3D Printing Shrine

[grand void]

hmm that’s unfortunate cuz with my ace pro it wouldve been dried too but on an external spool it just sits and collects moisture

[naive forge]

So now you need a dry box to print out of and dessicant, even more opportunities to spend money

[grand void]

just ordered a dryer for the tpu. Why do i need dessicants tho? ill just store both my tpu rolls in the dryer permanently

[naive forge]

You can over dry if you leave it long enough and money for electricity

[grand void]

ok lucky for me i still have 2 bags of dessicants that i used to store my other filament rolls

i mainly just need tpu for a gasket for my cfeb/sd box

[hollow fiber]

you can find prints or methods to disable the ams auto load system to still take advantage of the drying

a lot of them exist for the AMS lite

[lapis nova]

yes

[grand void]

yeah idk i just bought a filament dryer. Its something i’ll probably need anyway

[lapis nova]

Yeah everyone should have a filament dryer

[grand void]

yummy poop from 1 multi color print

i definitely underestimated the amount of waste it produces lol

[lapis nova]

lel

[grand void]

my dryer is delayed

man i really wanted to print tpu today

[lapis nova]

You can print it w/o dryer

for a bit

[lapis nova]

@naive forge 👀

[naive forge]

Interesting

[lapis nova]

It looks kinda cool

[grand void]

@lapis nova is there anything i need to be aware of besides the humidity thing when printing tpu?

[lapis nova]

Don’t print above recommended parameters

That’s really it ig

[hollow fiber]

pray

in my experience it is just unstable

sometimes it prints fine

sometimes the prints fail miraculously

just put of nowhere

[grand void]

as in not hotter than recommended? Im currently just using the standard anycubic tpu profile

[grand void]

thats what i do before any print anyway

[lapis nova]

Hotter, faster

[lapis nova]

that’s what I did with my Ender

I should get some TPU

[grand void]

ok no im not doing that. Ill probably just start with standard profile and then work my way down if needed

[lapis nova]

Your anycubic is direct drive right

(extruder motor is in toolhead?)

[grand void]

yep

[lapis nova]

ok then ur fine

If it wasn’t direct drive then we would have issues

[grand void]

i didnt know not having the extruder inside the toolhead was a thing lol

first layer looks fine so far but is printing tpu kinda slow?

At least it looks a lot slower than petg/pla

[hollow fiber]

I mean yeah it's stretchy and flexible

too fast could make it move around and layer shift

I think that's why?

[grand void]

makes sense

[grand void]

btw is it normal that tpu is kinda hard to get off the print plate?

[hollow fiber]

yes

heat the plate

then it will peel off

[grand void]

first print came out really nice but it was a pain to get off lol

ok great

[lapis nova]

@naive forge where did you buy your tullomer from? Those nylon rings i printed for a client they may need more in the future and i might see if tullomer would be an option

Actually maybe not for $275 for 0.5kg

[naive forge]

0 layer adhesion, but there's only 1 place to buy it

[lapis nova]

[naive forge]

PC > tullomer

[lapis nova]

Opinions on the Revo hotend stuff?

quick change nozzles cool

[naive forge]

It's fine

[lapis nova]

Just probably not the brass

[grand void]

@hollow fiber have u done a 70-200 vrii box yet?

[hollow fiber]

not yet

[grand void]

ok ill be doing one tomorrow

[hollow fiber]

i havent found much time for it

and seems complicated

[grand void]

yes but i have a lot of time atm so imma give it a try

[hollow fiber]

lmk how it goes

[grand void]

will make one with a cutout for the tripod foot

[hollow fiber]

i had no idea how to plan for the tripod foot

[grand void]

neither have i lol

but ill just freestyle it

[lapis nova]

Just put tripod foot facing up

Easy

[lapis nova]

@naive forge those nylon rings passed QC at the company I sold them to

barely

[naive forge]

QC or product testing to make sure it can withstand the needed forces/temps

[lapis nova]

pretty sure it was just measurements

There was a little notch in the ring that was literally impossible to sand so that’s why it barely passed

It was off by 1mm

[hollow fiber]

moved printing shit

getting a vent cut in my wall for ease of use

very noice

don't mind the humungous Capri sun boxes

they are storage

very good size

[grand void]

so youre cutting a hole in your wall for ventilation?

that’s dedication lol

[hollow fiber]

yup

much easier than having the window open at all times

and can always be closed or sealed back up

[grand void]

i usually keep my window open but only tilted so not completely open

but my printer stuff is in a dedicated workshop room so i dont inhale that many fumes

[hollow fiber]

I'm planning to try printing asa soon so proper ventilation is something I'd very much like

[grand void]

i wanna try abs but no enclosure

[hollow fiber]

my enclosure was only like

£50?

and it's really solid

[grand void]

i did find a refurbed kobra s1 tho which is like similar to the p1s but i have spent enough on 3d printing recently lol

[hollow fiber]

built in ventilation and all

also yeah abs needs crazy specs

like 120 bed and 270 hotend I think?

