#๐คsupport
1 messages ยท Page 8 of 1
is there a way to send an alert when trend catcher changes colour?
Yep there are in built alerts for trend catcher up and down ๐ค
is that under the "Filtered alert" section?
I wasn't sure because of the word "Filter", i presuumed that the allert will only get triggered when there is a confirmation signal
If you go to alerts
select lux algo at the top
then the next box you'll see them appear ๐
thanks! ๐
@indigo cradle can i dm u
Yep ๐ค
Hello admin i dm something please check
Replied
Hello guys . indicators cannot be found on tradinwiew
Could someone help me ? I wrote an email to support please help
Hello guys! Can you tell me please what does it mean the green cloud on chart? Thank you (don t laugh I am very novice to this) ๐
Hi all , I wanted to know if there is a way to set an alert when there is a buy signal and the trend catcher also turns green.
Similarly when there is a sell signal and the trend catcher also turns red.
Liquidity grab areas; can be used as support and resistance.
Hi there; have you connected your account?
You can use the filtered alert creator here. Select buy and trend catcher up
ok So for sell it would something like this ?
ok thanks
@indigo cradle This is how the predictive ranges look on my screen. Only show up on the extreme left of the screen
Any ideas?
No, this is on my laptop - macbook air. Every other indicator I have works just fine.
Weird. I just downloaded the app and it works fine.
@indigo cradle when we can see new video of possible a mixture of support and resistance with all order block trand line liquidity zone with lux profile in combination in one video๐
Hi @modern gulch Email support@luxalgo.com for help with orders / payment - they will assist you right away ๐
@feral lava @indigo cradle could you please guide from where I can enable support and resistance line?
Is there a best way to trade reversal zones? I have yet to figure this out on the premium package
v
Get instant access: https://luxalgo.com | From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Tr...
this video can help w/ reversal zones & other features!
In this video I show how you can maximise your success with Lux Algo's renowned and iconic Reversal Zones.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#reversal-zones
this one too!
How long does it take until I can use my Indicator
instant
What's the meaning behind gray, red, orange and blue levels ? Thanks in advance
red= resistance
orange= mid level
Blue= support
Now i feel stupid for asking the question in the first place ๐คฃ...what about grey ?
it's alright man, gray is the chart patterns like when it is making higher highs, higher lows, break of structure and so on
God bless ๐
good luck bud
so i loaded the lux algo premium and it says i have no permission
but its showing on my invite only indicators
How accurate is your scalper signals?
signals are never accurate
Your signals are repainting
They are not
0 repaint sir
On the bar close they won't change at all
Great. I saw before the bar closed. Now its clear
Yep
Before bar close it can change
But that's the same with almost every indicator
MACD, RSI, Moving averages
All change during current bar
Appreciate if you can let me know the success rate of your scalping signals. The take profits and Stop losses
!accuracy
Information regarding back-testing data and % accuracy: https://docs.luxalgo.com/faq#whats-the-accuracy-of-the-signals
Get answers to frequently asked questions including how to get access, product questions, and everything you need to know regarding payments.
Question: Is there a way to set up an alert for CLOUD EQ? So when it moved from blue to red or red to blue is there a way to setup an alert?
45min time frame on optibot ๐
Is SMC as good as reported?
I believe this question has been asked before, I searched this channel could not find an answer. If I have the Oscillator set to Ultimate MACD, how do i configure the alert settings to get an alert for when the Ultimate MACD oscillator changes from red to green or vice-versa? I saw answers for the Oscillator Advanced but not for Ultimate MACD. Thanks!
email support@luxalgo.com for help w/ orders @empty magnet @long vigil
yes it's most popular indicator on TradingView for the past month, but our premium (paid) SR script is going to be better than it ๐
should be able to select the histogram --> crossing 0
Sell Alert delay 5 x 5min candles delay any idea how to get it more exact thank you
Isnโt it only for Trending, not Ranging Markets.
ok thanks
Hello befor i bought lux Premium I used the nadarayan whatson Indikator from lux Algo. Now i want to set the contrarian mode in the way that the algo works like the nadarayan whatson. Do you habe some tipps for this idea?
Contrarian 
So itโs not out yet. Part of the November extravaganza right?
yup!
?
2 months with you & still I have a lot of wrong signal ! T tested all your parameters setup & still I have some issues ? can you help me in this issue?
Hey, is there a way to get agility back on the mini dashboard
can someone give me a really good working strategy with timeframe and currency pair??(i am new here)
Hello, is the advanced oscillator also an momentum indicator too ?
yes the predictive green/red waves can be used for momentum ๐
Hey people. Does anyone know which Lux Algo indicator can be quite profitable for binary options? I would like to operate on 1m - 5m time frames.
If anyone knows, please tag me.
Quando vai ser lanรงado a atualziaรงรฃo de Novembro do Lux Algo?
I'm new and ik it sounds stupid but I need the best indicators for starting
I bought the monthly sub
@feral lava I have already subscribed for a month with the offer, what should I do if I want to push the subscription within 30 days?
If I want to convert to life vip, is there any discount? Will the first month's fee be deducted?
Hi. Just subscribed today so I am new to this indicator. Would anyone mind explaining the context of the red, purple, and green colouring on the candles? Thank you in advance. CC
Hi, trendlines is very bad, it changes every moment to a different trend
Yep months fees will be deducted
!upgrade
You can upgrade your subscription by logging in to your customer account at: https://luxalgo.chargebeeportal.com/
Once logged in, click your account, click on your membership, and select 'Edit Subscription'.
From here you can select your upgraded plan of choice (including lifetime) from the blue drop down menu, see the prorated charge, and click 'Update Subscription' to complete the process.
If you upgrade via this link
Welcome ๐
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Here are our full docs
Green - uptrend
red- downtrend
purple - unconfirmed trend / sideways market
If there any update version of indicators, do we get it automatically in tradingview or should be manual update?
You should have the most updated ๐
Hi lads. Do you know where I could find any manual how to configure lux algo indicators with 3commas dca bot?
hey @[LUX] - Admin (Gecko) !
