🤝support

[earnest portal]

Thanks gecko

also what is the difference between the spider and the classic dashboard?

[indigo cradle]

You can set an alert for EQ crossover 🙂

It's just a different way to display the dash 🙂

[earnest portal]

how I dont see it?

[earnest portal]

oh ok thanks lol

[jaunty perch]

Hello support, I'm wondering if it's possible to set different sensivities on different chart. It seems that the sensivity is "global" and I find back in my other tabs on tradingview :(

[native cloud]

How do the institutional levels work??

[indigo cradle]

The pivots?

They label pivots where institutions appeared to step in

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/support-and-resistance-and-trendlines#institutional-pivots

[hidden jacinth]

What should we put for agility if your pair isnt on Optibot? I use the recommended sensitivity but im not sure what to put for agility.

[feral lava]

Doesn't have to be adjusted @hidden jacinth - but can be used for filtering out ranging markets

[hidden jacinth]

Oh can you elaborate on that? What exactly does the agility give us?

[feral lava]

It allows our algorithm to avoid ranging markets and is used by OptiBot to find the most precise settings for users.

[hidden jacinth]

So if i have it at a random setting, there would be no difference?

[feral lava]

No there would be a difference, increasing it will filter out ranging markets more

[jaunty perch]

Can you recommend me a broker with the lowest possible fees in Europe, please

[hidden jacinth]

So basically if im in a pair, putting a higher agility would make the algo less likely to fire a signal when the pair starts ranging?

[feral lava]

Yes, however the trade-off will be delays in the signals of course -- but that's specifically what it aims to do, advanced users find usability in it but we generally recommend only using it for Optibot

[hidden jacinth]

When the Directional Matrix set on Confirmation MTF gives percentage, what exactly does that percentage mean? I tried to read the Lux Docs online but i didnt understand it

[feral lava]

It’s how bullish in % terms the timeframes are

[worn iron]

I lost a lot of money today from live stock forex, which of the robots is better?

[feral lava]

Don’t follow signals blindly

They aren’t robots, they are confirmation signal alerts

[worn iron]

Sheet , i lost more 800 euros

Only today

[olive apex]

Nothing is guaranteed. Pretty clear on the docs/instructions/emails.....

[torpid rock]

how can i access to new version?? i have the 3.5

[lucid vapor]

There is a section in the docs for updating instructions: https://docs.luxalgo.com/getting-started-with-luxalgo/how-to-update

[torpid rock]

thank you 😄

[cedar gorge]

Is there a way I can screen crypto/ stocks in TV based on Lux indicators? E.g. All strong buy confirmation/ oscillator?

[feral lava]

Sadly TV doesn’t support custom indicators yet on their built-in scanner @cedar gorge

[cedar gorge]

Got it. No worries. Just checking :) thank you Mack!

[alpine storm]

so came across this parallel pivot line indicator,, how to adjust the slope? the default value will do in all markets? i dint quite get it in the docs

[shy relic]

everything is explained in the indicator description, but basically, a slope of 1 will use the slope of a linear regression, so basically each line will have the same direction as the main trend, a slope of 0 will return horizontal lines, a negative slope will return lines with a direction opposite to the main trend 🙂

[icy ridge]

Are the live bot scanners just as accurate as placing your own notifications via tradingview?

[jaunty perch]

Hello support, I'm wondering if it's possible to set different sensivities on different chart. It seems that the sensivity is "global" and I find back in my other tabs on tradingview 😦

Anyone to consider my question/request ?

[shy relic]

you can use indicators templates, save one with the name of the symbol, make sure to check 'remember symbol/interval', then save it

whenever you click on it the chart will load the saved symbol/tf, with the indicators using the settings used when you created the template 🙂

[jaunty perch]

OK I tried that, but it doesn't work with alerts. my whole alerts get tuned to the latest open configuration. Is there a way to configure LUX for each alert ?

does this simply means that I cannot monitor several chart ? and each time I need to close them all, and reload manually one specific symbol with it's configuration ?

[shy relic]

you can also use multi charts layouts if you want to monitor multiple charts at once 🙂

[shy relic]

alerts will always be based on the setting, symbol, and tf used during their creation, so if you want to change the settings used by an alert you will need to edit it, this can be time consuming but it is made easier with all in one alerts, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#all-in-one-alert-setup

[jaunty perch]

Yes I got the all-in-one-alert setup through webhooks feeding my own coded software ;). OK it seems it works with the multi-chart display !

Thanks

Got a last question ... it seems that the alerts I'm getting are different from the one of the chart, what can it be due to ? the alert option ? i.e. once per candle, on candle close... ?

[shy relic]

you want to use 'once per bar close', other frequencies can trigger on signals you wont see on your chart.

[tough charm]

I am in a 5 min chart and the recommend confirmation sensitivity in 3.6 v keeps changing in the dashboard every couple of minutes or so, is it expected because im in lower time frame?

[lunar gulch]

do you change the agility?

cos I've noticed when I change agility - recommended sens changes too

[tough charm]

I did not change agility , but Alex just replied on the other chat that its normal to change. Looks like for volatile alts in lower timeframe it may bounce between sensitivity to optimize better result

[lunar gulch]

oh, hasn't happened to me yet) got it

[quiet crag]

Is optibot 5n still not running?

[safe marlin]

https://tenor.com/view/sad-crying-spiderman-cry-face-ugly-face-gif-5701170

[hidden jacinth]

If we are using the TP/SL level, how would we "measure price variations" to use the appropriate distance?

For Example on the GBPUSD pair

[shy relic]

@safe marlin @quiet crag sorry about that, we are working on getting it as soon as possible

[shy relic]

it depends on how you would use the TP/SL levels, if as support/resistances then there wouldn't be a specific SR significance to catch the variations you want, you would need to set it manually and see if the results are satisfying.

[bold copper]

How optibot work

[shy relic]

optibot optimize the sensitivity and agility settings for the confirmation signals, and returns the best pair of setting over a period of 5000 bars.

[manic remnant]

Hi team- regarding lux oscillator - Lux - there should be differentiation of how institutional activity is either on buying side or selling side - little bit of confusion there

[shy relic]

the institutional activity can't estimate whether institutions are buying or selling, at least not at the moment.

[hollow fable]

Hello, I just get the indicator but i'm missing the auto confirmation signal setting

[hidden jacinth]

Yes I like to use it as S/R because that is where I take my profits. But i wouldnt want to have the S/R too tight where my trade has no room to breathe but not too far to where my TP is unrealistic.

[indigo cradle]

@hollow fable this was changed to show the best sensitivity in the dashboard, it may be added back shortly

[hollow fable]

thanks ,, how about the agility should keep it as it is or is there an auto setting for it ?

[indigo cradle]

For the moment maybe keep it default, increasing it helps filter ranging signals

[cloud scarab]

How can I get alerts to push out a notification on my phone? Been trying but maybe I am doing something wrong

[indigo cradle]

@cloud scarab Push notifications from Discord?

Sadly if it's from Discord since our server is >2500 members discord won't actually ping you :(

[cloud scarab]

no, push for confirmations alerts 'strong buy', etc...

from tradingview

[indigo cradle]

Ahhhh ok

May I see your settings?

[cloud scarab]

i am not sure I am even doing it right😫

went into setting on algo and checked strong buy/sell

[indigo cradle]

Have you taken a look at our guide?

Yep that won't work, you need to do the next step to activate:

!alerts

[cloud scarab]

I did so I feel stupid for asking. I will read over it again.

[indigo cradle]

Let me get the correct link for yah ☺️

https://youtu.be/E2Bb0ly2hEw

@cloud scarab here's a vid :)

[cloud scarab]

thanks, ok I think I just needed to check 'notify on app' I will see if it works, thanks

[native cloud]

Where has auto confirmation signals gone??

[indigo cradle]

It was removed so the sensitivity is put in the dashboard but we are adding it back v soon

[native cloud]

Okay no problem I’ve got a chart layout with version 3.5 so all good

[thorn moth]

Hey, apologies in advance as you may have had same question previously. I'm looking at using the tool to set my S.L and T.P, so I have enabled the TP/SL feature and now shows R and S lines- how realistic is using this in setting TP and SL?

[indigo cradle]

@thorn moth So they are predictive areas where the price may find support or resistance

So using them as a take profit or stop loss can be quite nice 🙂

[thorn moth]

Thanks for that.

[split pelican]

Hello, how can I find these guy named Klawzeus in trading view or telegram or Twitter????

[indigo cradle]

#776138690007007292

[split pelican]

He gives signal only one day in a week...what about the other days?

[wraith bone]

Yo yo yoooo

Okay I've been wanting to say something about this for a while

The optibot sensitivity settings for BTC are like, the opposite of accurate.