[grand void]

it looks janky tho and my inner demons tell me to do it properly

[hollow fiber]

I mean there's really nothing wrong with it

everything is properly covered

zips shut and tight
ventilation has negative pressure so no fumes could escape anyway

[grand void]

tbf im too busy printing organization stuff atm so anything that requires an enclosure is just future plans

i really love matte pla

[hollow fiber]

same

helps layer lines a lot

[grand void]

printed my mom a mothers day gift and looks very nice

yeah

[hollow fiber]

just close the door and get a bunch of industrial fans on the windows

if I did ever buy a new printer it'd for sure be enclosed

much less hassle

[grand void]

the wood pla i have is also cool and theres like a ton of other filament i really wanna try but man it adds up in cost quickly

[hollow fiber]

could use my z7ii profits on a p1s instead of z8 kekl

[grand void]

get z6iii and spend the rest on p1s

[hollow fiber]

yuppp
I have so much filament already but want shit like asa for outdoor things

[hollow fiber]

could lel
but 45mp and cool screen

[grand void]

pla metal looks cool or that silk stuff

[hollow fiber]

tbf could probably downgrade to z7 original and just keep profits

[grand void]

or just go into debt and get both z8 and p1s

max out some credit cards

[hollow fiber]

lel

I could just sell the 24-120 I got for free(technically) too

seems the p1s can be ventilated very easily

cool

waiting for Peyton to spawn with the "pla doesn't smell" or "you don't shoot just get p1s instead"

[lapis nova]

p1s gud

Built in filter for all your filtering needs

No hole in the wall needed ‼️‼️

[naive forge]

For all the useless filtering needs*

[lapis nova]

Hey it works

[naive forge]

Barely

[lapis nova]

I printed with nylon and could only smell when door to printer was open

[hollow fiber]

yes needed

no point risking it

[grand void]

since you dont shoot anyway just sell everything and get like 3 or 4 p1s

[lapis nova]

real

[grand void]

made a z6iii box yesterday

i wonder how it turned out and if i fucked up scaling

[grand void]

turns out i did. Cutout is like 3mm too narrow

[hollow fiber]

sanding time

[grand void]

was thinking about that but the print didnt come out great anyway so ill just redo it

but i think i fucked up my bed temps cuz after changing them bed adhesion has become terrible

[lapis nova]

Clean ur build plate

Dish soap and water

[grand void]

yeah uh turns out im stupid. I accidentally touched my build plate with greasy hands and put grease all over it lol

[lapis nova]

Lmfao

[hollow fiber]

you guys clean your build plate?

kekl

[grand void]

i usually throw mine away after each print

doesnt get any cleaner

[hollow fiber]

ive genuinely never had a print fail cuz of build plate lel

i clean it like once every 3 weeks out of principle

but otherwise its like always fine

[lapis nova]

I have a couple times

[lapis nova]

@naive forge know of any places where I can get big spools of PLA or PETG?

Someone may need like 300 of these

[naive forge]

3kg 5kg or 10kg, know the bigger the more annoying it is to deal with

[lapis nova]

is PETG hard to print with? Never printed with it before

And probably just 3/5kg spools

[naive forge]

easy if it's dry

personally for orders I spend the extra on 3dxtech, but there PLA is a little limited
But for 3kg personally I vote Numakers, otherwise elegoo is typically decent

[grand void]

the orangestorm giga is funny

whole ass house

[naive forge]

zyltech might have some 5kg spools, they are typically a solid brand (especially abs)

[lapis nova]

Yeah my dryer doesn’t fit bigger than 1kg spools

I think PLA should be fine for the part

I asked the designer and he said it doesn’t go under any heat

It’s just a clip for some metal hooks

And now he’s telling me it needs to be food safe…..

[naive forge]

yeah, why I typically stick to ~1kg spools even on large orders, simply cause it's easier to deal with for me
if I ever got an automatic re-spooler I may go larger

[lapis nova]

99% confident 3d printing isn’t food safe

[naive forge]

Either shoots cost up a billion times or not being 3d printed

[lapis nova]

I’m guessing the part would need to be sealed

[naive forge]

To make it food safe you'll want to coat it in a food safe resin or epoxy or something

[lapis nova]

ugh

[naive forge]

But just gonna say, you probably already know this, but don't go the cheap option for orders, go with good and reliable filament even if it costs more

[lapis nova]

yeah ik

I assumed elegoo was pretty reliable

[naive forge]

Yeah elegoo is one of the better reliable consumer main stream brands for pla atleast

[lapis nova]

PLA itself is already food safe it’s just the layer lines where the bacteria sits

That’s my issue

I wonder how much it would cost to send them off for injection molding

[naive forge]

not cheap

[lapis nova]

I will have to look on my computer when I get home

I bet it isn’t cheap

[hollow fiber]

just uhhh

coat it

lel

and print with stainless nozzle

[lapis nova]

what the hell cater

r7

are we deadass rn

[hollow fiber]

ryzen 7

kekl

[lapis nova]

I was about to have a damn heart attack

[hollow fiber]

i did something else funny tho

[lapis nova]

what

200-400?

