#mods-discussion
1 messages · Page 63 of 1
About that, the Vertex Airlines should be re-named to Vertex Airways to match the livery (very nit-picky, I know)
Are you planning on a Mustang Gt swap for the Bolide?
I have a question regarding USA West Coast Drag strip map
How to make the drug race Christmas tree works in multiplayer server ?
wendover v8 swapped bolide thing
🤔
But sure I suppose
Hard to describe.
Thanks
Gave +1 Reputation to @wild raft
i need to make a twin cylinder engine swap bolide one day
i am uhhhh
Any one can help with my question?
Ah yes, my favorite 200FC.
inishell d
Sadly not
Haha, Wendover V8 into Modular goes brrrr
im surprised no one has made a private jet mod
the maps are too small
not really
well there are custom maps with very low detail for high speed flying
should i trust this?
the jbeam looks very custom, openable panels all that stuff
just need some opinions
One message removed from a suspended account.
okay thanks
is there the PHEV or just the 2.0 turbo mild hybrid
One message removed from a suspended account.
ok
how can you get the old version of the Vertex?
Do not trust ANY paid irl mods
Forum thread
How is the jbeam? As in image-wise
It's not paid though
Thank you
Gave +1 Reputation to @wild raft
You can just „pay“ 0€??
Yes, I guess
Bruh
I think it's just to facilitate "tipping" the modder
One message removed from a suspended account.
CTRL B for beams and CTRL T for triangles
you also should have a debug menu on the top menu bar of the parts selector
if not, you can enable something for that in the game settings
One message removed from a suspended account.
Certainly not the worst I have seen. How does it look below? Is it body on frame?
One message removed from a suspended account.
Is there a frame you can rip off?
One message removed from a suspended account.
Ah, seems like it's... a Vivace
One message removed from a suspended account.
One message removed from a suspended account.
you have no idea how bad ive been wanting to do that. i can do jbeam sure but i cant model
It's just a Vivace but the XC90 is not a body on frame anyways, it's unibody
Thought I wouldn't get it as it's low quality and from someone with doubtful reputation
ayo
Ok that sounds quite cool
Now it feels like Voodoo.
That sounds worse at higher revs (imo)
@frank kelp considering the massive number of Scout mods that are being made, do you plan to make the demo a separate vehicle ?
Please yes, it's annoying when the demo conflicts with the full mod like in the Signia
I'm concerned that people will be downloading the demo and all these extra mods instead of actually supporting you
Hey guys! I recently started swapping engines from different vehicles (by copy-pasting jbeam and texture files) and I got an idea. Could I use a similar process to install the 30mm cannons from the Me 262 mod to the Strato HMX 920? I think it would be interesting.
That can still be done with the Picnic, just requires some adjusting in names and such
That was already planned yes, kind of the way the picnic is doing it
Aight
Why does it sound like this in this game
https://www.youtube.com/watch?v=yHcENBMfCK8&ab_channel=robben896
but like this in beamng
i disabled fmod in beamng so i could hear the pure sound files without any fmod filtering to compare it to rf
maybe i set the rpms wrong
it sounds like s*** in beamng
I think its just too loud for the filter in beamng?? why is it distorting so much compared to rf?
sounds like a mess. Im sure i set rpms like rf.
Hm, I like how it sounds
yea but its messed up im trying to figure out why so i can get it to sound like rf above
i think i made wrong rpms since i used better samples then was used in rf and they have different rpms
I see you always use rf 1 sounds, they are good for BeamNG?
(rust interesting)
it should sound like rf i did something wrong
@vocal cobalt V6 with V8
Sounds better
Compare the suspension and drivetrain
And no idea how to describe this.
Honda NSX moment
Its not 200bx anymore
Does anyone know a good quality mod that is similar to the Grotti Carbonizzare from GTA? (Free or paid.)
Raven R20 or Convertible K Series
I rather take the Convertible K-Series then the crusher worthy Raven R20.
Theres also the Bruckell LeGran Convertible
and the SBR4 convertible, thats probably the best
https://www.beamng.com/resources/hirochi-sbr4-facelift.18635/
What the does the Legran convertible got to do with the sports car?
I was just suggesting convertibles
The old CCF2 is not as good as the SBR4 Facelift
Quality wise
Well, I mean the new CCF2.
Its not out yet
Well, when it's out.
Yea, I was just trying to give you mods that are already released
Well, whatever works for now atleast.
Best options are CCF2 and SBR4 Facelift
I would rather take the CCF2 (old one for now, remaster when it's released) then the SBR4 facelift.
Does anyone know any good mods that can make a car more personalized? Kind of like ETS2's interior customization
The irony is
||They're both by the same guy||
Really?
Mhm
The difference of using Dev Jbeam and your own
hey does anyone here know where i can find good textures for beamng drive
Anyone here knows where i can download trusted mods ?
i forgot Theo made the sbr lol
No like actual cars
something like a dodge challenger
Check the pins
Do you think anybody is going to make a speed racer mod soon? 🙂
Very very very unlikely
Ye
i can vouch for that and it is pretty good, not the greatest (like the openable hinges suck) but it is something
still planning on whether i should try and add an electric motor at the back and a battery pack to make it an actual phev cuz there is a phev config with only a more powerful petrol i4
my only experience with lua is roblox
🤢
Might be able to help 🤔
I'm still learning but might be able to figure out how the PHEV logic works irl and swap it over, I know of a few hybrid systems that have been made now so it's possible
https://www.youtube.com/watch?v=UwYV1i7Ejgo i think before doing the PHEV, I need to figure out how to add the supercharger first (so far the XC90 mod has turbos only (though they did remove the supercharger for the PHEV in 2021 with the recharge)
Our most advanced engine ever. Presenting the T8 Twin Engine, part of our ongoing pursuit of cleaner, more efficient driving. http://www.volvoca.rs/0qpxx
why is the etk800 series or aka the Suv etk mod broken
mainly old textures and parts sharing
i did redownload it a few times so
since the 1300 suv uses a lot of the 800's parts, that probably broke the mod
same goes with the 2022 procyon Centauri
wait how is that broken for you?
