#[Released] [Free] Wentward S3 - https://www.beamng.com/threads/wentward-s3.95636
1 messages · Page 3 of 1
I'll remove my lua hack once the bug is fixed
literally unplayable
Yet another small update
- Added "School Bus Yellow" choice. The school bus configs use this now, which may fix them spawning in white in multiplayer mods.
- Fixed a small bit of model clipping in the headlight trim
- Fixed a couple configs forcing a custom license plate
- The Transit config can now have its color changed in the vehicle selector
- Added support for the decal editor
wentward_s3.zip in the main post has been updated, overwrite your previous wentward_s3.zip with the new one
69
Nice.
could you fix the turning radius
I'm entirely redoing the steering jbeam
With more steering angle too
This also has th eside effect of improving the front suspension behavior as a whole
Probably tomorrow I'll post another small update with the following
- Completely redesigned steering mechanisim
-- More steering angle
-- Improved suspension interaction
-- Better steering mesh deformation - Adjusted crossing arm open angle
Since when did a skin editor exist?
Question, are the brakes the same or close to the real life bus? If not is there a way that you could update the brakes. Let me just say I am not telling you to, saying this so people won’t get butt hurt for asking.
When does this bus get added to repo?
Smoothed out the rear cap
About to post the next update
Smallish update
- Completely re-did steering physics
-- More steering angle
-- Improved suspension interaction
-- Improved steering responsiveness
-- Better steering mesh deformation - Improved the modeling of the rear roof cap
- The front tire is now slightly wider in the physics model
- The crossing arm now extends to a further distance
- Fixed a very minor normal map error on the front cap
- Fixed a small normal map issue at the rear of the roof
- Fixed a minor modeling issue by the drivers window frame
- Removed some hack lua code that was added to work around a bug in the decal editing code
-- If you cannot add decals after this mod update, please update your game to the latest hotfix
wentward_s3.zip in the main post has been updated, overwrite your previous wentward_s3.zip with the new one
https://www.beamng.com/threads/wentward-s3.95636/
yipieeeeeeee
As far as repo goes, I want to have a more complete vehicle before that happens
There's probably only one or two more bugfix updates that I'll end up doing, then we wait to see
a) If I make more variants
b) If my thread is suddenly taken down by legal, preventing any future development
Would be funny to see Bluebird complain about modders "stealing" their design on mods for games, when their design is based on a generic one from the 1950s
for one variant you should give the bus more metal body panels
sort of like a derby bus
tryna find an image
I can’t find one but it looks like steel grating
like down the sides and on the bumpers
yes
i used to watch these light up on the bus for the entire bus ride in like 1st-4th grade
Yea
tbf i still would if i didn’t live so close to my current school, you need to be at least a mile away to be offered transportation (i think)
Please get a shorty out 🙏
Yep!
Always read the release notes
Where's the link for the mod?
no way
In the forums (search it up)
Yep. Found it. Thanks!
np, just re-download it when he says he’s updated it
at some point it’ll be on the repo tho
Aight
I didn't even know what the bus ended up being named until I downloaded the mod in the forum
Zooweemama
Mudflappin
Also I'm aware someone just made a set, but I'm not suddenly making them because of that
It's been on my list for a while lol
Hmmmm
I wasn't expecting them to be attached like this tbh
Oh, they're a pretty tight fit, hopefully I can prevent clipping too bad ingame
Hopefully yeah
Guys, is the back emergency door of the bus openable?
I tried and I guess no?
Oh cool so the new truck has common mudflaps
I can use the new PBR textures with my own normal map to customize the depth
That's good
What about turn indicators on the side of the bus by the service door and stop arm?
Love this bus! My only suggestion is EU plate support and metric gauges. Good job, mate.
The white bug was fixed but now its yellow instead the lettering still does not show up
What map mods have schhols? I haven't seen any maps with schools other than that big map with a water park and stuff (forgot what it's called)
When doing some work I noticed when you remove the right seats the railing isn't attached to anything & probably shouldn't be there if no seats are installed
I just set it up like this to keep the railing
How do u get that customization menu
Garfield Heights has one
Ah this one
I think the TODO before an update today is
- Tweak mudflap jbeam so it's not as bendy (currently goes thru the body)
- Model the mudflap mounting plates
- Redo config thumbnails
what is the current list of things to be included in the update
Re-done underbody support models
Added side signal lights
Added mud flaps
Fixed a minor modeling issue on the side trim
Fix underfloor model being protruding out of the body
Fix a texturing issue with the 'LIONS' skin
Limit the fuel display to a maximum displayed value of 999
Would we have to re add the file for the update or does it update by itself?
Oh yeah another bug the bus does not store your miles like the FS does
It's using the games built in odometer system now
👍
You'll have to de-download it once I post it
When are you having this placed in repository for players using GeForce Now?
Or have you not fully finished it?
Update is out on the first post of the forum thread
https://www.beamng.com/threads/wentward-s3.95636/
I looked & missed it, my bad
exterior fuel door? 😛
i kind of like this bus
It's a blast, not to mention high quality
Is there any chance you could add the RV interior from your old FS-65 mod to it like what JoshD did?
