#🤝support
1 messages · Page 247 of 1
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
Join our Discord: https://discord.gg/LUX
Get access to Lux Algo: https://luxalgo.com/products/lux-algo
Get the best settings: https://www.youtube.com/watch?v=OmvxpTE9tlw&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Docs and example strategies here 😊
You'll find recommendations for settings in our docs where we discuss optimisation approaches
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Awesome thanks!
Hi, just a quick question, what is the sensitivity and agility for shiba in 30m?
Hi, could you please advise what are small blue and red “x” mean and how to read them? Thanks
Those are exit signals, they can help you with taking profits
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
This Cloud 1 or 2?
how can I create an allergy, provided that the candle closes, for example, below Cloud 1 or above Cloud 2? In this direction
@indigo cradle I usually use trend and catcher signals. But I realize that scheduling the warning after the closed candle is almost always late by default. Is there any other option in traidingview that launches the alert before without this alert being spent or remaining active?
Or This cloud 1 and Cloud 2
@indigo cradle Is there a way for him to let me know just when the color changes? Whenever I check it as I say I am late.
You could use something other than once per bar close
Like once per bar
Top is cloud 2 you can change this in the style settings 😊
I think it should be some other than closed sail (so as not to be late). Any other option for you to warn me and not break the alert?
Those. Is Cloud 2 the tops of the clouds, not the entire rising cloud?
In the settings, I can change the color guides (but it's not entirely clear where which one is responsible for what)
I still don't understand how to create an alert using clouds?
Once per bar could work
You'll want cloud 1 and 2
whats the alert for buy / sell and or strong?
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
I cannot create an allergy, for example, when Cloud 1 and Cloud 2 intersect at once?
In the alerts menu you'd want to select cloud 1 crossing cloud 2 😊
Is it possible for me to create my own strategy using pine script and use Fibs and additional confirmation via Lux Algo indicator ?
I have been trying to figure it out but not successful so far. Please share any videos etc if you have it handy.
@indigo cradle I just tried and yes... It seems that now we arrive on time or before the change of color or trend is drawn. But now the notifications are repeated.
I think the only option would be to check the option 1 time only. And then manually restart the exhausted or worn alarms.
It's not I'm afraid; confluence isn't possible to create automatically
You could use once per bar
I've used that one. But the alarms are repeated every time you fancy a candle.
The only option would be to start the day with the alerts refreshed. Paralyze all alerts when I finish my daily day of traiding. And the next day refresh all of them again.
For that would be the first option I guess.
can we get alerts for the Nadaraya-Watson when it changes green/red
or is there anyway you can help me get notifications for when it changes direction on one hour charts
There isn't I'm afraid; it repaints
Hi, can we get alerts when a pattern is found/changed?
Sheeeei
Thats annoying
Are you planning on trying to have something for it in the future
Any options do you suggest ? I see that you mentioned “automatically” which led me to believe that there is a way to do it but not straight forward. I am okay to try difficult path as long as it is possible.
Currently no I'm afraid but in the near future 😊
We don't for now due to the repainting. Our channel we released last week has alerts
You'd need to program an implementation on a server and store values of Lux in a database
At which time frame
Those tickers sadly aren't supported by Optibot currently
Ok thanks bro
How much more dip we can expect for Bitcoin
55k
I think 57500
I am very new into this business, I heard that it will go to 30, what do you guys think
Just purchase premium and every time I try to enable the indicators it prompts me to purchase a Trading View plan. Does this not work with the free version? I thought I read that it did?
It does indeed 😊
Right click your chart
And click remove indicators
Then readd Lux
The free plan limits you to 3 indicators added to a chart at a time
THANK YOU! That worked!
I have TradingView premium plan with less than 1 min charts. I would like to be responsive on my buy and sell alerts so which interval do you recommend ? 15 second or even less for a volatile stock.
We normally don't recommend anything less than the 15m so anything regarding seconds is really not something we can provide tips on
Oh I was not aware of it. Are you saying even 1 minute for day trading is not recommended ?
Not at all; unless you're majorly succesful on it already it's incredibly hard to trade
Frictional costs make it almost impossible for most
Overtrading
Second guessing
Hi, I am new both to Trading View and Lux Algo (I have subscribed an hour ago). I have a little issue. On the Connect Accounts page I have registered “Roman111” for both Discord and Trading View. I thought I am creating an account through that page. Anyway, I had to set an account for trading view and the username “Roman111” was taken so I created another one “Roman100100” but it hit me that I have registered to someone else’s account. Could you help me solve the problem?
Welcome 🙂 Give support@luxalgo.com an email with your new username and they'll change this over for you
And do I understand it right that once the username will be changed to the one of my Trading View account I will get the Lux Algo indicators?
Absolutely yep 🙂
Alright, thank you.
I do trade stocks (crypto rarely but would get into it soon). I use the morning 9:30 am time to trade good momentum stocks and tried lux algo on 1 min chart. It was good for most part.
I am wondering if day trading is not one of the use case for luxalgo and if that would be considered for future
It is absolutely a use case
Just as a general rule for anyone asking for timeframe advice however
No matter the indicator
Going sub 15 is getting trickier
Going sub 5 and the odds are stacked against most traders
And sub 1 it's... well, impossible for most
Hmm then I am confused. You mentioned that 15 min is the minimum I should configure but can I not use luxalgo for 1 min chart ? Sorry if I am asking some stupid questions. Recently subscribed so trying to find all nitty gritty details. Thx for your patience
No worries about the questions 😊 it's not Lux specific advice here. A trader who can trade low timeframes such as the 1m successfully before Lux should of course keep doing that
But in general trading those ultra low timeframes isn't a good idea unless you're extremely experienced and successful on them
Lux can be used on any timeframe
From the 1 second to the 1M
Oh that’s good to know. Gives me good comfort feeling that I could use it for lower timeframes.
I have been doing day trading for some time and hoping Luxalgo would both improve my accuracy and sometimes I exit sooner so it would even boost my profits
Absolutely, any timeframe can be used 😊
Wonderful. I will share my results to you then on how it performs on lower timeframes.
Hi guys can someone point me in the right direction! I’m new to lux algo Indicators but I’m unsure on how to use them is there a training video to help understand the indicators?
Well of course lower timeframes are extremely human based and will be 90% your ability there
We have full docs
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
Join our Discord: https://discord.gg/LUX
Get access to Lux Algo: https://luxalgo.com/products/lux-algo
Get the best settings: https://www.youtube.com/watch?v=OmvxpTE9tlw&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Hope those help 👍
Thank you
i get a pop alert in TV but when i go to the log i cant see it...anyway to fix that?
I'm not too sure: all triggered alerts should normally go there, have you tried remaking the alert?
On 15 sec timeframe. Also, trying it on 1 minute timeframe.
quick question is there a way either through TV or through the indicator to get specific signals such as a buy but only when the candles turn green and not purple?
not sure if im making sense ....
Normal turn strong is when candle turn from purple to green
so if i only want alerts for sells that are red or buys that are green i have to specify strong?
Correct yep 🙂
awesome
In Lux Algo Oscilator, in Legacy mode how can set alert that the momentum is going down? (switching from blue to red). Is it Classic Oscilator Sell?
You'd want legacy main crossing legacy trigger 🙂
Fyr
it will go to 30 ...its matter of when
Can I combine several parameters in lux algo to create a buy or sell alert automatically when several of the conditions are met ?
Example: I want to have buy alert when Strong Buy but filter out or ignore if the oscillator is not green and then take profit using trend catcher.
Yes
How ?
Hi i tried contacting the support email for the refund and they saying 30 day policy and i opened my account 9 oct 2021 can u olease take a look and fix the the thing for me
Hi @foggy glacier yes no problem, DM’ing you!
I'm a bit confused with setting alerts on trading view for Lux Algo signals. For example I am setting an alert on BTC 1h timeframe with sensitivity 39 and agility 33. Then I set another alert on the same timeframe but different sensitivity and agility inputs, do i get different alerts as well? how about setting alerts on autopilot sensitivity. I am just curious how the alerts are effected? Thanks for your help...
thank you
Alerts are always based on the settings used during their creation, if you change settings after creating an alert it won't affect that alert. Settings alerts when using autopilot would just alert you on the signals displayed when using autopilot.
This video showcases a simple and easy to follow strategy on BTCUSD 30m using Lux Algo. Just a few simple features are used here however they perform excellently in a backtest.
Make sure to leave a like & subscribe for more trading strategy videos! Get access to Lux Algo indicators: https://luxalgo.com/
Lux Algo features used in this strategy:...
I see here that someone is able to combine multiple indicators and create strategy and even backtest it as well. I want to be able to do the same. How was this possible with LuxAlgo and can you guide how I could combine and create a compound alert ?
Is this TradingView or LuxAlgo limitation ? I would think that it is common practice to get multiple confirmations to trigger a buy or sell signal. Can you consider ability to choose multiple parameters for alert condition ?
This is a TradingView limitation sadly
For example you couldn't set an alert for if RSI over x and price above MA without programming
I have done that kind of programming earlier so I am okay to do pinescript programming. I was able to get alert with RSI crossover at 30 and MACD crossover within certain candles.
If you can share procedure on how to leverage LuxAlgo indicators on my own own strategy then it would solve my issue of combining public indicators with lux algo indicators.
Certain plots aren't really available currently so combining indicators without code in TradingView is a tricky one
I am sure you are working with TV to fix this limitation. In the meantime, if possible kindly create a combination indicator to set alert with multiple confirmations as well from your code. I am hoping that part is in your control.
In specific which plots are you wanting to use? Signals? Oscillator ect?
I am trying to do the following:
If I get strong, then I am looking at oscillator to see that I am in green zone or about to turn to green. I am also looking at trend catcher to see that trend is not flat and green and going up.
I am also looking at trend reversal zones to see that for buy I am closer to lower band
I am not trying to be over complicated here but attempting to get double or triple confirmation so that I only pick quality trades and improve my accuracy
many thanks!
question about Lux Algo Statistics: In the Pivot Oscilator I see some dotted lines at the end. I read the doc that it is for forecasting. forcasting I understood was about seeing into the future. Like trying to predict what is about to happend.
But when I check I can see that the forecast is already in the history. All other indicators indicate what happend during period. Why forcast what might happend when it has already happend?
Think I have misunderstood something here
Look at this as an example trade. For buy, it did meet all my criteria but I was little slow in detecting and reacting but if it is automated then I could use alerts to have more precise entry and exits.
The forecasts job is to predict a real time pivot location really. If you see the forecast go from green to red at the top for example that can suggest the location of a new pivot
Understood will explore possible avenues 🤝
Thank you so much. Looking forward to working with you to achieve it.
I dont understand it. But I will study your image and see if I understand it
thank you I need to think (re-read doc and see if I can find a guide on youtube about it)
👍 me 2
heya guys can anyone help me :3
hey everyone i clicked a fake nitro link from here and got my account hacked please be careful with the links
How can I help? 😊
Its about the sensitivity from luxalgo. Every timeframe has its own recommended sensitivity right. Why is the autopilot having another sensi? when i turn it on the signals are getting changed. Shouldnt the autopilot use the recommended sensi?
and the real question is, which is more accurate, autopilot or recommended sensi
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
This article should help answer all of that 😊
thank you
hi, do know someone how i connect my my binance account with trading view pro account?
You can't I'm afraid currently
or how can i implement this lux indi in the binance platform?
hello, does anyone know why the lux oscillator indicator can show institutional activity on the 3 min chart, but not on the 1 min chart? what can that mean when it happens?
Different timeframes have different data so can reveal different information
Regarding Institional profile, is the data based on things in the past or is it based on Lex Algo going back into the order book and check what the institutions are currently doing?
Ahh it is based on the 200 last bars...
It won't be on the actual order book more based on volume analysis
I see but wonder how institional profiles can help me with my analyses. Knowing that many institions sold at a specific level in the past isnt't helping me I guess.
It can be as support and resistance levels can be derived from areas in the markets that insititutions appear to have interest in
Hi I can't get Lux to connect to my Trading view. I replied to the email should I just wait?
I tried connecting and have used the one time password multipel times
Hi there, support shall ensure this is done quickly
what does this do in the lux statistics pivot oscillator?
coudnt find anything about this in the docs
gotcha thx
whats the reason on that? any idea?