it doesnt show it
Oh yeah there's a guy that makes mods for beamng, and they work well. I have his Dyno and 2 post lift mods and they work
It's through a Patreon but i think it's worth it
and there's only the USDM mod version without a picture in the category for cars
where did you put that mod in the files?
just simply on the mod files
and whenever i start beamng its like stuck UI screen
you didn't put it in the repo subfolder?
i downloaded thorough
beamng itself
very weird
yeah
very weird very weiird
so i kept redownloading it which yeah
why is there a v10 sound ingame for me
aight i need to delete some mods jesus
do you put your mod zip files downloaded from other sites to the mod repo subfolder in the mods folder?
oh wait
Repo error"
@latent ivy did you clear cache
how
start the game up and click support tools
then click clear cache (if your game is very broken, use deep cleean cache, otherwise just use standard)
nevermind
thank you it WORKED!
Gave +1 Reputation to @timber heron
Hmm
8 seconds · Clipped by CarTMatt · Original video "Why We Dumped the Volvo XC90 | Pros and Cons" by savagegeese
close enough innit? https://streamable.com/qxongs
I never saw that :0
I’ve never crashed unless I crash deliberately, when my pc is fixed, i will crash it deliberately.
its not included in the original mod from the looks of things
any thoughts? i feel like it kinda sounds too much like a flat 4
And is the odometer not saving issue fixed on that mod?
I can't sell work for a paid mod, lol
It'll either be made public as an add-on (with permission) or included into the mod itself if LBE wants, as my plan is to send it to him soon ish
Just have some bugs to iron out, i.e. it's not differentiating between tailgate and rear barn doors, and the sounds won't play after you drive off
Odometers not saving is a game thing, not a mod bug/issue. Some mods have custom Lua to save the odometer value to a JSON file but the Scout doesn't have that.
anyone know where are the dae files for the cherrier FCV's chassis parts are? I can't find them in the vivace zip file
Checked common?
i opened the common folder, couldn't find it there either
There this one mod of an early 2000’s Chevy Silverado, could someone find me it and link it by chance?
The chassis is on the main dae model. Just import it into blender and delete everything else to see it
wait, is this in the orig scout too?
@wild grotto
ohhhhhh
When the RS6 mod gets released I Dont Care im driving it on every map I play on. Who else will?
wtf why is my mercedes windshield have wrong textur
nvm tints fix them
after 15+- hours of work then starts on pbr stuff, I throw this map in the trash way too difficult and nowhere to find any info
When the Scout demo gets released, Can it's addons work for it too just like in the full verison?
What RS6 mod? could you show?
Probably would work only for full version.
Does anyone know how or if i can save a freeroam preset(its a race) cuz i dont want to set it up everytime i crash or want to restart or play it later
Vehicle config > Save and Load
but can i save so all the cars just respawn?
Ohhhhhhh not really
depends, if the demo will have the same car name, for example scoutvan and not scoutvandemo or something else then sure it will work
@fast kernel in relation to #mods-discussion; what specifically? A cluster screen would make no sense or be that doable in such a basic & old car like the Bolide. A chime for headlights and/or seatbelt, doable yeah.
Chime for headlights and chime when you turn on the ignition (like on Porsche)
Thought I would make this for fun, plus Porsche is my favorite along with Mercedes
In theory it's absolutely possible but logically not sure if such an old car world have them?
It's 2 am and I'm in bed rn
Well my idea for Bolide mod is basically a refresh series until Mondello release.
Interesting, probably doable then + maybe with an early LCD in there for odo
Mondello is cool
Using Esprit series as reference.
Bolide but like the one on the right would be hot
That’s the hardest part - to model a bodykit that would look stylish and modern enough.
I know, I’m looking for a solution.
But at least technical part is almost done.
Still need to redo a few things.
Thicc tires
Does anyone know of any school bus mods that aren’t the outdated fs65 and the van bus thing
It will be a different name
Wait no that’s not even a school bus lmao, that’s a skin
Its the best one I can think of thats not leaked, outdated, the ones you already mentioned, or on modand
Are there any servers that make them? Even if they’re paid mods
I don't know any off the top of my head
Ahh okay
rate my new car🫶
👌/10
me and you took two different routes but 8/10
how can i make a hightmap from my map for texture?
or make a map for colering dirt sand mud/rock?
so far so good now just colering texture no clue how to do that 9 hours for grass only i love pbr grrr
How hard would y'all say it is to make a skin, as me and loads of people I know really want one
Anyone know if there is a mod for this? With a 3.8L V6 if there is just @ me
What kind of skin?
Well like police and sherrif skins from another game
enterprice rentals
Why is it so difficult to make interior in automation?
The bad resources and tools it gives you to do it
What if🤯
Im so excited for the future of the 6 rotor mod for the 200BX
Its in a rough shape right now, but its at least a functioning mod, and a good place to start. Ive been wanting rotary swaps for the 200bx for years now!
Cluster display now changes based on what you have equipped :p
enterprise: 😡
Give mod rn in DMs
Haha
Just in case you legitimately didn't realize, it's a paid mod he's editing.
I rlly didn’t realize 😭 thx for telling me
Gave +1 Reputation to @lapis sail
its not released yet evan
hi im new to beamng
dose anybody have beamng mods]

Does the scout have a rollcage?
You have to make blank materials for each
I can recommend Gimp for that for example
we all do
Yeah sorry, I was on VR at the time hence no detailed response. It's a modification for the Scout which is paid; at the moment can't say if it'll be released or not
@restive forum I do
finally got it working (i still want to figure out the drivemodes (pure, hybrid, and power modes) as well as the shiftlogic of the motor)
Who wants to make liveries of these lol
mondello
ty
thx i have done that now and for hight i have made screen shot from top of the map and oa and r maps i have made from that screen shot and converted in photoshop is there a good way to get a high map and how can i make easy dirt roads on my base map
Gave +1 Reputation to @sweet jetty
Does anyone is good with terrain editor ?
Map editor is terrible 😭
I only have low texture (I have a full quality on my PC , but BeamNG take onle 4096px), Forest tool is lost with trees file ...
If someone can make a good YT video to show how to use it well , it can be cool 🙂
@fringe gate would it be possible that you add a gradient to beam edition cars to separate them from normal ones? (forza example below)
Not really, the UI app's menu is the only place where they'll be shown, maybe when changing vehicles you'll get a popup message as well showing which boosts are active
Adding an outline like that in the actual vehicle selection menu would be possible, but that would also technically be changing the base game, which is not allowed for repository mods
oh ok
i have sucsessfully landed my gavril vertex
“DEMO”
rip
couldn't that be done editing the preset pictures?
Have you used the airbrake?
if possible i have a suggestion of a fiat punto mk1 mod
Similar mod: https://www.beamng.com/threads/cherrier-picnic-92-03-paid.84800/
Free demo version available
Could you make Xenon headlights come already installed on the vertex airlines config? imo it would make more sense.
they are on the repo too
Hi, How can I add a loading screen to the game by mod?
You ever wanted to change the background images? Well if you do, then here's how to do it.
HUGE THANKS TO:
https://steamcommunity.com/sharedfiles/filedetails/?id=2932653984
This video wouldn't have been possible without it. Give all your steam points to them.
Music:
https://www.youtube.com/watch?v=6FNHe3kf8_s
https://www.youtube.com/watch?v=TW...
That is just for replacing the vanilla ones
One sec lemme write out how to add ones to a mod
Isn't that the question?
It is :P
Ill leave you to it then
Also, what's the map used for the loading images?
I though about the thumbnail map but that doesn't have the concrete glossy floor
idk
Is this reshade?
nevermind, figured it out
In your mod, create the following file structure
ui/modules/loading/drive/
(So in the same place where you would have vehicles/ or levels/ etc., you need to make the ui/ folder)
Then in that drive folder, put your images, with this naming structure:
drive_loading_X.jpg
where X is a unique number between 1-20
So for example you could use
ui/modules/loading/drive/drive_loading_1.jpg
ui/modules/loading/drive/drive_loading_2.jpg
ui/modules/loading/drive/drive_loading_3.jpg
Keep in mind the game will load these instead of the vanilla ones (which one depends on the number), unfortunately there is no way to add more (just changing the number to 21 or higher doesn't work)
Gavril Scout loading screenshot, for anyone interested :)
I'll make one for the picnic, too
Done
i kinda like the proycon centuari more than this intierior
Ill make one for the procyon
😐
One is a utility van, and one is a luxury suv.
Learn the difference.
True lol
@frank kelp i would maybe increase how early the windshield shatters, dev cars would be already smashed when in tis stage
“I think the 2022 Audi A8 interior is better than my 1996 toyota van”
🤷♂️
i paid for it since it looks good
Thx
Gave +1 Reputation to @ocean mauve
sure
how do I just add them, not in a mod, just add them in with the other ones
also, go to #screenshots for more of these loading screens
how do you instal the gavril scout? ( i dont find it on the repo)
its a paid mod, on gumroad
😭
Done, sent it through #screenshots
No problem! You can use decals
for making dirt roads
and ofc paint dirt with brush
Good marketing moment
/j
You don't add things to the game files.
we need wheel motion blur inbeamng
there seems to be something wrong with that, since I replicated what you said 1:1 and it does not work after 10 minutes of repeatedly loading the grid map 100 times
and yes, I did restart my game after doing the changes
i feel like someone will get this reference
In that case just follow the tutorial MarkTheGuy sent
Hmmmm maybe the mod I used as an example was overwriting them on purpose (it used numbers 1 2 3). Maybe give that a try?
but I dont want to replace them, I just want to add more
I have no idea who's the owner of Gavril scout, But his/her's mod can be downloaded for free from modsfire
they better fix it, if they wanna earn something
@frank kelp
I'm aware of that
Unfortunately I can only take them down when the website owner sees my emails
And sometimes it takes a few days
I send emails daily to get reuploads taken down, it's starting to annoy me a bit lol
a bunch of euro vans, but the proportions are from the mk5 caddy
Nice,
Unfortunately it seems the game only loads numbers 1-20, so replacing them is the only way
Well made mod.
mans probably sent 80 emails
Add one more 0
where can I find the loading screens then so I can know which ones Im replacing
the three magic numbers on your credit card
Steam\steamapps\common\BeamNG.drive\ui\modules\loading\drive
I am not sure tho
That's correct
if i paint dirt it gets green i need to now where my color are on the base_map texture
Yep, you have to make a blank brown-ish base material
i have now a dark green/brown base material that looks good to start but on my map i have sections of rocks and dirt road made but not on the map material how can i get them on my base material
Hi, does anyone know some good supercar mods?
it can go like 600speeds that is like 69 times fastrr than a bungati
why does every youtuber have mods from modland but no virus?
Because modland doesn't that many viruses
Just a lot of low effort low quality mods
Often with stolen models
But I've tried it before and immediately got a virus message
Do you think every link in a video description is safe?
