#40k-minis-and-armies
1 messages · Page 81 of 1
carefully
Free ungor flesh
Edge-highlighting is best done with a thin brush, preferably with stiffer bristles.
You want your paint load on the brush to be really light, so it doesn't drip or flow on the panels themselves that you're highlighting.
Rather than the tip of your brush, you're going to scrape the side of the bristles very lightly and carefully along the edge you're highlighting
edging sounds hard

DM me, I'll give you a full tutorial
How bad would this fuck up the mini
I think the general rule is 99% isopropryl if you can find it and not to use anything that contains acetone as that will react more violently with the plastic on the mini than it will with the paint
doesnt affect plastic that much, but also doesnt affect acrulic paint much, take like 100 hours to strip
im super drunk so not tonight
You need to use 99% isopropryl, this is useful for getting rid of stuff like streaking grime tho
im be yelling about cyprus and burnt umber from differnetn regions
but not paint
factually incorrect
IPA is a secondary alcohol and used as a catalyser so its mediore as a paitn stripper
correct
doesnt do much
Alright have fun lmao
im a greek who hasnt has ouzo in a year, I went a little nuts
Nice job
For paint-stripping, use a degreaser like LA's Totally Awesome, or Simple Green
Let the minis soak in there for a good bit. Doesn't have to be ages.
And then take a soft toothbrush to it vigorously.
Let me door dash it
Finally after all this time my noise Marine is finished!
glamour punk rocker, nice
would be fun to paint a noise marine squad with different metal and rock styles for each mini
i really wanna see more noise marines with different instruments
like a drumset atop a rhino with sonic cannons on the sides
What tau sept should I paint my minis
the yellow one :)
Thanks cutie
ohh it just clicked what you said, that would be so awesome
Made this head for a Dark Apostle I'm working on
I know that color scheme 
You better not put that where I think you would put that
i may be a weirdo but i'm not a lunatic
and yea, that colour scheme is 100% what you think it is
The angle and distance makes him look like a necron with hair
Based off this guy
I don't know who that is, but I assume they are a Death Metal singer
A metal singer, but far from death metal lol. It's a running theme with my army; I kitbash some of them to look like musicians I like
Painted my first squad of marines, any tips or pointers for my work?
shade
Fair okie
Oh yeah definitely, these are just base layers for the time being with some minor detailing work. Thats one of my next steps, but I want to work on some Termagants to try other colors and paint different bodies
i need to practice edge highlighting
I’d hardly call Ghost Metal to begin with ngl, more like hard rock
@rare hornet
Ooo they look good!!
I got some heresy for y'all... ||skaven ultra marine||
Beholdeth, my duder
Can't wait for this guy to get run over by a Guardsman called Gregory
Icon bearer
ROXY
You should get a masked individual and paint them like Vessel
@rare hornet
Oooo yes
WIP
just a bluetac dryfit so I can get some idea of how it's coming together. Still all separate bits otherwise.
||"For the emperor-god of man-things! Yes-yes!"||
I feel like maybe use a normal terminator head unless you are going for a Normal human in terminator armor then this is perfect
Normal termi head is a little big atm, but I can make room for it. haven't decided on a head yet, so this is a placeholder for now.
It's gunna be a Black Templar so thinking of appropriate helmets
Here's with an old space marine helmet.
Ngl I like the other helm I was using because it's smaller and makes the armour around it look bigger, but it'd need some work to look space marine-y
that rocks, that loooks like the old saturn pattern terminators
tutel
I love these guys so fuckiN much
PAPA MY BELOVED
this brings a "look mom im a space marine!" energy that i love
Fitting for a dark Apostle, isn't he?
damn right
To me it looks impenetrable at the cost of movement, I’d love to see a modern redesign of this
Just wanted to say, for a first squad that is insanely good. Great job!
Only thing I’ll comment on as a non painter is do you plan to touch up the non helmeted marine’s head, he seems to be a little blue lol
Thank you so much. Its so much fun painting these guys. Though wish I could but I don’t have the paint for it right now
The face that is. I don’t have the right paints, nothing fleshy so to say
Oh makes sense, I really like the red on his mask though, it goes hard.
Just finished this captain today
I can't tell if that's the camera or if that's one shiny marine
Either way it's cool as hell
Had flash on which probably contributed to the shininess
Dk if ppl remember this but I finished them. After months and months lol
Well without the bases that is
I've been painting them for so long that i feel like i can do a lot better now. But at last the nightmare of painting 10 marines at once is over.
Adding some stuff onto their bases would be nice, edge highlights if you haven't already, lenses would be good to make the head stand out a little bit more
Chaos Marines be like:
You can see the dedication in your work, these are insanely good, and you think you can do even better? That’s incredible to me.
Sooo turns out I am in luck.
Friend of mine was able to find one box of old Cadians.
And it's a heavy weapons squad.
My forces grow.
HUGE, well done!!
anime knock off terminator assembled and ready to prime
What’s a good paint for ork skin
caliban green
Gutrippa flesh
back from a long and well deserved pause
i bring you, replacements for the stinky kataphron servitors
Big squishy lizards, now with a desire to banish the enemy of the omnissiah
pending greenstuff belts and wraps to secure armour
Incredible detail
Such clean work, surely wish I could paint like that. They look amazing.
