#mods-discussion
1 messages · Page 88 of 1
this is so cursed
...i love it
with the reactions im getting to it, i think ima release it when i get everything working right xDD
I love how everyone's first reaction is always the same lmao
mopar!!!! 🇺🇸🇺🇸🇺🇸🦅🦅🦅🦅🇺🇸🇺🇸
magnum too given the roof
did you make that model? looks nice. also seems rather high poly
hey guys, I'm learning to mod beamng and I'm quite bad at it, can someone tell me what's wrong here please? (bumper not showing in slots)
did you do control + L and control + R?
yeah
is your folder structure "mods > unpacked > modname > vehicles > sunburst > ... .jbeam "?
then maybe syntax error, install vscode and install the "Jbeam Syntax" extension, then look for any red stuff and also make sure there is a comma where it needs to be
ok thanks
my diff doesn't want to work, it goes motor > shaft > diff > shaft that is connected with wheel. But it seems to be creating a dummy shaft that breaks something, can someone help me out?
There’s a good drafting mod, and a tire thermals+wear mod in the repo
Ok thanks
bad screenshot
Barbuck
Is there a formula E mod?
Does anyone have a mod that u can replace the suspension with metal bars? i saw it showcased on youtube by CrashHard but he didnt release it
BeamNG Drive - Cars vs Welded Suspension with Steel Rods
Want to try out my wip mods and get modding news before anyone else ??
Become a member: Get custom badges beside your name, and get early info on future mods!
- https://www.youtube.com/channel/UCnr8mmN4Jcfs2vCX3SgiOpg/join
My CrashHard Dummies 2.0 mods - https://crashhard.gumroad.com/
- h...
took the frame from the new enclosed cargo trailer and put it into one of the RVs from Johnson valley, i have a plan to make all the trailers (excluding the one fillman86 already did)
hey, when i try downloading mods from the repository all of them just cancels and says repo error at about 90% anyone know whyt
the redtail bastion sometimes stalls out when using a manual. will adjusting any settings in the frictionClutch make it take off from a standstill more smoothly, or will I have to switch to viscousClutch?
hey @frank kelp are you working/making any new mods? i want to learn how to mod
Is it possible to modify/replace the path following algorithm of AI?
I don't mean change the path or parameters available in the UI. I would like to at least dynamically alter the following goal point.
I'm not as I'm extremely busy IRL
Set whatever dampers you have in your car to maximum value. If possible override the max value and make it as high as possible.
This will result in similiar behavior that you see in the video, with only the tire and body deformation working.
the gunner claymore interior is epic
check your hard drive storage
I got 90gb left
hm
Clear cache or verify game files, if that doesnt work, probably manually download mods from the beamng repo from here: https://www.beamng.com/resources/
i thought it was a plane cockpit for a sec lol
haha
Maybe you can teach me when I get my labtop lol
Hello
Hey
I don't teach how to mod lol
YouTube can help you with that instead
ok thx
Gave +1 Reputation to @fathom thorn
Hi there! Would somebody be able to share how to find the links to the mods in the showcase your mods channel?
The links are often posted in the first message in the thread
Most mods there also have a thread on the beamng forums
And not all mods are available to download yet
Thank you! I assume the one I happened to find interest in was one where a link was not shared along wit hit !
Gave +1 Reputation to @fathom thorn
that’s if you either prefer outdated BeamNG tutorials or a fillman video but with more trial and error
is there anyone that could make a mod for me? i will pay. if not can somebody help me get started on a mod?
Depends on what kind of mod you want made
id like a mod of my rzr bouncer or another one. mine is in my pfp
What the hell is that
its weird i know xD
Ignore the fact that this took 3 days to answer to, but a mod to make
roll cages arent JBeamed? what the hecc
EV delivery scout, now you can listen to your intrusive thoughts in peace
Got a question, looked everywhere but unsure if anyone else could give me some help. I was wondering if there's an open wheel car mod, kinda like a formula atlantic base.
i'll try to look for it, mind linking it?
wait, think i found them both
actually kinda what I was loooking for sweet, thank you
HELLO this is the 4th time of asking lol how is the offroad vic going
why dose this work so well
Is anyone think of adding engine options for the 6X6 Bolide?
i was when it originally came out, never got around to it
i have you blocked so i dont get your pings
have an image, thats it
why did u block them lol
23 messages about that vic while I was doing things irl and not home to reply
holy, why are they so obsessed ☠️
Dam does the snorkel work?
anyone know of a 79 series ute mod? and some good 4x4 maps???
Ik of a 79 series mod, it is paid, just letting you know and it’s on patreon
how much does it cost
i would like to have a LOAD of 4x4 or burnout cars for australian rp links anyone????
Idk, how ever much the patreon thingo costs
ok
Go onto patreon and search this guy up
Yo, how long until someone makes a fictional BearCat mod?
Hello, I have an idea for a fictional car brand
It's called Willing, and it was founded by Hiram Willing in 1901
It's from Kingbrook, a fictional city in Midwest.
try RK's Customizable Engines, has more tuning than you could ever imagine. Finding a sound that replaces the default V6 is hard because it would replace files
Hi!, it's quite simple. All you need to do is open this menu, and move your userfolder to the D Drive, this moves everything such as mods and such here too, so it frees up space on your C Drive to then move it all to the D-Drive.
Hope this helps. :)
Thats good then. :p
they are, not really though, they just add more beams for support
tried making my own, ended up giving up, its way to hard, maybe if you can give me all the schematics for that I can try modelling it in my free time
i knew they connected to roof, but i didnt know they didnt have their own structure
i just made my own, so now it works how i want it
great, tried making a convertible etk k series, that thing needs a remaster badly, has thousands of overlapping vertices and it has shading issues do to that
dang
fixed the materials, this is the last screenshot I have of it, but it still looked dent
yea that miramar started out with my friend "hey you should throw the 423 V8 in the miramar" i decided to cut the roof off and give it 5 lug conversion
dang
i need to fix the UV
yeah, its gonna be tricky
what you think this is my first mod or something?
yeah, I thought that
oh wow, I wondered how you finished that, looks really hard
the only hard part about it was the textures tbh
they arent my strong suit xD
the blower be holding up the car xDD
Anyone with me on this statement of mine?
Does anyone know a good place to commission a mod? I have a few mud trucks I'd like to make, my buddy and his family runs them and he'd really like to have them. I'm looking at between 4 and 8 trucks, and I have rough horsepower numbers and pics for each, no need for precision on the hp numbers though.
Anyone remember the cut up 200BX that was put on the forums and in here a good couple months back (maybe a year, yeesh), it had like, the quarters panels removable and the roof and all that?
Yeah, I dusted off the files and did a thing, now... Bolide JBEAM
It uses outdated and now broken materials after the ETKs were updated.
Hmm
oh
Is there any euro truck mods? Can't find any on the official site. T-series is getting me bored.
There’s the Segra Ultimat which is wip, and will be laid
There’s also the Man TGS on the beamng forums
By "laid" you mean "paid", right? Is the one in "showcase your mod" channel?
Can you plz post the forum link? My search returned no result.
Sry I mean the MAN TGS link. Can't find it on the BNG official forum.
Yes
Here’s a fix for the mod
Ok thanks a lot.
Ah thank you been looking for a update for the man tgs
Hey guys im trying to mod a bolide (Its my first time) And does anyone know how to make the tires really grippy?
Are any mods on modland safe?
Some are safe, but almost all are just bad, or are leaked
Was hard to get concrete advice on this lol. Other than repo, is there any place to get 3rd party mods safely?
The beamng forums
Would it be possible to have the scintilla in 0.23 bc my shitty pc cant run more
no
Well it could be if u replace common file
And take the scintilla and bastion from 0.24 and common file from 0.24
It was possible with bastion
You should try first to import it as a mod. Then you see what’s working and what’s not. For the bastion you’ll need the common file.
Wait, I think the bastion engines where not in the common file in 0.24
For scintilla u also need common file bc tires Arent there
But for bastion there is a mord
Mod*
On Modland bastion v1
you know what, this is the best mod in beamng
true.
but scintilla uses 0.25 technology
guys yk the anylevel lift mod
I installed the mod Slightly Longer Roamer, but the tab to make the car longer doesn't show, what do i do?
https://www.azmotors.fr/PIECES_MASAI/QUAD_MASAI/vue-eclate-A550I_A550I_EPS/CARROSSERIE_ARRIERE.html https://www.azmotors.fr/PIECES_MASAI/QUAD_MASAI/vue-eclate-A550I_A550I_EPS/CARROSSERIE_AVANT.html https://www.azmotors.fr/PIECES_MASAI/QUAD_MASAI/vue-eclate-A550I_A550I_EPS.html,
Réparer votre CARROSSERIE ARRIERE Pièces Quad A550i INFINITE et A550i EPS avec pièces MASAIneuves détachées d origine avec AZMOTORS spécialiste depuis 1991, commande en ligne paiement sécurisée
https://www.azmotors.fr/PIECES_DINLI/PIECES-DINLI/vue-eclate-DL700X/CARROSSERIE AVANT.html https://www.azmotors.fr/PIECES_DINLI/PIECES-DINLI/vue-eclate-DL700X/CARROSSERIE ARRIEREhtml https://www.azmotors.fr/PIECES_DINLI/PIECES-DINLI/vue-eclate-DL700X/SELLE.html
Réparer votre CARROSSERIE AVANT Pièces Quad DL700X avec pièces DINLIneuves détachées d origine avec AZMOTORS spécialiste depuis 1991, commande en ligne paiement sécurisée
Réparer votre CARROSSERIE ARRIERE Pièces Quad DL700X avec pièces DINLIneuves détachées d origine avec AZMOTORS spécialiste depuis 1991, commande en ligne paiement sécurisée
where'd you get that 3d model, from that website?
Des modèles de Véhicule Tout Terrain 3D à télécharger, fichiers dans 3ds, max, c4d, maya, blend, obj, fbx avec des options low poly, animées, gréé, de jeu et de réalité virtuelle.
This is gonna be perfect for a series I do on my channel
guys i have a premium 3d model of a mountain bike if anyone wants,
if anyone wants to adapt it for beamng
9 trillion triangles
😋
This surely would bring even an RTX 4090 to its knees.
when a 3d model is better than your mountain bike
this is especially true for me, as i do not own a mountain bike.
hello! are there any mods that add a rotary to the 1st gen pessima (excl. kljp?) thanks!
also i have questions about how much custom maps like some of the togue ones, hakone and shuto affect fps? my build isn't the highest spec
if this is the wrong channel, let me know but this seems to be right to ask these
Hm
Hi, I'd like to create a cheap and simple map for my private server, I don't care much about details since it's just me and two more friends who play on said server. Is there maybe a template terrain like there used to be?
Yes, but you have to enable „enable auxiliary debug content“ in the level selector.
Thanks
oh my god are those modelled welds
thats insane bro
9 million triangles that are basically impossible to fix and also its really hard to make a bike for beamng, only 1 mod that I know of
yeah I dont have 150 dollars for a model that might not even be game ready
A 2020+ grand wagoneer would be cool for beamng
Is there any limitations to a .dae? Like the number of vertices, or how much differents materials it can have or things like that
I'm sorry, but this model is so horribly optimised. Not game ready.
hey if i wanna spawn in the same mod fatser how can i do thta
How can i change the chance to get a car (its a mod) in career mode in a dealership?I got the undesirables mod but i cant find it at any dealership, but i saw a guy on yt who got one of them in a dealership so i want to change the chance to get it at any dealership
that
I think you need to change the population amount in the configs info file
where can i find that
how come i always feels like the game looks bad even at max settings. it's not mod's fault either. vanilla vehicles give the same vibe
dynamic reflections barely make a difference to that feeling to be honest
tbf at this point grass and tree textures could be up for a upgrade
Set the time to the evening or morning
It makes everything look so much better
looks like the map you're running isn't using PBR textures
pijeuon
Then make the paint more metallic and turn down the roughness
The car also looks like it doesn’t have pbr (I could be wrong)
i can gladly run beamng on high settings w 60 fps
bro i cant get 40 fps on lowest
damn what specs do u have?
cuz like my pc was built with stuff in 2018 lol and it has never been ''upgraded'' other then adding like 1tb of storage
yes it's perfect like that, but I was thinking of something more robust with hydrolic suspension and winch etc., but thanks as well I'm going to test it
Gave +1 Reputation to @onyx dirge
Next remastering mod Socata ST10? 😄
ryzen 3 CPU
Radeon integrated graphics
238gb of storage
8gb of ram
Sorry
Is there anyone willing to give me a quick help with a livery json?
But can we at least make threads of fixes of your mods please? I have one
oo okay maybe upgrade small parts and yk it can run better, also muye made a incredible video about graphics for ones pc, ranging from masterpiece pc, to potato pc.
wheel spikes Mod
Intel I5-13600KF
Nvidia Quadro 5000
64 gb DDR5 5600
2 tb SSD
and how much fps do u get?
A new east coast
Average 2024 crossover:
50 on lowest
on gridmap
i cant run east coast
@wild raft congratulations you have polluted my mind, now whenever i see a ford focus I think of the vertex
Fr
Sammmeee
I don't need to do it
I don't need to do it
Does anyone know how I can extract the car rim 3d models from beamng?
why is thing so bad yet so good
yeah sure Ill spend 2 years to make a car made by ai because you want it
so i m working on a skin for the bx200 and well the windows dont have any reflections whatsoever lol so idk what causes this so idk the fix
any idea?
My Genius plan worked out!
@cerulean spoke sorry for ping but here's the update for the man truck
Incase you're interested
Thank you Mate! I'll try soon!
Gave +1 Reputation to @humble kindle
Np happy to help
😘
https://www.mediafire.com/file/vwa2gz5kjv6ak8c/ks_nord_v20230416.zip/file
NEW UPDATE 2023-04-16: Black stripes in grass fixed
Remove any old versions of ks_nord in your mods or levels folder and clear your cache before installing. Place the .zip file in your mods folder to install. Ultra lighting is recommended if you can run it.
Changelog:
2...
can i have help installing this mod? i have tried downloading the zip into my mods folder etc but it doesnt appear in game
Dont have the skin bug but now the cars wont drive xD. Car is shifting up but it doesnt move ...
Yeah I have the same issue now
You'd think when a mod gets updated it would be better
yeah
can you revisit this?
probably
make it sound like a straight piped huracan race car 😄
well 924 parts are expensive
i didnt say buy 924 parts my guy
i said upgrade small parts
like buy 1 or 2 upgraded parts
I don't have money for 2 cars and a PC
Yeah,924s are fragile,they break 2 times a week
VW made those engine out of cardboard
i mean i cant afford 924 parts and PC parts
VR6 Stella
AW Goal Engines fit quite well in the Stella
Few missing textures but its alr
Is it possible to import and object (building for example) from one level to another ?
Do y'all have any good mods that add more parts to the etk-800? Like fronts n' stuff im just looking for anything really to let me create different looks on my cars :)
Thats maybe not under the search 800 on the repo in game hehe i got the good ones there already
Do you want to add only external parts or you might add new engine in your car for example?
I mean im not against internal parts but im focusing to the external parts
Hey dude I made a Stagecoach mod
I see. I don’t have any ideas, but I think you should search something in repo. When I was using that car, I found a lot of stuff in repo. I hope I helped you and you might search something in youtube or on official Beamng forum
https://youtu.be/S_-oJQmkuow?si=sFR8NNGO-iyJ8Lhm does anyone know this map?
For Business Inquiries:
business@coolkidfrmbx.com
My Gear:
Moza R12 Base - https://mozaracing.com/?ref=lJkGmy1UizpB8u
Moza RS Steering Wheel
Moza SR-P Pedals
Logitech G27 Shifter
Next Level Racing GTTrack Racing Simulator Cockpit - https://nextlevelracing.com/products/next-level-racing-gttrack/
LISTEN TO MY MUSIC!!
Click here to listen to al...
Cheers :)))
Looking to start modding the game, should i add a v64 engine?
If it's possible, yes
Are you planning on making more realistic maneuvers for An 12? @onyx dirge
Does anyone know of a Ford explorer police mod?
guys
Imagine the Procyon Centauri got aftermarket parts in reference to WALD
Hello. Is there anywhere where i can find lua api references? I cant seem to find any besides the old documantation forum and im not sure if this is actually accurate.
If so pleade tag me here or write me a dm thank you!
sbr4 swapped covet mr. I´ve also added 4wd and awd.
but its 100kg heavier than the normal mr covet : (
thats epic
The Lua script side in beam is entirely undocumented
So there is nowhere where i can look?
Okay well better than nothing i guess
Otherwise you'd need to go through the game files, I don't know if those links are outdated or not
Will see thank you
is there anywhere i can ask more advanced modding questions? i've tried the forums, and discord, but most of the time nobody can or will answer the question i have. it's really frustrating because i've been stuck on this issue for a while now and i really want to progress.
We need some UK vehicles. Like UK busses. Enviro 200, Enviro 400 etc. Plus in UK bus liveries. To be fair, the game is just mostly based on LHD and in countries that drive on the right. I know the game is based in the USA (I believe) but we need some UK in it too. Hopefully, we, the British, can see some more of the UK assets.
would be sick but there’s barely any centauri mods
not a big fan of this ngl
I can’t get to grips with the grille, it just needs to be removed and it needs to look a bit smoother in general to suit the centauri
My first two mods I have ever made!
very cool
whats the second one?
This B5 rs4 avant is the most buttery smooth car I’ve ever driven on beam
Human males when they reach 7 Earth years of age
Would someone be able to help me with the jbeam for my ps13 mod
has anyone a mod with austrian police (van usw)
Cutoff of the gauge cluster
bc usually the gauges are circles
Thank you! Im glad someone likes it
Gave +1 Reputation to @floral tangle
I might aswell tone the headlights blueish to fit the name "xenon"
dev quality mods?
wings on this mod dont support the cut body from other mod. is there any way I can fix that? (left is original)
they are coupled to the body just fine expect being a little too high
oh i think i found it
do you know what mod the countach is?
is there a way to make AI ignore police? because i get random vehicles fleeing and stuff
Rotary goes brrrrrrrr
Imagine an ALX 400 
Definitely need more UK themed things. UK map would make this game even more incredible
🤣
does anyone know any good kei car mods besides the ibishu chisai?
Who know where I can get mods with no virus
beamng website, nowhere else
ofcourse, beamng website and beamng itself
beamng itself and beamng website are basically the same thing. Beamng itself is just the repo section of the website, so I usually just say the website X)
true lol
Yes its Land Of Sand by BeamBoy
Btw , i been searching for this map for so long finally YT shows me this video and here is , does some body know name of first map from it https://youtu.be/Oiv807-K2Js?si=NYgiH4T1bNOzqr6T ?
Let's play the quiet game.
Merch - https://www.jadenw.com
Member - https://www.youtube.com/@GamingJadenWilliams/membership
Socials -
➤ Website - https://www.jadenw.com
➤ Main Channel - https://www.youtube.com/@Officialjadenwilliams
➤ Gaming Channel - https://www.youtube.com/@GamingJadenWilliams
➤ Tiktok - https://tinyurl.com/JadenT...
I really want to get a mod of the btr 80 and the russian t-80s tank
I really want to have these two but all I find are trojans
what the f is this? I got to 20 advert sites and some actually innapropriate stuff lol
i remember i had a remastered version mod of the hirochi sunburst
i forgot its name, but i had it at 0.27
Is it possible to convert track from rfactor into beamng and if it is possible is it how hard? My mate has done finnish folk race track for rfactor I asked permission to do this but I have no previous experience about modding and map making but I'm interested about it.
Official BeamNG Website or the In-Game Repository
Their mods kinda suck tho
False
Mods not on those sites are the ones that suck
Repo mods are meh at worst
And forum mods can be ok to dev quality
repo mods that are bad is basically out of date mods
as repo mods, there is carbonworks F4 which is the best formula mod at beamng out there
Yeah
those "bad mods" was marvelous at their time of release
most of them are released mid-2017 early-2018
and ???
did you only download out of date mods
Might've been automation mods you downloaded
altitude
those are the best mods you're gonna find. if you're not happy with them, make your own
Like where do people be getting those like fords and stuff
All of those fords that you see are way worse than any repository mod
But I can’t find any in the repository mods
You can go into the forums. They have a few good ford mods there
What’s forums
Beamng.com. official site.
Oh Alr thanks
Np
Weird Miovi Swap of the Day:
3.0 SR-TEC
Also Called: Pessostella
Serenity Widebodykit
:scroat:
I really hope we get some halloween mods this year...
I wanna do some spooky car related things in BeamNG this year!
is there a function for the turbocharger rpm that I can use for a prop? currently I use rpmspin.
i love pbr textures sm
Dose anyone know how to make a static object from a map into a moveable one? There is a nice garage door and a gate i would like to make use able
there’s a bloodstained Bastion mod
How do I install real car mods without getting a browser hijacker’s
Use the beamng website
There’s a pinned message with a link to good irl car mods
why was that so fun to watch
Well, chose to listen to Christine’s attacking theme while driving to school today.
Man, it just makes me hope someone makes tail-fins for the burnside…
Тnx
next engine swap
just some texures
you wont get a browser hijacker if you install mods from modland
tired of mfs saying that youll get ratted if you install mods from modland, no you wont thats just fearmongering due to the sites questionable quality mods
It's better just to install mods that are on the official BeamNG.drive website via repo and forums then to go on Modland for car mods.