[hollow fiber]

wait till tomorrow hopefully

ill send pic lel

goated purchase coming

[lapis nova]

Lmao you did buy one

[hollow fiber]

(h2d)

[lapis nova]

0/10 ragebait

[hollow fiber]

kekl

p1s though

good ebay deal

[lapis nova]

0/10 ragebait

[lapis nova]

#🐒・gear-discussion message

I’m not stupid lmao

you did buy one

[hollow fiber]

debatable

you are american

[lapis nova]

real

I’m stupid but not that stupid

[hollow fiber]

sure

[lapis nova]

Buy p1s new

smh

[grand void]

just buy h2d

stop being a brokey

smh my head

[hollow fiber]

I also did get something else alongside the 200-400

unironically

[hollow fiber]

2 nozzle too many

[lapis nova]

bru

p1s?

[hollow fiber]

naur

cheap

like 130 bucks

[lapis nova]

hmm

is it photography related

[hollow fiber]

yes

[lapis nova]

Monopod

[hollow fiber]

❌

[lapis nova]

hmm

idk

some vintage lens

[hollow fiber]

its related to the 200-400

not a lens

well

technically not

[lapis nova]

tripod foot

oh wait

tc

[hollow fiber]

yup

1.4x ii

[lapis nova]

Not 2x smh my head

[hollow fiber]

the ii and iii are near identical on the 200-400 ive found

so no reason to spring for iii

so ill have a 560mm f5.6

but will stop down to f6.3

[lapis nova]

400-800 f8

with 2x

[hollow fiber]

slight bit better at f11

[lapis nova]

75-300 ca lel

[hollow fiber]

unironically not bad on the 1.7x

lol

at f8

[lapis nova]

Meh

What about without tc

is it sharp

[hollow fiber]

very

[lapis nova]

show

[lapis nova]

damnnnn

[hollow fiber]

https://www.the-digital-picture.com/Reviews/ISO-12233-Sample-Crops.aspx?Lens=704&Camera=614&Sample=0&FLI=4&API=0&LensComp=0&CameraComp=0&SampleComp=0&FLIComp=0&APIComp=0

[lapis nova]

that’s pretty good

[hollow fiber]

ever so slighty worse than the 100-400 wide open

but like

[lapis nova]

f4

[hollow fiber]

f4 vs f6.3

[lapis nova]

yeah

p1s when

[hollow fiber]

https://www.the-digital-picture.com/Reviews/ISO-12233-Sample-Crops.aspx?Lens=704&Camera=614&Sample=0&FLI=4&API=0&LensComp=1120&CameraComp=453&SampleComp=0&FLIComp=4&APIComp=0

look how close this is

[lapis nova]

sell a1 for p1s

[hollow fiber]

like

stopping to f5.6 clears it up

[lapis nova]

that 100-400 is tack sharp holy shit

[hollow fiber]

even on 5dsr

its peak optics

just f6.3

but like

200-400 will be fine

i value f4 more than the 100-400 peak sharpness

[grand void]

imagine you get a fucked copy which isnt really sharp

[hollow fiber]

id just end it then and there

I haven't seen anything on any sample variation at all so it'd piss me off even more 😭

[grand void]

finally managed to make the z6iii box fit perfectly

[hollow fiber]

layer shift sad

[grand void]

Obviously a sign to buy p1s

[hollow fiber]

only because I ran out of petg and had to refill it

[grand void]

filament backup my beloved

currently printing a tripod collar for the 100-400

gonna be interesting how sturdy itll be

[hollow fiber]

errr

i probably wouldnt trust it that much

unless good filaments

[grand void]

well the guy i got from used it for 3 years so

should be fine

[lapis nova]

P1S time

[hollow fiber]

nah just reprint

also using bambu support material

[lapis nova]

You mean reprint on P1S

Ok

[hollow fiber]

guy i bought it from said the support material sucks so idk

[naive forge]

Support materials isn't great yeah

[hollow fiber]

welp cant be worse than my current pure petg supports that leave awful texture on everything and sharp points

[naive forge]

ultimately depends on both materials, but generall a clear PETG is recommended for PLA or other way around for PETG

Other materials will depend

[grand void]

so when printing petg, pla is recommended as support material?

Cuz when i need supports i used petg for now and its not fun lol

[naive forge]

As a support interface material

[grand void]

ah ok so basically the support body itself can be petg but the layer that connects the print with the support body should be pla

[naive forge]

Yeah

Now, not all petg/pla combos will work, some stick more than others

[grand void]

hmm oke ill just give it a try with the pla i have and then see where that leads me

[hollow fiber]

200-400 cap coming soon

[lapis nova]

[hollow fiber]

dual purpose cap

very cool

and fits in the cloth casing

[lapis nova]

oh so the cap works when the hood is reversed?

[hollow fiber]

yup

and when non reversed

that's why there's a slight gap in 1 image

[lapis nova]

ah cool

[hollow fiber]

very nice the guy had it up for free

my saviour

[lapis nova]

🔥

I need a 150-600 lens cap

[hollow fiber]

more print

[lapis nova]

Ima just find a 95mm or whatever one

[lapis nova]

shit camera quality

[hollow fiber]

why not make one that just fits snug over the hood

[lapis nova]

I dont have tpu but i should get some

[hollow fiber]

that'd be easy to put on and remove and hard to lose

tbh just print petg or pla and tape the inside

[lapis nova]

like your 15-30 one?