@indigo cradle thanks for your support!!!
hey guys, I posted a question but seems it was deleted? Did I post something wrong? Here it is again but if its not allowed, please state why
hey guys, what is the "Normalized" indicator on the Oscillators dashboard? Watching aa btc trading video from a year ago and the settings refer to a "LUX" setting which I cant find. Obviously an older version from a 1year old video. Its the "SIMPLE Trading Strategy | Outperforming Bitcoin 2021 (With Lux Algo)" video on Youtube
It was deleted because you posted in a few chats
And I replied to the one in the other chat
So I didn't want other support replying again
oh ok thanks. I posted it in the crypto chat cause it was a video relating to crypto but thanks for the reply.
To get the most accurate candlestick signal with lux Premium version, what kind of candles should I choose on tradingview before I proceed with candles in LUX Algo Premium? @indigo cradle
1 or 2 or 3?
In this video, I show what Heikin Ashi candles actually are; the perks and drawbacks of them and how you can use them in your trading.
Get Lux Algo premium: https://www.luxalgo.com
Yep
Those are built in
aha well done thank you
where do you consider the trend is good enough to get in "trend strength".. I mean after 50% should be quite enough to go long or it has to touch 90%?
Hello friends
Is there a way to save the data of the Agility and the Sensative in a more convenient way than entering it manually tf to tf?
if the algorithm can show us how the trend is strong in many time frames from 1 m to daily would be quite excellent for traders to examine there setup.
Hello, breakout zone feature is removed from "Lux Algo SR and Patterns Premium" ?
Was renamed to liquidity sweeps ๐
Over 50 ๐
which is the best strategy with lux algo that you guys can recommend? i feel like info overloaded hehe
What asset are you trading? ๐
which is the best strategy with lux algo that you guys can recommend? crypto
@indigo cradle
BTC?
Which crypto is most suitable๏ผi feel like info overloaded ๐คฃ
Which strategies have you checked out? ๐
Reversal zones, EQ cloud.I don't know how to use
which is best for scalping?
Have you watched any videos? ๐
I've watched a lot of the videos on the youtube. and not sure which one should i use. it would take me a lot of time to back test each hehe
not sure which strategy are you guys using. the one where it touches and get out of the reversal zone, then wait for trend catcher and eq cloud is good for reversals right?
how about for trending market, which is one is good to use?
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
use this ๐
yes,but i can't find a balance
A balance?
You entered a short?
yes
It's not the worst trade ever; wait for it to play out ๐
did i do it correctly?
Can u check dm please?
It depends on your analysis; there isn't a correct or not correct ๐
Hi
why don't I have lines on the chart like in the video? @indigo cradle
I drew those lines ๐
๐๐
Strong higher low?
What is this "confirmation buy turn strong"?
fail lol
Sir the bot is not supporting the index which need,kindly look into it and help,NIFTY(NSEI)
Which bot ๐
Purple candles turning red / green
LOL
Which option better auto pilot signal or manual signal sensitivity
thanks
Hi admin: @indigo cradle @feral lava
Set alert for liquidity line "Liquidity"
Enable alerts with options:
-
The price goes down and crosses the blue "Liquidity" line
-
The price goes up and crosses the red "Liquidity" line
-
The price goes down and crosses the red "Liquidity" line
-
The price goes up and crosses the blue "Liquidity" line
Hope the admin considers adding a warning feature to this function
So a confluence mix?
How do you set an alert if the price crosses the hyper trend middle line?
Where there is money, there is liquidity
I strongly urge you to consider researching the alert modes for this indicator
Do not fear good sir; we shall take your urges and add more things; the entire script is being overhauled ๐
I don't know how to design the drawing properly like every time I have sketched with my suggestion
This time I don't know how to express it on the drawing, however I am applying the strategy according to that video by "Frankie Candles" and it is quite effective with high win rate
The strategy of the video is to trade in short waves 5 minutes or 15 minutes
So the warning is necessary and we will not have to watch the wave, and we can also use the alert to monitor 3-5 cryptos at the same time. @indigo cradle
#5
hey hey! new here. such fun stuff.
Does any one have an example of a pine script strategy using the 3 premium indicators?
Looking for an example to learn with!!!
I need help setting up alerts with tradingview. Is there any help document or video? For example, does the alert "Any Confiration Buy" take also the "strong" alerts?
here ya go bro
I was looking for that too
Which trading view subscriptions do you guys have or recommend. Pro, Pro+, Premium, works best w Algo
Can anyone answer this?
I use Pro+, I think that's enough for me
Prem is a overkill unless you have like 15 indicators
Is the basic Pro still good?
I use the basic pro and find it fine. You're limited to 20 alerts, so bear that in mind if you rely on alerts.
that's right, reason why I went with pro+ was for alerts
Hi there. I am trying to have my order blocks display. I have the box ticked, but they don't show and I dont know which of the 50 colours is the one that is being used. Any advice please?? Thanks CC
can someone explain the difference between a regular sell vs a strong sell (buy vs strong buy)
nvm found my answer with research: Strong means a signal is going with the trend
Sir the luxbot command one
The luxbot commands one
Is there any other method of payment for the Affiliate Program? As a foreigner in Thailand I cannot use PayPal. Crypto such as USDT?
Hello support, how can i set an alarm on the minimal strong buy (big green arrow up) from the scalper preset? Minimal strong buy is not listed in alarm, does it have another name there? thx
Hi, in one of your youtube Short ( here is the name : This RSI Indicator Strategy Will Blow Your Mind! ๐คฏ) you have 2 indicators, the top one is the ultimate RSI From premium oscillator. but what is the second one ? thanks for your help
Sadly not really; if there was a private arrangement maybe it's possible ๐
Could I see a screenshot?
perfect thank you so much
How do I test with these indicators, for example how can a reference a support area from the SR + Patterns indicator from Pine?
When volume sentiment goes negative does that represent volume of shorts on that ticker? If not how can volume be negative?
They can't really be references cleanly sadly
your joking! for the price of these indicators and I cant back test
or create auto buy/sell scripts
currently nope because it's not really what pine allows for with private closed scripts
Currently
surely you can abstract out events like "price crossing something" without giving away your proprietary source
So:
A few things
In a custom script; one you'd make you can only feed in a single external source
You could feed in the value of a single plot
That's doable
But it's a single single plot
That's possible
If you want to get the value of let's say trend catcher
You can do so
not like ninjatrader then
heres what I wanted to do....
I watched a video linked above by Franky Fingers ๐
Basically, a 1% simple breakout strategy.
That could be so easy to get a little script running for the purpose of:
- Find out if it is profitable (i.e. paper trade every coin)
- Find the optimal % profit/stop for each coin
maybe I can get this working with TV alerts and stand an endlpoint listening
That is absolutely the way to go there ๐
Hey I have a question, is there any videos on strategies/best indicator setup for Scalp/Day trade in stock options?
THE #695668827937177660 gives signal but when i open the chart there is no signal
!Visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
For scalping specifically?
look eos has given sell signal on 4H but when i open trading view i cant see the signal of sell
good question ๐
I need this too
In this video I show some great great methods on how you can use the Nadaraya Watson Envelope in your real time trading.
See NW video here: https://www.youtube.com/watch?v=JpggigF-508
Get Lux Algo Premium: https://www.luxalgo.com
Features used:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#rev...
Waiting for November month update
Good idea ๐
thanks
Can I make alert for that ?
Not really sadly
?
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
cant understand
See the message above ๐ค
Most likely different settings
i saw the msg
its really diffcult to understand i am a scalper its making me crazy
i am on default settings
Can I see your settings?
i can see the signal now i had open the neo filter
Thanks legend!!!
can you change the leverage ?
My gf just signed up and we forgot to add the coupon code. Can she still apply it or is all hope lost?
Welcome GF ๐ which plan?
She just signed up for the monthly. Still waiting on the email.
Hmmm
She didn't get an email?
Not yet. About 10 minutes that's all
This is likely a failed transaction and the payment will be auto reversed with your bank. We suggest trying a new card, using a different browser, or using a different device. We also offer PayPal as an alternative payment option.
Money came out of her account
Yep will be auto reversed in about an hour
It gets insta returned
If not within the next few hours @ me
But it will return ๐ค
Oh okay
Does optibot work with Futures?
She just got an email from support saying she did not finish checking out. Is this automated?
That's automated yep
Okay. She's going to try again and then wait for the other one to return
i entered there i am using 45mins my sl is at orange line i am scared that the pattern will continue what do you think?
hello everyone, i'm a bit lost to test the #๐คluxalgo-bot
How can i try for exemple a buy/sell strat on BTC with #797529997731561522 config?
When will i get the tools in my trading view.. at the moment it only shows a red mark
I have paid the premium amount
Hey , I just registered wrong discord account to vip mail , can I get this vip access to my another account and remove from this
when new update will be released?
Does optibot support futures; ES specfic
The autopilot signal works for all type of crypto currency and every timeframe ? or only for the list in the optibot ?
@indigo cradle Ask for assistance with a problem with "any alert() function call condition" , please help.
HI all. Very new to Lux but wondering how to get the bar off the screen as it is annoying?
THe writing across the screen?
In November ๐
It would be extremely messy for this; why not set separate alerts?
Right click chart
Symbol
Hide indicator arguements
Didnt do anything except make it smaller and then a row of dots across the screen instead of writing- even more annoying
Also unchecking Indicator Values- that helped a lot
Yep that will do it ๐ค
So I hope that the signal message can be added separately, like this
In this way, when setting an alarm, only one group is needed.
- Yep you can use the filtered alert ๐
- You would need to make a new alert
- You would need a new alert there
- Another new alert sir ๐
hi, I have a question about the TMO (Triangular Momentum Oscillator & Real Time Divergence) indicator. How do I set the Alert for a bullish or bearish divergence?
Thanks in advance
Thank you for your help sir
Hey is there any way to add an alert when the mac d crosses?
I would Need this too ๐
Nvm think I got it
How?
Sadly not possible
You select histogram crossing 0 ๐
Yes but you can choose a bullish or bearish signal. I dont know in which order to place them
Those are labels rather than actual alerts
Ok, you say its not possible? I think this would be a main feature for this indicator because without its impossible to see the signal in that moment where it prints, except you are alwas at the charts
i work with optibot 5 m settings but i wait 3 H and i dont get any signals wtf
i work with forex
i wait 3 H but without any signals why ??
Is there a divergence Indicator which gives you alerts?
Which Forex Pai do you trade?
I guess its normal
this photo with robot settings ??
yes
More signals doesn't mean better
More signals tends to mean worse
Advanced oscillator
Has real time divs and alerts
Turn off NEO filter
but NEO filter is good for get strong signals to buy or sell
Or do you have anything better that you would recommend?
Hello everyone. Can you please tell me where I can see the algorithm for setting the indicator Lux Algo Premium 5.2 version?
Thank you very much, I saw your video on YouTube ๐
It can be quite nice yep ๐
It's good at filtering trends
The settings?
๐ค
hey, is there an optibot for normal QQQ if not, whats the best for hourly and 15m?
@indigo cradle I mean setting the parameters of the indicator.
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
I took membership and added tradingview user name, still when I am adding 5.2 V its not taking, can you help?
Website or desktop?
website
Hmm damned sorry can't help lol
I had the issue earlier
but when I went to the website it was available
Got it, I need to logout and login back
Gecko, do you have a video about using Institutional Activity in a strategy?
Yep ๐
ty ๐
i know is one of the most answered question on server
but i want to know which is the best way to adjust sensitivity and agility
Hey, what time frame should I stick mostly for "swing trading" crypto? I'm doing 4h (+1d) but maybe 1h would be beter? (Im trying "neo cloud" strategy )
backtest it yourself or use optibot i would say. note that agility doesnt do anything to contrarian signals
Hey just purchased and looking for a strategy to start out with, preferable something on a 1 hour time frame with crypto and easy for a beginner. What do you recommend?
guys please any one use lux algo and have good strtage can share it plz share it

is anyone can explain me what is sensitivity and agillity thank you
How do I find the optibot settings for futures tickers? (ES, NQ, CL, etc..)
