mystic spear
I purchased the files to make the first Raksa dagger from Solo leveling that Frank made a video on. I have tried printing the guard multiple times, but the points of the guard keep falling at the red circled areas. I've added brims around those points, slowed the print down, added modifiers to slow the print down in just those areas, and nothing seems to be working. Orientation might be the only thing left I can do, but I was worried about the surface finish after removing supports.
versed foxBOT
Hey @mystic spear, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.
warped falcon
im afraid that wont help you its close too 0 contact as first layer plus its going into a high tilted part with a long long time without connecting
the first layer of that model might come down to 3mm²? thats like sneezing and its off
normaly id ask for the stl but since its paid i cant do that but you can toss me the gcode and i might find a way from there @mystic spear
mystic spear
normaly id ask for the stl but since its paid i cant do that but you can toss me...
Yeah that’s what I was afraid of, we just left but I’ll send the gcode to you when we get back later. Thank you for being willing to look at it
warped falcon
might be sleeping then but you can try cutting it into two pieces and glue
mystic spear
might be sleeping then but you can try cutting it into two pieces and glue
True, I thought about trying that too
mystic spear
Let me know if that works for you @warped falcon
willow heart
@mystic spearthat doesn't look like a gcode file. a gcode file is a textfile containing vectors etc. they look like this:
M105
M109 S210
M82 ;absolute extrusion mode
;ELEGOO NEPTUNE 3 Max
M220 S100 ;Set the feed speed to 100%
M221 S100 ;Set the flow rate to 100%
G90
G28 ;home
;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm
G92 E0 ;Reset Extruder
G1 Z0.45 F300
G1 X1.5 Y20 F5000.0 ;Move to start position
G1 Y120.0 F600.0 E15 ;Draw the first line
G1 X0.5 F1000.0 ;Move to side a little
G1 Y20 F600 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G92 E0
G92 E0
G1 F1500 E-1
;LAYER_COUNT:240
;LAYER:0
M107
M204 S500
G0 F6000 X186.159 Y205.46 Z0.2
;TYPE:SKIRT
G1 F1500 E0
G1 F1800 X186.964 Y204.832 E0.04635
G1 X187.745 Y204.499 E0.0849
G1 X188.476 Y204.352 E0.11875
G1 X212.245 Y202.909 E1.19985
G1 X213.058 Y202.889 E1.23677
G1 X213.891 Y202.91 E1.2746
G1 X214.822 Y202.983 E1.317
mystic spear
<@178119897056804864>that doesn't look like a gcode file. a gcode file is a text...
Sorry I exported the plate from Bambu and just took off the extra .3mf they tagged onto the end of the gcode file. I should’ve taken a look at it closer before sending it