We do that bc any good modland mod is probably leaked, and they are almost all bad mods
It also takes clicks away from the actual creators
i got it in blender but stuck besides separation
bro you really care about leaking? leaking is a part of the community at that point
Pay the people who deserve it
Is there any mod that has a 200bx AWD?
how would i pay them when they're literally lost to time
and most of the time their mods are private
What good paid mods are gone
If you can’t get it anymore, then sure that’s fine
But if it’s something like the Ibishu Signia, just buy it
not talking about the repo/fourms but rather the backalleys of beamng
anyone know how to remove extra spawn point?
anyone know how to fix the brightening glass ?
Indeed i am mentally insane
Christine
dont know for sure but go into editor at that location and delete it
it was an error in level info i fixed it thanks tho
Gave +1 Reputation to @storm hinge
alright np
thinking about making a "zero emissions" skin for this
Renault Kangoo Z.E. moment.
Think of this young hooligan, too.
I honestly thought it was gonna be a coal roller Scout
lmao
only made it because amazon vans are going electric and the scout is meant to be a 2020 van so it only made sense
jxjs
I wanted to put an automation engine inside this car, but its just not showing up.
Please help!
You actually inspired me for my next drawing project - the in-lore Christine - a menacing dark green 1958 Soliad Corohawk Landau. Thank you! xD
Gave +1 Reputation to @elder python
Now I wonder which cars, aside from the Fury to base it of off.. Maybe 58 DeSoto or Chrysler Windsor
What does the 58' Soliad Corohawk Landau look like again?
Well, it's a beam car of my own design - just made a very rough sketch. It's based on the '58 Fury and Chrysler Windsor. Overall is very forward look. Landau just means two door. When I got the time I'll start a proper digital sketch in Paint 3D
pretty much Windsor front, Fury rear
Ah okay, I thought it was a mod that was being made!
Hopefully it does!
and side is a mix of both
sadly I can't 3D model I just draw
here's my stuff up to now and sorry if some are terribly zoomed out
and yeah, I was starting a design for another 60s prototype but I scrapped that
I'm just hoping that in the future someone may make those tail-fins for the burnside like I was talking about before!
I feel the burnside is a design firmly rooted in the mid 50s. For tailfins to fit on it you really have to lower and widen and maybe even lengthen the body a bit
Like it's thoroughly stuck to the "bathtub" design of the 40s and 50s
For the moment, I did make a sort of "in-universe" version of, "The Car" from 1977.
Used the Moonhawk Executive mod and did some work with some of the parts in some areas.
ooh I think for a proper "The car" you really need a lincoln or something very 60s looking. I'd say even a bluebuck with some finagilling can turn into a nice alternative. But we sure need a proper 60s luxury sedan
Um... Well I don't really use it that often.
I did actually make a Bluebuck version of "The Car"! I'll maybe try and find some more bluebuck mods to help with making a in-universe version.
If only someone made some new facias for it.
It would be closer to a Bruckell, than a soliad
Soliad would be more like Chrysler/Oldsmobile, while Bruckell is like dodge and Plymouth
Wow, nobody has made a 460cui V8 for the bluebuck yet?
That's actually kinda surprising...
This is also because the lincoln used in "The Car" used this engine.
Weeel my Christine would be a kinda different car - see the Corohawk is no puny Fury - it's more of the Chrysler 300 letter series. And that I thought would be super cool for a possessed car. A sort of black sheep among the full sized cars, it being a performance oriented one
And the rough sketch is complete, I'll post it in #beamng-fanart
Well, I might as well make my own type of horror movie car.
Anyone got any ideas for any cars and specs?
aside from a hunted car I got no ideas
has the mesh got the same name as what you're trying to call upon in Jbeam? if the game is looking for a mesh with a certain name in Jbeam and it can't find it because the mesh is called something different, it's not going to render anything, so I'd chekc that
I don't know if that made any sense. I'm very tired
what is the fcv's filename
It’s Vivace iirc
can anyone help me with this texture issue?
not bad
Hello, how can i learn to design a new car??
The burnside wagon mod doesn't have an interior in the back, I can see through the walls of the car
Find the material and add double sided in alpha
What I did is taking the engine files and put it on the slot for the ETK.
I actually just had to wait a few minutes and it loaded in by itself lmao
anyone have any saturn mods? (like the GM car brand
As far as I know, there is only maybe one on midland and it’s garbage, also outdated and has an un edited jbeam
I’m also not a modder so I have no idea how to make one lol
Honestly I want to learn, just don’t know where to start
alr
look at other cars and see what they do, there isnt really a way to design a car, its all made by your creativity
well, what i meant by that is how to actually mod a car, for example i want to create the bmw e82 135i in beamng how do i do that?
you cant just start by making a full on car, its way to hard, you need lots of modeling experience and know how to jbeam really well
you need to know how to make support beams, you need to have a workflow, comment everything you are doing, make engines, transmissions, etc
okay what is an easier way?, i mean i have a bmw 135i mod and i dont like it, i want to modify it, is there a video to show how to change,add and create parts? and textures as well?
@latent ivy
your gonna need some work on that, it will take some time but sounds possible, get node beam editor, the official blender jbeam plugin and watch some tutorials, fillman86 made one and limitless pain too, they are both great, for the textures you should watch a uv unwrapping tutorial for blender also people in https://discord.gg/YZ4Ttnzc will help you with any issue you have
This might be a stupid question but why can’t you use the submeshes in blender as the nodes instead of having to remake the nodes
Greetings.
I don't know if this is the right place to make my request but i need someone to import this track into BeamNG since it is already available in Assetto Corsa.
Seaside Route 765.
