#40k-minis-and-armies
1 messages · Page 133 of 1
I've been working on some Imperial Fists for my father, since he doesn't have the time/skill to paint them.
Space marines are pretty fun to paint
I’m currently changing between a Gladiator Reaper tank and a Krieg Artillery squad
Oh Ooops
This kriegsmans backpack was upside down

Lol same thing happened to me too when I was building the krieg killteam. Luckily I caught it pretty early
Read Elemental Council, there's a great moment where one of the characters realizes that all the brainwashing and stuff would actually be really bad in the long term and it trying to make sure the humans don't have to be brainwashed
Whoever decided the antennas on T'au helmets need to be seperate pieces should be fired
Womp womp
I had to place 3 antennas on my gladiator not hard but annoying considering a lot of the little bits are seperate bits
Initiate Leonus. C&C welcome )
Yee-yee ahh haircut,, drip is maddening
black templars, completed with a yee-yee ass haircut
They promoted me instead
Wait So im painting my skitarii like they're from stygies VIII and I read their colors are black robes with red markings, but I was playing mechanicus and I saw magos scaevola has a black cloak with red markings, do the markings color mean anything? Or is it just preference
they're their forge world's colours
and what do you mean by that stygies has the same colours as scaevola? Isn't he from Stygies as well?
Most of the stygias 8 art ive seen was black robes with white cog trim
If its black robes with red trim ill be thankful because painting white over black sounds like hell
ah I see, you wrote black with red twice instead of black with white 
I think the white or red markings are up to preference really
as long as the cloak is black and the carapace is red it should be stygies enough
think the markings being white makes it easier to unify all markings if some of them are placed on the red carapace
Just need to highlight the backpack a bit and I'm done with the top
I think this is my favourite so far
It's very colourful
I like the gun bag
I know right?
I got some new speedpaints and thought a bag would be perfect to try one out
I mucked up the half mask but oh well
Live and learn
Dang brother, the chapter serf done messed up your fade. Jk nice mini brother.
Many thanks!
New space marines make no fucking sense whatsoever. The tanks fly but the bikes have wheels
Its afraid… Its afraid!
Thats an interesting line to draw on things that make sense for warhammer
I mean why not have a hover bike option or a tracked option for the tanks because floaty tanks are lame
Tau called they want their fish technology back
It wouldn't be a motorcycle if it didn't have 2 wheels
Plus it's very difficult to hit someone in the face if you're floating 3 feet off the ground
I just miss when the repulsor was a dedicated transport and had the fly keyword
Total custodes supremacy
Also space marines still have hover bikes
At least 1 model
I saw one at a store yesterday
Named character
NOOOOOOOOOOOO WHY IS THAT REAL
Ask the artist
💔💔💔
I'm not surprised his face is odd. Iirc that's a 15 year old Finecast model.
(it's deffo finecast, not sure on age)
Ah no 21 years old now.
My first model should have gotten me shot
I considered it done at the time
its a shame a shotgun isnt valid wargear anymore
We dont have enough 40k shotguns
we used to have more 
GW got too many melee army employees that dont like getting blasted by shells
Not even deathwatch gets a shotgun with this new killteam coming up
Shout out to my breachers who have unique rules for different shells of their shotgun.
GSC Neophytes have both autoguns and shotguns, but they got turned into generic 'Neophyte firearm' 
also RIP forgeworld IG vet shotgun squads atleast you can play them as krieg engineers now
Your first ever mini should be something you look back on to see how you have progressed, this guy here was mine and he is perfect in every way
My first one was a dry brushed free space marine model that i made in the store
3mins Max
Only 1 color, no details and that’s it
They do have hover speeders, and hover bikes were a thing in the Imperium but the tech to make those smaller ones has been pretty much lost, even the hover vehicles of the Space Marines are rare, even the Land Speeder is only possible to make through the discovery of the STG design, and the newer Repulsor tank is fairly rare because "innovation" is a relatively radical concept embraced by Archmagos Cawl.
There are a few remaining hover bikes, however the tech to manufacture them has been lost so you normally only see the Custodes using ancient relic examples, and a few Space Marine chapters have a handful.
😭 we couldn’t figure out how to strap some anti gravity plates to bikes only lots to a tank 😭
tbf the tank needs a lot, it doesn't really fly like the Land Speeder, it shoves down so hard on the ground that it turns boulders into gravel and bodies into paste.
I imagine the main issue with trying to recreate the jetbikes is miniaturising the power sources so you can fit it, unless they find an STG design of an older model of bike it's unlikely they'll have any breakthroughs for now.