Not currently planning on jbeaming right now
But I'm making it a bit more modular to make this possible in the future
3 Sunbursts long
mod doesn't pop up when I download, any fix?
I swear I can smell the diesel when i look at this
Imperial bro’s most sane measurement
sounds like the wise words of a manlet. I bet you're only 9.64785335263 cans of Monster Energy™️ Ultra Paradise tall
Afaik they were never officially an option on this generation nor the previous
aftermarket 😉
those look like something you would see on a russian trolleybus
Does anyone know how to make a license plate mod? In my state, they have a unique plate design for school buses that no one has made for BeamNG just yet. I would love to put it on this mod whenever I use it
Hey guys, is it planned for the bus to have openable doors and latches in the future?
Are you gonna make a unique engine or lore friendly engine or is it always gonna be a CAT?
These were placed on all Thomas 3800s from the release to late 90s’
Yeah I wanna see a TCM or the new Belasco Diesel engine
i wanna see an RV config
Yo i need the link
#1150448043091579060 message
Thanks
@sand forge You should have a chat with JNR231, they got those types of mirrors working with their bus, maybe they'd help get the S3s working
Theirs are low enough field of view that it works
If you look at them at even a slight angle you start to see the edges
Hmm, frustrating
hey I'm experiencing an issue, if I turn too fast or swerve left and right the wheels lock up even with a fresh reset of the bus.
It needs a recall. Imagine if an accident happens.
Lol
I think in my state we just use exempt plates
@heady zinc Here's the link
My state just uses county plates with the label "apportioned"
And private schools use license plates that say "school vehicle" but it's not a county plate
agh I see why this happens and the fix would most likely be adding another body node
is a super-short bus config currently planned?
no problem
Man, I sure do hope this will spark some new bus mods like say a Vision, probs one of my favorite school buses in design.
it would be nice to actually hear the turn signals with the engine on
how do i get a different engine in it im not a fan of the current
Ngl the sounds on that bus are loud af
that is true tho
broo this is outdated lol
How? It just released a few days ago
it's working fine for me
Just used it, no crashes or anything saying it's out of date...
You know what I feel is missing?
A placeholder for this thing the bus driver uses to stop traffic as to allow children to cross the road safely.
can someone help?
what mod could break the wentward?
T series expansion pack has been reported to break anything with air simulation
This mod also requires the latest version of the game
maybe your computer is not up to par hardware/software wise
on a undervolted intel core i9-12900k and a geforce RTX 3060 Ti on win 11, it works smoothly for me no crashes or anything and at the same frame rate as every other car
CPU really bottlenecking GPU
my cpu draws so much power that i'm on my 3rd power supply
i'm running on a 6yo 1200w that might have a faulty OPP so i'm gonna get a brand new actually good one
anyways back on topic
Gavril TCM would probably match this best, from a lore standpoint
Wentward also works no?
The DT40L uses the TCM
the wentward uses a gavril engine yeah
can the suspension be fixed too cause every like if I go up a hill, it is like hella slick and can't even make it around the sharpest of turns..
It’s a bus, what more do you expect it to do?
ahh you see theres a small ammount of people, who refuse to use a bus properly
are there any actual schools in the game?
No
Us maps seem to lack schools
Plans on rear engine configurations "S3RE"?
AFAIK Dummiesman has no plans to mod Beam further post-S3
Oh
is there plans for a rear engine version?
Someone else is making RE, but not a Blue Bird-based one
https://discord.com/channels/710082165253079061/1135847208940490822
that's been on hold for a while now
ive seen it but i like older model school buses
like this one
the headlights look weird on that one and it looks like a city bus with school bus lights and lettering on it
They're from the same generation tbf
Lore-friendly 👍
noice
Assuming that Wentward is owned by the Gavril Motor Company.
that makes GMC LMAO
Nah, their DT40L, according to multiple projects, ran not just the TCM, but also foreign engines like the ETK 6D120
Nice.
I wonder if people are going to make mods for this bus that replaces Wentward badging with Blue Bird badging to enable people to drive a real Blue Bird All American in BeamNG.drive.
now that i think about it it really wouldn't be hard, change like 4 textures and call it a day|
in all seriousness, if anyone were to do this, i doubt it wouldn't be dummiesman
My personal copy has high resolution badging in Blender but due to previous legal incidents with the company it wasn't included
id love a camper conversion mod for this
I'm not sure what this is called, but I remember my school districts having these glass 'windows?' around the SCHOOL BUS plaque that is illuminated when the headlights are on. Was wondering if there could be a configuration for that at some point
International 3000 Series
For full immersion, I'd suggest the feature to open the driver's window when it comes to the bus driver stopping at railroad crossings along with the doors and lowering the radio and turning off the fans to listen for an oncoming train.
3800 Bluebird
Cool
What’s the point in that.
RPing is what
Just open the door and look…
you could probably post a zip of it here
@sand forge pin up this massage, please
-https://www.beamng.com/threads/wentward-s3.95636/
I can't do that but It's in the thread topic
[Released] [Free] Wentward S3 - https://discord.com/channels/710082165253079061/1150448043091579060/
[Released] [Free] Wentward S3 - #1102973298222051358
[Released] [Free] Wentward S3 - https://www.beamng.com/threads/wentward-s3.95636
When is the next update gonna be for the bus approximately?