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page explains ๐
Those aren't available currently but you could use the dashboard
thank you
is there a suggested/reliable pattern detection "number" for the 5min chart? I have it on 1 for the 1 min chart and its really accurate since the 1 min moves so much....the 5min just said one pattern and then updated and says a completely different one...so i assume i need a number higher than 1 for the 5min?
When is the SMC replacement?
@sonic lichen may I ask what settings / time frame are you using for US30 ? Thank you
Hello all. Does anyone know how what settings the "Autopilot" uses for the Premium indicator? I thought it was the recommended settings from the dashboard, but noticed that isn't the case. Thanks!
Whenโs the November update coming, what date ?
Hi , how is it possible to make an alarm combo. Strong buy displayed when ultimate oszi is above certain value?
I set the alert for any confirmation buy but didn't receive a notification. Does anyone know if I set this up right?
Alert should have triggered at 7:00am this morning per the algo trigger
I got it to work
seems like the ALERTS work better on the auto sensitivity, especially if you don't want to change them daily.
@indigo cradle pls help me
Help me open the live scanner functions
thanks you
Can someone explain how does the advanced oscillator work?
any idea on how to set the indicator for break and retest pattern?
Can you help me filter the signals by "POSITION" on the indicators?@indigo cradle and @shy relic
I want to filter strong sell signals '"' STRONG "
satisfy the condition below the indicator line
"HyperIrend" (down or up)
COMPLETELY REMOVED STRONG SELL SIGNALS IF
- STAY ON THE ROAD SIGNAL "HYPERTREND" ( UP OR DOWN )
- REMOVED SIGNALS that are NOT HYPERTREND
This is my proposed sketch @indigo cradle
Similarly, I can also find satisfying signals below the NEO CLOUD red cloud to find entry points, or look for sell signals located above the NEO CLOUD cloud. green Blue****
Or satisfy all 1-3 conditions at the same time
As shown below I only filter BUY or STRONG Signals when
- Located below the blue HyperTrend indicator line
- At the same time, satisfy the condition of being in an uptrend with "Trend Tracer" in Blue
That way I also filter and eliminate buying when the chart is in an uptrend with "Trend Tracer" Red
Hope admin reads my suggestions and considers additions. @indigo cradle and @shy relic Thanks
#๐scanners-premium opt in here ๐
Those are divergences
https://docs.luxalgo.com/lux-algo-premium-indicators/lux-oscillator-premium/advanced#main-oscillator
You want to filter signals basically using hypertrend?
Guys I bought luxalgo Premium please anyone help for 1min and 5min scalping strategy.
Welcome ๐
Generally we'd suggest against trading timeframes lower than 15m
That's not lux specific advice
That's just in general
Frictional costs, overtrading ect
Yeah okay no problem which macd Indicator is good to use in 15mins
Which MACD indicator?
What exactly do you mean by this?
Get instant access: https://luxalgo.com | From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Tr...
I mean did luxalgo has macd Indicator or not?
We do indeed have an ultimate MACD ๐
Thank you i will try this and let you know whether it is working or not
hi, i am unable to acces the indicator in tradin view
i typed my user name wrong .
Yes
I recommend the addition of the HyperTrend indicator
At the same time I am also filtering the alerts based on the "LOCATION" of the alerts for LuxPremium indicator classes
Please take a moment to read and see my photos above
Thanks you very much @indigo cradle
This here
and This here
Give support@luxalgo.com an email and they can swap ๐
What is a "signal location "?
The "position" of the BUY OR SELL signal can be above or below the indicator lines
The position of the label isn't really important or any reasonable metric to use
The close of the bar is
But the postition of label is purely 100% visual
The position I speak here is the position of the whole body of the candle
Ah I understand ๐ค๐ค๐ค
In the same uptrend (Filtered NEO CLOUD)
There can be many different BUY candles
But the position of the BUY Candle above or below the Indicators, will give different meanings.
I want to pass the filter
In order to find and filter only the signals Above, or below, 1 or 2 indicators that I want, the indicators that are outside or opposite to the position to be filtered, will be removed and do not participate in the process. set an alarm for my alerting
Added position filter element and signal cross "candle body" with indicator overlays, Between indicator overlays intersect
That's worth diving into and researching
There are many winning trading patterns out there
With this example you will clearly see the Power of Positional Signal Filtering
In the picture shows
If I place an automatic BUY order at the BUY exit points as shown in the figure, I will sell immediately after reaching a 1-2% taget
You will see, all the signals I have circled (Below the HyperTrend line show clear profit
In contrast, ExitBuy points located on HyperTrend, if you buy a plan, you will all lose @indigo cradle
You will see more clearly if you look at these pictures
Thank you for listening
I hope your team consider updating to the latest version
hi there, i have sent the mail to the support , how long does it takes to get activated
Try refreshing tradingview first @bronze burrow if u entered your username it should be instant
support usually responds within 6 hours maximum
alright
if thatโs your active TradingView.com username, just refresh TradingView & youโll have access @bronze burrow
i got it, thank you .
Hi! Is there any possibility to get a signal based on neo cloud trend change?
Hi i just bought LUXAlgo premium.
Yep; you can select neo lead crossing neo lag
can any one help me how to use in binary trading
From where I find it?
If you go to create an alert
you can select those plots ๐
Can't see neo in the alert combobox.
โค๏ธ
Dear Admin i want help
Hi ๐
I don't really have specific advice for binary trading; I can point you to some helpful videos?
Get instant access: https://luxalgo.com | From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Tr...
May I kindly ask if using heikenashi vs normal candles is preferable for the indicator use?
In this video, I show what Heikin Ashi candles actually are; the perks and drawbacks of them and how you can use them in your trading.