im building space joan of arc now too 🙂
does anyone have tips on painting facial features this shallow? I've heard thin you paints but I'm really worried about ruining her face
i love nurgle marines
chromium oxide and benz yellow mixed
DM me I'll show you on video
just not tonight as I am very hungover
lmao
ok lol
Cute lil guy
magnus did nothing wrong 🙂
these look super good
Knight work getting closer
he only was really stupid
okay but to be fair
he had a literal chaos god directly meddling in his life from birth
and the emperor literally did not help AT ALL
magnus falling to chaos to me is less magnus getting outplayed and more the emperor getting outplayed
At least rubric marines look cool
yea they for sure do
i want to make some thousand sons chaos knights 🙂
with raven heads and painted in their 30k red and gold colors
I will do unspeakable things for this
cant you just buy it
Kinda broke rn
I want to start 1000 sons army but I also want to start a sisters of battle army
the pain
THE PAIN
i like ur taste thats exactly where im at lol
i have zero models kind of thinking of getting some
i dont have alot of sister of battle paints tho
i have one
unspeakable things
“im straight but terminator sorcerer lord is terminator sorcerer lord”
Yep
Hold onto the heads from your sorcerers when you get some, terminator sorcerer looks so good in thousand sons with an easy headswap
That's funny my irl friend who started playing super recently plays sisters and I play thousand sons
Paint him and put him into a jar
Kill team is a really good entry point if you wanna half-collect a few factions before committing to an army BC kill teams are full viable armies in their format so its not quite the same as randomly buying models from other armies BC they're cool
40k is like 10x the amount of models and you do your whole turn (move, shoot, attack etc) and then your opponent does their whole turn
Kill team is super small scale, I think the biggest kill team is the Nurgle Gellarpox one and that has like 16 minis total, and you take turns doing everything so it plays a little more like chess
Do battle sisters hade a kill team
Yeah they have two I think
Plus I think they have rules in a white dwarf that lets you run a few troops with Arco flaggelants
I ordered a squad
It should be here on the 11th
Some armies don't have their own proper kill team box set and you have a customisable pick of a few infantry units. I think thousand sons is the best example. You get to choose between Tzaangors, rubrics, sorcerers and SoTs, so you could bring a tonne of Tzaangor or like 4-5 SoTs
Aye poggers, which units?
Nice, I have a bunch of loose bits from that box somewhere
I never painted faces
I might get her next
Are they a pain
how much was this?
36 usd
i just think they are disgusting
oh that's not bad at all
But the shipping would bump it to around 46
still i can afford that
Feel free to swap it out, you can deadass just use a servoskull instead and just go "my sisters frown upon the use of Cherubs as they see it as a denial of the potential of humanity" or "My order is particularly involved with the Adeptus Mechanicus and gets access to servoskulls and other admech equipment to supplement their dwindling access to cherubs" hell, you like Necron scarabs? Tau drones? "My order has been given repurposed xenos tech to use instead of the cherubs they're used to and they are not happy about it"
You can justify any modifications to your army provided you've got some of homebrew lore for it and even then
My ksons has a chaos spawn that's a giant mutated Owlbear with lovebird colours that occurred from one of the members of the warband trying to keep it as a secret pet, I don't think owlbears are canon anywhere in 40k but that line of setup is all it's taken for people to accept it as something that makes sense
not that i intend to play in a tournament or something
but there is a part of me thats like
certain communities frown on proxies that are too far from the original model or whatever
arent there some places that have like a 90% GW plastic rule or smth?
not that I care if I get a 3D printer im pirating everything 🙂
Nah this is something pushed exclusively by GW themselves
I've never once met anyone who had a problem with mods or proxies
Official tournaments do but there's essentially no way to tell once you've got paint on a good quality proxy
why dont sisters use survo skulls
Also no one plays GW tournaments anyway there's like 3 big american ones but other than that even most larger tournaments really don't give a shit about you using 100% GW plastic provided you've put some effort into your minis, they're your models at the end of the day and you shouldn't have to compromise having them the way you want for the sake of some unbearable friendless neckbeard you'll encounter a handful of times across your time playing
They technically do they just tend to be more of an admech thing bc they're about as close to an advanced computer as you could make and they don't like just handing them out, sisters tend to opt towards cherubs because its kinda "their" weird religious thing
what weirdos
Sisters are unironically the most evil faction when you really break it down
If you've seen pariah nexus: the attitude of the sister in that is absolutely perfect, they're legit brainwashed and lash out at anything they percieve as weak or unfaithful
Dark Aeldar at least have the tragedy aspect of the fact they're kinda forced to be monsters, the sisters do this to themselves essentially
Like sisters could and should know better but actively choose suffering and ignorance and choose to inflict it on everyone else because they truly believe its the right thing to do, Drukhari are kinda aware that they're shitters on some level and would opt to escape it if given the opportunity
is that why they use stuff like the Penitent Engines and the arco flagellant
Yeah both are people who "haven't shown enough faith" and they're essentially sent, unarmoured to the frontlines to die for a chance at redemption in the eyes of the emperor, the idea is that if you believe in Big E hard enough: he will personally keep you safe.
Weirdly enough, sometimes they survive completely unscathed, (so the emperor does actually perform miracles for them if they believe hard enough)
If you've heard anything about how Mother Teresa was actually a horrible war criminal and not a lovely saint: that's a pretty core idea the whole of the Sisters are formed on. Just blind religious brainwashing used as a tool to control and abuse the people around and under them
They are a cool faction, like its fine to be a sisters fan, lol, but they're probably the most morally evil faction of the lot when you start digging into the lore
what about the saints
Basically daemon princes
Like Saint Celestine is essentially a daemon prince of The Emperor
this could be looted i feel
i like a cleaner aesthetic for my sister's of battle
more crusader and super soldier
less bds m and torture
i don't like those and the penitent engine and stuff
i do like their cool as hell helmets with the red eyes and all using bolters and flamers
i might paint them like this
nice aesthetic
i like the white and red
Its not that hard, mini painters just make it sound harder than it actually is and then over complicate it
simply put, learn how to mix skin tones the correct way and not their way, you'll be better off as you can modify it for shading
and get more accurate texture
alright
My main issue is not having a good brush for faces
Eyes and mouths are terrible
dont need a good brush
just need a toothpick
control is more important than a good brush
use your fingers
havnt had the motivation to paint my minis for a couple of months now sadly :(
same
but i am getting a special mini start of november to paint
my paints are fine over this time right?
probably
they have been in a pretty much sealed box for months
they tend to last years if you have a proper seal
if not i have spares that i havnt even opened yet of my main colors
Gotta love the ole Dawn of War Soulstorm start for the sisters. Announcing that those of the faithful looking to aid them in retaking the system arrive in the square at like 09:50 hours, and that the heretic burning will occur in the square at 10:00. Teehee, they are just going to cook everyone that shows up.
