dense gull
Hi I have ordered this ESP32-S3 and I do not see the "port" option in the device manager. The ESP32 came a tiny tiny bit dented at the COM port that I was able to put in the cable after a little time. Is there a driver I needed to install or is the shipping damage it? I cant tell which version is this
https://www.amazon.com/dp/B0BVVGNBB3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
this is the board I got based on the automation website
ive also installed both uaarts drivers
also to add some color about the dented COM port, this is how much I can put the cable in
com port is the left
analog narwhal
also to add some color about the dented COM port, this is how much I can put the...
Looking at it it seems com port is not gonna work cus the cable wont fit
clear perch
I would return it and get a replacement. With how small the ports are there's a solid chance you'd break it (assuming the solder/port isn't broken already) if you were to try to correct the dent. From the picture it definitely doesn't look like the cable is going in deep enough.
Kind of how I received one of mine (with pins) a while back.
dense gull
thank you