#🤝support
1 messages · Page 266 of 1
Smack, is there a tool/setting or indicators you personally use that you “have to tell me” about or consider “cant trade without”. Or is there a combination of rules you’ve personally come up with that just hits so well with lux?
Have you seen any of our strategies? They are a little outdated but show nice combos
But honestly some of the new stuff like the ultimate MACD, NEO cloud really are nice
I havent yet. But i am digging into this discord for sure. I’m just glad to finally find a community of people that use same tools. I felt alone for so long and couldnt find anyone thats used it for long enough to know settings that work etc.
I like the neo cloud. When stuff breaks out of the clouds its legit
How do i use the neo cloud
I see so if its down the neo cloud its break down, up the neo cloud its break out?
I was meant to ask how to use the EQ cloud?
Also whats hypertrend?
Luxalgo is working on the documentation update. Just try and paper trade. You will find a lot of documents and videos under Luxalgo
Where do i find this paper trade or videos under luxalgo u said
it's a trend following indicator overlay in the main toolkit 🙂
The long-awaited v5 update is here. New presets, signal modes, indicator overlays, and restructuring of our main toolkit enables greater possibilities to trade than ever before. Get instant access: https://luxalgo.com
Full overview on our docs: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/
NEW SR Mode Toolkit overview: https:/...
I watched that video already, ill watch it again now
Watch them all V5, you need them.
Roger that
Can you give an example please
Use your chart and toggle between the time frame
Yeh i do that, i check 15m and check other time frames for any other warning signs
Why dont my notifications trigger always thats abit of a issue
1H, 2H, 4H, D and week
Which alerts are you guys using for your phone to ping and tell you to look at chart.
If you want to sit in front of the screen full time then 👌 Especially since you are on 15min charts. What will you do if a drop or a bull run happens in the middle of the night?
Understood
hi mate, please please please back test and try different methods before you trade with real money, save your capital at all cost. The lux indicators are amazing, but you need to put in the hard work of back testing, trying out different indicators, confluence etc. All the best. I am still back testing, and the little trades that i have placed, the ROI has been phenomenal, Lux will give you that edge 100%.
What does back test mean, look at the charts u mean yeh?
And thanks for ur concern and advice i love you for that.
yup. add your indicators , setup your charts, go back in time and test and get a feel ... repeat it number of times with different pairs
do i change these 2 for the opti bot settings?
Typo found: https://docs.luxalgo.com/getting-started/popular-strategies 👌
what's this?
I would be a great feature if you can add an alert. Every time that the HH or LL is displayed it shows a great entry point.
Do you use normal candles or heikin ashi?
ah thank you
it’s a glitch on TradingView, you have access
major sell doesnt show on advanced oscillator? only major buys?
You can turn it on in the settings. Not sure why it’s not on by default
Talking of the oscillator- admins - do the major buy/sells reprint? I noticed this on a chart earlier today
cant see an option to turn it on?
i can see major buys - minor buys - minor sells - but not major sells
Good day!, Can you please advise why the Luc algo indicator dimmed the alret option! and the lock in front of the indicator under (invites only scripts ) is RED ,
prolly should be reflected in next update
lux
likely just a TradingView glitch, if you refresh it should turn green
removed the indicator and add it back, Nothing!
it shouldn't, but let us know if it happens again and we will investigate
It was a glitch! working fine now - Thank you
the major sell does not show by default in lux "advanced" oscillator - was that the intention for some reason?
also, it would be nice to bring back the dashboard for the "advanced" type oscillator
thanks for the feedback, we will talk about this and introduce in a potential update 🙂
no problem - thanks alot!
I also found this issue on 1h timeframe when i was viewing MIR/USDT - can be found between May 28th 14:00 and 23:00. not sure if this is supposed to happen! @shy relic
kinda off im guessing shouldnt happen!?! - misaligned and in some cases bullish divergence line without dots between two ends - just a dot on one end
Its a divergence
yeah
i thought the div line should connect the dots? maybe my understanding is incorrect
since its in real time it will be sensitive to some noise, we are working on improving it.
AH okay sounds good
yea just thought i would reach out / ask since i havent seen it happen before / much at all
one of the greatest indicators hands down imo @shy relic so thank you
sure thing, thanks a lot for your feedback 🙂 It helps us makes the toolkits better
okiee
I use normal candles.
quick question - do the sell and buy signals inside the advanced oscillator pop up in real-time, i.e., no need to refresh?
What does this “X” symbol mean on top of the candle? Stop reversal?
exit symbol
Ok
Cheers
But isnt exit same as sell? So why dont it say sell? Or it means exit but can keep going up?
exit the last confirmed signal then get ready for new one.
Roger that
@shy relic hello, i want to ask something. since there's new indicator LUX algo SR & Pattern premium. and the settings menu predictive SR >> Ranges. if i want to set alert the predictive S1 or S2. can u show me how. so every time its touch the S1 and S2 lines. they trigger the alert..thanks
Whats difference between strong and buy and sell, does strong mean buy in or get ready to buy or sell? I feel strong is a better indicator to buy and sell then the actually buy/sell symbols. Thanks
!signals
Learn more about our features & Signals: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals
@primal ginkgo
updating docs for this in the week 🙂 i’ll get alex to answer though before then
ok tq...
You'd select the price crossing; then select Lux algo then the SR1 or 2 plot
Why Luxgo alert me to buy but it doesn’t pop up buy button on my trading view ?
Pls help to advise pls admin
is trend catcher variable name just "Trend Catcher" and does it evaluate to "up" or "down"
trying to code multiple criteria alerts
i recommend you go through documentation in Lux Algo's website and read everything that is there @fleet rune
it will help you understand all of the tools and explains it well
Pls recommend which option that trader like to set
If you recommend like this so the purpose of creating this discord group cannot customers painpoint
***solve
Pls help to recommend for spot trader like me
What do you mean by this?
You want recommendations for features?
Yes because I am spot trader
I need suggestion and recommend—> not ask me to read the book by my self
I have a question how to set up luxalgo to give me a signal instantly I usually enter when the candle close and opens new candle but it’s to late already the first candle make 30-50 pips anyone can explain what the best strategy to wait the candle to close and enter there or ? Please advise what the best strategy
This is not a good approach; you have to put in some effort
Otherwise this won't end with success
It takes 20m
We make videos too if you prefer this?
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
This playlist will help 🤝
tq
@indigo cradle hello . i want to ask about alert for exit signal (buy or sell). if i want to set an alert for exit buy or sell . and also in alert settings must have message section. if i set "any alert () function call" the message section is dissapear. if i used select the price crossing , it also trigger the previously exit signal, i just want the alert for present / future exit signal..thanks
Do you need the message field available?
I will check out thanks
Admin, quick question, you know the predictive SR ranges, how are the numbers used next to it?
You can adjust to your trading style; the ranges you wish to trade
1 being for detecting smaller ranges, 10 being for very large ranges @hot goblet
thank you @feral lava 👍
do i change these 2 for the opti bot settings?https://cdn.discordapp.com/attachments/702685056736559124/980570582900944946/Capture.PNG
Yep these are the two you change
YES
We have in built exit buy and sell alerts
If you use them you can use the message field
ok thanks
ok thanks
hey, i saw that in V5 there is alert for exit buy and exit sell, very good. But is this for confirmation or contrarian?
Will work for both
Depends on the mode you have loaded
vau, very good
Hi! I´d love to see some videos with diffrent settings for diffrent timeframes 🙂 anything planed?
Like strategies?
ye
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
Full playlist 👐
sure i know that 🙂
thought you´re planning to do some more advanced or something ?
or renew
because some videos are done with Lux Algo v3.x
Just a quick question the breakout zones has been removed from the indicator right? With the new update s/r mode under autopilot signals settings is missing
it’s in Lux Algo SR & Patterns indicator from invite only scripts
@feral lava I’m getting an error….(study error) internal sever study error
With the new indicator I just notice I can’t set up alert also no breakouts zones in the indicator to much issues
refresh, remove/re-add - should work
settings —> levels —-> change Liquid Pivots to Breakout Zones
you should be able to set alerts as normal 🙂 just select Lux Algo SR & Patterns
Same, I woke up to it having crashed at some point overnight. relaunch(refresh) didn't resolve. Recopied from another chart did however (to save config). Just noting this for statistics tracking
Any idea when the normalized oscillator is coming back?
I am trying to add alerts for Lux, but the option is grayed out. Any ideas?
I was able to add alerts yesterday, but had to remove them as I changed some settings.
try refreshing the page 🙂
Are there any alerts for Neo Cloud feature introduced in V5
Now I am getting "Study Error"
Changed to different time frames and different stocks, got the indicator back. But Alert option is still grayed out.
you previously had access right? try adding it again
Crashed as I was clicking through my watchlist
You mean remove the indicator and re-add it?
yes, if you had access then you should not see the study error not_auth
what crashed? the tradingview app?
Removed, re-added. Alert option is still not available.
well, "study error" if you want to be explicit.
do you already have alerts set?
yeah, TV being iffy today with the algo and errors, I had to play around with it, delete, refresh a few times, change symbols, etc....
so you have the exclamation mark appearing, is it just showing study error? any more information?
Correct. No extended error reporting in it. Can additional verbosity be enabled?
example
good to know, not sure what could cause it, but try changing a setting, this will make the indicator update and it might work again.
in general refreshing the page is what fix this issue, you can retry this, else it might an issue on Tradingview end, which would require waiting unfortunately 😦 Their status page is not reporting errors at the moment.
That's gone now. But I am still unable to add alert.
I restarted my machine, and it worked. Lol
Good old reliable trick.
Maybe restarting just TV app would have worked too.
🤣
thats why refreshing tend to work 🙂 Glad its working now, let us know if you find more errors or need more help.
Question - if I set an alert, but have not checked any of the options here, I guess I won't get any alerts?
Is that right?
Tried, it sometimes worked, sometimes didn't. Same with re-adding the indicator from scratch. Here's a demo of inconsistent load behaviour
You sound just like Ran. 😛
depends on the alert you set 🙂 These particular conditions are for the "any alert() function call" alert condition, so if you set that alert you should check some of these options. But we also have alerts with conditions already nuiltins, you can also use them.
We will try making it easier for Tradingview to deal with the indicator in the future. Really sorry about this 😦
The alerts are dependent on time frames, right? For example, if I set alert on strong buy on 1 hour, it doesn't mean I will get strong buy alerts from 30 minute candles. Is that correct?
yes, alerts are only based on the timeframe and indicator settings used when they are created, so switching to a different tf once you set an alert wont affect it
It's ok, is there anything I can do to generate more useful debug for you guys?
I appreciate the initiative, however it would be Tradingview job to do that, their error messages are not always helpful, however it is likely caused on their end if it mention "internal server study error"
Ahhh, it's being processed on their server as opposed to the local client?
indeed, alerts and scripts execution are computed on their servers 🙂
Ah, very cool. TIL. 
Another thing I've noted on the Lux Dashboard is that Autopilot reads as permanently enabled, regardless of user setting, even from stock add to chart.
I'll try to get that into a more useful datapoint, of course those vids don't show it 
this might be caused by a preset being selected 🙂
Ahha! contrarian does it! Sorry for that false positive.
no problem, changing settings wont affect the indicator when a preset is enabled
can someone remind me how to update to the latest version of lux algo?
you can remove the indicator from your chart (remember the settings just in case you need them), go back to your invite only scripts and add the indicator again, then save the chart layout 🙂
thx
Question: what's the easiest way to set a mutlicriteria alert... I want to set an alert for strong buy combined with trend catcher up and trend tracer up
at the moment this is not possible, we are however discussing the possibility for such alert
Are there definitions for each of the indicator overlays (Neo Cloud, EQ Cloud, etc.)?
EQ Cloud - Reversal Zones - Both
Thanks!
It is sooooo needed - I was thinking of coding in pine editior? I just need the exact variable names and the arguments they would evaluate to so I can write it up
Like there's the lux alert for catcher up, tracer up, what is the underlying code to figure that out, if previous instance is higher than current one? How would u even get the previous instance (its value) for the catcher or tracer
you can only access one external series output from an indicator on your chart so it wont be possible.
We will work toward this kind of alert, as it has been requested before 🙂
Ahaaa
Yeah its sooo needed especially for advanced alert users
So might as well just run on strong buy and strong sell signals and then just keep checking the tracer and catcher everytime the signal comes out
I dont see another way for this currently, am i right?
you would need to keep track of every value of the tracer/catcher, so you would need to set an alert to trigger every bar, and return placeholders values for the signals + tracer and catcher, only way to do it, and its not fun.
Great strong buy just another crypto scam
Yea its too much... defeats the purpose! But anyways would really appreciate if this can get pushed to next sprint release... thanks alot for the help alex!!
And Hey if u hiring leme know! lol
Wow sell notification 2 candles later strong buy funny part the red candle with sell indicator closed at the same price the strong buy candle opened why not just have sell at the open of the red candle then put a strong buy at the close of the same candle
you can adjust your settings to avoid the algorithm being sensitive to these kind of variations 🙂
I am new to use Lux algo please send settings of Lux algorithm in trading view
I am new here, do we get notifications to enter a particular trade or we have to do our own analysis using the lux indicators to mark entry and exit
I mean where do I check for the notifications on the discord group if given by the support team
use for confirmation. Go check out the YouTube channel and and watch all the videos you can in order to get familiar with how to use it. There are many videos by lux algo And other affiliates
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
@lusty harness ^
Thanks
Go check out the lux algo v5 update video he goes over settings there
The long-awaited v5 update is here. New presets, signal modes, indicator overlays, and restructuring of our main toolkit enables greater possibilities to trade than ever before. Get instant access: https://luxalgo.com
Full overview on our docs: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/
NEW SR Mode Toolkit overview: https:/...
hellou . why i cant buy PRO+ ?
Hello any reason why my notifications dont always trigger? For example, i followed all the guide lines on trading view, set my lux algo alerts all on and trading view to function call all any, still dont notifiy me when i noticed a sell point on the chart.
Hi I can’t also seem to get the regular Buy and Sell to trigger in the function call alerts.
looking in the settings I don’t seem to have them there but I do have the Strong Buy and Strong Sell two times. Am I doing something wrong here or is this a known bug?
You need to enable "Confirmation Buy" and "Confirmation Sell" as well @somber flare
Can you send a screenshot of the settings?
hi, what its meen ? * ?
Exit signal
"x" signals can help you with taking profits 🙂 https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals#confirmation--exits
thenkyou
Settings were adjusted to recommended Opti bot settings ??
you should adjust use optibot settings yep, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings for more info
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Hi there - I'm experiencing this now - looking at 05/27 on the 3m chart. I know you mentioned going to a higher-fidelity, though my subscription plan to TV only allows me 1m, and I use the 3m as a separate confirm for my own peace of mind.
Here are my associated settings -
hi , everywhen should i look up the discord to change the sensitivity and agility settings
does get updated every day
@shy relic
anyone?
I think you need to give them more than ten seconds to answer the question.
🤣
It gets updated every day yep 😊
Fresh before market open
thanks
what is the best time frame to use in your experience
for the luxalgo premium indicator
I think it has to suit whatever your desires are. They have some recommended approaches to using their indicators in their documentation.
The higher the better for most 🤝
I sub for 1 month but I'm not getting the vip opt setup for crypto
Crypto scanners?
Hello admin... I am having problems with lux algo... It is stressing me to death
I purchase the lux algo.. Attached to. Tradingview
Went into settings and made changes... Yet still nothing is appliet to tradingview
Im not seeing the buy or sell signal
And thats the main reason for purchasing
It dosent matter what i do.. Im not getting nohimg at all
Im seeing the trend tracer.. The trend catcher or the neo cloud i set in settings
Thats why im frustrated
Do you have a screenshot
I have a shot but i dont see the feature i discord how to retreive it to share
@feral lava for the alerts - it shows that it adopts whatever sensitivity and agility that is there even if autopilot is on eh?
meaning, the alerts will always be based on the sensitivity and agility filled out - even though autopilot is on
autopilot overrides all
if autopilot is on, it will not take sens/agility into account
can you send screenshot of what you see in the alert?
likely yea, it may show it but yea it’s just autopilot if it’s enabled
yea basically when choosing just default "anyalert()", it places those constraints
Lux Algo Premium [5.0] (None, Confirmation + Exits, 37, Confirmation Gradient, Off, 4, 30, Mid-Term, Bottom Right, Large): Any alert() function call
Wow I started using Lux algo when they first came out it was all very basic today I’m so impressed with the new indicators and how accurate this can help you be.
I already gave you guys 5 stars on trust pilot if I could I would do it again.
How does the smart money % work ?
Is that for SMT?
I tried delete and redo TradingView alert and again it came up calculations error on alerts.
yea should be just autopilot - it’s all good that it says settings, it’ll fire autopilot signals
hmmm - looking into this, i’d suggest just restarting them in the meantime, thanks!
thank you ❤️ glad to hear
The dashboard displays the most relevant metrics from our premium features. This feature is extremely useful to easily obtain pertinent information about the market and can be used in confluence with confirmation or contrarian signals.
Ok no problem.
hello I just purchased the lux premium. I have tried by following the buy sign and in all three first buy are lost because after buy for long position, then there is strong exit signal (without any buy exit confirmation). Is it normal?
Most of the time, that case happen for my case, after I buy at the yellow area then there is suddenly strong sell sign which force me to sell immediately
Cheers thank you
Have you adjusted your setting to the type of market your trading? I use 5m and 15m two charts one with long term trades and the other with short term and I confirm my trades like this also using the new macd should not be loosing so often.
For these 2 signals in your screen shot, both the Trend Tracer and Trend Catcher are conflicting, so based on this, these 2 trades are not confirmed to take. My analysis tells me ranging period, no trade. Hope this helps. Also, both these trades are close to 2 separate support/resistance levels, or breakout, liquidity levels, more clues of caution.
@feral lava hi Admin. Im some how not getting the buy and sell signal even when i refreshed the screen.. I. Even upgraded to the pro+ plan and that didnt do nothing for me...
I see, so the signal buy is valid when there is buy signal AND Trend Tracer is green AND then Cather is also Green. Am I right?
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Make sure to select it from Invite-only scripts
This is also another lost, trend tracer and trech cather both green with buy signal, after buy then without buy exit suddenly it's appeared strong sell signal and it went down. It's just happen recently APEUSDT
ok, let me try to change it using invite only script
I have used invite-only script/lux premium and it's the same
sorry, should be this screenshot
false breaks do happen
how can I prevent that in the future? It already happen 4 times for me and all are lost
nadaraya-watson estimator is also a good indicator that goes along with trend catcher/tracer
probably switch to a bigger time frame
Hi, how do I get LUX Statistics Premium back?
is there any chat discord about buy alert for crypto that I can follow?
you want to go into the smaller time frames to see a confirmation then put money in. imho
I am using 5 min chart
for instance. i use 15 min charts to make trades. then i go into 5 mins or 3 mins to see a confirmation
i changed my settings for short-term. idk about others but ye
Theres really more to it, we try not to take every signal based on Trend Tracer/Catcher. What time frame is this?, direction of Neo cloud?, whats longer trend? (1hr, 4hr...), and your also trading Ape, crypto imho maybe a bit jumpy. was it close to news? session open? low trading volume period of the day? And was this buy signal at the end or exhaustion of the trend tracer? so many variables, and you need to find a set of rules that caters to your style.
and 5min chart is almost borderline danger TF, 1min is the kiss of death, not for the faint of heart. Look at 1hr, 30m, 15m. Once you get that down, then head over to the 5min
Here is an example.2 charts, same instrument,1st chart is higher time frame 4hr. Looks awesome, right? easy right? Now look at it on a 5 min chart for past 2 days......
if i want to make money per day say. just $100 a day. would 15 min timeframe be good enough?
Lord have mercy on me. Im stressing out too much on this project... My screen gone haywire and idont even know how to fixit
Thats easy peasy, trade on a higher TF like 15m or 30m, trade in direction of 1hr and 4hr charts. Enter trade and let it ride to a hard target of $100, your stop loss is a floating SL, meaning set it far away, but your finger is on the mouse to move that sucker when price action gets into profit maybe $25-$50 into the trade. This is they way I trade pretty much. What if I have. false signal, then my actual signal to close me out os when one of the indicators turns the opposite direction. I may use the Lux MACD, or candle color, or Lux Oscillator, or whatever. Once price hits $100, it closes automatically, shut down your computer, who cares if the trade goes to $500 or $1000. Its VERY hard to catch a trade thats goes $500-$1000. But its an easier guess for an entry to go $100 @wind ivy
There is no way this is newbie friendly at all... I cant figure out nothing
There should be other ways to assist in fixing the screen... Those videos not helping me...
