#modding-general
1 messages · Page 35 of 1
They pay for the mods.
Or they get them illegally
And be aware these “cool mods” they use aren’t always that cool
They’re usually pretty rough around the edges
They’re good enough for playing around with
They’re not dev quality
I really don’t see an issue with decent mods, as long as they’re free
Of the car drives good and looks good I could kinda care less how it crashes
Same
Would anybody be able to help me with a skinpack? I already have all the textures, I just can never figure out how to actually get them to show up in game.
<@&710084482031550547> this guys a scammer btw, and he’s irritating
On it. Keep these screenshots here for a sec so i can refer to them.
Ok. Also, just check #mods-discussion bud here is discussing pirating mods, i believe thats a rule violation too
Taken care of.
Ill look into this one.
Ok ty
I do apologize I am operating on like 2 hours of sleep
And wasn't paying attention to what I was saying
I'm like trying to apologize twin
Ok 🤷♂️
Either way you’re taking a modders hard work for free.
If I told you I'll pay the 12 bucks to make up for it would that work? Not rn because I've currently got 11¢ in my account rn but yknow
Whenever I get paid I suppose
Like I said my hours are wildly inconsistent and all that
Idk, thats a discussion to have with RLS. Not me
I just get pissed off at people who support leaking, as I know the effort and money that goes into modding
Well I guess I'll talk to them about it
I sent raceless the apology so we'll see I guess.
nah, depends on what mod mainly
well they warned him for it so 🤷♂️
more for the other stuff
paid mods are at best a tos grey-area and at worst flat out illegal, so... prolly dont wanna bring more attention to it
IF they were a grey area there wouldnt be tags for them on the discord and allowed on the forums
allat illegal stuffs bs who cares
companies dont do shit about it
either way, it seems to be taken as against the rules
I don't see how paid mods could be illegal?
Selling brand labels
not many people really want that
I want my irl cars. Lore friendly is cool but i wanna crush something i have driven irl
Yeah I do enjoy irl cars
My bad for wanting irl cars in arguably the best driving game to exist lol
I wish there was a gbody mod, I really want my Monte Carlo ingame
^ This ^
they currently depend on game tos's. Beamng devs haven't yet taken a stance (against them), so they are fine.
CDPR with cyberpunk for example did take a stance and taken down the vr mod for example.
Microsoft MSFS for example is for paid mods, and they can be very expensive (also bedrock minecraft....)
Bethesda also supports them with the creation club
Assetto corsa evo i think will support them in future (will def be paid knowing where they are going with the game)
Hi Guys, my mod has been approved on BeamNG forums.
It is a Traffic tool that lets you customize your traffic vehicles and spawn them in game to be used as traffic.
Please check it out: https://www.beamng.com/threads/custom-traffic-in-beamng-–-new-traffic-builder-tool.108641/
yeah thats my point, devs havent exactly taken a stance, theres some stuff in tos about "only for non-commerical purposes" but beam so far hasnt taken any action so im aware, its more for safety
The price of stuff in msfs has more to do with the fact its a flight sim, there’s a certain difficulty inherent to developing anything for those games
Hey guys I previously made a car mod on blender and I'm currently trying to get it into beam but it's not working idk if it's the jbeam files or json files I used chatgpt to make is there anyone who can help me to get it working it would mean a lot thanks
how could i change the sound files of cars (i wanted to do irl sounds for a few cars) but i want to add a new engine
i already have the sounds
i just dont know how to add them to beam
Hey, today I'll be showing how to modify engine sounds in BeamNG.drive in 4 different ways! From just swapping out for default sounds, to sampling real life car sounds! I really wanted to share these methods with you all, and I hope you have fun making these like I did!
Sound blend creator: https://github.com/ZilverBlade/Sound2sfxBlend/releases...
any smart modders have time to answer a quick, probably stupid question
don't ask to ask
In the Career mode with RLS i grabbed myself a MD series truck and used the racetab engine adapter to swap the engine out, i got the engine running and everything but it seems like no matter what transmission i throw on it it just wont move, doesnt seem like the driveshaft is even spinning either. Im wondering if i need to just use the racetab engines with it or if i can indeed use the engines from the cummins pack and im just doing something wrong
anyone know of any good toyota tundra mods
hi guys
Please send me a 3D model of the spike posts without static effects for BeamNG Drive.
never used rls, but there's a ui app called "powertrain", in there you'll be able to see where it's not connected. Though it can be a bit tricky to understand, good luck
is this something in the default game as a spawnable thing? if so, go to Steam/steamapps/common/BeamNG.drive/content/vehicles/ (in steam, you can right click and inspect local files). Then you can try to find the accompanying zip file that contains all the related files, including the .dae file (the newest versions of blender don't accept dae anymore, so you'll have to use an older version)
Not this is vehicle
thanks
Gave +1 Reputation to @brittle warren (current: #7 - 288)
Thanks again cause ive been looking for tutorial
Gave +1 Reputation to @brittle warren (current: #7 - 289)
I'm trying to add parts to a mod (Exhaust and transmission from the Scintilla GT3 mod), but i don't know which file i would need to go to, to add said parts
I think it would be pretty easy since the mod (Engine mod) uses the same model as the GT3 engine, so there shouldn't be any issues
Also this is strictly for personal use only, so this won't be published or anything
working on a app that some crash Youtubers could find helpful 🙂
please censor the name of those people
-# jk
u confused me lmao
i mean c***h youtubers
the worst part of beamng
make slop and attract children
true, 1 person I dislike is WreckNGeeZ. he gatekeeps his method of making wheels detach on his dumb patreon which made me make the app.