Because I tried it with a mod that was on the homepage of Modland
@feral pawn Hello there, Blasconiar sent me your torque tube model and I was wondering if I could get permission to retexture it (because it's rn a grey mesh) and release it in the repo with my Scout addons mod
Thanks
Gave +1 Reputation to @feral pawn
(Soz for bot double ping)
I have no idea, I don't use modland, for the reasons I listed above
Ok, thanks, I'm just asking because I'd love to have more HQ mods
Gave +1 Reputation to @ocean mauve
Stick to the repo and forums then 🤷
https://www.beamng.com/resources/
https://www.beamng.com/forums/
High quality mods certainly aren't found on modland, unless they're stolen
Is anyone else’s gumroad not allowing you to buy the gavril scout? I’ve been able to buy other mods just fine but it’s not allowing me to buy this mod. Anyone else have this problem?
Does anyone know how to increase torque without increasing power/horsepower a lot on the RK mod engines?
I'm trying to get 115 hp and 270 nm out of a 1,6 I4 diesel
Can anyone explain to me if it is even possible for a beamng mod zip file to contain a virus?
I don't see how that would be possible, since you aren't really executing anything
they dont
dumb people just download exes and thinks thats how mods are installed
so they end up running the exes
Makes sense
but it's incredibly rare unless you go to the deep depths of modland to get a virus
I already thought something like that, because you aren't really doing anything with a zip file except placing it in ur mods folder, so you wouldn't be directly running an .exe file
anyone know of any good BMW mods? maybe like the 2022-2023 m3's
Does someone know why my post is still pending moderation?
I think i am following all rules
My first post had the same issue it never got past "pending moderation"
idk i have downloaded mods from thise shady sites (mostly to make fun of them) but yeah never got a virus
to be fair i do use adblocks, have windoes security turned on and also generally don't open files like this
the mods themselves don't seem to contain harmful files but if you clicc those shady links to russian women near you in the side good chance you will get 69420 virus and several unwanted illnesses
And sometimes those mods can be poorly made and reduce game performance too
also never use the auto installers, they likely inject harmful files, i always download zips and manually install @mild phoenix
yes they have literally no idea what they are doing lol i am surprised they can even make thumnails that look somewhat like a functional car
the meshes are also lkkely poorly optimised with useless polygons and unnessisary materials eating up memory
A lot of those mods have overly detailed interiors (that don't have functionality) because they use ripped or overly detailed models
Please help boomer alert. Basically im new to this modding. and beamng. I have downloaded the latest version of crd monster trucks for my son. I can see it in the repository. i unpack it....but then it says OPEN IN EXPLORER. As you can tell i have no idea what im doing, can someone please help. Thank you
you have to have some intelligence
click on the download and it might take you to another site that will give you the link, after it takes you to that site, do not download any other popups
Im not sure im following you. sorry im new to all of this
if you got it from the repository, there is no need to 'unpack'
just subscride and download and should work
when i click on it it has options like deactivate, pack, delete open in explorer
its pretty simple actually, the unpacking was unneccessary, just cut it from your downloads, paste it into the mod folder, then your good as gold
youve overcomplicated it for yourself
yeah dont unpack it
what id suggest is redownloading it, getting rid of the unpacked version, and then just put it in the mods folder
unpacking is only for when you want to change the internal files, lets say you want to double the power then you will need to unpack and edit the engine jbeam
boot up the game
sorry guys i sound so simple
Pictures
unpack and repack basically the game just zips and unzips the mod for you, super handy really
its that simple
Is this enough? do i have to add more?
It's recommended to have decent pictures to show off the mod
i have just started the game again but still cant find the cars?
enjoy the dolphone,exe
Might just be a broken mod then
dolphin
dolphan
dolphon
do doo do d o do doooo doooo
can you show us what the vehicle selection shows you
It was from beam monsters site so sems legit. and yeh 2secs ill screen shot...
this
and this
Figured it out, it was because I was using png files instead of jpeg
yeah theres the issue, Beam Monsters isnt an official site and isnt confirmed to be safe
ahh ok. Is there away around this
well all i can say is if it aint on Beamngs official website, as in the repo or forums, it probably aint worth your time
bugger
I would also do a deep virus check whilst your at it, since Beam Monsters sounds shady
https://www.beamng.com/resources/monster-mega-pack.19220/
if its monster trucks your after, this may work
just use the in-game repository or the official forums (for irl cars)
i was just about to ask for a link, thank you quattroporte
Beam Monsters is anything but shady
They have their own website with over 60k forum members
the link works fine thank you.
Ive never heard of it, and this site rightously toots the "if it aint the official site its terrible" horn so
ive seen this one
ok
Made this awhile back
does anybody have a dyno mod?
DrowsySam's Patreon
thxä
does anyone know any good drift car mods
now doing this part of Nevada
oh boy I cant wait to throw my hypercar off the road at 250mph and flip it on its roof!
after the 0.28 update most of my mods have broken texture and glass is there any fix to it ?
Are there any coach mods behind developed or put there?
InnocentJ0ker's Bugatti chiron mod
https://www.beamng.com/threads/2016-2022-bugatti-chiron-update-v1-3-released.88889/
You sure that ol' Picnic is gonna be enough for a Fiat Punto?
It's similar enough I guess
still so much easier to have a button on the side of the screen to click
Could you do Ibishu Claria and Ibishu Signia and Civetta Mondello loadings too?
mondello and claria loadings are in #screenshots, ill do the signia in a bit
Is there a good ai mod?
Configuration mod idea for Ibishu Signia.
