cr 6 max y axis issue | Frankly Built's 3D Printing & Cosplay Community | Page 1

tall turret Sep 30, 2022, 4:11 PM

#

So when I am trying to do anything in my cr 6 max when it has to move to the back of the y axis it doesn't stop and grinds. When I auto bed level it sees the center back as the front left. Any idea how to fix this

frail wigeon Sep 30, 2022, 4:14 PM

#

I haven’t messed with them in quite a while but I do believe you have to manually adjust in level that bed with the underside thumb screws and get it as level as possible first before using the auto bed level once you bring the nozzle down to one corner, adjust until it’s the height you’re happy with with the server is disabled manually slide them extruder nozzle to the other side of the bed. Make sure it’s adjusted properly same with moving front and back once everything is level, then turn it on and auto adjust.

#

To be honest I’ve gotten rid of all the Creality Machines I had in left with just 1 now becuase I couldn’t stand the inaccurate leveling process with them . I now have 12 Prusa machines with 3 Prusa XL on order

random valve Sep 30, 2022, 4:16 PM

#

Make sure your home limit switches are in the right place and not being hit by anything other than what they’re supposed to. My other thought is e-steps. If you home the printer, then jog it to its end of travel, does it line up with the max y distance on the os?

tall turret Sep 30, 2022, 4:17 PM

#

frail wigeon I haven’t messed with them in quite a while but I do believe you have to manuall...

Well the issues is it doesn't seem to register the bed is where it is.

frail wigeon Sep 30, 2022, 4:17 PM

#

Aahhhhh yea check the switch’s are functioning and no broken loose

tall turret Sep 30, 2022, 4:18 PM

#

Switches seem to work. There is only 2 one on the back of the y and the nozzle housing

random valve Sep 30, 2022, 4:19 PM

#

If not either of those than it might be a firmware issue

tall turret Sep 30, 2022, 4:20 PM

#

I didn't even think of that. So maybe re flash it?

random valve Sep 30, 2022, 4:50 PM

#

It’s a bit outside my area of expertise, but I’d say flashing it is worth a try if its not esteps or switch interference. And if not that, then maybe a different version

tall turret Sep 30, 2022, 4:57 PM

#

I'll give those a shot tonight. This whole thing is slowing down my punisher war machine. It maybe time to invest in more printers

tall turret Oct 3, 2022, 3:28 AM

#

@random valve so the refreshing fixed the issue. Thank you for your help

random valve Oct 3, 2022, 3:29 AM

#

nice. strange issue, will have to log that one

#cr 6 max y axis issue