[hollow fiber]

it'll friction fit

ya

[lapis nova]

mmmm

[hollow fiber]

I'll send a pic it has a cool design

[lapis nova]

I wanna get tpu anyways so i might js do that

[hollow fiber]

dots all around to grip the lens

[hollow fiber]

cuz see through plastic

printing my cousin a kazoo

he's pissing people off with whistles it's hilarious

[lapis nova]

Lmao

youre just the fuel to the fire huh

[lapis nova]

ah yeah smart

[hollow fiber]

may have made him an Aztec death whistle

[lapis nova]

[hollow fiber]

more reliable than a squeeze to fit cap like stock id say

and it'll be kinda big so hard to misplace

[lapis nova]

ya i will try

[hollow fiber]

tpuuuu

[lapis nova]

I think i will design it to go over the lens hood when its reversed cause once i have the lens hood on i normally dont use the lens cap cause the lens hood is so huge

[hollow fiber]

i got 95a and it's decent for stuff like this
would probably go softer

[hollow fiber]

it should fit either way

if the hood is just a cylinder

[lapis nova]

im an idiot

[hollow fiber]

lel

[lapis nova]

here

whenever im not using the lens hood

which is usually never

the lens hood is pretty big on 150-600

ok i wouldnt say very

but its large

[hollow fiber]

would you ever fully take it off tho

or just leave reversed

[lapis nova]

pretty much never

99% of the time i shoot with it on

[hollow fiber]

id go for over the hood cap then

[lapis nova]

lens protection & peace of mind

sigma lens cap replacement is like $45 kekl

[hollow fiber]

15$ tpu

like 2 hour print

shrimple

[lapis nova]

amazon tpu dirt cheap

like $15-$20

bambu tpu $$$

I just cant use it in my ams sadge

[hollow fiber]

I got sunlu I think

[lapis nova]

wait

overture high speed tpu works in ams without clogging

rahhhhh

thank you 2 year old reddit post

[hollow fiber]

what tpu is it?

like 95a or whatever the technical term is

[lapis nova]

95a

$30 rip

[hollow fiber]

oh weird

how it soft but no deform

[lapis nova]

mod

[hollow fiber]

whar

[lapis nova]

https://www.reddit.com/r/BambuLab/comments/14ui6ys/lets_do_this_running_list_of_working_tpu_in_the/

[hollow fiber]

AMS lite?

[lapis nova]

regular ams

[hollow fiber]

sadge

[lapis nova]

PPS-CF funny material

[lapis nova]

@hollow fiber get in here silly goose

[hollow fiber]

fake metal

[lapis nova]

I want it

but need 300c+ to print 😔

[naive forge]

Pps-cf is fun

[hollow fiber]

also @lapis nova just remembered instead of a toy hood you could do petg and use a screw mount

like the teleprime hoods

[lapis nova]

@hollow fiber 7 hour lens cap 🙏

[hollow fiber]

why 7 hour bruh

[lapis nova]

0.2mm nozzle and multicolor

[hollow fiber]

just why though

[lapis nova]

it say Nikon on it

[hollow fiber]

0.6mm nozzle full black 🙏

[lapis nova]

The letters looked goofy with 0.4mm nozzle

so I did 0.2mm nozzle

ez

went from like 1 hour to 7 hours 💀

[hollow fiber]

mid

ive never used my 0.2 lol

[lapis nova]

Bruh

I thought you did

[hollow fiber]

new print for friend

naur

0.2mm too long

[lapis nova]

Bum

[hollow fiber]

everything i print for myself is functional more than pretty

so

[lapis nova]

this is functional big dawg

[hollow fiber]

strength and print time my beloved

would it function on a 0.4mm nozzle?

[lapis nova]

Yes but no look good

[hollow fiber]

sooo same thing

0.6mm my beloved

[lapis nova]

no

me want it to look good

smooth PEI 😩😩😩😩

[hollow fiber]

me like no branding

looks nice

[lapis nova]

smh

so you gonna tape over your z6iii logos

[hollow fiber]

z8*

but no

idc about pre existing ones

im just not gonna shill nikon with 3d printing too

[lapis nova]

kekl

This my only branded camera print

and I don’t have yellow so it’s white letters

[hollow fiber]

made some lens caps recently

work surprisingly well

[lapis nova]

show

oh yeah sad news cater

[hollow fiber]

fits tight

what

[lapis nova]

one of my frens got z6iii

[hollow fiber]

no z6iii

[lapis nova]

https://cdn.discordapp.com/attachments/1352784990580248683/1390122140543750276/caption.gif

[hollow fiber]

soon 🙏

[lapis nova]

https://tenor.com/view/lie-lie-detector-cap-you-are-lying-stop-lying-gif-12198388917433403789

copium

[hollow fiber]

as soon as z7ii sells

[lapis nova]

cope

[hollow fiber]

when z6iii?