Odd; I'd suggest remaking that alert. When you make the alert ensure only the signals are enabled and disable other features
just done.... seems ok for now
How will I get a notification if there's a BUY or SELL indicators?
You can by setting an alert, see https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
hello, are there any optibot settings for Dollar index DXY?
Currently not I'm afraid for now
Hi everyone! I am new with Lux algo and I have a question, why I don't receive exit signs all the times? sometimes we have exit signal sometimes not. Thanks for your help. 😀
They won't always appear 🙂 Only if the conditions are correct
ok!
can a signal only appear when a candle starts/ends or can it pop up any time?
A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.
Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".
thanks mate
Why is it I get study not authorized when I try to put the Lux algo indicator on? I believe I linked everything properly.
Try refreshing your page 🙂
what does it mean the blue X in the chart?
An exit long
Can I used it or just wait for the next SELL SIgnal?, it is my desition?
It's always your decision 🙂
how can I post screenshots in this group? I have a question that is easy to describe with a picture, and take many words to explain if done by words...
You can paste it in here 🙂
Oh, I see
Question about forcast, see picture 👍
I'm still a little confused what you mean here?
You're saying the sell signal came before?
I'm confused of the forcast, at the bottom of the screen it says the time is 18:00 - 21:00, which I thought mean that this time is used for all indicators. But to me it looks like the Pivot Oscilator trying to forcast something that already had happend.
With happend I mean I see on the other indicators and they shows what happend. But the dotted lines at the end of the Pivot Oscilator shows the forcast and it is that which confuses me. I'm surely misunderstood something completly 🙂
It is a very unique forecast so totally understand the confusion here @cosmic imp
Essentially it aims to help you spot potential pivot highs/lows in real time
Not forecasting them in the future, but spotting real time pivots based on the dotted ‘forecast’ that are then confirmed and permanent in the future
It can be a good indication if the pivot oscillator dotted forecast has a change in color at a place you may suspect is a pivot high or low
I have created alerts. I created them at the same time with the same settings on different pairs. Some work fine. However, some alert when there is no need to and some miss.
I have not changed any setting since creating the alerts.
You are using "any alert() function call" ? It seems you have been alerted for a normal buy turn strong, which is highlighted by a purple candle becoming green.
As per the photo above. The purple candle did not turn green.
If you did not change the settings after creating the alert then I would suggest remaking it, but in general this should be the only issue in such scenarios.
I’ve made 150 alerts with the same ‘autopilot’ settings. I don’t really want to delete them all and redo them. I already did that once following advice from Gecko. These new alerts still miss fire.
It's strange. The conditions are of course identical to the conditions for an alert to be triggered. Could I get a screenshot of all your alert settings?
I’ve DM’d you 👍🏼
Hello support, I am unable to load my indicators on trading view mobile
how frequent are the 15m bot updated ?
Monday and Wednesday 🙂
Thank you
Hi there; if you have access on your computer and not mobile ensure you're logged into the same account
Can I say, the optimization value remains almost or around after those update
Does this seem right? This means i will need to hold long since almost oct 20. Seems too long ago.
This strategy is only really for educational purposes, I would recommend you use it at all
It's based off the moon, you can't force the moon to become full or new any faster naturally
Gotcha
Hey quick question is there a way to have the also give a alert when a patern gets detected ?
Currently not I'm afraid but it's something we want to add soon ☺️
it would be nice to have it alert when nearing support and resistance
Also when you have the autopilot on does that also manipulate the agility
When you have AP on you don't need to touch either 👍
@indigo cradle Hi there, Do you have a video that explains the pivots High /Low Analysis & Forecast Indicator. Thanks
On the Occlilator .. what is the recommended value for length
Currently not one in depth
Default but you can adjust it to how you like it best ☺️
OK is there a way to have the pattern detection and support and resistance on at the same tme
or is that a feature that can be added?
It will be great if you guys do one. Please let me know once you have something about it. Thank you
You'd need to load up 2 Lux Algo scripts to do this
Oh nice i didnt know i could do that
Absolutely🤝
Hi, my alerts on luxalgo are not working. i tried in phone navigator and windows app and i cant add but no alert comes
May I see your settings?
i made a miniclip
Could I get screenshots instead?
mmm
any low gas fees erc20 we can use on uniswap?
i dont configure nothing more
Correct 🙂
Yep and then it'll all work 🙂
going to try. ty
do u need trade veiw premium for the black backround?
i hope this isnt a common dumb question BUT
how do i turn on the discord scanner alerts?
hello everyone
I can't pay subscription with my credit cards, do you have paypal option or btc? thank you
@edgy hollow Sadly we don't accept paypal. We only accept crypto for yearly payments
that sounds good
from binance?
Yes you can use binance to send the crypto 🙂
good how can I do it? I'm already 6 days overdue on quarterly subscription
You can see the yearly plan here
If you've connected your accounts refresh your page and re-add 🙂
okay thanks will try
anyone knows about a youtube video explaining in detail how to use the Lux Algo Statstics?
Currently we don't have a dedicated in depth video on this sadly. Just our docs
Could you help me? What is the best oscillator set up for a 30min chart?
I have heard that the best/popular is legacy, right?
Hi @ashen coyote,
Please email support@luxalgo.com for any order enquiries and they will assist on the same day.
Am I correct? I need a tradingview premium account to set up multiple alerts and receive multiple alerts as well?
Yes free plan is only 1 alert i believe
whats the difference between the buy/sell signals and the x signals
Hey @fervent turret it’s TradingView
In the “connect accounts” portal you have the field to enter your username - if you entered & it’s not there try refreshing.
If it’s still not there after refreshing email your TradingView username to support@luxalgo.com
hey admin, do you think you can make a all in one alert for trend catcher/tracer
and include exits in the current all in one alert, that would reduce one extra separate alert for exits
This video showcases a simple and easy to follow strategy on BTCUSD 30m using Lux Algo. Just a few simple features are used here however they perform excellently in a backtest.
Make sure to leave a like & subscribe for more trading strategy videos! Get access to Lux Algo indicators: https://luxalgo.com/
Lux Algo features used in this strategy:...
does this strategy work better on AP or using optibot setitings
This hasn't really be tested too much it depends on market conditions
is the strategy better for trending or ranging markets?
Trending by far 👍
How can I get trading signals?
whats best settings for swing trading ??