How?
agenty global values tuning mod
Makes sense
Prison bus someday?
anything new?
doesn't seem like it.
anyone know how i can get a different engine?
you sadly can't.
(unless) you can mod one in
Unfortunately I have no clue how
yea fair.
I know that the developer isn't active or super active however I want to post an issue and it's not the first time it's happened.
(FLASHING LIGHTS WARNING)
are you sure that’s the bus?
no
ok
I’ve had cars flash like that near the factory in west coast
that’s why I asked
How long until this lands on the repo, man?
Heard something regarding bluebird requesting this mod be removed from beamng forums…
I’m afraid the mod may not be continued
I really hoping that’s right but
yea I've heard of them doing that, however it's one of their older models and it doesn't use any of their branding so I don't think they can make a proper copyright claim, tho I'm no lawyer.
I’ve got this mod, and I think it’s great, but some friendly feedback: you should see if you could make the engine sound a little quieter. You can’t even hear the turn signal clicking in the cab camera
And it’s even louder by the tailpipe lol
amazing, but add this pls?🥺
What bus was that from?
Every bus I’ve ever been on
same
yes while a lot of buses have this there are a lot of contractors/school districts that don't use them.
YES, My bus has those
i rember when he was deving he made a spot for this but was never added
One of the spare FS-65s have them from what I seen
178 is the number, and I believe it's a '97, because the last 65 we have in full service is 196, which I'm thinking is getting retired after this school year ends
question, well you ever restore fs65?
and for the other peopl CB-40
last I heard about it he said no.
some other people like aplaneguy has released a fix.
do you have a link to it?
yea here it is just click on the zip files to download them if you don't know already. https://www.beamng.com/threads/freightliner-fs-65-on-hold-indefinitely.69915/page-18#post-1677621
also sorry for the late reply.
Rear overhang simulator
Just when many thought this subchannel was dead…
The legend is back!
Longer version???
The rear end swing must be insane
How to test out new seat jbeams:
🦅🦅🦅🦅
Exhauts are super lightweight and so they have sparse nodes directly along the exhaust, then a bunch of support nodes off the edges
I usually do it in a corkscrew pattern
smol
the engine noise is really loud on the inside of the bus, are you planning on a fix?
or is it supposed to be that loud
it is that loud in the actual buses ive been in
mines rear engined though but i sit in the back so its basically the same
petition for dummiesman to reuse the rear half of this bus to make a type-c bus /j
when will we ever see a TYPE-C bus again?
Type Cs are needed honestly
Exactly we don’t need anymore flat nose buses
Type C is better as a derby bus ngl
Looking good so far
And for front end collisions
Ye
I'd like to see another like that, what kind, whether its a bbv, ic ce, thomas C2, 3800, idc
I'd like to see a type C bus like that
But I'd also like to have dummiesman finish this project first before starting on another one because, for one, less stress because focusing on one thing at a time is better than doing multiple things at once
I don’t care
Other than not an International brand bus with that stupid smile
boxy and old
corbeil
I like em like that
3800 is a must
but if anything modern
do a thomas c2
I've been thinking of buying a first gen CE, FS65, or 3800 irl
They're cheap asf around here
For a 3800 I would prefer an air/hydraulic door instead of a manual door but those alone are rare
well we had a fs65
but uh
it got like mesh whatever
Yeah I remember that
Looks like the first generation Blue Bird Vision.
yes
Does this mean a possibility of 3800s? 👀
I'm more leant towards the 2008 cowl Vision, but a'ight.
Interesting…
Ooo bbv
Same but no issues towards the first gen even though it's a bit too boxy for my liking
Well, I guess he's starting with that first then the updated one.
Yep
You should make a transit version like this with transit windows and the metro and transitbus livery
Or if you're not down for this idea atleast add a destination board like on the fs65
International and Thomas on top
Thomas HDX
In the next up @sand forge could you maybe make the engine quieter? so i can hear the turn signals
id like to see and ic ce be made
See, the solution to all this is
https://wiki.beamng.com/Introduction_to_Vehicle_Creation.html
🙂
Anyway the choice comes mainly for practical reasons
Same headlights and running lights, same engine, same body, similar dash panel
Honestly from an objective standpoint ic and thomas suck too due to reliability reasons (as far as I've heard)
All modern buses suck, before they started putting DEF crap in the tanks we didn’t have issues
two good mods
Where can I find the wrecker?
Looks like automation
It's currently a paid mod but you can find it here: https://www.beamng.com/threads/jerr-dan-50-60-rotator-paid-early-release.94451/
It will be a non paid mod when the creator hits a sub goal
If I had the time I would, trust me
what zysom said
wow im exited for this
does work for me decals are invisible
any plans for a 3 axled version
when release swb versions
but decals are invisible for me
any plans for thomas saf t liner c2 mod
50ft version lol
when manual door version
Whenever they feel like it.
