Hey, my CR 10s pro V2 has got a recent problem, it sometimes gives a screeching sound that I'm pretty sure comes from the bed rails. Can I spray WD-40 on there or is it a bad idea?
#✅ - Can I put WD-40 on my printer?
signal perch
brisk stratusBOT
Hey @signal perch, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.
humble stratus
You could use a silicone free lubricant like pb blaster don’t use wd40
And only a little bit
signal perch
Ok, is there any other way I can reduce the noise without the use of lubricant tho?
@humble stratus
humble stratus
You could try cleaning the rails they could have some contaminants
signal perch
I already did that and I thought it had worked but it's now mid print and still screeching. I don't have a silicone free lubricant on hand so that was why I asked for other ways, do you have any other ideas beyond those? If you don't that's fine, thanks for the help!!
humble stratus
Not really that I can think of rn
signal perch
Okay, then thank you very much for the quick help and I'll see what I can do!!
brisk stratusBOT
> Hey <@758031053653934139>, thank you for contributing to this forum.
> Please...
This thread is closed now :white_check_mark: