🤝support

[shy relic]

you could update the alert with new sensitivity/agility values after the exit condition, changing sensitivity/agility wont affect an alert set prior to the change 🙂

[pine temple]

How to do that when I'm always in 10-15 trades?

[sand nacelle]

Hello. Any indicator to show volume?

[indigo cradle]

We have a good few 😉

Lux Profile

And lots in #🆕new-indicators

[night beacon]

Hi @ancient canopy,
Please email [e-mail] for any order enquiries and they will assist on the same day.

[tough turret]

Gents I am new and I want the best indicator for crypt futures

[shy relic]

Welcome 🙂 We offer many indicators that can fit many trading style, see https://docs.luxalgo.com to learn about our toolkits

[strange birch]

hallo

do you have optibot for OIL and NaturalGAS?

[mental folio]

Howdy folks, i'm getting a study error on Lux Algo Oscillators 5.0.1 when trying to use the Advanced mode. Any advise to work around it?

n/m thanks

[trail mortar]

People, new to lux. I saw that takiashi candles were possible in settings you YT review, is it real?

[sacred prairie]

someone help the ınstall lux ? ı buying now but not working

like this

[nocturne rune]

Hi, I am having quite a lot of these STRONG confirmations but as you can see they are really NOT strong confirmations. There's a STRONG BUY and then, a candle later, a STRONG SELL. And the STRONG SELL is not a STRONG sell, either. I have the settings adjusted. I wonder why this is happening. I need to trust Lux Algo's signals.

[feral lava]

Naturally, can happen in a ranging market - although, optimization can help with this always.

Have you tried the Optimal Sensitivity on the dashboard? Autopilot? Optibot?

[nocturne rune]

ANOTHER QUESTION: By the way, why don't you combine your multiple indicators on a single one, like, for example, Lux Algo Premium + Lux Algo Oscillators MACD? So, we could have better signals combining multiple indicators? When I say, COMBINE is to provide us with an ALERT with multiple signals combined.

[feral lava]

Exactly what we are working on right now @nocturne rune 😉

[nocturne rune]

Thanks for your reply. I tried the Optimal Sensitivity on the dashboard and the Optibot as well with similar results

[feral lava]

Filtering with Neo Cloud for example actually could help with this, as a "buy" signal below the Neo Cloud may be less attractive

[feral lava]

It is not really possible to achieve signals that always 100% appear good, markets are complex and Confirmation Signals perform best in trending market conditions

[nocturne rune]

where can I find the NEO CLOUD? Also, a STRONG BUY or SELL isn't supposed to be STRONG? So, why not a regular BUY or SELL?

[nocturne rune]

Thank you, how does this work? Similar to bollinger bands?

[feral lava]

Normal signals can switch between "strong" and "normal" as you can see on the candle coloring

It's a dynamic trend following cloud

Price below it & the cloud being red is bearish

it works as a great filter

[nocturne rune]

thanks. any way to have an alert with it and the BUY or SELL signals?

I like to sleep sometimes, you know? 😆

[feral lava]

yes, should be out next week

not currently

[nocturne rune]

In the same case that I shared with you above, I enabled the Neo Cloud feature. Price was ABOVE it and the cloud was blue. So it was supposed to be bullish, right? But then, the following alert was a STRONG SELL? How should I read this?

[feral lava]

What market / timeframe is that?

Looks quite illiquid

[sacred prairie]

i like this indicator ty ❤️

[feral lava]

🔥 🔥

[restive matrix]

any way you guys can make the advanced main columns more transparent as it seems to hide the advanced cycle behind it and makes it difficult to see the outline of it. I tried other variations..but visually I like the columns the best just not the fact that it hides the cycle behind it. Thanks

[nocturne rune]

Hey buddy, do you get the signal on the candle closing or whenever it appears?

[sacred prairie]

hey buddy ı just started i'm watching eth now i will tell you when i see it

flashed now

disappeared when the candle fell in half

[cunning goblet]

How can I remove those numbers after indicator name?

[sacred prairie]

and flashes according to the strength of the candle. if it gets confirmed it stays completely

[feral lava]

right click and disable values and such

[feral lava]

!confirmed

[jaunty perch]

A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.

Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".

[cunning goblet]

Thanks

[keen gyro]

I don't have the stock live bot scanner? Is there anything you can do?

[shy relic]

see here #🔔scanners-premium 🙂

[keen gyro]

Boooooom, Got the live bot stock scanner signals. Thanks Lux.

Shout out to the homie Elias Habibi. This guy promoting LUX ALGO to our stock group. He praises LUX lol 😆

[stone plover]

this would be huge!

[quaint prawn]

Can you pin me and quan strat

[stone plover]

yes ^

needs the credit it deserves

how are you making the scripts? does it need coding experience or easy to make?

[pallid thunder]

lol forsure

[restive tulip]

stil not able to add lux algo to my trading view chart after joining accounts

[thorny ermine]

Hey guys

what is your signals sensitivity?

[feral lava]

try refreshing & make sure you entered the correct username

!settings

[jaunty perch]

Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings

[feral lava]

@thorny ermine ^

[timber ocean]

Guys, I want to send me an alert Pivot Based Trailing How? Pls Help I want Settings

[inland wasp]

hi, I am new here. where do I view/adjust Sensitivity/Agility

[shy relic]

Hi 🙂 You can obtain optimal signal settings in the optibot channels, see #800747939226976266 for the 5min tf, to learn more abt settings see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings

[inland wasp]

👍

[trail mortar]

@vale salmon I dont see the lux under the drop down in TV alert tab? does alerts work by only checking the check boxes in the indicator?

[thorny ermine]

thanks

[viscid rampart]

My Lux Algo Premium is grayed out in TradingView and as such, I am not able to set an alert on it. However, on the Lux Algo Oscillators Premium, I will be able to set an alert. Any suggestions on how to fix this issue?

[shy relic]

refreshing often works 🙂

[viscid rampart]

I will try that and see if it fixes the issue. Thanks AlexGrover!

[cinder mango]

Hi this is ashwin

Admin, i have purchased the lux algo montly subscription and i am seeing only USA stocks in market scanner. I need NSE india stocks to appear

Please help

#🤝support #🤝support message

#🤝support Hi this is ashwin
Admin, i have purchased the lux algo montly subscription and i am seeing only USA stocks in market scanner. I need NSE india stocks to appear
Please help

[indigo cradle]

Hi there; you cannot filter in discord sadly

You'd need to set your own alerts on TradingView

[cinder mango]

ok

[eager cypress]

hello! quick question, how can I set an alert for neo or eq cloud crossover?

[indigo cradle]

You'd select Neo Lead Crossing Neo Lag

[eager cypress]

Thank you for the clarification!

[wanton fable]

@indigo cradle how do I set alert for UMACD ?

[indigo cradle]

An alert for what?

[wanton fable]

When the lines crosses over

down or up trend

[wanton fable]

this is when red candles shows up ?

[indigo cradle]

Nope

This is for whenever it crosses

[wanton fable]

ok.

Does Oscillator have other alerts apart from this ?

[indigo cradle]

You can alert for anything

You just need to create it

https://youtu.be/Im_GRDSVfXk

[wanton fable]

Thanks will check it out

I want to create alert whenever the line is above the zone, goes below the zone and when it crosses over one another. How do I proceed.

[indigo cradle]

So the second wave?

[wanton fable]

Yes

[indigo cradle]

Ah that ain't possible sadly

Also logically fails a bit

Because technically every single wave is a second wave

Or has a "parent" wave

[wanton fable]

Ah okay

[floral fog]

Hi, I just subscribed to Lux algo. Wondering if there are vidoes on how to use the indicator to plan entry and exits. thanks

[indigo cradle]

Welcome 🤝

!docs

[jaunty perch]

Learn about every aspect of Lux Algo at: https://docs.luxalgo.com

[indigo cradle]

Full docs

!strategies

[jaunty perch]

Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr

[indigo cradle]

And full strategy playlist 😎

[floral fog]

thanks

[cosmic monolith]

Hello

[indigo cradle]

GM

[crimson fable]

Tell me, under what technical conditions does the gradient begin to change color to purple?

[indigo cradle]

Technical conditions?

It would just be a more ranging market

Or retracement

[tough turret]

how to create alret but and sell for BTC & eth 15 min ?

