see a 0/5 option

[lapis nova]

now the code only takes off $50 for the 10 rolls

smh

[hazy kettle]

what does that come out to

[lapis nova]

100

102 with the worry free stuff

[hazy kettle]

not terrible, not great

[lapis nova]

i want my rolls for $15

smh

[hazy kettle]

?

[lapis nova]

the 10 rolls for $15

[hazy kettle]

ah

[lapis nova]

my original order

[hazy kettle]

too bad

[lapis nova]

stoobid elegoo

i wonder what would happen if i kept the og order

and just didnt respond to anything

[grand void]

theyll send someone from china to get you

[bronze plover]

I designed and printed a bulb extension thing for a AD600 as per a friends request

It's red for prototyping, final print was white

Just gotta get banana clips to attach to the extender

[grand void]

@lapis nova nylon benchy

[lapis nova]

based

cf so sexy

[grand void]

the ams didnt find it so sexy

had to use the ams ht bypass

[lapis nova]

yeah ur not supposed to use nylon in the ams

it will just shred it

[grand void]

not really like yeah it can happen but the ams just wasnt able to push it past the buffer

[naive forge]

Depends

nylon itself does not matter and is fine

CF/GF may not be though

[grand void]

ive got it to work after adjusting the PTFE tube angle. Ill probably switch to my drybox though to avoid excessive wear in the ams and just reduce the risk of filament breaking.

[grand void]

a1 mini is returned and now i have this lol

plan is to install bondtech indx as soon as it hits retail

[hazy kettle]

corexy 🫶

i love how even the cheap entry level printers have moved to corexy

the days of bedslingers are coming to an end

[grand void]

this one does a pretty good looking 11min benchy

[hollow fiber]

i yearn for my p2s

a1 shakes the new table i got

very annoying

[grand void]

hula

[grand void]

the comgrow there is based on a voron but only costs about half as much and comes 90% assembled

[hollow fiber]

running both will be funny

[grand void]

the p2s has the improved h2 series feet so only the printer itself shakes violently

[hollow fiber]

maybe they will hit a rhythm and be fine

[grand void]

mechanical vibration compensation

[hollow fiber]

depending on how fun dual printers are i might keep both

[grand void]

theyre fun if you actually have the project volume to use both

i like having 2 for projects where i need a ton of parts

[hollow fiber]

recently ive just been limited by parts yea

[grand void]

the a1 is cool for printing tpu since you have easier access to the print head

[hollow fiber]

will probably just run the a1 with a 0.6 and the p2s with 0.4 for smaller parts

like my cosplay stuff ive been making takes fucking forever

5 days on 1 printer

probably 2 between both printers

[grand void]

for cosplay stuff 0.6 is probably fine. Gets you a good improvement in max flow and cuts down time a lot

and if you need a bit more details but dont wanna sacrifice speed too much you can also just go to 0.24mm layer height instead of 0.30

[hollow fiber]

.6 for the bulky parts and then just 0.4 low layer height for the details i need to glue one

its worked well so far

[hollow fiber]

p2s should be faster on its own anyway

at least i think it is

[random coral]

thi thingy takes indx?

[grand void]

yeah according to a bondtech staff member there will be a guide on how to install indx on the sv08

there wont be a full kit tho. Thatll be exclusive to the core one

[random coral]

i see

i wawnt core one

but im too poor for allat

the upgrade kit from mk4 to core one would be like

the same cost as getting a new core one kit

[grand void]

not the biggest fan of prusa to be honest

they always seem to do the minimum and then charge the maximum for that

especially the prusa xl enclosure follows that principle

[grand void]

yeah the main advantage you gain is far better acceleration

if you want maximum speed just get a delta printer

[random coral]

prusa are pretty expensive tbh

i just bought mine when they said it was the ebst thing around

bambu never showed up on any lists when i was researching

ill probably buy an mmu3 then another printer

[grand void]

theyre a pretty new company. First launch was the X1 in 2022

[random coral]

yeah that explains it

i started research in early 2022

and bought it in sept?

then like 3 months later on the ny times 3d printer review the x1 showed up

my dad said only ny times is good to refer to or something idk but yeah thats how i ended up with my prusa

wait no not 2022 wtf

i forgot when i bought it maybe 2023

but all ik is i never saw bambu during research

[grand void]

theres also always a risk involved supporting a completely new brand. They couldve just done an ankermake and discontinue their consumer 3d printers after a year

[lapis nova]

why return it lmao

[grand void]

because i do not have space for 3 printers

[lapis nova]

Yeah u got a big ass corexy printer in the way

[lapis nova]

Kek

[grand void]

yaur but thats going to be a tool changer in the future

[lapis nova]

Hmmmm

H2C or bust

[random coral]

Buh

[lapis nova]

I wish it was mine

[hollow fiber]

i solved it by pinning the table against the wall

high intelligence solution

0 room to shake so it cant

[lapis nova]

💀

yk the bed moves right

[hollow fiber]

yes bruh

[lapis nova]

bed hit wall

smh my balls

[hollow fiber]

incredible reading comprehension from peyton

[grand void]

ah yes cater pinned the printer to the wall

it can now only print within the center of the print bed

50x50mm print volume

[lapis nova]

yes

I’m fucking tired and I have basketball tourney tonight