[lapis nova]

soon

[hollow fiber]

[lapis nova]

not soon lol

[hollow fiber]

bro think he me

[lapis nova]

am poor

I debating on selling FM

[hollow fiber]

do it

[lapis nova]

no

not yet

[hollow fiber]

yes yet

mpb offers 1100 for z7ii 😔

if i sold 24-120 too i could get z9 instead

[lapis nova]

what is this copium

[hollow fiber]

its stupid idea kekl

z9 mid

[lapis nova]

z8 mid

[hollow fiber]

d750 mid....

d700 betterer

[lapis nova]

❌

[lapis nova]

@hollow fiber 😔

Time to reprint solid one

[grand void]

lol p1s mid

[lapis nova]

Probably adhesion issue

[hollow fiber]

low infill?

[lapis nova]

idk i will check later

[lapis nova]

@hollow fiber should I buy

[hollow fiber]

yes

[grand void]

wow only 2$ for an h2d

buy all the stock

[grand void]

unforeseen side quest

[grand void]

turned into a main quest now

[grand void]

well i think im fucked lol

tpu is so incredibly stuck in the extruder that i cant get it out no matter what

[lapis nova]

[hollow fiber]

[grand void]

ended up buying a new print head. Only solution left was to forcefully pry open the extruder which would’ve damaged it anyway.

a new original print head was 30€ off aliexpress while a new extruder is 25€

so for 5€ more i also get a new hotend

[lapis nova]

[naive forge]

I need to replace the center support beam on my large T-Rex, debating getting a part printed out of titanium lol

[lapis nova]

just print titanium smh

[naive forge]

it'd be $86.65 for the part and $22.73 for shipping

[lapis nova]

💀

[lapis nova]

@hollow fiber wonder who this is

[hollow fiber]

i wonder

[zenith sequoia]

how good are caps/hoods that are 3d printed

[hollow fiber]

if good filament theyre great

i use printed caps on my tc

cuz the ones it came with suck

[zenith sequoia]

ic

[zenith sequoia]

what do u usually use?

petg?

tpu?

[hollow fiber]

petg typically

ideally asa for stuff thats gonna be outdoors a lot

but petg is fine

[lapis nova]

fine

[zenith sequoia]

https://www.printables.com/model/4820-camera-backpack-mount-works-with-heavy-dslrs

@lapis nova

Hmm

[zenith sequoia]

does anyone have a hotshoe cover stl

[hollow fiber]

could print this shit in carbon fiber reinforced nylon and still wouldnt trust it

[hollow fiber]

just google it theres plenty around depending on what you want

[naive forge]

I use pla to hold up a whole bunch of expensive crap

[zenith sequoia]

they be like different tho

[hollow fiber]

tighter or looser fit

hotshoes are near enough standardised

[zenith sequoia]

how much wiggle room is there lol

[hollow fiber]

apart from canon shit

it depends on print tolerances and everything

[zenith sequoia]

☹️

okie

[hollow fiber]

its like 2 grams of filament just print a bunch

[zenith sequoia]

true

[hollow fiber]

i no longer trust pla since it deformed in a few hours sun

very sadge

[zenith sequoia]

will pla hotshoe get fucked

or was your pla deform from like bearing load

[naive forge]

Ah yes, one of the least heat resistant materials in the sun

[hollow fiber]

it was for like 2 hours on a warm day through my window 🤷

i just use pla for fun prints now

which is most of them

[hollow fiber]

i doubt it

mine just had moving parts and it bent them slightly

but hotshoe is solid and stays in the same position

[lapis nova]

depends on heat

i would just print in ASA or even nylon

[naive forge]

Pla is prone to creep and not heat resistant

[lapis nova]

skill issue tbh

[naive forge]

Not really, just a fact

[lapis nova]

oh yeah you remember those nylon rings i printed?

[naive forge]

Hence why my dinosaur is getting a sls nylon part and eventually might get a titanium part

[naive forge]

Yeah

[lapis nova]

still havent gotten paid...

[naive forge]

[lapis nova]

mhm

[naive forge]

No pay half upfront atleast?

[lapis nova]

nothing

0

no payment whatsoever

ive talked to my dad about it and he has had nothing

[naive forge]

[lapis nova]

he said his work is getting a new payment system or whatever

im getting kinda impatient

[hollow fiber]

at least you learn for next time

[lapis nova]

yeah to never do this again

unless they pay me half up front

[naive forge]

Most I do before payment is prototype

[lapis nova]

damn

yeah uh

i did all printing and post processing

almost 2 months ago

[naive forge]

Mhm

[lapis nova]

Next 3d printing project

@hollow fiber

[hollow fiber]

paid?

