#40k-minis-and-armies
1 messages · Page 97 of 1
gotta learn killteam adn then teach my friend how to play killteam 
The first one of the death guard patrol
recommend nuln oil for the white bits to give it that dirty muck look
Nice death guard
Yeah I thought about it but I like the white look
Alright alright
Does anyone know how to make a good-enough red glow for a forgefiend's underbelly?
I swear I heard something where you use white and then put red over it
What?
Oh, thanks!
There are a few ways, but its going to be easier with single pigment paints, so you'll be forced to use fluos if you want to use hobby paints, and those fade very quickly
I'm still tryna figure out how to paint my taus
Bada bing baby
So if you're painting with contrast paint and you get a base paint on a spot you painted with contrast how can you clean it up? Because it's not thick enough like a coat of base paint
CLEAN IT THOROUGHLY AFTER EVERY USE
Clean it in beteween colours
clean it after you clean it
Also don't lose the tiny nozzle, or overcrank it. Those tiny threads don't take a lot to break
In my experience yes
You can add thinner to them when you transfer them to dropper bottles
Dropper bottles?
Yeah thats fair i hate these bottles
Can i get dropper bottles in bulk from somewhere?
Nice
Also get a bag of little steel ball bearings to put in the dropper bottles
It helps a lot when shaking them up to mix them
Gotcha
and funnels that have a small enough spout to pour into the dropper bottles
I found a cheap 4 pack i might grab for now since i only plan on using a couple olors atm
The next one
WIP. Any comments... beyond those ugly hazard stripes
And what are the best paint for heat effect on the muzzle?
I paint the spot over in the primer's color or something similar and reapply the contrast
dioxazine violet
ill have to google what the warp that is
The guard army has begun for realsies now!
Folks who magnetize marines/other 'humanoid' units, what size of magnets do you use?
1mm X 1mm
for infantry
Although i don't actually do that much cause it's a huge pain
I was magnetising my aeldari bases for transport
but then I got lazy because it took an eternity
Update... still wip...
the pigment that most violets and purples use, the pure version of it is incredibly powerful
its transparent and lush
Trying to convince myself to not go crazy with blood for the blood god
I have a new mission of getting all of the Horus Heresy Primarchs
Just started my new guard tanks (by new I mean it’s been in my pile of shame for 5 months)
What colors?
Wish I could paint like that
Real
Thank you, still need to work on some weathering on it but so far so good, base coat is done
aw dude same lemme grab my russ too one second
I have another tank that’s pretty good but I messed up the wash and now it doesn’t look right
Russ posting
I also have a blue tank
Russ posting
Noice
There has been a change in the plan
Blue has been abandoned for the sake of purple and silver
Scratching metal tends to pretty universally make it shinier
Began Painting my custom chapter
Yeah i ended up just using stormhost silver with sponge
Scratch if off with your nail/a pin is generally your only option, drybrushing base/layer paints over contrast is essentially 90% of my painting tho so could be something to lean into
I keep a small drawing pin nearby so I can target-scratch before it fully dries
go black in the middle of big ones. makes them stand out more and gives them dimension rather than looking sponged silver splooges. you can go silver straight line scratches too
That's great advice, thank you
ngl, with the orange-ish background color, the stripes make for sick tiger stripes
Also I like the pale white skin, instead of beige
the gunmetal parts also need a bit more shading in my opinion
Actually
A catachan regiment with a tiger-stripe based camo pattern, I like that
should note it for later
I'm just already dreading having to paint all these uniforms bases in orange/yellow
I'm also currently painting a regiment with the base uniform color is white, and I use corax white
yes, I like pain, how did you know
What are you? A masochist?
Okay, gonna look into that one, thanks ^^
That's like the single worst white paint on hte planet
joke aside, I know the general consensus for Corax white is that it's bad, but for some reason it applies very nicely for me
usually a single coat is enough for a full coverage
Which I know isn't how corax usually applies
I bought it once, and it was chalk when I opened it
I don't know what's with it, if I got cursed or blessed, but it just works
I echanged it for a new pot, chalk again
The the dude at the store said that I was never gonna find a good pot
maybe he just got a bad batch of paints?
but hey, again, I know my experience is very much the opposite of what painting with corax usually is
Corax is also amazing for me for some reason
It mean it does turn into a texturety chalky paint on my wet pallete after a few hours but i just get more
Looking to weather this thing. Probably some bud effects on the bottom of the tank, some scratches, chips etc. any other suggestions?

How primaris see first borns
I didn't even think of thatm..
add some muzzle burns to the gun barrels, blacken the metal just near the exhaust and maybe a slight oil/fuel spill on that barrel on the back
People definitely exaggerate and a lot of the more active people in here are all long time hobbyist and you tend to get a little snobby after a while (justifiably most hobby paint is actually sold at scam pricing and quality relative to other industries)
Citadel paints are useable for sure, most hobby paint is perfectly fine to use. But the difference in quality between corax and a truly nice paint is night and day
It's like playing a shitty guitar: once you get a nice one you can't go back to the shitty one even if you sounded fine playing it
Okay unironically super tempted to do something like this for my tzeentch horrors
The official models are ugly as sin and wayy too expensive
Might find a way to make them a little more gross and eyeball-y but I kinda prefer this as Tzeentch turning space marines into silly little guys for his amusement rather than the original meatball minis
Does anyone have advice for weathering 13th Penal legion troops? I would like to make them look dirty and I don't know how to go about it.
You got AK streaking grime?
That's generally seen as the best way to easily weather and dirty minis
no I dont have anything like that
You can thin it down to not be as much of a rough tint
I have stirland battle mire
Battlemire and texture paints are good for covering bases but not the best for weathering often as they'll comepletely cover up the paint and detail on anything they're painted on
Add some decals
Adding that before I start weathering
Something I did with my tanks are make the treads look dirty
https://www.youtube.com/watch?app=desktop&v=QvsFy0eK298&t=375s if your interested I found that at the end of the vid
In this video, I will show you how to paint warhammer tanks for your Astra Militarum regiments! I have chosen to paint this in camo colours of the Cadian, however you can replace these colours with anything that suits your army! This is a relatively quick technique that doesn't need an airbrush or oil paints, so you can get your motor pool where...