Barn Find
"An old Ibishu Signia that has been left to rot in some dude's barn for a long time, Rust and dirt is everywhere especially including a faded paint job and the interior is completely trashed as various animals such as raccoons completely teared most of the upholstery and there is a mice nest in the trunk, It's also been used as a target practice vehicle at one point which could explain the couple of bullet holes on most of the sides of the vehicle, The engine barley starts and runs as most of the engine has completely rotted out and there is even another mice nest on the engine which the mice had chewed some wires that are important to the engine, Will you ever try to get this lost Japanese icon from the 1970s to ever run and give it a complete restoration or this will be a lost cause which means it will end up being part of a junkyard and then scrapped and crushed?"
Does anyone know a sound mod that has a turbo diesel howl sound? like this https://www.youtube.com/shorts/hTkR2ck75TA
ngl sounds like a offbrand turbo off ebay
Does anyone know is there a way to change the sound of a dsg fart to some custom one?
or atleast if anyone knows how to implement it i have a howl sound that was working on an older mod i have
schwerin stuff?
Wheels
Answered your own question
yesn't many mods on there are for very old versions and many of them are ripped versions
Modland can be ok there is defo more updated cars on there and that work but if you are going to download from there be careful and obnly download from bigger creators on there cause there is some people that decide to be dickheads and insert malware
alr thx
Gave +1 Reputation to @exotic flower
but the repo is also good and look on the beamng forums
There is only one mod we need but don´t realize, Sound systems in Beamng, like the Gavril Vertex, But the Gavril Vertex does not have loud enough sound, We must make a mod that makes sound that can shake the car, and has tunable sound levels. Now that would be cool
Speakers in Gavril Vertex don´t shatter window
Big sad
And the speakers in gavril vertex don´t move And nor does the car
I can find 3D models and Textures but I am not very good at modding
I can model, just not make it actually work
wait is there radio/music in the game?
oh im too tired to be on here i saw gavril and thought "wait vanilla?"
yea
Speakers in cars would be cool, And in the trunk too possibly, All music mods I found have no actual effects and is not as loud inside of the car rather than outside, and does not shake the car (Big sad)
I can only find and make 3D Models, not create so I can´t do it (Bigger sad)
yeah that would be awesome to have in the game like having 2 12 inch subs in the rear making the trunk vibrate and stuff
Yea
This is because most audio processing isn't adjustable. The most you can do is lower the volume when outside the interior sound box, and slowly decrease that with distance. this is what I did with my radio mod
https://www.beamng.com/resources/zeit-radio-the-zeidio.22603/
ooh
Speakers can't properly be simulated either because you would need multiple audio sources, which can easily de-sync on the long run
yea
and shaking the vehicle nodes without breaking all beams, or glitching it while its driving may be hard, but the Civetta Bolide has interior shake so somehow its possible
but syncing it with music
hard
also if you want an accurate representation
you'd need to take vehicle sound insulation etc. into account
yep
While it would be possible to jbeam the speakers to move it wouldn't be plug-and-play as the amplitude data isn't available so it'd have to be saved separately in let's say a 1 by X png, thus taking out the support for people to easily add their own songs
I pushed mine to the limit; it extracts the metadata from MP3 files, including cover image. more simply cannot be done
custom songs would be very hard to sync with vibrating car
would have to be preset
to be better unless syncing with music is gone
not very hard: impossible (for modders at least)
I for sure can´t do it
Modders also cannot set their audio sources to be influenced by the cabin filtering, or any filtering at all. Notice how the light runner music has a cool radio filter but custom sources dont
yea
It's very limited
it might be possible
Isn't a lot of the sound stuff limited?
with limits
Yes, since we don't have access to fmod
A good example are horns: in fmod you can specify a start sound, a loop and then a stop sound. We can't do that
Same goes for reverb, btw. if you drive into a tunnel your music gets reverbed, lol
so... this would be insanely hard to do to impossible
Is the kjlp mod pack broken the steering wheels never show up
One of the sound guys said the tunnel effect is faked currently
yea it is
Ehh sorta
I guess what they mean is that it doesn't change dynamically and instead is dictated by areas placed by the modder
quick question is there a mod for beamng that makes the diesel smoke darker and more realistic looking?
Hi, anyone know link to download this map?
I refuse to give up on the car music mod, so
I will try to make it
so it will be imperfect in every way but work
Nice
I love this
Does anybody know the mod that adds NASCARS?
thanks friend
Gave +1 Reputation to @lapis sail
We need a 1:1 creation of Germany, with the autobahn.
I would pay for it
With working traffic
Imgui to control time and if the autobahn lane is speed limit or no Speedlimit
(Make sure there is no traffic in the speeding lane)
Why is the desert expense map reverbed? The entire map is reverbed XD
good luck trying to run that on an rtx 4090 ti and amd threadripper
an 8km x 8km 1:1 recreation of my hometown could work cause it’s rural but it would take me ages to make it look presentable
I must disagree. With the map it's almost purely visual, while jbeam on a vehicle is not at all visual. Take this from someone who can't even scratch jbeam a cube properly.
even then i don’t even know how to properly get an irl heightmap
What I’m trying to say is, you have to the traffic lights which work, led Speedlimit signs which glow in the dark. Ai paths etc😅
It's stil visual
This is the amount of code needed to make my GoPro work
Oh, wait. That's only one of the files.
oh
And I'm not actually even done with it yet.
This is just for the V8 and the sound damping system on the Bolide mod.
Okay i get it😅
does anyone have a link for decent monster truck mods? thank you
A 1:1 recreation of germany?? Do you want to download a 10TB map??
💀
Man wants his pc to run at 144 seconds per frame
🥶
nah, thats too fast
1,7 frames per millenium is the limit
Why not, we have Antarctica already, we need next level 😂
wait, the antarctica is 1:1?
Who cares
hm
Ok. No. One. Will. Do. It.
You wouldn’t do it for 10K?