I feel hopeless
your screen is fine, you just have to adjust your right scale, move your mouse over to the right scale, click and drag up and down and you will know what i mean, after that, right click on the right scale and you will see settings to correct this moving forward
Take a rest....you will get it sorted out soon...it will be worth it in the end
Ok. Guess. Will go to bed and get back on it tomorrow.. GN.thanks!
Also, be careful of Luna. Old Luna, new Luna...I smell danger 🤣
Does the small blue arrow mean reversal or chance or reverse?
Pivot oscillator is in Lux Algo Oscillators v5
i pinged devs about the other 2 indicators, volatility & institutional activity, we can likely just include in the oscillator script released in #🆕new-indicators linked
click “auto” in the bottom right of your chart
blue arrow is not Lux Algo
Oh, what is the blue arrow then on trading view?
Not sure - probably some other indicator 🙂
is there any LIVE buy signal shared for crypto by LUX community?
Sorry thanks for clearing that up ill get rid of that
Yes am interested too
Our #🙋support shares stuff, you can also use #🔔scanners-premium to get confirmation signals on the higher timeframes
Signals aren’t meant to be followed blindly, they’re just for following trends & giving you ideas to look & do your analysis
we automated 2,000+ TV alerts into there 🙂
lol 😃
try to buy this zec 5m chart, hope this time is profitable. Looking for exit buy signal
You have, log and auto scale activate unclick both and press right click on your screen and the reset chart
it's profit this time round
how do you guys search good crypto to trade daily? what criteria that you are using? or you stick to one or two crypto only?
Please make sure not to use signals are entries, they are not intended as such
They’re named “confirmation signals”
what is confirmation signals? how to display this?
they are the default signal mode, they should already be displayed, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals
thanks, let me check
Who can help me understand how to prevent the calculation error from happening? If I cannot depend on the TV alerts firing to program my exits, it's useless and I'll certainly be losing money
Hi, what’s the setting for lux algo 5.0 if I wanna scalp on 1 min. Time frame
Hello guys!! Really liked your indicator (even if i need to study it deeper)
When you set the alert turn off the dashboard
And other features
We really suggest not trading the 1m chart 😊
just get another small profit from short. Thanks for the Lux
I think better to trade with Strong confirmation signal, not just normal buy or sell signal
Does lux has any crypto screener such as display in LIVE for any crypto which has sell/buy STRONG signal in 5 minutes chart? Does it integrate with tradingview crypto screener?
I checked it doesn't have LUx option in the trading view crypto screener
Alerts and screener are different. I can't set alerts in all crypto. Meanwhile, screener is doing screen for all available crypto and show the result which is matched with the criteria
TradingView does not allow for custom screeners sadly
ah ok
How do I know there will be second exit sell? I have sold in the first x mark
ok, thanks
@shy relic I am trying to get values of cloud lead and cloud lag in alert like {{plot("Cloud Lead")}}, but not getting values. Please guide
Could I see a screenshot of your msg?
hello, what to deu if come sell are buy, and i get alert and buy are sell, and after signal ist gan , what to du in this situation ?
I dont understand sorry 😦 Do you have a screenshot of what you mean by this?
if i got buy signal are sell. i buy, and after my buy are sell signal its gone, why ?
!confirmed
A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.
Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".
sooo im looking at this right now. what is an easy explanation with using this indicator? (Neo Cloud)
Hi all, if I connect FTX to TV through the Trading Panel, will my bot execute orders there directly without alerts?
Are there any decent tutorial how to connect lux algo with 3commas?
thenkyou
Hello, what is the most recommended exit in a buy operation: when the indicator shows an X exit, or when it shows a sell signal?
Above means bullish and below means bearish
Blue is up trend
Red downtrend
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
What exactly do you mean? 😊
I wanted to know if it is better to close the trade when the indicator shows an X, or when it shows a sell signal. I've noticed that sometimes the indicator shows an X to exit the trade, but a continuation of the uptrend can happen.
like this
what is most recommended? exit on X or sell signal?
Oh always an x
x will always come before
Waiting for conf signals or using them as entries and exits normally isn't the best approach there
Hi, where to find information on backtesting the Lux Algo?
We make indicators and don't currently make strategies so any backtesting would depend on the strategy you design
If I am new to trading, and I use Lux algo premium on my chart for 15m, how do I know I will be profitable or not?
You are the trader 🙂
We make indicators
If you blindly use buy/sell signals chances are it won't end well
If you analyse your charts
and use features to look at markets
you can become a better trader
Ok then I purchased it for wrong reasons
You thought we sold a money printer? 😦 These don't exist
It's on page one of our docs
I am not good with chart analysis thats why I purchased it
It's designed to help with that
exactly
But it's not designed to be 0 effort of course 🙂
You can open the indicators
and use them; they are very simple to use
Fair enough, I am not blaming you guys, My english isnt that great + I misunderstood
It does help with chart analysis 🙂
Can you guys help newbies like me to help design a simple strategy that we can make ( using your inidcators) to be a profitable trader
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
Have you seen ^
most of them I have, now, Let me open this one and check
thank you, this will enclourage me to become your loyal customer
IF I can find something that works for me
Thank you, love the way you guys help, you are good+ humble
Watching the video now
A pleasure 😄
Hi i have a question regarding the alarms. I´ve done the same things, that you mentioned in your tutorial, but did´nt got the alarm - should i delete the alarm and do the same ?
Do you have a screenshot of the settings you used?
Did you just tick the boxes?
or did you actualy create the alert?
Hi, I watched the video, it was very informative, I made the same mistake which was explained in the video, sell signal means sell and buy means buy, but now I understand there is more to it, I will practice this on 100 trades and will come back to you If we can improve more, also I was recommend by you yesterday to use 15m chart, but I see that you guys are using 30m chart, Does it matter which time frame I should follow?
Sure. Please let me know when it's fixed
I am comfortable with all time frames as long as they have an edge personally
Try and stick with higher timeframes 🙂
thank you.
iam also new and i had some good trades on the 5min chart - but dou you prefer 15min ?
I'm also using 5 minutes. But I am thinking of changing it to 15 minutes, to better filter the strong volatilities of the very short term.
okay thank you - thats the same thing i also thinked about - what is a good sum of money for the first trades?
I learned that 70% is managing your money, and 30% is technical analysis. Think about it. Don't put money from your accounts in operations, just put the sandwich or pizza money. 😉
It’ll change when the market opens @ 9:30
This is a trading session as Jbartram mentioned
You can't change that
A trading session happens when it happens
Okay thanks
On the MTF when I enable autopilot , does this feature mean that I dont have to manually change the signals sensitivity for different timeframes and auto does it?
Okay that is wonderful. Thanks
I subscribed to Lux Algo yesterday. I would like to learn the 3 premium indicators and all the other indicators that is offered. Where do I start? Thanks
I want to have a better understanding of the indicators and how to use them
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
@topaz moss 😎
Is this the updated version
Updated?
Yes you said for a few days ago that you're working on updating the documentation
Or maybe is was smack
Updated which part? I think I remember you wanted a part done
Maybe I just misunderstood, I thought it would come an updated document version for V5 suite
Great thank you so much! @indigo cradle
There already is 😎
It's all updated
Webhooks
I just tired of explaining everything for my friends and their friends.
People are so lazy today
Hi.. is it possible to set alert on 1 minute time frame only for the exit sell?!
It is 😎
Actually tonight myself and smack are writing a full guide on that
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
Here is how to set alerts
You'd simply go the 1m
Go to create alert
Select exit
Done
Perfect..but this works for all coins?! All togheter?! Like a screening of all coins?! Or works just for one?!
Just one at a time
Ok thanks
Under Popular Strategies, We have EQ Cloud Strategy, in which Green and Red arrows are shown, In real time chart when I apply EQ Cloud, I cannot see red or Green arrows, am I doing something wrong?
Do you have a screenshot
Thanks 🙏
hello- where can i find the pattern detection?
In the SR & Patterns Premium toolkit :)
They are enabled by default
what does lux volatilty mean
The volatility of the market at a given time
i have a question - when i turn on auopilot on the 2h chart for xrp the autopilot dont show sell. but when i enter the optibot settings and look for the alerts - you say sell. which one is the best
?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
This page explains 🙂
whats MTF stand for in dashboard?
multi time frame
gochta - also, if i setup alerts and then change the setting in lux algo prem, would those alerts be impacted? i.e., i setup alerts with autopilot on, but then i just turned it off to tune with optibot settings just for the next hour, would alerts be triggered based on current dashboard settings which is "autopilot" = off and with the current new sens. and agil. for the current coin im viewing? I got a bunch of alerts for many coins that were setup based on autopilot ON
The alert will use the settings used at the time of setting
so changing that won't have an impact
okay great, thanks!!! btw - the optibot settings are not relevant when using Heiken candles as I can see the suggested sensitivity changes between normal candles and heiken - which makes sense! - any way to calculate an equivalent by any chance?
Not for HA sadly at the moment 😦
No worries! autopilot would still work normally though right? its all a ratio no?
That will do 🙂
Yeah perfect, thanks alot gecko
hello there! do you know which is the best volatility indicator now on the new version? it used to be in the lux metric but i cant find it now. maybe the ultimate rsi?
@indigo cradle
how to determin what range filter is good?
any documentation explain each numbers 1-5?
Range filter?
What setting are recommended for swing trade, buy and sell within 2-3 days
yes
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
What numbers 1-5?
Oh so 10 means longer term
got it
1 is very short term
Can i change my TRADINGVIEW email which was registered on LUX ALGO PREMIUM ?
Does optibot work for perpetual future contacts
hi, does anyone knows where can the Volatility metric be found in lux algo now?
sorry for my garbage english
Thanks
Hello, I have completed the registration and purchase, and added an indicator in tradingview, but the indicator has an error
@feral lava
Hey @violet epoch - try refreshing
What is the name of the indicator that shows institutional buying and selling?
Then load up TradingView again, it should appear in your Invite-Only scripts folder
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Lux Algo Oscillators Premium —> Advanced Mode
This one?
Do I have to change anything to get the advanced mode?
Changed the type to Advanced
thank you
How come it gave me a buy signal while being pretty up already instead of a bit earlier? New to trading so sorry for the noob questions. Got my settings set up just as shown in #800747939226976266
yep there it is, orange bars represent an estimate of institutional activity
Looks good to me, those are Confirmation Signals
If you want earlier signals try enabling Contrarian signals from the settings under Signal Mode
Thanks. So i think i can learn more about this indicator under the guides? Going to begin reading it today
Use the side panel (left) or the search bar (right) to navigate our docs.---
Thanks, I'll try it out.
It shows you should have access
how can i set it up on trading view
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
The area that you underlined, if you would had taken that BUY, the trade would had been chop sideways for about 15-18 bars, most likely will scare you out of the trade and close. For the Lux Buy signal you circled, look at the bars after, straight up hard for 3 bars hitting reversal band for quick exit. Perfect set up imho - also try to turn on trend chaser/catcher, maybe that will give you a clearer picture
so trading at 5 min and getting a BUY signal than the up trend will most likely only last a few candles? compared to lets say a 4 hour chart?
most likely, yes. shorter TF, typically, shorter trade, typically....
read @keen warren strategy on his 5min, he is in and out everyday, stress free and he is done for the day in matter of minutes, most times.
Anyone know a fix for this?
@vale salmon You got a clue?
the dashboard being the open indicator tab right?
Same
@indigo cradle did that but didnt fixed it
being the dashboard location settings
to none
does this happen on other timeframes
Yea all of em
Just this asset?
i got it 👌
Hello, can anybody tell me how to add the taki - ashi candles?
that is exactly what i am doing and I can't find the indicator on trading view
Add it to faves 🙂
The Lux Algo Premium indicator allows displaying custom candlesticks on your charts. These aim to remove the noise from a regular candlestick chart, thus making your analysis easier.
The color of each candlestick method is determined by the method selected in the Candle Coloring setting. When None is selected in the Candle Coloring setting the ...
thank you friendly admin
@shrewd ingot thanks for ur assistance!
Gday everyone! Can someone please direct me how i can get more buys and sell signal... I brought the sensitivity to 5 according to Lux Algo but all day i only receive 1 buy and 1 sell
you can also lower th agility setting within the advanced settings 🙂
Mother F***** lol just joking. 🤣
How can we upgrade our subscription with crypto?
I don't see the crypto option on chargebee portal
Hi, @vale salmon! In the last version of Lux Algo, was there an alert you could set for pattern changes? Maybe I dreamed that, but I don't think I did. Is that feature still available? If it is, where is it located? Thanks!
Hey @acoustic lark looking into this for u 🙂
In the Lux SR & Pattern premium the alert condition is already implemented within the 'any alert() function call', hope this helps 🙂
Could any admin tell me which timeframe is used in this strategy I saw in LUX youtube channel??
I believe it’s the 30m timeframe @vernal sky 🙂
Hello, is there a way to change the colors in the oscillator premium advanced?
unfortunately not due to certain features impeding changing plot colors, we are working on ways to fix this 🙂
Help! how do i set this in tradingview? I can not find it
Is Lux profile the same as this indicator shown on this video:
In this video I show a nice method to identify supply/demand zones on your chart making use of the predictive ranges and institutional profile. This gives a good indication of where institutions may have their orders located. Make sure to leave a like & subscribe for more trading strategy videos!
Get access to Lux Algo indicators: https://luxal...
It's not but it can be used as a replacement 😊
You want heikin ashi candles?
New to Lux and trading view, Is there a way to setup notification like if there is a strong buy / strong sell on TSLA get notified?
Welcome 😊
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
@indigo cradle How do the lux commands work?
For LuxBot?
yeah 😄
LuxBot is a practical Discord bot allowing users to display charts, get news, and even perform backtests by using simple slash commands. Commands can be accessed by typing / on a supported channel. Commands have the following form:
I was trying to have a look at btc but it didn't work
Yeah It worked out now thx
is it ok if i change discord accounts to join this server
You want to switch?
Give support@luxalgo.com an email and they can swap 😊
May I ask how long it will take for a response from lux algo support?
A few hours 😊
It woud be NICE to have SMS or "What's up" messaging system. (I prefer What's up), send us and ALERT signal.
What's up is FREE, I TRADE Options with https://app.plus500.com/ I am missing out on TRADES, away from my SCREEN from time to time.
Start trading with Plus500™ platform: CFDs on Shares, Forex, Commodities, Indices. Fast and efficient trading. Free demo account.
Would be nice to have What's up messaging system, trading accessible via APP.
TradingView can send SMS alerts 😊
Hi, I have created a chart with my trendlines and added lux algo in it.. Can I share that chart with my community? And it will not revoke my license right?
Ok tha ks
hello, can we share the charts and entries that we took today? Would be possible for you guys to check our charts and help us learn?
or any other channel here where we can post our entries and some senior members or admins can help?
Refresh page 🙂
We can absolutely check charts 😊
Sir I followed and paid for premium
thanks
But still iam not available with the premium
No indicator on trading view is showing up when I use Lux algo premium
And tells to follow as for I have followed an hour ago
Have you connected your accounts?
My entry today
I have marked the reason for entry
this is my profit for today, it went all the way upto 5000, but then 1 candle wiped off all the gains
I did not have confluence to hold the trade, since the closing was above the breakout zone
this is real time picture of my trading account
hi im new here, just wondering where can i see what other strategies that is being used by other member? or the popular ones?
how can we setup on trading view
!Guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
😊
@indigo cradle please share your feedback
What was the reason behind your trade?
Weakness at high , Double Top present, break of pattern ( M)
I have already exited the trade since the closing was above the breakout zone and the bullish candle was very strong
That's a classic retest preparing to dump
this chart gives better reason for entry, I entered after the Sell signal was printed and price started making Lower Highs, then it turned red and then break of first red candle on Lux Algo my entry triggerd
It does not make a difference, that 3 hours of selling was negated in 1 candle and price closed above breakout zone?
Sorry If I have too many questions, but I am learning mind ( the cloud as you can see has not yet turned red)
thanks!
I see this as a classic break and retest; the cloud acts as a resistance here. You can also see a support level that it's testing now. That's some resistance confluence right there
So the break and retest is a classic bearish continuation
Hello a question, signals are repainted? Or how can I make it not repainted
No repaint 🙂
Please share it..
I appreciate the questions.... I am learning even if I already know..
thank you
Friends, some times the Exits don't show up after a confirmation signal. Under what circumstances would this happen and what other signal would you recommend for these situations (as an example you can use SPY today around 12 noon yesterday in the 5 min time frame)
They only appear under specific circumstances but you could use other methods for exits such as using SR or oscillators
Can you elaborate under which circumstances? Would like to know when to expect them and when not
The circumstances are of course proprietary so it's hard to say but they aim to exit you at the top of a move to maximise profits
One more question, does it always reach tp1 or only sometimes?
If it always hit Tp1 it'd be 100% accurate 😉
@indigo cradle noticed the new liquidity heatmap indicator. Does it look at L2 data to come up with this heatmap ? I am trying to understand what is the source of this heatmap and do I need any special data subscription etc for better accuracy etc.
It breaks candles down into the volume from lower timeframe candles 🙂
@indigo cradle please add a divergence signal in the ultimate macd for the oscilator please
even a red or green dot will help
We can look into it 🙂 Advanced mode of course has these in real time
it seems that premium oscillator has changed so much from version 4 to 5. Could you confirm which settings are for legacy mode as mentioned in the video? In new version colors are oposite and it doesn't enter in the reversal zone ever
It hasn't really changed; only the reversal zones were changed to be simple line plots; you can use them the same way. If the osci touches them they are over extended
I wish you could also create the liquidity heatmap using L2 data.
It will be awesome 👏 TV doesn’t have L2 data display so I am not sure if you get access to it and even do it.
Yeah sadly l2 data isn't avail
Hello, is there any tutorial for sr patterns?
SR Mode was removed from our main indicator & repurposed in our 3rd toolkit (previous named Lux Statistics) now called Lux Algo SR & Patterns Premium, here is a full walkthrough of all the features.
This toolkit comes with our all-inclusive membership, get instant access at https://luxalgo.com
Full overview in our docs: https://docs.luxalgo.c...
yessir @winter kestrel
Thanks!
I learned a lot thanks! Regarding **AI QUANT PIVOT **is there anything in the documentation or videos? I have not found anything
What is that?
this one
That ain't ours
ooh
No idea what that is 😂
But if it says AI in the title run away from it hahaha
What new one?
All information on it is in the script description
If you click the link
scroll down
Still nothing in the docs? 😮
full explination
Oh ok I understand thank you very much!
explanation *****
Banned.
hello admin, i am still playing with the settings, what would be optimal settings for a 5 min timeframe if i dont want too many signals but the most apt ones covering the peaks and valleys of a range?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Have you seen ^
waiting for u to make another strategy video for the new v5 🤩
Same here, haven't really dived into using heatmap, would you say it is fair to assume that if volume is decreasing when a candle is green (so the heat displayed from bottom to top should be: yellow -> light purple -> dark purple) then it means the buying pressure overall is decreasing and should beware of longing? same just vice versa for red candle? Is this the use case for this heatmap indicator?
Or how would you recommend using this heat map indicator? Any guidelines?
Do you guys reccommend any specific add ons when trading with one of the preset trading styles. Like if i am trend trading for example, will it add the indicator overlays that are listed below it in the settings without me adding them or would it just double up on the indicator? Also, when scalp trading with the preset, would we have to also change the autopilot length to short term? Or is that just preferential based on how long of a scalp you are looking to take.
I am abit confused with all this, what is the recommended indicators for succesful trading? I got lux i got rsi and i got volume on trading view what am i missing?
Liquid profile can be used for support and resistance?
Yes @fringe birch the 2 levels you can use as SR zones 🙂 both are different
Sorry, i meant the liquid pivots , the green and red line can serve as resistance and support?
Ok thanks
?
They sent me that too, I blocked this guy
these guys are not bored
Will it ever be brought back, really thought it was still available haha
does anybody ever trade on a 1D chart?
guys which the best Signals Sensitivity ?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
does MTFs update in real time? if watching one frame, does it forsure show real time signals of the other timeframes?
It will indeed
@jaunty perch - dming with a purpouse of selling the course
damn im good
Gecko you've got a fan, and he/she's very impatient, I don't like that
Question about Advanced bullish/bearish Divergence alerts found within algo toolkit. Is there an explanation of what exactly its predicting and based on what system?
What is advanced divergences etc I guess.!
Is that what you were looking for ? https://docs.luxalgo.com/lux-algo-premium-indicators/lux-oscillator-premium/advanced
banned the course seller @jaunty perch thx
NOTE : that's not our gecko guys 🤭
Hi There, i just bought the quarterly LuxAlgo and connect it to my account..How long does it take before I can see the Lux Algo indicator? Thanks
I like this
Lux Algo beneficiary services
Ser make this
LMFAO

Welcome 🙂 once you link your tradingview username you should receive access instantly, refresh the page and see in your invite only scripts 🙂
welcome aboard!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Everyone..yup2 it works now! 🙂 GM from Malaysia
Hi, Not sure if this is the right place to ask, but I started using trading view after it was recommended by LUX on you tube, I am facing an issue with Trading view, that Smaller time frame markings are visible on Higher time Frame, Is it possible to fix that? As per my understanding Higher time frame studies should be visible on Smaller time frame and not the other way around
Do you have a screenshot? ☺️
Hi I'm new to lux algo, basically just starting today - can I know where to find tutorials or instructions on how to use these indicators please
Welcome 🙂 Our documentation page will help you get you started for sure https://docs.luxalgo.com/getting-started/what-is-lux-algo 🙂
Thanks @shy relic
what does smart money mean
It's the percentage of volume that is deemed to be coming from larger players
Can you advise is there an optbot for the 1 day chart. thanks for taking time to read and reply.
There isn't currently as it'd update so slowly. New settings would take months to appear
so if its red next to smart money the big players are all selling? most of them?
Red?
It's not a colored cell
It won't mention direction really
That needs to be deduced via other methods
oh okay
Hi guys how are you all? I finally put my trader in backtest, but i have a problem. I setted every signals clearly and i'm pretty sure they alert me correcty. But, yesterday happened a very strange thing.
BTC 1h candles, on the graphic i got an Exit text, and meanwhile i got a Strong Buy Alert. Everything happend at 2 P.M. in Italy.
Any clue about what could have happened?
Here are the screenshots
the second image are exported alerts from tv
let me know if you need other informations
yes I guess I have to attach both of them for your reference
this is 5m ( Just an example)
this is 15m
I use to work on amibroker, and they had an option that we could select what marking would be visible on which time frames
So for example I can set it as, 5m markings should NOT be visible on 15m, 30m, 45m, 1 Hour and so on
But markings on Hourly should be visible on 15
in trading view all markings of 5m are visible on hourly and even daily, which makes it difficult to trade multi time frames, I hope I make sense
I am new to lux algo what the perfect time frame and setting for day trading
Hi, this is the Daily chart, why are the candles showing red in the highlighted yellow areas when those were rallies and the candles should be Green? Do I need to make any changes in my settings?
Is there a way for lux algo to push notification on strong buy signals?
yes, you can set an alert with the confirmation strong buy condition and be notified trough the tradingview app 🙂
this is the confirmation candle coloring, it allows filtering out unconfirmed trends, you can disable them in the settings 🙂 See https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/candle-coloring/ for more info
Welcome 🙂 There isn't a perfect, it really depends on the trends you want to trade, if you want to trade longer term trends that might last up to weeks you might want to use higher timeframes.
Ok example If I am using the 15min timeframe what setting I should use in the lux algo premium
I quess it depends on your personality as well which timeframes you like to trade. Lower timeframes needs faster execution than higher timeframes
you could see in #797529919499272224 to get optimal signal settings, use the recommended sensitivity on the dashboard, or use autopilot, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings for more info 🙂
Thanks. I have the following settings, the candles are on confirmation simple. My question was why are the candles red when they should be green? Is it because the overall trend is red on the daily timeframe?
candle coloring is directly based on the confirmation signals, in that rally/retracement you are in a sell signal, the trend has been fairly developing, and as such the algorithm does not judge this variation as a confirmed trend, lower your settings if you want the algorithm to catch these specific variations 🙂
anyone guys?
Are there any alerts for candle color change @indigo cradle
There are 🙂
Normal turn strong
Are for purple to red
or purple to green
Can you point me to documentation. I don't them while creating alerts in dropdown
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Is it same as Confirmation Strong Buy
Can you share an example on how to set such alerts
Okay thanks
What does the B stand for?
Got it. After that do i have set the plots in alerts message to catch these type
on the live bot crypto and stocks scanner can we choose to only have like 4h or 1D ?
Could you please tell me what this x means in Lux Algo premium.
standing on documentation should mean exit sell/buy
Perfect so if on a Sell signal this would mean close the position.
yes, in short
i think it would also mean u can partial book profits
sometimes you will get multiple x
Thank you so much.
@indigo cradle did you see the screen shot?
It’s a “break” signal for using our Support & Resistance Levels with Breaks indicator
Okay thanks
Is there a way to hide the indicator at the top of the screen so the candles are better visible?
tap the top-pointing arrow on the left
Oh my God that was such a quick fix! Thanks @opal birch
can u please show me how did u fix it
i still cant find the arrow
I see different numbers on the right of the screen. I am not sure what these are, do they hold any significance or can these be removed and only the price of the stock be kept? If so how to do that?
@frozen dome See the small arrow click on that
Maybe thats coz you are using only 1 indicator? I dont know. I had 2 in there
ok yes could be
np, glad i could help
Ok, nevermind for the last question i asked. I see noone is gonna help me. I'm going to ask another question: Is there a way to retrieve a list of pattern detection that the algorithm is capable to recognize?
these are scale labels, you can disable them by right clicking on the chart scale, then going to labels, then deselecting indicator and financial value labels as well as countdown to bar close
Okay great thanks. This is much better now. I can finally see what the price is 🤗
I set up alerts on all my Tickers. I see that the alerts came in later than the time the signals appeared on the charts. Do I have to change anything in my alerts so it can instantly alert me when the signals turn on?
if you have set it using once per bar close then it will alert you once a signal is confirmed, which is the best way to do it, if you want an alert the first time a signal appear you would need to use once per bar
This is how I have it. I dont see the once per bar...
For the any alert it's once per bar close by default
Cannot be changed
@jaunty perch welcome back 🥰
woopsies! @indigo cradle ❤️
question.. so if im watching like 2 charts for eth and btc do i have to adjust the optimal sensitivity everytime? and also for different timeframe, again adjust the sensitivity?
but from the video the discord one is more recommended ?
