#Panasonic 3DO
1 messages · Page 15 of 1
nope, doesn't boot at all, even on fresh reset
I feel like we need to pin a message in here about this:
Different games are going to boot for different people (and different systems) right now. If you want to help, and you have multiple misters, SRG is looking for a throughline as to why things are booting on some stacks, and not others. If you have a stack that doesn’t boot a game, and a stack that does book a game, you can help by swapping the ram between the two stacks and seeing if the results are the same.
I don’t want to discourage people, but saying something boots on your end when it’s not booting for someone else is not helpful at this stage. It will be helpful at some point, but right now the focus is on stability across systems.
I love you all and thank you for helping SRG test, but we should try to keep the noise down, so when he looks at the channel, he can see keep track of what is happening
this old chestnut lol
what core did we do it for last...N64? or Saturn?
Understood. No problems. 🙏
SEGA Saturn. For months people were experiencing RAM lottery, with some people getting better results over others.
@crisp zealot using the exact same mister stack, I have a stick that boots microcosm and one that does not. Here are the shots. The first stick (with 3624 on the bottom left) boots microcosm. The second stick (0225) does not. Let me know if you need anything else.
Better shot of the chips. This one boots:
This one does not:
If I understand well the request from srg320, can you try to swap the SDRAM don't work to another MiSTer system and check if the game does the same ?
yup, one moment
I will be back at home in the next hour, Just following some messages here and there.
I'm having a problem with the Microcosm with SDRAM 2.9 using standard memory chips (Alliance)
Hangs with small gfx corruption on 3do logo
Ok, tested on a stack that was booting microcosm fine. Swapped out the ram stick with the no-boot one and now it's not booting on this stack either.
One stack is a mister pi, one is a de10
working and non working ram on both were RR ram
Ram lottery 
aint no party like a ram lottery party
Swapped the ram back to the working ram that was in it before, and microcosm boots again
Touché, thanks for the test.
I recorded some of the original bugs in the games from the original 3DO. https://youtu.be/d1Hzel3uzLo Some of them are noted in the test spreadsheet as issues.
Dragon's Lair, Aqua World, Chiki Chiki Machine Mou Race 2, Blade Force, BrainDead 13 Starring Fritz, Samurai Shodown, Quarantine
In this regard, the 3DO is on par with the Saturn.
This is the rabbit hole haha
But I can’t chat here anymore. I’ve been informed I don’t actually like 3DO 🤣
You got burned by someone who collects biscuits...
Damn Brits
yeah i thought we all came together and denounced the 3DO and decreed that it is impossible for anyone to like it at the gamer council
i know that oldgamerUK was there but i dont recall seeing biscuit collector there
we might have overlapped with the biscuit conference
Only for some time.
I'm happy for you...
Looks like it
The real lottery win is if you can run Nishimura Kyoutarou Travel Mystery
Please wait until further notice for reporting issues or your tests results.
Thanks.
I don't want to buy a new ram for my MiSTer because the answer is simple: Only this core cause problem at now for some games. I hope there is a solution.
We have enough data so far and once again thanks to everyone who shared their results since yesterday.
Alright, this is my winning ticket for Microcosm
Will try
of all the games I tried yet only Out of this World didn't boot past the title screen, but Another World did
I should post a 3DO video on my silly little channel and see if I get the same! I've been a fake fan for 33 years!
This is the real lottery
You are the only winner
and I am jealous

For what its worth, the Dolby Surround seems to work fine on FIFA and 3DO Sampler. Not had chance to actually play with it much yet.
dang, blue screen on Nishimura Kyotarou Travel Mystery
I stand alone
it truly is a travel mystery
hola
Sup
Sorry for the trivial question, but the link for the core for the
Version with single ram where is it?
It's burried in the thread. Not formally posted due to some testing issues with ram lottery.
Thank you very much🤩
We are working on it right now, some games could fail to load depending on RAM lottery.
I don't see "Load from CD" in the menu when loading the core, what would cause that?
Do you have the latest unstable MiSTer Main file ?
^looks like that. Yes, grabbed the latest unstable MiSTer from the nightlies
Wasn't load from cd option removed after the first release?
this is the latest - not in nightlies yet or pinned
#1329170138234097745 message
Yes, I grabbed the latest 3DO core and nightly MiSTer file
ah - then yeah, the load from CD was removed from the latest. Just pick via the Insert Disk menu item
ah okay. that makes sense then. Now to tackle why it says cd bios missing when its there. Issue with NAS loading instead of local on sd?
yeah - make sure the /games/3DO folder on your NAS has the bios files
might be why. right now they are all on sd and games on NAS, no issues with others, but makes sense for WIP for now. will shift it over and test.
Also it should be "disc", not "disk".
Literally unplayable garbage.
We know.
Tomato tomahto
Yup, had to move boot.rom to NAS. Everything working now
wolf 3d and doom really benefit from that strafing on the shoulder buttons, makes trying to play them on other game pad layouts feel like crap (i was messing about with the dos and jaguar versions earlier today)
wonder if somehow this distortion can be improved on with time
-# also what the hell, this is a fun version of Rebel Assault I can actually enjoy??
The Doom game on 3DO is a failure; the framerate is terrible on real 3DO, and playing in a small window is absurd. 3DO can do better than that. Only the music tracks are fantastic ! Otherwise, you're better off playing it on the AO486 core for example.
well yes but it's still cool
But Becky Burger did what she could in a short amount of time....For save the 3DO version.
this is mostly Randy's fault
Single RAM user here. This 3DO core is honestly pretty amazing already. I was playing some Star Control II earlier today and it brought back alot of great memories. No issues so far during my playthrough.
it’s in incredible shape.
horrifying
i will throw my second ram stick in the bin then
Let us know if it freezes after level 3 when it saves
curious if anyone else is having CRT issues or if it's just me? works perfectly over HDMI. i'm doing composite out on my end so maybe that specifically isn't supported yet?
it runs on my CRT but kinda does a wacky vertical looping motion situation.
Will do when I hop back on in a bit here
Mine booted right up just fine. I use RGB for my connection. Sounds like you got a sync issue of sorts for sure based on what you're describing
What kind of inputs are you using for your CRT connection?
Edit: I see you mentioned composite now
Maybe a blurp you need to add in INI for composite video?
I'm assuming you probably have to define how it syncs
Could also have to with frequency
Some CRTs are much fussier about handling anything less than 60 HZ
@iron sigil are you running the latest unstable core and the lastest mister unstable?
Single RAM user, this time i've been very lucky, every game i've tested worked, also the problematic ones in this thread. The Mister Is a genuine DE10nano with a v2.4 sdram. Only some PAL games does not boot complaining it's and NTSC system, i guess at some point will be and option for the core.
i'm not! i was told that was only nessecary for saves. but i got the same issue with that setup when i ran it earlier. (i downloaded the unstable nightly, renamed it, and had the mister.ini point at it for that core.)
So many people with composite stuff recently.
And it’s the core from yesterday that you’re running?
20260407
v2.4 ! And you have zero issues(on all cores) with version of sdram ?
Give SRG time to cook.
I mean to be fair, this core already plays the games better than an actual 3DO can, even on single ram 😂🤷 my cousin left his at my house for a little while and we had a fun little weekend where we deep dived on it. The actual hardware is so clunky
I swear one of these days I'm going to make it past stage 2 on Gex. I always just get to stage 2 and die a bunch falling in the acid, then stop playing it forever
Excited to see it progress though! This is awesome so far
What games "run better"
correcto!
I will test composite at some point tomorrow
composite looks fine for me (analog IO v9.2 board and MA YC adapter)
even without a yc.txt timing yet
@iron sigil I just noticed you said it happens in the OSD too. can you share your mister.ini? And let's move to #help
you got it!
I was exaggerating a bit. I'm mostly referring to how clunky the disc drives can be when playing a real 3dO so by default this is really smooth and fast so far. Gex was running quite well for me. I dropped into few other games but like most 3dO's lineup it can be hard to keep your attention unless there's something you have a hankering for
I enjoy some of those consoles just for the archival sake and fun to see where they were trying to take games at the time
One of these days though, I intend to finish Gex
Great work! Stupid question, but if I don't want to run the update-all script, where can I download the single ram 3DO core by itself? Is there a github?
should be in the pins
Dual was under the pins, but I didn't see single. I found your post on the forum though, so I think I am good.
Thanks!
oh ok, sorry, @marble jetty is asleep at the wheel
Have you been able to compare the two? It would be cool to learn first hand.
This is a really interesting perspective. ty.
If only there was another mod around that could update the pins 
they're very territorial
I can’t edit his messages (otherwise I would)
Mods cannot police other mods. We are all judges
Is the 3DO core in a repo yet then?
Yes but there are no compiled rbfs in it
The WIP DB repo has the core rbfs though https://github.com/ajgowans/wip/tree/main/_Unstable
Getting a NVRAM error trying to play Need for Speed, but I see it listed as having issues, so I assume that is expected currently?
Single ram core
I got a lot of catching up to do
I’m too busy firing grenade launchers and submachine guns
which isn’t a joke, that’s what I’ve honestly been doing lol
Hope you've been firing grenade launchers and submachine guns at Raspberry Pis 
Like software on PS1 and Saturn, 3do games also tend to stream assets. If you're experiencing a game running "better" (need for speed, doom, killing time, etc...) these games are heavy cdrom usage. A dogged out 3do is going to have streaming issue with some games. I have an older launch PS1 from Japan and a US PS1, both have issues on games that are heavy on asset streaming. Audio pops, games freeze frame waiting on an asset, etc.. so if a game that isn't heavy on streaming is running better, that's a core inaccuracy and don't be surprised if that game gets worse as the core gets dialed in
I don't have a mister. But I've been peaking in on videos people post on YouTube. Mk2 having slowdown is not normal. I won't make comments on many other games until the graphical glitches started to get weeded out
This is a mister server
Yes
I recommend mister
I join servers where I am linked where 3do talk is frequent
I've been eyeing the superstation, but haven't pulled a trigger and didn't want to give it much thought until the 3do core hit its single stick update
Do you only play 3do
Besides, trapexit just got a super station and bacon is a big 3do person. If it was just me, id be more on top of things
Can I answer honestly lol
How do you know if 3do is great when you can't compare it to something worse like jaguar
I played every other system my entire life. Shit got boring after 20+ years. 3do was the green goblin mask calling to me
Ah gotcha. Like the Jim Carrey movie.
Yeah well, there is this thing called objective reality lol
Intuition, if you will
I will
His movies are like Adam Sandler movies. They all have this fill-in-the-blank script where they essentially play cards against humanity but with millions of dollars
Like a mad libs
Composite is slightly off right now, Sergiy is still playing with the video clock, once he doubles it from 24.5454 it should be accurate again. Gotta let him cook
Just in case the dozens of you with composite are wondering
I haven't tried composite yet on the core because i didn't think it'd be working. I really appreciate your work and mostly play consoles on composite.
i appreciate the heads up! i was just making sure i wasn't doing anything wrong on my end. i appreciate the brain trust's work and am in no rush
the lone renegade
it really is an interesting system to play around with
If Taki released a colorway of it based on the Goldstar/LG Alive II, I’d bet you change your tune 
An fz1 mini would suffice
Fz1 looks the best to me
That FPS just looks like a fake game you would see someone playing in a movie or something 🤣
it literally was just fake cgi bullshit iirc
Almost every tech demo is
Years before Sony at E3 2006 😂
"this is what we expect the games to look like"
3do showed their first playable 3d tech demo off in 92 or early 93 and got fucking hounded by some journalist over it because it was running a dev station instead of a 3do unit. Then you get shit over the cgi stuff anyway. Might as well just show the cgi shit
Here is a playable version of the 3DO M2 Dolphin Demo. The software is being run on an FZ-21S1 unit and output via S-Video into an encoder. This is a short video meant to display most of the abilities available to the user. You can see the different effects that can be applied to the dolphin character (chrome / a couple of transparancies) as wel...
M2 looked like cgi despite running on actual hardware tbh. This demo looks like some shit Nintendo would have tried to say their system could run, but it's really just being played on a cgi workstation
@covert wagon get us the demo now!!
turns out you can map 3do doom and wolf3d to a 360 pad quite nicely
still digital input but found it much more intuitive
yea M2 was legit
but I wonder how it would’ve compared to the 6th gen
Or would it be considered 5th gen like N64
it was supposed to come out in 96/97 so 5th gen i would think
I had issues with the first versions of Saturn core, before the changes in the sdram usage, like many others had. With 3do core it seems i have no issues by now.
Would have had the same issue as the Dreamcast. Outperformed the 5th gen beyond a doubt but been handicapped by the time the inevitable 6th gen rolled around
Wasn't the Dreamcast the same gen as the PS2? They had the Saturn as competitor for the PS1.
Yeah. Statement still rolls off the tongue well for the Dreamcast too though. It was clearly a leap, but it had no DVD drive.
m2 seems closer to n64 than dreamcast and ps2 (i have no authority to make this statement)
it was a huge leap compared to the saturn but the PS1 to PS2 leap was just too much and also DVD player finished it off.
sony marketing overplayed the capatabilities of the ps2 quite a bit too as far im aware
N64 shark tech demo versus M2 dolphin demo, nuff said
PS1 tech T. Rex clears both
Dc could emulate PS1. Compared to even the n64 DC is a huge leap. Internal and Display Resolution alone is enough to set a pretty high bar. GTA 3 on Dreamcast proves the hardware could keep up in some manner to the PS2. It's ultimate kill shot was the GDROM. But even so, gta3 clearly fits on a cdrom, I'm sure a GDROM version would have been fine
Please be mister server dry humor please be mister server dry humor
we do have gamecube which also has discs with not much room
200mb more plus it's Nintendo. Plus they were gonna pump out their own software regardless of who else would publish, and the system still didn't sell well. It's Nintendo though. They dropped the VB, then acted like it didn't exist lol
If my memory serves correctly, Sega documents implied they were simply out of money too.
the only ps2 games that fill entire DVDs do it almost entirely with FMV anyway
A lot of games were like that after the whole multimedia craze unfortunately
i mean, its a reasonable thing to do with the space if you have it anyway
but i expect dreamcast could of hung in there , it'd be similar to xbox360s dvds vs ps3s blurays
NFS for the 3do fills the entire disc. Once you open it, remove the FMV's and repack it, it's 340mb compared to the 670mb lol
The only thing Blu-ray on PS3 benefited from was the games that were multidisc by default. Other than that, most of them were on low capacity BD because they were ported from Xbox. Sony couldn't strong arm their way like they had with PS2.
some ps3 games have massively better fmv quality just from using BD, that was kinda it though
and often you were getting a worse running version of the game with slightly better fmv so not really a clear win
i guess ps3 games had a lot more lossless audio too
The Xbox 360 was designed to be dev friendly as far as architecture is concerned. No one wanted to take the time to learn the CELL shit
Haha yeah right
devs in 2007 were casual and frauds and couldnt HANDLE THE UNLIMITED POWER OF THE CELL PROCESSOR
they were also lazy
of course
even these days non-lazy devs can get more power out of the CELL than ps5 pro because the cell has unlimited processing power
After hearing the horror stories of workplace environments like Rockstar San Diego, I can see why some devs don't feel like dealing with advanced architecture
tbh both of those consoles could produce really impressive results in the right hands, it was a good generation
I'm assuming having separate 640×480i and 320×240p options will eventually happen?
Right now it's outputing at a weird 640×240p, which I'm guessing is just a placeholder?
I'm testing Nishimura Keitarou Travel Mystery - Akugyaku no Kisetsu since yesterday.
Interesting game.
one of the best "goes hard" cover art examples on 3DO
still number 1 for me
Is it working for you ? On my side it is blue screen after 3D0 logo
Let me try within 10 minutes, I'm finishing a game of Neo Turf Masters Scotland right now (enjoying my day-off).
look what you made me do
I'm now an influencer on the 3DO...
I didnt realize it was so cheap. I need that on display
stop looking over my shoulder
Some 3DO games seem cheap at the moment, yeah.
the random japanese stuff is always a good price so long as its in the US and you aren't buying from a Japanese seller
Jolly beardo is the only one that I have seen that has travel mystery booting on the current core. Truly they are blessed
Just be patient
Cheaper than a small pizza
regarding your comment I think it is working also on your side ^^
I almost finished the first disc late night yesterday.
I was lucky with the SS1 this time.
ok !
Ghost Hunter Series - Kurokishi no Kamen (Rev 1) works for me.
threw the single core on my misterpi superstation one, runs pretty well overall.
Does anyone have a link to the translated version?
I don't think one exists for the 3DO
Microcosm (JP) / bin+cue - playable
MD5: 465fdc3bfd701fae4f660a1a1c7c8373
Microcosm (USA) / bin+cue - freezes when displaying the "T&E Soft presents" publisher logo
MD5: f680353429def4d3c1e95120fd9c503f
(sadly there is no translation for the 3DO version)
There is an English version for Sega Saturn.
Nope, no translation.
We need a new formation/return of JunkerHQ & Artemio!
Don't need to report games that are freezing or gives a black screen at the moment.
And wait until further notice, thanks.
Honestly if we could figure out the encoding format for the text on 3DO the translation exists so it wouldn't be too heavy of a lift. Maybe @tender crystal you know?
_taps [sign](#1329170138234097745 message) _
Camny’s looking good!
Crazy how quickly single ram and analog out came about for this even if still beta
I’m getting flashbacks to the N64 frenzy
its fun to see the opposite methodology of core releases; Srg gave us Saturn when it barely did anything and we were entertained by checking for updates when more games started working. 3DO released 95% fully baked and no its in the home stretch already
He also released 32x almost finished
I have downloaded the most recent unstable main and the bios and renamed it boot.rom when I try to play wolf3d, I see the 3do logo with a red background and then it just goes black and stays there. I have tried this with the bin and cue version and the chd format. Does anyone have any idea how I can get this to work? I am using the single version
Just love how Lemmings is basically just a 2600 game that has a couple 16 bit elements and allows multiple characters on screen.
Did you added the BIOS file manually ?
There are multiple of BIOS files for the 3DO, but only one works with the core.
I ran update all and it chose it
Just getting a black screen after the 3do logo when I try to run the game
I just ran update all and let it add the bios
OKay, so not a BIOS issue.
What is the format of your game ? BIN ? ISO ? CHD ?
What type of MiSTer do you use ? Single ? Dual ? Original or clone board ?
now that ive had a chance to give it a spin i maintain the best home console port of MK2 is still the genesis version and i will die on that hill
that's correct
it could be my imagination but i think even the 32x version on mister has slowdown not present on genny
32x, specifically
there was, but I think that is fixed now
and it's a clone
oh shit
the viewport on the 3do vers is so zoomed in the sega one looks widescreen in comparison lol
not to shit all over the homebrew version or anything
I remember the nonsense about it being able to guide missiles
I have a lot of trouble measuring whether the 32x core exhibits slowdowns on MKII, but that's another topic, and we're talking about 3DO here.
i had a hell of a time mapping controls for the 3do mk2
of course sometimes mapping mk controls is hard even in the legacy kollection
What game
mk2
Oh wow!
Does that imply the 32X port is really good?
mk1 and 2 on genesis had cool matt furniss soundtracks too so for me they'll never totally be replaced
but i cant wait for the arcade cores
it's the best home port
amazing
The 3DO one gets the damage messed up. you get put into danger and can still take 2 full hits
nothing does enough damage
the cpu ai is weird
The Arcade Edition patch?
ya
The 3DO version is fun for the Easter eggs but if I really want to play MK2 it’s the 32x version.
the 32x had more good games on it than the 3do 😟
Thank you for all this information, unfortunately I can only advise you to wait until the next core version and you will have the possibility to try Wolf3D once again.
Sorry for the wait, but the core is still in WIP version (that's why it's not in the MiSTer-devel branch either) and it is necessary to adapt the core code and carry out further testing.
okay got it working Zet-Sensei
my friend honkey kong sent me the correct bios file. that made it work
I am also able to do the in game level save and restore which is nice
thanks everyone for their help. very fun game
@tired flicker thank you
Okay, strange as you said before about the BIOS being pushed by Update_All.
For the record, it was panafz1.bin that worked.
Yes, we know it, but why is it an incorrect BIOS that was pushed ?
Update_all should push the correct one immediately.
MD5Sum is a touchy subject here.
I learned that the other day and saw a message from Robby passing by about that subject.
Thanks.
Anyway, thanks for the help.
No problem. I was in the process of making it work myself.
And enjoy the 3DO core @vocal meadow
thanks @umbral charm , I appreciate it. You as well!
Okay, the core will now work for everyone.
srg320 had to add some more memory refreshes for some SDRAM chips.
I am already building
It's 3DO day!
That's the reason for the illegal instructions on my end, and the black screens or why some people could load or not some games.
Always brings a tear to my eye when I see a new build drop and so much activity in this thread. 🥲
Nishimura Keitarou Travel Mystery - Akugyaku no Kisetsu, MicroCosm & Kurokishi no Kamen for everyone. 🎉
for the quick fix
Travel mystery still blue screening for me. I will never solve it :/
Try it as a CHD 🙂
some mysteries must stay mysteries
same for me no luck
no linking roms please
sorry
Is there a specific 3DO game that is known to give problems with the single ram core?
Want to give it a shot
Games probably do their own thing. I've never looked at Policenauts.
No luck with Microcosm (USA)
Thx, uploading it now will checkt it out
for me Microcosm boots fine now
new core 3DO_20260409? I haven't tried with this update.
Looks good chief
yes
On latest core srg just dropped and on superstation (bottom right of pic)
i'll try later, thanks!
This game looks like you are flying through someone's anus
The game to try is Nishimura Kyoutarou Travel Mystery - Akugyaku no Kisetsu - Tokyo Nanki Shirahama Renzoku Satsujin Jiken (Japan)
as that game only boots for like 3 people
God's chosen
it's one game
only when compressed as a CHD for me
goddamnit am I really making a CHD of this
Indeed you are
didn't they just release a front end for chdman
The game is a rail shooter where the player navigates small craft through the human body
#software-emulation message
Glad to have you on the team
Iso of travel mystery
The man in the phone booth is dead
Remember tha game, BlueMaxx
the lesson: don't go into phone booths
Ok, well, core's done I guess. Great work everyone
Chd
it's true, seal of the pharaoh seems perfect now, core's done.
Where do I sign the membership form
But muh Need for Speed! 
It is crazy how many games are on 3do. Obviously debateable how many are good, just don't remember this many being available back in the day.
Still no swing gauge in PGA Tour. 🏌️♂️
Hard mode XD
I made it onto the fairway!
The core isn't done, in the future we will have multi-disc support, and PAL support too.
It lacks multi-disk support? In what way? Don't you just load the second disk?
The core freezes when switching discs
It is really weird to me that consoles became standardized right around the time of game engines
how are the porn games on the console? they seem corny in a way only 20th century pornography can be
Quick question about this behavior on SSF2T (rev 2):
I’m seeing these fixed white blocks on the speed selection menu (behind “1 2 3”). They don’t move and stay static regardless of the option selected.
Is this expected behavior (original hardware quirk), or is it a bug with the core?
For reference, here’s a photo of what I’m seeing
@tender crystal
Your skipx question is answered
In this long play video the box around the numbers appear to blink
That's a bug in the core.
Obviously I dont know if this was captured from R.E.A.L hardware or emulator
Would be a bug. It should move. But sounds like he addressed the incorrect "skipx cel feature is only for unpacked cels" issue in emulators. On my todo list to fix in Opera.
If they don't say it specifically in the video, or write it in the description, assume it's an emulator
To get technical... for some reason Capcom, rather than literally positioning that box over the number, its actually positioned like 12 pixels off then 12 pixels are skipped from the left. It's weird.
Yeah I did, I just thought I would take the effort to spell real with the dots xD
Here’s a video showing the issue:
Taken from a friend 16 years ago.
But how do we know that 16 year old photo is not from an emulator? 
Some people recorded themselves on VHS or DVD-R back then, for Superplays videos.
Because emulators have a bug and don't render it correctly... including mine 😉
I recorded gameplay on vhs and DVD-Rs just for myself too XD
No... but Opera is based on Freedo (as all of them) and that bug is OG.
And Freedo is over 20 years old
Last time I tried an emulated game in Opera it was a joke of a mess with vertical lines everywhere
Ok, it was technically Chrome, but same engine underneath
Super Wing Commander gets past the title screen now, but no buttons are recognized to start new game
disable pad 2 and reset the core
is that the game's bug?
Not sure
Why should you spend $60AUD on Street Fighter 2 for the Nintendo Switch when you can buy the 3DO version for $5AUD?
Facebook: https://www.facebook.com/windycornertv
Twitter: https://twitter.com/windycornertv
For the exact moment with a real system.
That worked. Childhood restored!
I had a 3DO back in 1995 Wing Commander III blew my mind back then It was crazy I couldn‘t this was an actual video game It’s still an excellent title
I think it is a core bug, once you actually connect a second controller (not just enable it in the settings), the first controller starts working.
It would be interesting to have a 50hz option for nostalgia as my fz-1 pal machine runs at that speed
So PAL games don‘t run on the core at the moment?
Another World did for me, but at 60hz
I noticed a lot of 3DO games are (USA, Europe) so I assume they had NTSC/PAL modes baked in
Super Street Figher II Turbo Germany also works fine, but i runs in 60Hz anyway.
They didn't translate anything ingame, it's practically just the NTSC version.
today's new build is running everything I can throw at it - awesome
Of all games i'm just playing Shanghai. And it's still fun (like 35 years ago on the Amiga). 😆
If any of the devs need me to test anything on real hardware let me know. I actually own a lot of the more popular games on the system as well.
Bunch games working like butter now that I updated to the unstable Main, and the latest unstable RBF. Looooving it. I didn't give 3d0 enough credit w/ my last comment. I do love me some Road Rash on 3dO!..
also some Corpse Killer, can't go wrong!..
I did not know those were beads, that's pretty cool. @fossil sorrel you profile picture rocks
I already prefer the MiSTer core over the 3DO emulator in Retroarch, someone tell me how wrong or right I am
Not having to use Retroarch is always a win
Ur a bare metal emulator
Wing Commander is still so good. Got hit by an asteroid and all my cockpit scanners were destroyed. Guess I'm flying blind on this mission
I could probably be convinced to kill in the name of getting a second Freelancer
Last 3DO core version is OUT "3DO_20260409.rbf" ! MICROCOSM work now on my MiSTer ! 🤪 🙏 FMV = ok ! Thank you very much 😉
You don't need to post it again, Tim. It's posted above, my friend
Oh sorry, i didn't see that. That's ok.
Like for example, what it says on the title screen
The more ways to play the better. I've shared a lot of details with srg so he can build his core. This isn't a competition. RA and libretro has lots of issues and I'll be the first to admit them. There is still a place for software emulation and Opera. Especially as I get time to work on my "3DO Opera v1.5" hardware project which currently might not be plausable on MiSTer.
And for development work (besides the obvious traditional usecases)
Would it be too soon to open a GitHub issue?
yes
Thanks brosef! My daughter made it. It was the only photo on my tablet when I went to choose a picture for my avatar all those years ago...
Lucienne's Quest has this pixel flickering effect throughout the game, most apparent during a battle.
I'm assuming this isn't intentional, since I've seen footage where this doesn't happen.
we are going to need dual ram to fix that
Hush, you!
I found some footage on youtube that claimed to be captured from a real system with the pixelfx hdmi mod, and it shows that pixel flickering.
Hmm... seems to be a lot more pronounced in my footage.
it is more pronounced on the core yes, but it does seem to exist on real hardware, it's quite noticeable on the dirt walls of the terrain, to the sides of the battlefield
For those who want to enjoy the majesty of 3DO in the background, SAM now supports the core (thanks @simple sinew)
i doubt trap cares either way
So, amusingly, the 2nd disc of travel mystery loads just fine as bin/cue
Nevermind, I lied, this is the CHD of disc 1. It was complaining about disc 2 and I just assumed it was telling me i had the wrong disc inserted
Mystery solved! You did it!
Is there a clever way to do a custom controller config for let's say juuust Mortal Kombat II?
Yes. I believe it would involve MGL files, and a setname
So new build is working well for everyone now? Just getting around to playing with it, Gex saves without freezing so that's a good sign
Sooo good. Corpse killer is playing stellar. Very impressed how smooth the FMV playback is on single RAM
Would you say it's the best version of Corpse Killer you've ever played?
i was going to ask if samurai shodown plays like 25fps is an known issue, then realized from youtube videos that's how the 3do version is
Ummm to be honest, I haven't put enough time into the Sega CD version to compare. It's playing super solid though
Crash n burn running fantastic too
Did you know there is a Saturn version?
I'll expect a full report on my desk Monday morning.
Haven't tested it on the latest core yet, but a couple builds ago the game was great until the last track on the first circuit. The one that is in the sky on the glass like road. Some pretty bad graphical corruption on that one.
Crash n burn is actually a pretty decent technical show piece.
It especially was at launch. I was blown away by it at the time.
Despite being a mediocre racer, the zero pop in and render distance makes a lot of people think it's FMV for some reason lol
Samurai showdown is running excellent also
I get a bit of graphical corruption at the top of the screen in need for speed. Nothing too bad tho.
Also not to mention the infinite scrolling plane used for the clouds. I forget cnb had those
It will be nice to try out more games for 3do on mister. I only had like 5 games when I owned a 3do
This already runs better than any software emulator Ive tried.
Hi guys! A friend of mine, a great player of beat 'em up, played SF2 on the latest beta of core and said that the game seems to be running a little too fast for him, is it true or simply the 3DO conversion is made so?
Hello everyone. Could you please explain to me, step by step, how to use save/load states?
Thanks
There are no steps as this core doesn't save states
Having played it for over 3hrs last night in VS and owning a 3DO with the Japanese SSF2X, the speed is identical. Is he used to running the PAL version? That has borders and does run slower on R.E.A.L hardware
I will ask him, thanks!
As a reminder; this is like week TWO of the core being public. There are going to be visual and audio bugs, game speed being too fast or slow, and stuff just not working.
Thanks for posting your experiences in this chat, and especially a huge thank you for comparing to real hardware. If you can please update the Testing Sheet with your findings - #1329170138234097745 message
ATTENTION!
Please consider donating to @crisp zealot on Patreon - https://www.patreon.com/srg320
He works incredibly hard to make all these amazing cores and every donation helps. If any of his cores (SNES, Saturn, 3DO, etc.) has ever brought you joy, you can show him appreciation by donating at the link above. Every little bit helps!
I don't quite understand. Are there some nuances to the SKPX feature?
That version of Corpse Killer drives me crazy. It's the Graveyard Edition and supposed to be the definitive edition bc it includes extra content, BUT it has no light gun support. Talk about fumbling that release. So by that alone the 3DO version is probably the definitive edition
The only bigger botched light gun release imo is Revolution X. It released on many platforms, and not a single one had light gun support lol
We don't have lightguns on 3do right?
And if you’ve pinged the poor guy on here and you’re not donating, doubly consider it. His life is responding to @s now. A life of horror. Aka Robby’s life
So maybe Sega cd is best
Sega CD+32X you mean lol
Good lord
There were only 6 Sega CD/32X games. All were Digital Pictures games. Go figure
i meant for mister users
3DO version of Corpse Killer has light gun support so I'd say it's the best version
Sega cd/32x games are cursed
Would've been cool to see the power of the Sega CD+32X for non-FMV games, but only the most die hard of Sega fans had both a Sega CD and a 32X
Most die hard or most spoiled children.
Yes, if you read the docs it suggests that SKIPX flag is only for unpacked.
And I suspect that is why software emulators have not implemented it.
The only place I know packed skipx being used (obviously so because of the distortions it causes) is SSF2T speed select
I debugged the problem maybe over a year ago but haven't fixed it in Opera yet.
Oh, right, I found that in the documentation. Thanks.
np
Many had asked about it for years and when I first was debugging it I was really confused as it just seemed to be 12 pixels off but the code seemed fine. Then finally I noticed it was packed cel and had skipx enabled and had recently reread the docs that talked about skipx and its suggestion it was only for unpacked and it clicked.
ooh are we getting fpga core/software emulator development synergy? love to see it
@ember seal we've been casually chatting for some time 🙂
I've shared all my documentation with him.
(Not that most of it wasn't already public)
documentation is one thing but actual dialog is even better 🙂
True. We aren't communicating daily but I'm here for him any time he has questions (and anyone else for that matter.)
I've read said docs probably too many times 😄
Putt putt joins the parade works from start to finish 🙂
can´t load .chd files from external drive, single ram user,
are they listed? or does the folder appear empty?
folder is empty (CHD-3DO from archive....), now I will try bin cue
try putting one CHD is it's own folder and see if that folder shows up (and if selecting allows you to load it
update all fix it, thanks a lot!
I also finished Putt-Putt goes to the moon on the core 🙂
cores done
One of my all-time favorite childhood games on my PC. I was thrilled when I learned there was a 3DO version. Can't wait to play through it 🙂
My other half loves the putt putt games and asked me if we could play some today so I thought hmmmm I could test them on the 3DO core 🙂
Killing Time is perfect. Core truly is done
I 100%’d it last night. Zero issues minus one line of pink pixels
the core is really in wild shape
I did a bonus video that’s just “the core is perfect…for me” 🤣
One line of pink pixels you say!?
Garbage! Send it back
I would love a quality book covering the 3DO, like from geeksline or someone.
ok so using superstation one and i get the bios to load and i get in to the gui but with nothing but the background. Kanji rom is there and have tried multiple ISO images none working. Anone run into this?
Do you have the latest unstable Main MiSTer file too ?
no i have not done an update all on it, was creating a new sd to have a fresh one and make sure that is not an issue
So that must be the cause.
We need the latest unstable MiSTer main for adding some support of 3DO discs, otherwise the core can't see or load the data on the discs.
Some commits of srg320 from March 23, 2026 & March 30, 2026 on the Main MiSTer file are required for the core to function fully.
The last stable version was on March 25, 2026.
So in-between.
if you're using stable main, the english roms will load, but you cannot save, and anything that requires the kanji rom won't work
I need help. Need for Speed keeps giving me the "NVRAM Full" error. Is there a way to get around it, or do I have to wait for a core update? I have the latest core version and the latest unstable main. Thanks.
delete 3DO.cfg in your /config folder
I'll try it right away, thanks
We had a similar case with Alone in the Dark.
Deleting 3DO.cfg inside the /config folder is the right solution too.
I'm leaving that message if we need it one day for helping other users.
In the config folder I only have the config input (3DO_imput.map) no 3DO.cfg, nothing in nvram 🙁
Maybe try deleting the core and get a fresh build. Always a possibility it got corrupted somehow.
I can't save any game at all.
Another thing to check, assuming you have been around a while, is to make sure that you don't have the custom MiSTer line in your ini
Auto save is enabled, load/save ingame works (e.g. Sherlock Holmes) but after restarting the core no saves are there.
You need the latest unstable main for the saves to actually commit to a file. You need to open the OSD after saving to trigger that. Saves ingame have worked since day 1, but they were never commited to disk and lost upon loading a different core, or shutting off your mister.
I have everything in place
Jack, can you try deleting the 3DO.cfg file?
It is causing some weirdness with saves
so better to clear that out just to be sure
Tried that too a few minutes ago.
external SSD shouldn't be a problem, right?
Hey, @crisp zealot , if you tire of visual glitches, here's an audio one. In Shockwave the engine sound instead being a nice low hum with a little white noise mixed in, is a pitched tone (right in the metal-splinter-to-center-of-your-brain range) much higher and louder than it should be. Maybe some effect in the audio DSP is not implemented or the wrong flag is being applied. The issue is in both Shockwave and Operation Jumpgate but not in Shockwave 2 (at least not the first ground mission).
I'm on 06.04. is that a bespoke main that I rolled or is that a legit unstable
oh it's just the SNI stuff for SNES
so it wouldn't matter
Only one way to test
The best is to delete save files, and try again
I can absolutely verify that saves are loading from previous cores, in Escape from Monster Manor and Killing time, on the current unstable main. And saves are saving properly in the current core and unstable main in Killing Time.
But one of them was Snatcher 🙂
Mortal Kombat II ingame
3DO 26.04.09 single RAM
Config:
Elgato HD60X
RetroTink 4K CE
Mister Discord
https://discord.gg/d77ajRmPVN
Device:
MiSTER Pi - Retro Gaming FPGA Board
Turbo Pack
I am not sure how gex saves
but it did not save
beat a level and rebooted (after opening the OSD)
Ah, deleting the saves for Sherlock Holmes and trying again worked. Very strange. It was a fresh save game, from a few minutes ago that didn't work.
I can. I got CHDs working on TransFS earlier. Zaparoo’s remote launcher doesn’t support it, but manually launching worked just fine.
Edit - Ignore me, discord wasn’t synced, I see you fixed it.
The game saves after the 3 first levels, if I remember well.
well there you go
My brain is some 'jello' after a long day at work here.
For today, I will just test some obscure JPN games and creating a save of Policenauts without having to watch the whole long intro once again.
I will not be very useful for the core today.
Zet, does SRG have any idea why the CHD for the mystery game works, but not the bin/cue?
I didn't had any time to talk with him since yesterday and the release of the 04-09 core.
We were very busy or not available.
Gex saves for me. You need to find the VHS tape in the 3rd level and then beat the level for it to save. This is normal behavior; the game's just stingy with save points. I'm using the single ram core from April 7th

Look at him. Just staring at you. Mocking you if you will!
Some FMVs have incorrect sound timings, the most evident for me is on YuuYuu Hakusho.
On the second part of the intro FMV, the music speeds up and slows down very rapidly.
Just after that moment, when you see the logo.
yeah it starts skipping all music in the game too
and voice lines got random corruptions
And something else now.
I almost finished The Yakuuken Special with all the girls.
So, you won't never to do it. Never again.
That game cheats like never and reads your buttons + that game theme is pure ecchi (erotic) with some basic stripping rock, paper, scissors.
Thank you for your service 
I had to explain to my spouse.
That was just some fun for you here, let's go back on serious mode now.
"Test" the core next with Blonde Justice and then The Coven
Vivid Interactive, sure.
I saw many people talking about Samurai Shodown on the 3DO, and I don't mean just here. Is there something special about the 3DO version that wasn't in the original neo-geo or other versions or something?
Step 1:
Probably just 3DO hype in general. It’s a really big deal that were getting a 3DO FPGA core
The FPGA gaming hobby has grown by orders of magnitude since I joined in 2020
Nah nothing special, i remember back in the day enjoying a demo disc of it on 3DO but it doesn’t bring anything extra
I tried adding 3DO to my names.txt, it doesn't seem to be doing anything. I used 3DO as the core name and Panasonic 3DO as my replacement name. I'm still just seeing 3DO. Is it not possible to change yet?
i agree! i didnt think it would get as large as it is now.
One major factor is that it became more affordable, that and SBC emulation like RetroPie became stagnant.
3DO: Panasonic 3DO
Try it like that.
that did it, is there a certain number of spaces / tabs needed to work properly?
Not particularly, perhaps you had a character that the menu didn't like.
I also think the appeal of MiSTer is pretty strong. We’re getting to the point of being able to accurately play every video game console from the 20th century sans Dreamcast. That, plus the arcade games and the PC cores in addition to the public knowing more about FPGA thanks to Analogue and ModRetro
I’m really excited about getting a handheld MiSTer. I hope Taki delivers on that
There's still a few outliers, like the Bandai Pippin or the FM Times Marty, but yeah being able to play things from certified classics to niche curiosities on one device is pretty awesome.
Damn, this core is looking great already
no issues spotted so far with the handful of games I've loaded up
On the core?
Yes
Still too early to discuss peripherals
Sega CD remains the best way to play Corpse Killer on mister.
Yeah, I was asking the other day what's still missing, and named FM Towns Marty, Game.com, Super A'Can, but thanks for reminding me of Bandai Pippin. This 3DO core is a dream come true though.
There’s a lot of 2nd gen consoles, Memorex VIS, Amiga CD32 standalone core, etc. but in terms of all the mainstream stuff, everything’s covered at this point up to the Dreamcast
NGPC is hopefully gonna release someday from Jotego too
When I say mainstream I mostly mean the big names in console gaming: Nintendo, Sega, Sony, SNK, Atari, and NEC
There are still a good few consoles left, but the average gamer would struggle to name them. Mostly pretty obscure stuff, and/or not released in the US
We have a channel to muse on such things though
#1055132056096624650 message
We also have cps3 coming from jotego
And a PGM from Wikka, which is more exciting imho, but both of those are arcades and not consoles 🙂
And virtual boy, exciting times for fpga
2026 is the year of the virtual boy
The 3DO Company - 3DO/ Panasonic 3DO
They can do that?
Ohhh
noob question, i know, but can someone direct me to the 3DO core?
until he takes a few days off for a shootenanny and everything starts getting released
you'll need the unstable MiSTer file too
many thanks! I couldn't find the pins (discord first-timer)
NP, on mobile you need to click the channel name up top to see them
perfect! was on desktop but now found them. if i'm honest, there's a lot going on with this GUI.
yeah its a bit of a mess
Finally, I can play Seal of the Pharaoh the way God intended
Gameplay Star Fighter
#gameplay #retro #videogames #3do #avion #shooter #piupiu
watching the intro to this. why is every 3do game a rave?
cannot help but bust out some moves
I actually quite enjoy Seal of the Pharoah
@crisp zealot you're a wizard, improvements between the 2 beta releases is unbelievable
Many bugs are gone, much better compatibility, no more crashes ...
Wow ...
Because everything was a rave in the mid 90s
Um, so, what are the best exclusive games or very darn goodie games on 3do?
ssf2, gex, nfs
You know what would be absolutely nuts? If you could connect the controllers to a 9-pin SNAC and achieve multiplayer through daisy chain
What with their ten foot cables and all
Doesn't help to me to fix Need for Speed. Even after I deleted 3DO.cfg (and a few "recent" 3DO-related config files) and power cycled Mister, I keep getting this error on the core from April, 9.
Deletion of the sav file from the saves/3DO directory doesn't help either.
I have a link to a list of game recommendations pinned actually - #1329170138234097745 message
Def didn’t see that. Thx 🤘😎
These games aren’t good
They’re great!
Try Immercenary, Captain Quazar, and Icebeaker out.
Thx. I’ll checkm out
While not "exclusive" 3DO has the absolute best versions of Total Eclipse, The Horde, Space Hulk, and Need For Speed. Oh and Star Control II is absolutely fantastic
And damnit try out Pataank and Gridders. They're neat.
And damn my favorite game on the entire console! AD&D Slayer
Although Road Rash on 3DO has worse framerate than the Psx or Saturn versions, I believe it has better colours and the backgrounds fade in instead of popping in.
I strongly prefer fading in to pop in - don’t know why more developers don’t chose to do that. It’s less jarring
Seemed to sound better too
Couldn’t enjoy it on ps1 or Saturn just seemed off
It's kind of fascinating when you play a PS1 or Saturn game, and you can instinctively tell they were originally on the 3DO. They always have a specific vibe to it.
It's kind of similar to how you play an SNES, Mega Drive, or PC Engine game, and you just know the game was originally on computers.
and it's always fun to discover how better/more complete 3DO games are on their platform of origin
like Gex, or D
Total Eclipse Turbo is way too turbo
Yeah there’s been a few games that have popped up that I’ve looked into and found the 3do was the best one and been a bit disappointed
Now I can play em!
Even if the core is still unfinished it seems very playable
I think that's thanks to the cheaper alternatives (pi, qmtech) that reduce the original price to half or a third. I've seen what I got from retro remake for 200€ costing 600€
3DO bros 4ever
3DBROs
How could I have missed this...
Too busy enjoying the 3DO core
What a fab core 🫡
Just a quick question...
Tried a Europe version and get "Wolfenstein 3DO can not run on a NTSC console" (confirmed in testing Spreadsheet)
Weren't 3do games region free?
I watched that one Famicom retrospective, and you could see the author's disdain for European Computer games grow with every port
Ah... Thanks for the update
And Sanyo!
Agree the channel name looks silly, why not just 3DO 
come and knock on our door. we’ve been waiting for you. where the crap games are hers and hers and his. 3DOs Company toooo
mods aren't in touch with the people
Trip Hawkins 3DO Company - 3DO
Sing it with me, friends
🎶 🎶 🎶 🎶 Leeeeeeeettts Scrollllllll Uuuuuuuuuuuuup🎶 🎶 🎶 #1329170138234097745 message
Maybe we need a Goldstar channel so some people are not left out
Yes
This is what happens when one person gets a little bit of power
New channel name: The Three Dee Oh Channel 🤭
3DO
I dunno who named that channel but it was terrible
The 3DO channel, For the 3DO by 3DO
F3B3(do)
Hello, it's not possible to remap controls for the moment ?
should have named it 3D0 and pretended to not understand why people are complaining
you can, just like any core
i don't have option in menu
menu > right > remap controls
3DZed
lolol
We are going to get banned
but sometimes you give the body not the point
Ok, I'm changing it back before SRG wakes up and is disappointed in all of us
Trip Hawkins' 3DO
I mean, I like it lol
Can we as a 3DO community come together and just admit that the Panasonic 3DO is the canonical and official 3DO?
I'd second that motion
Like who out there reppin’ for Sanyo or Goldstar? Be real now, bruh.
Never! I’m team 3DO Interactive Multiplayer
I’d just call this channel 3DO Interactive Multiplayer
Trip Hawkins' 3DO? 
320DO
Excuse me, "the" Panasonic 3DO? FZ-1 or FZ-10?
3DeezNuts
That's weird. I didn't think there were any Simpsons titles for 3do o_0
Sponsored episode
meeeeeeeeeeeeeee
I owe you an apology, I wasn’t really familiar with your game
3DO longplays — https://www.youtube.com/playlist?list=PLR7vyJj51kqfsKgxvOq6Zvtaaed4iOJ2t
1993 - Games Longplays — https://www.youtube.com/playlist?list=PLR7vyJj51kqcMqiaRtuUoQBi5hYjldfwJ
Living Books longplays — https://www.youtube.com/playlist?list=PLR7vyJj51kqcLuq65py03Sy1QCbJgCABb
Ok what the hyeeeck is that game about?
Birds
You know, that one is my fault
Reptiles
My digital pad mapping is messed up. D-Pad down was not recognized in the game but analog down worked. I remapped a few times but this did not fix it. I then remapped it again and now the D-Pad does not get recognized at all in SSF2Turbo probably all games. Digital is turned on in the core for both player 1 and player 2. I’m using 2x PS4 controllers with 8Bitdo wireless adapters brown/red color. What could it be? How do I do a reset of mapping? The reset does not seem to do it…
Did you set the analog in main to dpad?
What do you mean in main? In the 3do core under input I have pad 1 = digital and pad 2 = digital.
Like in the main menu mister controller setup when it says set "up" did you set it with the analog stick or did you use the dpad?
Like the controller setup outside the core
Right now I have ditched analog (dual mapping) and just set it to dpad (udlr). It still does not work …something is odd after hitting multiple directions on the d-pad it decided to move up on the menu and then stop working again? Hmm. How do I just manually delete the 3do button mapping file in the file system? Where is it located?
/media/fat/config/inputs
Shelley Duvall's 3DO
Deleting the 2x 3DO input files in the inputs folder fixed the controller problem. Thanks
Is there a specific reason why Super Street Fighter 2 Turbo does not fit the screen? Inside Audio & Video I have tried changing 320x224 Aspect: Original/Corrected but it seems to do nothing.
how does it not fit the screen?
There is a 1/2-3/4” black border around the playable screen on a 60” 16/9 LCD. It appears zoomed out. I don’t remember if it was this way on the actually console. It’s been too long.
This may be just how the game is, it would need to be verified against real hardware or footage captured from real hardware if you can find it.
That seems to be how this version is: https://www.youtube.com/watch?v=yrNU0F6S-k8
#retrogaming
#streetfighter
#capcom
🔸 Youtube : https://www.youtube.com/@DGJX
🔸 Twitch : https://www.twitch.tv/dgjxboloss
🔸 Facebook : https://www.facebook.com/TheDGJX
🔸 Twitter : https://twitter.com/TheDGJX
black border and all
Perhaps the black border is not that noticeable on a CRT because of the overscan area on the TV?
yes, overscan hid at least a few things in different games. The eye of Typhoon has graphical corruption around the edges of the arena that would normally be hidden by overscan on a CRT.
Have to say, for the first single sdram release, it's running really well. Hardly had anything fail to load, though as others have said you do sometimes need a double reboot between games. Really impressive stuff. Does need the borders for CRT though, it's way too "zoomed" in. Of course I know that's low priority right now
Do you have a link?
#1365341352648507495 message
Yes, if you see anything odd with a game always make sure to compare against the original console first. Most issues are just normal game behavior. It’s wild.
3DO 
the man himself talks 3do core development
also if you’re not reading read only memo you are missing out
Btw I feel the Image ist slighlty dark in the core could that be? Like in D I can't barely See anything
Love the stupid German dubbing If Dragon lore
I have returned to single ram
one pump man just like the rumors said
Dual ram was not as bad as i had feared. But analog io pro is the best.
Yeah I bought a second stick w/ my Mister Pi before I understood the either/or situation. I'm a hard nosed CRT user, so I was in no way going to sacrifice my legit analog outs
Is the mister main updated in update all yet by chance? Didn't want to accidentally overwrite the experimental one for 3do if I run update all
The recent Saturn improvements with single RAM fast timings is pretty incredible. DOA runs great with it.
That’s what it should be
Can someone help me? I can't run any games in this core.
- I downloaded the latest core release (single ram), the one without "load from CD" option. I have a dual ram setup, BTW.
- I replaced the MiSTer build to the lastest unstable nightly.
- All games are in BIN/CUE format.
I can't past the BIOS screen. I load a game, the 3DO logo flashes 2 times and goes straight to the BIOS screen. Did I miss anything?
Did you supply your own BIOS, or get it through update all?
Got the Goldstar one. Well, guess I missed that update. Let me run the update all script to check if it gets another BIOS.
It needs the Panasonic FZ-1 BIOS
that's the only one confirmed to work properly AFAIK
Okay, got it. Thanks. I'll try that out.
Update all will not replace existing custom boot.rom BIOS files BTW. You would need to delete or rename it before running update all for it to properly grab it.
Oh its on update all now?
Ah okay cool thanks!
la 3DO tiene un sentir de una época... pero es una consola horripilante en catálogo.
cambiar una megadrive o snes por la 3DO o Jaguar en su día pudo haber supuesto graves consecuencias a la diversión.
I'm so glad we don't have to play Doom with these borders in 2026 😵💫
Play it with a modern engine if that kind of thing bothers you
Nah brah
K' bruh
@crisp zealot I'm messaging the guy who scanned my 3do chips so see if anything has been made public
Fun story there is a code to expand the screen size because M2 was intended to be backwards compatible with 3DO and would have been able to run the game at well beyond 60p
Or just run Optidoom haha
You can use direct video
But it does take a little more extra setup
What's with the channel name?
There are some niggly little problems with direct video.
So its not really just a one to one switch.
Ok, what was the original channel name and why did we change it?
I think it was “3DBlows feat. Trip Hawkins”
First I think it was The 3DO Company - 3DO, then Panasonic 3DO
I think it’s had many names but eventually someone made it too long so it became 3DO again then this 😂 I vote just 3DO or 3DO interactive multiplayer
3DO Interactive Multiplayer
Ok TVs j you
Thank you
Thank you @marble jetty
Cut out the middle man and name the channel "Hip Trawlkins"
3DO FZ-69
How about Panasonic FZ-1 R.E.A.L. 3DO Interactive Multiplayer by Trip Hawkins 
What does R.E.A.L. Stand for?
I wish I knew 🤣
Panasonic, Goldstar and Sanyo all used the 3DO Interactive Multiplayer naming so this channel name works
Remember that we have a yellow in here now. Is it really so important to discuss the name of the channel? 
I was just trying to point put because the core dev is here giving the channel silly names seems kinda childish
“R.E.A.L.” Was only a marketing term. Many online speculate it had something to do with its ‘real-time- visuals, but the ‘acronym’ didn’t mean anything….While "3DO" itself is often cited as an abbreviation of "three-dimensional optics" or as a play on "audio" and "video," essentially meaning the next step in interactive media (audio, video, three-deo).
I owned the GoldStar version of the 3DO back in 1995. I’m the only person I know that ever owned one. The games were often disappointing, but at the time, it was state of the art.
Everytime I think of this core my brain floods with endorphins...aaaaaaahhhhhhhhh there it goes.
I wonder if road rash has more frames with the dashboard displayed since it’s obscuring part of the screen. Anyone know?
I forgot to return here to say it worked. Thank you very much.
Although, I can't run most games. Tried Gex, Microcosm, Casper and some others I saw videos of. No success. Same with Road Rash. And they worked with a FZ-1 with the Fixel ODE.
But Gridders ran fine. So... I don't know.
I have a dual RAM setup and I have some other modules to spare. Maybe is the RAM speed?
Edit : I didn't saw your previous messages.
Maybe try with another module.
good question and no clue
At a guess I would probably say no because the pixels are still rendering but with a extra layer hiding them.
It’s a fun game, I’m just remembering how much better the megadrive ones played with their improvement hacks that one guy did
Only way to play those games
I will have to give those a try 
i don't think the 3do game needs them quite as much. the megadrive games had really bad frame rates to the point that the hacks make them significantly easier (but in an oh this feels fair now and like the devs probably intended)
i beat 2 without the hack and it took me ages
Channel name needs "R•E•A•L" at the start of it!
hope eventually we get overclocking options
the library in Killing Time got to my nerves and I abandoned that playthrough to beat Time Consumed TC in the remaster
It was only used by Panasonic
Everyone knows it's the R•E•A•L name!
It’s on the console so it counts
And we’ve all agreed that the FZ-1 is the canonical model
you're a canonical model
not a lot of non panasonic 3DOs one would actually use out there
Will the R.E.A.L Panasonic 3DO please stand up
for me the Panasonic FZ-1 model is a beautiful console
Looks great
Even now I would gladly put it under the TV
Wait a minute, how did I end up in the multiplayer channel? Where's the one for single player 3DO games?
I played 3DO road rash all day and it didn’t crash or mess up my saves
I think I saw a couple glitches possibly but minor stuff (screen flashing, a random tree in the sky etc - that one might just be normal)
Was trying to finish it but I suck apparently 
Haven't been able to keep up the last few days, how is the single ram core looking compared with the previous dual ram core?
Yeah, but are there any issues on the replacement single ram core or no new issues found?
No regressions or new issues going down to single ram over dual?
I don't believe so since development on the dual-ram core has stopped
I did notice I felt less of a sense of superiority
If nobody has noticed any issues then that is very positive
I think the only issues I've found are specific to the 20260409 core, not the move to single ram. Ultramans intro FMV video skips like crazy now
Just because this core is not gonna be 100% accurate, does not mean that almost every game will be unplayable, right?
N64 core turned out pretty playable despite that
True. But weren't there like a small dozen of games that were unplayable on Mister, thus needing some patches?
I think they eventually got fixed but not sure
The N64 core patches the games that need it on the fly
If you check the testing sheet you can see that most things play absolutely fine already
👍
Anyone looking to test something not looked at yet, the homebrew tab could use some eyes. Link in the front tab in the doc on where to find them
Not that many homebrew 3DO games, huh?
May be more but these were the ones on the site
No. Those are Sony drives. Fz1 uses Matsushita drives
Did you ask your mom?
She’s dead. She died of boredom in bed with you
But she is dead 🤣
Did anyone happen to catch this today?
Maybe the core will be half and half like the GBA core?
Or is it one of those “it’ll be accurate for the most part but not so much for the little quirks and things”?
Also wonder if making this dual RAM only can fix that
Sounds like it really needs more bram on the FPGA, srg320 mentioned there was no performance impact when he moved the core from dual SD only to single
That article just presents like the fpga is the limiting factor despite quoting the dev saying we don’t have enough information on how the 3do works
It’s still very cool for us to have a 3do core. Thank you srg320
Yeah, timeextension....
The read only memo article/interview is good
I just brought it up because I didn’t see anyone do so. I know they usually leave things out which is why I asked
Id say the timeextension guy's definition of 'accurate' differs from what was intended
Was just responding to 3domaxxing. The source of the story is good and the core is excellent 🙂
I know there are accuracy purists out there n that's all well n good. If I can't tell the difference that's good enough for me
I mean, like I said in the comments of the article, it not being 100% accurate doesn't mean a whole lot in practice. The Saturn core isn't either, and yet it's still the most accurate way to play Saturn outside of original hardware. N64 is also very good for the most part outside of the Madden games and their exploding players.
The madden thing is a feature really
As it should be.
ignorance is bliss!
As long as I can play pretty much whatever I can throw at it, I’m good.
Also, it should at least be more accurate than a standard emulator. That to me is important as well.
Same. If someone wants to sit there and pretend they can tell something is like off by a single pixel hey good for them
Didn’t they mention that it will be accurate on MARS?
In our quest for perfection, we forget the most important thing: the joy of playing games. That's what matters, I think. Whatever the type of FPGA, it will never be a perfect implementation; perfection simply doesn't exist in this field. The 3DO core was a godsend for me, so I'm surprised it was made available (thank you a thousand times, SRG320). And speaking of dual RAM, there's generally no need for it for such a small difference in some games (if you even play with it). It doesn't matter if dual RAM wins or not. Single RAM does the job just as well. The number of cores available on the MiSTer is already quite incredible; there's plenty to work with. Accuracy or not isn't the point if you can play comfortably. Of course, more accuracy is better, but sometimes you have to make do with what's already there. I am a gamer first and foremost, and I love MiSTer for that reason.
But we know how the vram works, and that's the largest factor. The latency for the framebuffer is incredibly fast. 3do themselves were unsure about that part of the hardware being able to be replicated in future 3do systems. Also the chips have had their die scanned, idk if the guy I sent my chips to ever made it public or not though.
TimeExtension dude doesn’t like MiSTer apparently
@sharp pendant I see that you say on the testing sheet that Road Rash has no sound issues but when I crash or take a bump I hear a strange beeping sound, I get this on USA and both European revisions, can anyone else confirm this or is it just my setup. A good way to test for it is driving and touching the steel fencing on the Sierra Nevada level.
#releasethechips
lol...I have thoughts
that was very nice of him...to write an entire article based on a reponse to my tweet that had zero engagement from the person who wrote it
now I am seeing all the negative comments and shit come through...MiSTer sucks. FPGA isn't accurate. 3DO doesn't run well. What a mess
Who cares what he thinks eh?
Want to know what I think?
I think the MiSTer is... refreshing!
I like your articles
Pulitzer caliber
Oh, my comment was for clicks and distortion like we had seen more in earlier builds across most of the library. If there is an actual sound bug then please update my entry on the sheet (i.e. put your name in place of mine and comment the issue on the latest build)
Even if the scans were the best scans you've ever seen of any chip ever, the thing about 3do is it was a high level OS and certain chip revisions lacked things others didnt. That's probably part of the reason only one bios works right now if I had to assume. One console allegedly offloaded cdrom functions onto the CPU. But the beauty of the system is that doesn't matter, since the OS is there and handling it versus having games written hard coded to hardware. So if something major changed in the hardware, there was a layer of OS that kept developers from doing things that would keep their game from running on future revisions (IE Saturn hardware revisions).
So what you’re saying is SRG320’s 3DO is as much a 3DO as any brand’s?
It's similar to how Russian/Chinese manufacturers made fake Famicons (Dendy). Yeah it functions and works, but it's not a famicon. I believe once the ram issues get sorted out it should be a fantastic alternative
Hopefully cuts down on 3do demand too lol
@distant grove when are you buying a MiSTer?
And I don't mean this in a bad way, just that on a technical level it's never going to be 100% unless a core is made for every chip revision. So green+, preen, brown, anvil etc lmao but that's way too fucking extra. Whatever he's basing his work off of now is clearly working well. Even the oldest chipset I have on hand runs the more advanced games except need for speed
Trying for super accuracy with 3DO seems like a waste of time, at the end of the day you have to play 3DO. Better time spent on good consoles
"yeah I like gaming, but like, I would NEVER play a game that wasn't made easy for children"
I'll be satisfied only when i can test susono cc/ekiden/tylenol on the core /jk
Huh
We have to (not us...the royal we) stop picking apart ever damn core MiSTer has. Why does this always happen? Lol Analogue 3D ships with bugs and issues and its "itll get updated" meanwhile anything MiSTer is "well akchually..." and it drives me nuts
So long story short, as long as it’s basically 100% accurate to a specific model (i.e. the FZ-1), then it’s fine then. Absolutely fine with that as honestly I think that’s the model people more know anyways. So as long as it just aims for that one specific unit, everything should be fine in theory.
Especially the fact that MiSTer pretty much gets updated on a near daily basis. So I don’t know what makes the Analogue crowd so superior. I love my 3D and Pocket, not so much the Duo, they’re a pain in the ass to work with, and believe me, not as better as one would assume.
I mean even the Pocket is a handheld MiSTer at this point with strengths and weaknesses over an actual MiSTer ecosystem build
Pretty much. The fz1 had different revisions too, but there is zero compatibility issues across all MADAM/CLIO chipsets. The issue with anvil that's been reported across forums (GDO 202/203 and Late FZ10 models) is an issue where the OS occupies too much ram. So it's not even a chipset problem. As long as he stays with his fz1 and reviews the chips I got scanned, the core will run all 3do games
I would estimate, just about 85% or maybe even 95% of the library was developed testing with fz1 systems and on earlier dev stations. Version 0.5 hardware and newer, ignoring Anvil.
This is a pretty accurate estimate if you assess testing station and dev units that have popped up for sale or in possession of someone. All have madam/Clio dev cards or they are fz1 testing stations. Fz10 testing stations are pretty rare. Even rarer are Goldstar testing stations. If you take a look at the library, and look at a game with issues on anvil systems, you can see Luciennes quest is a pretty late title in the line up, but wasn't developed on Anvil. Or else they would have seen the ram consumption issue by the anvil OS and it wouldn't have been a problem