[formal ermine]

Hello, is it possible to change the color of the advanced histogram becuase it is a little hard to identify wether it is a dark blue or a light blue in these areas

[nocturne rune]

That's a major point. If you grab the signal as soon as it appears in the candle, there may be a reversal and the signal will be repainted. If you grab the signal AFTER the candle is closed, there is no repaint, but you may have lost the trend. That's what I am experiencing. Anyone else with a different experience on WHEN you should enter the trade? During the candle? After the candle is closed?

[indigo cradle]

!alerts

[jaunty perch]

How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview

[crimson fable]

OMG! How it works? Why is there such a big difference? My bot doesn't know how to react to this

[indigo cradle]

Currently not sadly 😦 We will try to bring back. custom settings

[indigo cradle]

You shouldn't really use signals for entries at all in general. They are just there for trend identification

[indigo cradle]

I would assume you should believe the alert values

[crimson fable]

It conveys values, past levels

[indigo cradle]

ahhhh it's not getting the most recent values?

[crimson fable]

Yes, it doesn't always happen, but it does happen. And I have restrictions on opening a deal if the price is at certain levels.

it's ok

Wow! Now the indicator has changed, it has transmitted values, 3 bars earlier! How the indicator began to change -_-

[pine temple]

Please could someone share best tactics to filter buy and sell signals(strong and regular one)? Or I should use different approaches and use signals from oscillator or pattern indicators? Thank you in advance.

[eager cypress]

Hello, quick question! is there a shortcut to setting up an alert (e.g. any confirmation signals) and applying it to all the selected pairs instead of doing it one by one?

[ancient oriole]

@indigo cradle can u do a pinned one, where people can finde any explanation about alerts? 😄 Everyday 10 people are asking about alerts haha

[indigo cradle]

You've seen my videos?

[indigo cradle]

It's allllll in our docs 😎

Even if I pinned it I promise I'd still get 1000s

[eager cypress]

I couldn't find the answer to this one sadly 😢

[ancient oriole]

true - maybe they just turn on their brain haha

[eager cypress]

what's wrong with asking a question that I am not entirely sure though?

[ancient oriole]

nothing against u mate 🙂

[eager cypress]

ah okay 🙏

[pine temple]

@indigo cradle which one? I saw some but not detailed explanation

[indigo cradle]

You'd need to set the alerts one by one sadly

[indigo cradle]

Which ones did you see? 👍

[ancient oriole]

u can right click on your chart and set an allert

https://docs.luxalgo.com/getting-started/setup-tradingview/

[eager cypress]

Thanks, but I know how to set up the alerts. I asked Gecko if I could set up an alert in a way where I can apply it to all the selected instruments instead of doing it one by one (I have about 150 alerts so haha)

[ancient oriole]

wtf 150 alerts haha-

[forest delta]

Hi, can I know which are the best setting for the ultimate rsi for 15 mns chart? Currently those are my setting

[formal ermine]

Hello, if i buy lifetime what will happen to my current membership ?

[indigo cradle]

It will be stopped 👍

!upgrade

[jaunty perch]

You can upgrade your subscription by logging in to your customer account at: https://luxalgo.chargebeeportal.com/

Once logged in, click your account, click on your membership, and select 'Edit Subscription'.

From here you can select your upgraded plan of choice from the blue drop down menu, see the prorated charge, and click 'Update Subscription' to complete the process.

[indigo cradle]

If you upgrade via this link it'll be prorated

And stop your current

[formal ermine]

thank you

[tiny stratus]

In the v5.1 update will they include a bug fix in the Lux Algo 5.0.1. { When setting the style for the trend tracer it defaults back when setting the autopilot! }

[shy relic]

the next updates includes many internal changes on how the indicator is compiled/executed, we have been trying to fix this style bug, however we could not find a cause and it seems it can't be fixed at the moment.

[tough turret]

when new update will be released ?

[shy relic]

very soon, maybe next week 👀 The internal changes have taken some time to adjust and should hopefully provide a smoother experience.

[tough turret]

I am really disappointed from this indicator I need perfect setting gives me wrong signal all times

[shy relic]

just check the optibot channels to get optimal settings, we also have more features, dont rely on the signals alone, see our docs to learn more about it https://docs.luxalgo.com 🙂

[eager cypress]

will the alert system be included in this new update?

[jade yacht]

What time frames are you using?

[tough turret]

10 & 15 min bro

[sullen peak]

Hello, I have enable future scanner, But lots of this coins is not in binance, what exchange is the default?

[pine temple]

What is future scanner?

[hollow burrow]

HI

I JUST JOINED AND NEED SOME HELP PLS

[indigo cradle]

HELLO THERE

WELCOME

how can I help?

[crimson fable]

Why is Ranges so wrong? At 6:30 pm my time. There was a first notification that the levels were higher. (visually it was not displayed in any way) then the price began to fall. But the indicator believes that the levels are still high. $100 difference! This breaks all strategies for work .... is it possible to check this somehow? Why visually plot shows one, but in fact the value is different? (actual value is not correct!) It seems to freeze...

[hollow burrow]

i just added the indicators and need assistance setting them up

[indigo cradle]

We are checking this; it's odd

You selected once per bar close?

[hollow burrow]

i played around with the settings but i am not getting the same signals as the live stream u have for both BTC and ETH

[indigo cradle]

See stream description for settings used 🙂

[crimson fable]

Yes, I made a condition under which simple every 5 minutes, I send myself the Ranges state

[hollow burrow]

wr can i see that as i do not see anything on the stream page?

[indigo cradle]

That's a weird alert though

[ocean talon]

Once bar close - won’t tell you until timeframes complete then alert it kinda late

[crimson fable]

I add all the indicators to the database, then I process them and, based on them, I open a deal.

[indigo cradle]

Youtube 🙂

[indigo cradle]

I see I see

So it's just the ranges that alerts are being bad with??

[ocean talon]

My opinion “once per bar” it better because it will open new bar and alert early same time

[hollow burrow]

went on youtube stream and found nothing that mentions the settings used

[pine temple]

Can someone explain how to use luxbot? How to use those test images?

[jaunty perch]

@indigo cradle

LuxBot

`/sentiment symbol *timeframe`

Returns the technical analysis sentiment of a given symbol and optional timeframe. If the user don't specify a timeframe or one that isn't supported the 15 minutes timeframe will be used.

See here for more information.

/sentiment btcusd 15

Made with ❤ by LuxAlgo.com

[pine temple]

/sentiment btcusd 15 where to use that command?

[pine temple]

luxbot showing buy for LTCUSDT and I receive on #altcoin channel LTCUSD 📉 SELL Signal (2H Chart)?

[austere falcon]

Hey there. I have question. I setup everything totally same as on YouTube stream, but with same setting i do not see actual strong buy signal on btc

Other signals are same positioning

Agility, sensitivity, ticker exchange all is set the same

Btc and eth same.. some signals on stream are missing anyhow i have totally same settings

[feral lava]

The 2nd chart you are showing is ETH and the first one on your phone is BTC

[austere falcon]

Yes,right

I marked exactly what is missing

Signals are different

[feral lava]

here is Bitcoin

[feral lava]

here is Ethereum

so they will be different

if you change on your phone to ETHUSDT Binance, they will be the same w/ the same settings on 🙂

[austere falcon]

First 2 pictures are Bitcoin.. second 2 pictures are eth

[feral lava]

ohhhh ok gotcha

are you on Binance data?

BTCUSDT: Binance

[austere falcon]

Yeah

I spent 1 hour with settings

Everything IS same

Btc usdt (tether us) binance 15min, agility 32, sensitivity 6, confirm+exits, gradient candles

And now i lost strong buy, it comes too late

Now is same

Agility

32/26

?

[feral lava]

i just noticed it was on 6/26 @austere falcon must've changed when we updated it, thanks for pointing it out

i've updated the stream now to 6/32

it's the same now

let me make sure all servers are updated so it displays 100%

[austere falcon]

I think 6/26 was better signal😉

2 candles earlier

Okay thanks

[lunar fern]

@feral lava I think this is a simple question. I think it's more about TradingView than LUX, but perhaps you can help me. Why is this number here in USD not in ETH? I tried changing it to show ETH current market price. What am I doing wrong?

[hollow burrow]

so is it 6/26 or what???

