dongle with prospector cannot connect more than 2 peripherals

[subtle agate]

I have a dongle setup and it can communicate with 3 peripherals just fine. When I flash the prospector dongle to my dongle, it can only connect 2 peripherals at the same time, the third one never works.

Behavior:

• I first flash the dongle firmware without prospector, all three peripherals work.
• Then I flash the dongle firmware with prospector, all three work.
• Then I unplug the dongle, and plug it back, only 2 peripherals work
• The third peripherals does show up in the batteries indicator.
• When I see logs, the 3rd peripherals does indeed connects to the dongle, it just not showing the input
• When I flash the dongle firmware without the prospector, all three peripherals works.

Please let me know if you need anymore information.
Thank you in advance.

[eternal zinc]

Do you see that CONFIG_ZMK_SPLIT_BLE_CENTRAL_PERIPHERALS is set to 2 instead of 3, when building with the prospector adapter? https://zmk.dev/docs/troubleshooting/building-issues#configuration-setting-issues

I guess not, if it works temporarily

[subtle agate]

I did, the dongle works flawlessly when compiled without the prospector adapter.

[ornate knot]

I did not look deeper but it could have something to do with prospector module replacing the entire split/bluetooth/central.c file
https://github.com/carrefinho/prospector-zmk-module/blob/main/src/split/bluetooth/central.c

[subtle agate]

Thank you, this is probably a bit above my skill level but I'll have a look at this.