As much as I dread askin.
Anyone got an idea for a good lightning setup or lamp I can get for painting? Current lighting in my apartment is absolute ass.
Almost done with him
Omg I actually love that so much, ghost is my favorite band and you’ve done this so well 😭
Thanks. : )
It's kinda a theme with my EC warband...I also have Ozzy (as a terminator lord, their warlord, based off the Black Rain album cover), Bowie (as an exalted champion, based off Alladin Sane with a bit of Blackstar mixed in), the lead singer of Muse (biker champion designed after his appearance on "thought contagion") , and two members of Rammstein. (Till and Oliver...both terminators. Till has the heavy flamer.)
I suppose rapists are very much in character for EC...
A) I painted it literal years before that news broke
B) Didn't those charges get dropped anyway?
B) Yeah, there was no conviction. However, if you read all accounts around the story, it's clear what happened in my opinion.
Whatever; I'm not here to cause controversy, but rather to brag about my unique army theme. DM someone or post on reddit if you'd like to talk about that; I do not feel this is the place.
They look amazing!
@rare hornet

I am not gonna glue the centre carapace on, just gonna let it sit there so it can be removed to see the interior
Not gonna bother magnetising it
Then all that’s left is weathering because I am NOT good at it
😭
Weathering isn't too bad
Idk how to do it properly especially for knight armour
Not too sure, i don't plkan for proper weathering until I do chaos knights
Dry sponge for scratches maybe?
tried that but it just looks like a bad paint job lol
its time
spooky
My squad is coming along nicely
Imo the lamp setup is just whatever suits nice and has a decent adjustable arm to move it around a bit. The most important part is the globe you choose. I just popped into my local hardware store, found the brightest lumen daylight bulb I could find (white instead of yellow light so you see your colours more true to how they will appear in natural light).
Thank you 
Forgot to say
I am so goddamn lucky.
Friend of mine in the USA found this.
And its on its way to europe for me c:
And its the old guard.
Nice! I'm not too knowledgeable about Guard, how does that one differ from the more recent Cadian squads they released around 9th?
Just the models
I just hate the look of the new ones.
I grew up with the old models and played the guard in Winter Assault (Dawn of War) with the old look.
So that will always be the cadians for me.
Right one is the old models.
The new models are even harder to paint cause their heads are even smaller.
And guard atleast from what im told is hard to paint already lol
I think they both look great, but can see why they decided to update a touch, they do have a hint of the chonkiness that other older GW models had
Eradicators done
Hey do anyone have kitbash a imperial knight's head?
I feel like it look kinda weird
laughs in krieg
Realises you have to pay like 40 bucks more and have to paint much more accessories made out of weak resin
panicking gasmask noises
An upgrade for your IG squad.
really any desk lamp will work, i have an LED bar lamp I like personally though
lol
Yeah I dont like Krieg.
I want some Vresh Grenadiers or Tallarn's
I am super proud of the screen on the knight
Bravo, really impressive work! And it's such a dynamic pose.
Ye
Painting practice on some spare dudes
I did fade into black 1st time ever AAAAAAA i love how it looks hdysffsfsfgdh
What chapter is that
Looks like Grimaldus, Black Templar's Chaplain
???? I think i figured out stuff about paint???
Nice little highlight blend! What'd you figure out?
how to do gradients with paint
i have no idea how it all works
my brain refuses to learn anything via tutorials and im simply learning by trial and error myself
and somehow it looks good for a first try
im happy
Ahh, right on. What was your technique for this one?
Use a brush and put paint on it and rub the brush on what you want to paint
I did a small drop of paint, cleaned brush and made strokes coming from the drop
Idk how to explain correctly, english hard at times 
Okay, right on. That sounds like feathering then, where your clean brush waters down the paint as you guide it along
I have no idea about painting, nearly failed artschool because of that, colors are the bane of my existence
But im happy i figured this thing out at least
You got kicked out of art school?
Nah, finished it but barely
Ok good
@rare hornet
He's looking really good
most tutorials are really bad anyways, legit 99% of the hobby guides I've seen are garbage
sounds like bad teachers, most dont modify their pracitices for the students, I do because I actually understand color theory down to the physics of light.... I hate myself very much if you want to know
when i do gradients i usually do it with two contrast paints, gradually blend them into eachother while still wet, easy to get a hang of after a while
Artschool almost killed my will to draw at all tbh because of how strict they were with everything
yeah fuck that, the mistakes are the art
if there isnt flaws, then its a photo
and devoid of personality
I simply figure out everything by myself over time, never learned shit from aby tutorial ever in case of art
artistic photographs specifically put flaws into them too
a good tutorial wont teach you how to, it will give you the concepts to learn how to do it on your own as everyones methods are different
there is no one best method
annoys the shit out of me when people say there are, but thats my degree in art history screaming at them
Best is just look at how someone is doing something, pick and mix the methods to make own
exactly
I love the trans flag heraldry
her sister knight has a lesbian flag shoulder too, as well as the trans heraldry
by the empra that is great
but I wanna put the Sleep Token heraldry on the lancer
Need to redo the cape a little as it came out a little patchy with the wash
I hope it's not too bad that the redo is a pain to do
Nah just a coat or two of white then apply the wash again
Thats good ^^
The cape can be a tad fiddly as it’s a large area to wash
Done
I like him
VALIDATE ME and my work in progress model
That’s a really nice metallic ourple
yesss
it was a metallic zenithal, then five layers of leviathan purple+legion black at 50/50, mixed with lahmian medium to thin it out.
Terminator squad Gunnar done... finally...
looks nice so far.. good job
the dirty look on the white shoulder pats are intentionally i assume
on purpose*
black templar?