[austere falcon]

Latest strong buy on 6/26 is 2 candles earlier.. on 6/32 is on Big candle. Its up to you

But it was mystery

[feral lava]

market cap will always be in USD

[feral lava]

6/32 for live stream

[austere falcon]

Okay

Thanks

Nice days

[feral lava]

it'll always vary, we'll just keep it on 6/32 for consistency purposes for the stream 🙂

[austere falcon]

Yeah

[hollow burrow]

i put my btc/usdt on 6/26 and i do not see a strong buy on the 15 minutes?

[austere falcon]

Binance exchange!

[hollow burrow]

yes

[hollow burrow]

got it now

my connection was stuck

[austere falcon]

This is 6/26 on bybit

[hollow burrow]

thnx

[sullen peak]

Is bybit better then binance?

[hollow burrow]

i am on binance and FTX only

[sullen peak]

Sorry, my bad

[hollow burrow]

np

[twin cosmos]

hello everyone, is it possible for the team to add ZIL / BUSD to optibot15m ? I may be the newest member here, sorry if this was an unappropriate question

[shy relic]

Its a totally fine question 🙂 We tend to add major cryptos first, but we can think about adding ZIL in the future, in the mean time you can use the recommended sensitivity in the dashboard

[frozen glacier]

Hi! Everyone. I am noob here and want to ask about tp/sl. What do recommend setting for tp/sl. There is 1 to 10 lever. I have no clue..please help! Thank you!

[indigo cradle]

It really is a person thing it's hard to say; but 5 is a nice middle ground

[frozen glacier]

Ok thank you!! Good to know!! 👍

[meager crescent]

Hello

Im not able to connect my discord to lux algo . It is showing email is alredy taken

[indigo cradle]

You've already done it

You're already in VIP

[tribal thistle]

Hi, Lux algo premium works on the Renko chart??

[indigo cradle]

At the end of the day they are a collection of indicators so can be applied to any data really 🙂

[tribal thistle]

Ok, Thanks.

[slender ocean]

Hi

I wonder
this plot name

Arrow plot name TT

Sell arrow
Buy arrow
Strong buy arrow
Strong sell arrow......

Like this

[indigo cradle]

!placeholders

[night beacon]

Placeholders For TradingView are shown below:

Placeholders for TradingView

"ticker":"{{ticker}}"
"exchange":"{{exchange}}"
"interval":"{{interval}}"
"timenow":"{{timenow}}"
"buy":"{{plot("Buy")}}"
"strong_buy":"{{plot("Strong Buy")}}"
"sell":"{{plot("Sell")}}"
"strong_sell":"{{plot("Strong Sell")}}"
"exit_buy":"{{plot("Exit Buy")}}"
"exit_sell":"{{plot("Exit Sell")}}"

These can be used in the message field of TradingView however cannot be used in all in one alerts.

[slender ocean]

No arrows plot?T^T

[indigo cradle]

Those are the plots above 👍

[slender ocean]

Okay Thank you~^^

[twin cosmos]

hello again,

as a lux algo newbie, i would like to ask if there is a checklist-like we need to do before fully understanding how this alerts work?, as a free user of trading view, i can only place a single alert for just only buy or just only sell ? is there a way for to be alerted for anything that comes out as alert from lux ?

[indigo cradle]

As a free user of TV yep you get a single alert. This can be any alert; you could use the all in one alerts:

https://www.youtube.com/watch?v=E2Bb0ly2hEw&t=7s

[twin cosmos]

thank you so much 🙂

[sand jay]

Hello i need help with setting up and alert for polynomial regression extrapolation, alert when green and when red, is green > 0 and red < 0?

[indigo cradle]

Sadly this isn't possible

[sand jay]

uff

[sand jay]

Any alternative for that? or smth :/

[indigo cradle]

Sadly not really 😦

[worn void]

Hi. On the ultimate RSI, What do the different colour lines mean? They give 2 readings. How am i meant to read these. If one crosses the other is that significant? What’s the best way to read it? Thank you

[indigo cradle]

Purple is main uRSI plot

That is the main metric

The yellow is the signals line

A crossover between the two can signal a trend change 🙂

[worn void]

What does the signals line mean please? What’s it’s purpose?

[distant cargo]

anyone knows what are the Time showing in the BOT SCANNERS ?

[indigo cradle]

To be used with crossovers

Or as a less noisy smoothed plot

[indigo cradle]

What time?

[distant cargo]

The time showing when you click on any of the LIVE SCANNERS (EXCHANGE OR LOCAL)

[tough turret]

How i change RSI
??!!

[indigo cradle]

Change RSI?

What do you mean?

[indigo cradle]

That's your time

[distant cargo]

👍

[vale urchin]

Hi, How to change candle color with purple?

[tough turret]

I want to change RSI colour

[indigo cradle]

Zoom in 😉

[indigo cradle]

This you cannot do sadly

[tough turret]

I hope you add it in coming update

[vale urchin]

Why in videos candle color is so clear even not zoom in

[raven mist]

disable borders for candles

right click chart>settings>symbol>tick borders. also make sure in lux settings to set candle coloring to simple

[vale urchin]

Now its better. Thanks bro

[pine temple]

That is not working I have tested

What is plots for TP1 TP2 SL1 SL2 I tried as per documentation but not sending data only name of plot

[indigo cradle]

On TV if you click data window

You see a list of plots

[pine temple]

But I cannot send to discord plot by name because of quote. Can you share plot number for TP1 TP2 SL1 SL2 please?

{
"embeds": [{
"description": "{{ticker}} 📈 ENTRY LONG Signal {{plot("TP2"}} (1h Chart)",
"color": 1175651
}]
}

I'm geting this in discord:

DOTUSDT ENTRY LONG Signal {{plot("TP2"}} (1h Chart)

[indigo cradle]

The plot values may be getting messed up again

Let me see

[pine temple]

Thank you

or you have advise when I use {{plot("TP2"}} it is working but has problem because of quotes

[indigo cradle]

For now only Tp1 and SL1 can be accessed due to limits

[pine temple]

That is not help 😦

{
"embeds": [{
"description": "{{ticker}} ENTRY LONG Signal {{plot(\"TP2\"}} (1h Chart)",
"color": 1175651
}]
}

I tried that from above but not forking because I have double quotes inside quotes. Can you help to format text?

[indigo cradle]

For now only Tp1 and SL1 can be accessed due to limits

Tp2 not touchable

[pine temple]

TP1 is okay value but SL1 sending value of TP2

[pine temple]

How I can fix this?

[indigo cradle]

Fix which thing?

[pine temple]

TP1 showing value of TP1 but SL1 showing value of TP2 instead value of SL1. Check the image from above

And how to fix decimals. I want less decimals when I'm sending message alerts from tv to discord

[pine temple]

I switched arrows but you will get point

[indigo cradle]

will be patched this week sir

[pine temple]

Will you inform me when you do that ?

[indigo cradle]

Next update will have that solved

[twin cosmos]

sorry for asking silly questions again, when it says strong buy, what it means ? should we enter with market option example for in binance ?

[shy relic]

A strong buy occurs when the signal is in accordance with a pre established trend, as such it indicates a confirmed uptrend 🙂

[twin cosmos]

so it means that, it doesn't matter where we enter within that candle ? am i right ?

[shy relic]

if you enter a position from signals it should be at candle close, always, thats where a signal is confirmed 🙂

[twin cosmos]

thank you alex, startex lux today, sorry if i bothered you, still learning

[shy relic]

no problem at all 🙂 I am here to help, you can also see the docs for more information https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals

[civic plank]

Hello

I want to add alert for mana/usdt

To check anyconfirmation once per bar close or only once?

[indigo cradle]

Once per bar close ideally 🙂

[civic plank]

Okay and set it on any confirmation?

[indigo cradle]

Yep if you want any signal alerted

[civic plank]

Okay

Thanks

I got this message

I only checked this

[calm wagon]

Hey - how do I set alerts to get ST and PT values as well? Here are my current settings

and when setting the alerts, I didn't see any option to select 'once every bar close' - what am I missing

[civic plank]

Uncheck open ended and you will see

[austere patio]

hello

i wanto ask about scalping profile

i chose it but how can i set two other ındctaor settıngs ? to check everythimg ok

i chose scalping signal + auto signal + contrarian gradiendt + short term

[static spoke]

you basically chose a mixed salad..?

[austere patio]

bot how can we choose @feral lava

[austere patio]

i try to figure out how

2 week pass not any strategy

if possible looking for a scalping

[static spoke]

you should learn how luxalgo works, they have a lot of tutorials

[austere patio]

i read , i watch videos but not working for me so far

[static spoke]

timeframe of the graph?