You got no idea of map modding and how much effort it'd take to make a 1:1 IRL map of a whole country
Ok then 50% the size of Germany
Not to mention you'd need endless computational resources that don't even exist yet
5TB
I just want to drive the RS6 mod in Germany roads and the autobahn😞
4 years of work probably
😭
good luck doing that
Ok 1km big? Germany copy? 💀👍
too small
I don't think Bremen, Germany would be small either.
To big and too small?
What size is optimal or what is the limit for too big?
10sq kms is good probably
How big is Johnson valley? Or desert expanse?
id say
big
by the way we can just put German heighmap to BeamNG 🤣
Or just the 1:1 copy of the state with the autobahn? Is that too big?
Whats that XD
wdym “state with the autobahn”
Yes, and use MSFS2020's assets for realistic buildings 🧌
msfs 2020 map in beam when
Exactly it is possible
no its not
When I get my job I will pay you all 1K each probably
No it isn't
💀
LMFAO
Ok
oh yeah? then gimme
we will take % from your late paying
i need to feed my family
You gotta give some money before we start the project
neo is gonna be the sponsor
1k for a 1:1 map of something seems a tad low
I turned 16 1 month ago, I gotta look for a good job first💀
exactly
Just spawn in flat pure grid (It got stolen)
LMAO
1k for a single vehicle would be low
Then there's no way we doing the map yet
We will take more money for whole german:
- 76 burned PC's
- 158 workers team
- 2 - 3 years of work
- many assets and esc
so bill is:
20 000 000 - 30 000 000$
Listen. You said it’s impossible, what would be your price to make a copy of Germany just scale it down by 65%
I’m looking for 100 by 100km size map
Theoretically what would be your price?
Seriously.
10k€ at least
more
Deal.
3$ /j
Not much
Case: Be quiet PURE BASE 500FX
CPU Intel I7 12700F 12th gen
GPU ZOTAC GAMING RTX 3080
Motherboard Z690 AUROS ELITE AXDDR4
Memory VENGEANCE RGB PRO 3600Mhz 64GB total
Storage Samsung SS980 1TB & Samsung Solid State Drive
Water cooler PURE LOOP 2FX
Not my $4200 PC😭
💀
For something that's 1/32nd the size of the in-game Italy map...
three fiddy.
you serious?
this is not how it work
1 10k is REALLY big price
2 it will cost MUCH more
It will not survive this like map
😐
56K each
Bro gonna get a mortgage for a single beam map
you have such money lol?
you'll need to get REALLY good work for this
No way you're getting that much money, let alone paying it to someone for a single beam map
It’s called electrician 👍
Genious
/sarcasm
LMFAO
Its better to crash into a road barrier at 356Kph in the game than in In Real Life😂👍
Or use ETS2's map but upscaled
And I said 20-40% the size of Germany
Im looking for 100-200km not 4200km
But yes let’s do it
You all will be 56K richer💀👍
in what, 10 years? there ain't no way you'd have multiples of 56k to waste anytime soon. remember that life has a cost.
You gotta pay ahead before anyone starts doing any mod
I have no life👍
What you have is no brain or idea of how life works 💀
you will when you're working. life ain't free
lmao 20 - 40% of 4200 is ~1260 km
the latter
I’m paying 56K for a f||~~||ing map, you think I have a life?💀
Apparently 5K wasn’t enough 😂
you're not paying 56k for a map though, you're just saying you will based on zero life knowledge
Mean🤧
Not mean, realistic
the difference between paying for something someone made and released vs commissioning work for yourself
What would be your price to make a map. I’ll wait considering everyone is saying I’m paying too much.
exactly, he don't know what is 57K for ~3 - 4 people
⏱️
💀
child, forget about it.
Y'all gotta go outside and breathe some fresh air and enjoy some sun eventually fr
1 No one do this
2 You'll not have so many money in 16 - 18 yo
3 This is literally near to impossible in game
Answer my question, you said I’m insane for giving 50K and I will need a good job etc etc, so what is the price?
Don’t back down now.😐
This is all theoretical as i mentioned above.
It'll cost you no money because no one will do it
You don't even have a job, you ain't paying nothing for a map
the price is: you're never going to be able to afford it unless you are somehow able to have a well paying job and absolutely zero living costs. which is literally impossible
You shut up and go back to the basement doing mods Charles 😡
Yes sir
he's gone
Bro got hit by reality
like, 2K in month is really good payment in many countries
2- depending of his foamily, he can have this money xD
Meanwhile he looking at us with brick of gold on his table 😂
i deleted my engine on accident
what about porting Oahu from Tdu1
the only problem is very low poly roads but still they arent that low poly to not be fun
i think end to end the island is about 70 km
when TDUSC releases, we need a port
I can’t tell if this is satire
It's not, they really are that clueless
imagine actually spending 50k to get scammed later on
imagine spending 50k on a map💀
Someone actually paid for a commission to make a Mini Cooper mod but the mod maker never finished it
I haven’t paid and won’t.
but you wanted😂
Yep apparently it’s too much money and it’s impossible
So forget it🤷♂️
at that point you might as well just play ets2
Or get an actual car and drive it irl
What if he can’t
then buy years or whatever /j
oh yeah ask Jesus to purchase years
You can pay a lot of underage driving fines with 150k
yeah
he has a good deal i heard
15 years for 3 million
True
Whats the difference between hitting a lamppost at 300kph In Real Life vs a game?
You cant respawn In Real Life🫢😮
There is no crash physics or the RS6 mod @Marcel#3300 is making
an accurate representation of european maps:
Modding discussion brainrot
it was a scam or did he get a refund lol
or was he just incompetent and promised up his sleeve.
