#40k-minis-and-armies
1 messages · Page 66 of 1
ooo I bet, those new terminator minis are amazing!
Shame they don't have lightning claws yet
one gallon is fine and I just throw it back in the bottle, been using the same bottle for about a year now
Even with the dissolved colors in there?
yes
Pure or mixed w/ water? (Ratio)
Parking artillery*
Basks, lemans, rogals, doesn't matter just park it
Sorry for the ping, can you just use a plastic container bin for soaking it in?
yes also pure
dont worry about pinging me, feel free
i mod on a very large server, I get pinged all the time for stupid things and this isnt stupid
Sounds good. Thanks for the advice!
Dotting the eyes was tough. Some of them look like they're wearing war paint not that their eyes are lit up. Had to mix paints for the first time, did bugman's glow and a dash of abaddon black for the holsters and pouches
I think I know how piles of shame build up now, these guys aren't even 100% and I want to build more
Eh, my "glowing" attempt looks like makeup 
One step at a time
Termies are tight
these are quite cute, might consider the new space marine "epic"
THEY FUCKING PAINTED THE EYES!!
How?????
I struggle painting the eyes on a standard marine! HELL NO am I painting the eyes on epic marines
literally just touch the model with the smallest fucking brush you could ever find
noticeable cause once they started to need to do more than just a single touch of red they gave up entirely too like with the auxilia mini's
Like "I have no face but they gave me two mustache tubes" charonites
or just the soldiers that are basically unpainted with a touch of green
I want Eldar and Orks in though
Maybe if this gets enough popularity
how do the factions work? Is this 3 different factions? SM, Solar Aux and Titans? Or do the Titans get split up for 1 for both sides?
They said in the stream and community article that you can form traitor or loyalist armies with detachments and each detachment can have any one of those factions
Like an army can have each of those factions but they play as traitor or loyalist
Skimmed through the article again and I misremembered that it was mentioned there, it wasn't.
But pretty sure that's what they said on the stream
that's neat
I like how hh box sets can be fully used by one side
like the age of darkness one
makes me wanna get into it
Looks like Legio mortis is going to getting some action soon in Legions Imperialis
dies irae goes brrrr
Gives me an excuse to get my Porphyrions done
Oooh what is this nice shade of green
Caliban green (air) / Vallejo Dark green (brush) base layer, then Vallejo sick green over the top with some Biel-tan green for the recesses
Ooh ty ty
Base done...
They said it has to do well if we want xenos
At least it wasn’t a guaranteed no,
Attempt at a new color scheme for my Frost Serpents. Any tips for using contrast paints? I think they came out a bit messy and I'm not sure how to prevent that.
oh btw, in case anyone still hasn't seen this:
Dawn of War in real life. This is Warhammer like you've never seen before.
We play out the Dawn of War computer game with Warhammer 40k 10th edition in a crazy custom Warhammer 40k narrative campaign battle report series. Check out The Magnet Baron for all your wargaming supermagnet needs!! https://themagnetbaron.com/pages/warhammer?utm_source=Y...
Is white paint supposed to be super liquid out of the pot?
it varies between brands but typically that has been my experience
I've followed tips that ppl have given me to paint white and it still looks shit. I really dont know what im doing wrong. Ive spent the entire day just trying to paint a helmet white
Wait a second
White is hard to paint, what color did you prime with?
seer gray and then ulthan gray on top. Ive had to strip the helmet 3 times now
ive tried to thin the paint to galze it on, ive tried to apply it thick. So far nothing has worked
Thin and then apply an actual white like titanium white. That tends to work well for me
Yeah but i have already started painting with ulthan grey so i have to continue now.
also youtubers just crank out the white like its nothing. I dont know how they do it.
We had plenty of you guys asking us to do painting tutorial for Duncan's first miniature from a video we posted a few weeks back (6 Things I wish I knew when I started painting). Well, we were glad to oblige and are more than happy to do a video showing you how to paint The Void Knights! We hope you guys enjoy it 😊
Remember you can join up and ...
waiting
isnt that just warhammer 40k?
i feel liek these are gonna cost as much as normal warhammer lmao
do you all think I could proxy some mkVI marines as phobos marines for a kill team? assuming i take one with a vox system
ye but with base mechanics
im selling most of my horus heresy stuff but i wanna keep 10 marines as a squad just to have as a kill team
and assuming the base size is the same
it should be fine?
i mean i don't see why not
I think that the tactical marine killteam os only like 6 models
she want's to proxy them as phobos, also yeah it is
*she
oh sorry
Ohhh okay
Anyone else with ulthan grey could you check if it is drippy/ runny when opened? Because mine is and im having many issues with it.
30k world eaters
mine isnt
give it a good shake
like a really good shake
also some citadel paints do tend to be thinner than others
mostly metallics in my experience
but ulthuan grey isnt one of those
Im planning the vet guard kill team from the cadian shock troops but should i build them from 2 standard troop boxes or pick the command squad for the second
I didn't know what I was doing wrong so i just stuck 5 drops of medium in there because fuck it why not. Im on the verge.
It wasnt thin thats the thing
it was just really runny
so adding water to it turned it into a wash. even just the water from my palette was enough to make it like really wet.
someone told me to shake it for 2-3 mins while i shook it for around 20 sec. That might have been where i went wrong but oh well. Ive got another helmet ready so ill continue to torture myself in the morning.
Testing new bullet impact ideas
Cataphractii Terminators or Relic Terminators?