[austere patio]

1m but ı just try to scalping 5m or 15m

[static spoke]

5min is not for scalping imo

1min at maximum

[austere patio]

1M my graph but what is the other settings ??

sr

ı use hekien ashi cande

@vale salmon @worldly cliff how can we cross thıs two places in alert ?

with strong signals

@feral lava any alert settings ?

[thorny ermine]

Hello guys

where can i find the agility in MTS?

i just found this numbers in optibot

[civic plank]

I have a question. Scanner sent at 8pm ltc strong buy signal, but i look on chart, strong buy was on 14pm

Whats wrong with scanner

[west root]

Saw this vid. What timeframe is recommended for this? Also, this is similar to Gecko's strategy using predictive ranges 2 and UMACD but using predictive channels 2 and Neo Cloud. Which is more effective? https://youtube.com/shorts/eG27q1H3xAs

[waxen inlet]

hello @indigo cradle @shy relic when i choose preset i got a real good chart.... but i want to change some settings.... but i dont know what are the preset settings so i ca replicate it anf change manuually the sensitivy and the confirmation settings... its possible when we select some preset that in the both fields the values are filled?

[shy relic]

any tf can be used 🙂 We tend to recommend using larger timeframes like 15+min

[shy relic]

when it comes to settings presets can enable autopilot (see on the dashboard), while certain presets will simply use the current user sensitivity/agility values. See https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/#presets for more info

[waxen inlet]

how can i know the settings of a preset? so i can replicate and change a little bit?

i like what tha preset signals look like, but i want to change a little the sensitivity

but when i select the preset.. the sensitivity values doesnt change....

[shy relic]

then it means that the preset is using autopilot

[waxen inlet]

how can i replicate the results of a preset?

[shy relic]

See the link above, it tells you what features the preset enable

[waxen inlet]

ok...but i want to know what are the settings of the seneitivity and %

i need to manually replicate the results of a preset, so i can adjust the sensitivity

[shy relic]

Some presets makes use of autopilot, when autopilot is enabled you cant change the sensitivity setting, the autopilot frequency is highlighted in the docs (Mid-Term, Low), when a preset does not make use of autopilot it will use the user set settings.

Which preset are you using?

[waxen inlet]

Ok i understand that... i just want to know what sensitivity and % values the presets have... so i can manually replicate it

[indigo cradle]

But the presets use autopilot

No sensitivity or agility

[calm wagon]

I did try unchecking open ended but still don't see those options

at @indigo cradle @shy relic can you guys please help me with setting up the alerts. I don't see the option to select 'once every bar close' when I set the alerts (see screenshot below) and what should I include in the message to get SL and TP1 and TP2 sent in an alert as well

[indigo cradle]

The any alert() uses that by default

and tp2 isn't avail as a plot

Only TP1

and you cannot use any alert() if you want that sent in the alert

you'd need to use any confirmation

or a built in alert

[calm wagon]

Right so I can only generate SL1/TP1 if I individually set alerts for each confirmation?

With any alert function, it will only say what was the underlying signal that triggered the alert

[indigo cradle]

Correct yep

[indigo cradle]

Yep for any alert only the signal itself

[waxen inlet]

Guys.. the indicator trendline with brakes repaints?

[indigo cradle]

It can indeed 👍

[waxen inlet]

But why? The lux indicators should not repaint right?

[indigo cradle]

Which indicators?

[waxen inlet]

Trendline with brakes... isnt yours?

[indigo cradle]

It is indeed

[waxen inlet]

But i think none of your indicator repaints

Can u double check please?

[indigo cradle]

Indeed; premium ones do not repaint

What do you need me to check?

[waxen inlet]

If the signals of this indocator repaints or not

[indigo cradle]

Which one?

Premium?

Or Trendlines with breaks?

[waxen inlet]

Trendline with breaks

[frigid yarrow]

Can you suggest best Indicator(s) and the settings (including Time Frame to use) for quick scalping ES? There are so many settings on the three premium indicators not sure what to use when. I like to scalp reversals and breakouts even on very low Timeframes.

[waxen inlet]

This one

[indigo cradle]

But I just said it does repaint 🙂

[waxen inlet]

😩

[waxen inlet]

Can u guys fix this? To not repaint?

[indigo cradle]

It's not broken but trendlines change over time

It's designed like this. It won't repaint a lot 🙂

[indigo cradle]

Have you seen my latest video? 🙂

[frigid yarrow]

This reminds me "Trading is a hard way to make an easy living". We all need that one indicator to solve all our problems.

[frigid yarrow]

I have seen many videos, will look on youtube for the latest one.

[indigo cradle]

GeckoTrading 😉

My latest video

Scalping

Can be used on any asset really

[mental folio]

Is there a way in Algo to show volume?

[indigo cradle]

You could use the lux profile

[mental folio]

Thanks as always

[hexed palm]

Hello, this indicator is not working to much good 😕. Yo have a page to calibrated the indicator please. For more precision. I loos to much money in this 2 days

[indigo cradle]

You are looking for settings?

What have you been using

or trading

[hexed palm]

5 min

[indigo cradle]

1. That's not a good timeframe for a newer / struggling trader

That's el first mistake here

[hexed palm]

And what time you recommend?

[indigo cradle]

15m+

anything 15m or above

[hexed palm]

I work 5 minutes all time. And I use indicator to Nexxon and is working good. But this is premium indicator and is the same to Nexxon. And Nexxon is free

But ok thanks I check 15 minutes to do trading

[indigo cradle]

😳

!docs

[jaunty perch]

Learn about every aspect of Lux Algo at: https://docs.luxalgo.com

[indigo cradle]

I would massively massively suggest going through our docs to see what indicators you have access to

Because by the sounds of it you must be not opening the settings menu or using other toolkits?

!strategies

[jaunty perch]

Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr

[indigo cradle]

And here are some example strats 🙂

[hexed palm]

Ok thx I check and I let you know. Have a good day

[indigo cradle]

@heady pagoda Dmd to assist

*sent friend req

[forest delta]

Hi, can someone explain which one is the main support and resistance using the S&R indicator ad seen on the picture?, I got different ranges here

[indigo cradle]

What exactly do you mean by "the main"?

[forest delta]

In the attached picture there are several support and resistance, which one is the one that I need to follow based on precious lows?

[trail mortar]

you have a new video on scalping? Im 95% scalping

[indigo cradle]

Well; all of them are technically SRs

What do you mean by follow?

It depends how you're using them

[indigo cradle]

You are?

[forest delta]

Different time frames shows different S&R

[indigo cradle]

Indeed

[trail mortar]

S& R by ranges are quite accurate in finding levels, but when it comes to real-time trading they just increase anxiety and limit profits

[forest delta]

That's why I'm confused which to follow

[trail mortar]

the best is use nicely calibrated exponentials

[indigo cradle]

You follow the ones of the timeframe you trade

[trail mortar]

they work better than ranges for me at least

the reversal zone is also useful

[forest delta]

Yes but sometimes I place my TP on the next resistance and it falls below it always

[trail mortar]

what i meant was i'm mostly in to scalping

[forest delta]

Where can I adjust these settings?

[trail mortar]

in the lux algo premium S&R section

[trail mortar]

Under predictive S&R

choose exponentials then fine tune the drop down number till you find appropriately matching S&R zones

[trail mortar]

in past price action, you will figure out which number the that would draw exponential lines that would closely go with the strong price points, this infact is one of the best things in Lux systems

I m new to lux systems too, just two days. but the system is quite powerful i should say, this is my first paid indicator as well

[forest delta]

OK thanks bro

[trail mortar]

Nop

[cosmic imp]

Is it so that Ultimate Stockastic is better to be used in ranging markets, compared to ultimate RSI?

[nocturne rune]

QUICK QUESTION: I was seeing the alerts on Lux Algo and we have, for example, CONFIRMATION BUY, CONFIRMATION STRONG BUY, and CONTRARIAN BUY. If I want to catch ANY of these BUY signals, what alert should I use? ANY CONFIRMATION BUY? Please look at the situation in the attached image. Any help is appreciated.

[indigo cradle]

Confirmation buys there

[nocturne rune]

yes, the alert is set to get ANY CONFIRMATION BUYS, so, I wonder why there was no alert. Any ideas?