Someone started to make one and it got taken down for copyright reasons.
where i can see it
Plus I think that dmmiesman said that this was the last mod that he's doing.
You can't.
It got taken down
For copyright infringement.
but easily they can rebadge the bus to wentward or any lore friendly thomas based company
It can't because Thomas still has the rights for the design.
but why remember the f65 repo cb40 it was thomas rebadge too}
It's an older bus (that was replaced by the c2) and at the time of release the designs for the body and frame were at least 12 years old.
So that's why I think it was allowed by Thomas to stay up.
Rather than the much newer c2 that's still in production and their main cash cow.
well c2 is one of the vehicles what i want to see in beamng
why there is too much thomas c2 for rigs of rods and they are not taken down
Either the mod makers paid for the license to use the brand or the game is too obscure for them to really bother with taking down mods.
beamng is a bit underrated so why they are losing time in taking down nice bus mods
not true bamng is highly popular
thomas built buses is afraid of seeing a saf t liner in one off those youtube shorts being destroyed
yea idk why its just free advertising
That's not the point nor the problem though, They're protecting their Intellectual property. (even though I do find the idea of Intellectual property stupid)
When I learn to make stuff for beam I'll probably do a C2 but I'll only keep it for myself cus copyright
Can't take it down if its private
Very agreeable imma work on a ce when I learn.
That's what I'd like to do
Although if I did a ce then I'd try to release
Yea honestly if I get into modding I'd want to try to release the mods however I don't know if dealing with copyright sounds like fun.
Yeahhh
If anything I'd probably call a representative and see how they'd feel about it
or is in modland they dont takedown anything in that 3rd party site
no i said if someone or dummiesman made one you can upload it on modland
Okay
because in modland no one will take it down
@sand forge are you plannig do a small microbus like this based off the d series chassis
He's not doing any mods after this unfortunatly
oh just a suggestion dont take it serious thanks for understanding
Bus'
So we're not getting the wrecker?
I could probably try something like that to play around with
@wide shoal this wrecker?
Yeah
This is where you get it.
Yea
The author will release it for free when they hit a sub goal on their youtube account but it'll be a bit before that happens.
Whats the sub goal
funnyphysics yt channel
I think they said 250k
So not gonna be free
Not for awhile no.
But if you can find around 5 usd it's worth it.
Not gonna happen any time soon sadly
Fair enough.
idk
funny part is i remastered the FS for private use for now
thing is i think this version i have of the CB40 legit will prob not break in newer versions of the game
cause i made it like that
personal private bus to use for fun
Hey Jacob didn’t realise u were in this server too
I am
Funny enough I never modded beam
Till recently
The fs65 was needing some work so I remastered it made it loo good
Look
I also made it not conflict with the wentward S3
wow is gonna be public sometime or private a fs65 CB40 remaster thats im looking for
Anyway we could get a copy of this mod? I’ve been looking for a remastered version that isn’t broken
I would love to see a 3800 rather than a bluebird cause the hoods on 3800s are nicer than bluebirds
Bluebird is the body manufacturer and 3800 is the chassis of international
or a international loadstar carpenter hoods of those looks nice
Nah they said that the mod is "for private use" so unless they say otherwise I wouldn't expect anything.
all the s3 needs is belasco diesel cui9000 engine
why are you askin i would never release a project without the authors permission so the answer to this is obviously no
plus it's far from finished as i might make new parts for it
things i already did to it was Fixed tires not being orange-
-New Glass Reflections
etc
normal mapped the dashboard so you can see the leather
new camper interior colors
you mean dynamic mirrors or what
To get this thread back on topic, the Guage covers are looking amazing!
Gauge
yea sorry, excuse my dyslexia.
First one right there, well that's a fix
i might put dynamic mirrors on it next i fixed alot of stuff on it
i made the engine sound like a c7
cat
now swap a belasco diesel 900cui on it
It’s spelled correctly
hey ya'll i got a new engine in it with the universal engines mod but the transmission don work
Prolly cus the mod isn't compatible
in a community like this i'd be careful saying the word you used for transmission, ik you had no bad intention but it can be insulting to trans ppl
just say the gearbox or the trans or the transmission
atleast i've heard it can be insulting
i mean, the slang term has existed way longer than the insult has soooooo...
¯_(ツ)_/¯
oh my god
what the hell
IT IS on wikipedia
and no i cannot find a transgender related insult
can we not be so sensitive about these things
IT'S LITERALLY A CAR PART
or a vehicle part, for that matter
Do you guys really think like this???
lol i don't give a fuck i'm just saying u might wanna be careful bc other people will give a fuck
The west sure have gone woke huh.
What do you mean by "woke", exactly?
Yep, don't. Politics drained me
I tried swapping a Gavril TCM into one (lore-friendly power!)
Did it work?
They really have, and its sad
I mean, there's a reason we don't use a certain term for cigarettes as the norm
I don't use the word we're discussing because, yes, it is a legitimately derogatory term towards a group of people. It doesn't hurt me at all to change my wording if it means there's a chance I'm not going to offend someone else. It's more about respect than 'woke' 🙂
While I don't agree with what you said, I think we should change the topic back to Wentward S3 before both of us (well I'm probably going to be the first) get banned.