grifters grifting the grifters
good on him
@ebon tangle is trailer modding easier than car modding? In terms of learning curve, like could I pick it up quick or would it take me a long ass time, I can learn decently quick tho
Been wanting to make lots of trailer mods
tried both?
full car ofc is harder than full scratch trailer
tuning kit for car is easier than full trailer
Uhhhh id say its easier then doing a full car cause theres just less to do
The chipvan i made is an awful meshslap tho
and theres no drivetrain (i hate drivetrain i hate drivetrain)
I mean custom trailers tho, not like editing ingame ones
ik im joking
I could care less bro it’s a damn trialer 😭😭
The scratch jbeam ive done for my combi was not very hard just too time consuming for my taste
full custom trailer provided you steal the suspension and dont die trying to figure out leaf springs is ez
Yeah its def easier
I wanna do a jeep n better lowboy at some point
But i think the devs will do a US style lowboy at some point
If you do xj I can provide support with progress 🙏
I can do materials and jbeam i just cant scratch model for shit
tbh trailers do sound like a good way to learn the suspension, jbeam and modelling, maybe openables too if its that type
I was planning on using an ATS model again cause they arent hard to work with and the topo is ok
Not that kinda jeep 😭
Ats lowboy would be sick bro
The 2 piece ones
do they also death wobble at highway speeds
i mean they're carrying like 100+ tons so i hope not
can anyone give me some good car and trailer mods
They’re probably one of the most high tech trailer related things you could ever get so probably no
And the cargo they’d be carrying they’re probably not getting over 60mph
hello guys im new into BeamNg and i need some helps to download graphic mod or better what is the best graphic mod and can somebody send me tutorial how to download it?
small showcase of the app
Does beammp need more processing power to run smoothly like with traffic? Or does it run (somewhat) smoothly with a mid-range GPU and CPU?
It’s all based on your pc
BeamNG and beammp run the same performance wise
thats pretty cool
Thanks!😊
Okay thanks! So if it runs fine on freeroam with a few cars, it will run similar on multiplayer?
Gave +1 Reputation to @crystal wraith (current: #158 - 35)
Yo this is sick, I can't wait to have a PC that can run this! Its funny, I was looking for a keybind that does this, but it's super cool that there's gonna be a mod for it soon!
like i said, its the same
Okay cool!
u can also do it with a lua trigger in world editor for video making 😉
someone can pass me all of his mods? i just changed my pc and i lost every mod i have and im too lazy to search them
his?
oh im sorry
but u can?
Uhm no sorry I dont know many mods
k, no problem
my apologies
So guys im happy to pay, id rather not but i own a mazda 3 bk sedan and id love to see if somone could make one for me for beamng, so long as its the mazda 3 SEDAN BK, id be so so so happy, or if anyone knows someone that would make one, its my car irl and id love to play it in game aye
Mods take 6+ months to make, you think anyone is willing to spend that time for 0€? Either be lucky that someone that has the skills wants to do it(probably not because it's a boring sedan) or do it yourself
does anyone know mods that make the game more realistic? not visually. but just more realistic like for example how the mod Better Windshields makes it more realistic
hi I'm just going to try use the basic mods and is there a mod that adds timer to screen that i can use for chalenges
He said he pay
if he said "hed rather not" id imagine his budget wouldnt be hunderds or thousands of €
since i got no reply i found out that steam has one seems like it
Maybe he tried to say „id rather not own a mazda 3bk“ 
Someone please
in the time you waited for someone to reply you could have just redownloaded them....
Just found my favorite mod E V E R. FP's trailerpack contains THE SINGLE THING I HAVE BEEN LOOKING FOR! The crusher trailer is A W E S O M E. No bot, proof: MrBeastNG.drive
???
Found on Modland (Cuz ofc it is)
Oh the stolen one you downloaded leaked and are coming here to brag about?
https://www.patreon.com/posts/fp-trailer-pack-150178915
Support the author. Its not hard.
Did not know 😄
I would buy it if it wasn’t a patreon subscription
But im not gonna bother with either way of getting it
Hello! I would like to ask the members of the group a question. I would really like to see an Opel crossland 2021 in BeamNG, but since I am a beginner, I can't make it. Would anyone be willing to make it for free? Thanks in advance for your answers!
no
mods take a long time to make, if you want to have a car in beamng your best bet is to just learn
thanks
Gave +1 Reputation to @tacit halo (current: #28 - 130)
🔥
Hey, does anyone know a Mod for the Touran Type 1T ? (2003-2006) its my personal car, and id love to drive it in BeamNG
Is it easy to mod beamng drive
yes just drag and drop into the mods folder
The interior camera mod doesnt work, I can't switch to it and it just switches to the default driver cam, what do i do?