Guys, another question... a very frustrating one to be honest. I am testing some positions to ONLY get STRONG signals. The STRONG signals are supposed to get a market trend. And I always get it once the candle closes, as recommended. But I am seeing many situations like the one in the attached image. I get a STRONG signal, I enter the position on the NEXT candle and the market reverses making me be stopped. Any ideas on how to prevent that, please?

[indigo cradle]

One of the most important things you can do is NOT use signals for entries

they are not designed for entries

They are just there to label a trend

(try remake the alert)

[deep dock]

💯 💪 👍

This should be "pinned" 💎

[indigo cradle]

we put in big red boxes in our docs too 😉

[nocturne rune]

So, basically what you are saying is: don't trust the signals, right? How can we be certain about when to enter a trade?

[indigo cradle]

It's not "do not trust"

It's "understand their purpose and how they function"

They are there to identify a trend

but they are trend based

So they only appear once a trend has changed

Therefore it's in their nature to not be good entries because they appear after the trend has changed/ started to change

It's the traders job (as shown in some of my videos) to use these signals, to help you spot a trend and trade in between that trend with preditive features; take the uMACD)

[hollow burrow]

if we choose the scalper preset, can we enter upon signals? and if yes, what time frames are considdered for scalping preset? and do we use autopilot? or no?

[indigo cradle]

No no

Please avoid using signals as entries

You can

[hollow burrow]

ok but how to use the scalper preset

[indigo cradle]

But we recommend against

[indigo cradle]

Just how you'd use the features normally 🙂

It just turns on features we feel are useful for scalpers

As the scalper that is mainly down to you

[hollow burrow]

the features i use are not LUX algo, i am new and thus asking u pls how ur scalping preset works

[indigo cradle]

I do not understand 😦 You're asking what exactly? What are the features enabled in scalper mode?

[nocturne rune]

I've watched multiple of your videos. Thank you for making them. But you know, I like to sleep and I have a life other than trading. Most of the strategies I've seen online, including some on your videos demand a long time in front of the computer. Which is fine. But I was thinking that by paying for lux algo signals I would be able to reduce my time in front of the computer, you know

[hollow burrow]

i can see the features but how to use ur algo to better scalp if i should not consider the BUY and SELL as indicators?

[indigo cradle]

And that is what they can do; and are designed for; nice alerts when a trend changes 🙂

[indigo cradle]

You have seen any of my videos?

[hollow burrow]

yes but nothing on scalping, can u kindly send me the link

[indigo cradle]

Set an alert on confirmation signals; get alerts to your phone. When the trend changes whip it out; analyse a chart for a few minutes; decide what to do and enter trade

[indigo cradle]

https://www.youtube.com/watch?v=GETZTJqxZfU

But as you'll see I warn against this

For most

[nocturne rune]

That's not what I've seen my friend. I'm kind of frustrated with the signals

[shy relic]

adjusting signal settings can help a lot here 🙂 Optibot remove most of the hassle

[nocturne rune]

Optibot means I have to adjust the settings and remake the alerts daily, right?

[hollow burrow]

Very clear thank you, and very informative

[shy relic]

yes, if this is not good you can eventually use autopilot, this will greatly reduce interactions with the indicators/alerts, but in trading there is nothing such as "set and forget" 🙂

[hollow burrow]

One last question, the agility settings for the video u sent is how much pls? signal agility %

[nocturne rune]

Do I have to recreate the alerts by using autopilot?

[shy relic]

no, no need to update it, autopilot directly adjust the signal general algorithm based on market dynamics 🙂

[nocturne rune]

I'm going to give it a try. Thank you

[proud crescent]

Hello, I just subscribed and purchased Lux algo premium.
So I want to know if the setup is already completed.

[indigo cradle]

Welcome 🙂

I see you've loaded Lux Algo Premium there

If you're just wanting confirmation signals you're all good 🙂

[proud crescent]

Oh, thank you.
Does that mean now is the time to buy?

[shy relic]

it can indeed be indicative of the start of an uptrend, and as such an opportunity to buy, other features can be used to confirm a decision, such as a strong signal being active 🙂

[proud crescent]

Wow, Thank you for advice me.
And I would like to know that which is support chat group for begginer, here?

[pine temple]

You can buy QuickAlert plugin for tv. It's take couple minutes daly to export update and import more than 100 alerts. I made my script to update sensitivity and agility from optibot automatically. So for me take me daly couple of minutes. But still you need to filter signals once when you receive alerts.

[proud crescent]

oh, how can I buy.
Sorry I just started to crypto trade...

[pine temple]

I don't know if I can post link here. If admin allow me I will post link

[proud crescent]

Okay, I will try to find it.
Thank you for advice to me.

[hollow burrow]

i no longer can find the option to use the taki ashi candles in the updated LUX algo, can u assist how to find and use them? @indigo cradle

[trail mortar]

Hi how may we get taki ashi candles?

[ancient oriole]

change your candles? 😄

[trail mortar]

nop i saw it in a lux algo tutorials

[hollow burrow]

me too but cannot find it in the algo

[ancient oriole]

it is LUX 4.4 - they might got removed - @indigo cradle ?

[trail mortar]

yep @indigo cradle any idea?

[hollow burrow]

@indigo cradle how do you set the breakout tp and sl on the 5 minute time frame coz i watched ur video and does not mention when to exit a trade?

[crimson fable]

Dear developers!
I beg you, in a future update, the ability to create an alert for a possible trend change (when a purple bar appears), this will reduce the huge number of losing trades, thank you!

[feral lava]

Thank you for suggestion @crimson fable i’ll make sure devs see!

[sullen tree]

hello someone help me i have 2000usdt in future when i tranfer more 100 then show me this message (Transfer amount exceeds available balance) and i can not transfer more

[sudden fjord]

HI, Have you considered learning a swing trade strategy? It trades on the higher timeframes such as 4h & 1D. Lux has a swing trading feature.

[deep dock]

You may want to ask to your crypto exchange support chat.

[jaunty perch]

Hey @indigo cradle

I just added my username to the page

But it is still locked in my tradingview

Can you help?

My username is leanderdecaluwe

Or @vale salmon

[indigo cradle]

Give it 5m 🙂

Remove and re-add

[lucid portal]

hey support team i am getting an internal server study error

any one else knows how to fix it?

[indigo cradle]

Which features are you using?

[lucid portal]

lux algo premium 5.0.1

[indigo cradle]

But which features or settings have you changed?

[lucid portal]

nothing

not a single setting. i use all defaults

[indigo cradle]

does this happen on other timeframes?

[lucid portal]

no only on the 5 min

is it because of autopilot ?

yes I added autopilot on few hours ago

yup thanks. disabled autopilot and enabled it again. issue fixed.

#issuefixed

[indigo cradle]

😄

[exotic zinc]

Hi Sir, I am using free trading view ......alert created one stock

How to cancel those stock and create alert for another one

[nocturne rune]

Not yet but thanks for the suggestion. I need to know that Lux Algo's signals are trustworthy first. I believe the strategy (scalper, swing trade, etc) for now is irrelevant. I need to check if Lux Algo is consistent. Unhappily for me it's not consistent, yet. Back testing any strategy works wonders but when you actually put your money on a new trade, that's when you see the real deal. For now, I'm not satisfied with Lux Algo, yet. Unhappily.

[fossil thorn]

Hey I just purchased premium LuxAlgo… when I use the the premium indicator on tradingview and it says buy/sell do those pop up real time or only after the breakouts?

[cunning heart]

For the best results try to use optibot settings

[indigo cradle]

Those are realtime 🙂

[cunning heart]

This is also historically the most bearish I’ve ever seen a market and most rallies have been fake-outs. You need to do some actual technical analysis and use lux algo as confirmation

[fossil thorn]

So if there is a direction Luxalgo will have a buy or sell pop up on my screen?

[indigo cradle]

It will do 🙂 but of course don't follow them blindly 😉

[fossil thorn]

For sure thank you!

[nocturne rune]

Thanks for the clarification, brother... however, if the market is trading, I don't need Lux Algo. There are hundreds of strategies and free indicators that have a high accuracy when the market is trending. I am paying Lux Algo SPECIFICALLY for this moment since I want to find if it can provide reliable signals even when the market is not trending. So far, I am disappointed by the results. Unhappily.

[lucid portal]

whats the timeframe you are trading ?

[indigo cradle]

If that's the case you don't want to use confirmation signals

You'll want contrarians

Those are built in for NOT trending markets

(ranging)

• pair that with reversal zones

and bingo

[nocturne rune]

I am going to give it a try, Thank you so much. I will update the results here later on.