You would need to adjust yes if using optibot
@bronze ginkgo promoting discord server via dms
Need some clarifications to the confirmation simple mode:
When it is said that green means strong buy active and red means strong sell active, is there any difference between 1 and 2 (2nd screenshot - both are the 1st green candle transitioning from purple, 1 has strong buy label but 2 doesnt have any)
They would be equally valid as strong signals 😎
got it, curious why we dont see 2 showing strong label?
because there wasn't a sell signal yet and the candles can switch between strong --> normal --> back to strong while still on a "buy" signal
candle coloring helps you see when trends might be getting weak, can give you an earlier indication of a reversal at times
So a weak or strong label only appears when it was NOT in the same status beforehand? (that candle 1 with strong buy was previously followed by purple candle which was following a red "sell" candle happened before)?
Yep exactly; it behaves like a trailing stop
Buy/sell/buy/sell
The the candles allow for re-entries
Need help paying my subscription with crypto
Hey @meager elk are you on the yearly plan?
Trying to switch from monthly to lifetime
Ok - for crypto payments you can't get prorated charges, so you'd have to purchase outright on here: https://sync.luxalgo.com/app/lifetime/
We accept Bitcoin, Ethereum, USD Coin, and more to pay yearly with cryptocurrency.
is there troubles when trying to pay?
prorated charge would only be like around $30 off, so essentially same price
can i dm?
sure!
@feral lava there's a guy pretending to be Gecko, he's sending link to a site, apparently luxalgo.com, but I'm sure it redirects you somewhere else if you actually click on the link, he is saying "we only accept crypto" as other methods are not available at the moment. Charging for lifetime/997$ in USDT. He is dming first and I am pretty sure he finds people in general chat. Nobody from lux team will ever text you first asking to send crypto for payment, don't fall for it
Yeaaaa there’s so many it’s uncontrollable really, we just advise ppl turn off their DMs
We actively ban them whenever we spot them, but yea… just too many / no solution to actually stop them
It’s a Discord issue
Omg. Plz help. I dont't understand how can i made profit with Lux premium main signal... Before start trading with it I saw guides on official youtube channel. Devs help plz) Advise me plz trading strategy or another guides plz. I'm noob🥲
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
@warm lintel ^ watch this & other tutorials on our youtube
I know I'll let you guys know when something like that happens so the main/active ones are gone, @indigo cradle#6718 is the guy
f*ck its not the founder lol, his # is 6718 and name is Gecko
👍👍👍
Hello! i need some help.
How can I program alarms for the indicator 'Linear regression Histogram'?
I would like to know (alarm) when it is in a specific line of histogram
This indicator:
They are lines not plots so you cannot 😦
i have a question about the bot scanner signals, should I also see any signals on my Lux indicators or is it based something totally different?
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
^ awesome
that reminds me - is it a best practice to turn off extended hours while using lux indicators?
Using extended hours will generally show areas of low liquidity - so you can get choppier price action
Hey i need some help, whats the best strategy for luxalgo? 😦
If I want to buy Netflix and I’m using a daily chart, (stock scanner says buy on 1d)
How would I set up the optibot settings? Autopilot or the 4hr optibot inputs?
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
Help! How can I set an alarm in case something like this happens? If this goes the other way 😮
Hmmmm so what are the conditions here you're looking for?
Hello, how can i set alerts on the Unlimited MACD ?
I would like to be alert in case the price goes in the opposite direction so as not to generate losses, the same if it changes to purple color
Is this possible?
You'd want signal line crossing MACD 👍
It'll need to be a bit more specific in the condition but it's not really possible there sadly
Yes
I was wondering; Does that mean that trend might be over if the price is above/below hypertrend? Does the hypertrend work as S&R?
It can absolutely behave as a SR yep
So a cross like that could imply a trend change
Hello, I just checked with my friend that I used her card to pay with, the site has taking money twice for the same payment, I have statement messages from bank to prove it, is there any way we can look at this?
If you email support@luxalgo.com they can check 🙂
Okiii thanks
@indigo cradle Can you help me in setting alerts when candle changes it color. I am able to setup all other alert, but this alert is not getting configured.
For what when it changes colour?
Dear admins @indigo cradle and @feral lava, I am new here as in few days old and have been watching and reading all channels to gain more understanding, knowledge and experience from senior traders. I have noticed and would like to take this opportunity to thank you for being so relentless with supporting us, guiding us, answering our questions 24x7. This is nothing short of phenomenal, i thank you for your efforts in making this community of traders aspiring for financial freedom. ❤️
A pleasure Mr Sandeep and thank you for the kind words ♥️♥️♥️
?
I need clarification on what colour change?
Purple to red?
To green?
Green to red?
i team, i recently joined and i'm getting a study error when adding the lux algo premium and sr & patterns indicators. Can someone help?
Which features do you have enabled?
its currently at default, i havent changed anything yet
Yup
i've tried diff timeframes, pairs and exchanges
i got it working now
i restarted the app and voila
🤝🤝🤝

i gotta give it to the admins here man, you guys are so quick to respond
We are fast 😎
Hello where can I see the patterns?
Pattern detection?
That's in Lux SR and patterns
@indigo cradle optibot is not updating today
hello. im having an issue with alerts in trading view. i have made alerts in the past and worked fine. now, when i try to make one Lux does not show up in the dropdown.
is there a tutorial about Ultimate RSI?
hello...will there be an updated optibot 5min today? thanks
Hi, can you please explain the difference between the exit signals and the buy or sell signals? Thank you.
where can I change the sensitivity
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
@bright onyx
exit signals can help with taking profits
ty
How can I set a signal for the appearance of these oversold or overbought zones. When trying to create an alert, there is only a weak/strong buy/sell signal, detection of divergences and institutional activity
there could be different ways, the one as above could work for the overbought area, you can also use Greater/Lower Than conditions but it will alert you each time there an area is visible.
When do the candles turn green? Is it linked to the Trend Catcher and the Trend Tracer? Which one of those needs to turn green for the candles to turn green?
which one is more accurate, Trend Tracer or Trend Catcher
different uses
Trend Tracer is more longer term trends, Trend Catcher does the same but actually attempts to predict them super early
@indigo cradle @feral lava My alert function is not working it doesn't give any notification on anything even when i'm on tradingview. Please help
Hi. For trading ES futures what setting would be used? SPX optibot? Thanks
Could I see your settings?
Yep 🙂
thanks
Where to send any requests? In this channel or is there a different way?
requests to Lux Algo
Requests regarding?
Requests regarding Optibot values. So I just now got to know in the stocks chat that its best to use the Optibot values for the 5 mins chart and not the auto pilot. I see only some tickers in the Optibot. I see TQQQ, would it be possible to add SOXL, SPXL and their inverses - SQQQ, SOXS, SPXS?
So with optibot we have a hard limit on the number of tickers. We can see what we can do here though as we do plan to expand it
Okay thanks. Hope that you guys expand to these tickers. I think the folks were right where they mentioned that the Auto Pilot on the 5 min isnt accurate. I tried the values of TQQQ on Auto pilot and with the Optibot values I see a big difference.
Why cant the Autopilot be designed to capture the right values that the Optibot recommends?