The main issue is whether GW wants to sell a different range of bikes 😂
I hate that the store I’m nearest to rn doesn’t sell English codexes
Well
They do have a 9th edition space marines one
i find them quiet good
Base time
Does anyone know if this Dark Angels decal is supposed to represent anything in specific? Or is it just another piece of heraldry flair
It represents lil green hooded guy with a sword
The Green Wing maybe?
Does anyone know how to start killteam?
thoughts and concerns? im new to painting my own models. ignore the shelf of dusty wolves
Looks great I think the axe handle needs a little doing up
Its great for tabletop standard, if you want to take it further though id say a lot of the coats are pretty flat coloured - picking out a wash and highlight colour for the red and grey to do additional layers could really add depth and volume to all his little details
@faint star a couple people have told me this, im not quite sure what i wanna do to it
and i might try my hand at edge highlighting the brass
I'd say make the handle itself have a bit more colour. Maybe it's the lighting but it seems to just be grey from the base to the axe head and it looks weird
There should be some variety there
on that point theres a little metal band at the top end of the grip binding you could do in brass, and the wires could be done in a darker grey/black wash/contrast to seperate them from the grey casing
thats a good idea. thank you
ah theres some wires connecting to the back of the axe head i didnt notice too, goes to show that picking out details is worth it to draw attention to them though 
@odd pollen
not 100% sure if making the power pack brass was the play
but i like it
looks like breaking up the grey was the right call atleast, looks good!
Orkbuster?
Farstalker kinband killteam
I realized in my 3 years of lobbying ive NEVER polished anything tau related
Just ordered one online and this shit needs 17 days to deliver
Actually gonna crash out
Not 17 days
17 work days
For nkt painting for 6 months i think these turned out pretty good
WIP of a very trustworthy space wolf
The most trustworthy
Just finished an aquilifer of the 13th legion.
The lions head is a bit mangled but I'm leagues better at sculpting than I was when I started.
I have a plan to make herald the hammerstorm
HE COMES BACK STRONGER THAN EVER
I am unstoppable because I can paint white now

Man I still SUCK at painting marines
Christ this looks like hot garbage no matter how I photograph it
Personal touch, when I paint space marines I always give my favorite sculpt a red boltgun
Not sure if its very practical for a chapter like the Raptors.
red gun casings are based and ultramarine pilled
*Dark Angels 😆
OG Ultras as well 
Has anyone seen a sons of anteus army? trying to see how they'd be painted but there's no reference outside of "black and grey"
I meant to say, Dark Angels look cooler 😛
I dig that
the superman colors, would love to see it painted
that goes hard af
I dont know how this dude painted this, but my god is it amazing-- also this is the color scheme I'm going for
my remastered captain for my imperial fists
Those are some insane looking Shadowkeepers 👀
I've seen worse
you got most of the mold lines too which is a huge thing
Another zealous warrior to the Sabena Crusade! Execrator on the field!
Love the grim dark aesthetic
im impressed by your camera zoom
Oh dude thats nothing
This is a bottle of army painter paint
Im on the other side of the room
Big Man......
person of heft
Packing mass
I’m not sure what legion to paint them
Might do Iron Hands or maybe DG
So undecided between loyalist and traitor still?
yeag
he's my first heresy kit that isn't a knight lmao
DG is probably what im gonna go for
lets me practice things like rust and grime
All my 40k kits are painted up in Carcharodon colours
I was thinking maybe Imperial fists because then i have the boxart to follow but I hate painting yellow.
Death Guard colours are just kinda nice
Iron Hands is a good shout too, considering the Chonk of the saturnine and the heavy weapons
wait is this alpha legion colours lore accurate with Saturnine armor ? idk the exact name of the armor btw correct me if i am wrong?
Well, I assume that the tactical dreadnought is in the correct colors for the XX legion.
my question was did alpha legion had stuff like this ?
ik its a stupid question i just wanna know
Every legion had their hands on such hardware.
Even the ones who aren't associated with things like that.
If the White Scars can have termies, so can the Alpha Legion.
Not sure about Raven Guard.
Raven Guard jump pack Terminators, an amusing idea
Just gotta do the decal but I think I can call this done
If you see a mold line, no you didnt
I am getting them this friday excidet af they finally arrived at local wh store
Testing out some schemes for my bugs
moon bugs
Oh yeah this is already turning out great
Oh that’s staggeringly good
Wip
guys quick question why guard dont have elysian drop troopers anymore?
or were there any before
in the long long ago in the before times of forgeworld
Another scheme
I quite like these Tyranid schemes
They look like how real bugs look
Especially that last one
What legion you painting him?
From the colours guessing DG?