Anyway, what is new since the last time I checked this thread?
supercharged school bus when
Hey @sand forge is there any new progress?
Pls don’t ping the owner
I see you like being an asshat
did someone steal your chin? lmao
Wdym it’s right there 😭😂 you are funny 🫣
You freaking boy lover
hmm?
ME?? NOOOOO NEVVER
Pls don't be a mini mod
😐
Dummiesman if u do end up making a vision for beamng can you give it a cat engine and a Cummins option. The file named i6d bus engine sounds just like a Cummins.
It’s been a while since any update on the different length configs and the vision, just wondering if the mod is being worked on or just slowly or something.
Flatnose school bus 😊 I've seen a few IRL, but you don't usually see them much anymore because they got replaced with newer buses
My district doesn't use anymore flat noses
I remember the last ones we did have were Thomas saf t liners
Transit style school buses are a safety hazard and also harder to work on. That’s why you don’t see them anymore
mods good but engine is way too loud
As far as actual progress, I haven't really touched it since the last progress update
The long version is just about complete
The short version falls apart on spawn
I might be motivated enough to update this soon though, no promises though.
what mod is that
And is dummiesman making a Bluebird ford - B700- B800 school bus?
Add it to repo
How's progress on this btw?
sorry for theping btw id di not mean to have ping on, i found out what mod it was its a proton bus
That isn't a Mod it's from The Crew 2
The real question is: is there progress on this bus to begin with.
DAM A VISION???????????????
I would cry such tears of joy (and pay $100)
Wentard optic
Wentward Foresight
Wentward Eye
Eh id go with Wentward vision
Ngl wentward optic sounds good imo
I'm just realizing that this is missing engine mounts, the engine just kind of floats there
It’s a bus what do you expect
Just get the remaster
It's been toned down a bit in my WiP version because it was way louder than even the T series
w
There's a remaster out?
dummmiesman, How is the progress on the 1st gen bluebird vison
Yes it’s on the last page
Send it
It no longer works for me.
On 0.32.2.0.16444
I really like this bus. Has anyone got a fix?
@sand forge
i'll investigate
wasn't able to replicate the issue
I don't get why it would break for me but not anyone else.
What other mods could possibly interfere?
Just doing a verify integrity.
💀
Luckily it didn't last 4 hours
nope
Also got the full error
Console seems to change when I hit print screen
I fixed it
Turns out at some point in time the script got modified and 0.32 broke it
Simply deleting the lua from the folder fixed it
Actually I'm going to go through my mods.
Kind of a shame that game updates break some mods. Meanwhile some games will update in such a way to keep old mods working.
Seems to be an issue only you have so it's probably a mod causing it
Do you think the blue bird vision would be released at all?
well he said he's not committed to it
I know but since it’s been a while like what’s the update
Damn, nothing new?
Nope, nothing new.
can you make a bus with a front engine?
(make sure to download the fix by a plane guy tho)
i'm already on it :3
oh wait i remember you, you already know lol
tommy ldx school bus
Is this mod going to be private or public?
private, but you can ask when im done
okay I probably wont. but it's a cool mod regardless!
ahh, thats fine. thank you regardless!! i wish i can make my own post about this mod x3
tyyy
ayeeee nice
you're driving an hdx for your school?
Well we run the T3’s but the HDX’s are spares
But on some occasions I get booted out bc some ppl struggle with the HDX’s so they take the T3 I’m on
oh yeah re is the best kind of bus
love it
Nah just do Thomas branding
Bc the fs65 on beamng is called the fs65
It’s just with bluebird that has the branding problem I think
you gonna make the new gen thats coming out too? its got the C2 body now
yeah i heard lol
but i gotta wait for the vids to roll in thats touring the hdx2
so definitely gonna be making that
Or Gavril branding
The FS65 was uploaded to the repo as the Gavril CB40
Yea but in the end it’s the fs65
Crazy how the rear end of the EFX is virtually identical to the rear end thomas was using in the 70s
yeah!! i honestly prefer the first gen rear ends, they’re the classics
I’d love to Thomas to make a type C with an international chassis or ford chassis
Since the F650 exists, it’s possible
There basically aren’t any options
dude imagine thomas brings back the fs65 with the new freightliner hood from the c2
i would love to see that in person ngl
You can buy a CE, Vision, or C2 (if you want a type C)
But what if I don’t want a freighter or Volvo? Chassis
I don’t know who builds the engine and transmission for bluebird
but yeah that would be interesting, because the only buses i see with the 2nd gen international chassis nowadays are buses from ic
I finished this earlier, and I plan on posting it on the forums once I’m done a septa skin for the neuplan N series
bluebird did use the 2nd gen internationals at one point with the 2005 model
but those are so rare lmao
ooo
The neuplan skin is loosely based off of the Neoplan AN440 that septa used from 1986-2016
Septa was Neoplan’s biggest customer
They ordered 1092 AN440s
just tom LDX or REX
It’s ford chassis
And either a Cummins diesel or ford Godzilla for gas/propane
Because they all lasted so little compared to other bluebird buses
If u need reference pics just ping me
The HDX has different mirrors. Some have the EFX style mirrors and some have the regular fat mirrors
Also the 2020+ have a square rear window
Some have grilles
aight
also should we move to #1266182108938895430?
hey, could you DM me?
oo
1 year since original post
Seems you're back in action, but what about the damn bus?