Get Lux Algo premium: https://www.luxalgo.com
how do i set this up for stocks because all the videos seem to be setup for crypto
The info in any crypto video can also be applied to stocks ๐
How can I acces the VIP Strategy Creater?
What is the best strategy? One of the mentioned on youtube? Would love some advice!
It's an Easter egg ๐ฅ
Which ones have you seen? ๐
What do you mean?
Hi there , one fast question on contrarian preset , i see normally buy and sell entries . When i create alerts they do not trigger on '' BUY '' or '' SELL '' as entries but on candlestick '' colour ''
so attaching a photo here , i was Not triggered on '' STRONG BUY '' but where the red arrow is which there is no entry there [ and yes i use after bar closed on every alert ]
it*
Not released
Do you have a screenshot of you setting the alert?
yep , but where was triggered there is no entry meaning '' SELL '' Or '' BUY or Strong etc
Yep
because you have contrarian signals loaded
not confirmation
so it wouldn't show them
I see , so by using contrarian signal , is there a way to be triggered on confirmations .. ?
Yep
that's what you have here
You have contrarians loaded
So on your chart you see contrarian signals
Not confirmation
But you set an alert on confirmation signals
which aren't shown on the chart
Okay so there is no way to be triggered on the already shown signals on chart . Like on the photo on strong signal etc
join yesterday. how do I fix late buy and sell signals?
if i place on the Alert to be triggered for example on '' Any Contrarian Buy '' ? WIl it be triggerred on the Shown on the chart sell and buy ? or will be the same
Hi @shy relic can give us some sneak peek for upcoming S/R update?๐
First of all, great job @indigo cradle on these indicator. I am looking at the free version smart money concepts, wonderful indicator , whoever created is just super smart. My question is I cannot add alter when it enter to that zone, do we have anything in premium to set alert when price enter to that zone, for example I am attaching ES, I see sell and and buy zone, I want an alert as soon as it enter in those red or green zones
Yep use contrarian alerts
No sir BUT it's coming soon ๐๐๐
Not yet
It's worth the wait
Currently isn't clearly possible
We can see what can be done there
That will be great add to that indicator
Not many yet!
Would love your advice. I want to do scalping!
In this video I show some great great methods on how you can use the Nadaraya Watson Envelope in your real time trading.
See NW video here: https://www.youtube.com/watch?v=JpggigF-508
Get Lux Algo Premium: https://www.luxalgo.com
Features used:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#rev...
One of my faves
$nvda has gone from144 to 147 8 yet the whole time it showed it was a short and so i don't understand. i can see plainly that was not rue so can you explain what i am doing wrong then
i have trade view premium too paid annually
I see ๐
Could I see your chart?
i would show you but iut has changed finnaly and i did not take a screen shot before
any video guides for the "best" set up for Lux ?
any help in the right direction would be greatly appreciated ๐
As I was saying that is a perfect hit , amazing indicator kudos to LUX team

!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Premium update is coming ๐
When ?
It's soon-ish
Ok anxiously waiting
My existing tradingview premium membership is over so I bought a new one. I wonder if I have a chance to define my purchased lux algo premium membership to him?
Absolutely ๐
Give support@luxalgo.com an email ๐
They can swap
thank you i am sending it right away
Hi!! Can anyone help with one matter please? I cannot see the Optibot settings.
Ah you have embeds turned off in your discord settings
go to your settings
and enable
Solved! Thank you very much!!
hello i dont have access to the tools in TV
when i put my username in the form how long does it take that i can use it?
Hi @warm sun try refreshing your browser/app, they should appear instantly
Hi! I'm a bit confused on the TP/SL Points range... 1 to 10. IT says in the documentation that the "distance between each point ranges from 1 to 10", what points are we talking here? Bars on the chart? I would expect TP/SL to be derived from critical hi/lo, resistance/support prices....
greetings all, I just bought the lifetime membership but I forgot to use the any20 coupon code, can the admin adjust the different in the bill?
i send the receipt to support email pls kindly help when you can and thank you! very good indicators!
Is it possible to request Altcoins for the Optibot?
Surprise LUNA is on there still...
hi @weary echo welcome!! unfortunately, coupon codes do not work on the lifetime anyway, so we can't add any discount on to it
yes for sure, leave them in #๐feature-requests & we can look into adding!
we'll also likely remove LUNA haha
ok sound good, thanks for the response!
hi, why trategy creator is locked
Hi guys, anyone have a link for Smart Money Concepts? Just the tutorial on that, not a strategy. I just wanna learn all I can about that specific indi
@feral lava hi, Can you guide me to draw support and resistance lines with the help of help LuxAlgo.
Hi, Lux Algo SR & Patterns Premium dont show Order block in my computer, any chance to fix it?
It's an Easter egg for this month ๐ it's not released
Do you have a screenshot? We have a big update for it very very soon
Are you using Lux SR?
hi, here is the screenshot
Ah yes it's a daily high timeframe. This will be allllll updated very very soon
thanks admin, looking forward to have it updated. Now i use free version Smart money concept cos i work in every timeframe
The update is v v v v nice ๐
Yes I am using SR but it has only predictive ranges option no support and resistance lines
There are SR ๐
You can also use the swings
Liquidity sweeps
they are all types of SR
What will come with the lux algo update?
How do I set an alert when there is an intersection between indicator overlays?? @indigo cradle
Lots of good stuff ๐ค๐ค๐ค
We never say before updates
Which overlays
It depends
so when is the update
Can someone help me please i tried to set the alert on Trendlines with Breaks indicator and i can't on my mobile ๐๐
Stuff through November
Trend Tracer intersecting with Trend Catcher is an example
I want to set intersection alert
TrendCater line is red, intersects Trend Tracer line is blue for example @indigo cradle
I always miss all of the signal and very mad at it. Now I want to set up orders automatically based on the signals received. Is that possible? and do you guys have tutorial?