How to know if it's a confirmed signal or not, because some time disappeared
!confirmed
A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.
Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".
How do we setup automated discord bots? I have been setting up alerts in TV but cannot find any in discord. Is there a guide to this?
guys is it just me or was the last optibot update on the 28th?
Opt in there ^
They run Monday and Wed 🙂
Oh but yes the 5m; it'll be run soon
Hello Admin, I have a problem with my payment process. The first payment process is cancelled, updating the discount did not work. I then re-entered all the data and went through the process completely. Now I have received 2 confirmation emails. But I don't need 2 subscriptions at the same time. Who can help me?
@sweet ruin Hi there, did you sign up twice then?
apparently yes, it looked like the first payment process was cancelled.
Give support@luxalgo.com an email and they can resolve this 🙂
okay, thanks. 🙂
@indigo cradle Wanchain uses which mainnet on metamask?
I have no idea I'm afraid
What is the best sígnals sensitivity and confirmation signals agility for the stocks market in the time of medium term like one week I saw that the optibot does not have all the data of all the stocks
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Alternative optimisation is listed here ^
how can i tell the bots to send me messages about new signals appeared? 🙂
thats my man
hey there
in the free or paid indicators is there any good volume indicators like a pvt or vfi ?
We provide a nice profile or in our #🆕new-indicators we have a weiss wave post we made earlier this year
perfect will take a look thank you
What mean the X
That's the exit signal
But don’t have to show sell ?
There are blue and red exit signals by default, blue for exit long and red for exit sell.
@indigo cradle please let me know
What is the difference of exit long and exit sell
exit long = close long position
exit sell = close short position
I use these as possible points where I could take some profit. Sell part of the position.
Thank you
What mean the x below
If you follow the previous strong sell confirmation, you may take profit or exit your position
https://docs.luxalgo.com/getting-started/what-is-lux-algo/
Please go through this manual before you trade; otherwise you definitely won't benefit from using Lux
Use the side panel (left) or the search bar (right) to navigate our docs.---
Hello quick question, and a dumb one, but can I change the color of the X (éxit point)
Till how many candles back the nadaraya Easton estimator has chances of repainting
Nadaraya Easton estimator
yep you should be able to within the Style settings of Lux Algo Premium 👍
Just look what’s in light grey color and change that
May i ask which sensitivity the live bot scanners are using? Looks like short term
probably the optibot settings
You'll find these in the video description 👍
That's an exit signal 👍
u mean the livestream on the 15min chart? i mean the discord bots on every timeframe
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Is it possible to connect a broker to the buy and sell signals? So it automaticly buys and sells on the signals? I red you can connect some brokers to tradingview
There are third parties like 3commas that allow this 👍☺️
Oeeew sexy thanks, gonna deep dive
What is the mean for ❌ under the candle?
Hi Gecko, so the alerts I’m receiving do not match charts when ‘autopilot’ switched on.
Normal buy has not turned strong, yet I got an alert.
Turn off autopilot on the same chart -
And this shows why I got the alert.
The alerts are not working with ‘autopilot’.
And you are using any alert() still?
Will be taking a look at this @tranquil warren for you and checking this bug out
Thank you, when I turn off autopilot I can see why the alert activated.
Understood yep
In the Lux settings you'll find candle coloring
Thank you
Hi everyone. Question for you. Any way to get an alert when the Trend Catcher change direction?
In the built in alerts we have trend catcher up and down 🙂
Anyone have support contact for tradingview? many of my alreats pop up but they don't show in alearts history
Hi , I am new to Lux Algo....Is there any link which can let us know Strong buy/Sell signal on basis of 5m/15m/1h/2H/4H/1 day
Use the side panel (left) or the search bar (right) to navigate our docs.---
I mean on discord I was seeing similar link but not seeing know .....what I am missing here
#🔔scanners-premium can help
Full scanners for all active signals / other features should be coming soon in TradingView directly though!
But I was seeing that on Discord of Lux Algo .....somehow not seeing it again ...not sure what I did
That link was exactly showing me Stron buy signal for 1H/2H cahrts
For this I am getting error that I do not have access to the server
could u pls. provide me access to this server
You may have muted it
how to unmute it ?
or could u pls. send me an Invite for this server
You already in
can u find LIVE scanner?
No, I do not see find LIVE Scanner
what am I missing here
right click this channel logo and check if you hide it
no I haven't selected the Hide Muted Channels
follow Smack's instructions then
I did that in view-scanners, I opted for Stocks alerts and it has created a Reaction Roles ...but I still do not see live Scanner
my bad ...I just started seeing live scanner
pls. ignore my earlier response ...Now I am good with live scanner

Hi, India has a new stupid rule for processing Subscription Payments, which has completely broken all subscriptions including Lux. My subscription is supposed to renew next week and I dont think it will. Is there any workaround? I do not want to pay for a year. Maybe quarterly is fine. Looking for help here.
Which is the best S/R value for pattern detection 1H?
So you're unable to use your card?
There isn't really a best however default is a nice middle ground
hey guys i am new here but i don't understand the optibot, what does it mean when the sensitivity and the agility is high or low?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
This page explains the role of the settings ☺️ optibot just provides optimised settings for listed pairs
Here's a quick video on the multiple ways you can adjust signal settings within Lux Algo on TradingView and use Optibot within our Discord. Optibot is backtesting private data with our algorithm, while the auto-confirmation signal settings toggle is just an estimate.
Learn more about Optibot: https://docs.luxalgo.com/getting-started/discord/bo...
Hello, I no longer get any signals displayed. How can I update Lux Premium. TF 4H 19 38
!update
To update Lux Algo Premium indicators, refresh your browser/app, remove the indicator from your chart, and then add it back to your chart + save your chart layout on TradingView.
Full guide: https://docs.luxalgo.com/lux-algo-premium-indicators/how-to-update
Included in this section is the best steps to receive & install updates for Lux Algo on TradingView.
That's what I did. Nevertheless, with the settings of Optobot BTCUSD 19 38 not displayed in the 4H TF.
Do you have a screenshot?
I'm a little confused because in the screenshot I see a signal no?
I see a sell on the 21st
You just don't see any new signals yet as bitcoin 4h is a very trending timeframe
So there hasn't yet been a need for a new signal
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Hello
i bough 1 year, lux algo create for free Nadaraya watson estimator, this is amazing but we could not setup alert on trading view
Sadly not for the Nadarya Watson
i want to setup on trading view buy sell signal what is best time frame with luxAlgo ?
Normally the one you are most familiar with; we tend to recommend higher timeframes
Any confirmation buy for lux algo premium mean Buy signal and Strong Buy signal both ?
It does yep 🙂
Hi guys
Need some help
I put in the wrong username for trading view account. I've already sent an email to support. Do I just wait?
Yep just wait and support will get back to you shortly 🤝
Thank you
2
Yes. Lux will not be able to process pretty much any card issued inside India. I’m a bit worried as I have just 5 more days left.
We do accept crypto for yearly subscriptions if that's an option?
Honestly 1 year is a lot for me as I'm still experimenting with Lux. Would be happy to pay even quarterly if that's an option.
Sadly crypto is only for the yearly plan currently. You may be able to re sign up?
I’d still have to use my Indian card which would not go through since lux charges it as a subscription.
None of the Indian cards can be used on any site right now. Payment processors need to implement a new API which they obviously couldn’t as this was a last minute thing.
Still scrambling to get all my subscriptions. Netflix, hosting, every shit screwed 😵💫
Love these settings! Thank you for that, but are those also auto saved or changing allong when I change timeframes or between stocks?
is it possible to set your own color for lux Oscillator Premium
Ah I see, I'll get back to you on possible options
They will change between the timeframes, they are timeframe specific 👍
Sadly not currently
Thank you!
can we request to have it added 🙂
It's an odd Pinescript limitation but we will look at options for you 👍
What colours would you want to see?
Any success yet?
It'll be patched in the next update; it's a weird bug so thank you for finding it
I just closed TW app and restart again and now it works, sorry to bother thanks
Why do lux oscillator use Hull as default, what is different between hull and lux in the lux oscillator?
Does confirmation buy alert, includes any buy event including strong ?
is it recommended to turn off the color from the border of the candles or is it supposed to be like this
is there anyway to pull if the state is ranging or trending into an alert?
i dont see any plot listed in the data view for such a thing
You cannot I'm afraid for now
https://cdn.discordapp.com/attachments/699061885189882006/904780502081368114/image0.png
Im new and I have a question. What is this broker called?
original pic from @jaunty perch
How to setup buy and sell signal on trading view for Lux Statistics signal ,
im looking the same is there any way we can set up alert on the lux statistic for LL or LH
You'd want to select for the statistics plot crossing 0 or 100 for this 🙂
it will be like this
i still dont know is it working like this or not
hello!is anyone here using the forex bot scanner to take positions? is it profitable?
I try like your settings but seems to work sometimes and sometimes not
I tries the forex scanner but it seems not working for me. Even strong signals, reverses.
You still need to check support resistance.
You mean pivot oscillator ?
Hi all, i have a question. If i have setup some alerts with Lux Algo Premium yesterday but i changed two parameters today, do i need to recreate the alerts to update them with the new parameters ?
on trading view yes
It's pretty boring 😭
no recreate
open your alert change lux algo premium for exemple for volume save it
reopen alert and select lux algo premium he will take new setting
if you have lot of alert yes is boring lol
Oh, you mean for example :
I change my parameter on Lux Algo Premium for SOLUSDT M5 (like the signals sensitivity), i click on edit to the alert for this chart and i select again the Lux Algo Premium and i save the modification of the alert ?
no you need to select another alert (not important which one is just for remove your old lux algo setting, personaly i select volume) save like that your alert change
and edit select your new lux algo and save
Perfect 😄
Thank you for your help ! I appreciate it
👍
Is there a way to get candle pattern alerts displayed through the lux premium dashboard?
hi. Got a question on Lux Oscillator Premium and Lux Statistics Premium. How do they work as far as triggering buy or sell signal ? is there anywhere I can read on their usage ?
Use the side panel (left) or the search bar (right) to navigate our docs.---
HELLO I have problems I bought lux yesterday but I haven't received the indicators yet (Alessiobiundo2008)
thank you
yes I know but it is not there
for me 5minute after i bought it's was working, did you give the good profil name you have setup on trading view ?
I was wrong yes I wrote (ALESSIO BIUNDO) but without 2008 how can I do?
thank you
Luxalgo website on the bottom you have link for send mail to LuxAlgo support if you need help
I already wrote to him yesterday
👍don't forget to check sometimes your spam box
ok thank you
Yep if you connected the wrong account support can swap this over 👍
how can I do?
You emailed in how long ago?
There isn't I'm afraid
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
In our docs we have a full rundown of the features in Lux statistics 🤝
this morning at 8 London time
Ok perfect support will get back to you shortly 👍
ok thank you very much
@indigo cradle I checks Full Guides docs you sent, also your cool youtube channel 👍 But for Lux Statistics V2 i found any info, I did like you sais yesterday plot and cross 0 or 100% but I have any alert open, do they have maybe issue alert on V2 ?
pivot oscillator ?
Ok will test that, thanks to answer so fast you have new follower on youtube 😉
Welcome to the club 😉
Here Gecko Channel subscribe and comment guys Thanks for the job 😉 https://www.youtube.com/c/GeckoTrading/videos
hi
2 part question ...
1- is it possible to change the time frames on the MFT?
2- is it possible to be on a 5 min chart for example but have the signal showing for the daily?
Not currently I'm afraid
Also that's currently not possible
MTF is a complex one
is the MTF the autopilot settings for those time frames or something all together different?
What do you mean by that? Does AP use MTF?
sorry meant what settings are used to determine the green or reds for the mtf
It'll be the settings you're using on the chart
Hi! once I have my account active in TradeView, I am still in the free version with Ads and this is annoying. Is this how lux algo will be on tradeview? I was under the impression that my account will be upgraded. thoughts?
strange can you send screenshot ?
I mean I have the 3 scripts from lux
but then I cant add more than 3 indicators and ads pop out all the time
which type of account you have on TV ? Premium ?
Pro you can not have more than 5 indicator
Hi there
Right click your chart, remove all indicators then re-add lux
But you can't have >3 indicators added on a free plan
*Added at a given time
then I need to also upgrade on TV?
