#40k-minis-and-armies
1 messages · Page 25 of 1
That. Look up some minis or pictures of the thing you want to get done and analyze it. What color is the shadow, where are the highlights placed, what is the "texture". Then try to replicate that on your mini.
Like this, I took the idea for only the armour armour being yellow from a model i’d seen online
Nice
I’m looking some of them up right now
Well I wanted to keep most of my mechanicus army the same but I wanted to do purple as oppose to red, mainly a personal preference for them
I was told yesterday that as long as they’re all the same colors you can still use them but they don’t have to be what’s on the box
That would work, if you’re going to try that I’d just start with a simple skitarii just in case it doesn’t work
Gotcha, I bought the skiitari too but I’m just putting the robots together first
You don’t want to paint up something like one of the kastelans then decide that it doesn’t work. Saves you plenty of frustration 😅
I believe it lol
Also, since you are painting an army, focus your efforts in the centerpieces.
I only have a purple layer paint too right now as oppose to a base
Layer/base generaly do not matter. They behave pretty much the same.
Good to know
If you dip your brush in some water first before putting it in the paint, it will make the paint thinner. Meaning you’ll probably need to put a layer or two extra on but makes it much smoother
Otherwise you can sometime end up with brush marks (not always)
Gotcha, that’s another problem I’ve been having too
Either I thin down the paint too much or not enough
Well too thin is still useable, but if that does happen just give the brush a quick wipe on a piece of tissue and try again
I generaly go with 1:1 water/paint ratio. But every paint is different and may need more/less. Test the paint on your fingernail to see how it behaves and dilute accordingly.
Got it
Or you can tell by the taste
Delicious lmao
(Don’t actually try that)
Nahhhh I wont
Washes are fair game however
Always like to keep a few bottles of Nuln oil in case I get a bit peckish
There’s no wrong way to paint really
As long as you don’t drop it in the paint pot you’ll be alright
Yea
First model vs latest model
First model to be fully completed with base and transfers, started about one and a half weeks ago
Looking great
What box did you get that plasma pistol from?
It's in the Recruit Edition
Next will be these 2 bad boys, Iron Father Feirros and the Lieutenant from the Recruit Edition
I have been tempted to get Feirros, slap on a different helmet and call him my forge lord/siege breaker for HH
I can see that work
Ive actually just been getting him bc im an Iron Hands simp and his design looks great
But apparently he's decent on tabletop too
No clue how he performs, I just know he’s quite popular to make master of the forge tech marines
Those are all amazing
Time to paint these darktide minis
Mine are still in the mail, I ended up just getting some pre-printed from etsy that a friend reccomended.
yeah thats what i got too, but i only got these 3 instead of the whole kit
so basically this is a modified horus heresy crusade detachment. i'm ok with this
mark III power armor my beloved
That's actually Mark VI with a Mark III head and shoulder
This actually makes it really easy to stack bloodthirsters
Would it be heresy to paint clone troopers in the scheme of iron warriors?
Your dudes. If you think it's fun, go for it.
Technically Iron Warriors are already heresy
Lmao true
Imperial Fist model I did with the new beakie marine kit
Now I’m not the best painter, but I think these came out pretty well:
You think you Just can post you fig after my BEAUTIFULL WALL OF APOCALYPSE


They're looking pretty good, I want to grab a knight one day
I put together an entire Knightly House of four, plus an entire houseguard army using Van Saar and Mechanicus Skitarii bits. With those Ambull filling the role of my Ogryn
I was regularly having to face off against a deathwatch player who liked using me as a punching bag or training dummy for tournaments, whereas I just played to have fun with.
Exactly, I prefer to have a narrative element over a competitive list
I mean, I play Iron Warriors, arguably one of the least competitive legions
I've even made part of a story for my warsmith character
I like those last two helmets, are they 3D prints? The fly head looks especially filthy
That last head is from a venerable dread I think
ANOTHER ONE
theyre from the plague marine set
Honestly my Guard forces are still my bread and butter. 1st Erusian Guard, Steel Legion doctrine
thats a big block of butter then
Two super heavy tanks, six Stygian Destroyers, 1 Chimera, 8 Guard squads
And two Valkyrie
Holy shit moon knight
Nothing makes me happier than going into a game that’s just for fun, and watching three knights take the field
Both come with the regular Plague Marines kit actually
Anything looks better with paint than without - and that knight is looking pretty good!
Anyone remember the game Inquisitor from back in the days with the 54mm miniatures? I played it a lot with some friends back when and I made a Nurgle cultist warband. Considering the setting Darktide is set in I thought some of you would appreciate there old guys. Fatshark: I'm a Stockhom resident and if you want to use some of them for inspiration just let me know and I'll drop by the office. 🙂
I also got a squad of guardsmen. Two marines and lots of other figures.
Pew pew
ooh glowy bits
Shadowsword/Banesword
are those third party?
yes and yes
codex cover is uncovered by logo (if I remember correctly) and hte box is only out for a little bit
Got one of my Knight Armigers from the Christmas box assembled. Space Marine for scale.
Biggest project I have completed. Took nearly a month from starting assembly to fully painted.
The molten bases are dope.
Thanks!
Did you make that or order it?
The breach looks sick
Mordian Super Heavy Detachment sadly my las cannons broke on the shadow sword while moving
Hey anyone have the new rough rider minis?
I've been thinking about kit bashing them with admech
But I wanna hear for some that has built them before getting any
Are they out already?
I couldn't find them
You can make your own. I used victorian miniatures for lances and anvil industries for curiasses and helmets to make a napoleonic style Lancer
I mean the horse
I mean I know they are in the new guard codex
I dont exist now but its bigger he have base like primaris motor bike
No its order lol i dont have this capacity
Its my friends he create that for this space marine but space marine suck so i take this big wall for my guard 
I think i add turret or canon on tower
Like this
yoooo its the dow1 heavy bolter turret
Hot
I know what chapter ill paint my sphess marins into
salies?