Actually used that video for the tracks
Cool
All finished now just need thier bases done also I lost one to my cat eating it so I had to order a new model off eBay
is it the only grey paint you've used?
If you're going to disagree with the fact that corax works for me as I want it to, it's not gonna be a very productive conversation
I know corax is infamous and generally not good and I suffer from some of the drawbacks of it but it suits me for my purposes somehow decently which is why I was amazed that I still use it
Also Im working on my valhallans again with my greenstuff resupply
I'm doing valhallans too!!! Sick
Did you green stuff the baggy pants or am I tripping?
might be the angle or I may need to add more green stuff but its supposed to be the greatcoat I just tried extending his coat. Saves me money from buying the plastic krieg every time
Ohhh yeah i see it. Either way, it's an awesome touch.
It should be fine when its got some paint on it
yeah just need to wait for the gs to dry and that takes a day
A bit more progress....
No I'm asking if it's the only one you've ever used. I've never heard good things about it and I've never used it myself.
Keep in mind that I also say that yellow is not hard to use because I understand that it's a transparent pigment and not opaque
Oh it's very bad
Sorry I just assumed you have tried how bad it was and thought I was vouching for it being good.
No not at all, but there are people that I do know claim it is very good
It covers well but it gets very chalky and....weird after sitting for a little bit
Well that is because it contains a lot of chalk and kaolin
That is surprising to me, never thought chalk would be a thing in acrylic paint
God paint is so weird and alien to me
Some of the highest end goauches in the world, They use chalk to make the paint opaque
The difference is that they process the paint well
Chalk can do a lot of really good things to a paint
I use chalking a lot of my paints
The difference is is that when people talk about it they don't call it chalk
They call it calcium carbonate or marble dust
I hear horror stories about corax white rattlecans
That is the kaolin
Kaolin is literal satan
Anyone who says kaolin is a good pigment needs to be locked in a mental facility
I absolutely despise it
Not only is it gritty and awful even when you grind it down to one micron
It forms aggregates all over the paint because it dries the paint from the inside out
The only reason why you would ever use it is if you're trying to make a primer
Because yes a primer is actually in reality very gritty
You're trying to build up as much texture as possible so you get more adhesion, flat primers don't exist, That's just a marketing trick
You need more surface area so that the paint can get into those grooves and that requires having something like kaolin so you have a very sandy chalky surface in reality
Now there are gessos that exist that don't have it, which yes is a type of primer, but those are to prevent absorption from porous substances
I can make a really huge rant about kaolin if you can't tell
Sounds like it deserves it ngl
Geologists and pigment nerds like me sure a couple things in common, our appreciation for rocks, and our hatred of kaolin
I appreciation however is different because I like my grounded up into a fine powder and they like theirs not touched
Even the GW employees hate corax white lol
I remember when I was first buying all my paints I grabbed corax white and the employee told me "it's not My place, but I implore you to grab any other white paint"
I bow in the light of your big brain, sir
They all do
wish there was 1/6 scaled space marines
those are called squats, basically midgets in power armor
Midgets….
valhallan ogryn
The thiccening continues
Best assembly instruction ever
CHUNKY BOY
@rare hornet Opinion requested - with the colour mirroring I've done what colour do we think I should do the crotch plate - and the chest panelling?
Do crotch plate black on the ride and pink left, opposite of how the legs are done as for chest I think we need to have a think
green eyes are great
not even primed the spine carapace bit yet lmao
I've done the shoulders purple and I'm doing the flamer bracer-shield in black so might do the chainsaw arm also in black and the chest plates in purple
Yep, I printed the moc parts
Fr that I have that box too and those minis go together so easily lol
It's honestly a real nice box, I've gotten a lot of mileage out of it for different armies
I've got magnets on the bottom of the base of the mutants so I can upsize them to 50mm bases and run them as chaos spawn
Plus the cultists are handy if I ever need to run extra cultists in general, I'm getting the dark commune box too so I can build the cultist kill team from it
Lol sorry for wall of text that box is real good
The purple chest will make work well, maybe try like a purple centre spine with the edges black for the carapace? Kinda like this?
the spine works better on questoris and dominus marks
cerastus don't have that spine
wait
ignore me im dumb they do
literally sat in front of me XD
but yeah I could do smth like that!
Do look forward to getting my own cerastus one day
I had some spare time and I went to GW shop not planning anything to buy. I just grabbed the box when I see it. they look so goofy and dope
40mm cultists with wings, sign me up
They are great, definitely use a retailer as £120 is way too much lol
I'm tmpeted to pick up another questoris and do another weapon config
eventually
for now tho I got plenty to work on
Yeah Imma get them as a bonush extra to my knight army, for now i need more armigers
Yeah I've been tempted to cop a chaos knight for a while too ngl
Apparently they're one of the only decent ways thousand sons can get access to anti armour
I'm fussy about how my minis look tho I feel like I'd end up 3D printing so it looks "right" for ksons
Thinking of lancer and gonna run him as a sort of house chmapion of my knights
That or castigator
if castigators had longer swords
or could actually pose with the blade instead of being stuck at that right angle
Are there any knights with big staffs? Lol
the lancer technically
Nah I was thinking more like wizard staff lol
you could maybe repose it - remove the shielf and have it doing a hand-out gesture and convert the lance into a staff
in fact
True the shape of the actual lane would be cool for a staff and I feel like you could use a Tzeentch endless spell or greenstuff a big book for the staff head
Hmm ideas
hang on i have a good idea
one sec
You could mirror a pose like this
easily change the topper of the lance to be something more ornate and staff-like
Honestly I proxy models really often so it probably wouldn't even be a bad idea to look into some tomb kings or Ossiarch Bonereaper stuff tbh
Probably nothing that quite lines up size wise but even just bits would help sell it
I want another lancer so I can do a pose with it resting it's hand on top of the shield and the lance on the ground like it's resting a sword in the earth like this
That'd be dope
I love when they have like human poses on mechs
I think that's why farsight gets me even tho I'm not a Gundam guy
mildly ashamed(?) admission my lancer I copied from goonhammer's post about it on release
(not mine this is goonhammers)
Nah goonhammer is based honestly
colour scheme too, it really stood out to me
love the pose, really nice bright colours
not super far-ahead in terms of technical painting skill to where I could realistically - and did - match it to where i'm happy
I wanted to do this but my basing skill is non-existant
Yeah it's funny BC orange and white are two of my least favourite colours on their own but together it looks real nice
I saw a salamanders successor scheme a while ago that was orange white and cyan and it looked so nice
originally my knight was gonna be ksons blue but changed my mind because I didn't like how it looked on brushwork
I have found my favourite trick to get super nice smooth schemes is drybrush work, lol
Yeah drybrushing really unlocked a new level of painting for me tbh
oh no im using it not as a highlighting thing (but I am) but literally using it for blocking colours
Especially BC I use so many colours you can kinda just build a cool tie die effect by wetblending and then drybrushing in layers
like the purple legs I got that entirely using drybrushing on the legs x)
I mean it came out pretty clean considering
I'd have guessed you airbrushed or used like an enamel paint or smth maybe
Also I found a lifehack
I don't own an airbrush X) I don't veen have a painting desk myself I just do it on my pc desk in my room
For anyone who's a Ksons/daemons player you can get a box of 24 Seraphon skinks for like $20 less than it costs to get a box of blue/pink horrors
Add some eyeballs and stuff with greenstuff and they're almost better than the normal ones lol
YEAH we’re making progress
First of many tiny tanks ready
I would say go purple as the flamer is black
Then the carapace will add a lot more black to it when you get there
Incursor sarge done, halfway finished with my combat patrol
Well painted, not done, still need to do the base and figure out how to do transfers
Give him a wash with nuln oil if you want, will bring details out
This really makes me wanna get a knight
Ok so ive painted the black, but now idk how to cover my orange again since its only an airbrush color, it doesnt paint on the same with a brush it feels
Well i guess i order the trollslayer base
Highlight it?
Quick 15 mins work. This model is fun.
i wanan make post heresy pespero spire guard but im really struggling to din either kitbash ideas or models to use
After some decals and wear and tear
Tesseract glow makes for a good green, was this or waystone or striking scorpion
Thoughts on the following for a 1k points dark angels list:
Unforgiven Task Force
- Lion El Johnson (380 points)
- Azrael (105 points)
- Apothecary [Stubborn Tenacity Enhancement] (65 points)
- Intercessor Squad (5 models) (85 points)
- Hellblaster Squad (5 models) (125 points)
- Ravenwing Landspeeder Vengeance (160 points)
- Vindicare Assassin (80 points)
The list comes out at exactly 1k points. I'm well aware it's top heavy, but I'm finding I really don't like fielding a huge army of a bunch of high model count, weak units that lose half their models after one shooting phase from my opponent, much less fight phase. My idea is to have the Lion and the Landspeeder stick together and charge ahead, since the Landspeeder can easily keep up with Lion and stay near to ensure he always has Lone Operative. Azrael, along with the apothecary, lead the hellblasters for some serious plasma firepower, always overcharging because they might get to shoot again if they die, and the apothecary can return one model per round anyway. The intercessors touch objectives and follow in the wake of Lion + Landspeeder charge to nab objectives without me having to actively camp them. And lastly, the Vindicare Assassin hangs out somewhere backfield and pecks enemy characters the whole game if they give him line of sight.
I'm still fairly new and this might be a very half-assed list that won't play anything like I'm dreaming up, but asking here for thoughts and feedback. Thanks!
Saw this dude for sale on eBay and might honestly get, looks dope and I’ve never heard of this figure before
What a cutie
Hate how he is bald
How do I paint big plasma gun
You should give him goku hair
“Now I’m mad, now I’m really mad!” As he watched Horus pull up
He can 1v1 Horus
What colour do you want it
Juanhidalgo has great, easy plasma tutorials for, like, 7 different colours
Probably the normal blue glow
Gunner and gun left to do...
Current tzeentch daemons. Painting 6 flamers next
nice
I've noticed a funny behavioural trend in my time
People who play Admech and Votann almost always leave the edges of their base clean and only base the top and people who play chaos factions may as well dip the whole base in their basing paste lol
I'm in the "cover the entire thing" camp but I get why it looks cleaner to just have it on top
i leave the sides/edges clean so that i can somehow touch the mini...
same with my Black Templars...
This might be an imperium wide trend lmao
😂
I forgot to ask what you used on the horrors' eyes
Just guessing it looks like maybe Talassar but I'm not sure
Valorous Heart Love
OK so if I use skinks as my blue/brimstone horrors: y'all reckon running Saurus gaurd as my pink horrors will "match" properly?
Bearing in mind I'm gonna be using a skink Starseer as my daemon prince to help tie it together, I can't find anything else that looks "right" as a pink horror otherwise and the trick of using skinks as proxies is too cost efficient not to use
base the coils wait, slap a transparent color over it. This is 99,999% of tutorials out there btw
thats sick hes got a cool coat
I got funny glowing paint I might just use
fugitive, fades quick if you expose it to light, keep it locked up so no one can see
I don’t think it’s fugitive
It’s this shit
Tesseract glow is fun asf to use
Mine separated and I think it’s ruined
it wont melt it however it will make it flexable and weak
Ive been experimenting for about 8 years with different chemicals to see what can strip FW resin well
and nothing so far hasnt caused a ton of problems
they dont mix the resin properly and its hyper porous
Im thinking about replacing all my base paints with pro acryl
Still need to do the glowing part
3rd company 2nd squad intercessor sergeant with power fist
So I primed my intercessors a few days ago but goofed up and didn't prime the underside of their arms and such. Is it a good idea to do a few more sprays of primer from the underside just so they're all covered?
You'll be fine
You don't need every single ounce of the miniature primed
Paint doesn't like just evaporate off naked plastic
I'm not trying to be snarky i was trying to make a joke sorry
they are mid, but better than most student grade hobby paints, the white is at least mediocre and not dogshit, so a massive improvement
I love their metallic dark silver paint so much and i like how they thin easily (imo) and the dropper lid
Gotta be better than citadel righg?
sort of, they are chemically similar last I checked
i think the difference was proacryl hired an artist paint company to make the dispersal medium
Lol no worries I didn't see this. Was cooking dinner. But good to know. I didn't know If it wouldn't stick
Also for my first army. Is this a fine lineup?