Got my rogue trader proxy, he looks MUCH more like a rogue trader
Heresy DG
Ooooh, keep me updated, heresy DG are awesome
Yessir
Yay
Realized halfway through painting this guy i forgot the fucking mold lines because I bought him already built 😭 😭
Kark the mold lines,, looks awesome
Ha
None of the sculpts are unique iirc
I think its just 1 ogryn,1 ministorum zealot, 1 kasrkin, 1 psyker, 5 pox walkers and then the blooded kill team minus the enforcer and plague ogryn
For $100 not worth it
Yea they are all just current kits that are out but I found it for like 50 bucks at a random game store so couldn’t pass it up
Doing something but I don’t have grey
Kitbashed Bladeguard Veteran with Sword Brethren parts
Half of it is repacked Blackstone Fortress
The zealot, psyker (?) and traitor guardsman are all from Blackstone or it’s expansions
You know the Blackstone sculpts were good when they just keep popping up in newer GW kits
You reallt gotta invest in some good gray if you wanna get good whites
The whites fine
That was just taken shortly after putting it on so it wasn’t dry
nah the traitor guardsmen are the killteam one, the guardsmen in blackstone are all in a one or two sprews with the rest of the chaos change so james workshop hasn't sold them outside of that
James workshop?
heir to the mighty gw empire 
yeah, I've met james workshop, he said that the genestealers will come to darktide on the 3rd year anniversary
Just after they add the Eldar 6th class?
why would they add a corpse as a class
What about the death guard terminators the theorists say they are hinting at
oh that's simple.. GW saw non-astartes having actually cool stuff and removed it because GW is basically the ubisoft of tabletop gaming
Guard is just vehicles, they don't get cool infantry
Or maybe it was like 9 years old and they don't make them anymore
me when guard have awesome infantry
exception, not the rule
How many infantry squads do they need before its not an exception lmfao
If you ask me, just add more TYPES of infantry.. Melee focused shock troops, more Abhumans, Skirmishers, Droptroops. that sort of thing, and keep the infantry squads as is... yeah they probably just don't sell well so they got rid of the elysian models.. frankly, i just think it's time for optimism and hope to be thrown in the trash where they belong but that's unrelated to warhammer
We have drop troops, you just want your custom model for every single type of fluff. Which is fine, but that's just being weird
i feel like drop tropps and tempestus scions are different (even if they do have the grav-chutes)
Catachan coming in hot 2026 babey
no it isn't
temptus aquilons literally drop from orbit how are they not drop troops
maybe not orbit i dont know specifically
i don't know dog, i'm an idiot. i'm just not sure elysians are that similar to tempestus aquilons besides the dropping. since i'm pretty sure the elysians have special full auto guns
unless the elysians are trained up to tempestus level standards... then yeah, use those
Black Templar Bladeguard Veterans
You actually have the most insane white scars ive ever seen they are so good
project is done! I did one loyalist and one heretic terminator.
The loyalist is a Brazen Claw, and the heretic is a homebrew Luna-wolves based black legion warband
guard got awesome infantry
thats sad we dont even got steel legion aswell
Was quite enjoyable to add some sea green volumes on small plastic dudes after quite a while of doing other projects
Local store didn't have Buri :(
The thinker
Painting in volumes using an airbrush: I love this!
Blacking out rest of the details: I hate this!
random stormcast from my drawer
They give those away for free I have 7 different stormcasts
Someone talk me outta this
Wait for them to go on sale
you dont need them
Goremonger Progress
I need to get an airbrush so bad
My favorite style is heavy lighting and volume
Or whatever you call your style i guess idk how to put it into words
Man that leader model is freaky you did amazing
Thanks :>
@drez has a good reccomedation for a budget one, bought it like 2 years ago and it never let me down, I just forget the name and model off the top of my head
I just won't be able to get rn with my current setup
making my second ever mini a kitbash/conversion (still missing alot of small items/details, and has the wrong banner) but i'm pretty happy with how far it's getting.
Dawn of War inspired?
Name checks out.

Everyone is trying to find a sniper who’s camouflaged,. Nobody will be looking for a neon blue sniper, strategic mastermind
guys how do i make my brushes pointy again
"Youre all stupid, they're gonna be looking for army guys"
after using it on one or 2 minis it looks terrible
Buy brush soap, clean brush, pray
Blood sacrifice
Is a very nice blue tho
normal hair soap not working how brush soap gonna make a diff?