I know there's a ton of manipulation in BTC, and I don't really blame you guys because that market is as unpredictable as it gets, but there has to be better settings that you guys can figure out, because I'm actually using lux as an indication of what not to do, because it's consistently the opposite

[feral lava]

which timeframe @wraith bone

[wraith bone]

5 and 15

It's just so unpredictable. At this point I think that there's market makers that are looking at what signals are being put out, and they will move the market in a different direction in order to stop everybody out and take the money

[feral lava]

#800747939226976266 and #797529919499272224 are being updated soon again, think there was an issue with the data

[wraith bone]

I wonder if there's a way to factor in the market manipulation, because it seems pretty predictable to me

At this point I'm trying to find out which hours the unpredictability is, but it seems like it is way more unpredictable during New York hours, probably because the New York firms are trading differently than the Sydney Tokyo and London firms...

I wonder if there should be different settings for different trading times.... I don't know I'm just trying to figure out how to play this animal

Like for instance, here's an optibot Strong buythat just came in that is exactly the opposite of the market movement, this thing was way too quick to put everything in green candles and this would have stopped out anybody who bought on the green candles.

I'd be interested and hearing about what kind of confirmations the algo uses before it designates candle colors, I would have thought that this whole region should have been in purple

There was a whole lot of resistance when it was trying to cross the 200 EMA, and that's why it's swing back down

[digital pine]

It’s boosting up

[wraith bone]

I hope so hahaha

Look for instance, that strong bike came in at a situation where the stoch and RSI were showing overbought, and there was no macd correlation.

I don't know man, Bitcoin is kind of impossible to trade. I would be interested in talking with you guys figuring out what kind of confirmation the algo is looking for

And the 15 minute optibot is still in sell mode... This thing is looking bearish

[indigo cradle]

Signals won't perform well on these types of moves

If you're looking for things that are there to predict such moves the oscillator / reversal zones / Tp/sl will help

But the signals are for trends so sharp moves won't be predicted

[wraith bone]

Okay can you guys help with this, I'm looking at the BTC 5 minute chart for instance and I got full green like it's in an uptrend

But this thing is eyeing a short move down and it actually just broke a critical resistance point right now as I was typing

[indigo cradle]

For the osci?

[wraith bone]

And now it's beneath the cloud, if it closes beneath the cloud this thing is going to be on a downtrend, but the thing is glowing green with the algo

If this thing enters the ichimoto cloud it's going to be bad news for bitcoin, but the algo says it's bright green uptrend

[indigo cradle]

Yep you're using something for trend detection on something that's currently undergoing very very sharp price action and a ranging market

[wraith bone]

Would you guys think that this thing has a solid chance for a reversal? I would think that if it doesn't make a huge upward move right now at this very second this thing is going to the floor

Okay just at this second a contrarian buy signal came in, which I would totally agree with

[indigo cradle]

Personally there is a little confluence between the reversal zones and S1

If I were looking for an entry in a ranging market it'd be there

[wraith bone]

That indicator on the bottom, which indicator is that

[indigo cradle]

That's Lux Oscillator

[wraith bone]

I want to put that oscillator in, I'm using the legacy oscillator right now how do I get that one

[indigo cradle]

It's the default mode

Type "Lux"

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-oscillator/lux

Has some really nice features in there 🙂

[wraith bone]

Oh I have the luxe oscillator 2.1 do I need to turn it off and turn it back on

[indigo cradle]

You'll need to update it by removing it from your chart

Closing your browser

Opening a fresh chart and re-adding

[wraith bone]

Okay so I just got a contrarian buy signal, and I would agree with that signal after the close of the next bar, so pretty much I've been using the wrong signals?

[indigo cradle]

Well Bitcoin is ranging on the 5m so confirmation won't be the best

It does seem to respect the reversal zones and levels a lot though which is nice

[wraith bone]

Is there a video of how to use this lux oscillator

[indigo cradle]

https://www.youtube.com/watch?v=0YG42qVbCtw&t=0s

[wraith bone]

Thank you guys

[indigo cradle]

You can keep up to date with updates via #👀luxalgo-news 🙂

[lunar gulch]

More educational/strategy/tips videos would be much appreciated o:

Tho I've read all the documentation, having hard time applying it

Making progress though

[trail anvil]

Evening I am wondering why my alarms wont work

cant see any option for lux

[indigo cradle]

Refresh the page and it'll appear 🙂

[trail anvil]

thanks how to refresh?

[indigo cradle]

Refresh the page 🙂

f5

[trail anvil]

also i notice there are 6 alerts for confirmation

but i only count 4 on the graph, sell , buy , strong green, strong red

[indigo cradle]

Confirmation any?

Are these the ones you are referring too?

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts

[indigo cradle]

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts

[trail anvil]

These 6 will watch the vid shortly

[indigo cradle]

See here for what each do 🙂

yep or the video

[trail anvil]

ok thank you

[trail anvil]

Ok i have read it, the alarm function where you can choose which alerts come and then allow them to come through as any is very useful

Still don't get why there are 6 confirmation signals, but only 4 appear on the graphs

[indigo cradle]

Some of them aren't signals

Confirmation any is for any confirmation

To save you setting all 4

Keep vip support for support btw guys 🙂

[trail anvil]

ok so confirmation buy, actually include 2 sub signals, - confirmation strong buy and confirmation buy turn strong

[indigo cradle]

confirmation buy is for normal buy

confirmation strong buy is strong buy

etc

Confirmation any is for all 4 together

so any of the 4

[trail anvil]

ok ill have to think about that

I notice the recommended sensitivity is preposterously sublime

however if you select the recommended sensitivity and scroll back the further you go back the less coherent and inphase the signals will be

assuming the sensitivity would be different?

[white merlin]

what is the ANY part of confirmation any?

[indigo cradle]

It's for any confirmation signal:

• a sell

• a buy

• a strong buy

• a strong sell

all in one alert

[white merlin]

in alerts I mean:

what is the difference between the alerts in 1 and those in 2

[earnest portal]

Hey gecko sorry to bug you but could I ask a couple questions about coding?

[indigo cradle]

You can sure 🙂

[earnest portal]

I was wondering how I can add an offset to the wma because it only lets me do this wma(src,len)

[indigo cradle]

It's in the plot parameters

[earnest portal]

how can I include the offset in that

[indigo cradle]

offset = x

Not within the actual calculation

But we should talk in DMs

[earnest portal]

ok thanks

[indigo cradle]

If I have some time will help out 🙂

@white merlin No1 is any so it's a combinations

No2 is just single conditions

[white merlin]

a combo of buy and strong buy for example?

[indigo cradle]

Yep so any confirmation buy is a strong buy / buy

all in one

[white merlin]

perfect that answers that

[cloud orbit]

How are people using lux algo for long term investing?

[fresh locust]

guessing it will work when the order doesn't say "unfulfilled" on the member page

[indigo cradle]

@fresh locust I've messaged support for you so will know in the next 10-15m

It's odd

[fresh locust]

ok, i'll wait and see what they say

[fresh locust]

ok, all set - thanks!

[iron ridge]

Hi, how do I change the sensitivity?

[indigo cradle]

@iron ridge It's within the script settings 🙂

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo#adjusting-settings

[thorn silo]

Hi guys in the optibot15m is qqq the nas100?

[shy relic]

partially correct, QQQ is the etf that tracks the nas100 🙂

[thorn silo]

Cool

Is there any specific settings for the nas100

[shy relic]

eventually the recommended sensitivity displayed by the dashboard, else you would need to use the optibot settings for QQQ

[feral lava]

Hey @granite steeple - our contrarian signals mode, candle coloring, reversal zones, etc -- can all be great for spotting reversals

[wraith bone]

Hey guys I got a great idea for an alert that I would personally love to turn on right now

This one is game changer

I mean if you guys know how to turn it on I would like to turn on this alert right now at this very second, but I didn't find it

So. Ranging markets are terrible for Trading BTC.

I want to trade trending markets.

And I'm sitting around for hours looking essentially for it to change from a ranging market to a trending market.

How do I set up an alert that notifies me that it has changed from a ranging market to a trending market?

The indicator absolutely does the difference, we should make that into an alert so that I can go outside more than once a day haha

Or is there any way possible to turn on that alert right now

[feral lava]

can look into this with developers, it's a pretty good idea @wraith bone -- however the State in the dashboard is a bit of an estimate, no it's not exactly perfect but can be helpful

[wraith bone]

I mean that's fine but an alert would allow me to know when I should look in to turning on my setup and getting started

Some people like playing ranging markets, some people like trending, I think it would be the best alert edition ever

[hushed remnant]

Is there any timeframe in which the optibot will be updated? I thought it was on a weekly basis .

[feral lava]

yes it will be updated very soon, hoping tomorrow it'll all be up to date

[hushed remnant]

Thank you!

[sharp blaze]

I watched the Lux Oscillator video, but still don't get it how to use it. Do you have other videos that easy for beginner?

[feral lava]

https://www.tradingview.com/x/ozTvg8v5/

@sharp blaze - there are buy/sell signals and you can follow the trends / spot divergences with other parts of the oscillator at the same time

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-oscillator/lux

[sharp blaze]

What is the different with Buy and Sell on Lux Algo Premium?