[lapis nova]

no

fun

[lapis nova]

little hint

tinkercad moment

[hollow fiber]

tinkercad mid

but cba to learn anything else

[lapis nova]

real

tinkercad so damn simple

that why I use it

I have very limited Fusion360 knowledge

[lapis nova]

@naive forge i need helps

0.2mm nozzle

and uh

why does it just not print some parts

and how can i fix it

[zenith sequoia]

prolly why no?

dont some slicers just not print stuff thinner than 1 line

is there any width to the other parts in the stl?

or just planes

[hollow fiber]

yeah these look very thin

maybe change layer thickness

[lapis nova]

Yea I tried I think I just need to make the model walls larger

[lapis nova]

@naive forge i have this plane fuselage and im struggling to make it completely solid and have the cockpit look like this rc plane, where its a solid object. ive tried a bunch of stuff in fusion and i still cant figure it out any help is appreciated

[hollow fiber]

enclosure connecting part snapped mid print

caught it early and replaced it

but this enclosure is feeling like the ship of theseus rn

ive replaced most of these connectors with custom ones i made ages ago

glad i did

theyve saved me many of times

[grand void]

this means its p1s time

[hollow fiber]

naur enclosure my beloved

[grand void]

i also figured out how to put my desk. Im gonna do it like in the first picture i sent but instead of having it crammed against wall ill put an ikea kallax shelf between the desk and wall. This pushes the desk more into the room and gives me a nice surface to put some decorations and my macbook stand

[hollow fiber]

will be cramped with the other desk type thing no?

[grand void]

the other desk is my old one and is just standing there temporarily. I will throw that thing away today

didnt realize that it was visible in the picture lol

[lapis nova]

bum

p1s time

[zenith sequoia]

https://us.store.bambulab.com/products/a1-mini

two fiddy???

jsus

mayb i cop

is my ky brokn bruh

fuck

[hollow fiber]

cheep

unless including ams then thats good

[zenith sequoia]

ams is 400

like ai mini plus ams

400\

[hollow fiber]

meh

i got my a1 mini for like 210

[zenith sequoia]

gay

[hollow fiber]

i got my a1 + ams and 30 rolls of filament for 300 lol

[zenith sequoia]

how the fuck

[hollow fiber]

ebay

i literally only buy good deals ima be real

only reason i bought my d5

[naive forge]

Used is always a fun 50/50 though

[hollow fiber]

got to see it in person so wasnt worried too much

[lapis nova]

fire

i own a1 mini

and ams lite kinda aight

no enclosure smh

[zenith sequoia]

Ain't nobody need one

Just git gud

[grand void]

thats a good cover up for just having an insane amount of gas

[hollow fiber]

it is

i want that £2500 z9 lol

[lapis nova]

@hollow fiber

[hollow fiber]

so...

we have our hdds straigt on the chassis

[lapis nova]

extra 8tb of storage

[lapis nova]

yeah uh

the right stack is off the chassis a bit

[hollow fiber]

brother just print tpu feet or smth it aint that hard 😭

[lapis nova]

lemme get tpu

wait

I have furniture bumpers I think

[hollow fiber]

vibration = not good

[lapis nova]

[hollow fiber]

js something rubber or whatever

[lapis nova]

hmmmm

all I have are little felt pads

[lapis nova]

This what I got big dawg

[hollow fiber]

unc

[lapis nova]

dawg it’s all I got

I have this sticky rubbery tape

@hollow fiber

should it be on the plastic as well

there

@hollow fiber 😡😡😡

[hollow fiber]

so much 😭

it just needs anything so its not against the chassis lol

[lapis nova]

Ok done

[hollow fiber]

update yo status bum

[grand void]

cringe i have all my nas hdds hanging in the chassis without any support

maybe ill print some hdd cages but meh its fine so far

i do need some power splitters cuz ive ran out of power cables for my hdds lol

[lapis nova]

@naive forge

[naive forge]

What's wrong with em

[lapis nova]

Nothing

[zenith sequoia]

https://cdn.discordapp.com/attachments/1358532886483042364/1399614246886572062/caption.gif

[lapis nova]

Mf gif stealer

[zenith sequoia]

ye

[hollow fiber]

i see you zlushie...

[zenith sequoia]

😭 why would you possibly be in this chat

unless you have a plugin to notify u when someone typing

Hmm

[hollow fiber]

nuh uh im just all knowing

[zenith sequoia]

what should i print

[hollow fiber]

d500 cage

[zenith sequoia]

i think one of these for batts

and a hotshoe cover

[zenith sequoia]

interesting proposition

jesus christ

why though

[lapis nova]

yes

[lapis nova]

yo send me this

I need cover for 3 batts

[zenith sequoia]

wot if i dont

[lapis nova]

https://tenor.com/view/silly-gif-3397568161154480277

[zenith sequoia]

unc buggin

[zenith sequoia]

https://tenor.com/view/nuggetand-cat-car-cat-meme-cats-gif-13549128190129307854

[lapis nova]

Ty king

[grand void]

print it out of pla and see how long it lasts

[naive forge]

Not long

[zenith sequoia]

Hell nah

[zenith sequoia]

Hmm

@hollow fiber @lapis nova do i drive 5 hours for it

[hollow fiber]

how much

[zenith sequoia]

thats a great question

[lapis nova]

depends how much

[zenith sequoia]

how hard is making a 3d printer frl

I mean cmon

@hollow fiber

@lapis nova should i do it

[lapis nova]