Cats, although they will be chaos terminators
kk
I plan to do a light dry brush of black over the front of the flamer termi
also the squad is a legal chaos terminator team, 1 power sword, 3 fists and a chain fist
The flamer has the chainfist as he's the point man in a bunker so needs to be able to open doors
Me like the dmg
Thank you! Just a simple hand drill and a hobby knife
I should upgrade my drill
Poor thing is ancient now
A perfectly good one. Love my army painter drill
never add medium to a paint put, and never add a medium to it if you dont know what type of medium the paint you're using uses, it will cause more problems
like addint a PU medium to a PVA medium will result in a ton of problems
Good timing; left the basilisk in LA Awesome for about 24 hours. Looks like it’s working as in certain spots (like the railing) it’s grey again but there is still quite a bit on there in places, namely the cupola and the gun shield. When I’m scrubbing with a toothbrush am I supposed to apply any soap or am I just supplying elbow grease? Might just wait another 12 hours or so and give it another scrub
I scrub it off, rinse it then throw it back in
unles with IPA, it really doesnt cause issues with extended exposures
if it cant strip the paint, the paint just wont come off from any paint stripper unless its something like acetone
I gotcha. Alright I’ll keep that in mind
Stuart Nicolson felt he lost his purpose when an injury ended his career as a firefighter. But he stumbled upon a new passion in a hobby shop — painting miniatures — and has turned it into a way to help people.
Read more: http://www.cbc.ca/news
»»» Subscribe to CBC News to watch more videos: http://bit.ly/1RreYWS
Connect with CBC News Online:...
@plush swift essentially the before and after.
I quite like the cracked and patchy look. A lot more accurate to real tank armour
Looks more like the quality of paint on an artillery piece that’s mass produced
But I have a soft spot for battle damage and weathering
def could use more time in the soak
Aye back in it goes. So the water that I’ve been using to wash and scrub the model with, what’s the proper way to dispose of it
i just let it dry out in a bucket
Alright sounds like a plan.
I will kill you with power of the emperor! And this plasma gun i found! rolls 1
Ive just finished all my marines, just need to do some touch up work, im not happy with the plasma guns so im gonna redo those when i have more experience painting. But ive finished them to a playable state so im happy for now
Another Hearthkyn stands ready... 5/10 🙃
If I had any leagues minis, I would create a homebrew clan (?) in mostly black with yellow contrast. The emblem would be a stylized Bat. Their name the "Vo-Tann-Clan". They are, unlike the other kin, artists and focused on reiteration of old vocal focused music of the 2nd millennium 
Kronus hegemony already stole it from you I think

I would go more for a really pitch black and very few points of yellow not like yellow pants
It would probably still look close enough
GW didn’t fuck around when they created those paint schemes
Cheeky wip
@sterile grail How did you paint your veterans helmet? also did you have to clean up after the shading and did the white not leave texture when fixing shading mistakes?
I paint them in multiple thin layers corax white. I usually avoid cleaning up too much because it can leave clogged up details.
which is why shading in white can be nerve wrecking for me
Has anyone had any luck with army painter brush on primer?
I just used the "Regimental Brush" to do some painting of main parts for my votann infantry... turned out good
Hmm fair enough
This is the Votann i painted the big parts with:
Got the regimental brush in a set with a dry brush and a detail brush for about 25€
poster boys decals
It’s the guy from the warhammer space marine game
@plush swift sorry for the ping, I’ve let my basilisk sit in a LA bath for about 41 hours now. It doesn’t look clump anymore but the plastic seems to be tinted tan (the primer I used) still. I cannot scrub it off with a toothbrush and I took a wooden toothpick to the model to see if it could get make a mark, to no avail. My question is at this point would it even be worth continuing to let it soak or pull it out, wash it with soap and water and re-prime? Been seeing a lot of people saying it takes 24-36 hours tops but maybe that’s just for minis the size of space marines etc
Rock and stone
What primer did you use?
But whats the diffrence between rock and stone? 😉
Zandri dust spray
🤣 what i answered is a quote out of the game "Deep Rock Galactic" where also "Rock and Stone" is from ^^
Oh I know about the rock and stone to the bone
Yeah, I used it for a bunch of marines and it works pretty nice. Goes on pretty well.
Depends on what i want to paint... i use classic base paint etc. for my black templars... for the votann i use white scar air and imperial fist yellow contrast to get the non carapace armor parts done.
What's some good suggestions for an alien planet base for a diorama? I'm thinking dark grey/black soil, red grass and purple rocks, but I'm open to suggestions
You seen my votann? Could be a guess (the bases)
oh, nice
Looks like the Dense Biozone biome from DRG
Are those toothbrush heads you used?
Nup grass tufts from green stuff world
so with a lot of those sprays what will happen is it fuses to the plastic, making it much harder to remove. how does it look after the second soak?
Much the same. The gunky stuff is all gone but it’s definitely tinted tan
there isnt much you can do about that
Okay, I can live with that (it’ll be tan anyway so oh well. Is the primer still intact to paint over or would I need to apply another thin coat?
No its not
its part of the plastic now
Alrighty another thin coat it is. I’m guessing take it out, wash it in hand soap and water and let it dry?
yep
Okay thanks for all your help man, appreciate it
This be an oooooold mini I did when I was starting, still really happy about it
Which Universe? Haven't seen this in 40k before tbh
Not 40k
This be Fantasy
Ah i see ^^ but looks good... i think when u like things like this in 40k you would have fund with nurgle ^^
Speaking of
Ready for priming
I've been thinking about ne of these as a counts-as maulerfiend.
i mainly paint black templars and started with 40k excatly 2 months ago (from oldest to newest the first image being my very first one)
The cross inside the eagle on the dread is a beautiful touch
For anyone with a wet palette, how often do you change sheets?
Wip
Oh my goodness
How did you do the handprint
painted it with my size 2 Monument hobbies brush
Anyone know where i can get a levithan head
Apparently i havent got sides
I dunno if i had previously took it off for whatever reason
Or if it just never came with one
But uh yeah
Anyone know where i can buy em
When looking at the Cadian style basilisk, would the main gun look better in tan or green?
4th officially completed miniature!@plush swift how time goes by. So glad i could see drastic changes.
As I said, you've progress a ton
Im kinda pissed i didnt wait building and painting kasrkin team before getting cadian upgrade sprew. I had idea for demo trooper
I had to thank you because your comments on the thickened white actually made me improve it
yeah your white is looking pretty ok these days
is it just me or is the phobos dude on the far right missing a shoulderpad?
they dont have a shoulder pad right arm
i swear they do
look it up
Did you hand paint these checkers on the shoulder? Looks friggin poggers 
Looks for tau fire warriors. Similar concept
Different tastes I guess. I like the sleek design. Nice contrast in comparison to the whole setting
That's impressive growth!
Might be titanicus, I don’t know if the full scale one has volkite
I could be wrong though
i wish i could but nope i use decals :)))
thank you very much
I am happy with the result so far, he's going to look awesome when painted
Oooh, love the knick-knacks, makes it look so much more complete
side by side comparison, i have alot of ideas flowing through my head right now for my master seargant!
Oooh can't wait to see. Mk6 and phobos ❤️
MY WARBOSS YEAAAAAAH
That's an empty base 
you just dont got roight orky eyez ya git
Which waaghboss? Ever seen a purple orc?
havent given him a name yet
Gitzhead the unseen boss
Orks orks orks orks
smilez in waaagh!
Curious! what chapter are these? Or are they a homebrew
Not sure but CL maybe
I mean, outside of the green symbol it looks identical to the CL
My wip krieger
Oooo I like
nnniiiice french colorscheme, same im going for. tho i put brown pants on them, my commandsquad will have red pants
homebrew
Any suggestions how to mount a missile launcher on this:
The top is already on : /
Blue tack would work?
Armor color is the Veterency of the specific marine. Black, white the gold. The right knee (white and gold only) denotes the Company, and on that said knee (or tilting shield) it will also have their squad number written in their native numeric system
Here is that dreadnought and captain terminator at the end of yesterday.
i want a single krieger to put between all of my sister squads
is there a krieger model with a 2 handed shovel?
or one that just holds it with both hands?
Ara Ara intensifies
nah they see him as the most devoted warrior they have ever seen as he just charges into the battle for the god emperor
and since sororitas fight stronger when an ally dies as they cherish the martyrdom hed be perfect lol
Ara Ara
The pfp, the name and the text are making quite the funny
Anyway, have this Khornate Giant I did a Time ago
Painted my first Crimson Fist today
Very nice, I like the lenses on the rocket
Need to get on to making the little base connector that completes the micro-diorama on these...
hehe, smol titan :3
Just bought this enigma on eBay
Worse case; 20 bucks for an ancient and a captain
And some bits
Great deal
I raise you the ork version
Da biggest of bos's
Which Legion Praetor is better? The one with the power sword or one with the power axe?
I'm thinking about getting a 30k box.
And I can't make up my mind which Legion I'll make. My top pics are IW, NL, WE, WB and AL.
@brisk vapor What paints do you use when airbrushing? I'm trying to use citadel's zandri dust from their "air" line, and it just comes out as wet splotches most of the time (not spiderwebbing though, I can avoid that at least), and I also get what I presume is tip dry. Maybe I'm thinning too much (tried vallejo flow improver several days ago, distilled water today)? Is citadel air just that bad? Is this just a skill issue? Currently using the airbrush feels like an exercise in frustration.
I also tried vallejo's game air imperial blue, that went a little better when diluted a bit, but I don't know if that was coincidence or not.
The one upside is that these coats dry thin, even if inconsistent, so at least I'm getting better results than with poorly thinned brushwork.
Okay, note for future reference. Pick an easier spot to put hazard stripes
Looking back I feel like it was a mistake painting the pauldrons black
How so?
Having had a look at some of their artwork their pauldrons are blue for the most part whilst some also have black
Well the black looks good, maybe use it for a squad marking perhaps?
Like here where i assume this is from a codex they're blue
Black shoulders could be used as heavy weapon squads maybe?
Could do tbh I didnt think of that
I will take that into consideration as their heraldry is semi-vain but for now I will keep it consistent for the most part. Thxs for the idea :3
No worries ^^
All I’ll say is make sure to keep squad’s consistent, if you have 1 man in a squad who’s got odd shoulders to the rest it’ll stick out more than it one squads had odd shoulders compared to the rest of the army
If that makes sense?
Duncan Rhodes void knights 🤤
Yh that does make sense. I have a couple of marines; one with a borderless pauldron and the other with a studded pauldron so I shall have to spice things up with them so that they dont look out of place
Glad it did ^^ honestly, just have an experiment and see what works best for you
I shall thank you once again, have a good night :3
It’s like my iron warriors have very little consistency, but that’s the idea of them. All the marines have ever so slight differences to represent their tendency to field mod their armour
No worries, take it easy ^^
There’s something weird about this here ork
They food a Book with a red cover
They got smart fasta
And they provided said book
Also any tip on how to make the faces on the Sword look brighter?
The one with the sword looks sweet might get one
Uuuuh it's
From a starter pack
Like, the box you get when you're beginning
This one was chaos cultist and Space Marine against dark angels
There's suppose to be an other csm but... Can't find it anywhere
Cogs of Vashtor Army box?
Oh i see older Kit... It's the " Warhammer 40k’s Dark Vengeance Starter Kit."
Launched 2016
There is the dude
Yes!
Currently there is an german Ebay offer for a sealed box 234,99€
It's funny to see that there is a lone german person that still owns a original sealed limited edition of that army box and wants to sell it like said above 🤣
something for real collectors
Bit of a niche one, but I recently identified the specific model kit that GW used more than twenty years ago to create the civilian truck for the battle reports for their 54mm scale RPG/Skirmish game, "Inquisitor".
This is their original, my reconstruction (including a few OOP parts I had to track down), and it alongside my previously scratchbuilt 54mm vehicles (a Sentinel, Razorback and Arvus - which I'm actually quite happy to see featured in some Darktide maps; it's a lovely little design).
Noice!
Progress made today on the basilisk
Whats a good recipe for african American skin? Ive heard a red base with gulliman skintone contrast overtop and to avoid browns
No clue
I use pretty much only Vallejo and Citadel. I've not much used the air line but it should work better straight out the bottle. What do you mean by wet splotches? Is the spray uneven or is it just so thin that it barely shows anything? The thing with flow improver is that you add a drop or two of that in addition to any other reducer you might be using for the best results
Spray is uneven. I haven't tried flow improver yet, will do tonight.