[feral lava]

they are just different signals - they try to catch reversals

[half inlet]

Is there some sort of configuration I need to use, because these buy/sell indicators make no sense. Some are saying to buy right at the start of a crash

[feral lava]

Hey @half inlet - suggest you use candlesticks

And we have a guide for settings

[jaunty perch]

Everything you need to know on optimizing signal settings: https://luxalgo.com/apps/help-center#hc-adjusting-input-settings

[half inlet]

Ah yes, that helps a lot. Thanks.

[feral lava]

In that case, the market looks to be ranging, which can be identified with Lux Dashboard

Generally when market is ranging, confirmation signals won't perform the best. So best to use other features like Reversal Zones or Contrarian signals which would perform better in those conditions

[feral lava]

no problem 🙂

[visual laurel]

Hello, do you provide any API , so easily we can integrate it with Binance and trade automatically

[shy relic]

Currently not, but some integrations are possible by using webhooks in alerts, since these can return Json.

[visual laurel]

yep that i am working on it, but if you have an API we can change the Lux Algo setting as well via API but currently what ever we set in Lux and set alert after that will continue to send Json as per that settings

[flat ice]

The "sensitivity" and "agility" options will always be available in future lux algo versions?

They are helpful

A lot

[lunar gulch]

I saw people requesting auto config back, what are the pros of it?

[shy relic]

you would no longer have to touch any settings

these would be absed on the dominant cycle period, but they are not optimal.

[flat ice]

This version is way better

[lunar gulch]

I don't mind touching settings for hours before going mad hah

[flat ice]

So the "sensitivity" and "agility" settings will be available in future versions?

[lunar gulch]

of course

that's the heart of it

[flat ice]

Thank you

I feel way better now

[lunar gulch]

auto config as mentioned gives signals in a bit different way

[flat ice]

I prefer these settings always tbh

the sensitivity and agility settings

[strange crag]

Which sensitivity are better, those from optibot or those from the panel?

[shy relic]

optibot optimize both sensitivity and agility by using the most recent 5000 bars, so optibot is more precise.

[strange crag]

Thanks 🙂

[dire grove]

Hello. My sbscription just renew but the indicator on tradingview disaperar. Why?

[dry pollen]

hello, my sensitivity settings don't seem to stick to a ticker per page on trading view, i have to keep changing them back manually when switching between my watchlist. Can you please help or advise why this is happening. I'm also concerned the alarms i have set for my instruments will now be set wrong. hope you can help

[shy relic]

make sure to save the chart layout

[dry pollen]

thanks for coming back to me, so do i have to set up a new chart layout for every new ticker?

[shy relic]

well, instead of using the watchlist you can use indicator templates, with that you can switch between various symbols with the indicator using specific settings loaded in

[dry pollen]

thanks for that,. seems a long way around to solve the problem. I'm new to trading view and finding it a bit clunky. Do you know if there is a way to save settings to tickers or do i have to make a new layout per ticker, which will also be very long. Do you have an auto sensitivity setting?

[shy relic]

As mentioned, indicator templates are the best way to do this, else you can always save multiple chart layouts per symbol/tf but thats the same thing and is quite inneficient, else you can use multi charts layouts but this sin't optimal either.

@dry pollen see https://www.tradingview.com/support/solutions/43000543048-what-are-indicator-templates-for/ for more information

[dry pollen]

cheers Alex, i'll give it a look/try. Thanks for coming back to me so quickly. Have a good day

[fluid robin]

Hello Lux Representatives

can you guide me what is the best Forex Trading option setting

[shy relic]

the 'best' settings are given by optibot (currently not updated), and has some majors forex pairs, you also have the recommended sensitivity in the dashboard.

[fluid robin]

ok

thanks

after the update ion will you inform in the discord

[jaunty perch]

Hello admin, Incase if I don’t find my asset setup on optibot, and I’m to use the recommended sensitivity .. how do I know which agility to use along with the recommended sensitivity ..?

[shy relic]

you would need to adjust it in order to match the price variations you want to trade, if you want to be less affected by ranging market use higher agility settings, then you can use the recommended sensitivity for that precise agility

[jaunty perch]

From which higher numbers would u suggest ..?

[quiet crag]

Optibot still down??

[misty tundra]

hi how do i set an anlert to go off when a buy or strong buy is activated on trading view with lux?

[indigo cradle]

@quiet crag Yep sadly, as soon as it's fixed we will let you know, it's an issue with our data provider we are trying to resolve

@misty tundra :

!alerts

[jaunty perch]

How to set up your own custom alerts in TradingView: https://luxalgo.com/apps/help-center#hc-creating-alerts-on-tradingview

[misty tundra]

amazing support!

[hot bramble]

Noticed optibot isnt updating.

[sharp root]

Hey, I've bought the indicator today and received an email giving access to it, however when I place it on my charts it says Study Error Study_not_auth. Please help.

[indigo cradle]

@hot bramble Yep sadly, as soon as it's fixed we will let you know, it's an issue with our data provider we are trying to resolve

@sharp root Try logging out then in 🙂

[river flare]

Is 3.61 live? Mine still shows 3.6 after i removed and re added

Oh ok its all good now

Just worked now

👍

[safe marlin]

optibot lives!

[indigo cradle]

He's back ❤️

@hot bramble @quiet crag Optibot is alive again 🙂

[sharp blaze]

What does it mean Lux Volatiliy hit the upper and lower line?

[shy relic]

It is possible to find out when volatility is increasing or decreasing by analysing when the indicator goes above the 0.25 (lower) and under the 0.75 level (upper), when the indicator cross over the 0.25 level we can expect the market to become more volatile, the user should be cautious, and when the indicator cross under 0.75, we can expect volatility to decrease 🙂

[sharp blaze]

amazing quick support! Thanks!

[worthy bluff]

hi, so in the optibot5m for BTC and other cryptos it says BTCUSD, is it the same settings for BTC/USDT tho?

[indigo cradle]

It would be yes 🙂

[worthy bluff]

Thanks

[fluid robin]

Dear Admin, can you tell me why in my user Agelity is not working

[feral lava]

If you have Dominant Cycle Period selected, it locks Agility

all found within Advanced Settings

[fluid robin]

also TP zone is not working

[fluid robin]

can you tell me where i can find this tab

[indigo cradle]

It's all within the settings :)

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo#adjusting-settings

[fluid robin]

i know but with in the setting which menu you are talking about

[feral lava]

at the bottom of the settings menu of Lux Algo Premium

[fluid robin]

ok let me check i will inform u

Thanks i have done

but can you guide me how to activate Take profit options

[indigo cradle]

In the settings there is a TP/SL feature

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/tp-sl-levels-feature

[fluid robin]

i have done it but its not working

[feral lava]

You need to update to v3.6.1

To update - refresh, and then remove & re-add Lux Algo Premium to your chart, it will appear as v3.6.1 when fully updated!

[indigo cradle]

^ And also I see that the TP and SL is turned on

It appeared

[fluid robin]

is it support and resistance

[indigo cradle]

The TP/SL yep can be resistance and support

They are labelled as such

[fluid robin]

ok

plz can you guide properly, as i am totally new with Lux Algo

how to refresh and get the updated version

3.6.1

[indigo cradle]

!update

[jaunty perch]

To update Lux Algo Premium indicators, refresh your browser/app, remove the indicator from your chart, and then add it back to your chart + save your chart layout on TradingView.

Full guide: https://luxalgo.com/apps/help-center#hc-how-to-update

[fluid robin]

Thanks Admin

for being supportive

now i am with the lastest version

Dear Admin what mode i must select as a retail trader, in support and resistance mode

?

[indigo cradle]

That's really a personal think

You may find institutional pivots useful

[fluid robin]

ok

thanks

IN this bearish situation am i right the way i have understood in the picture ENTRY AND 1ST TAKE PROFIT

[olive apex]

When using the web hooks, are there separate Lux variables available to indicate what triggered it?

For instance, if I wanted a single hook for "New Confirmation Signal", could I embed something to tell if it's a buy/sell/strong buy/strong sell?

[shy relic]

yep you can 🙂 See https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#using-placeholders-with-confirmation-contrarian-alerts

[olive apex]

Thank you, you guys have such great docs, not sure how I missed this.

Is the sensitivity maintained from when the alert was created, or tied to the current setting for the ticker/interval?

[fluid robin]

N this bearish situation am i right the way i have understood in the picture ENTRY AND 1ST TAKE PROFIT

?

?

[olive apex]

Hmm, with this "Dominant Cycle Based Confirmation Signals" I'm seeing almost no alerts at all.

[shy relic]

yes you can eventually use the levels like that 🙂

[shy relic]

do you mean you are seeing signals but these do not trigger an alert?

[olive apex]

Bad phrasing - no signals

I'm looking at IWM today, intervals from 5 minutes to 2 hours

[fluid robin]

ok

[olive apex]

Seems like they come in very late or not at all

[shy relic]

indeed, this is simply due to the fact that the dominant cycle period was larger, if you zoom out you might see more 🙂

[flat tundra]

can you tell me if there is a big diffrence on parameters using the optibot on BTC-EUR chart?

[indigo cradle]

What do you mean by a big difference? Compared to what?

[flat tundra]

the algo optibot settings are specified for BTC-USD, so does it work less accurate on the BTC-EUR charts

regarding the Sensitivity/Agility

[indigo cradle]

Yep it'll slightly differ there

So it may not be totally optimal

But could still perform

[flat tundra]

because somtimes if it's ranging a green candle will be visible on the EUR chart while on the same moment that candle will be red on the USD chart

[jaunty perch]

if i want to trade futures crypto, i must configure somehow different?

[jaunty perch]

@shy relic

[shy relic]

I am unfamiliar with futures on crypto, but I assume there isn't a specific indicator setup for these.

[jaunty perch]

ok thank you

[cloud scarab]

FYI the margin requirements to trade Bitcoin on the CME are $65,000 a contract

[torpid fiber]

@tall topaz needs help he got an email saying he was granted access to the algo but does not have it

[indigo cradle]

He could try logging out then in and it should appear 🙂

[tall topaz]

Ok

No still nothing

[indigo cradle]

Double check the username you provided to support, if that's correct i'll ask support 🙂

[tall topaz]

@indigo cradle I don’t remember giving my user name , my user name is woosterrancy503

[indigo cradle]

Ahhh at checkout it asks for it, if you email [e-mail] with your username they can fix 🙂

[tall topaz]

Ok I will

[limpid nacelle]

Hello guys, there is a video to know when is the best moment to open a operation?

[feral lava]

https://youtu.be/xezy6WGpZ8Y

[limpid nacelle]

Thanks!

(L)

[warm narwhal]

hey guys im new to this can someone please enlighten me how to make profit with lux?thanks

[shy relic]

welcome 🙂 There isn't a magical way to make consistent profits, good practices are always to have a good trader profile and good money management, make sure to read our docs https://docs.luxalgo.com

[warm narwhal]

is it possible to tie the setting to each chart? Like everytime I open a new tab the lux setting will carry over

[shy relic]

you can save specific settings as default, or maybe you mean that you want specific settings for specific symbols/tf

[warm narwhal]

yes specific settings for specific symbols/tf

[gaunt crown]

Can someone explain the dominant cycle based confirmation for me better?

Is it the same as auto confirmation?

[feral lava]

yep it’s the same, see #🔊announcements

[gaunt crown]

Okok thanks

Institutional pivots. How are they plotted? In real time?

[feral lava]

Not real time, these ones are pivot based

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/support-and-resistance-and-trendlines#institutional-pivots

[gaunt crown]

Okok u have an example of when a new pivot level will appear?

[feral lava]

Each line is plotted retrospectively, that is these are not displayed in real time and will suffer from a certain delay precisely equal to(SR Significance + 1) × 5 bars.

S/R significance is found as bottom of settings menu

[gaunt crown]

Okok thank u

Looks good for swing trading

[fickle hound]

why do the charts for SPY not extend into afterhours?

[feral lava]

did you enable “ext” extended hours in bottom right of your chart?

[fickle hound]

thanks!

[jaunty ridge]

Hey. How does the any alert function in settings work?

[shy relic]

It's the setting used to determine which conditions will trigger an all in one alert, to learn more about this see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#all-in-one-alert-setup

[jaunty ridge]

Ok thank you

[lunar gulch]

YouTube channel got strike?

[undone kernel]

These signals repaint. My alerted went off for a strong buy on eurnzd 2am. I went to go check on it and nothing. It's 3:09 right now and it's still trying to put a strong signal there when it supposedly confirmed strong for the 2am candle on the 1hr chart.

[shy relic]

the signals does not repaint historically, a signal can appear at the most recent bar since the closing price can change, a signal is confirmed at the bar close. This can happen when you set an alert using 'once per bar' or 'once per minute', also make sure you have set the alert using the settings you are currently using for the idnicator on your chart.

[undone kernel]

The signal was confirmed at 2am est at bar close. It's past 3 and it's still deciding if it wants to confirm strong. The 2am confirmation was for the candle at 1am.

[icy ridge]

Your settings are messed up

[shy relic]

can you share how you created the alert? If you have been alerted for a signal not showing historically then this is often associated with an alert created with settings differing from the one you are currently using.

[icy ridge]

I just checked EURNZD and the signals are perfect

Strong buy on 1 hour chat and normal buy on 4hr chart. Your chart doesn't even have the signals that I have on default settings

I've also never seen a signal repaint, i've seen it change but thats only before the candle has closed

[undone kernel]

Where is the strong signal? 🙄

Same settings as the indicator

I'm not going crazy. I'm sitting here watching this stuff and lost some money 😡😡😡😡

[shy relic]

really sorry to hear that, I will take a closer look into it, however I noticed you are setting these alerts on FXCM

[shy relic]

since recent issues I strongly advise to not set alerts on data coming from FXCM, since the data can historically change

[undone kernel]

No signal

[shy relic]

@undone kernel indeed, the issue is caused by FXCM providing streaming data that differs from historical data, this issue has been discussed by tradingview

you can see this issue being discussed here

[undone kernel]

So what should I use?

[shy relic]

the tradingview team has aknowledged this issue

we apologise for not having put a disclaimer about FXCM

[shy relic]

oanda should have no issues at all

but I can look deeper into it, so far only FXCM had this problem

[undone kernel]

Ok.

Thanks

[shy relic]

@undone kernel really sorry about this, let us know if you need more help 🙂

[undone kernel]

👌

[sly ivy]

Hey wanted to ask if my monthly subscription was for 54.5 does it rebill at that number?

[indigo cradle]

If you used a discount code that was just for first interval

[west hare]

Hi, why i can’t play youtube video Lux Algo??

[indigo cradle]

@west hare We are just fixing it now 🙂

[indigo cradle]

@umbral vigil DM me your email and I can check 🙂

[rain cave]

i have some questions about tradingview access for my vip account

[indigo cradle]

How can I help?

[rain cave]

i think there may be something wrong with my subscription billing

[indigo cradle]

On TradingView?

Or Lux

[rain cave]

lux

[indigo cradle]

Ah ok

You'll need to email support

[rain cave]

i can dm you my email etc if you need it

oh ok

[indigo cradle]

[e-mail] with the issue 🙂

And they can fix

[rain cave]

ok thx 4 the info

[hidden jacinth]

Hi, Tradingview often freezes alot when i use multiple lux indicators especially reversal zones. Is there anyway to fix this?

[shy relic]

I assume this is a problem due to the platform, we can always report it to tradingview. You can try disabling adblockers, sometimes it can fix certain issues.

[cloud scarab]

just from experience I have found the more indicators on a chart and charts open the more computing power it will take to run them. On my computer TV uses more computing power than the 3 trading platforms I have open combined.

[unkempt prawn]

Hey, is there any way to cancel my subscription

[shy relic]

https://luxalgo.com/apps/help-center#hc-what-is-your-cancellation-policy-1

[cloud scarab]

Is there anything that would effect the institutional pivots?

in the settings I mean

[feral lava]

S/R significance will @cloud scarab

Each line is plotted retrospectively, that is these are not displayed in real time and will suffer from a certain delay precisely equal to (SR Significance + 1) × 5 bars.

[cloud scarab]

ok the default looks solid, but will play around with it today.

[signal trench]

First day and looking to set some alerts on the buy/sell signals. Is the below what I want to check in the settings in order to be notified on signals through Trading View?

[indigo cradle]

Yep but then you need to activate the alert

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#all-in-one-alert-setup

Shown here ^

[signal trench]

thank you that was easy!

[jaunty perch]

admin, plz is there an optibot settings for indices, nas100 or others..?

[indigo cradle]

There are 🙂

QQQ tracks this

[jaunty perch]

i dont get it tho..?

[jaunty perch]

oh yh got it boss, thanks

[vagrant eagle]

¯\_(ツ)_/¯

jist checking out discord's new slash commands lol

[shy relic]

@vagrant eagle cool but not in #🤝support pls 🙂

[vagrant eagle]

Alright my bad

[undone bridge]

hey i have my alerts ticked for the criteria i want in the lux algo settings, however i cannot see lux algo under the condition dropdown in alerts

what am i doing wrong

[indigo cradle]

@undone bridge Refresh the page 🙂

[undone bridge]

worked

thanks

[vagrant totem]

Can a staff please message me about my subscription. Would like to talk about the pricing.

[jaunty perch]

hi, is it the right chat to ask about the indicators?

[indigo cradle]

@vagrant totem Sure you can DM me

@jaunty perch Of course 🙂

[jaunty perch]

I just bought the subscription last night so just getting the hang of it. Is the 'agility' option gone from settings?

[lunar gulch]

It's in the bottom

[jaunty perch]

ok, somehow I missed it, thanks

[spice palm]

just subscribed and have access already ... thanks for the speedy treatment ... can I give you the name of the guy who intro'd me to Lux so that he gets whatever referral bonus is available?

[indigo cradle]

@spice palm Welcome 😄 If you used his referal link it should auto give him that bonus

[spice palm]

no, I'm an idiot and didn't think to do that....

[jaunty perch]

Can you tell me how I should treat the recommended sensitivity settings given by dashboard- as fas as I can see it changes with time resolution and coin selected? Is it accurate?

