#Corsair RGB Gaming Build

31 messages · Page 1 of 1 (latest)

raven smeltBOT
#
j74kennedy has been warned

Reason: Posted a link

lyric sigil
tidal sundial
#

looking at the cooler though, I am a little concerned it won't fit on top, so will need to be on the front, leaving not enough room for all 4 link fans to be added

summer bolt
#

sorry for posting the links. on the corsair website they have the 4000d case with a picture of 3 RGB at front, 2 cooler RGB on top and one RGB at the back. This is what I'm trying to achieve

hoary steppe
#

No need to apologise for posting PCS links
It is just that you cannot send any links here yet until you level up a bit more

tidal sundial
#

drop down to the h100 link cooler to be sure, that should fit, the H115 us a 280mm AIO

spring garden
summer bolt
#

ok thanks. will that enough to cool an overclocked i5 14600K?

tidal sundial
#

the CPU won't be overclocked out of the box,

overclcoking the CPU voids the PCS warranty, and it's not like overclocking will benefit you much. CPUs built in boost functions already ush the CPU to it's safe limits

#

the cooler should be just fine for the CPU in question though

summer bolt
#

ok got it. is the i5 14600K a better option than a ryzen build with the ryzen 7 7800x3d chip, or is the ryzen really a competitor to the i7 14700K?

tidal sundial
#

depends on use, for gaming the 7800X3D is best by far

#

also, it's not as hot as some of the 14th gen intel chips are

#

if you however need the extra cores the intel chips offer, then intel is the better CPU. but it it's pretty much just gaming, discord, and some light streaming, the 7800X3D is definitely better

summer bolt
#

I'm trying to add compatible QX fans to this build but the validator is saying that I have too many fans. I'm hoping that the CPU coolder can be mounted on top of case as case seems to support this and then add the 4 RGB fans, 3 at front and one at rear? Also I don't see an option to get either iCue link CPU cooler or fans without hub, so I'll end up with a redundant hub?

This is what I have so far. I was trying to add 4 X CORSAIR ICUE LINK QX120 RGB KIT

Case
CORSAIR 4000D AIRFLOW TEMPERED GLASS GAMING CASE
Processor (CPU)
AMD Ryzen 7 7800X3D Eight Core CPU (4.2GHz-5.0GHz/104MB w/3D V-CACHE/AM5)
Motherboard
ASUS® TUF GAMING B650-PLUS WIFI (AM5, DDR5, PCIe 4.0, Wi-Fi 6)
Memory (RAM)
32GB Corsair VENGEANCE RGB DDR5 5600MHz (2 x 16GB)
Graphics Card
12GB NVIDIA GEFORCE RTX 4070 SUPER - HDMI, DP, LHR
1st M.2 SSD Drive
512GB SOLIDIGM P44 PRO GEN 4 M.2 NVMe PCIe SSD (up to 7000MB/sR, 4700MB/sW)
2nd M.2 SSD Drive
1TB SOLIDIGM P41+ GEN 4 M.2 NVMe PCIe SSD (up to 4125MB/sR, 2950MB/sW)
Power Supply
CORSAIR 650W RM SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET
Get a discount code for 20% off select peripherals at Corsair.com
Power Cable
1 x 1.5 Metre UK Power Cable (Kettle Lead)
Processor Cooling
CORSAIR ICUE LINK H100i RGB HIGH PERFORMANCE CPU COOLER

tidal sundial
#

ah right, this happens because of the 2 fans already in there, they will need to do a manual override, you'll need to email, or call PCS asking them to add the 4 link fans, they can then charge you as needed, they'll be able to sort you out

#

sorry to ping you @spring garden did I miss anything?

tidal sundial
#

as to the extra hub, who knows, you might want to add more than a single hub can handle later, so I'd roll with it

spring garden
tidal sundial
spring garden
#

Ok, in which case yeah.. best to order without the extra fans then contact support to add the 4 in and override the warning.

tidal sundial
#

cool, I might not need to pester you to confirm the next time this happens

summer bolt
#

Hello, this is what I'm settling on, what do you think? Is there anything obvious you'd change? I have some spare SSD's lying around so would plan to put those into case myself.

Plan would be to also get 4 X CORSAIR ICUE LINK QX120 RGB KIT and don't use the 2 fans that come with case. (3 in front and 1 in the back) - all linked to the CPU cooler with the iLink
Do the Braided Power Supply Cables (with the RMx power supply) make much of a difference? Would this also include cable for the GPU?
The cooler I have selected, that will definitely fit in top mounted? I would have preferred the H115i, but I had doubts that fitting in top, due to RAM obstruction

Thanks!

Case
CORSAIR 4000D AIRFLOW TEMPERED GLASS GAMING CASE
Promotional Item
Get a discount code for 20% off select peripherals at Corsair.com
Processor (CPU)
AMD Ryzen 7 7800X3D Eight Core CPU (4.2GHz-5.0GHz/104MB w/3D V-CACHE/AM5)
Motherboard
ASUS® TUF GAMING B650-PLUS WIFI (AM5, DDR5, PCIe 4.0, Wi-Fi 6)
Memory (RAM)
32GB Corsair VENGEANCE RGB DDR5 6000MHz (2 x 16GB)
Graphics Card
12GB NVIDIA GEFORCE RTX 4070 SUPER - HDMI, DP, LHR
1st M.2 SSD Drive
512GB SOLIDIGM P44 PRO GEN 4 M.2 NVMe PCIe SSD (up to 7000MB/sR, 4700MB/sW)
2nd M.2 SSD Drive
NONE
DVD/BLU-RAY Drive
NOT REQUIRED
Power Supply
CORSAIR 650W RM SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET
Power Cable
1 x 1.5 Metre UK Power Cable (Kettle Lead)
Processor Cooling
CORSAIR ICUE LINK H100i RGB HIGH PERFORMANCE CPU COOLER

tidal sundial
#

sorry for the slow reply.

regarding the braided cables, they are a cosmetic extension, so they don't do anything but make it look better(if it's your cuppa)

as for the cooler, I can't guarantee that it 100% will be on top, but it realistically should. It can however be a pain when it comes to changing RAM out in the future, as the fan likely needs to be removed first, but thats a bridge you can burn when you get there. If you want to maximize your change of the AIO being on top, go for the non-RGB RAM, as it's a lower profile

summer bolt
#

thanks, your right about the ram height, 35mm as opposed to 44mm, https://help.corsair.com/hc/en-us/articles/4412253644045-DDR5-memory-module-dimensions

Just a general question in relation to the components used to build the PC. Do you provide any accessories included with the components (e.g. for the cooler, the bracket for intel CPU), all unused parts for the PC case, etc.

tidal sundial
#

any unused parts that came from the components used will be included in the welcome box, so you're bound to get a rake of cables, screws, probably some stickers, a few booklets, and other odds and ends

#

in my case I got zip ties, stand off screws, for both motherboard and m.2's, some thermal paste, mounting bracket for what I assume is intel, sata cables, molex power cables, CPU power cable, 8 pin PCIe power cable, and a ziplock baggie of the used cable ties 😂

#

MoBo user manual too

summer bolt
#

what is your current stock of 4070 super Palit/Zotac branded cards? Are they the 2 or 3 fan design?