Blood ravens
the magpies
good choice
And then proceeds to equip them with shit from other chapters
im still salty that the canotical ending of dow 1 is spess maween victory
fucking magpies
Now i know
I get rhino
Paint it partially blood ravens camo
Then small area of ultramarine blue with their icon
or or or or hear me out
paint most of it red
but where the logo would be be half a um and the other half red
they were almost done with repainting it
Give captain lysanders thunder hammer
It's a cute wall, but needs antigrav hover engines for my Fire Warriors to be really interested
has a severe lack of heavy bolter, hydra, and earthshaker emplacements
and cant fit a baneblade
and you said it was for guard
I've actually been considering just painting some blood ravens where like, you can see other chapters symbols and stuff all over their wargear
Because klepto marines
Like the Marines Malevolent
Like, "That's an Ultramarines shoulderpad badly painted red
(To some degree the Charcaradons during Badab War)
"Murderfang? never heard of him, have you seen our new power claw dread"
And this dark angel sword? Ive had it for years!
No ko thats not grey knight sigil on land raider
bjorn's dreadnought casually painted red
Its our reserve companys icon
This could be fun actually
just say the blood ravens are the new deathwatch
stop asking questions inquisitor
yes we are now deathwatch. yes all those random marines are from different chapters
no thats not a clone of fulgrym made by fabius bile. thats our new chapter master
Sanguine guard? Never heard of those. Did you meet our honour guard?
I need to stop going to general chat and expecting an engaging discussion when I only get "No it's bad*
I will now exist mainly in the fun miniatures channel
muting general on launch day was the best decision
It really is full of people who have maxed one class and assume they know everything, I wouldn't mind it if they actually had played and experienced all the classes levelling (Not just saying that because I've sunk too many hours in and have 4/4 at 30 and 3/4 at close to BiS gear excluding blessings)
yeah lots of self declared experts in there with no sway in their opinions
although can't be bothered with them besides some times saying something silly in between their arguments
I only have 3500+ in VT2 and 350+ in DT, I'm a novice
Yeah the tide games are kinda my jam
I maxed them all in Pre order xD
I had time off work and just, went ham
same, but VT didn't really snap for me before WoM dropped. Owned it since release but didn't play it for a couple years for some reason
I can't hear you over the sound of how good chaos wastes js
oh that's true
I'm eagerly hoping we get that in DT
by WoM I didn't mean that I'd play weaves
it was shit
just didn't play the game at all
Yeah weaves suck super hard
If weaves didnt require leveling up again id try them
I mean if DT gets chaos wastes, don't think I need another 40k shooter?
Or its done with disguise of deepest underhive
Yeah the whole, weaves only weapons are the main issue I have with them, the actual weaves aren't amazing but they're not bad
I would actually like the DT chaos wastes to be like "OH SHIT ITS A SPACE HULK"
"THAT SEEMS FUCKY WUCKY BETTER INVESTIGATE"
That'd be sweet
hand reveal
Bet
something gone wrong....
Yes, seems you're missing the rest of the flamer
Hand reveal
Almost finished
Straight up that wash
Don't worry it's empty ;-; I need more, hopefully the hobby stores open Christmas 🥴

Good fucking luck finding any
It's alright I'll just use Vallejo sepia if all else fails 🥴🥴🥴
you can make it pretty easy too
genuine sepia is super easy to make too
you just need to get a cuttlefish and squeeze its ink sack a bunch
😂😂😂
How hard is it too learn airbrushing?
Hello all heretic
I finished putting the robots together
Easy for base coating, hard for high detail, but its only considered hard because you need to build up muscle memory for it
Them plasmas Bright
Best robots
eviscerators go brrrrr
Yes
Damn they're... exposed
The upper part is shit :c
They're looking good
https://media.discordapp.net/attachments/909465022839791616/1055873135485927595/IMG_20221223_163708.jpg
https://cdn.discordapp.com/attachments/909465022839791616/1055873135804698695/IMG_20221223_163728.jpg
https://cdn.discordapp.com/attachments/909465022839791616/1055873136060547162/IMG_20221223_163743.jpg
https://cdn.discordapp.com/attachments/909465022839791616/1055873136442220625/IMG_20221223_163751.jpg
Trying out a nice silver primer, very noice
Lord solar proxy, Sandbag is just there to prop it up for the picture. And a little shovel
Thanks
Tossed some magnets on my wife’s eldar, xenos scum 
Tried priming for the first time today. I see some spots are more grey than the wraithbone prime, so they probably weren’t hit good enough. Should I do another coating, or does it look okay?
I also mightve overdone it, like I said first time, new to all things crafty lol
Looks good to me for a primer coat.
Just finished assembling my Breacher Team. Now just gotta get some sand on the bases and prime up for painting
Primer seems fine, all primer is, is a layer of paint that paint sticks to better than the plastic
That sentence made sense shut up
I asked Kairos Fateweaver if that made sense and he said "No" "Yes"
We should always never listen to that guygirl
if there are any areas not coated as well should i do another coating? hard to get a good picture of it with my lighting but there are some almost plastic areas
He she is always accurate wrong
I mean, you can if you want, nothing wrong with it, but be careful not to lose detail with thick primer
Just do like, a quick sshhhttzzzzppp
My favorite unit
I tend to do my first primer coat held in my hand so I can tilt and get into obscured areas, but yeah like above you don't wanna get too close/thick and lose detail
(look I'm going slightly insane right now but I'm not wrong)
Blightlords are pretty great
But I want to make sure I can paint well enough before I tackle morty
You probably wanna paint Morty in sub assemblies
He's got a lot of crap that gets covered by other crap
Yea unfortunately I didn’t think about it until the wings were ready to come on
The wings and the other nurglings I have off but
I mean, you can take it apart fairly easily
That at least seems manageable to paint as is
Just, firm not hard
Or there's stuff that you can get that like weakens glue
I'd personally have left the arms off
Few tricky bits with the hanging parts, but nothing you can't work around
But that doesn't seem too bad
I can't even draw a stick figure so itll be an experience. I think I'll at least try to paint the terminators and some regular plague marines before I attempt anything with him anyways
Death guard are good for first tries
Because if you don't thin paint enough and it looks all goopy
With models like that as long as you paint from deeper spots outwards, you're not likely to ruin anything you've already done.