[lunar gulch]

it's different for different chart and timeframe

[jaunty perch]

ok so if I got it right optibot settings have priority, otherwise use recommended settings

from the indicator itself

[indigo cradle]

Correct 🙂

[jaunty perch]

thanks

[jaunty perch]

hey there, i have a question... i see in the scanner that there is a strong buy for GBPUSD 4H...but when i opened tradingview and saw the 4H there is no signal there as of yet.....any ideas?

[shy relic]

there is, scanners use default settings with normal candles 🙂

[jaunty perch]

aha!! thanks! but it is better to use the recommended settings mentioned in the box yeah?

[shy relic]

in the market, 'better' is super subjective, but here the recommended sensitivity can certainly help instead of using a default setting 🙂

[signal trench]

I am setting up AAPL on the optibot15M. In discord it shows the optimal settings are 30 Sensitivity and 20 Agility but in TV with the Lux Algo it shows recommended 15 sensitivity. Is there one I should be following over the other?

[shy relic]

both differs, optibot will optimize both sensitivity and agility, however the recommended sensitivity will return the recommended sensitivity value given a specific agility. Also optibot make use of 5000 bars. Technically more optimal and precise settings will be given by optibot

[signal trench]

TY

[errant cloak]

Hello Support, i see that trading view has an option called "strategy tester".
I use the 1d time-frame. Is there any way to automatically test which sensitivity/agility settings have the best performance on 1d time frame, apart from making your own spreadsheets with custom date ranges as this require valuable time?

Also, what is the difference between the Optibot settings and the Recommended Confirmation Sensitivity in Trading view? It is confusing, as they provide different results

[shy relic]

See my response above, but in short optibot will both optimize sensitivity and agility, while the recommended sensitivity is only for sensitivity and depends on the user set agility.

[errant cloak]

The optibot does not help much, as i trade in 1d time-frame

Should i use the 4h settings in 1d as well?

[shy relic]

Then using recommended sensitivity is a good option :)

[shy relic]

The returned optimized settings only apply for their respective timeframe, using them on different timeframe might not prove to be useful

[errant cloak]

I see, makes sense. Are you going to add 1d time-frame in the optibot any soon?

[shy relic]

It's definitely something we would be able to do :) as for adding it soon it would depend on the amount of request we would receive

[errant cloak]

I see, it seems then that few people trade in 1d chart? Currently i see the 1d chart as the most "tempting" option for me, as it minimises your trades, based on my calculation.

Do you have any input on this?

[shy relic]

The only tf we don't recommend are the one below 15min, daily is quite high but is a good timeframe, the user is less affected by frictional costs, can use lower position size since variations are higher, and can allow for more advanced position monitoring.

[azure island]

Hi there, any reason not to use HA (Heikin Ashi) candles with LuxAlgo?

[indigo cradle]

@azure island HA works 🙂

It's just smoothed data so keep that in mind

[errant cloak]

👍

[gray wedge]

Question, is meta trader 5 the one everyone uses for forex and commodities

[fair sonnet]

Youtube lux algo was gone???

[indigo cradle]

It went down for a little and should be back soon 🙂

Most of our videos are still in #👀luxalgo-news though 🙂

[fair sonnet]

Oh I see thanks

[digital radish]

@indigo cradle sorry if this has been asked 100 times but when will Optimizer settings be working again?

[indigo cradle]

@digital radish it's working :)

Optibot has been posting :)

Was all fixed 2 days ago

[digital radish]

weird 1H still reads March 22nd settings...#797529997731561522 message

[indigo cradle]

Ah yes, it was fixed Wednesday afternoon

And the 1h posts on Wednesday and monday

So next Monday it'll post :)

[digital radish]

you peeps rock - thanks

[dense palm]

Hi, I just started trading

Is there a way to show sl and tp hits?

[feral lava]

We have a TP/SL levels feature you can use

https://luxalgo.com/apps/help-center#hc-tpsl-levels

[dense palm]

Ahh I see, thanks 😉

[novel whale]

Is there a way to get the optibot setting to stick for each crypto pair you have listed? If i go to optibot15m and set the lux algo to the ETHUSD settings and then go to BTCUSD and do that setting, if I go back to ETHUSD it now has my BTCUSD settings... very frustrating. when trying to jump around.

[feral lava]

optimized settings will always change overtime with varying market conditions between assets and timeframes

if you want to put it on auto-pilot, you can use the "Use Dominant Cycle Period" setting

https://www.tradingview.com/x/z4ShVlop/

when enabled, the algorithm no longer uses settings, however it's not as "accurate" as adjusting the sensitivity with the Recommended or using Optibot

always trade-offs, just have to do what you find best for your trading style

[wide cypress]

I am not receiving any alerts notification on phone, can anyone help me here ?

[feral lava]

make sure notifications are on for the whole server

it tags @ VIP so you should get notified

maybe within your phones settings too

[undone kernel]

The photo was a mistake

[feral lava]

Hey @undone kernel - email [e-mail] for anything relating to your order/subscription

[undone kernel]

I did. About 45 min ago. No response yet. Do they have certain hrs where they are online to help people?

[feral lava]

yep will be within an hour @undone kernel

[vast nest]

does the optibot settings also work on the BTC-USDT?

[feral lava]

yep see the list @vast nest in #800747939226976266 #797529919499272224, etc channels

well, BTCUSD -- near identical data

as to BTCUSDT

[vast nest]

perfect! thanks 🙂

[feral lava]

no problem!

[sudden badger]

Hello, i have purchased monthly lux algo. But still not active yet. Already sent the email also to support. @indigo cradle can you help, sir?

@feral lava

[feral lava]

Hi, you should be active since you’re in VIP chats

!guide

[jaunty perch]

Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI

Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide

[feral lava]

try refreshing & then go through our guide

[sudden badger]

Still locked 😂

[jaunty perch]

@jaunty perch @feral lava
Hi. I think there is a problem. I'll try to explain the situation:

I've set up an alert with the crypto MIOTA. Once per bar close, 3h timeframe, Sensitivity 19 (the recommended one by Lux Algo).

According to the algo I should have get the notification on 30 Mar 2021, at 17:00, but I got the notification on 1st April at 6:00.

I am not sure that the algo sends the notification on the selected sensitivity of the moment I am setting an alert.

Let's say I set an alert for MIOTA at sensitivity 19 and then move on with another ticker, let's say BTC at 30 sensitivity. I think that the algo remembers only the last sensitivity setting used on Tradingview. If I let my tradingview on 30 sensitivity and close it, all the alerts will trigger at 30 sensitivity.

[indigo cradle]

@pine sleet did you change the sensitivity or settings after setting the alert?

[jaunty perch]

I need help setting the signals. So many channels and I am lost

[jaunty perch]

Yes, I have to change it for every ticker to get the best results

[shy relic]

do you mean setting alerts?

@jaunty perch see https://docs.luxalgo.com/getting-started-with-luxalgo/setting-up-alerts-on-tradingview and https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts 🙂

[shy relic]

once you create an alert, this one will always be based on the symbol, tf, and indicator settings used during its creation, changing the settings of the indicators afterwards wont have any impact on that alert. Note that the time appearing on the alert log can differ from the time on your chart.

[jaunty perch]

Thanks for manual

I will read it first 😉

[jaunty perch]

I understand, thank you.

A little suggestion if I may. It would be really helpful to show to sensitivity setting when adding or editing an alert to make sure that the setting is correct.

Thanks 🙂

[jaunty perch]

but I don't know if you can do that, or it's a tradeview thing

[shy relic]

yep thats unfortunately a tradingview thing. You can eventually add the sensitivity value in the alert name or message in order to see it in the current alert lists 🙂

[jaunty perch]

Oh I see. Thanks for the tip 🙂 I will definetly use it.

[wheat lantern]

Can I ask a simple question??
I in my TV account and I don’t know what’s going on cause both my brokers and TV seem to be going through the same thing in terms of giving updates for today on 02 April chart instead I have been given yesterday chart

Clearly it’s the 2nd of April and I have no idea as to why XAUUSD/GOLD is saying it’s still the first

[shy relic]

this can be caused by the timezone you select for your chart, change it to your timezone and you will see its april 2 🙂

[wheat lantern]

My time zone has been ticked

Are you experiencing the same problem or do I have to change my phone

I’m very confused because whatever I log onto the result is the same

[shy relic]

I think its simply due to the fact market is closed on april 2, both XAUUSD and XAGUSD will be unavailable to trade.

[wheat lantern]

Ok thank you so much for that I’ll wait for Monday thank you for update I hope you have a great weekend

[jaunty perch]

Do I need to keep my computer on, or LUX is running on Tradingviews server ?

[shy relic]

the alerts will run on the servers 🙂

[thorn elm]

Why the Optibot 1h and 4h not updated from last few days?