Yup
nicely done
Thanks again ^^
too bad that i already have an expensive hobby in mtg already otherwhise i would get myself an 40k army again
Next up: Dreadnought, Ballistus Dreadnought, Assault Terminators, Chaplain in Terminator armor, Infernus Squad (5 minis) and Sterguard as also a Gladiator Lancer XD
My other hobby is medieval reenactment + medieval fencing.. so i have 2 expensive hobbies but it's okay 😄
I like the even, clean brush work. Yellow is really hard to do proper and you should be proud!
I also do historic fencing but also the union just got a good contract so I do not give a single shit about money rn
Thanks a lot! My trick is: Apply 2-3 thin layers of white scar on parts i want to have yellow. After it is dry i use Imperial Fist contrast (also 2-3 thin layers) to get the yellow look ^^
Oh that definitely will work. Contrasts are a miracle of modern alchemy. What a world we live in!
they arent a miracle at all, they are just normal paint without the chalk added in as an opacifier. Professional paints have been doing this for thousands of years of not adding an opacfier
if anything they'd tried to get things more transparent
What’s the best way to paint gold figures
Tweezers and a lot of gold leaf
silver metal ink with a drop of yellow/orange paint
Yo, what this dude be
He'd look sick having a showdown with Gene Steele, the Three-Gun Bandit
You can always dunk them in LA totally awesome and try again
Neurotyrant is done
You get a really good gold from a high end brand or get rub and buff.
And then you just paint it on
For shading you then put a burnt umber pin wash
took a good closeup shot of him in natural light
He is a proxy remake of an inquisitor made by red pilgrim minis, based off of the old inquisitor Gideon lore model
I've prbably missed the discussion but what does everyone think of this? When i first saw it i was like this is sick. But the more i look at it the more silly it looks. For some reason at first glance i thought it was like a half life 2 strider thing with a human torso but no. Its just a fella with stilts and gun. I always imagine mechanicus as being unrecognisable from humans but i find it strange that so many of their minis are basically just people shaped.
Also why is the exhaust pipe so far down? Is there a reason for that?
lower heat signature?
Horny designers
Long ass legs
its his melee weapon
or its like actual monkey tails and to keep balance
I cast melta
It thinks cool because of how dumb it looks
Dood will deatomise you and your Friend and be magnificent in his gogogadget legs
Melee him with power fist
💀
Casual Eldar being in a melee with Space Marines
I NEED 
He's mid teleportation I love it
But the smoke and heat will rise anyways no? I might just be an idiot.
I guess it could dissipate before reaching him.
idk, i think it looks dumb tho
Figure 1. Example of why sub-assemblies are sometimes desired
Kitbash him to be fully physical with 0 magic shit
Overlord with teleport device
Seems generic, like the wayleaper autarch
It is
Rules say he lets his unit move an additionlal 6" horizontially ignoring models. So may not have to measure vertical distance when moving, better than jump troops.
I’m thinking of getting started and want to do IG, either Harakoni Warhawks or a loyalist Moebian. I can’t find anything on a colour scheme for Moebian. Does anyone have any references or suggestions?
I don’t have a reference, but my suggestion would be to go with the black and red from the Veteran Sharpshooter’s options from Darktide
Red fatigues, Black armor
thats honestly kind of annoying they did this because now you're forced to buy the new model
i hate wyswyg
I HATE you
Just finished up my GSC Primus
Not when i'm forced to buy it because the rules say my army is now invalid
I already have too many armies and spent way too much time on them
Unless you play in tournaments I haven't seen any issues in GW stores/local game stores about proxying
Anecdotal of course but
I'm banned from two GW stores for having 3d printed bits, and my local follows tournament rules for their events due to how fucked GW can get with supply turns out
its not like this everywhere, just where I am
What a shame, sorry to hear. Heard all too much about shitty gw stores
Thankfully the one near me has humans in it not drones
Definitely lmao
the local store that banned me also said it was safe to strip plastic models in acetone
so... their opinions are bad
There's one GW store I'm iffy going to with even just greenstuff on my models
yeah... some gw stores can be weird about it
🫂
I don’t have a gw store within 6 hours of me
I personally like doing it, but I also like to give reason why a certain model has said weapon. So for example the vindicator has a flamer because he’s all about getting up close
My problem is when I have to get a new model for an army that already have 10 overlords because I have to have them for different load outs
I just live with it and suffer
rule of cool
oh i do agree with you there though it is annoying
i'd also not made of money
yeah each character is like £18-26
Will have to check 'em out, methinks
Also the general consensus I think is 'it looks dumb'
I, however, don't care and want two of them because I have an unhealthy amount of Snipers
@rare hornet fixed up my chaplain by giving him a phat sword - the paragon warsuit’s sword
ooooh yes he's looking HOT
Crispy hot
Finished up my Venomcrawler duo, this is Burt
Not fussed on the fleur’s being there
And his twin, Roger
The fleur just makes it better in my eyes
also you could add some funny "lore" to it
Female terminator chaplain, ezpz
like that a superior gifted this sword towards the chappie cuz he saved a bunch of sisters
The gladiator lancer i got, will get some kind of a Dark angels emblem embedded on the armor cuz' my best buddy gifted the tank towards me and he plays Dark Angels ^^
Sooooooon :3
Beakie!
I love the beak helmets, just feels right on a crimson fist
The other overlords you have aren't invalid though? You only need the new model if you want to run an Overlord with the translocation shroud rule.
Bathe in isopropyl alcohol for like 15-20 mins, brush off the stuff with a toothbrush is my goto
LA's totally awesome, dont use isopropyl alcohol like most tutorials suggest, this will in fact degrade GW polystyrene greatly
also IPA barely works
Oh really? well time to find a substitute
LA's totally awesome, most kitchen degreasers will work as a whole
I have multiple times, I had one time where the GW paint on it was too thick and it required a 18 month IPA bath
been doing a 5 year test on what chemical is bestt at stripping paint on minis
in lab settings so its more controlled
Christ, how thick were those coats?