Free detailing
The most likely spots you'll accidentally get paint on the model you don't want is the chains, so the chains are an exception to that rule. It's easier to paint all around the chain parts first, then do the underneath without getting any on the chain
Mortarion is a very popular model though, so you'll be able to find plenty of paint tutorials to watch for it
What colors do people typically use for blood? I know the obvious answer is red but I know there’s different shades
There's a citadel technical "Blood for the Blood God" that is pretty great for blood
so, i had two dumb ideas for miniatures/sets of minis
-Armiger Freeblade with a huge Ion Shield and Power Sword held by gauntlets
-Astra Militarum army, but they're all made of LEGO
which sounds worse?
https://www.youtube.com/watch?v=1TRBq7GVnJM
You can check this vid out, shows how it looks pretty well
In this video, Duncan will demonstrate the amazing new Citadel Technical paint, Blood for the Blood God, to give your miniatures a gruesome, gory and bloody yet fantastic finish.
I’ll check it out since I plan on ordering some more paints soon, thanks
I'm tempted to say the first one is worse, just coz I really wanna see your LEGO Guard haha
That looks amazing
also i asked a family member to get me a Questoris Knight for Christmas as well as a few modifications, but they only got the base one, so imma just work with that
maybe i can try making it akin to my knight in that one mobile game?
(which i installed a cracked version with infinite resources because i just wanted to make a cool looking knight)
My new discovered a box in very good condition of a squad of arbites

the figurines not built and in perfect condition 🗿

Recent finishes
That's from waaaay back when commissars could have actual boltguns
Don't quote me on this but I'm pretty sure they're limited to bolt pistols now? I don't really play guard
NOOOOO
is can use laser pistol. Plasma pistol, hot shot pistol , bolter pistol
both i guess. made it from a few models
its made from gamesworkshop models yes. celestine and i dont remember the name of the other main one and then some bits i had
MUST BE OFFICIAL GW KIT ASSEMBLED EXACTLY AS THE INSTRUCTIONS SAY OR YOU'RE NOT ALLOWED TO PLAY WITH US IN OUR CLUB HOUSE
damn, you will really hate my marine army XD
I was pretending to be a TO
I genuinely 3d print everything
I have genuinely been spoken to like that by TOs before
I just wanted to use my cool MK3 iron warriors I made
THEY HAVE SATURNINE TERMIES WITH THE SHOULDERS
Yeah I'm salty
What ?
I paraphrased a TO as a joke, I don't think it landed
I DONT COMPLY LOOK AT MY KITBASH
No is on rule you can use EVERY pistol guard and one hand weapon like chainsow power sword power axe etc
Yknow what, never mind I'll stop making jokes
NEVER JOKE WHIT COMMISSAR
No keep doing it
Just I think people assumed I was being serious
I knew you werent, only GW and dumbass TOs talk like that
To be fair, I am pretty wiped, just got off a boat
Because, sure I wanna go to Shetland
Why not
She lied
what kind of boat?
I don't know one with an engine and goes in the water
ahh, so a floating one then
Yep
Good because the other type is sinking
Definitely floated
I mean, yeah I actually can't argue with that
I don't want to say you're right but you aren't wrong
it just will never surface again
then its a wheelless carriage
It carries fish and doesnt have wheels
So it's a bucket
earth is a wet rock
I got a starter set and some stuff for painting after I finish with these where’s a good place to find more
This is the way
Sanguinius has been sitting on my shelf for two years, I should give him a pop later today tbh
big mood
wip
literally im painting it as we speak
How’s he looking? I’m pretty proud of the face, bones on the helmet and the cloth that has the agrax earthshade
I hate the base so badly though, gotta cover it up
Im doing 10 more btw
that mug be looking heretical
if its not a golden skull, its heretical though
My Earth Caste engineers appear to be developing a new prototype weapon
Should be ready for deployment in a few tau'cyrs
My first mini
The chadest faction
Two squads ready for the table
hand reveal
Oh nice, hopefully ill paint some gretchin today too
I made these a while ago
I miss my old school Tau stealth suits.
Waaagh! Da Goff Rocker iz turnin' it up to 11 and smashin' yer Silent Night. https://bit.ly/3DZHNf8
Listen on Spotify, Apple Music and more: https://lnk.to/JH-EreWeGo
Don't forget to like, share and subscribe and to ring the bell to make sure you keep up to date with all our latest videos!
Lets sing
Yes
Got a new phone. Still no paints or proper hobby tools, but now Djarqa looks better on camera.
Been a couple years since i've painted.
Thanks, yours are great
WoOo
Are there only the patrol kits and individual kits for tyranids I’m looking for collecting not an army
I think most of the "Start Collecting" line are slowly being phased out for Combat Patrol
Yes
At least with a quick Google I could find a few for sale in local stores. Doesn't seem too rare for now.
Couldn’t find a tyranid patrol set at my local store should I try online?
Online is probably your best bet.
Finished putting sand on all my infantry bases. Pretty sure I got a little high off all the superglue fumes 🤪
Tau?
Yeahhh! FOR THE GREATER GOOD!

Didn't want to paint a bunch of black, so I did something a little different
thatss uepr cool!
The horde will grow this christmas
i do, just have a lot that i have to paint
First paint the baneblade
Is the most important things of thé WORLD
O ye
Incorrect, titans are
Titans > baneblade
Void shield > shadow sword
Two shoot of shadow sword > everything of the univers
Multiple void shield > two shadow swords
I finally finished putting all my minis together I bought recently
Gotta prime them soon, but I still don’t feel confident enough to paint so I’ll keep practicing on my orks
slap chop em
guides for it are on YT. very fast paint method that produces superb results.
just finished painting my first ever mini, what y'all think?
you can get really good results while managing 15min/model
Seems very simple
it is
I can now run a proper 2k list without spamming Legionaries
dude i love the tracer round every 5th cartridge on the belts
Oh that's such a cool detail
I was stoked to see some Steel Legion rep in the game, I’ve been running some Armageddon-adjacent Guard as my Kill Team for a little while now.
its just multitoned dry brushing with a fancy name from a youtuber
Ahhhhh alright
multitoned dry brush then you ignore hobby paint mentality and actually use transparent paints
Ive been doing this for a decade and everyone keeps telling me "this is the wrong way to do things"... Then a youtuber does it and its correct
Horus Heresy Lion El Johnson model
Np, it's a really cool model
Nothing better then drinking too much and painting models....might seshout some darktide 😩
Got my hands on a majorkill krork, was a lot of fun to paint, stompa as well. Love painting orks.