I mean.. its especially formulated for brushes
ok ill try that
And if you're using a cheap brush alot of the time they just kinda fray like that
mine are like 10 euros a set?
idk what is a expensive or a cheap brush i bought them few months ago from amazon
Very cheap
Not saying you cant get good results with a cheap brush but you'll have to replace it way more often than a good brush
can you tell me what makes a brush expensive and where can i get a brush that i dont need to replace after every model box
So im not an art expert by any means but you have 2 common types of brushes, sables and synthetic, synthetic brushes are cheaper and are made of things like polyester,nylon or taklon. The lower quality of the brush leads to thing like splitting, uneven stroke and curved tips, sables hair brushes are made with tail fur from the siberian sable, a good entry set of these brushes will run you around 60, being made from natural material they're less prone to the problems of synthetic brushes
DaVinci maestro makes good midrange sable brushes
damn bruh
@mint dove
yeah ill stick to my syntetic brushes
but can i clean them with brush soap and still works or brush soap is only for natural hair brushes
Those are actually a pretty cheap set...may pick those up actually
And yes brush soap will work on any brush
If I built my hearthguard with plasma blade gauntlets could I proxy them as concussion gauntlets by saying the blades are retractable?
Continuing the pain train of imperial fists I went for the servo skull on one of the models
My poor attempt at a reflection looks somewhat decent from afar I swear
Another wip
Gaalheri GAD-39
that set is $60-100 in the US and seems to be out of stock everywhere
No, importing it would just get it seized in customs and you'd lose that money.
https://www.dickblick.com/products/da-vinci-maestro-kolinsky-brushes/?Item=09395-1049 this is the closest I can find and its $75 and missing a brush, good set though
(Still W.I.P) Solar watch custode
Fellow Solar Watch enjoyer
Your white is a lot brighter than my current scheme though
my first model actually was an imperial fist, i'm pretty proud of him
i love the fists in all ways but painting them
i got a phobos strike team kill team box and dear god
i mean i didnt mind that much, i found a pretty good recipe that i like
what do you use?
i read all about different methods for yellow even tried some but i started off of the wrong foot with this set
cuz i primed gray
if i did it right i wouldnt have half the issues i do
so its entirely on me
but i keep going
while it isnt a masterpiece, i feel like mines pretty decent for yellow, esp for a first mini
i used the following:
white primer
imperial fist yellow
gore grunta + med technical 1:3
white drybrush
gentle layer of imperial fist yellow
highlight wiht 1:1 white+imperial fist
oh no yours is great
mine have issues with grime
or rather i have an issue with grime
i wash too much but i am playing with mediums and over all less intense washes and more reces shading on my marines
Yeah
I like it marble color
They're mine now
I'm gonna get Lucis and Ahriman soon too and see if I can use all 4 of them as Legionaires proxies
You preforming a ritual with your GoreBoys?
Trying to figure out a good scheme for my striking scorpions
I think ill do waagh flesh base, biel tan wash, warpstone glow layer, Moot green Highlight then ap vivid volt top most highlight
Looks like an evolution chart lmao
The sky just got a bit clearer
Typhus is just the best model ever
Honestly true
I'm keeping is original 50mm base to model it where I can easily remove and attach him to it
Same with Khârns' 40mm, thought it may be a bit harder to hide
I wanna start to grey knights but teir scale is so shit
If anyone got a grey knight marine and a primaris marine can anyone send picture of it side by side i wanna see how short grey knights are
I'd wait before starting Grey Knights
I wanna add grey knight terminator squad to my imperial agents army
God damn it
short kings
Castellan crowe looks good but damn normal marines looks too small
Do you got terminator squad of grey knights ? If it is possible can you send t side by side with a normal terminator
Even their terminators are smaller than an Intercessor
Itz zo over rn 😭🙏🏼
I got that one off google, larmoth seems to have found what you wanted
Changing my army thats it
valid
Crowe is probably the only safe buy in Grey Knights right now, everyone expects their range to get a major refresh in the next year
they ought to get an update at some point but it might be a couple years still
Realy?
But they just got a new codex
For 10th edition yea, but 11th edition starts next year
and the rumour is their refresh is going to be big in 11th edition
Then i wait
But still i am buying castellan crowe
My imperial agents gotta stay without an damn space marine god damn it
Yea he's like their only modern model
Ill wait bit cause scaling is realy terible
@ocean pendant i just looked into something and i assume they are small because of lore
Since they did not recived primaris gen update
yes they're first born but the models are still too small compared to newer first born models
Yea newer Firstborn like from the Horus Heresy compare better in scale, it's not a lore reason. Grey Knights just haven't had their range updated in a long time
The HH2.0 (and now 3.0) marines and Space Marine Heroes models are the up to date first born model sizes
You are just giving me every reason to not to start them alr boys i am open for suggestions what should my new army be
Well you could just buy heresy models and kit bash them with GK bits to look the part I guess
Switch from silver to gold. Custodes
Not bad idea tho but they got not alot of models i assume
Imperial fist looks sexy in these days
Very nicely detailed ones though, so it still feels like painting a lot of them /j
I KARKING LOVE PRIMING MINIATURES
square thumb
Why u no wear gloves?
Gonna take a break from marines n get back to my ork boyz long overdue here
The only gloves I had were too small
How are you holding them while priming, at their bases or something?
Wires
guys quick question how does allied units works
Oooh I getcha
You can include Imperial Agents units, characters and vehicles + knights to another faction
Just want an original space marine range refresh, terminator refresh was so damn good
Devastator squads are class
Just new proportions for grey knights and originals
that greykngiht refresh is gonna be so fucking good
Honestly that's probably better than getting spray paint on your skin
Like that shit is not good for your skin lol
it also can make you allergic to a ton of things like soap and processed foods due to the additives that get absorbed by the skin in the paints
Not to mention you run the risk of ingesting it if you handle food without scrubbing yourself clean of it vigorously enough
I had him in my army in TWH3 chill asf guy
“Chill”
He’s harry the hammer
Fuckin awesome
wut?
Any airbrush freaks here?
sort of
I ordered a steenbeck infinity, i was just wondering if i should get a cheaper airbrush in addition to do priming/varnishing with im worried i might eventually blast the expensive one if i use varnish/primer in it
Or do you just use your favorite airbrush for everything
shouldn't be a problem, some like to have a separate one for enamel lacquer based paints
but acrylic vanish and primers are fine, just clean the airbrush well
but having a cheap workhorse for those isn't a bad idea either, especially if it's a larger needle one
Alright maybe they are not as dirty/sticky as i imagine, also wondering if maybe i should get one just for the sake of not having to swap needles in the infinity for less detailed work or can you more or less do anything with 02 needle
I've only got one with a .35 needle that I use for everything and I've been thinking about getting a higher quality .2 size one
for vehicles you might want a larger than a .2
Hmm maybe i should get a decent quality bigger needle secondary airbrush for less detail work like priming 🤔
wait until you get the one you ordered and feel around a bit before ordering another one though
might be enough
I could get a sparmax one 0,4 needle for 50 bucks 🤔
I think maybe ill grab the sparmax 0,4mm for priming/varnishing/painting vehicles then and steenbeck 0,2mm for painting more detailed stuff
Vallejo primers are polyurethane which are a lot more sticky so it'll gunk it up quite good if not thinned enough
I'd use lacquer primers if I had a more well ventilated painting station
I have ordered vallejo black surface primer, what do u thin it with?
vallejo airbrush thinner but water is okay too
Aight
adding a drop of vallejo flow improver is very nice as well but adding too much will cause the paint not stick quite well
Gonna try the gaahleri apex force compressor i heard they got some almost abusive discount going on. 20% off anniversary sale, 20% more with a referral link for a total of 40% 🤔
Looks a bit overkill tank size but very quiet
Wpuld thinning ushabti bone with lahmian medium instead of water make it easier to work with?
doubt the difference would be substantial
it'll probably handle slightly better but coverage will be similar I feel
Dammit. I've tried every bone paint and NONE of them play nice
Army painter, citadel, vallejo, pro acryl
Nobody makes a fuss free bone paint
I'd try thinning it with an ink instead
They make bone colored ink?
Not quite probably but a mix of a couple should do
Anybody got a black armor recipe that's not fuckass eavy metal style
do you want mine
Prime black, dab with black grey and dry brush tan grey highlights. Panel line black. Pick out areas of the model with a nice contrast colour like red purity seals
I doubt I own any of the paints you use however I am also intensely curious, so sure
Black base, cover all with corvus black, mix a dark highlight of corvus black and fenrisian grey, mix a lighter highlight using the same paints, mix a spot highlight using the same paints but add a drop of any warm white or light yellow
Add a blue wash before the penultimate step if you want a bit more cool finish
Or do what eons does. Zenithal prime, dry brush white and paint over with a mix of black Templar contrast paint, leviadon blue and nuln oil
I can never zenithal prime again it was a nightmare
But I do love his recipe its solid
I’ve never had issue with it I rattle can
What's a spot highlight? Genuinely never heard of that term
I couldn't get my grey seer to come out right on my chaos black
Like the very lightest highlights
Ahhh ok gotcha
Small spots almost
Thank you!! I will give it a shot
I definitely just suck at zenithal priming
Achieve that and then contrast it’s a doddle
With rattles you gotta put them In warm water and shake it like you don’t like it
otherwise can be grainy
I use hycote
I thought the warm water thing was a myth ngl. But that definitely makes sense
I got a black a grey and a white. My white is gloss you need to wait until matte the black and grey are fully dry
Ive never had any problem with grainy texture until I tried to zenithal as well tbf
Airbrushed are 100% superior tho
But ye I all over it in black from a medium distance
Be sparing
But cover
Then from a tilted up angle the grey
Put model on a lazy Susan spinning plate as you do
then from directly above and bit of white
Then dry brush cold white for highlights all over
Makes the model look life size
Panel line too for added depth after
Use oil for that, it goes in nicely, mix black oil and thinner
I ended up not using contrast paint with these, didn’t have any
They’re almost raptors but I went with khaki. Custom chapter
Im going for a look like each member of thr kill team is from a different warband
Right on. I recently did the same squad but did em raptors
I do really like the look of Corvus Black as a dark slightly blue charcoaly shade 
Jerk 0 matic's recipe looks really good but even a simple drybrushing with Etherium Blue can have a really nice result if youre planning on painting a large number of models
I got some old inquisitorial stormtroopers im planning on painting in the same way
Tried some seraphim sepia
I'm still very messy but damn it looks miles better than straight up dark washes
thank you mr mini acrylics for the flaming hearts it makes me feel good inside
appreciate it 😄
you a real one
hey are the agent of imperal any good or just look cool
What about 1:1 mix of lahmian medium and Cassadorean Yellow?
