Pockmarks...

[faint jolt]

Hey @steel forge, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

[steel forge]

Right! So. I'm using VOOLT3D PLA, I'm having the gaps problem, and I have an ELEGOO NEPTUNE 3 PRO as per Frank's reccommendation.

My settings are very long. Could you tell me what you'd like to check?

That's a really cool image you have

Additionally, I believe I'm having trouble with overhang

This print was standing up when I printed it

[steel forge]

Right now my biggest peeves are the pockmarks and the overhang

[broken finch]

For that print its simply the design

It looks like a 90°angle and these are often look like that even with the most densest and perfect supports

[broken finch]

That one seems to get issues right a roung 65 to 75°angle

Which happebs because the layer on top has no connection to the layer below anymore

You can try more support (no tree one) lower layerheight a little higher temp with slower speeds

Otherwise a larger nozzle diameter of .6 would help too but that has other downsides

These two look like they have adhesion, slicing and cooling issues

Maybe dry the filament and run a retraction tower

[steel forge]

Right. I managed to fix this with retraction settings of all things, but I haven't managed to fix the overhang

These are my support settings

I also have a layer height of .16

[broken finch]

Take a look at your gcode preview

You can usally see at which part of your print the inner walls show through

[steel forge]

I’m afraid I don’t understand