[sturdy sinew]

i dont know what i am doing wrong bought it since yesterday and follow signal and made all lost. 700 under 24 hour

[shy relic]

we had some problems with optibot, but now its back, for 1h and 4h it will update once per week on monday

[shy relic]

the signals alone must not be used to trigger trades, its always a good idea to have an additional filter, most of the tools in the indicator can be used in confluence with each other. If you see that the price has significantly moved before a signal, you can eventually deduce that this signal might miss the timing (price going in a opposite direction juster after the signal, causing a false signal)

[wide cypress]

Any view on GBPCAD 2H alert Buy entry at current price ? It's still going down though strong signal

From yesterday, no multiconfirmation is working to gain profits running all in red

[indigo cradle]

A few things with that one to be watching:

State in dashboard was ranging, lux volatility very low

And the recommended sens as a result was 30

Which will help clean out those signals in ranging markets

[jaunty perch]

optibot still down?

[indigo cradle]

@jaunty perch Nope it's up 🙂

It's just that the higher timeframes run on monday / wednesday

And it was fixed on wednesday afternoon

So 5m should be working

[safe marlin]

Hey team - do you guys ever have beta testers? Would be more than happy to test 🙂

[indigo cradle]

We don't currently but if ever we decide to we know where to come 😉

[jaunty perch]

Is there no 1m for lux

[feral lava]

for optibot 5m is lowest

[jaunty perch]

where can i find the rocommended stop loss and take profit levels that lux gives us

[feral lava]

https://luxalgo.com/apps/help-center#hc-tpsl-levels

[jaunty perch]

i dont know how to add it to my chart though

[jaunty perch]

thanks

[jaunty perch]

helo!
I need some help.
My alerts is not in sync with my signs...
how could it possible?
I got an alert, but nothing is on my chart...

[indigo cradle]

Which alert did you select?

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#luxalgo-premium-alert-conditions

You may be getting alerts for "Buy turn strong"

Which is documented here; that's if you've selected it

[jaunty perch]

I hav more... for example BNBBUSD....

[indigo cradle]

Yes but your alert settings

[jaunty perch]

Yes it was selected...

[indigo cradle]

Then yes you're getting alerts for a normal turn strong

https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#luxalgo-premium-alert-conditions

See here ^

[jaunty perch]

ok i see

I yuse th script in the message field

and th ealert message has "buy:1"

but there is no buy sign...

it was a buy turn strong?

when I change the setting (for example unthick some signals), I have to make a new alert ?

[indigo cradle]

Yep if you untick you'd need to reset the alert

[jaunty perch]

thank you

there is any more option to the message script?

like this "Buy : {{plot_0}} | Sell : {{plot_2}} | Strong Buy: {{plot_1}} | Strong Sell : {{plot_3}}"

[shy relic]

you can use many placeholders 🙂 see https://www.tradingview.com/blog/en/introducing-variables-in-alerts-14880/ for more info

[jaunty perch]

thank you

I think if I use the "dominant cycle based confirmation signals" setting, the alerts and the signs ar not in sync...

[indigo cradle]

They will be you'd just need to remake the alert

The alerts use the signals at the time of setting

[jaunty perch]

ok.

[slate brook]

Hi

How to get the signals on TradingView

[feral lava]

!guide

[jaunty perch]

Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI

Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide

[slate brook]

It is locked

And which one should I choose

[indigo cradle]

If you're in VIP you should have access

double check the TV username you provided to support

If that's correct I can follow up for you and check 🙂

[minor osprey]

You don’t search the indicator it’s say in the email you click invite scripts only it will be there

[slate brook]

Please support

That is the user name

[indigo cradle]

@slate brook Is this the username you provided?

At checkout

[slate brook]

I didn’t provide with my user name

[indigo cradle]

Ah at checkout it asks for it but that's ok; email [e-mail] with your TV username and they'll fix it and give you access 🙂

[slate brook]

Thanks

[lapis sapphire]

How to unsubscribe the plan?

[jaunty perch]

You can enter your email on our website to manage your account here: https://luxalgo.com/tools/recurring/get-subscription-access

Or email [e-mail] and our team will assist you with any request the same day.

[earnest portal]

if i set an alert for a confirmation signal on trading view with custom sensitivity and agility will that only be used for that alert or if i change the settings for lux will it also change the settings for the alert?

[atomic heart]

What should i do

I just bought it

Yooo

It works

Sorry

[indigo cradle]

@earnest portal it'll be for just that alert :)

[vital kraken]

It's the best practice to have alert when we have to BUY or SELL ?

[shy relic]

it can eventually help you know what is the detected trend by the confirmation/contrarian signals, if signals arew important in your strategy, then having an alert is good 🙂

[jaunty perch]

Hi. What setting do you use for alt coin in general?

[minor osprey]

Go to the opti bot it will tell you

[next solar]

where do i cancel subscription

[shy relic]

see https://luxalgo.com/apps/help-center#hc-what-is-your-cancellation-policy-1

[jaunty perch]

guys do u prefer forex or crypto for better profits

[golden bough]

Crypto for me. I like the volatility

[jaunty perch]

can u pm me ur settings ;3?

[golden bough]

I just signed up 😆 . I'm still playing with it.

[jaunty perch]

oh ok ok haha

[hasty lava]

how can i upgrade my account

to yearly

[jaunty perch]

You can upgrade your monthly subscription at anytime during your subscription by purchasing one of our discounted membership plans.

Once purchased, we ensure your monthly subscription is cancelled for you and add on the remaining amount of time left to your new plan so you get exactly what you pay for & are upgraded.

You can find them at the bottom of this page: https://luxalgo.com/products/lux-algo

[feral lava]

@hasty lava ^ our team does the upgrade all for you once you purchase it directly 🙂

[hasty lava]

@feral lava ok and is there any way to check when my current month ends

[feral lava]

Yep, you can login by entering your email on this page https://luxalgo.com/tools/recurring/get-subscription-access

[hasty lava]

@feral lava great thank you

[feral lava]

no problem, you can also DM me your email & i'll check for you

[distant charm]

hello, my payment went through yesterday. how can i submit my tradingview username?

@feral lava

[feral lava]

Hey @distant charm best to email [e-mail] if you gave the wrong username / didn’t provide one - they’ll help within 2 hrs from now

[distant charm]

thank you @feral lava !!

[boreal plaza]

how to install lox algo.?

please help me

[feral lava]

!guide

[jaunty perch]

Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI

Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide

[feral lava]

@boreal plaza

[boreal plaza]

@jaunty perch

like this.?

[feral lava]

try refreshing, they appear locked

refresh your browser/app

if not, please let me know your email & TradingView username so we can ensure you have full access

[boreal plaza]

I have refreshed the browser, but the results are not the same as on YouTube

[feral lava]

should be all set now

[boreal plaza]

oke thnks, im try again

im use broker icmarket, but here there is no icmarket, what should i choose?

[feral lava]

I believe the data is near-identical on FXCM or OANDA as you would see on icmarket @boreal plaza

[shy relic]

I always use oanda, stay away from fxcm since its historical data can differ from its streaming data on tradingview, which can cause indicators to repaint.

[shell axle]

hi

I have been notified by email that it can be used, but it has always been like this in the Trading View interface

[indigo cradle]

You need to remove the other indicators from your charts before adding @shell axle

[shell axle]

how to remove

[indigo cradle]

In the too left you see VOL

If you click on it an X will appear

And you remove it there

And remove the other indicators

[shell axle]

OK，thanks

[urban prism]

For v3.6.1 do I need to change my alarms of I updated my template but keep the same settings

[indigo cradle]

Nope it should all be ok 🙂

[urban prism]

Thanks

[weary sage]

hi , for each setting from optibot, how to save it to each pairs so it is using the correct optibot setting for the correct pair each time?

[indigo cradle]

On TV free you can't save chart layouts sadly

But if you have a paid plan you can save chart layout in the top right

[weary sage]

ty very much

[boreal plaza]

hi,
how do we know where when we buy / sell.?
please teach me
ty

[shy relic]

Users have many strategies for determining entries, but you should make yourself familiar with all the tools in the indicator, see https://youtu.be/xezy6WGpZ8Y for a simple strategy example and https://docs.luxalgo.com for more info, hope this help.

[boreal plaza]

thnks

[jaunty perch]

Is there a tutorial for luxalgo and 3commas.io bot ?

I mean how to setup the alerts and bot etc

[indigo cradle]

We don't provide official resources for this I'm afraid 😦

There may be within 3commas though

[magic vapor]

This would seem like a bug, or at least counter-intuitive behavior. Elaborating...

It's the 1H BTCUSD chart, Lux Algo 3.6.1, with Dominant Cycle Signals set to on. You can see that on the Directional Matrix, the 1H is up, whereas it's a strong sell on the chart. It seems like the chart's signal is coming from Dominant Cycle Signals, but the Directional Matrix is coming from the 12/26 settings for Sensitivity/Agility.

[shy relic]

thanks for reporting, will be fixed.

[carmine horizon]

Is there anyway to setup alerts for when a buy or sell mark is added to the trading view chart of a certain crypto or stock?

[shy relic]

yes, you can set alert based on the buy/sell signal, just create the alert on the chart and timeframe of interest, see https://docs.luxalgo.com/getting-started-with-luxalgo/setting-up-alerts-on-tradingview for more info 🙂

[carmine horizon]

Thank you!!!