That might be caused by the compressor if the pressure doesn't stay stable
Spray was as if I had my airbrush set on drizzle as opposed to it's desired "mist" setting. My compressor has a little tank, so preasure should be steady.
Or well there can be a myriad of reasons from a bit of dried paint within the nozzle to a faulty airhose
Oof
You could try to disassemble the airbrush and thoroughly clean the parts
Having even the tiniest bit of dried paint in this nozzle part can cause havoc to your spray
Yeah, good shout. Thanks man, I'll try these things.
No problem
Kharn looking juicy
What’s a World Eater without a bunch of skulls and blood 🤷♂️
What is a good space marine set, if I wanna do a custom paint job?
Bladeguard Veterans have nice poses... Black Templars Swordbrethren have nice accessoires.... Dark Angels Company Veterans have something mysterious cuz of their cloaks/tabbards
And Deathwatch Squads have insane compilation of different Marine types plus you can nearly include any Chapter.
Looks Great
I was looking at the Deathwatch but unfortunately they sold out as well as the Dark Angels
Must it be a GW online store order?
Yeah I live in a small town in Australia
i see okay than its bad
And the one shop that I know sells Workshops stuff rarely has stuff like combat patrols or even minis for that matter
For me battle patrol box deathwatch isn't sold out online...
I wish crusaders came with one more neophyte X_×
xD a thing i also thought a while ago 😄
Lulz.... than it's region orientated... in EU i have it as "buyable"
Damn
Getting to impatient for the new scouts to release xD
I also wait for 'em
It's "funny" (sarcasm) to see, that GW seems to have different stocks for different regions
Makes some sense
cuz online says for me it will be sold out of their main stock in UK
Baffled me when I recently discovered gw has a factory here in the US
Hmm 🤔 then they seem to produce a bit more "local"
what would explain much things
Was wild to find the usual warhammer store but also store labeled Games workshop on the east coast
Box of intercessors could be worth a look, can be used in deathwatch easily and a very simple base to practice painting
Maybe I’m currently doing two Grey Knight terminator squads and I was thinking about making a proper army of Space Marines after
Nice and simple marine army idea, 1 character, 10 intercessors (in one or two squads up to you) heavy weapon support (hellblasters for example) then redemptor or other vehicle
Any ideas for a Leader/Character?
I’m not soo sure on deathwatch characters, but you can’t go wrong with the primaris Lieutenant
Or primaris Captain,
Basically which ever one you prefer
The scheme I had in mind was something of a Dark Angels successor Chapter, with muggy Greens, Whites and Steels colours
Oooh makes sense.
If you can find the point sheet, I’d suggest having a play with making a list to 1000 points to start with
Is 1000 points pretty standard?
Thanks to your idea I've decided that based on your idea and the art I based it on my firstborns will have the black pauldrons and my primaris which are on the way will have blue instead :3
Yeah basically
Haha, glad I could help, they should look good when done!
Thank you too I'll be sure to post them when they're done :3
Where can I find the value of each set?
1 sec
If you go there that the most up to date point sheet, space marines are near the bottom
Sounds awesome
is this for the 10th?
Yes that’s current points for 10th
oh, so no seperate points for whatever weapons they have i assume?
Nope, wargear is all free now
@halcyon dome A very basic idea, feel free to change and edit it as much as you want.
1 x Primaris Captain - 80
1 x Primaris Lieutenant- 75
5 x Intercessor - 95
5 x Intercessor - 95
10 x Hellblasters- 250
1 x Redemptor - 225
1 x Gladiator Lancer -145
Total : 965
(Left some spare points so you could take any enhancements)
Thanks I’ll look into it
Sadly it wouldn’t be as soon as I’d like since GW minis and paints costs an arm and a leg
Yeah, luckily that list only needs one box of intercessors and one box of hellblasters
Also what are enchantments? (Never played or build a Warhammer army)
An upgrade you can slap on character units
Little upgrades you can put in characters, every army has a few and they do different things. They have a small point cost to go with them, hence why I left a few points spare
You can take up to 3 right?
I have no idea
Aw damn
All I know is you can’t have two of the same
And not on named characters?
I think so?
Usually bring my book to work so I can slack off.
Didn't today
get the app its all on there
Anyone one know a good colour that goes well with Steel Legion Drab as a secondary for a Space Marine
Wraithbone maybe?
The scheme I had in mind was something of a Dark Angels successor Chapter, with muggy Greens and Steels colours
Or a Khorne red for a dar crimson colour
The idea I had was a the Drab being the main colour with Steel accents and one arm and the helmet being a different colour
Similar to how the deathwatch have one arm silver
Gave it a wash and drybrush before work. Should be able to finish it tonight
hey does anyone know a sick perturabo model to 3d print?
i saw this and thought it was suuper sick
but its probably homemade and not for sale
Hmm, I wonder if I’d be able to find a way to make some space marines at rest? Have them crew one of them for my iron warriors?
Weird hammer
Then again, he doesn't have his personal one anymore, does he?
Well Maneus wasn’t using it :3
Balthasar gold is my favorite drink
Could someone give a 2nd party opinion on this face because Idk if it looks decent or if I should strip it. I've spent way too long looking at it at this point
it looks good idk why you would strip it
ive made quite a lot of mistakes in the process, so i was just going to restart without making those mistakes again.
Finally painting again... I hate hazard stripes
Meanwhile this is about what my face painting skills look like
Face looks good, but needs butchers nails. Because nails make everything angrier
Alright, you guys saved me around an hour and a half ty
Vet Guard kill team i finished over july 4th weekend
looks good though, i like the eyes. Maybe matt the skin down a bit
Tomorrow we do the stripes :3
That was one of the mistakes. Ive put on 3 layers of lahmian medium so its a lot less glossy than it was. It was my first time using it, so i don't know if i can get away with using more.
Oh beneficent lord of stripes. Bless this lowly being with the knowledge of the hazard stripe
Jokes aside I am starting to think I should give up on doing it by hand and actually just use masking tape
Don’t panic, I haven’t forgotten. When I get home from work I’ll show you
Anyone with experience using lahmian medium, could you tell me if putting the medium on a glossy surface will completely get rid of the gloss if i put enough layers on? I'm not sure how it works.
