Currently I’m slicing my models at 60mm/s and when I load the sd card into my printer it shows it at 100mm/s and I have to manually lower it back to 60. Has anyone experienced this issue? Couldn’t find anything on google.
#Print speed issue - CR10S Pro V2
lone pewter
vapid vigil
The profile you're using may not be for the right printer
I tried using an ender profile for a neptune and it tried printing at 300mm/s instead of 70 to 100
Some profiles are messes up like that
woven furnace
Currently I’m slicing my models at 60mm/s and when I load the sd card into my pr...
Are you talking about the „FR“ display on the printer? That‘s the feed rate as a percentage of the print speed you set in your slicer, i.e. „100“ on the printer in your case means „60mm/s“. If you lower it to 60 you reduce the speed to 60%.
vapid vigil
thats actually a more likely scenario
stark dove
assuming you're going into the "adjust" menu after starting the print and seeing 100 as the print speed, it doesn't mean 100 mm/s. it means 100% of the speed in the gcode
lone pewter
Oh that makes sense. Yes once I start the print I go into the adjust menu. And saw “100”. I lowered it to 80, whoops. That explains why the print took longer 🙂