We don't have a specific tutorial however you can find these at 3commas
I'll take a look at it. Thank you
I think buy and sell signals are printed late I got into US30 then after about 25points buy signals printed
Hello, can you please tell me where i can finde a Description about the premium oscillator in advanced Mode?
I think the signals are printed 15mins late if you can get in early this is a big bonus like I got 50 points 20 points before buy signal was printed
Do you have a screenshot?
it's gone now but on the next one i will take by the way i took 50 points US30 thank you
Maybe you can check the price here
Also notifications a bit late on buys and sells
Hello, when I purchased the luxalgo i got purchased two times!!
Why did this happen???
You may have clicked something twice or there may have been a network issue
Give support@luxalgo.com an email
and they can fix immediately
Iโve already sent an email
I think the best way to get the signals guys is have all your charts open on your screens if you can an capture the buy/sell signal printing in real time then check with your rsi trend catcher etc etc
That might be the broker you are using. I compared pepperstone with ouanda, Gold 5 min, and the the signals were different.
Yes thatโs a good point I will try different brokers thank you ๐
Np. Yeah, it was quite a difference.
Hi! Trying to understand the automatic trend lines. What decides if the trend line is linear or has breaks? Because I noticed that it is linear and then in changes to a line with breaks.
Once the advanced buy symbol appears in advanced oscillator, do we have to buy at that point or do we have to wait further to buy?
In premium?
You could indeed enter there yep
Hello, best settings for scalping crypto? where could I find them
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
Yep! On the Lux Algo SR & Patterns.
why does this show to scalp at these prices when its below the sl already and they were adjusted for 40, 40 too
This is awesome!
Is there an alert just to say that the trend catcher has turned green? Is that the same as trend catcher turning up?
Candle hasn't closed in TP2 yet
Yep exactly ๐
Up means green here
speaking of TP and SL settings... I'm a bit confused on how to set them... I've watched the video and looked at the documentation, but the Points doesn't make too much sense to me... is it based on looking back a certain number of bars? Or something else?
The value is more a distance they are from the currently price. I agree it's a little arbitrary right now
So it's translated in the backend to distances
Ok cool. Yeah I'm just using them as VERY broad guides... looking more at the support/resistance zones, the EQ cloud, and I also have pivots and SMAs on my charts
Speaking of which... y'all consider pivots at all in your indicators?
Yep for sure the best approach there
Hey, is there a way to get agility back on the mini dashboard
It wasn't ever really there however things are coming ๐๐๐
November is full of surprises
Ok, ok
DM @noble obsidian
Hi, I just bought the premium package and I was charged twice. How can this be rectified? Thanks.
Hi there
Give support@luxalgo.com an email ๐
They can reverse
Quick help needed I am looking to get an alert when MACD and MAVD Signal cross over
Like these
Use MACD histogram crossing 0
perfect ๐
This is free version Smart Money Concepts indicator, its work very well, I would love to put some alerts when we enter into those zones. I know team working on this, I do not see that great level in SR paid version
Update loading..... ๐
/CL using Divergence , confirmation, contrarian and MACD cross worked fantastic
Maybe if you use stochastic is crossing before MACD
Have you connected your account? ๐
yeah
the lock icons were blue but turned red again
Ignore color
it's a visual bug ๐
You mean to alert on scholastic crossing? They both do same thing correct?
yes
setting of scholastic
Did you refresh your TV press Control then +F5
Sorry. I didnโt understand the meaning of the change on the auto trendsโฆ
what is this blue and red line above and below price bro
They are being updated
๐
Got it! Thank you!! Another thing. Is there any videos on the presets? The docs do not show info about them. I would like to know more about them.
Currently not but which do you want more info on?
The swing one please.
thanks a lot
Swing is confirmation signals with AP ๐
And neo cloud enabled
Hey there I just joined Lux. Am I supposed to have access to the "Strategy Creator" folder? It's locked.
I paid the subscription
And i putted my tradingview username
And still the indicator is not working
Itโs case sensitive
What ?
try refreshing TradingView first
Thanks dear
then they should appear in your indicators โ> invite-only scripts folder ๐
It's working now
Hello there, just joined. Hope ya'll good
Just changed from Peppertsone to Oanda will give this a try thank you
I did the opposite lol. I found panda was late yesterday. Might have to look again ๐
Oanda
But my issue was gold.
Mine was us30
Hi, how are you? Iโm in a lifetime subscriber. Iโm wondering whether thereโs any plans in the future to include multi timeframe in the luxalgo premium indicator? For example, if I have a one minute chart, I can set the indicator to show five minute buy and sell data on the one minute chart.
joined yesterday. best time frame for stocks?
Hello, Iโm new, Iโd like to know if thereโs one of the crypto ALERTs to take live
Could someone help me set up Luxalgo?
Which is better, when I use it with extended hours or regular hours ?
Why is it happening? I mean the catcher is changing with moving the screen? Is it effecting the alert?
Can I transfer my vip to another tradingview account as by mistake I've put the basic tradingview account but I've premium so I want to shift my subscription to premium account
Whatโs name of alert ?I want to see this cross in the chart
What does the height of the clouds represent?
Hello! Just joined where is the VIP premium signals can be found?
Give support@luxalgo.com an email and they can transfer that over ๐
It's just a visual bug ๐
That's the level of insulation's activity there
But big update soon
Looks like an exit signal ๐
Hey do you have options signals or alert?
@indigo cradle Hi friend, can you check chat ?
@indigo cradle do you have options signals or alert?
Not specifically for options sadly
Hi, I think I signed up to LuxAlgo 3 times. Can I DM someone the banking info?
3 times ๐
Give support@luxalgo.com an email
They can check that out
And fix
in lux algo oscillators premium, are divergences shown only for "advanced" oscillator? I tried other oscillators, such as rsi, macd, and no divergences or buy/sell signals are ever displayed
It wouldn't have been our end I promise; it's just a standard checkout. Maybe a button was mid clicked ect but it's all automated and really just could have been a network error
Advanced yep
And those are all real time divergences too ๐
are there plans to show divergences for individual oscillators?