I don't know if modern lahmian medium finish has a satin or matte finish, but after 3 coats I doubt the sheen will change witn more applications.
Hive fleet Nostromo work in progress
Thanks!
I feel I fucked the back up with how I washed it but the rest of it im really super happy with
Jormungandr moment
I like jorm’s colours! But think I overdid the wash
Not panicking 😋 only a little fun. Still my warhammer friends have been telling me to use masking tape, but my stubborn ass has been too proud to give up 😅
It's become somewhat of a personal vendetta to paint the stripes by hand.
And there has been progress. I was pretty happy with today's shoulder pad... but them legs ... always the legs 🦵
Still my shoulder stripes seem to be consistent and get a pass. I call that a win for now
I smell soy boy stench of iron warriors
Maybe in the future but this is my ultramarines breacher company.
Well 30 breachers + 10 Praetorians (melee breachers) backed up by two levithians and a 10 man squad of missile launchers.... because its funny returning fire in horus heresy
Iron warriors are my main army but I am a world eater at heart.
So less soy boy and more:
Shâhka Bloodless had no idea where he was or what was going on.
usually not strong effects. I recommend using matt medium like stormshield. Rmb to thin down and do it multiple layer instead of one thick creamy coat.
I love Shâka Bloodless. I doubt anyone was as lost to the nails as him.
I'll miss that magnificent bastard
Current wip on cthonian berzerk thane with robotic auxiliar...
Is that a vile slaaneshii I see?
Nonsense! These are LOYAL sons of DORN. Not in any way taken from Fulgrim's TRAITOROUS gene stock
Which sons of Dorn? looks in zealous Black Templar
The Sons of the Phoenix of course!
Checked it.. Black Templars approved...
Hehe a loyal child of a prancing peacock pretending to be the son of someone else due to the sins of the father I see
Could you imagine a imperial fist fallen to slaanesh, and just talks about defences but in a very sexual way "this wall is very erect".
Loyalist Fulgrim was pretty cool
He was. Then the sword happened
Fulgrim claimed to be a empath and stopped kurze going to his therapy sessions.
"gimme more of that naughty plast steel ugh and by the way i need also a ton of those insane sexy ceramite wall parts aah"
Also you should add ... before erect.
Becomes more slaaneshy that way
🤣
The degeneration of the emperors children is sad and depraved. But still allowed for good stories.
The ancient awakens
Do you think that EC will have a comeback in some way?
Fulgrim got what he deserved, right where it hurt.
His pride
They already do that anyway
Ye but i thought more like with own codex, new minis etc.
Nope too high on warp snuff nowadays
A fulgrim daemon model would be sick..... in a cool and I wish to void the contents of bowel way
Oh that will absolutely be a thing. Mono god armies are here to stay
A friend of mine is pretty pissed cuz there was now long nothing really new for EC and he wants to play them af but only with new minis etc. 🤣
(Cries in night lord)
We probably get EC in 10th. And i look forward to massacring them in eaters of worlds
My Black Templars and my Votann will be waitin' to smash something 😄
Or be smashed in eaters of worlds
Hmm i fear more Astra militarum than Chaos currently 😄
.... probably the eaters who get smashed but you know
Oh traitor guard are fun
I need more
Not traitors Xd
Oh yeah... the gun line
Currently lost heavily a game against standart astra militarum... but have beaten the shit out of some chaos dudes xD
I can't wait to grab the new guard kits because I need to make a militia army for heresy because I want to suffer..... and not just financially
just was unlucky with the dices in the match against the militarum 😄
How much did they focus on deamon engines
Werent Iron warriors... Word bearers.. XD
Because forgefiends are apparently a warcrime in 10th. Have yet to test it but its what i heard
(Ultramarines starts foaming at the math)
i'm waiting for the army the gf of my best bud is currently building... Will be a pain to fight against Slaneesh
(Is why I'm trying to speed build my fiend and then order more... mostly because I like the fiends)
And soon i need to save money XD
I'm just trying to finish my ultramarines completely the fixing up my night lords..... because being a adult I have to pay for other things that I do not want to pay for.
Yeah slaanesh strong so far... I'm waiting for the inevitable nerf of all that is CSM
Things that define adulthood
While not necessarily 40k, i used blender to make a 40k inspired mini and printed it.
Though I may use it for a few games of RT table top with friends.
Looks like a pre imperial warrior of some faction....
or like a proto thunder warrior concept
I liked the idea of the model being a mining rig thats been heavily reinforced by some Ore baron, armed with a lasgun, and sent to some warfront to protect the domain
Looks like he woke up and chose to do war crimes for the emperor
only downside is that I have to use GS to fill in the left hand and wrist area as the webbing between the hand and armor came off with the support on the gun's hands.
Oof
I might leave the trigger hand on the body next time so I don't have to worry about it next print.
🤔 where to store a Thunderhawk gunship?!.... I want the FW Model (yes its expensive i know) and i just have relized, that i have nearly no space to store it... Can't put it on a shelf cuz of my cat...
maybe in something like a tbox or get a closable cabinet with a door?
No space for that currently... eventually investing some more work on some stonger magnets so that i can hang it up so it seems like it is flying...
But i think i have to figure out what to do when this gem will arrive at my house... or have to look up in the net how big this beast really is...
How should i paint lightnings on night lords armour? Just thin lines with corax white?
Depends on what you wanna do... and which setting it should be... only edge highlighting to implement a certainty of sun/light? or more like alien planet with a blue/purple sun by sunset?
You always can look for some tutorials on YT
Some sort of light blue and then white dots on where the lightning splits / reaches the end .... find this works the best but you need a really fine detail brush or you may hate yourself even more.
Or do some white lightning then carefully put contrast talassar blue over it.
I just have night lords blue and corax white
So ill make due with those
Just some streaks across the armour
what could posdibly go wrong?
Crabs
That’s a lot of talk coming from an ultramarine :3
that gore looks disgusting. i love it!
My brother in the imperium! What is this lovely gold?