From Ridge Racer.
the official page
@quasi vessel yo hows the vic comming
looking for help, currently setting up a button box to add some toggle switchs (latching on - off)
goal is to have front diff lock, rear diff lock, front output shaft, rear output shaft all on seprate switches (making a rock crawler sim) how or who would i need to talk to to get the ability to add the controls?
i was able to bind, park, start, rear steer, and home - spawn but the diff / transfer slecet would be huge
Anyone got a mod for like brake modifications arcade style
we need ambient lighting and working carplay for vanilla cars
Brakes that are immune to heat never wear out and u can modify the stopping distance in the config menu
theres no stopping distance thing you want, the brakes just stop the wheel, then that slides, the more powerful they are the easier they stop the wheel, try agenty op brake pads
Hello, i'm looking for a map like this, if someone know the name
or just if someone have a tuto for add countainer
Thanks
what do you mean by a map like that? have roads? be big?
no i talk about countainer
well do they move when hit?
Yes
then those are vehicles
it depends on the videos I see
you just spawn them and rotate those
On some videos the container moves and on others it doesn't
Someone make a white 2014 toyora rav 4
well they are sometimes vehicles other times they are actual map objects guess
you cant just ask someone to spend hundreds of hours to make a mod to you for free, its not how it works
It has to be white!
ill pay
pay what? 2 dollars?
no somthing better
also should be 2014 not 2015!
potato patatoo
still no one is gonna make it
very funny
now thats what i call a bargain
stop wasting peoples time
sorry
id say there are ppl doing mods, but if you dont want a shitty mashlap mod you need to pay about 100-2000€ depening on quality
^
modeling a whole car without any blueprints and just reference images is really hard
making it not have 2 million polygons is even harder
If you wanted to commission someone like Theo to make you a mod as high quality as his it would be VERY costly, and most wouldn’t do it because it’s not worth the time when they could just release a public paid mod and make more. Also it would take too long to be worthwhile so yea, you’d be looking at £2,000 and up I’d say, and probably no modder as skilled as that would want to do it
what about make a renault twingo for example?
5 million usd
i want to see you model a car without it being bent from a 3d angle
it would be hard
very hard without a blueprint
have this photo and try making it 2d in each side
any car you want made would be over 2000 pounds to make
is more smaller more harder?
no
oh
it doesnt matter
cars have complex geometry, loads of parts, interior, metal textures
plus the jbeam
what do you mean
model a lore-free car for beamng repo
then you dont need blueprints
because you make them
and its lore-free
and you dont need a reference image
lore free as in not lore friendly?
paid?
can you make a repo mod for free anyways
i dont think so, it would be hard
i can try custom configs
or try making an engine
you'll need good proportions though
you'll loosely base it off of a real car to at least make it look decent
then make creative liberties when the overall shape is done
hmmm, then lucas made the gavril scout, out of the fiat doblo or
other car that is european
probably yeah
ill use the old gen doblo then, for my car
if he eyeballed it then i'd be extremely impressed
go ahead
cool, i wanna model this actually
you have any experience?
well, no, this is my first time modellling
i watched a blender tutorial several times
but i keep forgetting how to model things
do i have alzheimers
idk
ill try
thats not enough
I have thousands of hours on blender and still can't model a car
oh
I’m not making you a Renault twingo
Anyways, who would make a model for that when sketchfab
That’s what you’d get, a sketchfab model on a covet jbeam
im making myself a renault twingo
and im trying to get examples and try to do it
atleast im trying to figure out how to
i didnt want you to do a renault twingo
i asked for examples
Fr🤮nch cars suck (except vivace)
gavril scout 2002
gavril scout 1.1 multifast*
multifast is a parody of multijet
Volkswagen Caddy
any one have any idea?
does anyone know how to make the DFA badges textured
It could be a conflicting mod, or it could be outdated
at exactly 400mph my car tires explode, any way to edit the cars code to prevent this
cars dont have code
change tires, get some drag tires
use meo's drag mod and change tires to those pro drag

i've just finished it actually, just loading in to check on how it looks
looks great, glad i did it yk
hey that looks awesome man : D
W
wheres the tires from the mod
when i shift into 6th gear it says this, how do i fix it 😭
Is 6th gear a higher ratio than 5th?
yea
It should be lower
For example if 5th is 1.00, 6th should be below 1.00
Is this for a modded transmission you are making?
no im just making the fastest beamng car for fun
it currently goes over400 mph but it wont bc tires explode and 6th gear wojt work
Turn the 6th gear ratio down
To like 0.9 or something like that
i have the uh drag mod pack but idk how to put it on the wheels
i cant find it in the wheel section
Check under the tires
thanks lol. I wanted my own personal touch to beam. really could do with a rhd etk800 right about now
Gave +1 Reputation to @proven barn
Has anyone ported the Burnout franchise maps?