Still around? I bet you could turn the MD-Series into something like this.
That would be cool especially with some of the older pre facelift configs

Love this mod literally can recreate my schools TC2000s to a t
The jbeam wasn't really great for making multiple length variants
Currently toying around with doubling up the density, which would also allow me to do working emergency exits
You really can't make longer variants?
The jbeam wasn't really great
oo
Dang, you had it for a bit.
(first functioning test, sounds and other tweaks to be determined)
what about working emergency exit windows? thats what im implementing in my mod
I have this tab stack open for a reason 😉
Really not looking forward to jbeaming that emergency exit mechanism but, it should be done tbh
honestly
Probably will involve 8 support nodes + slidenodes + 2 sets of latches
just make them “doors”
It has to push up first to be opened
The difference between new and old
Model has been updated
The texture is passable in game but could be better
ah
also also
i think it would be cool if the windows on the s3 had actual window latches for xtra detail
its what i did for my mod btw!!
only a suggestion, u dont have to implement it
Currently missing some visual details + a limit on how far it can open
But this is really cool 🙂
I made the latch models actually open too
More openables
fire
oh yea i was gonna ask
do u have any plans to make like a transit version with rear doors?
theres these tourist buses in nyc
they use a bus chassis and have rear doors added to em
So, how's the fictionalized con-cab Vision?
awesome!! love the detail
just gonna say that ~80s, busses didn't have roof exits. can give proof.
Pretty sure it's based on the 4th gen though
https://en.wikipedia.org/wiki/Blue_Bird_All_American#Fourth_generation_(1999–2013)
The Blue Bird All American is a series of buses produced by American school bus manufacturer Blue Bird Corporation (originally Blue Bird Body Company) since 1948. Originally developed as a yellow school bus (its most common configuration), versions of the All American have been designed for a wide variety of applications, ranging from the Blue ...
Well that's ~20-30 years behind this 😅
wait what OS and browser you using?
also also
might i ask if we could collab on a school bus mod some time? a collab would be a great learning experience for me tbh
sorry. It looked eighties-ish.
US school buses always look 80s or older. They are stuck in the past.
And are REALLY expensive for a 1950s basic design
This is one of the designs for Brazil.
That’s a good thing
Why?
That looks disgusting for 1
And 2 old shit just looks better
And 3 there’s no reason to change something that ain’t broken
I Agree they look ugly, but it is form over function. They are built to pickup kids on rural areas, so the short front overhang, the HUGE departure angle and optional 4WD comes real handy
What about the bluebird vision and International ICE buses
these are barely used
Also they are built with the latest technology in safety and construction, also they offer comforts that no American School bus offer, like AC
American busses do have AC
School buses?
yes
I've seen some, but all of them look Aftermarket and tacked on
But maybe those I've seen actually have aftermaket A/C conversions
Those look like what they are, old bodies with modern hoods
The ICE is the out dated one
bluebird vision has seen a little more updates
the international ICEs are much more reliable and last longer than the new visions
It looks off just like a Chevy square body truck with a 2024 Silverado front clip
Or this, an 80s coach bus with a late 2000's front clip adapted
the 2025 Silverado doesn’t exist
Nvm it does
Looks absolutely nothing like a ICE tho
But you get my point
I guess so
The main problem for me is not they looking WAY outdated
2wd sucks
What's crazy is that they are REALLY expensive for a 1950's basic design with small updates
That’s because of the American economy
Its like VW making a modern Beetle based on the Classic one
And charging Passat Prices
they have
and that’s kindve what happened
They made the classic one unchanged
that's different lol
and they were cheap
and offered only in 3rd world countries
How much does a brand new Bluebird Vision Cost?
This again...?
Does anyone know if the MD bus might look like this?
prolly
cool
like if I had to guess
here's some seatless bus shots if you plan on doing an rv conversion. I've got more pictures if needed.
@sand forge are you going to make another school bus soon
Oooooo
I think the school vans (not to be confused with the buses, which mostly are municipal) look way better
whens the next update coming out just wondering
@limber condor
Is it planned for a release on the repo?
They are both in the ballpark of ugly so yeah I agree
@sand forge yo sorry for the ping but can i perhaps add a cummins 6.7 to this mod
https://youtu.be/jDe_WbCZBBw?si=TR2XWuK00F3gVkqW probably make it sound like this
Disclaimer: This video is for entertainment purposes only, and is intended for people who share the unique interests in the vehicles presented. NEVER UNDER ANY CIRCUMSTANCES SHOULD MY VIDEOS BE USED AGAINST DRIVERS.
This would be awesome
it would be so awesome, it would be so cool
true
just need the author’s permission, else i can’t do it :p
bus
I know everybody asks about it, but how is progress going with the blue bird vision style bus?