Blessed ancient, never stop stomping
Thank you!!
I’m one day going to get his stompier brother
... hydra dominatus or Ave dominus nox?
Base coat done
Hot damn that is a big shrine
Ave dominus
i haven't been able to build or paint anything for almost a week, my workshop is boiling constantly
Aye.. humidity + heat has stalled my work too
if the windows could be slid open like the ones in my room I could really just take one of the old air conditioners from my granddad's place and install it but that's not the case, windows can't be opened
Probably done for the day still need to redo some parts for a second coat Probably a few days before I work on my kill team veteran guard.
I'm liking the detailing
Thanks 
Just a smidge too tired to do the tassels on the rest of them, but that’ll be tomorrow’s job
any tips on starting a necron army
ive never built minis b4
but wanna start collecting necrons
but dont wanna go broke lol
For the warmaster!
Imagine your primarch basically making you play battle royal lottery with your brothers rather than constructively working to make improvements (cringe)
But nice model, I too have a stompy model
Ultramarines when they talk down to World Eaters like they’ve ever felt pain and desecration in their lives on Mccragge
I am tempted to do some world eaters but I might wait and see if some stuff about blackshields come out for HH....but I do want to do a militia army
I’m in very bad hobby debt
I have a tau combat patrol that I’ve stripped several times, primed wrong multiple times
It’s overall just a nightmare and I’m too unmotivated to finish it
How do you wanna paint them?
Try practicing on things that don’t matter as much, watch a lot of tutorials and build up your skills, don’t be afraid of mistakes, make every decision carefully
Farsight enclaves
Did a grey prime for some dumbass reason
Just picked up some black contrast paint and some lighter red shades for highlights
I'm not super down with painting tau as I'm too use to painting spesh marines but I too have too many tau still to paint.
I prime black, dry brush grey seer, then dry brush edges with a brighter white..... mostly getting areas that light would hit.
Then flesh tearers contrast, lemme see if I have a recent pic.
This is my somewhat end result but I still have a lot to do.... but urs fairly quick and easy.
Think I used rakarth flesh and nuln oil .... think I gave the whole model nuln oil because contrast can scrape of easily.
And then green world stuff ultra matt varnish at least on the fabrics.
Your fire warriors are what I wish mine looked like
I think I’m using too much nuln oil cuz mine look shiny
Yea that's ussualy the case
Less is more saying is pretty good rule of thumb to follow
I was told to put it all over the smaller models 💀
I take like an hour to do one fire warrior it’s excruciating because I keep going back to fix things and I need to rethin my paint because it dries too fast
Matt varnish can really help out at that point..... it really annoyed me as well, I use green world ultra matt varnish for my ultramarines as well and I love it.
I do think it's important to figure out what works for you.... I'm honestly not the best painter and cannot sit there for hours most of the time.
Cause if you are just suffering it doesn't help..... so I skim through a lot of videos seeing what might work because I don't have the time to be a oerfectionist even if I want to be.
It sucks and it really demotivates me to paint
Because I wanna make quality minis and actually play tabletop but noooo
Issues pop up and I lose the will to paint
It’s been months since I got the kit and I’m maybe 1/4th done
Maybe set yourself some goals...... I try to do 5 models a week as I work full but granted my methods are very simple.
Ew tau
I must murder you, revenge for kitten!!
Oh, that's fire. 🔥
I stopped using nuln oil all toghether because its glossy. I only use it on metal and scriptures/ scrolls. From my personal experience i enjoyed using black thinned down wash more.
looks great did you completely freehand the powerfist symbol on the third guy
Not completely, this is decalls
ah so you colored the opposite color on top of that decal?
Non, this is a basic decall
wuttt, is this decal in the leviathan set?
Yup
just to be sure you are talking about this one right? 🫠
Yes
I just got the leviathan set, anyone got tips for getting more brittle pieces (eg. swords) out of their casing without breaking them?
I've already done this twice, but its nothing that cant (probably) be fixed with wood glue
I love it!! Where did you get the Marie on the base?
That looks kinda like the Alpharius base decoration
I love the power fists
Finally decided to add a colored rim to the bases of my bloodletter. I figured a mephiston red because well...Khorne Daemons
Are Word Bearers a good CSM Legion?
I have a box of Legionnaires just waiting to be assembled and painted.
And I just don't feel like making Failbaddon's.
Just play whichever is the most interesting
I play iron warriors because tank go brrr
Define "good CSM Legion". Everyone has their own perception of what they find cool, so what I would build (night lords) may not be your cup of tea. You can also look through old chaos space marine codexes (can be found online) through the various warbands, mabye that's more your thing, you don't have to go with a major legion.
How?
I really like the Night Lords and the Iron Warriors, but they just don't feel right with Chaos armor.
Especially the Night Lords.
But one thing's for sure. I am NOT going with black and pink.
Again, plenty of warbands to choose from.
Few when compared to the number of Chapters.
Sons of Lorgar probably touch kids, but they know a lot about Chaos.
Well I use the Horus Heresy marines and do some kitbashing
Like so
That is all Mk VI ‘beaky’ armour
Here are just a couple from an older codex. You can probably find a myriad more online
Iron Warriors definetly look better in 30k armor.
Collect crimson Slaughter
Crimson Slaughter chaos gang
We love hearing voices
Legalise mass murder
This army was sponsored by the dark vengeance box set
You have no idea how tempting a world eaters army has been lately
IRON WITHINNNNNN-
Thanks mate
I speak from experience. They are very nice
Spare pieces I had lying around and a single kneeling leg..... word bearers only deserve one leg
all 30 breachers and 10 Praetorians transfers done...... now just the pain of eye lenses
It's lot of shield
Pretty boring to paint, no ?
Oooh Oki, I wanted to try something like that
This looks sick
Gives me a lot of spartan vibes
I might add stuff to the shields but it's alright..... more or less just painting tatical marines but with shields edition
Anyone have a decent guide (not watercolour) on how to paint nebualae and galaxies and stuff?
What does contrast medium do? Is it to mix with normal paint and use as a contrast paint?
It's the medium (as opposed to the pigment/pigment mix) of GW contrast paints, and you use it to either get the same finish as with contrast paints, or to thin contrast paints to get the same effect, but diluted.
I don't think it can turn a layer paint into a contrast paint.
Maybe @plush swift ?
Free hand on it ?
paint one pauldren white??
Oh I don't have a guide for it is more of just a look at some source photos and then use what your mind says is correct
so i got some inspiration from twitter to do something like This for my Titanicus models, but i don't know how i'd do the cape except for like, maybe Milliput?
i don't know if i have a lot so i'd likely only drape part of the carapace/one shoulder on each knight, maybe more on the Reaver, but still it's a cool idea
i know i have some old sticks or bars from chaos knights i can use as arrows/javelins sticking out of the shoulders and back
or i could just use bits of sprue really
Just a heads up, the titanicus knights are super tiny
A questoris knight is about space marine height
The warmaster Titan is awesome though
I wanna get the iconclast and the plasma exterminator ones
Just finished making a war-hound titan via printing the bits. Had to reinfirce the knees due to its weight
I LOVE IT
Took me about a week to make sure the pets were to scale and fit properly together. As I don’t have any drills and bits I had to reinforce the knees to support its weight. Took about 3kg of resin to make which cost me about £60. Still cheaper than forgeworld at least.
That's still awesome, what colour scheme you thinking?
I currently have planned to metallic silver the legs and feet and potentially a yellow/blue/red scheme for the rest of it.
do I do the top half of the helmet in mechanicus grey, all white or a lighter grey?
Not quite like that. On my end I planned to have a blood red in the middle and fade it to blue then have yellow on the edges
Ahh I get you
Do the top grey of the rest of the armour and leave the lower face area white
With apothecaries don’t they usually have pure white armour anyway?
I hate painting pure whites and these guysa re carcharodons
Usually yes... like psykers are forced to wear blue
Ah fair enough. You could use some red and dry brush it on to make it look bloodstained. Would fit the scheme of “space sharks”
It’s something I did a while back for some of my older melee tyranids. Just had some blood angels red contrast and blood for the blood god mixed together and applied it in thin flicks on the claws and weapons to make it look as if they just tore something apart recently
Do the helmet like this maybe?
🔥
That's not mine btw 😅
But still nice work
been using these as some variance of inspo
Oh absoluetly it is, just didn't want people thinking it was mine lol
agian, off the internet
One on the left, I definitely think it'll do good
Buuuuut both look great so honestly you can't go wrong with either
🤔 thinking bout giving the leviathan box terminator squad sergeant a brass helmet... should fit for Black Templars or not?🤔
Both good suggestions.. but i would make the shoulderpad with the double helix white as sign that it is an apothecary..
I went for a deathwatch themed look for the leviathan box set
gonna do the grey top-half of the helmet and then yeah the white shoulder piece
gold wings and red helix
I am NOT freehanding a shark though
i bet you could
Nahh my freehanding is terrible
The marines out of leviathan are reinforcements to my current crusade setup... when i have done them, i nearly have 3000 points of black templars 
my freehand isn't much better 😅
That is a decent amount of points….
Wanna know a freehand life hack?
From what I’ve found deathwatch and dark angels are the easier of the chapters to paint as they don’t have their sergeants stick out with different helmet colours. Makes painting them easier as as it makes painting them uniform
The only “freehanding” I’ve done is this - whale shark spots on a carcharodon to represent my fursona lmaoooooo
oh that's really good
it's messy as hell
nah looks fine
@rare hornet @visual turret
Use watercolours for freehand stuff... if u f*** up outlines u can wash it aesy without any problems... works fine
My current carc’s :)
i adore that dread!!
oh wait, is that a termi?
Just taken a real proper look at them, I absolutely love all those details
Just yes
Absolutely love them all
Warhound Titan my beloved
I planned to make a few more later on after I finish painting this one up. Hoped to try and make a display with a few of them
I plan to alter the torso part next on my next titan project to try and make a proper scale dire-wolf instead of the Adeptus titanicus ones. Would be interusting on how that would go
I want one Adeptus titanicus model just so I can use it when the new epic for horus heresy drops
That’s fair I suppose. I just thought that the idea to have actual scale titans and play titanicus using the actual titans and not the mini ones would be a bit of a blast to try some day
Oh jeez
The board size
It would be fun
But would take a long time to set up and play
It’s why I wanted to get into epic horus heresy
Paint some tiny imperial fists, have a warmaster Titan
i know
i know basic scale of a Warlord being about 3/4 as tall as a knight
and a Reaver is Armiger size, give or take?
maybe a little more
Something like that
but yeah
i got the Cerastus knights
which i think are a little bigger
than like
primaris scale
not by much
like a few cm taller
but yeah i know just regular questoris knights are pretty much exactly primaris scale
my friend's brother is super into titanicus
Yeah I have a picture for reference
i do too lol
there are four knights in the box though which is why the milliput usage concerns me slightly
cuz i do not have a lot left
and idk if i have enough for both the reaver and the set of knights
There’s a scale reference
about what i expected
Reaver is like redemptor scale
Yeah you’re splitting hairs really
if thats the size of titanicus and the new Legion shit. I may get into that and Aeronautica
Yeah the titans models are scale
look rad as fuck
I DO
want to do the Voidship game
but no idea where to start with that
they aren't being remodelled except the bases are becoming a slight bit lower profile
@final folio @celest zealot Please ignore the bad quality and lighting it was hard to get them all in frame
Also the terminator is the same height as the normal knight
mhm
Don't have a reaver built i'm afraid
The warlord is not too much shorter than a regular 40K knight
It's nowhere near as chunky though
next question! Should I do the tabard in red or plain cloth
Hmm, A nice cloth would do well I think?
What colour cloth you thinking? cream coloured?
yeah like using Rakarth
Yeah having just done it in red I don't like it
so Rakarth it is (after it dries)
Oh yeah Rakarth is perfect
plus it would fit with the rest of the sternguard cloth
oooh yeah be good
Im now specifically noticing the Lighting.
