✅ - problem with filament? | Frankly Built's 3D Printing & Cosplay Community | Page 1

dense sail Mar 22, 2024, 10:45 PM

#

i tired many times to print something with this filament and it didn't work. then i went and grabbed some of my cheap filament that I've had for a couple months and it printed perfectly.

broken falconBOT Mar 22, 2024, 10:46 PM

#

Hey @dense sail, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

sleek copper Mar 23, 2024, 12:22 AM

#

What type of material and what settings are you using

dense sail Mar 23, 2024, 3:51 PM

#

It’s pla, 60 for build plate, 200 for nozzle

sleek copper Mar 23, 2024, 3:51 PM

#

Try 205 maybe even hotter

#

Black tends to need a hotter nozzle

dense sail Mar 23, 2024, 4:18 PM

#

Ok thanks I’ll try that

pearl flicker Mar 24, 2024, 4:02 AM

#

That is the same stuff I use mostly. I run it at 230

dense sail Mar 24, 2024, 2:45 PM

#

Ok I’m dealing with clogged nozzle right now but as soon as I fix that I’ll try that

dense sail Mar 25, 2024, 2:23 AM

#

thank you so much, i finally fixed my printer and i set my nozzle temp to 230 and it is printing flawlessly

rigid mica Mar 25, 2024, 7:37 AM

#

Im printing right now with this filament and I’ve used it before and always was very good

broken falconBOT Mar 25, 2024, 1:48 PM

#

broken falcon > Hey <@1195147367683457105>, thank you for contributing to this forum. > Pleas...

This thread is closed now :white_check_mark:

#✅ - problem with filament?