Burnout 3: Takedown
Burnout Paradise City
i tried to do a livery once, it came out no texture

those are wheels not tires
oh i cant find em
make sure you have the wheels from the mod too
wheels should be drag welp wheels
anything with welp in it
oh how do i get the wheels cus all i see is 20x9
wheels
screenshot please?
i’m not home but if u go up in fhat u will see the wheels
^
oh didnt know you have a vivace, might not be able to see them without lug conversion
you can have for example an 8 lug wheel which is usually on a truck, 8 bolts hold the wheel, you might need to get a 5 bolt adaptor for it to fit
you probably have a 4 lug or 5 lug there, might need more or less
so how do i do that
meo's drag mod is made for the moonhawk and barstow from what I know
another mod
try getting a customisable tire grip mod, might help?
okay i will try that thanks
hey, ya'll, i need help finding a mod, if it exists: 200 BX tachometer UI
I might make a colision investigation unit Lansdale
I think i'm going to make the Ford Demonstrator instead, it's way more funkier xd
Thats a great tachometer, and i will definitely try it, but im talking about the one thats in the car of the "Taken Treasure" mission, or is it another car
Hey how does BeamNG handle really large maps?
depends on how your computer is
Aw man :(
Depends on the detail
When you get far away from the maps origin,it gets really buggy
Land of Sands is on the forums and it’s 500km x 500km
Everything starts to vibrate if you go 80km from the spawn
1000km^2 :)
I haven't noticed any vibrating on that map and I've driven a lot of it. It is heavy on my PC tho but that's cuz my CPU isn't the greatest
You notice it if you go to the center of it
It’s fine close to where the main spawns are
Oh o.o so if I make multiple spawns on a large map it'll mitigate that shake effect?
Nice
pretty much as the car is one chevron, its easier than the lincs livery i did
I'm in the process of porting a pretty large map to BeamNG and I need some help :')
I’m not exactly sure
I think it would be based on the origin of the map
I don’t think it works like that
I would mirror the hood text
i made it close to the real thing, it would look a little better if it was mirrored yes
so dose anyone know where the dae files are hidden in the latest version (autobello specifically) because i cant find them in
\AppData\Local\BeamNG.drive\0.30\vehicles\autobello
wrong folder
thankyou 🙃
also what is this (never seen this in blender)
cant see them properly for some reason
top right, set to object
you are the best
i stilll dont know how to sto- my tires exploding
@placid lagoon trying to reactivate the t series race addon bricks the game until you close it.
are there any mods that add 1st gen Ford Super-Duty (1999 - 2007) parts to the Gavril D-Series?
or 10th gen F-150 parts?
what does this have to do with BeamNG modding?
its a brand new and cool videogame
are you old enough to be allowed on discord?
it doesnt belong in this chat
please post it in #other-games
who?
you
please go take your dementia medication then
you seem to have forgotten where you are
how old are you?
you are funny
and can still read
👍 read this:
0 situational awarenes from gramps over here
and you how old are you? teen yet?
not possible
i have high school teachers younger than you
gramps is so naive lmao
great ahah
you dont even know how to solve an equation lol
thats cap
where are you from? europe?
🇷🇴
spain 💀
whats the problem with spain mate?
i live in spain with out the a
what about the gta sa?
im pretty sure theres a garrys mod map for that
who's garrys?
https://store.steampowered.com/app/4000/Garrys_Mod/ its an old Source engine sandbox game built on top of Half-Life 2
Garry's Mod is a physics sandbox. There aren't any predefined aims or goals. We give you the tools and leave you to play.You spawn objects and weld them together to create your own contraptions - whether that's a car, a rocket, a catapult or something that doesn't have a name yet - that's up to you. You can do it offline, or join the thousands o...
$9.99
865467
released way back in 2006
its not finished tho
and progress is currently halted due to performance issues
Oh alright guys
Btw sry for starting with the wrong foot I misread
Btw guys does this game have cool deals on Christmas? Like 50% off?
maybe
It gets discounted around then
it gets a ~20% off around that time yes
Oh alright guys thanks
Gave +1 Reputation to @cyan drum
is there a mod like this?
i mean, there is the DFA pack, but thats GM
Miovi Stella Coupe
the JBeam is next
then the bodyparts,the engines and the rest
the mod is inspired by a Concept made by UAP back when my father was working there
I’ve got a question, is it possible to put a motor from one mod to another? I’ve got this FD car I wanna try and copy and paste the motor to this FC mod I have.
Yes,it's pretty easy
the worst part is the transmission in my opinon
Any videos on it? Or just a simple explanation like literally copy pasting from the mod folder etc. I’ll take a look when I’m back home from work, I just started venturing into messing with mods. I’ve been going through and fixing all my rear race coilover problem cars
"the engine you want to put": {
"information":{
"authors":"BeamNG",
"name":"engine name",
"value":3800,
},
"slotType" : "the car you wanna put in_engine",
"slots": [
....
],
"powertrain": [
...
],
...
if you want more info you can dm me
Sweet I’ll load up bmg when I’m home and try it out, wanted to ask here before I check out any videos and will do if I run into any questions I might have. Thanks 🫡
Why does my paint tool in the world editor have such a delay?
anyway how do i make my car so much more stable at high speeds, and why does my car want to turn on its own when its accelorating?
Stuffer suspension helps a ton
Adjustable angle spoiler, front ballast, front splitter assuming your vehicle has these. Also yeah, race tires.
how do i change my angle and ballast
there's an ajustable Spoiler for the 200BX
Someone help this dude out! 🗿
Thought you meant like something in the realm of a 200bx
im aiming for 500 but its so hard to keep stable
15k rpm?
a billet engine
i mean cyllinder number
4 or 5
are you some kind of Koeningsegg engineer or something
yes
@lavish goblet also consider the capabilities of the vehicle. If you wanna do stable top speed think of it vs something that’s made purely for speed. So also like longer wheelbase, extremely stiff suspension, spoiler and canards. Like a drag car
ah how would i make longer wheel base, i also have 100% camber
at that speed it better just to make a Dragster with a Fiberglass shell of a Vivance
You would need to physically stretch the car out lol
The rabbit hole goes deep, I wanted to just mod crawlers now I’m building 4 cylinders and driving down mountains
how do i get a car model from a mod
Go to the Mod file search for DAE files
for example
midsize.DAE
I'm gonna have to see if I can recreate this Kawasaki Teryx4 with the Hirochi Aurata...