Looks sick! Cant wait for mine to arrive
All sand bases now primed, I can finally start painting them
Did all this during a loading screen.
What game took that long to load?
Darktide
Thanks. "slapchop" undercoat and contrasts with some layering up. Super quick. Im actually at about 2 in a day.
Fun pic of ghaz against my mates guard, was not a good day for them.
Like a really not good day.
Anyone got any advice for starting a collection?
You got a faction in mind?
Want start my mini collection sometime next year and nl idea where to start
I do like the Astra militarum
The everyday Joe military fighting super OP opponents
That's a good point, guard are hardy lads considering the world they live in.
I only know of like 2 armys(?) Of them the one in the jungle and the death korp krige
I suggest picking up a small box of troops and see if you'd like putting together and painting many of them afterwards
^
Fair fair
Tried many years ago but it was terrible timing. First bought the space wolves around 2014 but I got shipped out to deployment
Also if you've got a hobby shop near you, its easy to find other people that can help choose things to start with as well. Teach you the game and other hobby stuff. 40k has a good community for it.
But yeah what Han said, I started with just a box of Ork boyz and went from there myself.
Nice. Currently in Layton/clearfield utah and been watching battle reports and reading the darktide game.
Long time friend pushed me to actually start an army lol
there's a lot of vocal hate for 40k as a game online, but it's honestly nowhere near as bad as you'll read. Im super new and having a blast.
For a low buy-in: Krieg Kill Team.
Yeah you get good value for the krieg team, cool models too.
I'm researching more militarum sub armies other than the jungle one and krieg
I started with Kill Team. Once I bought most of the teams and played many games, I started to look at 40k and got hooked
I've only been doing the tabletop for about a year, tried to start when I was younger but nobody was into it where I lived. Had chaos back then but I never really grew attached to them.
WW1 or Vietnam astras lol
Steel Legion are a fun Astra regiment.
Aren't they the ones who say "iron with iron without" or something like that?
keep in mind, they're your plastic army and you can paint them however you want.
^
Omfg.... thank you
You can choose to follow a scheme or go nuts, theres no real rules on paint style.
Nah, like I've got friends that paint their orks however but run them under Bad Moons klan rules. It's perfectly fine to be creative.
I dont care about lore, so I create my own faction fashion and run with whatever factions fit my play style
I play goffs because I like rushing and brawling.
I... am... in love now
My CSM are Red Corsairs cause I kinda like how they just hang out trolling the Imperium
Red Corsairs...that's Huron's crew isn't it?
yup. Dont even run him cause I have no bikers. But some of the strats are super piratey to use
Huron would make a better warmaster.
Abby is kind of a punk anyways, from what Ive read.
Still have an old Abby steelcast model somewhere.
Wow found the Chem dogs
I like the memery of Alpha Legion though. But you have to be super sure of what you're doing to pull of the strats
Thugs of the God emperors? Hell yeah!
I'll just paint them to be akin to Chem dogs but I'll find some current book to use the numbers
If that makes sense
Yo I saw someone doing conversions of militarum models into the cultists from darktide, that was cool as hell.
the problem Ive run into with being super new (6 months in) is that everything is interesting and looks fun.
I picked up the Sisters battle force and can't wait to make it my main army. They're going to be the Sisters of Sigmar. They believe the Emperor is Sigmar reborn.
That way I can pick up some Stormcast for kitbashing and conversions
That’s actually a cool idea
I love hearing the lore of homebrew armies
Saw a YouTube video of someone turning their sisters into a punk rock version with bikes and flamers
Any books or codexes you guys recommend for a starting army?
First time ever painting anything in my life. Any ridicules to help me improve? I already made the rust less blaring and better blended but besides that
I also know i need to make the contrast green i used more smooth
Awesome sword
MERRY CHRISTMAS PRAISE THE EMPEROR!!!
One of the tips I read a while ago for beginning mini painters is to paint within the lines before trying to paint outside the lines. Try to get the armor panels and trim to be distinct from one another, focus on brush control.
man every time i see another chaos marine it makes me want to do chaos marines more
like tacticool iron warriors in a more blackish scheme.
or some khorne berserkers
and also grots
is-IS THAT A XENOS?!?
No sir they are a simple skitarii making their way in the world
Don't leave the brush soaking in liquid, it kills the brush. Also leave them to dry flat.
I also want to do that but the CSM models I feel don’t fit the aesthetic of the iron warriors so I’ll probably do a primaris marine army painted like the iron warriors using the imperial fist doctrine
This is one of the creepiest things I've seen in a while
and I fucking love it
Any other ways to paint chaos space marines to look khorne-y?
I need someone to take a pic of their basilisk if they have one
I need fire support later tonight 😫
3d printa
Me no got
Expensive
I think it’d be funnier to do what I said and upset the imperial fist fans
After all iron warriors are superior to imperial fists
A tip for a cheaper painting experience - when highlighting, honestly just mix the base colour with white. Looks good on most things.
That is just color theory. And not always white. For example greens are better lightened with yellows. So are most reds, unless you want to make it pink.
Ignoring all the other mistakes on my first paint attempt I posted last night, do you think just a base death guard green would look better than the contrasted green? It seems really pooly in areas and light in the others. I did forget to mix with a medium so I’m not sure if that would make it look as smooth as a base would or if the base would just be cleaner
Contrast paints are supposed to work that way. They pool and created darker tones the receses and only tone the white primer on the high points. As a result, it will generaly look splotchy. Used that way, they are supposed to give you mediocre looking miniature quickly. You trade off control and precision for speed and convenience. Standard paints will generaly give you more solid colors (may need more coats), but you need to place the shadows and highlights yourself.
That being said, yours does look weirdly splotchy, even for contrast paints. You are supposed to kinda move the paint where you want it, if it pools in weird places.
contrast paints are transparent, the more layers you apply the darker it gets, so if the initial coat is splotchy, it will always be splotchy
transparent paint is an insanely useful tool when used correctly, the problem is there is a major learning curve with them, hence why lazy painting methods exist for contrast paints
its mainly just undercoating
its sort of color theory. color mixing is around less than 1% color theory as weird than it sounds, the majority of color theory is a study of physics and chemistry(IE mixing red and green pigments to make a blue as thats highly unconventional and has to do with human color perception and colors that arent real). Even the entry level color theory books will be primarily about the physics of light. Weirdly enough, white is only part of the high-low chroma and not really much else.