Does everyone just hate me or love just scoffing laughing at me?💀
me not me
✅ ❌
I actually tried it but collision said goodbye
I’m competent because I asked something theoretical and asked for a price?
no i meant the guy who took on the commission
the modder himself
it was an actual commision
sad
it is
chester journeyman wtf is this
And this is why you should just learn to mod if you want something
What im sayin
Are there any mods that add a minimalist forced induction, fuel, drivetrain, etc.. that looks like this?
Why are car windows like that?
bad mod
“The Bluetooth device could not pair”
You got it from modland didn’t you?💀
any dynostand mods?
Links to etk textures which were redone in the revamp making them no longer fit the mesh/uv map
Poor future-proofing work by the modder, should have linked to a copy of those textures instead
Zeit, I have a question, could you help me?
Is there any way to control a material's emission values with a lua script? Only way I can figure out is with two different glowmaps but it doesn't really fade as I'd like it to do
my ebastion does it
https://www.beamng.com/resources/bruckell-ebastion.20923/
You mind if I reverse engineer it a bit? I want to make a material fade in and I can't figure it out
sure
Thanks
can yall recomend some mods?
you didnt pay the bmw glass subscription
Welp, I can't figure it out, guess no fade 💀
Yo somebody needs to make an actual Q-siren mod, that would be sick.
i gotta question for you, how did you start modding and what helped you learn
im trying to learn how to mod but idk where to even start
lots of people want lots of things. Best thing you can do is to try and learn how to make the mod
very good timing
i started off by changing values and seeing if something breaks or does nothing i can see then from there i just started experimenting with well now ik what that does what does this other value do
sure if you get stumped on something you can ask but you really need to give it a good go in terms of trying to learn on your own
thanks for the advice
pretty sure ive said this more than once but love your fd bastion suspension mod lmao
could be the case of trying to jbeam a box. legit the default blender cube so add some nodes and beams and see what each value does
this will teach you the basics of materials and getting your own models into game and basic jbeaming
something like that is very easy to do i just copied the front suspension jbeam renamed the nessasary parts so it doesnt overwrite default and moved 2 nodes and removed some beams and changed the factor of the hydros for the steering. thats it
granted if you want to make it more polished you would want to re-add the beams back in and set up the limiters properly but back then i was still learning on how things worked
you being helluva help rn thank you
i literally just installed blender maybe 2 days ago and ive been just trying to figure out how to model stuff and put it ingame
Started with add on for other cars and then made my own cars
huh, I thought I totally lost membership and I'm gonna get ignored until I release something 
thank you for responding lol
help what can i do to this car to make it stop wheelieing and flipping over every time i try to turn/drift at speed
better picture of it
how do i mod the mesh to add a front wing then?
Make dampers more firm maybe
and a bigger rear wing
@static ocean
wouldnt that make the turning at speed thing worse tho?
Hmmm not sure
this is me trying to handle it
like how could i mess with the mesh to increase downforce
what map is that?
johnson valley
oh thanks
Check pins
None
Are there any Audi Q8 mods? I would really like to get one for my dad.
I think he'd appreciate it since he has one.
Not the quality ones.
Yeah I got the one. It's alright maybe someone will make a quality one in the future.
Bolide speedster?
👀
That’s intriguing.
Can someone make that thing real in beamNG ? 🤣
https://www.youtube.com/watch?v=RhdEkOqhszU
sorry beambot for stealing your idea, lol.
EDIT:
okay @BeamBot, even though i uploaded it, it's still your idea, i'm sorry for that, and if you want, i can delete it, so you will be able to upload your original work. Thanks for reading.
ayo where ghostintheleague at
@quick pollen it's only a skin for the genesis f2 ?
Yes
But someone on forum is updating it this is why I made this skin
And because I’m bored
oh nice 😉
only the skin right ?
oh yes so you will be able to do it xD
fully understand, and make the 2023 version is probably hard with this current version
I don't know at all, so maybe it's just that yes
Hey everyone. Is there someone online who could send me the Stock Bolide.zip file from the game directory? I cant access it right now because im at work
Thank you so much
(Love how you completely ignored my dms)
Can't wait for somebody to bring the pontiac firebird into Beamng drive!
I want to see a monster truck DeLorean, evo lancer(2009, or higher), and a dodge challenger(1970 or up to 2018)
Yeah i want to see 69 Charger in Beamng Drive!
does this scream upscale?
Are you an AI
Where did that Frank the Combine harvester came from?
(Not gonna download it.)
No i'm not an AI
🤨
does anyone know any other websites where you can get mods from other than modland and worldofmods (world of mods doesnt work for me idk why)
beamng forums

this is the 100th time the word "Avior" is mentioned in this server along with my first message

Using such thirdparty sites is dangerous - and NOT recommended

kinda funny how finn said it the 99th time
i must now depart
goodbye for an unknown amount of time beamcord

Does anyone know if there are any first gen toyota 4runner/ hilux mods?
can someone recommend any track mods?
would be cool to have nurburgring
but any good track
https://www.mediafire.com/file/vwa2gz5kjv6ak8c/ks_nord_v20230416.zip/file
NEW UPDATE 2023-04-16: Black stripes in grass fixed
Remove any old versions of ks_nord in your mods or levels folder and clear your cache before installing. Place the .zip file in your mods folder to install. Ultra lighting is recommended if you can run it.
Changelog:
2...
https://www.mediafire.com/file/1z4vwst8io5fwrm/ks_spa_v20210802pbr.zip/file
An update for ks_spa, with new PBR materials, lighting, and some collision fixes. As usual, remove the old version and clear your cache. Install by placing the .zip file in your mods folder.