Is there a mod that adds license plate slot to any vehicle on spawn?
Are there any good mods for like police chases and stuff
That you would suggest
not that i know of
Enable the camera in the settings
Read mod descriptions ffs
Check the vanilla cars' jbeam files 😄 usually the license plate slot is on the bumper or trunk. Then just copy and paste that to any car you want
Yeah yeah, ik, ty, sorry. I meant like... to ANY ANY vehicle, with a hotkey or just as a mod that automatically adds a license plate slot if it doesn't already exist in the vehicle's JBeam (if the vehicle is about to spawn, stuff like that). Without the need to edit any files manually every time. @full wyvern could probably make us such a mod 🙂 🙂 🙂
Gave +1 Reputation to @blazing harbor (current: #915 - 4)
True, but that would need an adjustable slot position too
hello, can you help me download mods such as realistic cars, e.g. BMW, Audi?
how do you tackle placing the licence plate automatically where its supposed to tho?
I dont think making jbeam on thr fly is even possible
that too
But of course hes completely ignorant to any of that and pings a dev
at best you could maybe make a front/rear combo licenceplate adjustable with variables in the tuning thab that uses the vehicle_mod slot
I just need the slot to appear in the Vehicle Config menu, I don't need it to be visually present on the vehicle
oh i see
uh each mod has whatever slots they want so you cant just force them to appear
What up to date basics to advanced mod tutorials would you guys recommend?
I was following one but at the first step it was outdated, my next plan is probably to binge filman86 videos
Idk how good filmans are
I mostly used the wiki and the base game cars as a reference
Fair enough, I’m thinking now the best course of action is to just follow everything in the Beamng modding documentation
Yes there are almost no good videos. MorzBNG has some good ones tho
That’s the ones I was following but I found the very first part of the series was outdated
The only thing thats changed is new features? Like everything else is exactly the same. Well and the mod folder location
I did the first bit and kept getting “mod outdated or corrupt” I sort comments by new and see a bunch of people saying the same
<@&710084482031550547> sorry for ping but
Thanks
unless that wasnt them and the poster removed so that I got in trouble
think our bot detected their spam, as they were posting in numerous channels. no worries!
Alright
Best free bmw mod? Or any diesel truck I literally just got beamng it's sick
Chat when April fool arrives, I want to see ERROR model from Source Engine trust
troll
Is it possible to apply downforce to flat triangles through lua?
Currently messing around with getting ground effect in beam
In the sense of does someone know of an example
not that i know of
you could always just jbeam the diffuser as a ramp to brute-force the effect
I want it to be a bit more advanced with optimal windows etc, ill just look at how the trabajano did the static downforce
Trajano
I’m surprised that nobody has made a hirochi commercial truck yet.
So that made all the difference, I was able to simulate a blowover too
when I increased the front rideheight
I know this isnt the car to use for ground effect nor is the suspension stiff enough, this is just a proof of concept. https://streamable.com/meniyv
you can see the operating range work too when the car goes uphill for the first time
can-am?
917k
Not a kie truck. A big boy medium duty commercial truck
anobody willing to help me on making a traffic pack?
Is there any possibility of updating a jbeam from within the game in BeamNG with a Lua function instead of having to manually go to a jbeam file in Explorer to edit it (to add a slot)?
I'm trying to get into making liveries, I've got the UV set up on paint.net and just wanted to check I'm doing this right.
you just put the design you want right ontop of the map?
does anyone have the crash falls map by spealer?
i meant if anyone can share the map file?
No thats theft and piracy bro
i cant access patreon cuz its banned in russia
id buy if i could,but russia is so sanctioned rn that i cant literally buy it
i have the money
learning blender so I can learn some beamng modding 😄 
Ypu could try sending the money to someone in the UK and have them gift the
cool :3
cant even do that lmao
im that cooked
russian cards cant do that since 2022
thx
Gave +1 Reputation to @sturdy gust (current: #2064 - 1)
Ypu can try dming the creator and see if they would upload to boosty or something
anyone know a good blender tutorial that would help me figure out how I can make this?
Mine sucks compared to that lol
i modeled it in school when i was bored like 4 months ago
the ultra high quality google photos for the metal bit that cant be seen and the badges/stickers i did today
That looks good im embarased to show mine lol
Mine is way to high poly too and no rear enclosure yet
shes not lowpoly yet
"but this mod is very detailed and high quality"
the unoptimised pos:
Oof mines only 1300 faces lol. But way less detail
not aimed at you ofc lol
Has anyone made a mod that reconfigures the g29 to the right key binds
anyone got a good silverado or GMC sierra mod
nothing there
he means dont ask in here, its the wrong channel. ask there
i know of a few, but only paid and idk about quality
anyone know good IRL racetrack map mods? like daytona/the ring etcetc
this channel is for people who create mods and ask for help creating mods
I got bad news, you repeated my mistake... Mods discussion is for finding mods and the such.. this is for mod devs
So I'm new to blender and making a rim atm (for beamng). I just need help with what would be the best way to make adjustments to my model so this go up sideways and make the bend be more "harsh"?
