I’m not familiar with that hilt but that seems not right
#(Solved) Shadowfoil Props „Youngling Slayer“ Inner Body-Wobble (Korbanth Install)
rancid crown
edgy thunder
Yeah right? The entire button section is slightly moving xD. Didn’t expect that from a 700 bucks lightsaber. At the moment I feel more comfortable spinning my old black series graflex lol
rocky pewter
Hm. Definitely something not tightened fully, but I'm not sure what. Pinging @woeful sundial maybe he can help!
edgy thunder
I bought it from Korbanth not from Shadowfoil. Don’t know whether he would be up to help me yk.
Shadowfoil Props „Youngling Slayer“ Inner Body-Wobble (Korbanth Install)
inner scarab
This happens to mine too, which is something I don't like compared to the Aniflex Elite. Same issue with the Aniflex V2 - Wobbly Emitter due to the Retention Screw being the flathead above the glasseye
Best fix I've found is to just make sure the pommel cap is pressing against the chassis as tight as possible to prevent wobbling
woeful sundial
Looking over the assembly now to see if there's something in particular that might be able to be tightened.
edgy thunder
This happens to mine too, which is something I don't like compared to the Anifle...
Okay thanks a lot! Makes me feel quite a lot better knowing I’m not alone with that. Appreciate it :)!
woeful sundial
Ok yeah looking it over, the side to side wobble could be because the countersunk screw above the glass eye can't be fully tightened with a blade in it. It's also possible some of the screws that hold the emitter shroud and inner body together under the clamp section came slightly loose. One sec will send assembly drawings
These screws hold the outer chrome and inner black pieces together
edgy thunder
I see. Thanks! If that’s just how it is, it’s fine I guess!
woeful sundial
These are under the clamp, but be warned removing the clamp you need to be careful not to let it hit the other parts and scratch the chrome like @inner scarab did
edgy thunder
These are under the clamp, but be warned removing the clamp you need to be caref...
Yeah I saw his video 🥲😅. Thanks a lot man! Appreciate it!
inner scarab
🙃
woeful sundial
I know not an ideal answer or really solution for you but that's what I could gather from looking at the assembly.
rocky pewter
These are under the clamp, but be warned removing the clamp you need to be caref...
Ooooof
edgy thunder
Don’t worry it’s totally fine. Maybe that’s just how things are. Thanks!!
@woeful sundial it actually worked! what a legend! Tightened the screws unter the clamp bit by bit and now the body is „locked in“ 🗿 ❤️
God damn. Makes the hilt feel so much better
(Solved) Shadowfoil Props „Youngling Slayer“ Inner Body-Wobble (Korbanth Install)
woeful sundial
Awesome! Glad to hear it