If you want more than 3 added at a time then yes sadly you'll need the pro plan
so just to be clear , once you registered in LuxAlgo then it will not upgrade your account in Tradvin view ... you will have to pay extra to upgrade in TV
Correct; LuxAlgo isn't TradingView, we sit on top of TradingView. Lux will work will the free plan of TV however if you want to remove those ads + more indicators added you'll need to upgrade your TV plan
If you can i recommand you to wait Black Friday if you want to upgrade
how long this takes to start using ?
You don't have access?
Have you connected your TV account?
what is Tv account means?
Your TradingView account
On our connect accounts portal did you enter your username?
How did you join VIP in our server?
i entered username
it really confusising no log in site
This is the website Lux's indicators are on
okay
To use Lux you must make an account there 🙂 https://www.tradingview.com
i should creat account there correct ?
Correct 🙂
so ami have to sign up in there as well ?
You do yes 🙂
no sign up indication on website
On TradingView?
how do i start
then
i subscribed on alux then i see i have tyo operate on other website
yes ia
yes i am on tradingview
it shows that i ahve to pay again
Join for Free
It's free to sign up ^
You don't have to pay
sir again tradingview and luxalgo are the seem ? it seems like thgis is a new platform and i have poy while i have payed alread
is trading view telles when to buy and sell ??
Hi all, i have a question. I like to trade with pattern and the S/R Mode pattern on Lux Algo is very good ! But i want to know which level you advice in H1 ? 5 is the default value but do you think it's better to increase / decrease this value for H1 ?
This is a very personal choice really 🙂 If you prefer long term patterns you'd want a higher value
If you want shorter term you'd want a lower
I couldn't have hoped for a better answer ! Thank you @indigo cradle 😄
quick question for you guys. I am getting the buy and sell notifications on discord for BTC but when I pull up the chart on tradeview it doesn't show up right then. I do have my settings optimized based on the optibots recommended sensitivity and agility. Is there just a delay or am I missing something? Thanks!
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Ah I see. Thank you!!
Can I have a 1m usoil settings for sensitivity, or is that equal to the 5m?
We don't have optibot for this however you can use alternative methods of optimisation 🙂
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Thank you!
How do I get Lux Algo set up on my trading view platform?
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Then I hit the star next to “Lux Algo Premium” ?
Okay so I clicked the only invite scripts and I see it on there so is it on now?
Okay I think it’s working! Is there a video that shows like what the features do and what certain things mean? Like for instance I’m not sure what “strong” means
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Our full docs are here 🙂
Thank you very much
And we have a lot of video content on: https://www.youtube.com/c/LuxAlgo
@indigo cradle on your video "SIMPLE Trading Strategy | Outperforming Bitcoin 2021 (With Lux Algo)"how it's possible to setup on TV buy signal to open only if Lux Oscillator is on the same way ?
Sadly you cant make confluence alerts in TV
So on your video you talk for people who trade manually ?
Correct; all my videos are normally education for manual traders
I try to setup LUX Statistique for buy sell signal but we have delay between 0% or 100% and time
Those labels aren't real time
yes
unfortunately because it could be amazing
do you have solution for consolidation time, when buy and sell signal is not good,On big time frame is better but I would like to found something on short timeframe for my autobot
For a ranging market there are some great features such as reversal zones or contrarian signals
This video focuses on 2 of my personal favourite features within Lux, the predictive ranges and oscillator. I cover why they are important and a strategy whereby the user can identify potential reversals and retracements in the market. This can apply to any asset.
Get access to Lux Algo indicators: https://luxalgo.com/
Lux Algo features used i...
?
This is a nice educational idea too
Hello Admin, any update on this please? I believe my sub ends in 3 more days 😦
Sadly if you can't pay with card anymore the yearly is the way to go. I'd suggest trying again when your sub ends maybe
hey is there a chart or page that explain all the details about the indicators and how to read them?
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
Join our Discord: https://discord.gg/LUX
Get access to Lux Algo: https://luxalgo.com/products/lux-algo
Get the best settings: https://www.youtube.com/watch?v=OmvxpTE9tlw&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
And example strategies here
got it! thank you!
I logged into trading view on my phone is Lux Algo automatically on?
It appears to be 🙂
Vibe thanks
Hi, does the number has anything to do with pattern detection? @indigo cradle
It will adjust the size of the patterns detected
10 being long term ones
1 being very tiny ones
When I changed my view of Bitcoin to 1D “1 day”. My chart looks like just a think line with no volition how can I change that?
click "auto" at the bottom right corner and see
Yea that worked thanks
Make sure you entered the correct TV username into the Connect Accounts portal, if so, you have to refresh your TradingView app to have them unlock
If not, email support@luxalgo.com your correct TV username and we will unlock within a couple hrs
If I want to look at Bitcoin and I type it in the search bar there are so many that pop up which one is it?
And it looks like it has different sources does anyone know what that means?
@indigo cradle what’s the difference between strong and buy signal
See here:https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals#confirmation
Strong signals just mean it's more likely with the trend
Type Of Signals - Confirmation - Contrarian - Display
Thanks
hi support, kantan ashi is exactly the same as heiken ashi?
It’s different @hollow cloak see here: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/candle-coloring#kantan-ashi
Candle Coloring
@indigo cradle Is it possible to customize tracer and catcher colors?
Yes press on here
Would I like to do an experiment on it. And I need to differentiate the colors of both. Work with them together.
Yep in the style settings 👍
Do you like to make entries with the buy or sell indicator together with the reverse zone?
Is there a way for me to rename or put short labels for "STRONG" or "BUY" ? They sometimes overlap during market open and make reading chart confusing at times.
Click the icon next to the color
And you can change the type of label
Thanks for sharing this option. I tried but I am unable to change the name of label from "Strong" to just "ST" as an example. When we have these labels very close to each other then it overlaps and not able to see them clearly on chart.
This you cannot change I'm afraid; it can happen when you're very zoomed out
I am having four charts in one screen so not much space. Have to see if there are other alternatives or have to only keep two charts only.
Is there a way to get alert only for the red "x" which is touching or at lower band ?
Confluence alerts aren't currently possible in tradingview sadly
Ok. I think we had a discussion on it earlier as well and that was for strategy. I think both of these may need a separate server implementation using webhook where I get multiple alerts and combine them to then send one upstream alert. Is that the only solution you can think at this time ?