Its honestly one of the more interesting things I had to study in school.
the end result is just knowing how to mix colors, its really bizarre
Yea I moved it as best as I could but I think I might’ve had too much on brush OR because I didn’t mix with contrast medium. Might just stick with a base paint for now seeing as I’m looking for a cleaner look
adding in contrast medium will just dilute the color and cause the same issue
What is a kill team in regards to table top?
Is it a faster version of the normal game?
No, its a fair bit different in a lot of ways.
wargear is a major thing in killteam while its lesser in the main one, plus a lot of the rules are different
for the most part the models work in 40k, i dont play kill team so I cant 100% say they do, just know a lot do
got some votann friends for christmas
painting them like some familiar faces....

The grandfather is most pleased
Open to suggestions for which configuration I should make
fuck it, stolt gun.
All the above
Melta gun
I'm torn between melta gun or magnetizing all three
What's magnetizing exactly?
I've heard of it a few times but I dont know what it is
exactly as the name sounds iirc
fitting magnets to allow things like rotation or hotswapping
some people do it to their knights for articulation, for example
others to tanks for barrel rotation for posing
Trying to decide for a wash/shade - nuln oil comes to mind, perhaps
Nuln oil does not really work on bright colors. Use some brown/orange wash instead.
Sweatshirts and Warhammer for Christmas
You can make your own "wash". Just dilute the paint a lot. It will work similarly.
If you do not have Agrax earthshade, just take some brown paint and dilute it about 4-5:1 with water. Test it on your fingernail and if it is translucent, you are golden. Carefully apply that to the recesses.
Oh I have agrax I’m stupid
It’s not one of my taller pots so I missed it
Oh yeah Agrax really makes that look better
grubby-s up the armour perfectly
how the fuck do i paint kroot
my brain is having hard time understanding this shit -.-'
Just opened my first lot of paint, someone tell me what this is for?
Mostly to remove the mold lines on your minis usually if I'm not mistaken
For scraping of mould lines. Not an amazing tool but safer than using a knife and GW probably put them in there so kids don’t hurt themselves and parents sue GW.
I think its pretty nifty with practice
Nuln oil looks better on metallics. Nuln oil gloss works ok. I used a 50/50 mix on my ravens.
A trick I've seen with Nuln oil if you just want to get it in the panel lines without dirtying the panels. Use a brush with just water to fill the cracks with water, then load up with nuln and touch the tip of your brush to the water line. The Nuln then flows along the line with the magic of osmosis/fluid dynamics giving you a nice detailed panel like but keeping the panel itself clean
Of which I will find a photo eventually.
I mean i kinda wanna go for a dirtier look
making 4 of my 10 Hearthkyn warriors the deep rock dwarves, and Driller i'm expecting to be a grimy dirty armoured lad
god i wish I could paint that well
Otherwise yeah, agrax is your go to for grimy detail
I don't usually like marines for some reason but these are pretty fancy
Yeah agrax is great for a dirty look. I just don’t love it on metal which should have a slight dark oil look.
Yeah, nuln great for metal
I don’t either. 😂It was a little speed paint project. Grab all the cheap easy to build units and paint them up over a week for a display in by hobby room.
A very easy paint scheme.
Nice. It's something about the huge shoulders that normally gets me. A bit too "Blood Bowl" for my tastes, but you did a great job
I say that, but then picked T'au who are all about having one huge shoulder plate, so don't look for consistent internal logic in my tastes 😂
🙏
Haha
There is an chance that I gonna try to make an simple imperial titan with my mom
Perhaps an Chaos titan
Im more of an Chaos fan
What mini is that
Its a larger scale mini, the Wrath by Black Crow minis, and I just noticed now when I uploaded the photos it cropped them. That's annoying
I got clever with some effects paints and made the base myself. Black crow makes some great stuff. I did another mini by them as my lock down project a couple of years back.
Ty it looks cool af
Fireblade assembled. I really like this model, looks great
Thinking of painting novokh necrons, can somebody give me a list of the paints I need?
I put down some astrogranite on an ork base then put some corax white like a snow affect, dunno how well my camera picked it up
This GWs like apparent recommendation for it
Those would problaly work with highlights to be fair
I have same colour scheme except instead of bronze I use nuln oil I also use evil sun's scarlet as a highlighter. The gree though I would add moot as well
ill post the highlights too
To replicate the thing in the picture, you're gonna need red, orange, dark and light green, bright and dark silver, copper, obviously black and white and probably black and brown wash. Does not have to be citadel paints.
Try learning how to identify colors used in the picture, rather than relying on guides, that are not always what is actualy used to get the results in the pictures. It will open other paints brands to you as well as an added bonus.
It might work for sure - I would personally use some additional highlights
Shadowvaults killteam?
The reason I don't use warpstone is because it didn't exist when I first started and I'm not repainting nearly 5k worth of suff
This is exactly ma point proven. 🙂 The red highlights clearly go to pure orange, greens occasionaly go up to pure white. And there is a huge difference between the gun silver and body silver, yet the guide for them is the same.
Did my Kasrkin like this (basing was WIP when I took the picture)
Nah cryptek that came in one if multi boxes
Thought he only came with the shadowvaults set!
Maybe now but this is a model I've had for a few years 😅
Impressive work though
Thank you!
No that is more the iron warriors space marine legion who. Say that and they are part of the amry of chaos not really imperial guard
Iron within Iron without brother
"We fight the long war, not through vain notions of duty and honour, but through a far purer purpose: hatred. At the height of our glory we were betrayed and cast out by our kin. Guilliman, Dorn, Sanguinius - these are names I curse. Horus, Perturabo, Angron - these are names I revere, names I would follow to the very end. It is this hatred that...