[sand jay]

Hello, any alternative indicator for polynomial regression extrapolation?

[indigo cradle]

An alternative to do what? 🙂

[cunning heart]

I guess can’t make everyone happy

[nocturne rune]

If anyone happy?

[cunning heart]

I’m happy

[nocturne rune]

Good for you

[cunning heart]

The community figures out strategies that pay for this algo

The strategies use the algo and they work

[nocturne rune]

I'm still trying to find a reliable one. I posted multiple situations here on this very discord

[cunning heart]

Look for @keen warren

In stocks

He has a good strategy

Many people use it

Nothing will be 100% but there will be good win loss ratios

[calm wagon]

@indigo cradle Is there a way to filter out the noise/ false signals in a ranging market such as Gold

the algo triggers a lot of false signals in ranging market and not sure how I optimise it

[pine temple]

How to use live bot crypto scanner signals? Every signal which I tried last past week was lose one 😦

Am I doing something wrong?

[indigo cradle]

I would suggest avoiding the ranging market all together; watch trend strength in the dashboard 🙂

[indigo cradle]

Indeed; they are more a "hey check this asset out, open the chart see what you think, do some analysis go to a lower timeframe and find an entry if you like"

They are not a "QUICK BUY"

[keen warren]

easily 50% profit in 20 minutes of trading

[calm wagon]

thanks - what strength % is a good measure to go by?

[pine temple]

I thought when join here will be much easier to win some trades. Free indicator also showing buy and sell signals and than do some analysis. What is better in premium indicator from free indicator? @indigo cradle

[fringe terrace]

I'm receiving an error with Lux Algo Premium (5.0.1) when using through the standalone Trading View Application (1.0.11) on my Mac. The error generated is: Study Error (internal study error). I signed in and out of the app and also checked for updates as well as re-installed the Lux indicators. I'm not having any issues through my browser, but thought I'd post here just in case anyone else is having the same problem. Thanks for the kind help! I'm new to the world of Lux, but really enjoying the view so far.

[pine temple]

What is strategies etc.? please can you share?

[keen warren]

i trade stock options in the US

#📈stocks-futures-chat message

[pine temple]

Thank you

[pine temple]

That strategies is not for crypto?

[keen warren]

no

[pine temple]

Can someone share good strategy to start with?

[shy relic]

you can find some here https://docs.luxalgo.com/getting-started/popular-strategies/ 🙂

[indigo cradle]

Over 50 🙂

[indigo cradle]

This should be patched next week 🙂

And amazing to hear 😄

[nocturne rune]

would you mind sharing what is this strategy and settings, please?

[keen warren]

#📈stocks-futures-chat message

[keen warren]

do u trade stocks ? lol

or options

[nocturne rune]

No. Just crypto

[potent briar]

Guys, I have been trying to understand how to use Lux but with failure so far. I am on the docs page on the website but I dont think it is enough. Is there a specific video where someone from the team is explaining everything?

[indigo cradle]

Have you seen my strategy videos?

[potent briar]

I went on the channel but I am not sure which vid to start, I watched a vid showing the updated version 5 so that wasnt the right one

Where to start?

[indigo cradle]

https://www.youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og

This channel 🙂

[potent briar]

Yep. Do you have a specific video I should start with?

[indigo cradle]

I'd suggest going from newest to olderst 🙂

[potent briar]

ok let me try again

Also just in case I am struggling with trading itself, is there a good video out there that you recommend that might help

[indigo cradle]

Investopedia the website has some great resources

[hexed palm]

Hello I see to much difference indicadores but what you recommend to 5 minute trading? For more %

Let me know please. Thanks

[indigo cradle]

https://www.youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og

Featured video 🙂

[hexed palm]

Thanks ✌️. I checked

[pine temple]

I thought when join here will be much easier to win some trades. Free indicator also showing buy and sell signals and than do some analysis. What is better in premium indicator from free indicator? @indigo cradle

[indigo cradle]

https://docs.luxalgo.com/getting-started/what-is-lux-algo#why-it-can-work

[velvet plover]

Also new here

[indigo cradle]

I would hope since you signed up you'd know why 😅 But read above to see why in details. Plenty of features that just simply aren't out there

Pattern detection in one, a ultimate MACD that you can compare to a regular and see clear advantages, real time divergences, signals with high degrees of optimisation - optibot ect ect

list goes on

[indigo cradle]

Welcome 😄

[potent briar]

Sorry Gecko, just want to know where can I find the s/r mode on dashboard? I only have a dashboard appearing when I enable the lux premium but not the lux algo sr & pattern premium?

[indigo cradle]

SR mode on the dashboard?

[potent briar]

yes

[indigo cradle]

Do you have a SS of what you mean?

[potent briar]

like in your vids

one sec

you seem to be always changing this. Where is that in the new update?

get what i mean

[indigo cradle]

This is now Lux SR and patterns 🙂

All of those were moved into Lux SR a while ago

[cosmic iris]

@indigo cradle may you explain what feature keeps the breakout bar from changing to a red if it is broken on the downside?

I really love this indicator lol but I'm guessing it's volume or momentum of some sort that will break the zone and also change the color

[keen warren]

then dont use mine

[nocturne rune]

Would you mind sharing it anyway, please?

[keen warren]

#📈stocks-futures-chat message

[crimson fable]

what a trable?

Not working. Oversell right now on chart

It used to work. Not now, I tried to create a new alert several times.

[shy relic]

use once per bar close, not "only once", that alert might have already triggered 🙂 Also make sure that when you set the alert the ultimate stochastic is displayed

[crimson fable]

I've tried everything, it doesn't work. I'm trying to specifically call a value, but it doesn't come out.

Could this be due to the fact that even these plots (Areas), values ​​are not transferred?

As far as I know, Trading View has a limit of 19 plots?

I deleted the messages, I will do the opposite. We have to redo the old alerts, which is strange.

[shy relic]

thats correct, the areas values could not be used for placeholders do to tradingview limitations, this could change in the future.

[tough turret]

when new update will be released ?

[swift pumice]

i renewed my subscription for 47.99 and it charged the wrong card could I get that fixed?

emailed support

[potent briar]

Admins, is there like a manual where it says what each line is, what each letter and word represent etc?

I know these ones are lft, head and righ shoulders I just mean the rest like when it says strong and so on

[shy relic]

plot labels can be highlighted on the chart price axis, but for the pattern detection you can't, as they are made of lines objects and not plot.

[jaunty perch]

im trying to use the algo premium autopilot signal - signal mode confirmation minimal gives me study error

[shy relic]

try changing the settings again or refresh the page 🙂

[next lake]

hey why im not on the lifetime role?

[indigo cradle]

Give [e-mail] an email 🙂 They can add you in

[potent briar]

I mean, take this chart for example, nothing is telling me what the blue and red dashed lines are (I know they are trend lines) and nothing is telling what the horizontal green line is. It would really be helpful if there is some kind of manual that identifies every line for us so we know what we are looking at

[indigo cradle]

We have a manual 🙂 It's our docs

!docs

[jaunty perch]

Learn about every aspect of Lux Algo at: https://docs.luxalgo.com

[indigo cradle]

You're wanting a legend basically?

[potent briar]

yes

[indigo cradle]

Right click

Labels

Tick indicators

It won't show everything of course like alex said; pattern detections are line objects

not plots

[potent briar]

is that in settings

[indigo cradle]

Nope

right click the price scale

[potent briar]

mmm..not exactly the accurate labeling, it doesnt even have to be on the chart, just a legend that specifies what each line can be

Thanks anyway 🙂

[odd grotto]

hi guys i m new here, its means you could buy here?

[indigo cradle]

Hi there and welcome 🤝

[odd grotto]

hi Gecko how r u

[indigo cradle]

These are contrarian signals; did you enable these on purpose?

Excellent ser 🤝😎

[odd grotto]

im still trying to

i thought its a signal of buying ? i m right?

[indigo cradle]

Technically yes

But these are contrarian signals

which are a little different in nature

I think confirmation signals here will be more to your liking

[odd grotto]

okay thank you!

much better haha

[indigo cradle]

yep 😄

Nice and trend following

[odd grotto]

yup thanks 😎

[next void]

I got a "Contrarian Strong Buy" alert this night, even though I disabled it? 🤨

[indigo cradle]

I'd suggest remaking the alert therr

[formal ermine]

Hello, when is the new update coming. It been forever.

[next void]

Will do, thanks 👍

[tiny stratus]

Yesterday there were institutional influences on the Luxalgo oslator Preamium. Today it's gone, same settings—brown bars.

[indigo cradle]

Same exchange?

[tiny stratus]

No it was not , thank you!

[lofty plover]

tradingview does not show the luxalgo yet. i relaunched the app.

[indigo cradle]

Have you connected your account?

[lofty plover]

yup!

oh hi there gecko :p

[indigo cradle]

Refresh your tradingview in 2m 😄

Hola 😄

Yep refresh in a few minutes

[lofty plover]

okie

got it. thanks much. ❤️

[indigo cradle]

♥️ welcome

[vast torrent]

on my 5 mins ES chart, MTS 10 and 20 is red but 30 and 40 is green, trend strength is 76%, is it downtrend strength 76% or uptrend strength 76%? LOL

[peak hollow]

hi people, please, does anyone has a proved configuration for 15 minutes scalping for crypto ?

[indigo cradle]

Do you have a screenshot 😄

By the sounds of it it's an uptrend with a small retracement

[undone kernel]

I set my alerts last night with autopilot frequency set to midterm but now I want it long term. Do I have to redo the alerts?

[indigo cradle]

You will do indeed sadly

[undone kernel]

😭

😡

🤣

[indigo cradle]

sorry hahahah

[vast torrent]

this is a 5M ES chart

i assume it is uptrend strength 76% since there is a STRONG BUY, what do u think? Gecko?

[forest delta]

Hi, appreciate an advise on the below.
I'm.following Lux video on using both macd and tried catcher on lower TF, today I noticed that the signal to sell was given and never gave any buy signal till very late although the macd was blue for quite sometime, so I need to know which to follow for confirmation, the signal of the macd cause it's confusing and I'm missed many opportunities because of that

[indigo cradle]

yeah a clear uptrend yep

Visually you can see normally and id say that's an uptrend for sure

given the MTS too

[indigo cradle]

The MACD serves as the entry

The trend catcher / signals act as a filter

[forest delta]

Yes but sometime it's a not a confirmed entry consider the colors of the candles

[indigo cradle]

So if it's not confirmed you should avoid

In trading you always will miss some moves

can't catch em all

and it's annoying

But filters are important

[forest delta]

And in your video you mentioned that we should only enter when the catcher is green, macd crossing and the buy signal is on

[indigo cradle]

Indeed yep

If you find this too much

maybe just forget the signals

Just use MACD and catcher

that's a nice pairing

[forest delta]

OK will try, been a month and still didn't find a stable strategy

[indigo cradle]

Give that one a shot 🙂

[wary fractal]

can someone explain the difference between the 2 "same" options?

[indigo cradle]

Second set are for contrarian signals 🙂

[wary fractal]

ok, thx. And what does it mean? 😄 (sry for this question...)

[indigo cradle]

Contrarian signals go against the trend 🙂

They are the other signal mode

[vast torrent]

Hi Gecko, the optibot only has 5M up to 4H, what about Daily? just use default or set it to auto pilot ?

[indigo cradle]

For daily i'd suggest using the dashboard's optimal sens 🙂

[vast torrent]

how often does it change? Daily?

[indigo cradle]

That value really won't change too much

[vast torrent]

even on short TF charts?

i assume they keep changing on my 5M 😅 never pay attention to it since i always cooy the optibot

[indigo cradle]

For the daily maybe that value would update once every 2 weeks

max

[vast torrent]

great, thanks!

[wheat urchin]

Looking at this video, i turned on my eq cloud and its not showing up

Problem solved^

How do i get rid of these prices, just want to keep the current price + bid & ask

[shy relic]

right click on price axis -> labels -> make sure the two highlighted options below are not selected 🙂

[wheat urchin]

Thanks

[wheat urchin]

currently im paying monthly.... lets say i want to buy the lifetime in 2 months, I get credited the 2 month fee towrds the lifetime membership?

[odd grotto]

I just wonder why I don’t have the exit signs?

[shy relic]

you have different settings 🙂 The livestream description indicates sensitivity 6 and agility 32 settings are used

[odd grotto]

yep i did but it still doesn't have exit sings

[shy relic]

exit are represented by the blue/orange crosses, you can see them on the chart you sent 🙂

[odd grotto]

yup thank you ! but why are the two pictures so different? even i was set 6 and agility 32

[shy relic]

Because the tickers are not the same, you are seeing the perpetual futures, the data is slightly different, but if you see binance ETHUSDT you will see the same signals 🙂

[odd grotto]

i got it thank you so much

[lyric quail]

What does “x” mean?

[ember edge]

Exit whatever position you’re in to lock in your profit

[green pulsar]

Unable to setup the alerts in trading view for Lux Premium Indicator

[green pulsar]

Any help here?

[shy relic]

try refreshing the page 🙂

[undone kernel]

Would you trade this in your honest opinion? The first photo is my 15 min time chart. The 2nd is my hr timeframe

The first photo has detected a strong uptrend based on my dashboard. The hr timeframe has not

[misty cloud]

Hi admin @indigo cradle

[crimson helm]

@misty cloud has earned the Lux Level 1 role!

<@!979812740916977685> just levelled up

Welcome to the Lux Level 1 role! Thank you for being an active member of the Lux Algo community <3

[misty cloud]

Does the new YouTube short strategy works on 5m?

Currently I’m using the hypertrend strategy on 5m and it works like a charm

80% win rate so far

[slim root]

Hi

I trade fir 1 hour or 3 hour what is the best tf to use with Lux algo

[indigo cradle]

You do absolutely 👍 it'll be prorated

[indigo cradle]

It could do but be careful with lower timeframes

[wheat urchin]

Thats awesome!

[indigo cradle]

!upgrade

[jaunty perch]

You can upgrade your subscription by logging in to your customer account at: https://luxalgo.chargebeeportal.com/

Once logged in, click your account, click on your membership, and select 'Edit Subscription'.

From here you can select your upgraded plan of choice from the blue drop down menu, see the prorated charge, and click 'Update Subscription' to complete the process.

[fading ore]

Morning guys, I’ve asked before. But can’t seem to find it in the discord anymore. What’s the main difference between the neo cloud vs eq cloud ? Thanks 🙏

[indigo cradle]

They really are similar in their use and function, the neo cloud can just help filter in a ranging market

[vast torrent]

how does the neo cloud help filtering in a ranging market?

[indigo cradle]

It will go sideways basically or price will chop inside of it

[jaunty perch]

Hi iwill sign lux algo premium indicator now.please give me best setting for this indicator.

I going treading view and add premiam indicator but any best setting please support me.

@indigo cradle

[rigid crystal]

i also need best settings for Crypto BTC/USD BTC/ETH. Source is FTX. what is the correct settings which timeline will give correct signal. i get to many false signals.

can anyone help on this, im new here

[indigo cradle]

!settings

[jaunty perch]

Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings

[jaunty perch]

Click Manage Account here: https://luxalgo.com

Or email [e-mail] and our team will assist you with any request the same day.

[indigo cradle]

@vital sierra

[gusty birch]

Leaving us so soon 🥺

[crimson fable]

Good afternoon!
Since you have technical experience, tell me, is it really possible to make a strategy in Trading View based on several indicators to test it?

There are various strategies, but based on several indicators, and I want to test them with time. Doing it by hand is very time consuming.

What solutions exist?

[indigo cradle]

I would suggest waiting a few days for our next update 😉 This should help

[crimson fable]

I need to test strategies based on 3-ex data! your indicators immediately. Reading from 6 to 10 parameters to open a trade.

plot's - this is Predictive Ranges

[crimson fable]

As an example:

If trend: Buy
If the MACD changes trend to bullish at a certain moment.
If the price is in the right place in Ranges.
If above EMA50/100
If Stochastic is in a certain range.
If the RSI EMA is below the main line.
There is no overbought on the MACD

Let's open a deal 🙂

Here's how to check this on the backtest automatically?)

All this data is based on your indicators (except EMA of course)

[paper moat]

Hello guys. I have a question 🤔 what is better to use auto sens/agility or opt ?

[crimson fable]

I think it all depends on your strategy and timeframes)

[wary fractal]

sometimes is good, sometimes is shit. better set by yourselfe..