Yes

[naive forge]

Threaded printers 💀

[zenith sequoia]

@lapis nova @hollow fiber should i make a better version of yeggi

[lapis nova]

@hollow fiber @naive forge

[naive forge]

never seen it end up down there before

[lapis nova]

Yeah me neither lol

[naive forge]

gug

[lapis nova]

yes

[lapis nova]

https://us.store.bambulab.com/products/h2s?from=home_banner @hollow fiber

[naive forge]

Not as expensive as expected tbh

Looks to be positioned as a x1c replacement

[lapis nova]

yea I was expecting higher price

$1250 for printer only

https://tenor.com/view/dwayne-the-rock-johnson-dwayne-johnson-dwayne-yes-yes-yes-yes-gif-23180639

[hollow fiber]

this seems very cool

[hollow fiber]

@lapis nova is this peak 3d printing

[lapis nova]

wat is dat

[lapis nova]

Still didnt tell me what that is

[hollow fiber]

trackr

[lapis nova]

ew

why

[hollow fiber]

bored

[lapis nova]

I see

[hollow fiber]

its for my pelican but i was fucking around with it and saw it fit almost perfectly in my l bracket

sooo

fun printing

[lapis nova]

Bros gonna lose his pelican

[hollow fiber]

cant hurt having it

also tracks my car basically

thats the big worry

[lapis nova]

bros gonna lose his car

“ayo where did i put my car”

[hollow fiber]

bro some guy literally came to my store with his car covered in bullet holes with bulletproof glass

i do not trust this city bro

[lapis nova]

eu moment

[hollow fiber]

nearly finished z6iii mount anyway

[lapis nova]

bros actually putting one on his camera

[hollow fiber]

🤷

something to do

funny too

[lapis nova]

maybe go shoot

[hollow fiber]

nahh

[lapis nova]

Bad boy

[random coral]

h

[grand void]

no need for one cuz no one actually wants to steal a nikon

sony much more valuable

[lapis nova]

Real

[random coral]

Real

[grand void]

Real

[lapis nova]

Real

[zenith sequoia]

Go shoot make money and gas more

[hollow fiber]

abt to gas 35-150

[zenith sequoia]

What for bro 😭😭😭

Doing it for the love of the game bruh

[hollow fiber]

want it

[naive forge]

@lapis nova plate swapper

means I bought 10 plates for it

[lapis nova]

😭😭😭😭

[grand void]

2 a1 minis worth of plates lol

[naive forge]

https://www.prusa3d.com/product/something-fishy/

here ya'll go, something from prusa you can afford

[lapis nova]

Real

[random coral]

wah

just for the core one

not even for the mk4

its like 550 usd to upgrade to the core one from the mk4 i am not doing ts

js buy a used mk4s for like 900 cad

ik someone that sold one for like 800

[lapis nova]

@hollow fiber

[naive forge]

Welp, the wallet hurts from spare parts order

[lapis nova]

jeez bro

[naive forge]

Bought the H2S

[lapis nova]

🔥

[naive forge]

Yeah fedex will have fun

[lapis nova]

[random coral]

what the helly

why is it so heavy

[lapis nova]

Bought new big ass printer

[random coral]

I didnt expect it to be that heavy lmao

[lapis nova]

With all his parts im guessing

[naive forge]

Yeah same, was expecting like 60lbs max

[lapis nova]

[zenith sequoia]

can you 3d print filters

[random coral]

i wanna try this thingy out sometime

it looks fun

[zenith sequoia]

ye

i just dk if its feasible

[naive forge]

I mean you can, id just wonder if a glossy vs matte surface finish would change things

[zenith sequoia]

the thread is my concern

[naive forge]

@lapis nova abs-gf

[hollow fiber]

man i never get how you print shit like this with so little support

[lapis nova]

sexy

[naive forge]

Skill and slowly

[hollow fiber]

i still know nothing about printing so just auto settings for me

[naive forge]

I don't mess with a ton of settings tbh

[lapis nova]

.

[hollow fiber]

clean ass supports

[random coral]

Gah zamn

[lapis nova]

😩😩😩😩😩

[hollow fiber]

@lapis nova lol

funny print

[lapis nova]

Tf

[hollow fiber]

guess what is

[lapis nova]

Fuck if I know

Handle!

[hollow fiber]

correct

extension for pelican

[lapis nova]

Ah

[hollow fiber]

the idea is threading rope through the holes

i doubt itll work

but its fun

if not ill just adjust and reprint

[random coral]

Thing

[naive forge]

Thing

[random coral]

fr \o/

[lapis nova]

Yuck

[random coral]

L

[random coral]

Thing #2

i dnt know resin

at all

cant do it for shit

the thing has sat vacant for ages

[naive forge]

Resin is an involved process i have 0 care to get into

[random coral]

fr

[grand void]

@naive forge is there an abs or asa supplier that you can recommend?