Best tribute
Same for the night lords
I am really considering instead of starting another 2k army printing just going up to 4k of IW
With midnight messiah
Print more and more vindicators
Nice
Because that new detachment means I can just run terminator's and tanks
I like the night lords and iron warriors lore
I see
Lol
But he is basically a victim of his own vissions he basically he foresaw the horus heresy when he met horus for the first time
It just makes him kind of uninteresting to me, because it's literally his entire personality
He even beged his brother sanguinius to. Kill him to. Be free from his tortured mind
Kinda proving my point
Yea
I have been summoned
I was wondering when you would notice
Working on this, I decided to get rid of the gunners seat (To me it looks stupid). But I now want/need to have an artillery lanyard, Does Anyone know where I should attach one?
What site is this ma brotha
Citadel colour phone app
I both love and hate that app. Makes keeping inventory of what you have so easy. While also giving easy access to standard color schemes. But at the same time it allows wishlisting and anytime you visit a shop that stocks citadel colors, you simply go broke...
Seems kinda fitting for heretic brain power
Really any 40k character brain power
/30k
The only characters that actually made a good decision is those who don’t want to associate with the imperium or chaos lmao
Where are my "Amish Marine Legion"?!
"Fuck Horus and fuck daddy E, lets go farm some potatoes and shit with efficiency never seen in the galactic history!"
Caliban lmao
Except add monster hunter to it
Just imagine how good farmers space marines would make... "No need for tractor, we have Steve! He once shoveled a field for 3 months non stop!"
A hand full of fallen are literally doing that and it’s great
I used to like it. Then I realized they often straight up lie in their recipes. So I learned how to recognize the paints (or at least close proximatons) by myself.
Aint battleforces basically just bulk buy discount in a box?
X% cheaper than getting the figs in their own boxes?
They have some of the best value for money out of 40k sets, but quite a few of them also include a big centerpiece, which may not be ideal for a beginner.
I got a bunch of models for Christmas and zoned out to building my goreblade warbands
So any tips for painting flesh? And maybe blood splatters?
Flesh is easy, you start off with a mix of burnt umber and orange, then slowly add in white, mix a little yellow ochre in for more variances like asian, etc. ultramarine violet is great for shading too. blood is tricky, for the easiest just get PR177 anthraquinone red or PR264 Diketopyrollopyrolle rubine(sometimes called synthetic carmine) and just believe it looks like blood.
You can also do the PBr25 benzimidazolone brown mix, but thats hard to find
Citadel have “blood for the blood god” in the technical range that’s pretty good too.
Blood for the blood god also makes for a good red lens glow
blood for the blood god is also just anthraquinone red in a gloss medium for an insanely huge mark up
Okay sick
I'll update y'all as I finish them
Oh and I also got all my ultramarines done as well
Just gotta base them
i must say
i am heavily disappointed in the lack of Bayonets available in the Cadia Stands Boxset
Contemptor that I recently painted
Very nice
New white scar box looking dope
Finally completed my first miniature. Not perfect by any means but it's practice in the making also apologies for the camera quality
I like the new field gun, I really do. But I hate that for 20 years GW and BL pretended there were no field pieces other than Basilisks. But suddenly they will pretend like these smaller field pieces have always been a part of the lore.
Yeah
I want the minis and big emphasis on maybe play tabletop, do the minis become obsolete will I have to buy new ones or something like that?
is the ig 9th edition out yet or is that only with pre ordering that one box
very new and wanted to get their codex and apparently the 9th is out but i can’t figure out where to buy it and don’t want to buy the old one just for the new one to come out immediately
Not out yet from what I can see. You can tell by the logo. 9th ed stuff has the red white and blue logo
Older will be this
i see, thank you
there was just a bunch of reviews on it that i saw
i guess pre-release
I was actually quite confused when I was checking out the Guard on the 40k site, since they don't seem to have any standard "infantry squad" boxes, which to me seems like it should be the bread and butter of the Guard. All they have is special units, like Cadian Shock Troops (with Cadia Stands box) or Catachan Jungle Fighters, or if you look to FW line then they have the Krieg squad. But no regular guardsman infantry box.
yeah it was confusing for me too lol
Let's talk about the new Space Marine Chapter Battleforces announced by GW today! Contents reveal inbound...
WHC Article here: https://www.warhammer-community.com/2022/12/26/start-your-new-year-new-army-project-with-four-more-space-marine-battleforces/
-- Patreon Page --
https://www.patreon.com/auspex
-- SubscribeStar --
https://www.subscrib...
White scars had me laughing
Bikes
Just bikes
Your imagination is far too broad
You need to think small when it comes to the white scars
"Can i have bike too father?"
"No you are too fat"
r o g a l
The captain will need to jog after them
I thought Kor’sarro Khan had decent movement for on foot
I dont know
I like the Imperial Fist box because of all the gravis armor
I really like the gravis
Wonder why you cant mount him on bike
I want blood raven box with multiple psykers
Ultramarine box seemed really unintresting
Matt ward surely will rechoice
Hey, that's a good looking first mini
Im still torn on what i wanna paint my space marines as
I like scars bikes, i like iron hands as chapter but like blood raven colour scheme
For your entertainment, here are my very first miniatures ever, painted over 14 or so years ago
Best part is the half paint-covered decal and the "freehand" one
Different times
Howdo you make decals?
You use them from the transfer sheet, if you have one
Are they like tiny stickers?
basically
speaking of what solution do you need to apply them or is it simply water?
Water is mostly enough, just keep them soaked a bit. If you're super serious, there's some sort of decal solution
Nowadays I just use water and cover it with one or two layers of varnish of choice after it's dry (satin, mostly)
There's also this guid video with helpful tips in the comments. They mention vinegar there, which seems worth a try
In this tutorial Jay teaches you the easiest and best way to apply seamless decals! We have new videos every Monday, Wednesday and Friday! We're streaming Monday-Saturday starting at 9PM CST!! JOIN USSSS! Thanks for watching!
We have a Patreon! Support us here and get more content!:
https://www.patreon.com/eonsofbattle
Discord Server:
https://...
About painting. Is some layer spray mandatory or can you just go straight with normal paint
You mean priming? It's not really neccessary, but if you handle the miniatures around a lot it does help. Goobertown hobbies did an (insane) durability test
Thank you much appreciated
If you have 7 minutes to spare or simply are curious, here's a video on the topic. Great channel btw for learning about the hobby, not just how to paint
Priming plastic minis- Is this necessary or just superstition? Which is more important to protect our minis, primer or varnish? Seven elite squads of grot drop troopers will put this to the test!