;-;
but yeah the scale is dope
ill probably pick up a starter box or what ever I can print
You can see about picking up some titans in the meantime
A reaver with lass and gatling as never let me down
Finally starting the trims
He’s done
He’s perfect!!
He’s come out amazingly!
Way to style on us with that beautiful carc apothecary. I love him
I give him 8 out of 8 skulls
Who remembers this classic model
For a brick, he flew pretty good!
Treated myself to a lead Kharn
Current wip on cthonian berzerk theyn... the auxilary robot nearly ready... some spots still need to be tidied up.. stone on base is made out of stirland mud 🤣
I mean, now that we got epic scale back there's no better time
i think you're out of luck on models until either GW restocks, or other suppliers can
i got my reaver and knights off of amazon
i was gonna get a warlord but nobody had it in stock
I literally managed to find only one person selling a warlord rn lol
i don't know
let me see rq
i think they're 8mm scale
here they are next to some Titanicus knights
the smaller knight is about Primaris size
so there's your scale
Ye, a bit bigger than expected
that happens in irl for me constantly as well. Planes look a lot smaller in pictures but when you have one next to something for scale they always turn out to be way bigger than originally thought
That's true, but I didn't expect them to be bigger than the knights lol
fair yeah, the bomber's massive
Not just the bomber, when you see a plane is usually 2/3 meters tall and the smaller one here is bigger than the knight torso (wich should be around 15 meters total)
Must be different scales or else that bomber got a submarine crew piloting it to need that much glass space lol
AI is the same scale as Titanicus
Then God damn those planes are big as fuck
yeah but for example the XB-19 bomber's wingspan is just over 40 meters
which is a huge ass plane granted
no sorry, it was 40m long and 64m wide
so even bigger
Oh yeah, I was referring more to the size of the other components than the wingspan
Wich can be ridicolous in rl too
Like the bombers engines are at the very least 2 times the size of an Antonov's engine lol
Also Atleast 2 to 3 times as long
mostly for this to happen
God why does that looks and sounds like it's written by an ork in disguise
it's from the Regimental Standard iirc
Anyhow funny, didn't know there was a reason given for the flying bricks design of most imperial stuff
Is that a McDonald’s space marine in your PFP?
I only use Amazon or ebay never using GW
Lol no, a drawing of mine, custom white scars successors
Oh my god, it looks good I’m sorry, the color scheme
Oh don't worry ahahah
Is that armor gravis or a different type?
It’s hard to tell some armor differences
Because it looks like gravis
Gravis, also the only difference is the helmet view hole, hussar wings and sword
Oh and the Aquila
The rest of the armour I literally used the Gravis models photo's as reference
Supposed to be an inceptor
My pfp isn’t drawn by anyone I know, and the artist is Ultrakints, I usually use pictures I find that are really cool, and this one was my favorite for Imperial Fists
I see the inceptor, just didn’t know if they used gravis
Oh yeah it's like, their main point
The only art I’m good at is painting models, not a drawer
So I respect those who can draw
I also remembered, aren’t those glowing feather pieces from Aeldari usually?
Autarch have similar styled wings on the back usually , but they are bigger and don't glow
I took inspiration from the polish winged Hussars back wings wich are similar, the glow effect is cause I couldn't decide if I wanted them as feathers or like afterburner style flames
Almost done
I know I shouldn't prime when it's humid outside, but how about resin to make water? I'm using it to form small puddles in a diorama
How did you make that? I don't recall that being a gw kit
Came with a magazine
neat
This im proud off
yeah the terrain piece is out of production afaik, called Haemotrope Reactor. Think it had rules at some point as well
during 8th edition
Yea my friend from the UK gave me it as a gift when he got the veteran kill team for me, apprently it's a set piece for the kill team mission
Finally finished the kfc guy himself
Super happy with this since i normally just do necrons so i had to use alot of new colors and ways to paint it
Looks good
this rocks man great job
Does he steal jeans?
he does
so, i was offered all these necrons for $600
is this a good deal
im new to the hobby with no minis, but ik i wanna have necrons as my army
the patrols r 9th ed
It's okayish I guess, not terrible savings but it does save a bit instead of buying all the minis individually
ok gotcha
i also found someone selling the indomitus half for like
either 90 or 120
so ill probably just go with that
bc $600 is a lot of money
It's good to start smaller too
yeah and id still need the paints and tools
gotcha
Yeah I actually heard much more about people having piles and piles of unpainted stuff more than people having problems with not having enough lol
yeah i think i found a better deal, some of the pieces r painted, some are built but unpainted, some are NOS still
over $600 in value for 350
i think the pieces that are NOS aren't even listed
Ye he does say so in the last bit
Sooooon
Technically not 40k but here is my first ever Clone Trooper I painted today. My first attempt at working with white. Such a learning curve that's gonna take practice to get right 🙃
Plz tell me that there are no clone commandos...
Not currently. But there is a certain ARC Trooper waiting to be painted
Phew... if there would be commandos my wallet would cry xD
xD
If youd like the makers name they are Darkfire Designs and have licenesed sellers on etsy. And purchasable STLs I believe
I dont have a 3d printer
Me neither xD
Etsy is mostly too expensive for me cuz shipping costs are equal to product price
Yh sometimes they are bitch like that
For me always.. Mostly things i like are coming from australia... and i'm living in germany... sorry but i'm not willing to pay 40 bux for e.g. a dice set of 12 dices plus additional 40 bux shipment and then there is still no retaxing included...
I have a seller faved who sells from portugal and is shipping free. At least to here in the UK idk if thats helpful or not
UK isn't EU anymore so from portugal to germany is a good thing but anything else is meh
The lieutenant and medic are dope
Also warning. Uhhhhh army painter speed paint doesn't react well with microsol
Barely touching it caused the speed paint to rip to the primer layer. Had to quickly go over it with a touch of the speed paint mix I use. But yeah warning
try hitting where you want the transfer with a layer of matte or gloss before you use the microsol then come back over with matte to dull it down.
It wasn't the spot where I wanted it was it. But it was easy to clean up
Thanks though :^)