If you’re still struggling to find that right wash
seraphim sepia seems to work just fine so far
but i'll be sure to remember that
i also got a recommendation for an orange wash cant remember the name though
Fair enough, you use what works best for you
The only one I know is Cassedoran yellow
i wanna do something fantasy nex time
im pretty sure it was something orange with name but now that i look you might be right
Oh, then no idea lol
I paint tanith honse
For my first time doing this I expected far worse. Very proud of the final product.
guys my wallets looking real thick and the imperal agent stuff cough abirators cough looking real good in pink
I tried SonicSledgehammers recipie for "Marine juice" wash on the white here and its absolutely great
Give everything a dirty look without dulling thr original color
Just a couple of good boys
250 kroot hounds
I’m just starting and was wondering what army I should choose. I’ve looked into the black templars. Necrons. And the aeldari. Any advice??
Painted this for my kroot tracker but the colors I chose make it looked like a statue, any ideas for making it look more alive?
Which one do you think is cool
Put some brown in its feet and beak and it should sort itself out
WIP
Gang gang
Totally not blood raven gear
Here's some of my very poorly painted T'au, I'm still figuring out the process but I think i like the colors
Is VMC pale sand a good screaming skull replacment?
Double barreled flamer?
Sick
Its a pyrecannon
Bird up!
what faction is this
is this also wh40k?
I really like this scheme, if you want to add some battle damage to your freehand work you could get swipe at the yellow with a thinned down version of your armor color
The picture's a bit desaturated I think, it's a vibrant orange color, that's a good idea though
Even better, blue and orange is a fire combo. I can see it more now im just blind
Nah my friend thought it was yellow from that pic too it's not just you lol
The knee pads are the place where you see it orange
Yea
two more a bit further, won't be putting just as much care into the rest of the squad as the sergeant
gorgeous work. You're using aerograf ?
Cheers
very smooth
The airbrush step, the rest is brushwork
my man how big are those
compare to primaris marines
since i am switching to horus heresy
ah we got a saying in my occupation 1mm is not a mass
its so sad you cant play iron warriors in 40k
well you can
just buy hh mk3 and play those as 40k csm legionaries
works like thath?
what about the weapons
mk3 set only got bolters and legioneries got idk bolters and more
there are equivalents for all available weapons
basic legionaries are just bolters anyways
guys what would be a good first army
my wallet is capable of probably 750ish points
This is my worst work from all of my models and i am realy furious about how they look terrible
This guy is next
yeah the blue and white look a bit thick
First time painting something on this scale, it was so much fun
just cant set myself to paint a world eater/alha legion slit corpse
I think levi's and war dog knights are the perfect upper end of paintable vehicles
regular tanks and the larger walker just feel like a slog
also the panels become too big to cover neatly
Having a good spray paint helps
How did you done your hazard stripes?
Don’t think I could done something this big without the Leadbelcher Spray paint… was going to originally get the Vallejo Gunmetal cause I thought Leadbelcher would be too bright, but honestly it looks really good
Vallejo Pale Grey Blue for a white undercoat
Army Painter Desert Yellow for the Yellow
I used Tamiya 10mm masking tape to plan the lines
Then just a mix of black with a dark blue for the stripes
vallejo Jet Exhaust (the air paint) brushed on over black primer also works wonders
Then I shaded with Army Painter Grimdark Shadow, then Agrax Earthshade on the edges for the weathered look
Cool i am planning my next as mk 3 iron warriors
Nice, those were my first ones before I got the Mark IIs
Both are really fun armors to paint up for them
Yeah i am trying smaller models rn and its ass to paint
I'm gonna do my next primarch
Hand painting the hazard stripes is rough, but do them enough and you get the hang of them haha
That’s lookin good so far
Bigger models are much more easier
I finally got screaming skull to play nice, I need 2 coats and i just had to double the drying time of paints I usually use
btw guys how can i make a muddy base
any tips
like i wanna do something like a nomans land
also i wanna add barbedwire to base
Vallejo texture paste>agrax>drybrush a warm brown
You can also get infinitely more mud out of joint compound for a similar amount of money that can also work as snow and create wells that could hold resin. Only downside is that it's a bit messy and you have to make sure you adhere it well
i gotta see what is joint compound
is there another way to do it with paint perhaps
I'm out of country but here is an example of what it looks like dried.