Currently yep, sadly that's the only approach for now 😦
ok I will try to implement it and come back in case I need some guidance or help. Thanks so much.
whats the diff between Any Confirm Vs Any Signal
I got a buy and have my alert setup on Any Confirm, which did not trigger
Any signal includes contrarian signals
Any confirmation is just for confirmation
I'd suggest remaking the alert in this case 👍
Noted.. thanks
it got triggered but with delay.. I guess its TV issue ?
TV = Trading View
It should alert on the bar close 🙂
will setup again..tks
Could Lux algo provide this option from its side with some common combo indicators ? Or create a new confirmation alert where two conditions are meeting ? Just thinking about simpler options here.
It's a little tricky; there may be some work around I'll have a look into for you
hey admin if i pause the subscription for a few days and rebuy later
do i need to reconnect discord and tv
Hey Admin, is their a way which trigger alert thn any stock in watchlist turn strong buy or sell on any timeframe? if this question answered earlier thn plz share link
When you resume it'll give you access back
There isn't i'm afraid for now
thank u. is this something which can be developed? i think it wl be useful for subscribers
Thank you. Really appreciate you looking at it and making Lux algo even more useful for everyone.
One simple way for you is to give us an option like - Select another signal within certain candles or ability to check status of another indicator. This is what I had been thinking of implementing on my server but devil is always in details so when trying that we realized that we don’t have lot of interesting data access and values of other indicators which you do have inside the Lux algo and can make better decisions.
When you use optibot 5m does that mean you need to have the time increments be 5m up in the left hand corner by the ticker?
You will need to be on the 5m yes 🙂
Thanks
whats the reddot ? Take Profit indicator ?
It's a sell signal 🙂
What does confirmation signals agility (%) mean? Ik we adjust it for different optibots but I’m kinda curious as to what it does
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
It's explained in here 🙂 ^
Thanks
So the latest candle I have is 14:59 but in my time zone right now it’s 16:05? Is something up with my time framing?
Which asset?
Hi I just purchased a luxalgo membership and accidentally linked the wrong discord account. (I know, I'm an idiot for even having multiple accounts). I apologize for the inconvenience. The account I'd like to have access on is "Saop#4006." This account would obviously be removed from VIP.
are there instructions for the lux oscillator premium and the different types of oscillators are available?
What is the setting for the "STOCKS BOT SCANNER"?
I don't see the buy signal?
MMa#0067
I see it now. 🙂
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V4 inputs).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
are there instructions for the lux oscillator premium and the different types of oscillators are available?
Absolutely
Features
Hi. I have just signed up. I see the buy/sell, but not any trend lines or the red/green bands. Please advise or point me to the docs thanks
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
See our docs for every feature 👍
thx
@indigo cradle what are some great forex trading app for beginners in the USA ?
https://docs.luxalgo.com/trading-best-practices/recommended-brokers These are the brokers we recommend 🙂
There exist a numerous brokers, certain specialising on stock trading, others on forex or crypto, while there exist brokers proposing a wide variety of markets to their user. Below is a list of brokers we recommend to our user.
Are there any recommended Kantan ashi trading strategies? I’ve combined with trend tracer for now and don’t mind the timeframe so much but 15m+ is preferred
Not specifically however the two should work nicely go nicely together; maybe some others will have suggestions here
Thanks just thought I’d look into something a little different from my usual strategies. It definitely provides a nice easy looking chart so far. Just need to try and optimise I guess
Can you share your settings @sharp wind? I’d like to try to trade using the 15 min chart. Thanks.
Settings for the Kantan ashi or my usual strategy?
Both
Sure I’m no expert though and I would definitely recommend to watch Geckos videos.
I’ve also not used on 15m much and usually trade 1-4h charts.
My usual strategy is Auto settings. Using 4h chart buy after a buy signal confirms with a green candle and green trend catcher and green on the oscillator. Works ok on the 1h chart as well.
Use the TP targets given or get out at a sell signal or take some profits at resistance levels. Or you can even hold until trend catcher turns red
My Kantan ashi strategy has only started today so I wouldn’t recommend just yet lol
Hope that helps
Thank you.
Can someone help me with my account connection to tradingview?
Hi there 😊
Have you entered your username into the connect accounts portal?
Yes, i didnt know i already had a account.
So its connected to someone else account I think.
Ah ok; give support@luxalgo.com an email with your correct username and they'll swap this over for you ☺️
Tnx 😊👍
Hi. What exactly doing autopilot ? It's kinda different algorithm for optimal settings ? For possible more longer trends ?
not really understand which one more useful. Sometimes autopilot guess better, sometimes manually adjusting optimal settings works better.
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
See here the perks of each method ☺️
If you can I'd recommend using optibot
Autopilot doesn't fit everyone's trading style so it's a very personal choice
When I choose one of the three LuxAlgo Ashi candles, does it matter if the default TA chart type is toggled w Candles or Helkin Ashi
Yep; that will still change the signals
So signals use the TA chart type data not the Lux Candles
So if you load kantan ashi; the signals will use the chart data, not the KA candles
Yeah that confused me a bit. But the LuxAlgo candles do change if I change chart type to KA
so all the indicators use the default TA chart type Candles
but the custom candles mode will use KA if chosen
you should note this in the suport documentation
I have forgotten how to set alarm on the Lux Algo Legacy Oscilator, anyone having a tips on how to set alarm that is triggered when the indicator becomes red?
thank you
You are trying to set it up still?
When i look at tradingview its still locked under indicators
Im trying really hard to not just give up and cancel everything…its most likely bc of all this setup and it not being seemless ..it is probably my fault i just am at that point 🥲
Is your tradingview account new?
Where is the error?
What's your TV username?
Snortstocks
Does it not work on mobile?
I cant put indicators on any crypto
What's the issue?
Will it always have a lock emblem when choosing the indicators
Green
Perfect
Then you have access
You are most likely getting the pop up regarding >3 indicators?
Yes
I wish that would stop
So maybe im just illinformed but how can i actually use what i just bought lol
You need to remove those indicators
TradingView Free allows for 3 indicators open at a time
So since you have 3 open
You'll need to close them before you add lux
So you click the script name and click x. Doing this removes it from your chart
Once you have removed the 3 indicators from your chart then you can add lux
Is there any 'optimized' oscillator length?