I got the new halogen lights working with this just for fun, gotta say it looks pretty good
Does it work with all the lighting? Or is it just headlights, tail lights, and turn signals? I wanna figure out how to do it myself
All of it
Could you possibly steer me in the right direction to get this working on my end?
Sorry, I'm not great at explaining how to do things
Is there a chance you could send me the file? I tried to figure it out myself, but I can't understand anything about this coding stuff 🤣
I'm sure it will be updated with proper support soon.
Is this mod ever getting updated
This kid gives me Thomas saftliner vibes
Says the one with a Greenville pfp and using shaders to make ur game better cus u got a gt1030
its a 4070, btw
and ur link to join ur server in bio is expired
Update?

e
@sand forge Are any configs or anything else being added to this mod? Just asking...
i think he quit the modding community idk
o
Unspeakably impossible.
peak
could somebody give me the newest mod link?
#1150448043091579060 message
Is there any skin mods for this?
can you put candy and garbage wrappers on the bus floor to make it realistic
No you cant.
I meant like add them in
I mean, the author of the thread hasn't posted a update for the mod since October of 2024, sooooo probably still a no.
besides didnt they retire from the modding community
from what ive gathered
i thought he just took a break for a min
Smooth
Wait…
thats cool as shit how did you do that
Dynamic mirros when
also, ik its wip but the lights need to fade in much more early
Coincidentally, the school bus body for the MD is manufactured by Wentward. How fitting, eh?
It has dynamic mirrors where possible
They cannot be added to the remaining crossview mirrors because the 'field of view' for dynamic mirrors is too small
Builtin smooth lighting system in BeamNG, see e.g. pessima.jbeam + pessima_headlights.jbeam
Components+Glowmaps+Props sections
Did you add anything else?
WiP version has double density Jbeam matching the new MD series bus density
- openables
(Demoed before but they're fun to play with)
Awesome!
Still haven't given up on the cowled version?
YAY! @sand forge is back!
Will we get more engine for it too? The real-life Blue Bird A3FE has more engines than just Caterpillar.
Here is a list from WIkipedia of all the other engines it has.
is it possible we could get lore freindly engines that has been my only complaint ever with the mod
its all lore freindly except for a caterpillar engine
Sadly, I just remembered that VeryonEB, the creator of the engines in his buses left the community.
even if it just used the belasco diesel found in the md it would be better than a cat
Yup
Here is what the John Deere engine could look like: https://www.youtube.com/watch?v=nQ6CIyfcq7o
For the John Deere engine, he could just use the bus one since its so similar in shape. What I also wish this bus had was custom engine sounds.
I may add the one from the MD series bus in as an option, then also do a repo release with only that engine choice or sth.
Since it's a forum mod it's pretty unknown still
Alright. Btw why did it never have its own mod page.
Contains branded contant, can't be put on repo with that
I see. But you put the FS65 and CB40 up and those had real company names.
The FS65 was only on the forums
Oh sorry, what I meant by its own page is this. Here is an example:
The link to the S3 isn't its own page, its like a thread
Btw just curious, was there even a middle engine school bus produced?
wouldnt that be wildly impractical
I'm suprised DTech listed it in description for the Dansworth bus then.
I guess it actually might have existed then!
Since Wentward is also based on Blue Bird in this case, what's a good name for a fictionalized Thomas Built Buses?
gavril
i think
because my gavril rex and the gavril cb40 are both based off thomas buses
Bruckell most likely, if bruckell is what I believe to be beamng's dodge brand. Thomas is a subsidiary company of Freightliner, and freightliner's parent company is Daimler-Chrysler, specifically the Daimler Trucks of north America division
Franklin Built Buses?
Sure
What kind of name would Ram be if it was in Beamng
no clue lol
If I would have to guess Bruckell because the Bastion is sorta based off a Charger, but this is really off topic.
Oh shit, he’s back.
Huh
Bruckell Bull
Actually, Bruckell would make sense as the Frame manufacturer, just like the MD-Series School bus is a Gavril Rolling frame with a Wentward Bus body
But not as the body
Good point
I don't know if American school buses from the same manufacturer can be based on multiple frame options, or they go to a specific manufacturer and make the bus around that especific platform
I hope that this bus will also get custom engine sounds. The regular semi ones just don't give it that CAT feel.
If the author ever wants to make a surprisingly similar but also extremely different bus I’d suggest the blue bird “All American” rear engine bus
Well the wentward “all firwoodian” or something i dunno
Oh yes and with this folding door in the front ‼️‼️‼️‼️
Wha... wha... WHAT?! DUMMIESMAN IS BACK FROM HIS SLUMBER/COMA/VACATION/BREAK/TRIP TO THE UNDERWORLD?!
just one question, will there be a repo release? This could reach much bigger audiences and people may be interested in making addons
As I've been saying for years: If someone had proper C7 sounds, I'd be using them, lol
you could ask @tardy axle to help you with that
he help me acquire cummins engine samples, so if he has a bus/truck with a C7 then he could maybe record some samples if he has time
You could also ask a YouTuber for them. And also @coarse snow , I don't think any of the buses over in Australia where @tardy axle lives use CAT engines sadly. CAT is more used in countries neighboring the US such as Canada for example.