3 coats unthinned
if you thin it, you can actually just take the paint off with vinegar sometimes because the binder has been destroyed
they dont use the correct chemical make ups for paint to be thinned to ink like consistancies
mix that with the improper set up of a wet pallet you guys do, you get augmented pH levels which makes the binder degrade more
and the paints get gloopy and weird at times
yes, I get a bit into the chemistry of paints
as its incredibly complicated
I fucking love Op Shopping man
Paid like $5usd for a sewing case that's unironically the single best mini case I could ever ask for
Now I just need another box to carry my Lord of Change and Magnus and my army is easily transportable
It even has the little tray for magnetic loadouts and pouches for dice
The problem is now I have to spend a bunch of time kit bashing it so I can have all of the weapon options I need. I am very much of the opinion they should be putting all of the options into a kit if they plan on having a bunch of different loadouts and requiring you to actually have the item.
@plush swift @pearl shadow @pallid onyx
I do get the frustration of not wanting to have to have a bunch of seperate models for different loadouts, but at the same time I very much get the frustration of "This overlord has a resurrection orb and staff of light, this one has a tachyon arrow and voidsythe. Oh and by the way these 10 warriors have gauss flayers but these 10 have gauss reapers". The game has enough to keep track of without also having to keep track of what everyone's models represent.
But I'm also a T'au main and get the benefit of magnetising being relatively easy for my army, so I understand it's a bigger problem for other armies that can't do that so simply
Its also the time investment, the money, the space(while yes not a lot, its still a concern), its one thing if its a brand new unit, its another if its a version of something we didnt need, which also means this one is also gear locked, so if the weapon it currently has is bad, that means the unit is pointless to get too
basically I'm more annoyed at the rule than the model
I 100% agree that the last thing Necrons really needed was another HQ haha
We need a bunch of units done in plastic
and not have dog water designs like void dragon
I actually think the void dragon is the coolest looking C'tan, but never had to assemble or paint one so I suspect that could change my opinion
looks cool? yes. Completely terrible structural design to where if it breaks, you need to buy a new one because no fixing will retain its original height? also yes
its a heavy figure held up by a few thin plastic sticks
its really poorly structurally designed
Yeah that makes sense looking at it
if they were using something like ABS or a higher end PS then it would make sense
but the PS they use is actually second to bottom grade iirc
I'll be having fun putting brass rods in all my Ta'unar joints soon to stop that from breaking apart under its 2kg weight of resin haha
I go steel with music wire reinforcement for titans
Slow progress, arms up next.
My basically finished commissar costume.
I'm gonna have to get a different hat but
Otherwise I'm satisfied with it.
And yes I have boots to go with it. Not normal tennis shoes
i kinda like the hat lol
Well I think I’ve goofed up: I assembled the fuselage so I’m unsure if I’ll be able to adequately paint the Valkyrie interior or not (left the top off but might still struggle). Should I still be able to get it done? Or am I better off at this point gluing the top on and ignoring the interior?
If youre not putting door gunners in its basically worth glueing the doors
That said, I rigged a small piece of wire to hold the rear door shut, which i can swing out of the way to open it
Or can just close them with small blob of PVA or blutack so its not permanent
Rigged a wire eh? How does that work?
Drilled a small hole through the rear hull, looped a bent paperclip in so it rests holding the hatch shut but swings up out of the way, Id dig out the model for a pic but its about 12 boxes deep
Gotcha
Dress in your finery, and get your coach booked – you've been invited to the Halloween Ball.
#WarhammerCommunity
Any recommendations how much to thin the regular GW Paints?
And how many coats I should apply to my guardsmen cause currently they have one singular coat.
Also can anyone point me to the correct painting handle for guardsman units and the other smaller models like heavy weapons teams and sentinels?
Have a piece of paper
And practice strokes on those until satisfied
Then apply to model
I have a well mantained wet pallete and can apply straight from my pallete
Huh alright Thanks.
Yeah for me its kinda basic rn.
@copper siren posted these a few days back but this is just with one coat of paint.
https://cdn.discordapp.com/attachments/1103395733861838879/1167259676187050124/IMG_20231027_022548.png?ex=654d7a49&is=653b0549&hm=1c8a828d7ea5589170b140eac29d362d1790eb761585d41bdd78b1a80f22ce71&
I need to touch up on them where I overpainted.
- start with 1 water to 2 paint
- depends on the color but anywhere from 2 to 40 (keep in mind that the company that makes GW paints recommends 24 hours before adding another layer)
- block of wood and some blu-tac
are you adding wetting agent and ammonia to your wet pallet while using distilled water?
what now?
Yeah thats what you have to do with them
i dont know that
Most dont
ive been painting minis for a little under a year
works just fine
gets them on the tabletop
Yeah I didnt know about the wetting agent thing until a few days ago, new research paper dropped
turns out wet pallets cause a ton of damage to acrylics
but yeah for a well maintained wet pallet, add both
not much
the ammonia helps regulate the pH balance of paints and also acts as a biocide to prevent mold
@sturdy sphinx look see the 8th edition veterans

hell yeahhhh
STEEL LEGIOOOOON
ohhhhh I am pointing at the weapons (recognising them from the imperial navy breachers kill team and arbites box)
I hate the fact that most minis only have left melee arms and right gun arms for characters who can have 2 weapons
yeah it sucks
I want my Astra militarum sergeant to be a gunslinger with two bolt pistols, or my comissar a maniac with two chain swords
Do you want them to be tournament legal?
Because you could always scour etsy/printing
I only paint, I don't play
hmm
what key words should I use in the search bar
"miniature arms"?
I found some space marines one, but no astra militarum
rip
Guardsman
imperial guard arms
As in, to the foam, or on top of the working surface?
to the water
so yeah the foam
the foam is a void for the chemicals
and you're just filling the void
How much wetting agent? Drop or two?
a few drops yeah
and like a spoon full of house hold ammonia
which is pretty watered down compared to lab ammonia
I'm making the rustalkers and looking at the manual. I've just realized that sicarian rustalkers with the guns have mags. They have one functional hand that holds the gun. How do they reload lol? I guess they have a usable thumb on the other hand but i cant imagine its very effective.
They reload through the power of the Omnissiah...and the Servitor running after them with spare mags
I have never looked at this gun closely before, but is that an extended pistol magazine and a drum magazine on the same gun?
My guy is strapped
On the topic of reloading though, I think that's an issue with quite a few models, they often don't have spare ammo, or maybe only 1 or 2 spare mags at most.
It's not very "power fantasy" apparently to have models with PUBG backpacks full of ammo.
I do also find it odd that only the melee Ruststalkers are meant to get the pouch accessories for snack storage, gives the Infiltrators nowhere to even keep extra mags
Yeah, i thought that was strange as well. Originally I thought that extra mags in the sprue were to go on their hips but no. They are meant for some other gun option which is strange.
Wip on twin lascannon for hellfire dread
They are not ¯_(ツ)_/¯
Would it be out of place to have purity seals on a servitor kitbash?
Yup they combined FW and GW stores
Did the FW prices change at all?
But old interface was "better"
Why should they?
True
Thunderhawk is still 710€
Buy good plastic for 55 or shitty resin for 90
“Ooh of course they’ll take that brittle bullshit”
-GW executives
My pile of shame is currently big enough... so no money for GW minis in next time...
The only things that were tempting me to expand my pile was the new Cities of Sigmar models, but then I saw the prices....
£32 for a single monopose cannon when it's the same size as the Imperial Guard cannons which have two in a box with three build options for each also £32
£90 for Tahlia Vedra when she's a smaller centrepiece model than the Norn Emissary which is £70
That detail is tight man
I've just got too much minis to do...
Leviathan Box:
1x Apothecarius Biologis
1x Terminator Captain
1x Lieutenant in Phobos armor
5x Infernus Marines
5x Sternguard Veterans
1x Ballistus Dreadnought
Other Marine minis:
1x Gladiator Lancer
1x Chaplain in Terminator armor
5x Assault Terminators
3x Cernobite Servitors
And then there is my second army with Votann still left to do XD
Thanks a lot! Trying to improve my freehand skills with artist pen 😄
Finished up a Typhus.
Him on top of a allergy pill bottle just seems so funny lol, looks great dog
Thanks! And I hadn't thought of that lol
“Juergen what are you doing in my dress uniform?! No don’t give it back, burn it when you’re done.”
To the fellas who helped me out with my tech marine questions last week. Here’s the finished goon
I could probably make sturdier models pouring resin into moulds than forgeworld lmao
💀
Does this mean I can't drink my wet pallette once finished any more?
Drink it
you never could
https://www.etsy.com/listing/1401373334/poenitentiam-battle-sisters-squad
I just found these REALL cool proxies for repentia on etsy. you think id get yelled at for going to a GW store with them?
depends on the GW store, some will be WAY more anal than others but generally speaking the GW stores have to abide by GW's own policies which I believe is no more 3d printed bits period
so full models will... not exactly be kosher but its one of those things of maybe the store doesnt care

why
Non-toxic doesnt mean non-poisonous
so
if you drink drink it with something else it should be fine
just throw it up after ur done 
true
or micro dose
Microdose the mercury pigments
yep
I got back from the craziest Halloween party
was it the masquerade in NYC?
because nothing beats that, but its an invite only thing within the goth community
I live on the west coast
We just had a giant bond fire
And the fire department was called
hell yeah
GW store maybe, regular LGS would be fine
First time painting, don’t think I did to bad
Ah, I see the same warp-corrosion that afflicted my Onager Dunecrawler's Melta has also afflicted your Plasma Gun
I honestly forget what the effect I was going for was here
I think it was supposed to be a white-hot glow but instead I accidentally made Warp-Fire Melta Chamber
Planning on painting a space marine Intercessor killteam, and I have the chapter/successor options down to the following:
Crimson Fists
Salamanders
Lamenters
Not one really stands above the other from a lore standpoint from my POV (okay I’m slightly biased towards Lamenters). Which one should I go for?
I should get more Skitarii
painting yellow and taxi cab checkers, uhhhh
It is a pain I am willing to undertake if need be
It has arrived!
So excited to start tackling this
Also just did a full check/inventory of all my Ta'unar bits. No damage, everything accounted for, and only 1 part slightly warped which should be extremely easy to bend back to shape (railgun half)
Which seems great from all I've heard of Forgeworld lack of quality
eats resin
first ever minis painted, just need to do the transfers and cleanup. definitely some obvious room for improvement but i like how they turned out 
My man painted a frickin titan as a first mini
I don't know if I should be impressed by the boldness or smt else
that aside, looks good for a first miniature
I would recommend training on smaller and cheaper models tho
for you first forays into painting
that's an impressively smooth painting for a first timer
Damn looks better than mine.
Also Salamanders my beloved 
What hurts me the most currently.
Old Cadians cant be bought anymore.
So any model I ruin is eternally in the void
why not just buy toy soldiers for kids and ruin them for training?
nah son, the main coat and the metal trim look great, just thin whatever paint you used for the gun next time and youll be solid 
maybe use modeling paste or glue sand to the base too, looks more cohesive and natural than rocks on flat base
have to do my bases later on
main focus is getting them battle ready.
to play killteam rn
Alright. Will do.
That being said the metal/silver metallic paint was a bit too thick for my liking even after thinning.
Might have to thin it twice.
Some small overhauls to my kataphron standins.
Now with gravity maul
creature of habit
My current work in progress on "Signar the Grim"
I need me some ogryns
Did you shave the indomitus crux off their arms?
nah theyre regular assault intercessors from the box, so they dont have any special insignia printed on their pauldrons
theyll have the stuff on transfer sheets
GW just updated their website and im pretty sure they got rid of the 3D view for the models. This sucks
I assumed it just wasn't fully functional yet, every page I'd visited so far had a bunch of big black and white servo-skull images that I figured were placeholder
I didnt even clock onto that. Pretty sure youre right
my summoner guy wip
I meant the indomitus symbol that usually goes right here
I love the gold color!