This is blood angels
This is orkz
As I am fairly new at painting (on my 10th model) what paints would you recommend going forward? I have been using GW paint since that's what the paint guids tell me to use.
So I am 100% biased, i am not new to painting and not one of those "ive been painting for X years types" as I have taught at accredited art academies before.
It is entirely based off what YOU are looking for in a paint? Do you want pure opacity for nothing but layering technniques and a bad kind of glaze which doesnt function as a glaze all that well but good enough?
Or are you looking for utility and high quality? Do you want to mix your own colors or buy 40+ of the same color type?
Personally I tend to suggest things like acrylic gouache and golden, but proacrylic fits the needs of some people because they like layering a lot, which I dont, I prefer glaze techniques because I do a lot of sfumato
Productive day of painting
Trying to get all my boyz done by February so I can devote all my time to painting gazghul
Up until now... I think I have just been layering. What are glaze techniques like?
Looked it up. No I have not been glazing the models
Not gonna lie glaze painting looks a little daunting for someone who barely knows what he is doing now 😅
Don't think I'm ready for that yet
Get layering/highlighting down first lol
My thoughts exactly. I'd like to do it at some point but I want to build skill up and knowhow first
Is it a good idea to paint over already varnished miniatures?
It’ll be fine as long as I apply another coat over the spots I touched after I’m done, right?
Nvm got it figured out
Clean yellow!
Thanks! If you look close it's a little spotty.
But it I'd only 1 coat
If you plan on playing thats perfectly fine!
Unless you're entering a painting competition, anything that stands out at tabletop length is a good standard
can someone go tell forgeworld to stock up asterion moloc again, impossible to get without paying 300bucks for a single mini since they removed him :(
the only spacemarine id ever want
meticulously slopped this marine in whatll later be very rusty brass
right now he just looks muddy but das aright
just realized i glued the legs on backwards on my free mini titan lol
oh well, it was free anyway... haha
the directions i had were too blurry Dx
If you used super glue you can try and freeze the model and the glue ought to give out pretty easily
generally no but it depends on the varnish
you cant do good glaze methods with hobby paints, it makes them wonky and weird, its not hard to do, you just need transparent paint
I'll keep that on mind when I start experimenting with it.
Do you include speedpaint/contrast/shade paint, or do you mean the traditional layer/base paint.
I dont include those ever as their surface tension prevents them from making good glazes due to most of them having flow improvers in them
a glaze needs to be two things, not have a flow improver, dry much slower than normal paint
normal paint can have a flow improver in it, just not recommended as it can cause build ups around the edges
hence why 2 thin coats is sort of mediocre
remember im saying good, im not saying you cant do them. it's just an uphill struggle
i am all about working smarter and quicker, not struggling hard
Rock and Stone!
Real
Is the drukhari obsidian rose armour effect painted on or is it a simulated visual effect (light effect near sharp edges)? Same question for night lord lightning (do they go under or over grime and chipping)?
Depends on what youre looking to do
Generally speaking theyre just paint effects, not actual armour bits
Obsidian rose drukhari are part of my hobby pipeline, so I'm trying to figure out how to paint them. The citadel painting guide basically says "highlight the edges 2 times", so it doesn't tell me what to do with round shapes (female kabalites) and large panels (vehicles), as well as how freehand art would interact with panel edges.
For night lords, painting them clean is simple, but if I want to add gore, mud, freehand or chipping on their armour, I'm stuck with a similar question.
Theres a whole load of better guides than citadel paint on youtube, especially for Drukhari
as for that, i personally would add it over the lightning, since its a decorative paint
Fair enough
next Predator underway, very nice how just over half an hour's work starts to look good on these little ones
What do y’all think would go good with the black?
Did you prim the model
The cape looks really nice
Appreciate it
There is gold all on the edges but the angle kind of blurs it out
Which is a Womp Womp
When are you going to paint the big guy in the background
Whenever I have the balls
I don’t want that goat of a creature to be ruined by my palm
It’d piss me off
so true
Real
That’s stating to look sick
a darker black
I have one black
Wait
I have two
I’ll put some of the other black on half and see how it looks
A non-borked camera view
Or did you do that on purpose to showcase the model
I took a pic through my light
Hold on
Shit I can
Helps me see better detail cause I don’t have a 600 dollar set up and 30 dollars was my best alternative
Also I lied
The other one is just grey as shit
So I could prolly just do multiple layers I guess
I don’t really know
I think I coated my lungs in sliver paint
Yikes
Speaking of silver I chose Leadbelcher as my second color
Cause it kinda goes hard
Lead Belcher goes crazy
That’s what I’m saying
In what order should I drybrush highlight color on my ork skin? I based it in waaagh flesh and I have Elysian green skarsnik green and ogryn camo as highlight colors
Im going to answer it this way, figure out what you like best, then I'll tell you how you were wrong
I'll let you know what I choose lol I still have to paint the teeth and metal bits and do 1 more coat of yellow
Based Starch
I'd lean towards oggy camo personally
But highlighting with more of a "clean" lime sorta green is also a good option
https://www.myminifactory.com/object/3d-print-the-doomed-cultist-208693 Pink horror
https://www.myminifactory.com/object/3d-print-starspawn-mangler-204213 Blue Horror
https://www.myminifactory.com/object/3d-print-starspawn-duster-204215 Brimstone
Found these sick lovecraft prints that I'm gonna use as horrors bc the GW ones are ugly as hell
- pre-supported files by Atlas 3D are INCLUDED -
If you like cosmic horror and bizarre monsters, consider supporting me on PATREON. Patrons get sanity-shattering value on bundles of new and unique minis every month, a 30% discount to the VoidRealms MMF store, influence on what I sculpt next, and more!
—
While excessive consumption of stardust f...
- pre-supported files by Atlas 3D are INCLUDED -
If you like cosmic horror and bizarre monsters, consider supporting me on PATREON. Patrons get sanity-shattering value on bundles of new and unique minis every month, a 30% discount to the VoidRealms MMF store, influence on what I sculpt next, and more!
—
This is a twist on the classic DnD Starsp...