More Goobertown!
Patreon https://www.patreon.com/GoobertownHobbies
Instagram https://www.instagram.com/goobertown_hobbies/
Twitter https://twitter.co...
GW recently said that its not necessary, you can use Base Paint immediately on the plastic but you need to carefully build up the thin coats for it to work
Anyone know who would be a good HQ for adeptus mechanicus? I wanna do belisarius but idk actual specifics of him and the rest
Honestly, they are all pretty good, most people I see run the fat guy, cawl, and the marshal if they have alot of skitarii
But they all are pretty good
I was thinking of running a lot of heavy, tank type of shooters and some fast melee units
I know HQs typically try and support what’s around them?? Still new to the gameplay mechanics of it a bit
Primer doesnt help protect the plastic at all or paint at all, I can provide sources for this actually. Lots of them
heat from the hands causes damage too, so the temp of your hands will in fact invalidate all results
Hey guys, just picked this up, starting the journey. Not forming official armies yet. Just saw stuff I liked the appeal of and went for it.
nuns with guns, one of the coolest lol
Painted up my first ogryn. It's also the first time I have painted non-green skin.
That's fire
Very well done!
I really like the weathering on the armor/gun
I'm never painting faces again I don't know how you guys do it
No one likes painting faces xD
+1 on the weathering, the mag on that gun is amazing
Anyone have tips for bases? Or should I just.. pour glue on one and rub dirt in it
Look up some guides for bases that you want to imitate! That's my best tip.
That really depends on what base you want. Glue and dirt definitely works. If you want something more fancy, there are guides all over the internet.
If you happen to have a 3D printer or know someone who has one, there are tons of gorgeous bases out there as well.
Raptors chapter?
Cool thanks
I didn't plan on having it be raptors but the color scheme does kinda match!
Someone gave me a bunch of camo paints and I wanted to try using them, since I'm new to painting minis
I have these, and then 6 citadel paints from the Necron starter set
thank you
thank you
My little exercise in painting skin is going well I think
I have not made the file, but I can't deny the resemblance
Slaanesh?
One of my bfs is into slaanesh. Any tips I can send his way? He's newer than me
Just a lot and lot of glazing.
Ah fun. Lol
can't wait to paint these when i have the tools
Dats a lotta space marines
having that fire coat of primer will make your paint job stay on the miniature long term so there is that, but if you have some kind of aversion to using a spray can for any reason like it is to cold or you just don't like using spray cans there is always the option of using brush on primer
Wish me luck
Black coat, blue layer, gold trim, white insignia, then wash
Right?
I think so
if youre going for an all over wash you might need to revisit blues to make the colour more even after it but yeah that ought to do it
Isnt wash supposed to make it uneven? To add detail?
yeah to all the crevasses but then the flat blue areas might look a bit splotchy, but you can leave it as so to make it look a bit more dirty as well
You want to revisit all the ares after washing anyway. Unless you do targeted washing, the wash will dull the colors down. So you go over the mini again, leaving the wash only where it pooled. And a layer of highlights on top of that.
There is no botch. It's just about how much time and effort you want to sink in.
According to /tg/ i was supposed to get a complimentary mini ? At the shop? I was in a rush for other shopping so I just picked up my package
probably meant the mini of the month? did you visit a GW store or a 3rd party games store
GW shops give out a different free mini each month
and probably asking for space marine or a stormcast as a first timer would work too
GW Rotterdam
Not that I mind
I will be coming back for the Reiver Lieutenant when I finish these 3. The reiver lt. is badass
This is done.
That's what I've done
Making good progress on my Ghostkeel
The next question plaguing me is whether I bother painting this cockpit detail that's mostly just gonna become invisible once the pilot is glued in and the suit is closed up
But if the controls aren't painted then how can he pilot it!?
Argh!
The answer to the question "should I paint this obscure detail noone is ever going to see?" is always "YES!"
Magnetize the cockpit, take off parts to simulate damage, that way people can see the painted inside
once I start painting my dreadnoughts how should I paint them? I have a contemptor and I'm pretty sure a venerable dreadnought. I'll take pics once I get home
What do you mean? Do you have an existing army for them?
It does already have the frontal hatch that opens, but you'll only be able to see those side bits if you tilt the mini sideways and squint with a torch pointing in exactly the right angle. I doubt most people will bother to look that closely haha
I will.
Anyways you want, pick your favorite color and paint it that
This is the sort of angle I mean haha
Now you are just looking for excuses why not to do it. It does not matter noone will ever see it. You will know. And it will bother you and you'll hate it. So do it now, when it's easy so you don't have to do it the hard way later.
Shhh let me drag it out a bit longer before my OCD batters the tattered remains of my willpower down
I said I will. I teach art classes on the side so I will deliberately look for flaws at the tiniest detail
So paint it for extra points from me
An egotistical artist who seeks the impossible perfection
You better be ready for a green contemptor then
If you mix in a tiny bit of red to the green it will darken it down without removing it to and tone too much.
Really? I didn't know that
Or you can do what I do and just buy a pot of every conceivable shade of green you will possibly need
Oh god, does every tank have a paintable interior?
I'll be getting a Devilfish too. Fingers crossed it lets me be lazy haha
I did paint all of the inside bits of my Spartan
The rear hatch opens. I'm doomed!
Oh god, there's a top hatch, both side hatches, and also a separate pilot cockpit that opens. What have I gotten myself into?

Those are some nicely weathered insides
Although the Marine who forgot to close the doors when the sandstorm swept through ought to be reprimanded
I have like 5 vindicators with inside stuff that I printed, all of the insides are probably painted better than the outside and you'll never see the insides because they're superglued shut
Yes.
New idea. Superglue everything shut, learn how to paint a "welded" effect and pretend my Fire Warriors welded it shut with their plasma rifles to defend against a swarm of tyranids.
Or just paint the damn cockpit
I'll paint it haha, I'm just having some fun
For ultimate badassery, toss the outside panel and make a cover from acrylic sheet. 😤
And paint a holographic HUD on the inside of the acrylic too yeah?
Absolutely.
