#flsun Super racer issues

19 messages · Page 1 of 1 (latest)

round hemlock
#

I'm having major issues with my flsun super racer. My bed is clean and for some reason my pla won't stick to the bed. I am also having major issues with stringing but none of the stuff I've tried off Google searches have worked. Cleaning the bed, trying glue sticks, temperature, nothing is working and I'm starting to way more heavily against the flsun and just chalking up to a loss and getting an ender unit.
Any help fixing this thing would be greatly appreciated.

lunar masonBOT
#

Hey @round hemlock, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

round hemlock
#

I'm still having the same issues no matter what I adjust. Temp and bed temp and can't get this to stop.

thin socket
#

Well from my experience @round hemlock your leveling is off try adjusting it

#

Thr x-y axis

round hemlock
thin socket
#

You can manually adjust it from@beneath it

thin socket
#

Or switch out the nozzel

round hemlock
#

I don't see any way to adjust the flsun bed at all, but what would the nozzle change do? I figured that was just to make sure the filament was hot enough and to obviously extrude in the exact spot it needs to be

round hemlock
#

I have tried leveling and adjusting and it just doesn't seem to stop the issue. It either will not stick or now the nozzle seems to be scooping up some of the initial layers. It almost seems like the nozzle is too hot and is melting the print and collecting on the nozzle

round hemlock
#

This is what is happening after multiple times of leveling the bed and checking the temperatures to make sure it is at the settings the pla requires and making sure the bed is clean. What you see on it is glue stick glue that was provided with some filament to help with adhesion.

#

Please someone help

tough cradle
#

You can't adjust the bed. I have the v400. Have to had that issue myself but maybe redo the bed mesh again. Like when you first set it up. I cant see it being that but worth a shot. What material are you using and what Temps. For example. I usually use pla + nozzle at 210 bed at 75 -80 and never had an issue. I use to have some issues with the bed at 60. So raised it.

Maybe try those Temps if using same material

round hemlock
#

its PLA and PLA+

thin socket
#

Maybe the nozzel is too close

#

It has to be something with the nozzel try switching it out