What color did you use for the gold
retributor armor
thank you my entire army is are golden girls :)
Darktide
Adepta Sororitas
Strike Force (2000 points)
Canoness (65 points)
• 1x Rod of Office
• Enhancement: Blade of Saint Ellynor
Imagifier (45 points)
• Enhancement: Saintly Example
Imagifier (35 points)
Imagifier (35 points)
Palatine (70 points)
• Warlord
• Enhancement: Mantle of Ophelia
Saint Celestine (135 points)
• 1x Celestine
• 2x Geminae Superia
Battle Sisters Squad (100 points)
• 1x Sister Superior
• 1x Inferno pistol
1x Power weapon
• 9x Battle Sister
• 1x Multi-melta
1x Simulacrum Imperialis
Battle Sisters Squad (100 points)
• 1x Sister Superior
• 1x Inferno pistol
1x Power weapon
• 9x Battle Sister
• 1x Multi-melta
1x Simulacrum Imperialis
Battle Sisters Squad (100 points)
• 1x Sister Superior
• 1x Ministorum hand flamer
1x Power weapon
• 9x Battle Sister
• 1x Ministorum flamer
1x Ministorum heavy flamer
1x Simulacrum Imperialis
Immolator (115 points)
Sororitas Rhino (75 points)
Sororitas Rhino (75 points)
Repentia Squad (130 points)
• 1x Repentia Superior
• 9x Sister Repentia
Repentia Squad (130 points)
• 1x Repentia Superior
• 9x Sister Repentia
Zephyrim Squad (70 points)
• 1x Zephyrim Superior
• 1x Sacred Banner
• 4x Zephyrim
Canis Rex (460 points)
Inquisitor Greyfax (65 points)
Inquisitorial Henchmen (160 points)
• 10x Inquisitorial Acolyte
1x Eviscerator
1x Plasma pistol
• 2x Gun Servitor
• 2x Mystic
• 1x Jokaero Weaponsmith
• 1x Daemonhost
Vindicare Assassin (80 points)
Rate my goofy list :3
I wanna make the acolytes all darktide characters :3
i dont even have 1k points yet :(
i am getting greyfax 100% though
and if i can celestine
i have 0 points haha this is kind of what i want to work towards
and then i am gluing greyfax to celestine
XD
I only have like 108 points on my hands
saving that
still need to assamble other 4 chaos space marines
Where are your Castigator Tanks?! They are literally awesome for SoB and they are definatly not overpriced
And need get at least Exalted Champion
all vehicles are overpriced :(
atleast they dont cost many points
Nope... Just Nope
CRUSADERS OUR BELOVED
Crusaders are good for obtaining fate points
tanks? TANKS?
Knight Errant equipped with Thermal Lance and can deep strike
THAT`S WHAT YOU NEED
This is overpriced.... 140 pts for a castigator with a battle cannon is sweet af
sister themed titan
yea but think how pretty i can make it with SoB color scheme
exactly, I want to put fluer de lys all over it
Vindicator with Demolisher cannon costs same as Defiler
Also fun fact
Very pretty?! Castigators are detailed and neat af
Defilers are trash 😢
and yes i cut the cyber baby off the standard
yea they are awesome but I want the knight to run at the biggest thing and duel it
while my SoB hold the line
I think she needs a better icon
god i gotta say the design of the cannon is still so good
The cannon is sweet with 48" and Strength 10
solid for SoB
and don't forget... ANY SoB vehicle is a driving demolition charge
I love Greyfax too
||She makes for an excellent Skitarii conversion base >:3||
@silver thorn get some castigators... for real.. They are good
Which one is this?
The points are fitting for 3 Castigators...
Ye the Knight is a mighty.. but the castigators can be used more strategically and as i said ANY SoB vehicle is a driving demolition charge
yea i know its not very good. knights are really over priced. at least the canis rex specifically is designed not to need any of its army rules.
i just really want to field a knight :3
also 3x castigator $270
1x canus rex $150
Also Castigators can Battle Shock enemy units after hitting those units
even less if you source it nefariously
And the Battle Shock is something that is worth doing it
I thought about armiger warglaives but I think they are even less point efficient than canis rex
like they do no damage to anything but chaff and clearing chaff is something SoB seems good at already
so your otions for anti high T seem castigators or you could take the worst option and take some knights units geared for anti high T. the most point efficient of which is canis rex I think (but its abigger investment)
yea, but the free stratagem is cool and it takes a lot of heat
I would field a Knight only in 2k+ games...
1k games it's nearly half of the Army...
And also don't forget that SoB live for their miracle dices...
Knight is not a SoB char... so when Knight dies no miracle dices
Problem with knight is that he looses his army rules and stratagems
Yep this as addition
Imperial Knights can suffer drastically from this
Because their army rules are strong
used to be
Also it's titanic... so no fire overwatch
Chaos Knights suffer less because their main rules and stratagems are for battle shocks
canis rex gets no army rules, thats the whole point of him.
In Imperial Knights army he gets them
yea but he doesnt use the uhhh whats it called
his points arent wrapped up in buffing armigers or w/e
i think if you want to be competitive with SoB you just take like 5 battle sisters squads and 3 arco flaggelents and thats it
you just take 2000 points of SoB and characters cause their leaders are really strong
No vehicles or paragons is not the best idea
i think of casual play with strategic points etc. you need folks with OC to gain points etc. and this knight is 460pts... you can get much more stuff with that points... If you want a "troll" list okay just field it but then there is the possibility of loosing the game cuz folks for getting victory points via strategic points are missing.