[naive forge]

I like zyltech abs atm

[grand void]

they’re unfortunately not available here. Might just try jayo or esun abs since im happy with their other filaments

[naive forge]

Yeah, most of my common stuff is US/north america companies unfortunately

[lapis nova]

Fridge

[random coral]

do you guys think its possible to print a cage for the z5ii

i dont really even know what a cage is useful for but i wanna take som videos and i wanna mount random shit on the camera

[lapis nova]

possibly

just out of a stronger material

[hollow fiber]

if you have a good printer and material and modelling skills

[random coral]

modelling skills ehhhhhhghghggywygbeurf

[lapis nova]

Tinkercad my beloved

[random coral]

real

[grand void]

im no expert but i know this doesnt look right

anycubic has already told me that theyll send a replacement part but i cant imagine how this happened

[hollow fiber]

mint

[lapis nova]

Yeah I don’t think so pal

[grand void]

i wonder what caused the layer shift there

actually i managed to click it back into place

getting the new part is still good tho cuz i accidentally broke off a nose when replacing the hotend

i think thats a curse i carry with me cuz i also broke off a nose on my a1 mini lol

[naive forge]

idealy front cover is made to fall off on contact/collision and stop the print

[grand void]

yeah but it sits really firm and cant fall off easily. I also cant imagine with what it collided because the print was in a very early stage and there are no other objects in its way. Shouldve done a timelapse with the camera to see the culprit of that mess

[grand void]

i think its better for print quality when the head is fully assembled

could be wrong though

[grand void]

@lapis nova do you use enclosure heating for printing abs or asa?

[lapis nova]

nope

p1s doesnt have it

[grand void]

ill probably just use standard settings and go from there

watch the first print be warped as fuck

[lapis nova]

Just get Bambu

Shrimple

[grand void]

well i at least have enclosure heating so thats a plus

[lapis nova]

Mid

[naive forge]

Idealy you want that chamber pretty warm, like 55c+

[grand void]

nothing special but its getting somewhere

might diy a stealth press for the soldering iron

[lapis nova]

This clean asf

[naive forge]

buy a p2s

[naive forge]

been looking into that recently

[lapis nova]

Better be a screen only upgrade

I’m not buying a whole new printer

[grand void]

yeah but just because ive mounted most of the printing stuff to the pegboard. Might make a mount for the soldering iron too

[naive forge]

def more than just screen simply from that photo alone

[grand void]

my pegboard is completely full of stuff. I do have a second one though so could theoretically mount that in front of the soldering mat

looking at the picture i think the first pegboard is too high. Shouldve mounted it lower but cba to redo that cuz id have holes in the wall

[lapis nova]

🙏

[hollow fiber]

do i buy kekl

[grand void]

yes you do

with the ams of course

[naive forge]

https://www.fila3d.ca/boutique-impression-3d/imprimantes-3d/serie-p1/bambu-lab-p2s-imprimante-3d/

[lapis nova]

Yeah

[lapis nova]

I’m sorry what the fuck is this

😭

[hollow fiber]

nozzle probably

[lapis nova]

look at the big ass fan

that’s what I’m talking about

[hollow fiber]

keeps 😎

[lapis nova]

Normal p1s

[hollow fiber]

fun

[lapis nova]

I printed this exact model and there is no springiness to it at all

[hollow fiber]

sounds like youre stupid ig

[lapis nova]

what did u print out of

[hollow fiber]

petg

springs

[lapis nova]

yea I gotta do smth different

I did pla cause that’s all I had in my ams at the time

nylon

[naive forge]

Hopefully a good fan for once

[lapis nova]

Massive

[naive forge]

Mhm

[lapis nova]

I need to get rid of this fuckass screen

I hate it

[naive forge]

But hopefully that means its not a shit fan like all there others

[lapis nova]

Please be drop in replacement

🙏🙏🙏🙏🙏

[naive forge]

Doubt.

[lapis nova]

[hollow fiber]

then there will be no reason to buy a p2s lol

[lapis nova]

Yeah lmao

All I want is the screen

[hollow fiber]

whats even the upgrades

[lapis nova]

idk

Hasn’t fully released yet

[hollow fiber]

i think i used my a1 screen...

[lapis nova]

Tomorrow

[hollow fiber]

once

to connect wifi

[lapis nova]

I barely use my p1s screen but when I use it, it sucks

[hollow fiber]

everything done from desktop now lel

[lapis nova]

I have to change the software nozzle size in printer now

like

apparently I can’t do it in slicer

last time I checked

after the most recent update

[hollow fiber]

you just can tho lol

[lapis nova]

it’s bullshit

[lapis nova]

me when i cant

its bullshit

[lapis nova]

are you blind

i literally have that dialog box open

[hollow fiber]

change it

dumbass

[lapis nova]

can you read or nah

[hollow fiber]

change it

[lapis nova]

change it on the printer

i cant here

[hollow fiber]

just get an a1 ig

dweeb

[lapis nova]

ah yes downgrade

bedslinger for peasants

[hollow fiber]

its the same thing

same bed size lol

[lapis nova]

no

not the same hardware wise

[random coral]

[hollow fiber]

does it matter?

[lapis nova]

yes

[hollow fiber]

how much of the better hardware do you actually use

[lapis nova]

uh