Bevel, but I’m not a pro blender user so take that with a grain of salt
Alright, will try!😊
Dont know if you got it or not but check out the spin tool and shear tools they are very useful
Will do! Thank you! 😁
Gave +1 Reputation to @brittle warren (current: #7 - 292)
My current progress:
right off the bat, you have some ngons which are bad
it should be like this instead
not perfect like that but basically every face, when modelling should have 4 vertexes, which is then simplified down into triangles
or you could delete this one too
Greeting everyone! I am looking for someone that is willing to work with me on a project i am working on about custom missions using flowgraph. I need someone that knows from both lua and flowgraph. For more information, i have made a post in the forums with the project name "Actual RaciNG". Thank you for your understanding! 🙂
Deleted it, thx mate!👍😁
Gave +1 Reputation to @unique zealot (current: #63 - 82)
Not entirely sure if this is the suitable channel to ask in, but how could I get the verified modder role? I’ve been told to do it on the official website, but where?
wait that what you mean or like?
Som wanna stard a shop i have a dc
Nah. I have #1102973298222051358 access already
ah
Som wanna stard a shop i have a dc
so like this guy a good modder kinda role
Actually nvm i think that roles for YouTubers and shit
“Verified content creator” role
Ya thats youtuber I think
Som wanna stard a shop i have a dc
You don’t need to spam your message people will still see it 😭
Tf do you mean shop and also SHHHHH THIS IS MODDING.
Mod shop
nope nope nope nope nope
Ok
@latent sigil wsg matey
Nah
where do yall get mods
remade it, current progress:
modland
Ew
last seen was sum like 50, i dont think i'm using them all tho. before clean was 107
why ew thats where i get all my my mods where do you get yours
the repo and the forums, modland is an unmoderated shithole to put it short
your poor pc
Bro now has countless Trojans and slop filling up his pc
Just use the official repository and forums please
I downloaded modland 1 time
and I checked so many places to make sure this one was safe
it is hapilly but I was still scared
is this a channel i can ask on how to find a individual mod?
Asking in #game-discussion-1 might be better
ty
Gave +1 Reputation to @neon crater (current: #1 - 650)
sorry, i've buried it a bit
i know this might not be the correct place but i wanted to know the quickest way to make a 3d fixture in automation or add said model directly to my mid
Hello everyone! I am looking for someone that can help me on a project i am working on. More specifically helping me create custom objectives for my flowgraph mission. Need someone that knows from both lua and flowgraph. Thanks in advance! 🙂
Anyone interested please reply here first. Do not DM me, i would like to confirm you are not either a scam or a bot. Thanks.
i changed the .dae model but now the car is just invisible
anyone know the problem?
did you put the transforms to the middle?
press a then press ctrl+a
then press all transforms
i did that now but it looks like this ingame (no img perms ill dm you it)
Click this emoji
oh thanks
I have a problem. I made a mod that changes the Marshal's wood interior trim with carbon fibre. I used the rock climber/rockbouncer's material for the carbon fibre. at first the texture is loaded just fine. But when i restart my session, the texture wont load. I have to load the rock climber into the game first, then i load the Marshal. Anyone know how to fix this?
That will always happen since the material isnt in a common folder.
You will need to copy the material and rename it and put it in your mod
How do I make livery’s for cars in the game
that includes redoing the material reference in blender?
No you can leave it if you want
anyone know if there's a common .dae for switches, buttons, etc? I cant seem to find any in generic_racing_interior.dae
What vehicle?
its prob in the default dae
But are you looking for any in specific
cause its most likely in a normal old dae not the common
i need killswitch, switch that has like a cover on it that automtically turn off when flipped down (i forgot the naame), regular switch
btw, where can i find fusebox dae?
man, is there really no boost gauge anywere?
chat how to make a rebadge car?
can SOMEONE test my mod?
how do i make so that the car parts are lighter, like the fender etc
what version of blender are you using?
i wonder will i ever be able to code in C++ for mods
this is what im saying why dont we get a library or something
Im confused its just lua. Lua has library's and modules and ypu can do anything really.
ray tracing on lua is a hard no you know
a library that translates C into lua?
no, something that can directly interact with BeamNG made in C++
its not easy to make that
just learn lua
i already know lua i am just simply not ray tracing beamng using lua
like its not that i dont want to its that it would be unbearably slow
3 fps max, especially since lua runs entirely on cpu
doenst beamng already have ray tracing for the tech version of beamng
only vulkan
i see
what does the ccf use then for the ADAS stuff
that isnt horribly slow
nah thats acceptable its not slow
but imagine throwing rays all around the scene using a runtime language
yeah
that would be really unbelievably slow
still being able to write c doesnt mean you can run it on the gpu right?
i mean but like the game would need to change a lot just for that to work
i dont think so
unless the vulkan version is just a swapchain ontop of the dx11 version
then yeah i dont think it would
Thats raycast iirc
Yeah ray tracing is specifically for graphics
raycasting = the ray checks if theres collision
ray tracing = the ray bounces multiple times (like in real life)
So ray casting would do like
Better collision for crashes and thus more realistic crash physics?
