✅ - pla won’t stick to this part of the bed

[torn coral]

I just recently got a cr-10 smart 3D printer and I had two issues one where the corner was not sticking and on the other where it doesn’t seem to even come out auto leveling seemed to fix the part where it wouldn’t stick but now the other corner still doesn’t let any pla go.

I ran a bed leveling file and it came out alright but that corner still has no pla in it should I loosen the bolts underneath or tighten them I’ve never done this printers leveling manually any help would be appreciated.

[frail cypress]

Hey @torn coral, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

[brave sparrow]

Go around corner to corner with a piece of paper under the nozzle, adjust the knobs until you feel just a little friction from the nozzle touching the paper. Do this like 2-3 times

Does that make sense?

[torn coral]

yes ive done it before on my ender 3 but that was like 2 years ago so ill try it thank you

[torn coral]

Now it doesn’t want to print out the circles from the bed test

[brave sparrow]

Meaning it’s not level

It’s too close

[torn coral]

I’m guessing this is better right?

[brave sparrow]

Getting better

[torn coral]

Any other advice to get it closer to 100%

[brave sparrow]

Keep leveling, have the bed at printing temp, don't give up ;)

[torn coral]

Should I try to get all of them to be filled with more red

[brave sparrow]

yeah, still too low

[torn coral]

How would I get the middle leveled

[brave sparrow]

Use this chart for help, should have sent this before

[torn coral]

So should I try to get them close to this one then

[torn coral]

One of these top two

[brave sparrow]

Very top left looks great

Try and get them like that

[torn coral]

Alright thanks sorry for hassle

[brave sparrow]

Nah you're good bro, I'm here to help ;)

[torn coral]

I don’t know what I changed but this is the best I’ve got and the cr10 smart only has one nut on the left and 3 on the other side and I can’t seem to level it any further

[gleaming fable]

that is not how you level the bed

the nut you are seeing is the nut for eccentric wheel, which grabs to the aluminium extrusion. you adjust the nut so the wheels grab to the extrusion and dont wobble

the bed on cr-10 smart is different, it doesnt have any leveling knobs. you are at the mercy of the abl. sorry to say but cr-10 smart is a flawed designed printer

[torn coral]

Yes I took it back they looked at it and the bed was warped so they gave me a new printer as a swap and that one worked

Thank you for the help though

[frail cypress]

This thread is closed now :white_check_mark: