young fern
I'm new to the split keyboard and i made a sofle v2 myself using nice!nano with zmk. I flashed the board following the guide on the docs. Now my left side worked and could get connected well to my pc, while the right side didn't connect to the left. I flashed the reset firmware then reflashed the respective firmwares but it still didn't work. I also tried to erase the flash and reflashed the firmware , doesn't help.
Any help would be highly appreciated, thanks in advance!
carmine hemlock
!logging
dim sapphireBOT
carmine hemlock
See if anything useful show up in the logs for the right side?
young fern
See if anything useful show up in the logs for the right side?
Thanks for your reply! I had a problem to get the logs shown up. If I flash the keyboard then it will show that the device cannot be detected. And if I click the reset button, the device can be detected but it shows up nothing in the logs. Do you have any ideas to figure this out?
carmine hemlock
If the firmware is running and you've properly connected to its serial port, you should see something in the logs.
young fern
This is what I got from the logs, could you figure out what is the problem?😭