[sand arch]

LUX ADMIN WERE ARE YOU GUYS

[indigo cradle]

Hello

[sand arch]

ARE YOU OK SIR (Gecko)

[indigo cradle]

I am ok 🙂 How are you?

[sand arch]

AM GOOD

SO 8 HOURS IS GONE

STILL WAITING

THE MARKET IS OPENNING

[indigo cradle]

If you are in VIP you should have been given access. Double check the username you provided to support. If that's correct, try logging out then logging in.

[sand arch]

OK SIR LET ME LOGOUT BEFORE I CHECK ON THE USERNAME

[indigo cradle]

Yes double check the TradingView username you provided at checkout

But first try logging out then in

[sand arch]

ILL BE RIGHT BACK

OK AM BACK WERE DO I GO FROM HERE

[indigo cradle]

Did it work?

[sand arch]

I JUST LOGGED IN AM ASKING WHAT DO I DO FROM HERE

[indigo cradle]

You can turn off caps it's better in lowercase 😉

!guide

[jaunty perch]

Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI

Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide

[indigo cradle]

Here is the setup guide

Follow this video

[safe marlin]

||Inside voices ||

[sand arch]

ok a m in so how do i get all the forex currency

should i load my broker on the trading review or how does it work

[meager seal]

Is there any settings for US30?

[indigo cradle]

@sand arch You open the pair on tradingview you want by searching for the pair

@meager seal Yep within optibot 🙂

[meager seal]

I didn't find it!

[indigo cradle]

It's tracked using the ETF

[meager seal]

Thank you

[weary sage]

hi thank you i am new and now have pro paid Trading view, i would like to know how to save different pairs with the optibot settings, so that each time i change chart i dont need to come back to find the settings and manually reset each time

[shy relic]

the best solution atm is to use indicator templates, you can save specific layouts, including indicators and their settings, symbols and timeframe. See https://www.tradingview.com/support/solutions/43000543048-what-are-indicator-templates-for/ 🙂

[weary sage]

thanks alot will try out now

[topaz swan]

there is no 1minute time frame on the optibot?

[weary sage]

apparently its the same settings used for each different charts so need to re-set sensitivity and agility

[shy relic]

not at the moment

[topaz swan]

So its reccommended that its better not to touch or change the settings of lux algo?

[topaz swan]

i only trade at 1minute chart

[shy relic]

you can always use the recommended sensitivity or the confirmation signals based on the dominant cycle period 🙂

[dry zephyr]

when the bot gives signal which sensitivity&agility is applied? from optibot? If it is from optibot then latest shared optibots measurement is valid? Because optibot doesnt renew itself all the time

[indigo cradle]

The discord alerts?

!visible

[jaunty perch]

Our Discord Market Scanner alerts all use the following:

• Default Lux Algo (V3 inputs).
• Normal trading hours (no extended hours)
• Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE

If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).

[dry zephyr]

yes

[indigo cradle]

It uses the settings as above ^

[earnest portal]

Can I implement lux algo onto a scanner?

[dry zephyr]

so the optibots numbers are valid? or the bot adjust its settings and give signals? what I am trying to figure out actually is I got signal from usdjpy 2hr buy signal. But I can't see the signal on my chart

[indigo cradle]

@earnest portal Sadly TV doesn't support this yet :(

@dry zephyr The scanners use default settings, if on your chart you are using optibot/custom settings the signals won't line up

[dry zephyr]

Oh I see now, bot use default settings (12&26) but we use option recommendations when we trade our own pairs bot didn't signal

optibot recommendations*

[earnest portal]

Will Lux Algo ever have a recommended agility in the future?

[feral lava]

Possibly, as of now it's just best used with optibot

using two settings to adjust is not the most optimal user experience -- but with optibot it can make the signals quite powerful

[noble sigil]

I will choose powerful signals over user experience any day.

[spice palm]

@indigo cradle how do I refer someone to lux algo as a potential customer?

[feral lava]

!affiliate

[jaunty perch]

Sign up to be an affiliate for Lux Algo & get your own custom referral link: https://luxalgo.refersion.com/?oid=74006

[meager seal]

It is so confusing

[feral lava]

!resources

[jaunty perch]

Link to our resources page, lots of information regarding our features & FAQ's can be found here: https://luxalgo.com/apps/help-center

[feral lava]

!docs

[jaunty perch]

Lux Algo Full Documentation & educational resources: https://docs.luxalgo.com

[meager seal]

So I don't enter a trade now until I get signal alert?

Lets take Gold as an example

Confirmation Buy and Contrarian Strong Buy

So I can take a buy position?

[noble sigil]

I would suggest you go through the videos on their website. It will help you a lot

[meager seal]

It is not detailed

That is why it is confusing

[feral lava]

https://youtu.be/xezy6WGpZ8Y

Our docs are very detailed, however our youtube videos may be simpler to understand ^^ see here

[vivid forge]

Super silly question: how can I work out what the agility figure being generated is for the "Dominant confirmation signals" ?

I'm absolutely stumpepd

[feral lava]

Yep Dominant Cycle

[vivid forge]

So where would I find that numerical figure? Not on the dash I can see on 6.1?

[feral lava]

It’s within Advanced Settings

above agility

to enable

[noble sigil]

is the % refering to the probability of the decreasing trend, or the probability for a reversal?

Also, what is the interpretation of the 80% on COnfirmation MTF?

[vivid forge]

Thanks Macl; I've got it enabled. I can see the Sens/Agil changing on my chart; what I can't find is that value recorded anywhere I can see. I use an older version of the algo for my alerts due to the current limitations; so I transcribe the values generated from 3.6.1.

[brittle wedge]

lol...sorry, someone else literally just asked that. i should have read some threads first

[torpid rock]

hello

is recomendable to buy for example in a strong signal??? or only has to be where the signal is buy???

[jaunty perch]

how do i cancel my payments?

[spare grail]

Lux Oscillator I have query regarding Institutional Activity value, in that Activity Level High means institutions buying at that zone or selling at that zone?

[feral lava]

!cancel

[jaunty perch]

You can enter your email on our website to manage your account here: https://luxalgo.com/tools/recurring/get-subscription-access

Or email [e-mail] and our team will assist you with any request the same day.

[feral lava]

it’s just indicative of opening positions, up to the trader to determine whether up or down

[spare grail]

thank you

[vivid forge]

Request: Ability to put in a message for any alert() TV triggers. Weirdly it seems to be the only alert condition that doesn't allow messages in the alert body

[torpid rock]

strong??' or to buy?

[boreal plaza]

After I learned the basics in the Lux Algo YouTube video,
When Notice Strong, and continue with the POINT 1 bar, go to POINT 2 "lower / higher" << there we take a BUY / Sell position
Is it like that.?

[hybrid prairie]

My lux algo chart doesn’t look like this

How do you guys set it up

[polar furnace]

I’m getting study area not authorized

[torpid rock]

[feral lava]

https://youtu.be/5wtdY51crnc

[feral lava]

Try refreshing, if it still doesn’t work — email [e-mail] your TradingView username. This likely means we received the wrong one

[polar furnace]

Ok thanks

[jaunty perch]

Hello! Does anyone tried PocketOption

is it good?

[boreal plaza]

please answer my question 😄 @feral lava

[jaunty perch]

Hi! I purchased and received the confirmation email. But I still don't see the Ïnvite only script" on my tradingview account.

[topaz swan]

just wait 6 to 8 hours for activiting your account on trading view

[jaunty perch]

@topaz swan Thanks!

[topaz swan]

in what platform did you trade?

[cinder bluff]

@feral lava Is it possible to use older versions of Lux Algo Premium.? After upgrading to v3.6.1, I believe the signals appear rather different when the dominant cycle setting is enabled vs. the 'auto' settings in v3.5 and v3.4.

[indigo cradle]

@cinder bluff They will be 100% identical :)

[cinder bluff]

I see. But strangely enough, I seem to getting very different signals. Any clue as to why? And, alternatively, can I have access to older versions for comparison?

[indigo cradle]

Sadly we can't give older version access but it really should be identical, do you have an example?

[cinder bluff]

Hmm. I will double check my data and try and provide files demonstrating the difference. Give me about a day or two.

[shy relic]

No changes have been made to this feature, so there shouldn't be a difference, I applied a previous version (3.5) of the indicator using 'auto confirmation signal settings' and applied the most recent one (3.6.1), the 3.6.1 has signals in orange/blue, while the 3.5 has signals using the default colors, the 3.6.1 signals overlap the one of the 3.5, indicating that both are the same 🙂 Please let me know the timeframe/symbols where you think you perceived a difference.

[cinder bluff]

NIFTY1!, 30m.

I'm then exporting the signals to a CSV for backtesting.

[torpid rock]

uff... only loss

say sell.. and go up ..

[shy relic]

both matches, we will look into this more but be at ease, they should not differ 🙂

[cinder bluff]

Thanks! That's good to know. I'll dig into it and bother you again in case I can't reconsile the two.