Changelog:
2021-08-02:
- New PBR materials for prominent objects
- Track now fac...
https://www.mediafire.com/file/7vvcgxgtlqejqah/ks_imola_v20220225.zip/file
*Updated 2022-02-25
Released earlier than I thought I'd be able to. Enjoy!
Includes AI paths and a Time Trial. Let me know if you find any spots that puncture tires - I was not able to find any.
Changelog:
2022-02-25
- Fixed many collision issues that caused tire punctu...
downloads in description
Thank you ❤️
Gave +1 Reputation to @wicked egret
@wild raft HMMMMMMMMMMMMMMM
Old (Focus) version has been binned
can you make the same forum for the new version then
If you’re gonna make a mod that replaces the unibody/body with a modified one, make sure you can actually use it and that it doesn’t cause this issue, BEFORE releasing it
No, the Focus is scrapped, discontinued. It‘s too far away from really carrying it‘s name (dimensions, details in terms of the looks)
anyways, damn.
i thought it was a focus NA2, its a mix of taurus AND a NA2
how come you made it so detailed tho?
What mod is that,
Why not?
beamng modding takes 3 days or a week of your life to make a detailed mod right?
lmaooo more like 5-7 months
No?????
or more💀
years, decades
Making the Vertex the way it is it took 2 years
depends on how detailed, can even be 2+ years
1500+ hours
this is not assetto corsa modding lmao
That is initial development of the automation derived version and the rework with all updates
you cant just rip a model and texture it slap some premade physics and call it a good mod
Pretty sure it’s like etk k series carbon parts mod
How old is it
meshslaps prob take 19 seconds of your lives, there is no detailed meshslapping, well depends on the quality of the meshslap
a good meshlap would still take a long time lol
Now** that** is dedication
if we count loading up steam and blender then downloading the mesh, then slapping it, prob it will make like 3 hours?
This took a bit over a month at this point
will it also have crazy configs?
you have to still edit the jbeam to be accurate and fit the car
is it PAID?
-_-
i hope not
0€
thats expensive af
why not? It's always fun to have crazy configs
Depends on your definition of crazy

vertex crazy
a derby crazy
meh i like realism a rocket booster or 2 would be cool but apart from that
Without checking since my pc is off, under 2 years okd
Saleen Airlines
you can call realistic a rolling blade fitted with a jet engine pocket edition, cuz its real
Nope
The K series just got remastered, probably broke it.
Goddamnit
It‘ll have racing stuff, hillclimb stuff
It‘ll probably get a Deo Volente spec
Maybe a rally version? Because why not
Saleen Airlines?
Not the modder's fault, 0.28 broke my Spitfire and I've been too busy with life and other projects to fix it till now
The “remaster” finally gave me interest in the car and now cool mods don’t work for it
Spitfire still works tho? I use it as my default
Spitfire, like the truck?
Nope
:(
Or are you confusing it with the Firehawk because it has a plane engine
what r u gonna call it then if its a lore free mod
still very cool mod anyways
...or a forum mod
Yeah. The short body d series with the bed/cab divider
Firehawk has been broken forever lol
Wait really? It broke for mort people
Either way i gave it opening door support now so
reverse drag if thats crazy?
Well I do also have a bobbed bed dseries that’s the exact same size so maybe it’s that that still works. Idk. I’ll check later
There will be a drag config, two in fact
one of them a recreation of a real car :p
o.O
America
i saw it
What?
what engine is it gonna use if planned? V8, V10, V12?
Well, the one that the real one has
is it based off the Saleen S7
i'm being f*cked with
doooo iiiittttt
n o
So i don’t do anything 🙂
help =/= do by helpers
😔
it's easy to do such addon
easier than your cube
@unreal chasm Help me to take another big F1 fan to big BeamNG moding 🤣
I lost it
if he doesn't have the time, it's useless to try
It‘s gonna be a full replica of it btw
so only 2 months to learn how blender work, and how jbeam work, is pretty short :/
True
But
learn the jbeam for a spoiler in 2 months it's really possible, but with blender you will need 1-2 months more
We can help, Emomilol is pro in blender, I can help with jbeam
so I think 2 months enough for at least start 🤔
it reminds me my first spoiler - 3 peaces of cube 😂
have help is a good thing, but after you need to understand that help and be able to don't need that help in the future :/
true
I will not talk about that xD
Thats why I make only skin 🙂
And I’m slow at making them (already 2 days for alpine F2)
you are not slow, you are taking your time, and it's a good thing too
and month for 8K McLaren mp 4/6
but it looks amazing
get real
fondmetal
lol
what is your progress about it ?
No suspension
well, mostly everything done, but idk how to do suspension at all
But it's way better than betta version
Still no rear brakes
lol, I forgot about this
This car is wip, sound also
don't judge me, I'm not simracer lol
Also, don't take it seriously, this is just game
#beamng #beamngdrive
Last vid I did with it
oh and you can ask in the modding for dummy discord some help ?
Like, I understand HOW to do it, but every time I do it, it bad
may be I just need to put here more time
oh so you will find the good one one day
I hope lol
My early idea is to make this fast boi in Blender, so I can try putting this into BeamNG.
I'm choosing this, because it's on wheels. Caterpillars wouldn't make sense.
Who know how to do textures from 3d model?
Like gauges or lights textures
how would i go about tuning a car for rally?
i want to make a rally version of the esbr 800 but im not sure how to tune it
ive raised it but it wont go high enough, ive widened the track but it wont go wide enough and i also dont have the suspension tuned to really do rally
i need very very very strong tires and wheels
you could go into the game files and artificially increase the wheel's strength. look for a tutorial to find how to do that maybe?
I have never found any tutorials
idk then im looking for one as well so i can mess with my suspension for a rally car 💀
None
Modland is safe?
pretty safe, but low quality and not recommended to use
what site is good for downloading mods?