Nozzle too high on first layer | Frankly Built's 3D Printing & Cosplay Community | Page 1

buoyant field May 31, 2023, 1:05 AM

#

My bed is level but my nozzle is starting very high for the first layer and it is causing terrible curling, is there a setting in cura to lower it for the first layer, I can’t step my initial z-step with the printer I own

tall hamletBOT May 31, 2023, 1:05 AM

#

Hey @buoyant field, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

buoyant field May 31, 2023, 1:07 AM

#

I should also add the nozzle is starting at a different height when printing then when I go to level the bed

last linden May 31, 2023, 3:45 AM

#

What printer?

#

@buoyant field

buoyant field May 31, 2023, 4:15 AM

#

JGAurora A5

last linden May 31, 2023, 4:54 AM

#

buoyant field I should also add the nozzle is starting at a different height when printing the...

if the nozzle is too high when you home the printer, you should adjust the z-endstop

#

https://youtu.be/7G2OftpUxow?t=337, move it lower

YouTube

Da Hai Zhu

JGAurora A5 and A3S Tutorial #1 - Leveling the Bed

This is the first is a series of tutorials covering operation, maintenance and repairing the JGAurora A5 and A3S 3D Printers.
In this video, I'll show you how to level the print bed for the best results.

Special Thanks to JGAurora for Supplying the A5 for this Series

▼▬▬▬▬▬▬ Supporting Websites ▬▬▬▬▬▬ ▼
NEW Unoffical JGAurora Forum: https://jg...

▶ Play video

buoyant field May 31, 2023, 5:04 AM

#

the home z is just fine, for some reason when I go to print a file the nozzle starts at a z higher then it’s home z position and leveling z position

last linden May 31, 2023, 5:09 AM

#

you description is not very clear, do you have a video?

#Nozzle too high on first layer