Hey @thorn pebble, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.
#Help with modeling/Printing/Settings... idfk
stone canopyBOT
thorn pebble
Forgot to add images. Its supposed to look like the one in yellow.
tacit sapphire
Swap to a smaller nozzle or upscale the model. That’s a much too detailed model for the nozzle. You could also resin print it. That should give you exactly what you’re looking for
thorn pebble
Swap to a smaller nozzle or upscale the model. That’s a much too detailed model ...
It would be too big if I were to scale it. And sadly I dont have a resin printer nor do I have a room for it.
fresh shale
If you can't change the thickness of some of the walls or scale it up then your only options are to try and switch to a smaller nozzle like claw mentioned and see if that works but if not then your only option is to resin print it. If you can't resin print it then you may be able to find someone who outsources their printer and print it for you
But you also face another issue, some of your details are just free floating so they will just fall out
You have to either connect these little details to other walls or give the whole thing a backside
thorn pebble
But you also face another issue, some of your details are just free floating so ...
This is not the full model. It will have a back plate to it. I just needed to see if this part would work before adding it.