Am I getting this right
no
some games use raycasting to check if the player is on the ground tho
Oh
Just for like basic collision detection then
yes
I see
I wonder if there'll ever be a time where beamng becomes outdated in terms of realism and crash physics
maybe.
It's definietly outdated in terms of graphics xD
Not in our lifetimes though
But i bet they work on that in the future
Not if you turn everything all the way up, but most people can't do that so yeah
Looks better than most modern titles on ultra
I can tho
Rich
I cant 😭 im on low
ouch
there doesn't seem to be any direct competitor to beamng currently
There probably will be eventually
it will never be outdated in terms of crash physics, its evolving everyday, https://beamng.tech
its honestly fascinating
how can I get traffic in the game?
Click e to enter the radial menu then click to the farthest right option then click on the top traffic then click spawn traffic
No not really it is bad with graphics optimization if you have a 3080 or wtv the game can look stunning.
How do I add dummies & more cars in ai traffic? (Also dummies in the ai traffic cars)
its weird because i deleted every mod and now my game runs like shit
I have a 3080. But that does not fix the missing GI and noisy shadows
The zeit graphics mod has global illumination and some other bits
The noisy shadows can also be changed in there, they still ain't perfect
So I just finished fixing th model in blender
So should I just export it in form of dae file to the folder made for it
Well that explains it
https://www.beamng.com/threads/agents-simplified-realistic-traffic-mod-eu-jp-released.102034/
dummy mod and Agent’s traffic mod
Guys, where can I get the "DH Super Gnat" for myself?
I want to get into beamng modding, whats something i should learn first or do first, as well as any general tips
That depends very much on the kind of mods you want to make
this is probably super advanced but i wanna make some lore friendly cars
Alright sure, then you want to learn modeling in blender and how jbeams work. Luckily the documentation has a tutorial for you
you know where i can find that?
First result on google really https://documentation.beamng.com/
alright thanks a lot
Dive into the graphics setting a bit more not that beam has basically added car killers graphics settings into the base game you can actually fix it.
I was also able to while on vacation use my 2070 super laptop to get sold 1440p 60 graphics
can anyone tell me how diffrent jbeams connect to eachother?
Beams
hope this helped (Im still new to tho)
ohh thats how, thanks!
Gave +1 Reputation to @patent jackal (current: #1127 - 3)
i though you needed some type of support nodes
so... how does one make a skin/livery for a vehicle...? i want to find the base dds file and edit it via Paint.Net but i can't seem to find it
which vehicle
any of them... rn wanna do h-series
C:\Program Files (x86)\Steam\steamapps\common\BeamNG.drive\content\vehicles\van.zip\vehicles\van
thanks
Hey guys. How can I find the config name for the flex r dual spike strips to use in a json file?
Hey guys
The light here isnt inside the headlight
So I want to change th coordinated to inside
But I dont know which one represents the light coordinates
i have 160-170
HOLLY MODS
how many more do you think i can put in the game?
I have the SPA map mod, can someone help me set up a race like we can in other maps?
can some one he;p me get started on bulding cars?
I’m currently at 400+ and my game run just fine
is there any bmw m3 m4 g80/g82 hood exit mods?
Look, ik people use private mods in Beamng videos, But I just wanna swap a DMM512 with a P42DC Locomotive? If people privatize their model, at least teach us how to mod trains in Beamng.
Screenshot using windows shit plus s
Shift*
Ah okay
i wonder how many etk up to date mods there are
?
Oh no
I really couldn't say unless you dm ed me the mod for me to diagnose
try console and send pic if havent sent to them already
hi guys i want to buy a plane or tank in beamng career mode (rls), i have all my plane mods on as well as my tank mod but they never come up for sale normally. is there somewhere i gotta look or is there a way i can mod them into my inventory or whatever?
are they up to do date so they are included in career?
if not then you wouldnt be able to buy them, also #mods-discussion
hmm maybe
it’s also maybe in a different category than cars
like in objects
cuz u wouldn’t see a haybale for sale
so it could be the same concept yknow
Sorry
hi guys, how do i import a json master spline ? i see it in a tutorial but the button to import a json is not here can someone help me pls ?
oh it is a mod that do that nvm
Cab anyone tell me how to fix this
Is it the Honda city mod ?
No
Finally worked
please, take screenshots instead of photos
Win+Shift+S
looks good but dont forget about headlight
a missing texture can turn a mod from a 10 to a 4
fire bro always good to see a modder who puts actual effort into bug fixing and crash testing
This was actually a good gta mod pack but no textures so Decided to fix them
I had to use chatgpt and compare the buffalo jbeam to understand whats the matter
thats fair it happens, chatgpt is a very good troubleshooting tool
Like it does get you into right direction
its not perfect but it is helpful
The rest of the inside jbeam requires the understanding of other mods functioning
Hmm
whast
Huh
is there a possibility of a ford mustang shelby gt500 code red
can anyone make a 2015 toyota tacoma for me
it was my grandpas truck and he died a few months ago :[
can anyone recommend a good tutorial for making skins for the vehicles?
got this issue on everything
😭
Hello, so i wanted to make an 2.5 boxer engine swap for the second gen pessima, It shows in my mod tab, mods folder both packed and unpacked version, i have anything correctly done in the Jbeam files, but for some reason the engine still doesn't show up in the parts tab, how can i fix it to make the mod work?
Why is it packed an unpacked at the same time?
Cause if you do both then its always gonna work 👍
No it will never work lol
I tried first with the packed, and then with the unpacked, but both methods did not work
What did you do did you change all jbeam names if not it will think the part is another part and only show the 1
I was making this mod with a help of an tutorial, so i did every steps according to it, and speaking of the file, it has the correct name for it in the beginning of a Jbeam script, but later it has "sunburst2" mentioned in couple of the places in that file
Well you didnt change the slot type you also have random jbeam at the top of the file the mid-size engine swap part does absolutely nothing because its not valid jbeam at all
Probably
Just copy a stock engine and rename the slot type and jbeam name its that easy
I love modelers
I fixed it
people need to do there job when they give assets to others
lmao
how is this looking
Pretty unique and I mean that in a good way
Its first time this shit working
Yeah
I just downloaded the model
Btw its looks kind of goofy like not shiny
Multiple
Try reusing the materials from pickup
Like how
ill show just got boot blender
Ok
Click red circle click on the material that you want to be pickup skin and rename it pickup
then in uv use the pickup main color (Ill send in just a sec)
MOST of the white is where the pickup color will be
Here is the png that you can use in blender
Is it like for bravado bison?
In blender yes.
Where did you put the verticee on the thing
press a in the right window and u in the right window
the do perspective ig
and shrink it down to fit in a little white area
Should have put the keybinds togother mb
Ok a menu came
I did now
Then in left you should get the object something like this
The orange is my object
ye[
put it where mine is
not exact just generally
and maybe make a little smaller
uh oh what did I do wrong
You 100% should not unwrap a model this crooked it is also overlapping the uv like crazy
hes gonna say something
oh ik that I was just showing him how to give a general uv
mines going to change dw
Use mart uv project it at least stops uv overlap lol
I placed
What should I use as the frame
alright export the dae and hope it worked
it worked
for the material or the object?
material
Yes change the material name to pickup
leave the uv name and the object name only change uv layout and material layout
no need to change?
the material name?
nope only change name of the material
ya
does anybody have non paid motorcycles that isnt the hirochi outlaw
That good or bad
Gave +1 Reputation to @patent jackal (current: #705 - 6)
The bumper which was supposed to be white also got red
Because they share same material
How to separate those materials?
Ah
You want the bumper to be white?
Replace it with new material
not pickup call it like white or something for now
and keep it default uv can stay
im gonna eat rn thats why im not responding not cause im ignoring
ill respond in like 10 mins
Ill be back to respond in a bit
…you mean chrome?
I see
Does anyone know any good 5th gen Camaro mods by chance? Ones with the rally stripes to giv it the Bumblebee look?
Theres these. or make your own but materials are a pain in the ass lol
nope, also #mods-discussion, this channel is about making mods
uh oh
this model is dangerously high poly
like worse than beefys silverado
That bad
Mb
bison?
Nah my corvette
I see
MY riviera is like 3m polys just for the shell not dorrs and shit just the shell lol
Can anyone tell how to fix this jbeam
my pc sounds like a jet
adjust values
theres blender plugin
and no I wont help get its a pain in the ass for no reason sorry
As you see the pickup bed jbeam is too stretched
ye
I literally like didnt study 1 week to make this
The jbeam needs edited wich will also mean you need to edit the tailgate jbeam and taillight jbeam all at the same time
I know but how to do it
Like I cant delete anything random
erm
Either by hand with the jbeam file itself or download the blender jbeam addon and edit them in blender. But the addon is pinicky.
Pinicky?
Thats where I have to delete the rest of the useless nodes
But Idk to be true how jbeam works
You dont delete nodes or it weill stop working all together lol
Then what should be done
I dont have that much time
Then you will never make a mod if you dont learn the basics.
Uff
This shit is hard as fuck
It is hard but rewarding once you figure it out
I shoulf ask chatgpt for summary
Sounds like your trying to delete thousands of text documents lol single files take longer than big files
NO!
Dont
Its 23gb lol
Trust me i use ai but dont ask for help with jbeam it doesnt know shit even if you tell it exactly what to do
Ive only asked for simple things like what is the name of the exhaust that goes to engine from the pickup
nothing bigger than that really
Tho with lua thats a diffrent story and I still got nowhere
Right now my computer is freezing
how 😭
I use ai to fix syntax errors with my lua and rust code lol its very good at that
What exactly is this ai doing
free and local or?
Its tasting the snozberries its important for beamng modding
just free lol no strings attached it is a chinese ai tho so be warned your data may be sold
like data I give or data it will search for...
how sniffy you think they are
hey folks im really new to beam.ng and i want some mods of like licensed cars but i don't really want to risk getting a virus so i wanted to know what the safest website is
Well seeing as it has access to your whole pc probably anything
How did it taste
oh. ya im good for now
sorry i didn't knowh which channel to use
Np
#mods-discussion And ther is a list search in discord irl car list or something
My computer is hanging as fuck
Is this blender addon?
no
why the tire tilted?
press tab and a you will see taht
I thought you were fixing jbeam
nah hold on ill show what that looks like
Sketchtab?
Correct
Same
Its sketchy fab
Gta models
Yes
I gotta divide each panel and unsubdivide by myself
like inspired or pulled? Cause if pulled im gonna try to avoid helping (Legally ill still help tho lol)
Select all the in edit mode select all and click shift or control p and split by seperate parts
The model was there and decided to download
honestly its easier cutting your losses and modelling it from scratch
Modelling is difficult
Seperating models is trash lol
ik how to seperate I just have todo it all and its seprate parts are not correct
everything is difficult if you dont practice, modelling is no different
nah I like to have a good base that I can just adjust and stuff
but unsubdividing might make me give up tbh
sorry if this should be in discussion, but modland's antivirus scan is trusted right?
NO
modland isnt trusted also #mods-discussion
balright
You cant scan for viruses in java script and lua
if modland is in name its not trusted
Although there are old mods lying in modland I am fixing
i didn't know modland is like voldemort sorry folks
lmao
you do you but you should try it eventually, making one from scratch
Its alll stolen mods and shit lol its just bad
I take these so I can learn the moddeling I have lots of thing I plan on making from scratch
It takes a lot of time too
I actually tried modelling once
But shit is hard as fuck
practice
Modeling is fun imo i can make whatever i want staring from nothing
its not THAT bad
And the problem is I dont have that much free time
I didnt do college study for 1 week
To work on this bison
One of my favorite models i made
im gonna restart pc its being slow ass balls
Mine stopped totally
Btw I heard that one of the modland mods got gore
One of the recent ones
It did i belive it was removed tho
Yes it is
Although after people reported
The admin for modland is actually kinda cool but hes one person so he cant verify everything
Because it was there for like 3 days
I think he should get some more people
To make modland trustable
Like IRL people gore?
beamng try not to fucking break textures challenge (impossible)
Yes
ew I dont like anything outside of my computer
I know that pain
Everytime i open the game something of mine didnt save lol
theres no reason to trust it, real cars should just be posted on the forums instead
Although its rare
Some cars are shit there too
Like there are few mods which are shit as fuck in forums
I mean shit and containing csam or viruses are very fdifferent
nah like in a gamer way ofc im gonna be disgusted by real gore tho
Yeah
I have downloaded old mods till now and got no virus
Its ok
I dont like gore either
Why is my .blend file brokey (Slow) it was alright before
Click the file button and click purge unused data it probably has a lot of random shit stored
I remember one of the guys who was a modder and made shitty mods
whats that vulkan menu called where it shows the red or blue depending on the density of the model
like bro why
He used to send cp in discord
Does anyone know any good 5th gen Camaro mods by chance? Ones with the rally stripes to give it the Bumblebee look?
it had 5 data blocks
I dont remember but i think it was either talkingbath or the other one who posted it a while back
bruh we told you already
My dumbahh
discussion not faq
yeah it was
Oh ok
do I even wanna try
easier remaking it from scratch
Btw do you know how to import cars from gta to beamng
illegal
where is the multiplayer mod?
Like the models to blender
search beammp
A lot of modders do
still illegal
Gta doesnt care
@proud solstice hi whats that app that shows the model density either blue or red in vulkan
I think it's somewhere in the vehicle editor
This isnt that bad Doing the flat part

Holy Trinity
?
biblically accurate mini
Nah the french
spikey
Disco car
5️⃣
☁️
🏙️
Thank you
Gave +1 Reputation to @unique zealot (current: #60 - 86)
start with plane or cube?
plane
and get refrence photos or wing it 😭
both
yes but keep in mind they are never 100% accurate and only for reference
so something like this with each side?
more than 1 image at once ofc
ya but Im gonna start on side then add others in dont wanna bite more than I can chew
make sure to use the mirror modifier
why do you have a toilet plugner looking audio thingimajig
what is that meant to be
I am thinking of copying the pickup jbeam into the already bad jbeam
Car
hmm I think its aligned good
this would be so much easier with another monitor
Where should I go from here everytime I try something it ruins it and I just go back
and it looks nothing like a corvette
kinda looks like a Daytona
Would be much easier todo tbh
but no
i hate to break it to you, youve made the first mistake by drawing the outline of the whole car
it doesnt work like that, for beam in particular, you model the shell then the panels & the drivetrain
nah im gonna split it after I want shape first
without 10k polys where there could be 1
Please watch a car modeling tutorial
alr
Yo don't do the outline then split it
You can start modeling in many places, I personally always do the roof and then go down
Treat the glass as a panel not as glass
should I delete the one I made or edit it
Bass knob lol
So I do this and then I go to another axis?