Possibly down the line yep; we just like to have real time divs
Most of the divergence indicators you see online aren't real time
Divergences normally can only be spotted later
Or after the move starts
Advanced osci 100% real time
right, thanks ๐
its cool man, inter webby stuff!
We will fix ๐
Hi team - do you have any recommendation on how to enter at the end of the candle like 1 second before? Is luxalgo has an automatic tool for this? Or it has to be manual?
Enter 1 second before candle closes?
Hello everyone! New to the discord
Welcome ๐
I just paid for my monthly subscription. Receiving an error that there was an issue with my username. Is there step I am missing?
Thank you
hello๏ผHow to conduct strategy backtestingใ@indigo cradle
Not currently possible
Would need to be done manually
What is your Tradingview username?
emm....ok thank you
Not to sound dumb, I don't know if I have one or were to find it? Do I need to purchase a subscription with them as well? Never mind.... I found it.. lol
That's ok ๐
Perfect ๐
Hello again. Quick question, I have TradingView account setup and had already paid my subscription to LuxAlgo. How do I connect them both together. Meaing, when logged into tradingview.com it links my Kucoin account but does not give me an option to select the Deluxe Algo. Any help would be great.
It links your kuCoin?
Do you have a screenshot of what you're seeing?
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Hello, I just made a purchase, how do I set the indicators?
I'm not getting an option when following the Setup Lux Algo on TradingView guide. It just defaults back to home page offering the different subscriptions.
Welcome ๐
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
See indicators at the top?
Click it
Then could I see a screenshot
Voila ๐
what is that?
I would also like to know, which indicator would be more appropriate to know small market swings. I am trading binary options and would like to have a more assertive winrate
Ok ty
When will 4hr be updated on discord?
Hi everyone, I saw that in the LIVE CRYPTO BOT SCANNER section a BTCUSD buy signal with T.F. 2h
How do I set the parameters to have TP and SL if there is no T.F. 2h in the INDICATOR SETTING BOT section?
Thank you
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Does anyone know when this error will go away? This bot was helping me in my trades ๐ญ
we are looking into it ๐
Guys, what does this green price means?
I believe itโs the Trend Catcher.
can you actually buy crypto and stuff with tradingview
probably a really dumb question but im currently just looking at charts and buying with other platforms
Crypto No, stock yes
oh okay
im getting study error on Lux Premium, refreshed a few times, still same thing
On just the SR?
Oh yeah mb, it's just SR
Lux Algo Premium is working fine, Lux Algo SR has an error
SR massive update Monday
alright, so i can't use it now? kinda need it
the swing stuctures are like my break and butter
You should; have you tried removing it and readding?
Yeah I have, i'll try again
all good now, thanks!
error again, i'm guessing no actual fix until monday?
I am extremely new to indicators n stocks in general, anyone tryna give me a walk through?
Like the settings n everything
I set it up I'm jus having a hard time reading what it's tryna tell me
I'm on the mobile version
It may be that asset; which features are you using?
Welcome โบ๏ธ
I would maybe suggest watching
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Thank you
sorry new here. what is optibot?
here are the settings
is there any lux staff with this username?
Thank you guys sm
It kinda confused me, do yk how I can read it or at least change it back??
Scammer I banned
Hmmmm maybe trend lines being enabled
Try disable those
alright
yeah that works, so no trendlines for now? well i don't use them all that much anyway
Nope, got error again
Ok; try hold out 3/4 days
I think that asset is weird
alright, thanks. any suggestions on what i can use instead of SR in the meantime or 3min scalps?
Is the /sentiment command working for anyone?
It's down currently
Have you tried reversal zones?
havent tried it on ltf, ill give it a try
Is there a location to understand what all the abbreviations mean on the SR & Pattern premium.
I know HL = Higher Low, LL = Lower Low, HH = Higher high, LH = Lower High, and BOS = break of structure,
But, what does SCHoCH mean? or CHoCH, or SLL, SLH,
The S means there was a lot of smart money at that pivot ๐
Hello, is there any way to change settings so the script doesn't change the scale? Sometimes, it compresses the bars so badly, need to turn the indicator off
Which features are you using?
Here is the exmple of the indicator on vs off
Pattern detection is on, that is correct
However, turning pattern detection off doesn't change the issue. I've just tried
turn off order blocks?
does that help
(this toolkit on monday is getting MASSIVE update)
Hi, I am new, can someone help me to activate the "invite-only scripts" pls!
try refreshing your tradingview
Nope, it's still the same
Como mudar a cor desse grรกfico? change color?
Patiently waiting for 50% Black Friday discount on lux Algo so that I can get the yearly plan๐
hello admin.. i purchased lux algo premium but the indicator is not showing in trading view( i had given the username)
try refreshing TradingView first - it should appear!
Any chance of 1 hour crypto signals? I see we do 2 and 4. Thanks
Try downloading the tradingview desktop app. I was having problems with the SR algo on tv web. On the app everything works fine.
join vip successful finally...
so many spammer inbox me for "faster cheaply payment" for joining here
recommend turning off dms for this server, sadly unavoidable :/ but you should be more safe here in VIP ๐
we're going to revamp our scanners hopefully soon
anyways, thanks for having me
In the upcoming update, have you added a warning when the price crosses (up or down) the "Liquidity Sweeps" liquidity lines, admin? @indigo cradle
What is the best setting to use in 1 minute?
I watched all the lux algo videos, but the win rate is not so good at 1 minute
guys anyone has video on 3comma how to link this lux algo
15 min. ๐
Please help me on best settings for nifty bank indice with lux algo premium
With 5 min chart
I am trying to setting but i am not finding profitable setting please guide me
๐
Someone help me how can i activate my lux algo premium im done my payment but it doest seem working thanka
Better ๐ค
Have you connected your accounts? ๐
yes
Firstly avoid the 5m; use 15m or above. https://youtu.be/vpSjJpCpwSE
Get instant access: https://luxalgo.com | From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Tr...
Hi Support !! Why sometimes exit don't show up, Can we make it appear alltimes after BUY, SELL signals?
If an exit always appeared itd be 100% win rate as they only appear for winners
So it's sadly not possible
Okay got it, Thanks
LUX Algo's warning tools will create immense power for those who know how to select and combine
For me, the strength of Algo lies in this combination of warnings and I am constantly learning + learning it
I hope the admin produces more videos on how to incorporate warnings on LuxAlgo @indigo cradle
Warnings in what way ๐
is it possible to give the chart the color of the ultimate oszialltor??
*oszillator
Sadly not currently ๐ฆ
would be nice then i dont need to have the oszi open as well.
Hi 15 min or 1 hour indicator (btc eth) best setting ?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
can i use lux algo in binance?
@indigo cradle What is the best way to set alert on the Squeeze Index to not take a trade during the red crosses? PSI / less than / Dots? Or PSI / less than / level 80? I guess either of these would work?
Hi... Is there any video tutorial... on how can we best use the bot scanner?....
Also the bot command...
Not specifically those are more a "hey check out this asset, see what you think and maybe find an entry on a lower timeframe" ๐
Ahh I see...
What does it mean when it says study error on your luxalgo premium?
Is it possible to access Lux Algo signals via pinescript and develop trading strategy?
currently not
Which asset? Try remove and readd
It adjusted by itself a little after sending this thank you
#695668800044925009 are these based on the optimal sensitivity
Default settings ๐ค
How to get โEQ Leadโ values into the alertโฆ?
It should be an available plot no?
It has plot 26.. but i am not getting the valueโฆi am simply getting plot_26 textโฆ
Ahhhhhh
What alert are you trying to set?
I need to set the alert for trend catcher up and eq cloud is positive. Since I canโt set the filtered alert..i want eq cloud value pass to webhook. So that i can skip the trade as needed.
Ahhhh that type of alert would need to be built externally I think
Checking 2 conditions
You'd need to maintain a state outside TradingView
I can do that..but i need the values to spitout from luxalgo script..i see both eqcloud and neo cloud values but not exposed for alert i guessโฆ
I sent a message to support in the affiliate portal, not sure if you folks get those alerts, no rush.....
If you set an alert for EQ lead crossing EQ Lag does it work?
Hmmmm DM your request Micky
ok
Yeah but i want to get notify when trend catcher is up & eq cloud bullish. Thanks for your help..
Yeah just sadly from within TV that's hard. I'd suggest send out an alert when EQ lead crosses EQ lag. Store the state of the cloud somewhere
Then also alert the state of the catcher
Thanks for the good idea..is it possible to expose those eq valuesโฆ? I think they are hidden for the alerts and rest of the values visible like {{plot(โsellโ)}} as in {{plot(โEQ Leadโ)}}
Hello , there is Video for how to use ( wolfe indicator ) ?
What is that
oh its from someone i remember it now lool๐
sorry
if you make like it wil be goooood for us
Hi admin
I want to upgrade my current version to 1 year and hope to apply the discount code policy
Please check my email.
Thanks @indigo cradle
Good afternoon. I just signed up for Lux Algo. But I'm having trouble accessing the indicator through Trading View.
Apologize. It is working now. It took a few minutes.
What's new is coming in November update
Wish we all knew
is that what it is for one year $196
refresh TV first
hi i have a question when support email usually reply? thankyou
i sent support email about 4 hours ago because of multiple payment for one purchase i doubt it happened because i clicked purchase button multiple time
support usually responds within 6-8 hours maximum
Hello, unfortunately I bought 3 account, instead of one. Thinking the transaction didn't work so I repeated 2 more times. Is there any possibility for closing the 2 other accounts and having a refund ?
WOW 3 accounts LOL
Yay ๐
Iโm interested in using LuxAlgo to trade options, is there a video or something explaining the best optimized settings for option puts/calls?
I just bought luxalgo premium, I can see the indicators on my tradingview invite-only scripts, but I can't use them now, how long does it usually take before I can use them?
refresh TV first
email support@luxalgo.com
theyโll fix ๐
I refreshed my tradingview, so its ok for now
Thx
@indigo cradle is possible to set alert when segmented polyreg turn from green to red and vice versa?
hey @feral lava looking to upgrade to life time with the current 60% off offer, is this possible?
discount doesnโt apply to lifetime unfortunately @short haven
weโll have a lifetime deal soon though
@feral lavahi, Lux Algo, Iโm not receive yet your premium indicator on Trading view, please help, my user name on Tradings View is kidzykidswear, please do needful
@feral lava
@feral lava Thanks for your quick support , really impressive
hmmm, I am curious now
Hello i need help with my membership
I screwed up the login somehow, and have discord verified, but i need my other one verified instead. I don't know who i got this one
Any admin or moderator who can help me??
I need Superskunk #1162 verified so i can delete this one. Is that possible please?
THIS below one needs to be delated:
activate Superskunk#1162, and disable Skunk#1019 please
LUX team is there anyway we can automate Lux alerts inti crypto exchange ? Did anyone tried ?
you can request the change to support@luxalgo.com via email & theyโll fix same day!
Thanks you
itโs instant if you entered the right username, just refresh tradingview first
Thanks u, listen but is possible save preset for every pair?
I buy for 1 month to test. and now i love your algo premium, you do a very good job. i want to buy a year membership how can i do ? do i need to cancel the auto buy for months ? and then buy a year ?
Does somebody know how to chain two events/alerts?
Basically i want an alert after the second condition is fulfilled. Any idea?
!upgrade
You can upgrade your subscription by logging in to your customer account at: https://luxalgo.chargebeeportal.com/
Once logged in, click your account, click on your membership, and select 'Edit Subscription'.
From here you can select your upgraded plan of choice (including lifetime) from the blue drop down menu, see the prorated charge, and click 'Update Subscription' to complete the process.
Sadly to do this you'd need to send the alerts off TradingView and process these
How can I unlock Lux Algo Premium??
Did you connect your accounts?
Im having trouble connecting it.
What trouble are you facing?
Connecting luxalgo to trading view