Realistically you need to buy something other than acrylic paint, that could be as easy as a technical paint that is overpriced imo, you could have modpodge and glue actual dirt and seal and prime for texture, you can buy/3d print muddy bases that are sculpted, bottom line for mud though, it will require some sort of textured element that acrylic can't provide unless you don't care about it being flat
You could technically do green stuff but thats like painting massive terrain pieces with your fancy paints vs a generic acrylic tube, gets expensive fast.
I forget what I have, but I think it’s a Vallejo base terrain tub that just has a mud texture and color in it
thank you its on my list now
If you want something thicker Vallejo also does a weathering mud for tank treads and stuff that I like to use to build up dirt under things
That looks great!
Thanks!
Hell yeah
Progress pic
guys for ironw arriors what kind of masking tape is good for shoulder pads ?
3mm or 1mm
Opinions
Nice tank
a whole lotta dakka absoulty amazing
Almost managed to do the highlights on the greens on all of them before my attention span gave out entirely
certified hell yeah
Did a Termie as an Imperial Fist
Finished the Warden boi (except for the spear glazing but doing that when the full squad is done)
And also because I needed a break in-between, a funky lil Luna Wolves marine (or at least, the colour scheme)
maybe thin your paints a bit? but still a good job mate
thats a very nice imperial fist
Nah I like the messy look of it
Flawless Blades, looking good
First try at pallid hand, I kinds messed up doing an all over wash instead of a recess shade
He can once again sit under my TV to appease its machine spirit (he sat with his gun painted since last October)
Poor Miku, who take her hands off??
All the greens have been highlighted, will probably do the decals next
Probably Celestine 😂
Is this an official GW helmet? It looks so sick
I knew it
These are GW though, but I filled the mouth grills with milliput
my sons
Your money must burn...
I can see if they can hold on it for me
fucked part
There was a pack of chaos sm for the same price
thats like 54 dollars
Nice
Anyway 2 terminators are ready
I have an imperial fist and an ultramarine
Next ones blood ravens
Part of an wh sculpture im working on. Last time I've painted something was ages ago. What do you guys think?
solid
current need to build my DG terminators
"Oh Boy! New toys to play with!"
I can already tell lucius is gonna be a bitch to fit on a 35mm base
That paint looks really thick
I like it looking messy on imperial things
I mean you’re loosing fine details on the model
painting with thick paint isnt a replacement for grime and weathering
Funny how it’s neither of those
Those are awesome, love me some capes
Capes make everything cool, I don’t care what Edna thinks
No capes
Heretic reinforcements inbound 
May have gone a bit far on the battle damage
Which looks better? #1 or 2? Im trying something new, option 1 was done cleaner to eavy metal style and option 2 I kinda just let the will guide me , as you can see I went kinda far in some places
Reminds me of my original imperial fists
They still sit with pride of place on the display shelf
Nice
Kasrkins painted as loyalist moebians
its gonna be a pain to paint the Lasguns
Its ultramarine blue and some Grey Seer?
thoughts? Closest thing I got to Moebian Sixth and 97th elysians

(If I got the color schemes wrong, pls tell me which citadel paints I should use)
I like them but I think the weapons need something to break them up a bit
alright and thanks
I’m just gonna repaint the camo and man I hate how random it looked

I'd also generally say the same should apply to your main models too I like the base colours but I see that you've left a lot of the details unpainted which makes the entire thing kinda homogenise. I just gently coloured one in to show what I mean
alright and thanks again
I forgot to mention I dont have the paints smaller details
For the visors its green but strangely on the camera its not shown properly
💀 💀 💀
Ahh
i made it green because Nox Alpha slowly changing them

The subtle hints of their corruption
also The Aquilas for Moebian Six is yellow?
Uh which yellow paint is good?

my bad, I meant which Citadel paint would be good 1-1?
Retributor armour
thanks

For a citadel paint it looks like kantor blue to me
Sorted out the decals, painted all the lenses and gave them a bunch of bruises. Probably time for oils tomorrow finally
Love me some beaky helmets
Errr guess the parts that don’t match the main body
Omg
Is that
Solar watch
I like mine more Marble ish
Gonna do the blades later
Shitty picture but oh well
What did you use for the blue gems
Kinda fucked up the eye
And the middle tjingys
Thoughts so far?