There isn't I'm afraid as an oscillator really depends on how a user uses it
You can try changing Chart Type to Helkin Ashi, setup the LuxAlgo 4.2.3 based on Helkin Ashi, then set up Any Alert, check if the alert result shows what I pictured
What is x mean on candles
take profit/ exit position
Thanks
HELLO im new joined yesterday what is the best time frame and best settings ?
Use the side panel (left) or the search bar (right) to navigate our docs.---
Lol watch Youtube videos then
there is no such best setting
i dont have purple candles as on video
https://docs.luxalgo.com/getting-started/what-is-lux-algo/
this can explain all
Use the side panel (left) or the search bar (right) to navigate our docs.---
Welcome 😊 Well there are around 30 built in features so it really does depend on what you're looking at and your strategy
Accuracy can only be something for strategies
the question is which strategy is good
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
Join our Discord: https://discord.gg/LUX
Get access to Lux Algo: https://luxalgo.com/products/lux-algo
Get the best settings: https://www.youtube.com/watch?v=OmvxpTE9tlw&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Here is our playlist 🤝
Hi, is here also a group with sharing tradingsignals?
Awesome, thanks for your support!
How can I help?
What is the point of the optibot when the signal changes again when the optibot outputs new data? I mean whats the idea behind that
This is the issue with any backtest really; it will overfit data
What it aims to do is provide a good rough area for signal settings for the upcoming trading session
A pleasure 😉 😄
Is it possible to have an Alert for price hitting the Reversal Zones? or need to manually add alerts?
Sadly it needs to be manual for now
@indigo cradle were Futures removed from the optibot settings optimizer feaure?
Futures are not supported by the new data provider, but should be by the end of the year hopefully 🙂
Can someone help me with manually adding the indicator to my TV?
you need to open a tradingview chart, in order to add the indicator click on the 'fx' panel or press the / key, go into your invite only scripts, there you should see the lux indicators, click on them to add them to your chart.
More info here https://docs.luxalgo.com/getting-started/setup-tradingview
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
What does the Classic Circle indicate (Lux Oscillator)
The Classic oscillator type is a simple oscillator designed to return divergences as well as determine points of potential trend reversals determined from crosses between the oscillator and overbought/oversold zones.
got the answer, thanks
Luxalgo 4.2.1 is being used. I want to set it up like white image, but my setting screen is different like black image.
What should I do?
Is it possible to get a notification when the trend tracer and the trend catcher crosses with each other? Lux algo ver. is 4.2.1
Yes select Crossing first from that dropdown menu and it should work @left hemlock
Thanks a lot.
I noticed a few updates ago that the institutional volume profile was not showing up on my chart any idea on how to remedy this?
Do you have a screenshot of what you were looking for?
Under the S/R
hi support
is there a way to receive a trading view alert for every single buy and sell signal?
Would be awesome to have a feature where you can see a buy and sell signal feed.
Obviously a notification alert for everything would be INSANE, im thinking more a way to see a feed or list.
You need to zoom out 😊
A screener will hopefully be coming soon 🤝
Never mind I have found out the solution. the source FOREX DOT COM has not been providing me with vol info. I switched to Oanda data source and i now can see it.
thank you though.
Ah yes or that 🤝
Have you connected your account?
i can send you a dm?
Absolutely
a question
on the 15 min chart
9 o'clock is SELL
bitcoin falls but does not continue to rise
how am I supposed to understand this now
Do you have a screenshot of said chart?
Ok so I see you're using a high sensitivity
Signals are not for entries or exits
This signal simply suggests the market is changing direction
This doesn't have to occur instantly
Is it possible to change cloud transparency?
There isn't really an easy way to do that sadly
Your best option is changing the colours of cloud 1 and 2
I take the data
by Discord Settings Optimizer
or shouldn't you do that
Optibot is a nice option yes 🤝
Good morning, whats the difference between trend tracer and trend catcher which one do you suggest using?
For example on trend tracer might be red but when switch it to trend catcher line is green so little confused about this
The trend catcher is more predictive in nature so can catch a trend earlier at the risk of fakeouts
The trend tracer is a more classical trend following tool so can react slower
So it'll depend on your trading style and how you want to use them 🙂
Thank you 👍🏽
I bought the annual subscription yesterday. So I am pretty new to the Lux Algo. A stupid question, does Lux Algo Premium suite offer something similar to the MACD? I see the Lux Oscillator Advanced mode is pretty cool, and acts similarly to the MACD but it is not the same.
Well the thing I'd draw the most parrallels to would be the classic oscillator 🙂
It's a momentum indicator
And quite a classical one
On a lower length with reduced smoothing it may be more similar
@indigo cradle Thank you! I
Hi newbie here. Would a default settings work just fine?
Welcome 🙂 Yep they will work nicely if you wish to use them
i have just added the lux algo premium to my chart.. it says "study error".. i have not changed anything.. i dont see any buy or sell signals on the chart..
Have you connected your account? 🙂
hey im new, i add all. But how the signals work ?
yeah.. but just around 15 minutes ago
Try refreshing your tradingview and re-adding 🙂
!signals
Learn more about our features & Signals: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals
Type Of Signals - Confirmation - Contrarian - Display
thanks, i logged out and in again..now it works..
The Auto Pilot Signal Settings adjusts itself based on the infos from optibot?
Autopilot is a different approach of optimisation so will dynamically adapt to market conditions so is different to optibot
ok, but as i understand its adjust the two parameters..
Autopilot will take control of them for you 🙂
@indigo cradle Hi Gecko, could you DM me please ? having an issue in accessing my account. Thanks!
Yours says the same haha, ok one moment let me change my settings
Hopefully, an easy question, but what is the difference between the "Strong" red and green indicators and the "buy" and "sell" indicators?
Strong are signals that go with the trend 🙂
and the buy/sell indicators then?
Those are just smaller trend changes
137 / 5000
Risultati della traduzione
Hello I signed up today .... and entered the wrong name of trendview. how can i solve. I don't charge your indicators h
@indigo cradle helllllllllp
Hi there, give support@luxalgo.com an email and they can swap it over 😊