- pre-supported files by Atlas 3D are INCLUDED -
If you like cosmic horror and bizarre monsters, consider supporting me on PATREON. Patrons get sanity-shattering value on bundles of new and unique minis every month, a 30% discount to the VoidRealms MMF store, influence on what I sculpt next, and more!
—
This original starspawn has a variety of ...
Is it safe starting a grey knight army when they'll probably get upscaled soon?
all you would have to do is change the bases
if they did
On the road to finish the bike...think tomorrow it will be done...
What’s a good website to get STL files from
there are several... my mini factory is huge for example
Thanks
This whole channel;
Dumb question, but are these plastic kits?
NOOOO
?
Just buy him
Dudes like 20-30 dollars
Plus I think you get an alt position for the axe
Oh i thought it was a launch box exclusive model
30 dolla
I like 30k models more than 40k at least for the space marines
They just look cleaner idk
if youre in the united states this typically goes for about 15 bucks on ebay @short pawn new on sprue
Fair, I never checked eBay
Trying to get used to checking it more since you can get more variety compared to Amazon
Local game stores have online stores on ebay where they sell things new for under retail, and many sellers sell single minis out of boxes
Yeah
Dang
I saw a Horus figure for like 70
And Alpharious for 60
Wanted to get him but they were sold literally an hour later
Sucked
If your chapter prefers using old tech or has an arsenal of hh wepaosn then you should totally run it has a terminator captain or something! The Hh space marines are taller then first born so it should work
In 40k I mean
I don’t delve too much into 40k anymore, I’m doing more with Horus Heresy at the moment (not that I dislike 40k)
If I ever do a 40k space marine chapter I want them to be completely littered with Heresy tech
Armor and everything
The chapter master would deff be rocking Preator armor
My only issue is I’m not entirely sure who I’d want them to be a successor chapter of exactly, I wanna do death guard because they rock (pre heresy) but obviously in 40k they are Plague marines so it kind of blows
You could do a n iron warrior successor, maybe they prefer old tech then new and found a stack of old death gaurd tech
3rd company, 2nd intercessor squad done
Burning the midnight oil with this old boy
Every traitor legion has at least one loyalist successor chapter that either splintered from the main legion pre, mid or post-heresy or was created from geneseed that was preserved from the traitor primarchs so you could plausibly have your chapter be death guard successors (or ex heresy death guard) who splintered away from the main force really early, maybe the heresy tech element could be part of the lore.
Mortarion and his legion liked using the bulkier mk 2(I might have the number wrong) armour and generally refused to integrate new technology into the legion unless it was things like adding thicker armour plating so you could have your lore be that your guys decided Mortarion was a shit leader and defected to the iron hands before becoming their own chapter
Upscaling is generally pretty easy you can typically just glue your whole mini base-and-all to a bigger base size and it's an instant conversion essentially
Downscaling is where it gets tricky generally
He's asking if they'll have a range refresh.
I'm expecting blood angels and grey knights getting new models around their codex releases
Which is, after summer 24, hopefully
A bit cleanup and weathering need to be done... then i call it ready...
@plush swift ended up choosing Elysian green>skarsnik>ogryn camo, for highlights, also used a little screaming skull to highlight the tips of the muscles
Finally done... 2 left to go...
Just bought the tufts ^^
(no advertising!) greenstuff world having multiple tufts like that
Tried something different, not sure I like how it turned out
looks good
Time too PAINT
much stuff to do... have fun
And where is the photo
No it's time to scream at them, then you paint them
The screaming helps the paint adhere
Honestly I want to scream at the leapers (those things arms where a pain to glue on)
So silly rule question, can I run a gene stealer patriarch as a broodlord seeing as they look really similar?
Kill team box arrived today and my friend lent me all of his Tyranids to paint BC painting was the only thing keeping him out of the hobby
Feels ridiculous to have this much plastic in one sitting
As long as you explain it to your opponent I can't imagine any sane person having a problem with it
Lol I'll take one in the morning, just got into bed and My setup is downstairs
Yep anything on the right sized base that looks "right" for the role will be fine to use,
I've seen people run genestealer magos, stormcast wizards and Orruk Shamans as alternative infernal masters/chaos Sorcerors
Actually my current infernal master is a literally an orruk shaman with a headswap and no one's ever minded
Also damn this box is packed
You are the only person in the warhammer community that has ever muttered those words btw
I'll keep that as a back up then
I have been struggling to find a brood lord in any of my local shops for some reason
Very likely lmao
I haven't even put together my cadian battle force yet. only the 2 rogal dorns
Are tanks any fun to build?
Absolutely yes
That should be fine but obviously, fair warning, older vehicles have the worst instructions ever
Building my valkyrie and I was in tears because it doesnt even show you the side where the stuff needs to be it's like just bad
Oh yeah by "buy a rhino" I meant "kitbash the Sisters organ tank within an inch of its life" lol
I would if I wasn't absolutely in love with the idea of a massive piano tank
Just need to shave all the icky imperial stuff off lol
baneblade was unironically a joy to put together and it took me 17 hours straight
they're the big boy guard/SM tanks right?
The largest guard tank that's plastic IIRC
Yee those things look sick on table
But i made mine with the capability to swap between turrets so thats why it took awhile
if they fit yeah
Oh yeah taking that extra time to magnetize everything is so tedious but nothing feels better when its done
I've only gone as far as having my SoT's have swappable heavy weapons
Infantry hordes are fun though
I honestly just basically made it all friction fit, I cannot magnetize. I have cheap chinese drills and complete DOGSHIT random variabley sized magnets. It is NOT happening
I desperately need to shop at magnet baron
Agreed I'm not a huge fan of vehicles aesthetically but I see how they're useful
I do like Ogryn....
Tho I'm one of those mentally ill people that would try to run full infantry guard
ogryns kits are super fun to put together and probably my favorite warhammer 40k model of all time
it's really not fun
I wanna find a way to use a shieldgryn in ksons somewhere but I cannot in my wildest fathoms come up with a kitbash that would work for it
Exactly!
though I will admit I am a sucker for a good tyranid monster
Other than the obvious "with enough extra tentacles anything is a chaos spawn" approach because I have 6 already
Astra Militarum tank sizes if anybody is interested
Chaos spawn maybe (IDK if they're the same base size)
THATS WHY THEY CALL IT THE CH*DE TANK I GET IT NOW
The banned words in this server never cease to amaze me
I can literally say fuck
"If the tank doesn't fix the problem, get a bigger tank"
Tank Tuesday
Is that a fucking baneblade!!
sir yes sir
Nice
hellhound and deathstrike are two more vehicles i want very bad
im still painting my valkyrie interior then i can assemble that bad bitch
also idk if its just me but tank sponsons look really lame
Is it a safe bet you're running an artillery guard army?
im really just gonna run...every guard army at the end of the day
i have enough for 2 different lists, mechanized or infantry focused
RIP your wallet
its already dead
Gonna go to hobby lobby tomorrow for some new brushes since mine all have hooked tips now. Any brands you reccomend?
im also starting a dark angel army when that new box comes out...so
i wouldnt bother
go to michael's
Are you single
michaels
i also work at a hosptial so i deserve all the warhammers
If I spent that much on warhammer My wife would literally kill me....so I just don't tell her
Me too. That'll be Mt new justification
ill be honest my guard army was fairly cheap, i probably spent 400-500. what REALLY fucked me over was KILLTEAM
"I got piss on me today so I deserve a box of toy soldoers"
I SPENT SO MUCH ON KILLTEAM
You are a nursse???!!
Lol no just a monitor tech right now. Currently in school for radiology
That is so commendable. I'm trying to work my way thru the hosptial to get free nursing school
Nursing is a hard job. The reason I like radiology is because it makes about as much as a nurse but with almost no time spent WITH the patient lol
Also it helps that I have like...the worst bedside manner lol
But so do all the other Techs so I fit right in
all your problems go away when you learn the age old tactic of breaking down into tears in front of a rude patient
It helps that I'm a big guy so i get put with all the combative patients
But there's always those guys that think "yeah I can get past him and leave"
Spoiler alert
No. You can't
Why are all ork players friendly giants who could definitely tear you in half if they wanted to but are just sweethearts
I have yet to meet a "That guy" ork player
All we want is roll dice, see 6, roll again, sinple as
ngl the day i meet a "that guy" im done playing the game at that store forever
Will not put up with it
i just opened a bag of dice and they shot across the room rip
I was talking to the guy who runs our local warhammer store about buying gazghul but asked If I have to paint him goff clan or if anyone will call Mt out for painting him in bad moons colors and his response was "if someone is such a dork to call you out on a paint scheme, you don't wanna play with that guy, and we don't let those guys play here anyhow"
HUGE
You should get yourself some matching ork dice as well 
My lady made more progress on her thousand sun-flowers today
She liked the green trim,making it look like vines
Hype!
I couldn't physically handle that much trim so whoever does it has my respect
(and jealousy)
she's insane for that 😭
She's already fabricating new parts with green stuff too

I cannot express in mere words how based this entire concept is
Like the whole approach to where the colours belong is so fresh I never see people paint ksons like this
Some people just be craftin' man
Please send the image of that one when its completed i bet it will be insane
She's going to buy the combat patrol and paint all the tzangors as bumblebees
Just minecraft 3x3 up there
I tried greenstuff ONCE for making custom Ushankas...never again
man i thought i was quirky when I made my age of sigmar models grimey, that's such a cool idea.
I'm going to buy her the mutalith vortex beast for valentines day because she had so many plans for it already
For fucks sake I knew that the background was wrong on Plastic's one
If the paint sticks to the model, it is a success
i have to dig for my dice now and im sad
Silver lining, now you have a fun scavenger hunt
Also i wasnt kidding this is where all my hobby money went, into killteam
I'm literally doing the exact same thing rn
i regret it so much....
Got like 8 kill teams so I can sucker my friends into playing
I'm gonna buy the kill team box just for the cool orks
Tbf it's working my friend got himself all of the nids
The box is highkey really good value
I'm quite impressed it almost makes up for the robbery that is the hierotek box
Getting 3 of my friends into it and they love my killteams
im trying to paint my ork combat patrol for my buddy soon as a surprise but GOD
I HATE ORKS!!!!!!!!!!
Plus you get all of your barricades and some real nice orky scatter terrain
and the tokens and all of that jazz
I saw it at the store and I thought it was mispriced, 20 minis,terrain, 2 books and a board for 99 bucks sounds unlike GW
You're telling me buddy
you should see underworlds. it's also somewhat fair pricing
Yeah I've heard a lot of people say warcry is really fun too
warbands are 40 bucks each and have everything you need to play, including rules and cards
I just painted 20 of those bastards and it is exhausting clean up
big box sets are 90 and have 2 full teams, dice, cards, everyrthing too
Like just as a game system
warcry is so awesome!
its super super simple but its still so fun
plus all warcry boxes COME WITH DATACARDS????
AHUHHH??
If only killteam did that shit....
Oh yeah my dumb ass needs to resell the daemon datacards bc I bought them assuming they were index cards and I was very much wrong
I just wanted to have datasheets for my fkn scribes man
(also heart of ghur is some of the best looking thematic terrain in recent history)
That might be the first time in human history a warhammer fan has ever said that lmao
painting them is frustrating to me
i've probably spent 7-8 hours on biceps alone
I mean I'm yet to paint my kommandos so I'll probably check back in with an actual opinion either way soon
i have this really weird problem where I try to over-do simple concepts because im trying to challenge myself to learn painting as fast as possible
Oh, also they are largely mono-pose
and pushfit WITH FUCKING SPIKEY ARMOR
Nah it's a good habit for any hobby, actively practise the shit you're bad at
Oh no they're push fit?
The only push fit mini I've ever enjoyed building was the pyschophage and thats because I cut off all but two of the tabs and glued it anyway
That works very well for the orks boyz
I had to, i couldnt do it anymore
push fit is literally so garbage. cant even pose your soldiers your own way
-my disappointment with fellgor ravagers being pushfit....
THEY'RE NOT PUSH FIT FUCK YEAH
the kommandoss??? Thats huge!
Oh yeah the kommandos and Krieg were never push to fit for Octarius
Okay so odd question, can you glue a mini to a decorated base with normal plastic glue?
I’ve always had the mini on the base and used the texture paints around it but in this case I can’t
If it's GW then I'd say a cautious yes
I've never personally used one tho
Oh wait you mean after the texture paint and stuff?
Fair enough, because with the cape on the mini I can’t do it the normal way
Nah you kinda can't, its hard to even super glue it sometimes
I thought you meant the pre decorated hero bases
Oh no, just a flat 40mm base I’m doing for a custard
If you know where the feet will end up: just sorta avoid that area and it should be fine
I usually place blu tack where the feet will go and peel off after basing
Yeah it’ll have to be the way I go about doing it as the cape just blocks too much
Not a bad shout
Keeps the bit completely clean which lets you use plastic glue otherwise its gorrila glue all the way
I originally tried a third party base add on but they wouldn’t sit flat so I took it off and I’m going with simple Martian dust
What do you mean decorated? Plastic glue needs a contact between two plastic parts to work
But yeah you'd probably want to use super glue if that's not possible
Is that the space marine board game
yesssir
It's really just an introduction to 40k and the rulebook is...littered with inconsistencies and errors, but the captain titus model is sick
it certainly helped me drain my bank account into 40k tho lol
Honestly no idea, I’m running on minimal sleep right now 😅
Ah 😄
I think I’ll use the blue tak idea though
Essentially I’ve taken the marble base away and going to do him on a Martian sand, problem is his vape makes it next to impossible to cover the base while he’s on it
I need a recipe to sickly pale skin tone. I want it close to grayish white but still show the definition
Excellent autocorrect, thank you for changing cape to vape. Because that’s exactly what I meant
You could try pinning him
the marble base is really awesome and fitting for the custodes
I agree, but they aren’t flat so the base sticks up on one side
Ahhh gotcha. Shame
Otherwise I would have stuck with them yes
Mix gauss blaster into zandri dust and then lighten til it's the tone you're after, shade with soulblight grey then highlight with some sort of grey or off-white would be my instinct, not something I've tested but I have good intuition for paint mixing
Also I tested it before I actually sent that to check it works
Ends up looking like this pre-shades and highlights
How do y’all keep that fine tip on a brush? (Specifically so you can paint tiny areas like eyes; not so much how to keep bristles from deforming/splitting)
i want to do a similar conversion
i kinda dont like how paragon suits look normally
Tyvm, good main color. I can try base and shade or base light blue and glaze that one. I'll try
I roll it on my tongue
Dunno if I wanna pivot from this color scheme or keep it. I think it looks neat enough
Looks sick!
Command squad built earlier, gonna be a long week of building to get this army set for a game Saturday
Damn that’s a good idea, I’d likely do mid heresy since I imagine my home boys are pretty faithful to big M and shit
But thank you
You need to stop
Every time you make this joke Corpse loses a year of his life to raised blood pressure
I use my palm, like everyone should. I also roll it on my palette because I'm not an idiot and know how to do that
I'm trying to break my bad habits like testing consistency on my thumb and trying keep the brush away from my mouth. Keeping my brushes clean made them last long enough for me. when they eventually split I just buy a new one and use the old one for basing and stuff
Wait is testing your paint/removing excess paint on your thumbnail bad?
Like
I'm not gonna stop doing it
But is it?
I found out doing it on palette works just fine and you don't end up with your fingers looking like modern art piece
Nah I like the drip tbh
I've got like a Fulgrim thing going but somehow slightly less manly
As in the long flowing hair or the serpentine body sorta thing
Holy hell a fellow tau painter
I do strange things to my warriors
@plush swift
I need to know exactly how upsetting you find this
Bro literally bends it with his bare hands like it's just-mixed greenstuff
Also how fuckin sad is it that there's so many of those guys that the group needs to name itself that
I dont bother testing consistancy on a finger, I just learned rheology instead
sunlu/elegoo basic blend.... gross... No final cure, great i cant wait for them to get health disorders and the paint to melt off randomly
Bros getting roasted in the group but not enough imo
People are actually taking the post seriously it's wild I feel like I'm watching a doctor recommend a new cigarette brand in the 20s
Holy fuck
It's the 20s again
What's stopping me from hosting large extravagant aristocrat parties where I am mysteriously absent for long periods of time and yearn for forbidden love at the end of the pier really
Lack of money? 🤣
Because you’re actually hidden away in a secret room painting minis
Holy shit we are back in the 20s fr
How thick cork might this be? I like the size compared to the suits
I mean, lack of brittleness can be an upside in a miniature, but I wouldn't risk uncured resin for that result.
Oh yea I totally get why someone would want resin that isn't brittle
Hard to tell, they’ve torn it apart from all sides but it looks one maybe a little more than 3mm thick
But it's hard to weigh it's benefits against skin cancer yknow
5mm? the base is 3mm thick, so it looks roughly a little less than double that.
Wine corks might be the way to go in that case btw
They look a little more natural as rocks than the measured sheets (those are better for building like rocky terrain and "landscaping" stuff if that makes sense)
Wait those are battlesuits not troops
My sense of scale is wayy off lol
Hm kinda tricky to sculpt with those, no?
Yeah they're better for like surface level rocky debris generally
Sheets can look a little "Minecrafty" as normal rocks
Just bid 80 dollar on a Heresy Knight, hope it works out
Side project of mine
I ought to source that KT box
It's a solid box! I did have to kitbash a couple of specialists but I was able to build every type of specialist I wanted
I currently have too much to paint
half my arbites, a whole box of navy
plus I don't play so it's just for army-having purposes
Still thinking about if i want to order that box cuz i want the rotary gun as heavy weapon 🤣
fair! I've been playing Warcry for a bit, so this is my first foray into Kill Team with some friends. I grabbed the Hearthkyn Salvagers box and the Tau Pathfinders box, so that's my next project once I finish these guys
The Rotary Cannon was the first weapon I decided I wanted to build 😁 I painted that guy yesterday, so the pic is a bit further up on this page, but I got my hands on some Contrast Medium today so I feel like the paint looks better on these guys than the dudes I painted before!
This is the last Votann unit i painted recently... The Rotary gun has good stats and nice abilities (for 40k i dunno' about the KT rules)
I really dig the paint scheme!
#40k-minis-and-armies message here are the earlier guys I've painted, before I thinned the contrast paints out for the ones I did today
ah those! I like 'em very much...