I don't believe we have any CAT engines. I mean, we have their construction equipment, but that's completely different
Will you include the Halogen lighting affects?
#1150448043091579060 message
Hello @sand forge , @coarse snow is wanting a fix for her bus with AI and coloring. I sugguested you to her and she said yes. The bus just spawns in AI traffic but sits there idiling. It uses the category "Truck". It works with commands such as, chase/flee and others but the traffic ones don't work on it. Also, the skins are colorable for some reason. Would you possibly be able to help her on this? Also, I know this is off-topic.
I am curious what the name was you were giving that WIP Vision-based bus.
why is it not in the repo?
He said something about branded content being the problem
sweet
it is cool
bro just let her ask
you like
rushing her mod
god damn
i actually let him lol
What happened?
When bus update
I didn't say that
Yo, @sand forge Sorry for the ping but are you planning to release the smooth lighting?
@solar plover
It's not available
oh mb
for some reason I thought you were asking if they had implemented it not if it had been released.
I wondered how the MD70 series felt about this:
the wentward fusion could be the md70's newer sibling if it was made with 2 different suppliers
but that would be cursed
Let me guess, instead that Wentward will make the body, and the chassis will be made by Garvil, except that there will be no front nose made by Garvil and instead, Wendward front part will be the cabover. and the only part of Garvil is the chassis and the engine.
older versions are cool
but newer ones?
like wtf are those people doing?
you cant do that with newer buses its a sin
Well the bright side is that, you know mods are disabled if you join a multiplayer server in BeamMP, well, we can spawn school bus in any servers vanilay.
Isn't that how most school busses are made
the dev of this mod should make a t3fe bus
and call it the wentward r3
He retired
Is this added?
I want to try the 0.34 lights on the bus
If you know how to mod you can add it somewhat easily.
Could I pay u for some custom parts for this bus ?
Idk if u take commissions
I want accessories for it tho
i wonder if this thing will ever get an update
it wont
pretty sure mod author retired from modding
^^^^^^^^^^^^^^^
this is a really good mod
fr
uhhh has this ever been posted at all?
sadly no
He retired from modding.
has the short version been released?
as far as I know, nothing happened in a long while.
He retired from modding, no farther updates will be added to this mod
wish we can innovate this mod but we can’t </3
ngl so true
All I wish for was new lighting, parts, and better sounds
it would be perfect
i wouldve loved to innovate this mod and add more stuff such as a short config, interior improvements etc.
the interior is fine enough tbh
it is what it is
just needs textures
windows are lacking latches
I’d love to do a private thing but ik he wanted no work done with his mods so
how are ppl supposed to open them?!?
with their imagination
h
Dansworth retired so Wentward could succeed
@sand forge Could it finally be possible to mod your mods now that you're "done".
He’s unfortunately completely off discord too I believe
Last message posted was the 8th of this month.
Nah, he's still here. Most likely turn off any and all @ mentions though unfortunately.
Probably
Doesn't anyone in here talk to him in some form?
I've tried to reach out to him here, in DM's and on the BeamNG forums over time but nothing has worked so I just gave up lol. Plus the stuff I was going to ask him if I could use/integrate, I just ended up making myself so that worked out 😄
dunno if this means i could just make my own (private) a3fe mod (with my own models n everything) and innovate
I doubt it, I don't believe he wants any of his stuff messed with (except for skins of course). A rather unfortunate occurrence to most but I definitely understand it & respect it at the end of the day. Having someone mess with models and anything else that were scratch-made can be very frustrating.
Sadly it still happens, wish some certain mods containing copies of files from mods that did not authorize such happenings.
mm, yeah, its sad but its what they decided for their stuff. things are what they are
Yeah. I'm not too sad about it, kind of neutral. I definitely feel for that decision and why it was done. Hell, even I have heavily restricted my mod with a custom license. A lot of people these days think that once they have a mod like this, they can do as they wish regarding modification/alteration without consequence.
yup, but unfortunately thats what the Past Me™ thought with her first school bus mod and well, yeah that mod's gone and forgotten about lol
but hey we're good with the wentward fusion because i actually have jbeaming/lua/modeling experience now
I just wish we could get his bus pattern controller ported over, the way the BeamNG team did it was stupid.
Oh, yeah.
real 💔
sigh this is such a good bus
like all yall say, wish it can be revived and improved even more
The one in the Wentward bus body is also kinda ugly
The jbeam you mean?
Oh.
Oh hello there 👋
But anyways
I want to finish this someday but
- BeamNG has gotten kind of stale for me, with KissMP coming back maybe I'll play more
- I work and do a bunch of hobby stuff, have a house to maintain
- I don't get paid to do any of this or have anyone helping out
- food prices in Canada have risen over 30% in recent years, and struggling to afford to live kind of makes you less interested in gaming, lol
the TLDR is I've had around 30 minutes to work on this every 6 months or so, lol, which ends up getting spent mostly setting up a new version of BeamNG and doing small tweaks
