✅ - Bambu P1S clogged maybe??

[long thorn]

Hey we are having trouble without p1s and we are not able to fix it what ever we do it keeps doing this what I sent in the photo or just not even print anything it’s only whenever we start a print it comes out the nozzle just fine does anyone have any ideas because we have our first market coming up in a week and it just started acting up

[sterile mesa]

Hey @long thorn, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

[long thorn]

Oh ya we are printing with a p1s and we also changed the temps before this to see it that would help and it didn’t we are only printing with PLA right now

[frail oasis]

I can't see exactly what's going on.

@long thorn can you explain more what is happening

[solemn harness]

We are many we are legion.

[regal steppe]

make a video from the front, through the open door, the onboard camera has the wrong position to diagnose anything, but printquality.
Those photos of a toolhead do not show what it is doing, but i guess it is autoleveling. it does that before every print unless you disable it, but i wouldn ot do that. it autolevels to make sure the first layer id build up flat.

[long thorn]

I think we figured out that we flipped the build plate then we had to put all the print to the very back of the build plate with more brim because the front was alittle bit to cold

Thank you though guys it’s finally printing properly

[sterile mesa]

This thread is closed now :white_check_mark: