#mods-discussion
1 messages · Page 111 of 1
might wanna revise the tire textures, otherwise they wont be able to go on the repo
is it possible to have the repo mods elsewhere other than the appdata local folder?
it bloats my small boot drive
The texture are better now. Just don’t have a pic of all the tires in game again yet
It’ll look more like this. But i won’t not put it on the repo sadly
you can move your user folder, the repo mods will move with it
supercharger shit
think these would be cool to see in beam
Anyone have any idea how to replace the turn signal sound on a mod?
Hey, does anyone know if there's a cargo ramp mod for pickup beds ?
Is there even any vehicle that fits in the bed?
Oh true
ive been useing modhost for downloading mods, i havent had an issue but the site is limited.. ive had a go on modland but every mod i choose seems to be blobked by my computer..anyone have any ideas of what im doing rong??
Gives off these vibes.
only get mods from the official forums or repo. third party sites and managers are rife with low effort, stolen, and potentially malicious mods
zero moderation, and there is nothing stopping someone from uploading an “installer” that puts a virus on your computer
@barren magnet arhhhh right i see,very much appriciated been scratching my head for days, i have a few mods to play with for now.. where will i find the forums for the mods
Just wondering, is there a rotary swap mod for the 200BX?
is there a work around for the mirror issue for the d series?
yes i have mods installed but the new update for beam ruined most of them and my camera is messed up, all of my mods are either made by friends or paid mods and they have worked before the update
i dont get my mods from modhub or any other virus activity areas
Has anyone thought of making a tiller truck for in game at all or at least the trailer part
take the windshield out that might help or wait for an update
or change the path for the main vehicle controller in the mod files
Wait wait wait ima try both those
Where’s that at, ima try the windshield first
What’s changing the windshield gonna do
idk but its a fix for dfa and other mods
Yeah that’s why I was asking
It might work if it does ima scream
anyone know what this mod is? I saw it in a video
so my beam updated
and mot my car mods are gone :/
any1 know how to get them back???
lads, anyone know a good body kit mod for the 200bx
yeah it's the wagon version of the bruckell legran
the paint is either old paint or one of the derby ones
barebones front bodywork, i gotta figure out some shading issues (and reshape the lights) but its a proof of concept, gotta learn jbeam now
do i hear an echo in here
does anyone by chance know of a mod that changes the 2-step from gas & brake to just a button?
Where did you have them installed?
Base Exhaust Done ✅ Now to add cat delete options & muffler delete options 🙂
Test Pipes ✅
Hard asf
when i paint the terrain with dirt, its just the texture not really the color changing, any way to help?
Does anyone know how to convert cars to BeamNG
I based them off of my irl COP ignition boots, They look like that on my irl 4.6L
It's not as simple as converting. There's a LOT to it
you cant even call it converting
Looks pretty realistic no need to change them lichi I promise lol 🫶
But why are they there?
Isn't that where the injectors would go
Nvm I saw the injectors
They small af
I shall fix those 🙂
I am glad you are interested in what I do though, Wouldn't be doing all this without your help and knowledge lichi 🫶
No worries
Repo but I figured it out! Thank you
Gave +1 Reputation to @ocean mauve (current: #2 - 216)
Does anyone have the laf car mod?
(slightly better lights and grill)
Looks really good!
I think itd be so sick to have portals in this game, imagine the possibilities
@gritty eagle is the passat private?
currently yes, its in beta at the minute, but not long till it will come out
Ive got question, so something broke my water texture since it keeps on glitching out etc is there anyway i could figure out what it was or do i need to reinstall everything again
and by any chance did i use wrong channel
anyone got a clue why my dirt isnt dirt colored?
also, why is the end of my path like this?
you need to edit basecolorbasetex
and where would that be sorry
eastcoast>art>terrains>t_terrain_base_b
oh in the files?
okay
i have to edit a png file? wtf
i didnt have to do this for the asphalt though...
anyone know how to gain access to show the mods i make off?
@abstract root this?
yup
Or make a file of size 2048x2048 and paint it all in the gray color you want the asphalt in, and replace it in the terrain material liblary
Do you guys know of a mod that extends the cab and bed of the d series?
no i mean i didnt have to do this stupid step for painting asphalt
but for dirt i do?
you probably have to do
kind of frustrating ngl. seems like it takes away the whole point of a terrain PAINTER if the painting doesnt work
if you do this, then everything will work without a problem
okay
Do you know of a mod that extends the cab and bed of the d series?
no
chat where can i go to find someone to make me a mod and how much would it cost?
WIP xD
I've never seen no texture squares like that
Is that by chance a kenworth w900L?
whooo is MAT
his name is matthew and he's decided to say hi through the medium of your declasse sabre turbo
any specific shade of brown?
@abstract root
yeess yeeess im getting somewhere
niiice
hi
?
cool 442
rate the low poly ass model
its a cool cube
11/10
Oh yeah boys we goin back to LegoLand with this one! (jk lol gotta love a brick as a utility bed)
Well, if I'ma keep it a buck, 6/10
is this automation?
nope
oh jeez thats really nice
no
Do you know of a mod that extends the cab and bed of the d series?
yeah add me when you get time ill fly it over
anyone know of any rear mount radiators for d-series? pref not locked to a single rad support but I can work around that
something like this, or even farther back in the bed if it's all I can find
Are you gonna make it so we can download it?
may be a mod interfering with other textures
My colleague doesn't work either
try to deactivate anything you've recently added and give it a restart/cache clear til you narrow down what's causing it
I made skin myself
ooo uhhh
looks like it's failing to load the actual image file of the skin
make sure it's a suitable filetype and saved correctly
Kumbel also made his own and it doesn't have a texture
Jo why
you could read the code off of a preexisting mod that you know works and use that as a guide to make sure you're doing things correctly
all rubbish
I've never made my own skin though tbh so I may not have a complete understanding of what may go wrong
Okay
I'd try to replace the texture image of a mod that works with the one you want to use
so you know the framework around it is verified working, so you can isolate if the problem is with your texture or the code for it
save a backup of the original of course, so you can unbreak anything that may go wrong
Alright, spacers, anyone know of a mod for wheel spacers that still functions. Cause the built in track offset is never enough for nice wide body fitment
I'm running the IYB spacers on a d-series build rn
Do they work for all cars or just the D series
Cause I came across a d series specific mod
I want em on a BX
I'm pretty sure solely d-series
🥲
spaced out is broken and that was what I always used
Ya same
lemme see what I've got that might help
Appreciated 🙏
are you just using vanilla parts or modded suspension?
I don't see anything after a quick check, but I do know how to edit jbeam and allow the slider to go as far as I want
Mostly vanilla suspension parts
Sometimes I'll use molded drift suspension. But for the most part vanilla
I wanna learn to edit jbeam, I can code in like, 5 different languages, still seems hard tho😂😂
👍
Sadly no
I mean, there was a Land Cruiser of that generation in the works, but nothing came out of it.
But it's your mod, and I respect it.
alright.
A j90 prado?
Yeah, IIRC.
Ah
This mod might get a proper remake, fully scratch made interior, frame, etc but im not sure
Hi! can someone make a Rigs of Rods car pack. i think people would love it and is well over do to remaster the old Gavril Bandit mod! By the why thank u modders for your hard work. pls reply if Your up to the challenge!
👍
the reason there hasnt been one is because gabe doesnt want his works made for beam. only the bandit was given permission to be updated for beam
so in short, no
where can i make mod requests?
anywhere but people really dont take requests in the beam modding community
nor do people do commission work
ok well that macks seans. man i wish i cauld drive the gavil omega🥺
so basically no chance i can get someone to make a simple mod for money..
what is it
“simple” in beam terms can mean a lot of different things to different people
highly dependant on what you mean by "simple" and "money"
things can get real complex real quick, so it may not be as simple as it seems. but if you throw enough cash at the right person they'll totally do commissions
A few people do commissions, just depends on what you want
You'll never get a full, properly done car for 50€
It can get expensive very quick
def not, a car can have 20-30hrs involved easy
fully scratch made cars can even bring you up in the thousands lol
30hrs? Wayyy longer
Most cars take multiple months
fair enough, I kinda lowballed the hell out of that
also zeit, do you do commissions? lua wise and stuff
I guess I had a model rip in my mind instead of a true ground up modeling
Yeah
Usually whenever someone asks it's for car screens
i want a wheel mod that lets me use a specific wheel for most cars
i think wheels are simple atleast i hope and the mod should be simple too
Wheels are pretty simple yeah
If you're skilled modelling takes at most 2 hours for the average wheel
it could be easy if there's already a model to import, and the compatability across cars wouldnt be too hard
how much would it cost
ah i was wondering lol just to see if it would be possible to make these two little screens work :D
makin some van and idk, seems like it would add more functionality in it lol
but if you're up for it let me know
You could contact a few of the reputable vehicle modders
yeah see thats the thing its an obscure wheel that quite literally no one cares about, and there is some 3d models
you can pay for but they are for 3d printing for hotwheels and idk if u could import it XD
wheels are one of the few things that are pretty easy to make and get in game
Yeah sure
what wheel is it
DM me
I'd start by asking around in a couple creators channels
dont do that
I can link you to a couple if you need
mecredes alphard
whaa, why not?
or are you meaning their discord servers
yeah discord
okay i thought you were meaning threads
unsolicited requests in threads gets you dismissed instantly
ohhh nah discord would be much quicker and to the point
they would be a little complex to make look natural but not impossible
yeah, i thought so
no one has wanted to do it, havent even gotten a price from someone
Who'd you ask?
some random modders and went into a few servers asking around
i did also make a post on forums but someone said forums are dead and no one will make it
essentially*
I sent you two links to servers I think would be a good place to ask
Where can I find the skin template for the container?
any good silverado mods?
anybody know a few mods for destrucable props and buildings?
i know good charger mods, not silverado ones sorry
I'm rlly looking for any in general, where are they at??
search bullitt in the mod forums for beamng
one im using is the bullitt charger, its gorgeously modelled and very detailed
picture of it in the garage
awesome thank you!
Gave +1 Reputation to @woven crown (current: #723 - 1)
what
oh so it's a scam bot
it's not even discord related why tf is it here 
i think its just a dude
why is vro posting german instagram scams in discord 😭
idk, theres no links or anything
Not a scam, just a troll
worst troll ever fr
is there a way to fix truck mods with broken cameras or no?
no problem friend
Hello. Opee is new here. Would like suggestions on where to mount large caliber machine on top of car.
I am not needing assistance
Want suggestions on where on car to put it
It is not for anything dangerous that would make opee get banned.
Just for clarifying
It is for spreading happiness in the form of large density explosions
possibly the mirrors of the vehicle
passenger side of the car, kind of mad max style?
Oh I am liking this reply
Depends on what kind of vehicle it is
Anyone else know of a mod that makes it so your cameras always have a phantom movement input?
Trying to figure out what’s causing it without wasting 4 hours deactivating and reactivating mods
Fixed it. Anyone know of any good skyline r34 mods?
that is a crazy sentence to read out of context
it says skyline
nope
None really, I've had over 930 repo mods including a skyline. It's basically a meshslap. The modland mods are rubbish and gave me a virus and had to reinstall
whats ur guys fav beamng map mod?
Italy for scenery westcoast for chases 👍
What kind of virus? How is a mod even capable of infecting you with a virus?
this any good?
Cutting my FPS by 30 and randomly crashing my game. I remove all mods but that one still did it. So I reinstalled the game but kept the mods folder. Still did it. So I reinstalled again but deleted the Tesla mod and vehicle file and it worked.
So it's more like the mod made the game unstable, not exactly a "virus" I guess 😁
I guess lol
Check dms? I can't msg or friend req
pradoooo
How's the skyline going?
why do you keep asking bruh, just crash it and see smh
Haven’t been working on literally anything rn 😭🙏
Looks good meowbah
If it wasnt spawned in it was probably a real virus and was crypto mining on their pc, hence the framerate loss
huh im interested on how that works
can you send the file
reminds me more of the commodore utes. fixed headlight bx ute looks a vaguely like an xh falcon though, might have to make some xr styled headlights for the bx now myself
Looks cool.
Is it completed?
its "basically done" as he said
If that car existed irl, I'd buy it
OMG, this is amazing! Pop up headlights on a ute is something I never saw comming! Also with the camper shell it gives off fastback vibes. The roof rails on the bed are also cool!
Hi,
I have a small question. I want to edit a sound from a mod I got and if I change the sound file with the exact same file format the mod does not appear after changing in game. Can someone help me?
Where are the wheels of all cars stored?
I'm transferring models to another game, I want to do it as accurately as possible and not build the wheels myself
/vehicles/common/wheels
thx
crypto mining? lmao
No he was talking about the dynamo
oh yeah
it will probably will just be part of the next kljp update
Wish me luck guys, I have never made a car in blender let alone did any modding
if youve never done anything in beam i highly highly recommend not doing a full car
start small with parts
I realised going for something big was a bad idea hahaha
wtf is that bed in the base mod?
its a separate file, on the mod page
hey, im having trouble loading mods, i installed ECA rally and each time i load the scenario, i spawn with no car and an error
i alr tried installing via beamng and via the website->folder, each time same error
im also on the latest version 0.32
i think that mod is from like 2016
ah shit, do u know any good rally mods that work with the new version?
Id recommend a couple maps PJS drift&rally, gravel rally are fun and i think both have trials
https://discord.com/channels/710082165253079061/1169396519099715744 this is also currently WIP
any1 know 400+kmh car mods?
American offroad island looks fun, think i might dl that one
Are there any modded maps that have like spots to practice parallel parking (for my sister plus i have a vr headset)
The vanilla west coast has a bunch of spots in the city with parallel parking spots, just spawn in a few extra cars to park inbetween and youre good
is there an easy way put them at a regular distance apart and have them be straight (you can load scenarios as well right so i dont have to repeat it?)
you can use the map editor
Are there tutorials for it or is it simple?
using it just to move cars is easy, press f11 then just select the vehicle and it'll give you a gizmo thing to move it
ty
will this be on your patreon before it releases?
maybe
i dont know if it will be worth it because i kinda want to smash it out really quickly and not worry about early access
just a head's up, my mod will recieve an update within the next days, mainly featuring 6x6 parts for the D-series!
(it's this mod, if you don't know what I am talking about or who I even am) https://www.beamng.com/resources/gamer-s-ultimate-pickup-parts.29272/
can I use a mod from 0.31 on 0.32, theres few 0.32 mods
as long as it isn't like for/dependant on the 200BX or D series you should be able to
thanks, do you guys tryst external downloads from modland? Im only using direct right now
I've never had an issue with them but I've only ever downloaded like 3 mods from there, and it's not recommended
which company do you recomened for mods outside of beamNG repo
I think the repo/forum is really the only like officially recommended source
no, don't use modland or similar 3rd party sites
so only use the repo? or links off the formum
yeah
is it like viruses or screwing up your game
and reputable paid mods, though idk if you'll use paid mods so whatever
shit, leaked and stolen mods go there
it's not even worth going to modland, as I said, most mods are mediocre at best anyways
only mod I have now is the crown vic from the discord server
the rest are from the repo but IM looking for other mods because the repo is getting boring
look on forums then
I'm modding rn
thanks for telling me not to use modland<, I see all the stolen mods
Gave +1 Reputation to @cyan drum (current: #32 - 49)
Imagine being so stubborn. 💀
Some people are just busy, have you looked for a youtube video yet?
Fair.
@nimble zealot, did he get banned?
he just dele6ted the message
Oh.
That makes sense.
I'm new to PC and beamng and I want to install some cool mods like trucks and drag cars how do I do it like I need a well through
there's not many normal pickup truck mods, unfortunately just addons for the base game D-series and some kei trucks
the classic engine expansion pack is really good for making drag cars
is modland safe
i wouldnt say safe but its not too bad, not too good, some of the mods there have viruses and some dont. but i recommend searching for the best Beamng mods on Youtube and you’ll get the safe ones, could be from modland or another website but the ones in the vids are verified for the most part. @vague laurel
thank you
Gave +1 Reputation to @misty holly (current: #476 - 2)
np!
Such a pain 😭
What would you recommend the max Poly/Vert count be?
Italy map is 30 million iirc so probably over 30 million if we are talking maps
But iirc it took like 30 min to load for someone on blender
It’s not perfectly safe
Most mods there are trash and not worth downloading anyways
As a modland verified creator i can assure you that this is 100% factually true
modland has awful moderation so its not safe, people can pretty much upload what they want without any proper approval or checks done first
this leads to leaked mods, viruses, ip grabbers, stuff like that
and when you dm the admins to get stuff taken down it can take quite a while, even when its a DMCA complaint
the safest place to get mods is the official repo, second is the official forums
Are any virus checks done on the forums?
im pretty sure mods check them
I figured.
They check every file
And if it slips thru, moderation is pretty fast so no problem
Any advice for someone who want's to get into 3D Modeling and Modding?
Hello I would like to know who is the modder of euro trailer because I wonder if it will have an update to go with the new t-series and other truck mods.
idk where to ask this but does anyone know if theres a wheel ballast mod for the d-series?
dont start off makign a vehicle
Heya, is there a map that drives on the left so i can use like the hirochi aero
So ik im kinda late lol but modland is mixed when jt comes to beam mods
You can find mods with viruses or mods that were leaked or stolen, but you can also find some good ones. But just like Herprince said, do some research before downloading anything from there
<@&710084482031550547> ping again in case yall missed the first
I dare someone to do a vehicle with fully interractive interior (even the AC)
all the buttons imma press everything
The ccf is the closest we have to that
What would it take for a rework off this
I need quick help on how can I make a skin mod so that I just drag it into the mod folder
but why
like why add interactable ac
if ac doesnt server any purpose
ball chiller rn
Oh shoot is that the intake clamp? It looked like a vband to me lol
its a clamp thats for very high pressure tubes
it would just die in hot
the vband is the thing right at the end of the turbo
this ring
Ah, that makes more sense, Ill do that instead
thats what ive seen used
kinda looks the same imo what do yo think?
coul work
how hard is it to get into modeling cars from scratch
I wonder how I could give the race sequential transmissions I'm making for my gearbox pack (The Zelda Race Gearbox Pack, or ZRGP) RPM wobbles like the Scintilla GT3 mod has 🤔 The wobbles are quite noticeable on the Scintilla GT3, and I like that. It's quite realistic. It seems to use a pneumatic system coded in LUA on top of the regular transmission code though...
just do it 👍
anyone know any toyota coasters
no
can you make one
idk how to mod
my god bro
or how to use blender
im so desprate
no diddy?
How?
idk
I know the jbeam, just not the Lua for the air system that powers the sequential shifts
Modeling an entire car from scratch would be extremely difficult for someone with no experience in modeling, But I also dont want to discourage anyone from attempting to mod though 🤷♂️ start small 👍
I would suggest starting with modeling exhausts and intakes as its the easiest to do (In my opinion of course)
is it okay to use existing cars in the game
Of course you can make alot of stuff using in-game cars/parts
Links to best mods for real vehicles?
- The in-game repository
- https://www.beamng.com/resources/
- https://www.beamng.com/categories/mods.23/
Unfortunately, the search feature on the official site is pretty bad.
If you're looking for a specific map, I'd recommend googling site:beamng.com and then whatever map you're looking for.
For example, searching site:beamng.com racetrack will show all results for 'racetrack' from the official site.
For real cars I’d look at the beamng forums
There are some “real” cars on the repo, but they have lore badging
Stuff like the fso Polonez, anything under the arima brand, hirochi mistral, and the Ibishu crossport
Not sure if this is the right spot to ask this, but is there a way to commission someone to mod something specific?
I tried to download this 2002 Camry mod and the game says the file is invalid
how do I get this mod to work?
I think I had an older version that might be why
Does any one have a link for a XV20 Camery mod that isnt borked?
So there is no updated version Im missing?
then probably not
i would not recommend getting random mods from discord servers btw
this one has its hubcaps borked
I found it on Modland to
yeah that's also not a good place to get mods
both versions were borked and gave me error messaged
and there unfortunately is no CX5 2013 mod
ok then where do you get mods from?
the repo, forums, and reputable paid mod creators here
So relying on free mods isnt good enough?
it is
but dont get them from places like modland, random discords, worldofmods
because 9/10 they're leaked/stolen, shitty meshslaps, or something that you can get safely on the repo and forums
.
Thoughts on this single turbo setup I made?
very cool
does anyone have a link to a 2001 ford f250 mod?
anyone have a reccomendation for a good g37/g35/q50 mod, not tryna get a virus but figured id ask
none
why do you need it so badly?
What would be a good name for a lore freindly Lancia? My first thought was to combine Autobello and Civetta for Autovetta or Cibello but I think that is too basic.
I would love to hear what y'all think on the matter and any suggestions you may have
the bolide💀
What do you mean by that?
the bolide looks very close to the lancia
The Bolide is largely a Ferrari and Maserati. Though the rally version especially does have a hint of Lancia 037
spada
yes
balestra for crossbow
Oooo I like that. Could also do Archetto for just a normal bow
But a crossbow is cooler
I like the name Balestra more as the name of a car not the company if you know what I mean?
I do really like it regardless
yeah
its been a while since ive had to think of an italian car manufacturer alternative
wonder if ive got any in automation
i think i had one
nvm i was a basic bitch and called it arturo
arthur the car
I think I might go with Balestra as I test car names with it
It does sound very good
First car imma make is the Stratos with the name "Spazio" meaning space
And the full name of "Space Crossbow" is pretty fitting of that car
chat do i join his discord
chat i joined but idk what now
ill do it tommorow
Could just use autobello since there's not that much overlap in models between the 2 brands (Fiat and Lancia)
? i only said it once
are there any mods for uel headers?
Does anyone know any mods for modern American muscle cars? That isn't the Vertex
can anyone make a toyota coaster bus for me
no
Lmso true
does anyone have a link to a 2001 ford f250 mod?
no
k
Is ko-fi safe place to get mods?
usually yes, although it depends on where the source of that kofi link is, like the forums is usually the safest source and in that case it's safe
i saw it on steam, it had a full long youtube video of it also
https://steamcommunity.com/sharedfiles/filedetails/?id=2953030257
then on the steampage there was link to the youtube video and the youtube video had the link to kofi
I wouldn’t pay for any irl car mods, but ko fi is safer than other 3rd party sites
i looked on the link and it is free
that specific car is free
(spoiler alert it is)
Sounds about right
Hello there
russian mod sites are a Russian Roulette
bouncing head off of wall
Why. Why do people feel the need to take their mods and instead of update them when the car gets remastered, they just release it as a standalone mod which ruins any sort of cross-mod builds
@strange night is the ibishu evo going to be updated for the new BX?
I love the body but wanna use all the new drift stuff on it.
Which ones?
Maybe that one t series mod that overwrote tons of vanilla files
Well there were a few for the bolide. And now I’m afraid the bx evo is gonna get stuck with the same treatment
Literally one of the coolest addon mods I’ve seen, might be shoved into being a standalone forever.
It depends how hard it is to adapt it to the old bx to the new one
Hey wasn’t there a thread for a civetta 787b?
seriously, what's up with recent trends of JDM Commercial Vehicles flooding the beam modding scene
People finally started making them after 9 years of not having any
Plus they’ve risen in popularity in general in the past few years
Version download numbers are the current downloads for the version on the website, The total downloads are self explanatory, And the subscriptions is how many downloads were on the repository, At least thats my understanding 👍
Thanks
Is there a 64 impala mod? @ me with the response
most likely no, if yes then a very shitty one
Let me check
Was looking at downloads because it was mentioned above. Any idea why the in game and forum download number is 10x bigger/smaller?
And no its not version based as the most recent version has 474 dowloads on the forums
beam in game repo takes the short bus
Wdym?
Can I make car physics from Unity and add them to the cars in the game beamng
[UPLOADING TO REPO] I'm getting my first mod ready to upload on the repo. I understand it cannot containg copyrighted material, but can it contain links to my patreon or youtube channel (what about yt logo?)
what will be a better jbeam for a tractor fender:
option 1 (3 nodes on side)
option 2 (2 nodes on side)
omg what a kind gesture
Lovely
@frank cove yes the tony cart. Supersport moto is the only good one there is. It works pretty good but a bit wonky when pushing it to the limits. Its only really controllable on wheel.
Option 1 would be better, I feel like the fender is too curved to have a flat jbeam
Hey, if I were to make completely UNRELATED TO EACH OTHER mods for vanilla cars inspired by these irl ones, would it be better to release them separately or as one pack? (Idk yet if i'll do all these mods for vanilla cars, these are just options i consider)
I would do separate as not everyone wants all of the mods most of the time then again it can be smaller compressed
Separate would be better, also that sounds like a lot of work
I'm not going to make all of them, just like 2-3
hey i have no modding experience (or coding experience for that matter) and am trying to make the head invisible (for vr purposes) on the stig model on the agent_y dummy addon, could anybody help me??
anyone els'e's mP nop longer workinf with uipdate
can someone mabye make this for the grand marshal?
please?
You need to update it
No
;(
Yeah you’re 100% good. I’ve uploaded many mods with YouTube video links and my Patreon linked
Interesting. I’ll have to try it out as it looks really fun.
I would also LOVE to see an ATV or Dirtbike in this game eventually too and that superbike gives me hope
Same guy has a motorcross dirtbike that works really well to
Oh? Well damn I’ll definitely need to try that
I have skin making experience, if the skin is just that, I can put this on the Grand Marshal for you within a week or 2 (I still have school)
beamng drive documentation powertrain section when?
can you call it "police of calarii for gavril grand marshal"?
yall know where to get the trailer
What map is that?
Looking for a radiator springs map
I have no idea if this is the right place to ask but I was looking to download the DFA truck mod and the patreon says sold out. Apparently from what I heard it's because the mod is broken therefore it's down, so if that's true I was curiopus if anyone knew when it would be back up.
Not sure I think it comes with the game might be wrong
Yeah I have it it’s broken for me I think it’ll be a little he hasn’t said a time though
the port from the yakuza showroom maps pack by carkiller
How do i convert a .fbx from sketchfab to a .dae for a map
you can import fbx into blender i think
Ah ok. Then will I just export it to dae immediately after importing?
not immediately, you still have to prep it and all that
What do I do to prep it?
Shameless self plug but, I have a conversion of the Battlefield ATV
https://www.beamng.com/threads/generic-quad-remaster.94006/
Dude thats awesome! I'll have to check it out
Been looking for some decent ATV and motocross stuff
Dude this thing RULES
Anyone know any good wheel mods that aren’t machines wheel pack and whatever tf the other one is 😭
so i have decided to go to modland to download real car mods and fix them for myself(because the forums is not enough) but how do i avoid downloading things i shouldnt download?
2 is more than plenty
gambling
you might get a crap mod that sucks ass or you might get a good mod which is just probably leaked
or you might get troll mods that mess up stuff
Idk if it’s a viable way, but you could look on like YouTube for some if they have the links
But that’s just a theory I’ve never used modland or that for obvious reasons
reviews, googling whether or not theyre from somebody’s patreon, virustotal to check the files, obviously dont use an exe installer
dont use leaked mods, if you find them, get in contact with the creator so they can have it taken down
any1 that could do a little job and swap engine sounds for me?
Correct
Ones with higher download counts will also be safer to download
Check the comments of them too
Where to get the Meo Dragster
Anyone know how i can upload a mod larger than the allowed file size in beamng repo? I'm trying to upload my map which has a file size of 2.6, but its not possible.
You try the moto mods yet
You can go to the forums under the map section and make a thread there and post the mod.
in the "forums" its also saying that the max file size is only half a GB
Hmmm didn't know there was a limit. Try using a Google drive link and posting it on the forums. I don't think it will limit Google drive links
It doesn’t
contact AgentMooshroom5 or Car_killer. they are the 2 ppl i know that take care of the repo
are you sure thats the forums? you can upload zips to the forums, its a different setup than the repo
you may need to have them on approved drive links on the forums for anything above 500mb
but do what lichi says
look at mr fancy with his content creator purple name
fr
i applied 3 months or so ago
damn 3 months
maybe more like 2 and a chunk but like idk
They’re paid and I couldn’t find any reviews on em so I decided to save my money until there is a comprehensive review done about them so I can get an assessment of their quality
dang well congrats lichi
Dms
What a good website for mods
The only good one is beamng.com
No, Most of those mods are meshslaps and some have virus's in them 🤷♂️ In my opinion only download from the repository and beamng.com
Alr
can someone please make a sprint car like these
Yo, I just got started on this skin, and I was wondering if you had a high-resolution version of the logo under the "POLICE" text (otherwise I'd have to interperet what I see and make a high-res version myself)
has anyone made a dirt bike mod yet or is that not possible IN in beam?
They exist but atm the only one that does is paid (more than fair imo, can't imagine the effort it took to make)
The paid mod also comes with multiple sport bikes and a chopper I think
I got my contributor role! 😄
thats sick
i wasnt sure if bikes would work in beam
You need 40 rep
trackbroseff: 11 Reputation (#150)
Ah gotcha that seems logical
Yeah it seems they work but barely. Massive props to the modder still
Hopfully eventually someone can make a twin stick bike where the right stick is rider lean and left stick is steering/handlebar control
It should be possible
what if the devs make a bike 
I think it would go outside of a PG rating tbh. Because you need a rider for a bike and a soft body rider getting flung off at 150mph isn't very family friendly lmao. But I would still love to see an offical bike somehow
Or an offical plane. Both would be amazing
I want an official crash test dummy
trackbroseff: 11 Reputation (#150)
thank you beambot
rommb: 23 Reputation (#81)
nice
Rep is just got through people saying thanks yeah?
Correct
Cosworth DFV clone, anyone?
litterallyiris: 1 Reputation (#728)
castor.user: 0 Reputation (##ω)
cool
make it yourself
those carbs lookk
weird
Just throttle and intake, the DFV was mechanical injection.
but that flat plate just looks wrong
and the airhorns look too lowpoly
you can steal model/ textures from the pigeon race i4 engine
its got a decent itb model
They are low poly, the engine is already getting on for 20k tris, and I've a lot more detail to add. I'll add more when I've got more of the car in, if it's not too hungry
(I've added a fair bit more since that image lol)
how tf is that 20k
its the cables right
those look too smooth
There's a lot of detail around the gearbox (obviously not in that picture) and the exhaust
mind showing the polyflow
The cables actually have less than the exhausts, even though they're similarly made. but I figure people will pay more attention to the exhaust
Sure, I'll be working on it again later I'll send it then.
since like this entire high poly block im making is 26k (excluding the bevel node which makes it 140k)
and its a highpoly, im not really trying to make it optimized
Nice
Think it's worth spending a few more polies on the air trumpets then?
My plan is to swap out that block underneath them for something that looks a bit more like this one... but I want to get an idea for how much detail the bathtub is going to need
ill be able to properly advice once i see where those 20k polygons are used cuz thats baffling me
okopokooko: 1 Reputation (#728)
oh
I mean it's still less than 20k tris, haha, I'm just using a lot more than I was expecting. And that's without adding any detail to the block yet. I've used a lot of loop cuts, so can probably cut down the polies in the cylinder heads by merging vertices there (going to rely on normals for most of the detail there
I want to limit the engine and gearbox to 20k so I have plenty for the cockpit, bathtub and suspension
engine can get as many as you want really since it doesnt deform
also dont set a limit on polygons since thats just very limiting
just be cacious with how the polyflow is, specially since you can reduce polyflow
I'll redo the intake system to reflect the detail elsewhere.
I try to keep things below 100k for the whole car, but that's a habit I got into years ago so I might have to relearn to not do that. lol
thats
not good
100k is a very low limit lol
Thanks, I'll up my limits haha
Gave +1 Reputation to @drowsy leaf (current: #58 - 28)
Does it also happen in safe mode?
https://documentation.beamng.com/support/launcher_support_tools/safe_mode/
Alright, I can make it so that when I finish the skin, that is it's name in the parts selector
hi everyone, i found a pretty good Delorean 3D (time machine) model. i thought i share it with you all. in the case someone is searching for a car project https://isaaclukevfx.gumroad.com/l/delorean3dmodel
Hello CG Artists!Here is my DeLorean 3D Model.You can use it in any commercial projects and for learning purposes. Feel free to modify the model, texture, rig, animate, light and render as you wish.My only wish is that if you post your work, you let me know/mention me/send a message so I can see the amazing creations with the model. This is the ...
cool but way too high poly for beam
hello! anyone has this license plate mod?
Hello, I'm looking for someone that could recreate Better Gauges mod in Beamng. The only thing that needs to be done is to delete speed indicator speed limit for some cars and add some not working gauges. It could be done by me when editing the files of original cars but I don't wanna break them and that's why I'm asking someone to make this mod.
Just like this but for all cars and for speed and rpm
does anybody have any mods so i can make my cars static and put stickers on them?
like this
anyone know of any good rear-mount radiators for the d-series?
alternatively, does anyone know what mod the methanol injection radiator replacement is in? I have it but can't remember and don't want to dig through 150ish mods unless I have to
Yo guys what's the difference between the cdae files and dae files in the beamng files?
Cdae is the cached version of dae files. You can ignore them
Alr
so im trying to add this garage to wcus but when i add the textures for the garage this happens
Does anyone know a replica or a fictional car of audi in the repo? Or any other car brand? I don't want it to look old-school. It should like more than 10 years old
There aren’t any Audi replicas on the repo
Does anyone know any ford explorer,Taurus, or mustang mods that are atleast semi good? Same for any pickups and chargers and challengers
Do you have the latest version of the Classic Engine Expansion Pack? Previous versions of that mod have a texture issue which caused the T-series textures to bug out like that.
Can anyone help me? How do i change the brightness of lights
I got a mod and the taillights and headlights are way too bright
Thank you bro
Gave +1 Reputation to @shrewd kraken (current: #180 - 8)
Does anyone know any ford explorer,Taurus, or mustang mods that are atleast semi good? Same for any pickups and chargers and challengers
Are there any shitbox car mods
In the mod, there should be a something.materials.json file, which contains all the data for the materials.
In there, find the lights materials, which should have a something_on and something_on_intense variant. These two are the actual lit up versions.
Just lower the emissiveFactor for those two materials, and the lights should become less bright 🙂
also is anyone able to help me? the nurburgring mod map doesn't have any missions on it, it used to have some on the map but now theres only a few fast travel points
Unsure if I can ask this here...
I am busy doing my first full car build in Automation however unsure about how to do the interior, anyone have any suggestions? Making it for Beam
use interior fixtures
though i would suggest you speak further in the automation discord
Were they possibly a seperate mod? I only ever remember ksnord having 1 or 2 time trials
i'm not actually sure it just did have time trials at some point
it appears they may have been
hello I would like to have a quick question if I make a map but the one with a single 3d model will not cause lag? with textures that often look the same
next full mod, 71-74 dodge charger
Finish the XT first.
Still... handsome.
he needs to buy an xt first
i could do it without a real one, but i dont want to
its my favourite car and i want to do it justice, plus im going to buy one at some point anyway so why not wait
you cook so quick fr
Does anyone know who's mod is this paid or free? (I'd be interested in having it.)
thanks amigo!
Gave +1 Reputation to @abstract mango (current: #480 - 2)
oh my god
@snow isle made it
cool already downloaded it, bros got a cool taste B)
Any way of doing that with the material editor?
Not sure, I rarely use it. Try looking for a material setting that mentions emissiveness or brightness or something
Aight ill try that soon
#beamng-videos message yall know what map is this?
guys can i get a link to the an 12 mod?
OOOHH MY GOD
anybody know how to install the Nordschleife mod?
Hell yeah
The non horrifically overpriced charger generation
Hello ppl, i have a problem with the hirochi CC mod, basically when i spawn it i can't see the car gear, rpm gui, etc or even drive it, also i can't interact with it. Anyone can help me?
did you download it from the repo?
Yep i did
if so, make sure its updated and then clear cache
How i do that?
in the launcher, support tools, clear cache, and you can just do a basic cache clear
itll look like its gonna take forever but it speeds up early on
still takes a little bit so id find a youtube video to watch in the meantime
standar cache clean?
yep
btw i installed the mod manually
i think i am
i mean in the mod manager it says i am
yeah then remove rhe one you put in manually
and then make sure you are actually subscribed to the one in the ingame repo
just search for CCF
alright
still do the cache clean since there will still be cached files from the one you manually installed
did you buy the game
offtopic but i keep thinking your name is TheTalkingBeth

😭
yo anyone know where i can get the multiplayer mod?
that works too
I typed the link manually 
i need help to make main materials for porsche.
alas neither gets the rep
enjoy
Is that just for headlights or does it work with taillights too
@dense tangle should i make thread for ford van cuz idk
So a bit of an update, i did it and now the textures on the lights and signals dont seem to be there when turned on
Idk if thats just bc they were never there to begin with or what
If you can help me out a bit more with this in dms thatd be great
dew it
is it good enough to get its own thread 😭🙏
I mean im just getting it in game
and I did share quite a lot on the modeling side :p
yeah
Does anyone have by a chance Touareg with two pipes on the hood?
anyone have a mod of the suzuki samurai sj413?
yesyeysyeysyesyeysyey
u sure?!?!?!
hello, I have a question in which text files should I look for the maximum endurance of given engine parts?
anyone know of any cool bx bodykit mods, i dont really like the ingame ones (especially a pig nose style for the pop up light front)
I'm not someone to ask for something, but is someone able to make the cargo boxes to work for the cargobox upfit for the Gavril Durham, currently it has no option for them, and i would like to use it as my career truck for city delivery
hey, can anyone help me? I downloaded a carmod and it worked fine, I tuned the car and drove around. As soon as I went to a different map this happened
Hi guys . How do u add custom .png for decals ?
Hi I’ve been wanting to install some mod but it sometimes did something weird where the vehicule wouldn’t spawn and instead the base truck would spawn with white color and the steering column out of the vehicule and it would go at bazillion speed diagonaly to the back left I tried installing mods on the game and through the modding website but nothing changed I would appreciate if someone could help me
it sounds like you installed a mod for a mod which you don't have
I do not think I did that. I installed the jbx100 mod from the repository and it still did that and when I installed it from the files it did it again
in that case its for the 200bx which was remastered and breaking it in the process
So what should I do ?
theres nothing you can do unless you know how to fix it
Ok thanks I guess
Gave +1 Reputation to @dense jungle (current: #110 - 16)
made thread or smth idk
ping
erm
Hey ppl, i have a problem with the Gunner patriot mod, basically i can't open or close the doors, i click and nothing happens
I can't install mods from modland site, bc of the anti virus, what can i do
Disable it while downloading prob will fix it
Then turn it on again
well, I can't really disable it
Why not?
I paid it, and I think the only way to disable it, is to cancel it.
Oh dang
welp, then you're gone i think
ye, sad, they should add an channel with beamng mods, where the creators can put them there.
fr
still you can download mods from repo, there are good ones too
repo?
its the beamng official mod page
oh
yeah well those mods, they are kinda meh
I mean they are good
but it's hard to find mods you want, like tanks.
then where are the good mods?
- The in-game repository
- https://www.beamng.com/resources/
- https://www.beamng.com/categories/mods.23/
Unfortunately, the search feature on the official site is pretty bad.
If you're looking for a specific map, I'd recommend googling site:beamng.com and then whatever map you're looking for.
For example, searching site:beamng.com racetrack will show all results for 'racetrack' from the official site.
but mods from the repo and beamng's website are "kinda meh" according to xlender
Not according to me 🤷 these are the only official places to get mods, all other sites are 3rd party
theres just a lack of mods since only high quality non scammy shit is posted
3rd party sites will have more cars but they will just be very low quality or stolen
i just wanted to see whats the good website to get mods, according to xlender haha
also dont get mods from modland
#1102973298222051358 it exists lmfao
I meant like you won't find usually irl car brands, tanks or idk, but the mods are good quality most of the time there.
Oh, thx.
Irl mods can’t be on the repo for copyright reasons
There are some irl cars, but without real badging on it tho
Ye
Anyone know of any mods that make my cam for cars go brum brum brum? Instead of brrrrrrrrrrrr at idle?
there's also some real car mods on the forums
Like a blow big block
So, went in and reworked a lot of it, loop cuts were (and still are) causing poor poly-flow... I halved the polies by merging a huge number of vertices and tidying stuff up... Here's the current (and I'm still adding new stuff including a reworked intake). 23k tris currently....
ok i got a few things i see wrong
those cables are too high poly
HT leads or fuel lines? Or both?
using beizer curves with these settings you can get much lower polycounts
both ideally
then this manifold thing is way too detailed, you can remove 2/3 of the loops and it would still be fine
the headers are fine
Yeah, I'll play with the beizer curves they sound like cool shortcut
wait
you werent modeling all the wiring by hand right??????
dont use modland
I've also decided I'm not going to worry too much about polycount for the time being, after looking into it a bit more, my typical limits are about 15 years old lol.
that is literally the reason why you shouldnt be using modland
and dont follow this advice
No, mathematically
yeah lol
tho beamngs polycount limit is like 10 year old
tho thats more on the parts that deform
engines and such are a minimal performance inpact polycount wise so you can have them generally higher detail
Not just that, but I cut my teeth modding for GTA4 and such
gta4 body polycount i think is a tad lower poly than beam so that good
what gta4 stuff have you done out of curiosity
Yeah, generally you aim for around 20k tris for the whole body.
Nothing I published, but I put a Caterham, BMW Z3 and Rolls Royce into it.
yeah beamng is more like 40
well bare shell is more like 25k
with chassis details youd get to like 40k
interior is genrerally pretty detailed so add like 15-30k polygons
then add another 30k for all mechanical stuff
this is going off of 1980-90s shitbox car models since thats my particular niche
ofc old racecars would be lower poly just because theres less stuff
and modern cars are the opposite
Well, in the car I'm aiming to build the engine is a stressed chassis member, but at the same time it'll still be non-deformable, Interior won't be 30k as there's pretty much no interior. But I'd like to give a bit more over to suspension and engine as they'll be always visible
Could someone explain in short why making the Jbeams of a modded car is hated by mod makers? Before I decide to try it out myself
vro might be building whatever that porsche lm car is
its coding but with math
generally things that are not fun
I mean I am a programmer
also since its a proprietary thing to beamng theres not much documentation other than the official wiki and the help on a modding discord server
The Jbeam for the Autobello Pico doors, just the doors, nothing else, is 1000 lines long
aha
It’s a tedious process making things that aren’t directly visible but still need to be done to a very high standard with minimal tutorials
It's coding, data coding, not programming
So, if you wanna make a Jbeam you bassecally kinda make a Json file with coordinates something like that?
I see
That explains it well
Yup, coordinates, material properties (strength, resistance, weight, etc)
Maybe a stupid question, but wouldnt it be way faster and more accurate if the meshes of the car parts just got the properties of the Jbeams?
Unless it doesnt/couldnt work like that
well i mean you wouldnt do that
you just repurpose other jbeams for the structure and allat
yeah thats how it works
using a flexbody it links the nodes to the tris in the mesh
Ohh I see
It's not that it's hard, per se, but it's very involved, and requires a lot of time. And say if you build the Jbeam and decide the rear suspension is too stiff, then you could spend weeks just tweaking the spring rates, etc.
What I kinda meant to say though, just as in Blender for example, when you get a plain square, and subdivide it add a rigidbody to it it can colide with each induviual subdivision, couldnt something like that work for BeamNG?
Ahh I see, yea that doesnt sound fun
visual representation of why jbeaming isnt fun
oh also for suspension you basically have to have a degree in engineering
no like seriously
It's true, but thankfully I do
Yeah you legitimately do lol. That and many aspects of chassis design too
Pov: The game is to realistic
you have to know how suspensions work and translate all the values and thingimajigs into a pile of nodes and beams for it to just explode
Realistic is quite an elastic term, but yeah, kinda.
also i have no idea why the flexbody wont show up here either, all the names and such are correct
I mean, the collision physics seem pretty realistic (atleast up to like 100kmh but thats probably because there arent to many videos of cars crashing at anything above)
And for the suspension, it also looks like it behaves like the IRL versions of the cars would
Like you wouldn't be able to look up the figures on your favourite car and just transcribe them into a Jbeam, because even Jbeam isn't exactly accurate, but it's close enough that knowing the real world figures will make your Jbeam better
Yes, it does, I'm not knocking the game, it's far better than most, if not all, that have gone before or even since in how in depth it simulates vehicles, but even an F1 designer and engineer would have a learning curve building in Jbeam. Thankfully there are some very clever lads and ladies who have described how you can do most things.
A good place to start (it's where I started) is to do the Formula Bee tutorial to get a feel for Jbeam
Formula Bee?
It's Beam's car making tutorial. They give you the engine, suspension and moving parts for free, then you essentially build a body and chassis around it
I made a Porsche Speedster style car
It handles terribly, too, so I think it's pretty accurate 🤣
I would just love to make one of those very old cars, back when they were "better" when they didnt break in a collision (Usually killing the passengers)
I think that could be fun in BeamNG since the safety of the occupants isn't a concern (To me).
The Burnside Special is good for that 😄
i really wanna make a indestructible valvetrain so i could overrev as much as i want lmao
TBF I think you can do that with one line in the engine Jbeam
