ECU, battery displayed vs suspected actual power I/O differ

[velvet forum]

======BUG REPORT TEMPLATE======

Bug name: ECU/battery displayed vs suspected actual power I/O differ
Priority: Low
Description: See below
Reproduction steps: See Below
PC specification: Acer Nitro AN517-41 w/ NVIDIA RTX 3060

See attached power setup. The battery display shows 15 kw in. When the output is set to 30 kw out, the battery still shows charge increasing with the workshop drawing power-- which makes me think the display is not accurate. The ECUs all show 15kw out, despite the middle one should be displaying 30kw output. When I set the battery output to 30 kw, it's able to successfully power the workshop with a single CO2 scrubber and 2 airlock hatches. All the ECUs are set to what I believe should bet the correct power allocation given the sockets being used.

[woven wagon]

Can you upload a screenshot of the control panel from that ECU in the middle of your diagram? Or, better yet, a save file so i can check it out myself?

[velvet forum]

Here you go

[woven wagon]

Found the problem. This is the top ECU from your diagram. You got the output connected to the wrong socket, so it's not actually outputting anything to the other ECU.

You set it to output 100 % on outlet 1, but the output cable is hooked up to outlet 4

[velvet forum]

Derp... I could've sworn I had it wired correctly. Thanks for the help.

[woven wagon]

No problem.

[velvet forum]

Is it intentional that you can't recharge the suit from an ECU outlet port, even if the port power is turned up?