[paper moat]

It was weird situation because on btc 1h sens 12 I had buy signal after candle closed the sensitivity change from 12 to 19 and of course buy signal disappeared. Doesn't make any fck sens ...

[crimson fable]

Why doesn't it make sense? You changed one of the variables, naturally the result will change.

[paper moat]

Because sensitivity changed after candle closed so when you get buy signal on 1 hour tf on sens 12 and after that you changing sens to 19 because its saying that you should fallow sensitivity with new candle and signal is disappearing where is the point of this signals ?

[indigo cradle]

You'd most likely want to do what a few other users have done here and set up a server to maintain flags and then if those flags are correctly set send trade

[indigo cradle]

You are refering to optibot?

[paper moat]

Yes

So even when optibot is referring that I should change my sensitivity I should ignore that ?

[indigo cradle]

Why would you ignore that?

[crimson fable]

Do you have contacts for these users?

Who did exactly that for Backtest?

I have already made deals open on certain flags automatically.

At this point in time, I am interested in testing the strategy.

[indigo cradle]

I wont really hand out these people names as they may not want me to say but they are very well known 🙂

hint: in crypto chat

[indigo cradle]

Update the settings when you can; the fresher the optibot settings the better 🙂

And if a signal changes a lot maybe reconsider a position

[crimson fable]

Ah, ok. Perhaps you can write to them in a personal, and if they consider it possible, contact me 🙂

In any case, thanks for the info.

[misty cloud]

Hi @indigo cradle sir

What’s ‘projection’ in SR indicator?

And how to use it?

[indigo cradle]

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/projection 🙂

[pine temple]

Is it possible to get alert on trend lines from indicator Lux Algo Sr & Patterns Premium ?

[feral lava]

looks like these are the only plots you can set alerts on as of now in this toolkit @pine temple

[crimson fable]

What is mean, Minimal Strong sell/buy?

[feral lava]

it's just same thing as regular Confirmation Signals but visually they are arrows instead of big labels that say "buy" & "sell" or "strong"

[crimson fable]

Thank you!
I managed to get data from TW in real time from all indicators at once and all data from the chart, now I'm thinking how to deal with it 🙂

Including on the Replay Bar, I'll try to do a backtest tomorrow with your indicators.

[feral lava]

No problem, very cool! Thanks for sharing 🙂

[jaunty perch]

Hello. New to the community. I would like to know what the purple candles mean?

[feral lava]

https://twitter.com/luxalgo/status/1545245022693609472?s=21&t=Rv1EwSl5mlcVaZfCpAVLbA

Lux Algo™ (@LuxAlgo)

Note: Confirmation Signals (default) display normal & 'Strong' signals. They also switch between normal/strong via the candle coloring.

It's a trend following experience and users can even get similar usage with the signals turned off by just viewing the candle coloring 🟩🟪🟥

Twitter · Jul 8, 2022, 3:14 AM

@jaunty perch

[cunning drift]

@indigo cradle when update will release and whats new in the update?

[summer verge]

I have set up an alert for Lux Algo Premium on my free version of TradingView. I am finding that I need to reset the alert every time it goes off as it deactivates itself. Is there some way around this cause it is super annoying.

[shy relic]

It might go off if you set the alert frequency to "only once", use once per bar close instead 🙂

[summer verge]

Of course. Thanks so much.

[eager cypress]

just a question for MACD, if I wanted to set the MACD to match next TF (e.g. on 15M chart but wishes MACD to be like on 30M or H1), can I adjust to do so? if possible what are the settings might be? Thank you

[indigo cradle]

This is MTF stuff which sadly the UMACD doesn't have currently😔

[tacit compass]

Hi please my bot isn’t showing in TradingView

[indigo cradle]

Have you connected your account?

[odd grotto]

why doesn't it show exit signals sometime?

[indigo cradle]

I see the sell signal at the end

[odd grotto]

sorry my bad, i mean exit signal haha sorry about that

[indigo cradle]

ah it won't always show exits 🙂 Only if conditions are correct and optimal for an exit

[odd grotto]

got it , thank you

[covert lark]

Whats wrong with the premium? Says study error

[indigo cradle]

Remove and re-add 🙂

Which features have you enabled?

[covert lark]

I figured

Thanks

[crimson fable]

Are there any dependencies already now to understand that the gradient is purple? Regardless of the schedule? Getting some data?

[indigo cradle]

Not really sadly due to plot limits

[crimson fable]

Will something be implemented in the next update?

[indigo cradle]

Honestly it's v v hard

with limits

[forest delta]

Hi, I read some comments on YouTube about people talking that all lux indicator does repainting, what does that mean?

[indigo cradle]

It's from people who have 0 idea what they are talking about sadly 😅

Repainting is after a bar closes the indicator can change past results

e.g. If a signal was wrong in the past it would remove the bad signal

[forest delta]

OK so nothing to worry about right?

[indigo cradle]

Nothing to worry about at all 😎

Now you can educate folk in the comments section 😉

[hollow edge]

Where can I find the best beginner training for Trading View charts?

[indigo cradle]

You're looking for a guide on TV?

[hollow edge]

Yes, thanks...

[indigo cradle]

We actually plan to make a video on this very soon 🙂

[hollow edge]

Cool beans, thanks!

[lethal kelp]

Hi, may I know the exit signal in both confirmation and contrarion signals is real time?

[indigo cradle]

They are indeed

[heady leaf]

how to setup lux algo premium never lose ?

[indigo cradle]

Never lose? 😳

[heady leaf]

yes

[indigo cradle]

You want a 100% win rate?

[heady leaf]

yes

[indigo cradle]

This is not possible

[heady leaf]

so what is the best setup ?

[indigo cradle]

Otherwise we'd be printing money 😅

!strategies

[jaunty perch]

Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr

[undone kernel]

So according to this the only confluences you need is the catcher and corresponding signal. No matter what timeframe. No price action or multi timeframe analysis. Is that correct?

[indigo cradle]

These are theoretical ideas mostly; always doing some extra analysis will help

[lethal kelp]

got it. tq

[static spoke]

How can I reach out to cancel the subscription? I'm not really going along with LuxAlgo and how it works. Out of 100 supposedly sell/buy entries, I lost on 85 of them. Or else, who could give me a gentle hand on helping on a call configuring and doing some live trading help?

[indigo cradle]

What strategy are you using? 🙂

[static spoke]

I'm still trying any, but I'm really unable to do anything

[indigo cradle]

But what strategy?

[static spoke]

No strategy

I'm just playing with everything

[indigo cradle]

So how exactly are you trading?

you're doing analysis?

[static spoke]

default settings, changing signal sensitivity

nothing else

[indigo cradle]

So you're following signals?

[static spoke]

basicallly yes, isn't it supposed?

sorry, i'm really lost

[indigo cradle]

Oh no

On page #1 of our docs we say plz don't do that

[static spoke]

Tried to follow all IG videos and stuff

[indigo cradle]

Have you seen any of my videos?

[static spoke]

yes

scalper ones, failed a lot, then ones for more daytrading, profited some, lost some, but then, news do affect and I get really lost

[indigo cradle]

And which timeframes were you trading

[static spoke]

5/15 mins

[indigo cradle]

Did you try any other of the strategies?

The more classic

trend following ones

[static spoke]

tried 3/4... no go, and they just come too late, if I profit 2/3 pips it's a lot

[indigo cradle]

how long were you using it for?

[static spoke]

uhhh.. 2 weeks-ish maybe?

[indigo cradle]

You've used all the features provided?

Checked everything out?

Played around?

[static spoke]

I tried 5/6 strategies, and spent 1 entire day, the first day, did good, but then I tanked down and blown a funded

then I'm trying this on a 100K demo

[indigo cradle]

Rule based strategies can be problematic sometimes

[static spoke]

bottom story: I think this is a "me" issue, and I'll give up for now

[indigo cradle]

If you feel that:

[jaunty perch]

Click Manage Account here: https://luxalgo.com

Or email [e-mail] and our team will assist you with any request the same day.

[indigo cradle]

You can change things here 🙂

But in the future I would suggest taking each trade as an individual

and using features or indicators to build up an analysis

rather than check if fixed criteria are met

[static spoke]

yeah.. I'll spend a few months trying to understand the fundamentals

[opaque falcon]

Hello, i have an answer...in yesterday BTC pumping the Smart money indicator was constantly active at 25-30%...what does want to tell?

[static spoke]

I've requested it through the client area 🙂