(Hood)
not whatever this is
like what lichi said, i would advise you to watch a vehicle tutorial
that was a quick loop cut
this is what it said todo \o/
post the video youre using
In this first episode of the McLaren Senna GTR Modelling Series, we're going to model the hood of this incredible supercar 🚗💨!
In this video I'll guide you through the process of shaping the basic form, adding key details, and refining the edges to get that perfect fit.
Whether you're new to Blender or looking to improve your car modeling...
Its got an annoying ass ai voice
so how did that loopcut get this result
Right there it models the edge to edge of hood and then moves to second axis and adjusts
The loop cut curved like that
are you using subdivision?
use subdivision
you can delete some of the loopcuts, it'll basically fill it in
do yall trust modland
#mods-discussion and no
can remove a bit more but now do I swap axis?
you swap them throughout, not doing one face at a time
Hello
There's an engine mod for the old T-series, and I have a truck mod that uses the same truck's engine; they just changed the JBeam file name. What could I do to make the mod compatible?
The mod uses a Cummins engine, and it's already compatible with the old T-series, but I want to make it compatible with the other mod since they use the same engine, just with a different name!
#beamngdrive #tutorial #modding #cars
Always wanted to make your own beamng mod but ran into boring and overcomplicated tutorials? Here is a quick and simple tutorial to get familiar with the workflow of beamng modding. In the next tutorial we will change transmission and exhaust so don't miss the new video)
the principle is the same
Thanks broo
and just a bit of advice, dont post the exact same question in every modding channel, it gets real annoying real quick
Oh, right, I just didn't want to be ignored, but anyway, the tutorial wasn't helpful. I followed the whole procedure and it's still the same; the mod doesn't work.
hey do any of you folks have a bmw m car mod? the forum doesn't have one that works
Anyone of you know the name of the mod that goosiest uses sometimes?
Like that random car generator one?
Anyone knows if inside the json file for a licenseplate mod, the line "patternData is mandatory to use or I should be able to remove it without any issue? {
"name" : "usernamemod",
"version": 1,
"data": {
"gen":{
"pattern" : "%c%c%c-%d%d%d",
"patternData":{ "nb":["A","B","C","1","2","3"]}
},
does anyone know why my tire does this? i fixed the no texture but one isnt far enough then one is way out there
Mod? also got no idea
(What mod or you making)
Is it that paid one?
The bison jbeam is a nightmare
you should usually model much lower poly, but use subdivision modifier, no?
idk im like a week or 2 into this
Subdivision is bad for beam unless your baking to a low poly mesh after
and most of it was editing other blends
if you keep it lower poly, it should be fine
its been quite a bit since i've modelled vehicles in blender (not for beamNG tho). But i do think modeling cars withouth subD is masochism
Its the fact that you have to think about the jbeam you cant have any dense areas in one spot and you cant have large spots with no jbeam close subdivision is okay but you would need to go back and adjust after to make sure your mesh deforms right.
hi, anybody here a skilled modder? or non skilled, as long as can help me out a little bit. the t90 tank mod is broken rn but I think it seems easy enough to fix. the machine gun has no keybinds to fire or turn or anything but there is customization, so how would i find the callbacks to acctions to fire the gun and add keybinds for that?
free to dm also
Look for an input actions file and the lua that responds to those keybinds would be in there then you can search for those functions i nthe lua
Thank you! What would the input actions file be called?
Gave +1 Reputation to @brittle warren (current: #7 - 301)
something.input.actions
hello guys i have one question
i cant seem to find it the closest is an inputmaps folder with keyboard.json in it, but theres no callbacks to functions to fire machine gun or anything
Edit: nevermind i found it
i cant send photos
ok so now some of my keybinds are working (smokebomb) but the machine gun still isnt working
i think maybe its cuz it has no ammo or doesnt know the command? idk tbh
Hi, I wanted to create an itasha, but I also want to paint on glass. I tried using blender but i think uv maps are messed up (i have no experience with blender so I dont even know what i'm doing). Do i have to brute force it by aligning art on windows texture separately to fit with main texture or is there a method with blender? Do you know any tutorials if they even exist? Or maybe dedicated discord server?
does this formatting look right?
It works a little bit
But I broke something else in the process
Apparently it’s missing an entire jbeam file that wasn’t a problem before now for some reason
Guys any nice car mods I want dailys
what kind of dailies? on the repo, there's the aria, crosssport, ccf, mistral, centauri...
But also thats a question for #mods-discussion for later info
Yo i have a question i wanna make something really simple as a mod such as like making an engine being able to rev at 12000 rpm
how i could do that?
changing a few values in a jbeam file
or smth like being able to swap an engine from a car to another car model
i think @royal crater has a yt tutorial on that
can i make it as a new engine? like a new option
so i keep all the original ones + the modded one i wanna make
Thanks mate