He's missing a head I think
Its on a stick...somewhere
By the nine that’s gonna be sick
Clean af
Mechanicum Thallax Cohort
Those eyes lookin CRISPY
Tried to make it look like the smokestacks had fire inside of them, im not sure i did a great job, would love some idea on how to do it better next time
It is yeah, I like mine a little more baroque so switched to warmer whites
As for the gems, abaddon black full cover, then sotek green on the bottom right, blue horror around the edges, a dot of white scar on the top left, and then cover in hardcoat
Hardcoat?
the technical stuff that makes it all more shiny
Ardcoat, not hardcoat
cuz orky
basically just some transparent glossy paint, I use some on the lenses too
If you want I can give you my entire paint scheme
Fun fact you can fit the sword Termie without base perfectly into a gladiator
He's having fun
Oiled up
Where are the naked chests? 🤭
Afraid the kit doesn't come with tehm 😔
Vonryans leaper from somewhere in October last year
Unfortunately only one was fixable
Damaged the rippers and then decided it would be cool to have them on the leapers base
What looks better, the one on the left? Or my first attempt from last year on thr right?
Oops meant this one
i like the colors on the right better
plus the highlights on the sword are done better too
Oh im not done with the sword yet, I gotta go back and do some glazing
Also the arch light does not take great pictures
Did a little extra work, thoughts?
i think the verdigris on the bolts looks a bit polka dotty
I mean its supposed to be JUST around the bolts, also nihalik oxide runs like crazy and I ain't chancing thay
Suitably dark and menacing
Shiny boi
left is marginally better skill wise
so you are improving
Very nice
First test mini printed on our new 3D printer
Work in progress
Hell yeah brother
Getting closer, just need to do the metallics and to apply the decal.
Good luck it looks great so far
MILK FOR THE KHORNE FLAKES
Realised I could do more on the Void Dragon so came back to him last night.
Melta bros!
"I cast, S H I T. Y O U R S E L F. N O W!"
"Hey loyalist, catch!"
And they called me a madman
That’s probably because you are
We all know the guys with the helmet accessories are the best ones
You might have a point...
I’m sorry but is that below a bed
Did you do a black hemlet for him?
yes
His helmet is Abbadon black and looks like the void
That's actually quite a cool idea
It’s actually the helmet colour of the box
The back of the box is coloured as the Sons of Horus and has the Sergeants helmet in black with gold trim on it
ohh, I don't have the mk iii box so I've never seen that
Oh that is because on phobos pattern bolters, you can see the rounds in the magazine
I put my ammo as black on the main bit and leadbelcher for the actual ammo
oh fair enough
I think it goes nicely as something they would do
Simple black container and then the ammo as leadbelcher
does the job certainly
Enough boxes to start your own store gyadayum
Hold on is that a Mk.III tactical squad I spy in there
you have improved
I'm scared of painting these two, especially the pistol one because shes so cluttered
Next time build in subassembaly dawg
What is that
Its where you build the model but leave off/use poster putty to hold problem bits on
Like arms that cover chest, backpacks etc
Then when you're ready to paint. Drill into a place you wont see like the shoulder joint and glue a toothpick/paperclip in to hold it
@regal nexus like this
Head backpack and arm are seperate
The old one 
oh i need extra tools for that?
Not really
Not necessarily, buy some poster putty and optionally a $10 pin vise and you'll be fine
Thoughts? I went farther with the blood and dirt paint this time because I assumed the grenadier would be around alot of mud and blood...because explosions
Thallax of the mechanics, I confused it for tau
Well, will these do for now?
Do the taste test
Thallax are the Mechanicum's go to shocktroopers. They were eventually replaced by Skitarii because Skitarii are easier to produce. According to the lore, the Ordo Reductor still has some hidden away in the 40k time
Oh
Didn't know that
Really cool lore though
Thallax are almost completely machine. It's just a skull, a spine and some essential organs wired into that body
Like how some girls are almost fully plastic?
Jk
You mean the Kardashians?
Yeah
Sort of, but infinitely more useful
Got it
Their standard armament is a Lightning Gun but with the new rule set you can arm the whole unit with Multi meltas, Phased Plasma Fusils or Photon Thrusters
Before you could only put two special weapons per squad
Photon Thrusters are fancy las cannons
It's also the gun in the picture above
Plasma Fusil
Multi Melta
Each box only comes with enough parts to make two of each special gun but I'm planning to make three sets of Thallax. One with each type of gun
Sounds good to me, pal!
Arbites done, they got the mastery skins on
Cleannnn
Found my first mini while cleaning my closet, my first vs my most recent