Sadly it won't be a 4-door, but eh.
:)
e
i don’t think there is
maybe the gavril scout but it’s paid
:(
i have it but is not armoured vehclie
technically the cargo variant can be
meh
Ye i like this car but i would like to create the VBL thats will be me first mod ,_,
what do you mean ?
seems pretty normal to me
oh 😄
2 doors only
I meant normal cuz it looked like a normal map, my jokes are unfunny -_-
i think it is another car, from what i remember
Yo
i have 2 options for the MioviCoupe
the easy one: the RX8 way of Coupe
and the harder:Normal way
what car
Any car
go to C:\Program Files (x86)\Steam\steamapps\common\BeamNGDrive\content\vehicles
there you have every car
Ok
How do I copy to lender
copy the Zip you want,paste it on desktop,extract files,search for a DAE file
Open blender,go to file,press inport DAE,Search for your DAE file
Collada
i'm certainly giving something a try, a lightbar. i actually own one of these lightbars irl, so this is easy to get references lol
are you the police 😂 ?
haha, it was given to me. it's off a Greater Manchester Police Range rover from the 90s. not the police lol
https://www.beamng.com/resources/demolition-derby-the-fair-grounds-demo.1784/updates this mod aint working for me is it posible to play it on a older version
It seems to be broken
If you get an older version of beamng, it might work
how tho
There’s a couple tutorials online about how to downgrade game versions on steam
is there any way to set the default render distance of a car higher?
Has any one had luck adding controls
Damn, are you comming back to modding?
moving more to work with lore suff ig
Great to hear, just modifying stuff of vanilla cars like bastion coupe or youre planning scratch made vehicles too?
no, this is wrong, that's not how a coupe looks
only modifying existing ones yet, i'm training modelling to get better
did you just chop the car?
anything behind the fenders is not anymore bastion shape including windshield and a pillars
is the car any shorter than the sedan?
yep
so the wheelbase is smaller
if you look on google, any sedan that's also offered as a coupe shares the wheelbase length
yes, would say round about 30 centimeters
law is back! How are you law?
hi i'm fine
how about you
im good, thank you
just saying that you are commiting the same modelling sins as filman86 or anyone who doesn't know about car design
he's done a bastion coupe and it looks pretty much like yours
i don't know how his looks like never saw / used it
he probably means it's too short and it looks cartoony 
could be, for me it looks fine, idk
The only thing that looks off is that the truck seems a bit short
I dig this
Concept V10 edition would actually go crazy
How do you get Crash hard 2.0?
search up "crash hard 2.0" in the repo?
its not hard to do
i did just its not giving me the option to activate it
Just install it lol, you don’t have to activate it
what do you think beamng should add that would make things better
Mods are automatically activated when you download them
Better sounds, and more interior stuff
Hello, I'm here to seek help regarding a skin in BeamNG.drive. I've created a customizable color skin for the Covet, and it's working well so far. However, I have a small issue: the bumpers that are supposed to be made of plastic are automatically painted, as are the trim pieces. I'd also like to have a fixed image that remains unaffected by the color changes. I haven't been able to find any tutorials on this. Thank you for your assistance.
I think the issue might be related to the materials file, but I'm not entirely sure.
I will probably only respond tomorrow
Serenity more like SereNOty (but seriously where is everything)
loading
it has been 10 minutes
miovi Coupe no longer's a hatckback,now the backlight is attached to the chassis
this part isn't specificated in the schematics of the Dacia Concept,but it's nicer and more similar to Dacia Sport 1310/1410,who played a important part in this abandoned concept created by UAP
For a second, I thought those were the lightbars used on the Ecto-1 for a moment...
LOL
Just thinking about that kinda reminds me of how there weren't many halloween mods this year. I feel like last year had a few more, but I may be wrong.
Where do you even get those
a lightbar? it was given to me for free
anyone know some good mods for 1950-1980 vehicles?
tailgate is done
the suspension is next
is there a mod for a liscense plate flipper
nem
what
no
is that a paid mod
Nope, you can find it on the forums and in the repo
oh ok
Why does my paint tool in the world editor have such a delay?
to load,yk it takes time to change
how can I add a fuel station filling point to West Coast race track, rather than having to drive out the circuit to the north station?
What does the description of the mod say
"Oh the weather outside is frightful"
Are they skins?
I checked there too and didn't see no snow config
The mod's thumbnail has the wendover in it so I checked there first
It says it's "skins" but I don't see a snow skin
Do you see it in the skins section of a car
Skins = paint design right?
Yes
beamside police moment
Wtf
301
301
301
301
301
301
301 configs, are you insane
Most effective way to get moderator attention
301

The most configs I have on any car is like 124 for the d series
Anyways
press it
Minus the Autron cvp with 227 configs
best role
Guys please get back on topic 
Yesh please
You started it.


good job
Anyways
Welcome back
Anyone have any Mercedes mods sedans?
Go to modlands
(DO NOT)
Why
I don’t know of any good ones
Modland sucks
Where should I go?
Beamng forums and the repository are the only place where you should get mods
Yeah I was being sarcastic
the beauty of making a police car with a sunburst. crash and die. it was a fun experience making all the like lore friendly logos etc
i'm thinking about doing some more, for the pesimas, etk i etc. just to see
Sting
yuh
Shut up I have the expansion pack installed 
oh wentward pack
wrong channel dam