Thanks.. my paint scheme is a custumized inverted form of the angry marine paint scheme 🤣
Second Predator is shaping to be even better than the first
appreciate it
I’m about to print a whole ass dreadnaught
you and what army
Does vallejo have a color pretty close to grey seer?
Grey
well done
cheers!
Love seeing your legion imperalis minis, I really want to try that game out someday
ngl i thought the box set was done and gone due to how fast it sold out, didn't realize they'd keep restocking a new niche game
If I knew that I could have had it for christmas 😭
oof yeah they tend not to drop games like that right away
But which one! Vallejo loves their grays
The one that looks right
Are you suppose to wash a print first and cure and is it the other way around
still wip, but fuck me gold trim is painful 😭
very happy with how the fatigues turned out tho
Badass color scheme
Y'all what Ork clan should I paint my Kommandos as?
Leaning towards Based Moons but idk
Anything that's not Goff
Red Sunz
blood axes or deathskulls
I just did mine without thinking about a clan, painted their jackets purple, pants black.
Wash than cure
tanks
Bought some 3rd party flesh tearers decals and I'm kinda bummed because it seems like the size that's supposed to be for shoulder pauldrons is too small while the next size up is for like terminator shoulders 😭
Does anybody know if there's a conversion chart for Citadel to Pry Acryl?
Looks sick! I would add some blood and internals to that SM torso, though.
I lost my patience when I was edge highlighting
dominus spotted
Yep
Was out of red 👀
technically yes
but nothing for the new formulas for either
which are fairly different
are the fumes from resin healthy to smell
Curses
Prob just gonna stick to their metallics then
to be fair, citadel changed their blends recently multiple times too
and will this year too
pigment costs are changing, which means two things
the blends change, they get more expensive, and the pigment load gets lowered
I really just wanted to toss out my castellen green and get the pro acryl version but i dont want too drastic of a shift in their tone
Ah man i'm struggling right now...
By toss out i mean donate to friends
Wowzers
@short pawn I found an app that shows color matches for all the mini paint brands from 95-100% accuracy, pretty cool
Called hobby color conversion
its closer to 60% accuracy in my experience
but I am also more attuned to slight variances than most are
I was about to say I could probably show you 2 nearly identical paint splotches and you could tell me the different pigments in each
I'll try it thanks
oh nice! where did youi get that mini id love it for necromunda
It's from the space marine and servitors box set not sure if still being sold
oh really? wow the mini looked liek shit on the gw site
Yea I agree but I cleaned it up a bit and did a different paint style
No that's a different set
It's a tech marine and servitors set 4 servitors and 1 tech marine hard cast not plastic and not nickel
Yep that one
I had to bash multi melts and space marine plasma cannons and I magnetized the 2 servitors so I can switch them out
nice
The new servitor in the inquisitor kill team box is nice too
i had an idea for a necromunda gang that was a failed guild that specializes in servators
That's a neat idea I mainly play 40k haven't tried necro yet
necro is a kitchen sink you can do basically anything
which is why i lvoe it
I made the servitors to field with my tech priest to defend him as he repairs my krieg tanks
nice! i didnt even know youc an take servators in militarum
Yea it's a detachment that can be feilded with the tech priest discovered it one day on accident
If you look at the tech priest it says you can bring this model in with 4 servitors
My ulthwe so far
Why does he look like he’s made out of legos
I WAS THINKING THE EXACT SAME THING
Compared to everyone else he’s so colorful
@plush swift here's that ork from yestersay
Brushed Elysian green>skarsnik>og camo
Now why am I wrong lol
The pictures make it look worse than it is because the lighting is shot lol
For a comparison here he is next to the same ork, unhighlighted
I've always traded my orks from any boxes I get. But I've kinda really wanted to paint some lately. Especially with all these washes lol
I would call those highlights, yes.
Let's goooooo
I drybrushed phalanx yellow over the armor panels and I'm gonna use dorn yellow to pick out the corners
I personally run a paleish ork green
Orks don’t need drilled barrels so long as they think it’ll work
it's ok
I have the excuse of painting astra militarum, so lasgun barrels are too tiny to drill
I'm Gonna try and play around with a few different ork skin, it would look silly to have every unit be the same color
Like this is my last squad of boys
Very messy, not too proud if these
they’re orks so you don’t need to be picture perfect like with space marines or chaos
you can just slap shit on and if it looks a bit off, just say “ork”
the nurgle effect
He looks like a baby with a gun
if the blue was any darker I’d think he was a starship trooper
Corvus Cabal come in sets of 9 so guess who's cultists are now 3 different aesthetics entirely
Figured I'd grab this moebian looking ass and call it a day
traitor captain looking ass
Went to a warhammer shop and they gave me a model for free to paint. So basically posting my first ever painting of a mini
Congrats, only suggestion would be make sure to go over bits like for example the shoulders and the chest if you notice the colour pokes through where it’s quite thin
Nice dude, welcome to having crippling debt
That goes hard
May have had the realisation that I need to use like half the models from my other field ordinance kit just to fill out the other arty gun but fuck it it’s cool
I noticed, but at the okace i already spent 30 minutes standing and using their equipment 😄 wanted to do mainenance and recoat it
but im gonna focus on those for my coming set
i was about to blow 300 on an imperial knight and a combat partol set
had to stop myself
What combat patrol
was gonna start with the black templars
British
Nice
Not even
french ?
'merican
That is American right there
look at the flags
I wanted to get the Admech patrol box when I got into Warhammer but I painted the Skitari and realized how annoying it was
bruh
British
where that's from btw? Proxy?
Just trolling
mb was uncalled for
Its a heavily modified Spacenam model
S’ok, where I’m from French is a slur
Ah, spacenam
I did look at those a while back, they looked good
That goes hard
I would imagine that being Senator Armstrong if he was in 40k
“You gotta break a few Eggs, Jack.”
Real shit
Did some minor kitbashing between the two terminator boxes for The Heresy. nothing crazy but I like how his posing turned out
He’s ready to throw hands
Right?
Dude is deff the captain of his terminator squad. Gonna cook up a name and lore for him
“I don’t know who this Horus is, but when I find him his ass is mine”
I’m gonna field my 40 mk6 and 20 mk3 into 40k wish my luck
Real, If I ever do a 40k army I just wanna port my Heresy models into it