[shy relic]

its important to use additional filtering conditions if you want to use the signals, for example, avoid any signal occuring when the market is ranging, if you see that a signal appear late (that is the price has moved significantly before the signal) then you might fear a potential retracement, in which case you wait for the price to reach a certain indicator (MA, EQ Cloud, Rveresal zones) to open a position.

[shy relic]

please do 🙂

[cinder bluff]

On the subject of ranging, which indicator would you recommend so that this can be tested in a backtest?

[torpid rock]

thanks!! 🙂

[indigo cradle]

In Ranging markets reversal zones or the TPSL tool work great :)

[shy relic]

@white oasis make sure to read our docs https://docs.luxalgo.com and see https://youtu.be/xezy6WGpZ8Y if you need information to start 🙂 Please keep request for help out of #💰share-profits

[weary sage]

does luxalgo work with EA automation?

[shy relic]

It eventually can by using other services such as 3commas

[jaunty perch]

how to add new version in trading view id ?

[jaunty perch]

this new method not shown in my account

[shy relic]

remove the indicator from your chart, and add it again from the invite only scripts, like you did the first time

[jaunty perch]

oky done

[wide cypress]

Does it support mt4 platform ?

[shy relic]

no, for mt4/mt5 alert integrations see tradingview connector

[glacial ridge]

Hello i cant see the market scanner channels on discord

[shy relic]

you have to enable them from #🔔scanners-premium 🙂

[glacial ridge]

thanks 😄 lol

[stray ferry]

Hey a question, its not auto renewal when my lux is running out right?

[indigo cradle]

It's a subscription

If you wish to change something:

[jaunty perch]

You can enter your email on our website to manage your account here: https://luxalgo.com/tools/recurring/get-subscription-access

Or email [e-mail] and our team will assist you with any request the same day.

[stray ferry]

Just getting this when i click the link in the email: https://gyazo.com/d067c447d9928d71c0f045790a277e44

[safe marlin]

Hey Team,

FYI, when TP/SL Levels Feature is turned on, formatting on the dashboard goes out of whack 🙂 this is on 3.7*

[indigo cradle]

Email [e-mail] for assistance with this

[shy relic]

thx for reporting, will get fixed

[stray ferry]

Alright

[shy relic]

what is your tradingview username?

[vital kraken]

The signals of view scanner are different than tradingview ?

[shy relic]

no, the scanners use default settings, applied on normal candles, they should be the same 🙂

[vital kraken]

Ok thanks you

[safe marlin]

rcb213

[lunar gulch]

Do we have optibot for crude oil? Seems like no

[safe marlin]

@shy relic you guys are so quick!

3.7.1 TP/SL feature formatting fixed 🙂

[indigo cradle]

❤️

[cosmic folio]

getting annoyed by this, its happening very frequently

[shy relic]

which version of the indicator are you using?

[cosmic folio]

3.7

[shy relic]

did you enabled the institutional profile?

[cosmic folio]

YES, is that causing it

[shy relic]

its the only thing that could cause it, but it vary from user to user, we did not notice this problem

we will check this more in depth, thanks for reporting

[cosmic folio]

ok thanks, i will manage it for now

[misty falcon]

any video on how to read the Spyder dashboard?

[shy relic]

not covered in a in depth video yet, but see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/dashboard#spider 🙂

[misty falcon]

Excellent info there, thanks

[old sage]

what happen here

[indigo cradle]

Some market ranging

Makes some chop

[feral lava]

hit R2 as well

[shy relic]

crossing under the moving average to

[azure island]

I bet it's going to be something obvious but I'm stumped: I cannot get LuxAlgo to show up in the conditions of an alert. Yes, I did select conditions in the indicator settings.
¯_(ツ)_/¯

[shy relic]

you might need to scroll down 🙂

[azure island]

🙂 Nope, I wish! I even removed some other indicators from the chart. Just makes the drop down smaller but Lux never shows up

[shy relic]

strange, try to logout and login again, I will take a look into it

[indigo cradle]

@azure island Refresh the page 🙂

It's appear

[azure island]

No way! You were correct! Thanks! What's surprising is that, since joining Lux last week, I've never managed to get Lux to show up in the alert panel, and I even rebooted my computer 2 days ago... You'd think that would count as a refresh! 😠 😄

[indigo cradle]

hahaha no worries 😉

[azure island]

BTW, while I have your attention, just gotta say: The Lux documentation is excellent! Fantastic work! 👏

[indigo cradle]

Thank you 🙂 That is all Mr Grover's fantastic work

He is a talented man

[errant cloak]

Hello Support, i see that trading view has an option called "strategy tester". I use the 1d time-frame. Is there any way to automatically test which sensitivity/agility settings have the best performance on 1d time frame, apart from making your own spreadsheets with custom date ranges as this require valuable time?

[shy relic]

unfortunately not, for settings see optibot and the recommended sensitivity in the dashboard

[errant cloak]

ok thanks very much. any news with 1d optibot settings?

[azure island]

Sorry gents, this isn't strictly a Lux issue but hoping you have an idea. My alerts don't show message fields, nor options like "Once per Bar Close".

[shy relic]

not yet, it always depends on the amount of request we receive.

[shy relic]

the 'Any alert() function call' condition does not come with a message field, this is normal 🙂

@azure island select a different condition and you will see the message field appear

[azure island]

Ah! Got it! So (in my case) I choose "Any Confirmation" and then can set the info I want. Cool, thanks! 🙏

[errant cloak]

Hi Support, another question: The recommended confirmation sensitivity on trading-view, changes constantly(i.e. a few times per month). Can you explain more about this approach

[shy relic]

the market has changing conditions, so of course the recommended sensitivity will change 🙂

[errant cloak]

i see, i am trying to do some backtracking on which setting works best on the 1d chart during a 1-year time frame...

[shy relic]

the recommended sensitivity is using 1000 bars for the search of an 'optimal' setting, so it takes into account data previous to a one year period.

[brittle wedge]

Do the updates get automatically pushed to our TV accounts or is there something we need to do?

[indigo cradle]

!update

[jaunty perch]

To update Lux Algo Premium indicators, refresh your browser/app, remove the indicator from your chart, and then add it back to your chart + save your chart layout on TradingView.

Full guide: https://luxalgo.com/apps/help-center#hc-how-to-update

[errant cloak]

Another question. Is there any chance that the confirmation signal may be displayed once per bar opens and not when the bar closes? Can you elaborate a bit more the difference between once per bar close and once per bar as it seems that many times we miss lots of valuable time...why to always select once per bar close?

[indigo cradle]

That's down to the user's selection. During the life of a bar violent price movement / fakeouts can occur so waiting for close can often be regarded as safer

If the user trades with higher risk and has a strategy in place it's fine to enter before the close

However as standard we recommend waiting for close as it protects against some of this noise

[errant cloak]

I trade in 1d time frame. Is there any chance that during this time frame, the confirmation might change/be removed? So far, based on my statistics, if we have a confirmation once per bar then we have the same confirmation when the bar closes(i am speaking about 1d timeframe)

...however valuable time is lost sometimes getting in/out of positions by waiting for the bar to close...if you tell me that this happens quite often, and in 1d timeframe as well i act accordignly

[indigo cradle]

Yep absolutely the signal may appear / dissapear during the life of the candle

So backtesting this behaviour is quite hard

[errant cloak]

aha...the signals that appear during past dates on trading view are always once the bar has been closed, right?

[indigo cradle]

Yep always ones that have closed

[errant cloak]

And last question. Each bar is equal to the time-frame you have set, right? So for example, if your time-frame is 1d each candle is a day - right? And if you set the once-per-bar-close, you get the signal the NEXT day(after the bar closes), right?

[plush robin]

How do I set different sensitivity and agility for each ticker? I just realized that every time I set it for one, it applies to all.

[spiral hazel]

Does optibot have recommended settings for US500? Or would this be the same as the DIA / US30?

[indigo cradle]

@errant cloak Yep each bar is made per timeframe

Correct

@plush robin When setting the alert it will keep and use the settings you had

e.g. if settings TSLA with 20,20 it will keep 20,20

And then if you go to GBPUSD and use 50,50

It will keep 50,50 for the alert

@spiral hazel We have SPX

[plush robin]

How then when I click on the different alert and go to setting it will give me the setting of the last ticker I set, not the setting, as I made them on the alert. i.e I set TSLA 20, 20, then GBPUSD 50, 50, if I click back on TSLA and go to settings, it will display 50, 50.

[indigo cradle]

The alert will be using the settings you had at the time of setting

Just the chart when you change back will have the settings you have open

The chart itself won't remember the settings you had open but the alert does

[plush robin]

Ok, great think you for clearing that up

[stable sun]

I need a mentor 😔

[shy relic]

you can see @jaunty sage in #776138690007007292 , learning from him might help you 🙂 You can also see our docs, they can help you go in the right direction https://docs.luxalgo.com/trading-best-practices/introduction

[hollow canopy]

Oh no

I'm seeing an issue trying to do the Volume Profile

I enabled rolling POC and flip histogram

[indigo cradle]

This is on our new free script?

[hollow canopy]

Yes

[indigo cradle]

Try hiding and re-unhidding

That's a very long loop time