Maybe once I have another 10 years of mini painting under my belt
I'll be lucky if I can get the buttons of the cockpit done cleanly
As I am thinking about it, it does not sound that difficult to do actualy.
The tricky part will be making the actual acrylic piece imo, since it's a curved and specialised shape. My acrylic experience is about good enough to make a rectangular box that closes almost flush 
Unless I get my mate to 3D print something with clear resin
I can't imagine the sanding you'd have to do to get the lines out and make it see through after
It's a cool concept to dream about one day doing
Tau are probably the best faction to do it with. Might work with craftworlds as well.
I think something like that would look badass on Sentinels too
Afaik the "open" models don't actually have glass panels right?
Look like just a cage to protect the pilot while toppled over. Like you might see on buggies and stuff.
Yeah, so I picture like a similar deal, make the cage have all these clear glass panels with cool hud effects on them
That does not really work for me. The sentinels seem to crude for that.
color theory is weird
Although that might be more expensive than the Imperium would spring for the Guard haha
but that costs money
I only do it for my favourite colour though (which happens to be green)
Every other colour I have 2 pots max, usually like a light and dark version. Green I have like 7 different shades
Personaly I find green difficult to mix to the tone I want, so I just have a lot as well. 😅
it'll be very hard with most hobby paints, most hobby paints are hanza yellow and ultramarine blue red shade
I find it hard to get the same shade I mixed once before if I paint across multiple sessions, so if I'm mixing I try to get it all done in one session
its just practice
Especially with flesh tones
Thankfully Tau are blue so I don't need to worry about skin as much 
start with orange, add in burnt umber, add in white.
I use Kislev Flesh, then a contrast over it
I personally dont like the premixed stuff as I like to match my own skin, which doesnt exist as a paint
I usually end up just adding various amounts of flayed one flesh to cadian fleshtone. More for lighter, less for darker
I usually add to those presets some different red, brown or purple tones to add variation
(I'm also not scared of cadmiums so painting flesh is easier for me because of that)
they arent toxic
you wont poison yourself with them
just dont airbrush them
Or else you receive the blessings of Chaos
yes, lung cancer
the particles are small enough to cause it
which btw, if hobby pigments were the "correct size to scale" you wouldnt beable to buy them easily, the "correct size" is highly carcinogenic also wouldnt have any color to it
I mean if you inhale it you'll have issues
Just don't snort cadmium
it's not that hard
but its so much fun
With a little pocket knife and sweats of fear i made my first guy
It has a file, scissors and knife
Nice!
hey, if it worked then it worked
better tools just give easier results, with a few exceptions like the spn120 godhand
Even in death I still serve.
even if you can, just call it battle damage
Hand reveal
😳
Hand reveal
nice dred
Screwed up
Cant file this off anymore
And its preventing a clean fit
I didnt see it
Well, you have learned a valuable lesson of dry fitting your stuff. If you have not glued it yet, you can take it apart and fix it. If you have glued it...well, you're about to get another valuable lesson of filling gaps with greenstuff/miliput
Even then they are better glued. If you have not glued it tho, you can just take it apart.
No need to be. It is pressure fit, but it won't really damage the model to do so.
Or you if you are really scared, you can just go and buy some greenstuff to fill the gap in witrh
its an epoxy putty, there are many on the market, green stuff is just the most rubbery. The cheapest and the one that gets used for fine art sculpting is apoxie sculpt
I typically mix apoxie sculpt with green stuff
10/10 mixture
2 parts kneadite. You knead the two parts together and it forms a putty you can use to fill in the gap. It then hardens and you can proceed. You need some basic sculpting skills to make it work tho.
I just wish you could easily buy 2kg tubs of it easily
its just so expensive for me who can go through 400 grams a day
Fully assembled you cant see it
But it put the fear of god in me
turns out my pocket knife is sharp enough to knife it off
fit is somewhat better now
Proud
Do GW still rebrand and sell Kneadatite at like 10 times cost?
going to the paint store tomorrow for touch ups for the living room, any stuff from that place that would be handy when working on minitatures?
Just use wall paint /s
stir sticks are always useful
Please drill out those flamer barrel holes...
Multi-melta, but yes, they could use a drill
My tip for centering the drillbit is to make a cross marking with a hobby knife, that way the line intersection would be in the center.
...I'm going to claim I was traumatized by the lack of barrel holes and not take responsibility for how bad it was to not notice that.
actually you can, they are chemically identical. not joking
I've never tried lol, I just didn't want to be lit the fuck up like this is reddit
Fun fact, citadel paint is made by a company that only makes automotive and house paints, they just dont use an alkyd resin in them. Also I will totally do a video of my painting a mini with house paint if I need to just to prove a point to the paint elitists in the hobby that they know nothing about paint
shit, i'll make it myself even, I have all the stuff including the alkyd resins, nitrocellulose and polyvinyl alcohol
depends on the country, but things like LA's totally awesome/ biostrip are always good. Grout and spackle are what those texture paints are too, also PVAc glue is always a good thing.
I dont think they do anymore
I have a question, so for 40k, the kill team skirmish game, are you allowed to use normal 40k units?
There's less to pick from most troop choices are a safe bet, what did you have in mind?
My brother might start a necron army
telling myself ill start painting tomorrow
in reality im scared stiff by all the "thin yer paints" models
I been struggling everytime to thin my paints but I still paint anyway
Its not hard, if you want I can convert one of my classes into a video format. Been teaching art for a number of years
a lot of the guides out there really dont go over it well
technically you dont even need to thin your paint, its just easier to do so
try a 1-1 mixture, this is the easiest
I know a lot of the "higher end" painters will suggest something closer to a 5 or 10 water to 1 paint ratio but they work in glazes mostly
but this is super hard to control and not all that beneficial
you also face some serious durability issues
That’s typically how my consistency gets and it makes it really hard to get anything covered
yeah, youre not doing 1 to 3 coats, youre doing closer to 20. I honestly dislike this method of painting
Tabletop store owner gifted me this today when I bought a 40k book there as a small start to my future hobby x3
Got no paint though
Get the 50 dollar paint kit
cant afford that atm thats why future hobby :D
Ahhhhh gotcha
dont buy that paint kit, I think that was a joke
it wasn’t I bought it myself