Ok , I asked from my friend who plays Imperial Knights and knows SoB index pretty good , he said that their is sense to maintain a Knight in SoB army
For a 2k+ battle it could work yes... cuz on 2k you have at least 1.5k pts left for some SoB stuff... on 1k i would say it's risky
Bringing out anything that costs more than 300 pts for 1k is risky
Yup agreed
its for 2k so 25% of the army doesnt generate miracle dice
Thing i learned for 10th Ed is also that it is much about factional synergies...
Auras?
Just as is said... look at points, synergies and abilities as also OC stats.... All this matters even for casual play... and if you want to make a "troll" list just do it...
I have myself my own Black Templars 1k "Troll" list with a Land Raider Crusader in it... fun to field cuz only vehicles are set up at start but until now i had only draws with this list
No Abilites and also Char abilities when Chars lead units etc.
this is very strong
Well all CSM can go with is 3 Chaos Lords
I mean, army abilities aside there is a knight to fill any gap really, crusader/canis if you look after them.. I ran warglaives in my admech list, good in melee and with M12 great for stopping big guns never tire etc
Those guys just dupe stratagems for your for free
Ye i see it with Castellans/Marshals for my Black Templars
just dope
Great with undivided full re-roll stratagem
You can just dump squad of 20 Primaris crusaders with chain swords
Guys will just drop 95 attacks
I could XD
But i can additionally add a Castellan to get Lethal Hits to my weapons in those squads
muahahaha
Judicar

Or i use 10 Primaris Crusaders and Land Raider Crusader / Repulsor plus Castellan/Judicar and have some nice synergy 😄
Scouts 6" on vehicle then and a vehicle directly near my infantry...
And then Firestorm Assault Force detatchment for getting assault and heavy ability on any weapon of my army XD
advance and shoot... advance, disembark, shoot, melee ...
Something like this can then be fun xD
land raiders 🙂
Ye and with that Detatchment i selected any weapon of the deployment gets "heavy" & "assault" keywords... and if weapon has already "heavy" keyword then it's +1 on hit roll
so i have complete mechanized infantry that can advance fast and shoot also XD
Why that?
They cool
Current wip on old assault termie shield...
Wait
Something between Summer and Winter 2024
i would say
oh lawd they comin :3
I just realized something
We can use freeguild steelhelm bits to make feudal imperial guard regiments/knight House militia
literally how i feel now ive got all the bikes done...
just a wraithknight and troupe to go
can wait for my siters of battle squad to get here
Y'all I'm gonna start collecting AoS
Do I go Gitz or Seraphon?
Leaning slightly more towards seraphon atm
What you like you play
it`s basic
Seraphons are about magic and strong units like big dinosaurs (i think)
Gitz about placing yourself proper way on the map so you would be under the moon, and also TROLLS
I play thousand sons and I think Seraphon is the most equivalent type of army
I love magic and casters mostly and tend to play more Elite style armies but idm having a big blob of melee/obsec to play around with (tzaangors and cultists)
Yeah I love the mushroom/stoner aesthetic of gitz and I really like the dankhold and the huge troggoth that came out recently but I'm not too keen on the whole wolf rider thing and that seems to be a big chunk of the faction
Kinda considered lumineth bc their models are cool but I don't really wanna play the stereotype high elves if I can help it
Than go with Disciples ot Tzeentch
Read through their codex
Battletome*
Maybe you will like them
also Daemons could be used in 40k
so like you could have daemons like pink horrors for 2 armies at one time
Yeah I was heavily considering playing Daemons tbh I do have a lord of change and a few horrors/tzaangors already
Kinda wanted to start a fresh army for AoS but honestly I probably am better off leaning into daemons to get double value

nice bases for sororitas, my first bases i did with shale rocks and glue
i assume you have to prime them and paint them, then you glue the model on
more fleur de lys is always better :>
Just scored a NIB fw venerable dread for Raven guard. Screaming rn. Had to share my excitement lol
Hell yeah
It's dated 2010 on the slip.
55$ usd
That’s a steal.
Getting weapons is gonna be so hard
Thats a kasrkin right
That is a Cadian shock troop I’m proxying for Death Korps of Krieg on tabletop
Minis
I bought more funky wunky little guys for my little guy army
Some cool lil guys
How funky
I also bought a buggé
ohhhhh thats the reason why it gave off so much krieg vibe
I was like, hey if kasrkins looked like that maybe I can use them as krieg grenadiers
You absolutely could
🤤🤤🤤
I just order those plates
Nice
It was her or the void dragon
And I went for the bug
Paints for the paints god
Youngest eldar model
Uhh kinda of weird question, but what would y’all recommend me for a beginner mini painter? Just out of curiosity?
This army is a nightmare
Stayed up all night and only have two SoT's to show for it
And they're not even done
Are you just going for something fun to pain or something to actually play the table top game with?
Hey, I'm trying to get into 40k tabletop, anyone mind looking over my army list?
2000 point Imp Knights
Something fun to paint, I really have no intention on playing
I just want to brag that I’m a good mini painter one day 
Gorgeous Autarchs
Ah yes, the Great Clean One
i hate it
Is it more or less disgusting than the split belly rotted flesh Unclean one?
the what?
In that case just go with whatever you think looks coolest
But the really easy ones are necrons because they're 90% silver
More so
For some generally cool ones though either knights (if you crave debt), space marines or tyranids as not only are they all cool but there is a lot of room for custom paint schemes
Knights (if you crave debt)
3D printer go BRRRR
Yes but I'm trying to not get the mam of culture assassinated by GW
meet my grey bois
And still gonna be dishing out cause custom bits
I really want to get this Shield effect on my Lancer
think it's like 10 euros for the shield, lance, and exhaust FX STLs
I'm not saying to pay a Chinese guy to print your knights for you
i am saying its a lot cheaper
if you just put a hood over the printer you don't need ventilation, you just need to mask up when getting into it
or, just accept cancer will come and do as the Omissiah demands
that sounds a bit much haha
when I say a hood, a cardboard box works
knight preceptor kit only 70 bucks from china 😳
Currwnt wip on old assault termie sergeant..
bonk boi
little chonker
I feel like his shield is too smol
print bigga one


