#๐คsupport
1 messages ยท Page 6 of 1
Nice
@paper palm thank you
admins , @indigo cradle - pls can you advise what would be the best setting for the volume ma length ?
admins can you please post the video about not trading buy/sell signals?
hi i need help
would like to watch it
@indigo cradle hi i have added you
Already done ๐
In this video I cover the truth behind trend based buy and sell signals and how you can use them in your trading without following them blindly.
Get instant access to Lux Algo: https://luxalgo.com/
Ok ๐
What should be minimum time frame for entry and exit
It depends on your main tf
If using 1h for example; 5m is nice
Can we get video on bank nifty tooo all learning video are from. International market only but I don't do international market and even opti bot don't have any support for Indian market
It's been a one and half month since i m requesting for bank nifty video
Hi there, is it possible to set an alarm for BOS or SBOS - break of structure? thx
Please let me if is it possible to make video on bank nifty or not. Because I m tired of waiting.@indigo cradle sir
Optibot does support the NIFTY though
NSEI
And all videos made can be applied to nifty too
alguien sabe como poner alarmas con los indicadores por favor
Hi. need help here. My Lux Algo Premium suddenly shows red padlock. But not on the Premium Oscillators and SR & Patterns.
Used to be green on all three of them
How to update my indicators ?
!update
To update Lux Algo Premium indicators, refresh your browser/app, remove the indicator from your chart, and then add it back to your chart + save your chart layout on TradingView.
Full guide: https://docs.luxalgo.com/lux-algo-premium-indicators/how-to-update
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Hi @lavish kettle,
Please email support@luxalgo.com for any order enquiries and they will assist on the same day.
hola, alguien de soporte habla espaรฑol?
I would like to have an TradingView alert, when trend tracer and Trend Catcher are baerish. I use the settings in the attachment , but it does not work. Please help.
Trend catcher give 14 candles later alarm!! (7,5h in 45min chart) why?????? look pictures
what is equilibrium zone @indigo cradle
@indigo cradle - Are you planning to enable backtesting in next release in Nov?
Hey I just resumed my subscription but it doesn't show on tradingview
nvm it just came back
It wasn't set on another timeframe?
I don't think so, the diagram is 45 minutes, and the alarm at 45, see image
For the life of me; I'm not sure why that happens. We will take a look. It seems to work for a lot of people but for some it's funky.
You've clearly done it all correct
maybe it's the "calculated by tradingview"
try using binance?
normally it delays exactly 3 candles from the moment it will change color, is this correct? with option such as image]
Hi @mossy gull! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
I mean; it really should not be 3 candles. You have screenshots of the 3 candles?
Hello there. I want to scan all the shares in the Turkish stock market in the system I use, how can I do it?
Sadly you cannot; you'd need to set alerts one by one
There are 480 pieces
Generally traders stick to a handful of stocks
so it's easier to manage
hi, what is equilibrium zone @indigo cradle
Nice
It would be a middle area where the market is balanced
what is the meaning of autopilot
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
this page explains ๐
Thanks
@indigo cradle someone ask me to pay the fee in crypto to have premium indicators access
Hi Guys, in the process of setting a bot with trading view & 3commas but uncertain of the alert trigger name with the signal , which type of buy and sell name do I use ?
Would the buy and sell signal be a confirmation buy and confirmation sell?
Hi,
I used to have the same issue and occasionally Iโll get strong buy when it was clearly a strong sell(go figure), I had attached snapshots and stuff, however I havenโt had problems once I started setting it up for โonce Per Barโ instead of close this way it fires as soon as the criteria is met instead of waiting for the candle@close
hello, I'm glad I've been using the indicator for 1 day and it's fabulous, what videos do you recommend to familiarize myself with everything and master all the options to the maximum? because on youtube I saw that there are several, should I see them all in order?
Appreciated Tradebee, https://www.youtube.com/watch?v=nLsNdIdKKJE&t=3s
Get instant access to use Lux Algo on any chart: https://luxalgo.com
In this video we cover the best ways to setup TradingView alerts with Lux Algo Premium, including the standard method, Any Alert Function Call, as well as the new v5.1 'Filtered Alert Creator' system. All of these methods also work exactly the same on the TradingView mobile ap...
they recommend per bar close but you say there are error with it?
Yes, it has been a big issue for me, I trade at 1m TF, and couldnโt afford to miss stuff, now itโs much better
that is one tight time frame.... 1m wow... hyper scalper
Hi guys whoโs got a consistent system with lux algo products that works best for them? Any help is appreciated:) glad to be here
trying to setup alerts as per the tutorial, however I don't get an option to add an alert from the "Any Alert" function - I have tried removing and re-adding the indicator
am I missing something?
Any condition sell. But the alert is triggert much too late. I actually do not need the buy and sell signal. Just an alert, when Trend tracer and trend catcher are down.
Honestly you should be prepared to buy or sell before you get the indicator. I just use the indicator to help me feel better about my decision
Hi ..cannot log in to my lux algo account ..I would like to terminate my subscription and I dont want lux algo to deduct my card.What should I do?
Hello. Can you let me know if Lux Algo Premium repaints. Thanks
No repaint ๐
In the top box you've selected Lux?
We are working on this as an alert ๐
rookie here: is there a possible way to see 2 following sell signals?
instead of buy->sell->buy
Not unless using contrarian signals ๐
is it possible to you use Lux Algo in a trading strategy, the script is invite only. I love this indicator
Currently it's not that simple - currently ๐
Ok, but it can be done, its up to me figurer it out or can you give me some guidance. Many thanks
It depends exactly what you want to do there for example
Hi, I want to build a code that will automatedly trigger a buy or sell on Tradingveiw using Lux Algo premium.
Currently not possible sadly
Ok, thanks
Iโm currently using IBKR and the fees are super high for scalp trading and was wondering if anyone had any suggestions for some low fee brokers
I'm IBKR also. i changed the plan i was on and halved the cost of my fees . . . . i got talking to the right person who was very helpful.
TV wont let me add lux algo or lux also SR back to my chart after deleting them to redraw my fibs, any suggestions? just get a message "oops something went wrong" I can add premium oscillators back no problem
They both have a red lock next to them
@worldly cliff @indigo cradle
yes several times, the locks changed to green, I was able to add lux back, but still no SR and patterns
yes, everything else I have been able to add back
ok, i will try again in a bit, ill close it down for the time being (on desktop) if that matters, an all other indicators I was able to add no problem that aren't lux
well that makes me feel better
Thanks for that
I sent you a message directly
@indigo cradle are the channel alerts based on optibot settings?
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Hi
Hi ๐
What are the blue and red crosses please?
those are exit signals ๐
Ok thank you
Hi. is this something i need to be aware of if I'm using Lux Algo Premium.
Not really unless using scanners ๐
Hi may be a bit of silly question but Iโm new to trading when I look at my 5 minute time frame for example take profit is a higher number but when I look at the 15/30 minute time frame itโs the reverse this on scalper mode
How do I use it correctly to be accurate
Do you have screenshots here?
This is because if the asset is in a downtrend it will show the TP as below the price
As it's a short
I also looked I auto pilot frequency on short trend
When I put it in long term they seem to match
@indigo cradle @feral lava - Can one of you please advise?
We never ever disclose future updates
But all I can say is November and late October
Will be of great interest
Yes but in the higher time frame the same asset on 15 Minute flips to above ? Could that be because I had it on short term trend ?
Yep exactly it's a different timeframe
why #695668827937177660 he writes that dogecoin has a buy page and and there is no
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
I have everything the same and still ...
May I see your settings?
Hey, I don't know why I don't get alerts late? Can someone help
What do you mean? ๐
I changed to 12 and still nothing
scroll to bottom of settings
lets see
i have a feeling it doesnt look like 26 agility
no it's 22
SR premium is like, Smart Money Concept Premium indicator right sir? more improved than the one on public.
Well; it's got pattern detection, predictive features and the SMC is about to be totally overhauled
Top to bottom with unseen
๐ฅ
Hello, THERE IS A WAY TO backtest strategie? eg. rsi<30 and trandcatcher from red to green
That's Great! I'll be looking forward on that SMC overhauling 
Only manually for now sadly.
It's a nice idea for a strategy though
And how do I do it manually?
How to backtest manually?
yes
You'd basically just look at what would have happened if you took the trades
You go back in the chart history
And see
I also didn't see an answer
#๐คsupport message
- Are you planning to enable backtesting in next release in Nov?
@indigo cradle quick question โฆ can we use SPX sensitivity on /ES charts (OptiBot 5 Min) ?
There is no answer because we don't tell or indicate our releases
All I'll say is November is a big big month
It should be ok yep
ok, Are you planning to enable backtesting sometime?
It's just not something I can comment on. It's all secret.
All I'll say on the matter is: requested features always almost get added
How do i get alerts for turing red/blue?
Dear admin can I know if I am using lux correctly I took short position just now
Really how to fix it ? Yes this is mobile
Ok sure I will
@indigo cradle Is it possible ? ^^
@indigo cradle @feral lava where do i get the breakout zone
Do the buy signals repaint? Is heikin ashi vs candles preferred with the algo4
Hi is it possible to set an alert for the Neo cloud
@trim cape Yes, check this vid: https://www.youtube.com/watch?v=nLsNdIdKKJE&ab_channel=LuxAlgo
Get instant access to use Lux Algo on any chart: https://luxalgo.com
In this video we cover the best ways to setup TradingView alerts with Lux Algo Premium, including the standard method, Any Alert Function Call, as well as the new v5.1 'Filtered Alert Creator' system. All of these methods also work exactly the same on the TradingView mobile ap...
Thanks yes Iโve watched that video but it does not allow without a confirmation buy. I was wondering if it could be alerted even if there is not any confirmation buy. The filter confirmation need to be set with some sort of confirmation and the preset below
So to simplify, I want to get an alert for the neo cloud no matter what the condition, Is this possible
I am also looking forward to this feature with trend tracer and catcher up, without confirmation buy.
Hopefully they can consider this in the next upgrade with filters no confirmation
It is grayed out and wont let me select it.
If I have another indicator ie Volume I can choose between the indicators. Lux doesnt appears as an option
No repaint
In this video, I show what Heikin Ashi candles actually are; the perks and drawbacks of them and how you can use them in your trading.
Get Lux Algo premium: https://www.luxalgo.com
You want an alert when it changed color?
Have you refreshed page?
Correct
I had yeah.
Reboot worked
Pls can someone give me a video on how i can trade Binary options with lux Algo?
hey i just bought the lux algo and i cant get it on trading view
Have you connected your Accounts?
Hey guys! Could you help me out ? Is it possible to get alerted when the macd changed color ?
i got it working
Hello
Whats the best settings for the Fibonacci Toolkit?
Also why is this locked? it says to contact the owner
Have you connected your accounts?
Yes
Try refreshing page ๐
Hi, can someone elaborate a bit more on what is shown in the right side of the lux profile ?
It's basically a volatility profile so it shows how volatile that area was
What do you define as volatility ? the lines are pointing a specific price so there is technically no volatility on price.
or am I reading it incorrectly
Basically areas where candles were big and violent
Sorry if I am sounding dense ๐ if you see below, the purple line that I have a mouse over on is the widest. But it is corresponding to a tick and not a candle so how is it corelating with volatility ? A tick is a tick ๐ it cannot be volatile.
I'll ask Grover to give a more detailed insight on how it's calculated. I don't believe it uses tick data
Yeah documentation does not cover the tick vs candle understanding. Just trying to understand a bit more to use it effectively.
Thank you
@indigo cradle How we doing guys>
Great products! Absolutely blown away
Question for you.. Do you have sensitivity settings for all TF's on SPY and QQQ?
Much appreciated ๐ Not currently in Optibot but on your dashboard you can find that
Also, Do you have any indicators that offer the heads when institutions drop in?
OK great. I will go and take a look. Appreciate it.
Am I right in thinking the Dashboard is the little widget on the bottom right of the chart? Autopilot, Trend Strength etc etc.
On the advanced oscillator we have the orange bars
Those indicate potential institutional activity
spot on! Wow! exceeding expectations! Really is a great bunch of tools
Appreciate it good sir ๐
We have full docs and videos too
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
you're a legend, many thanks
Sorry, one more question. The Short/Mid/Long term settings. Would I be correct in thinking that Sort Term is ideal for Scalps?, Mid is ideal for Swings?
Hello everyone, newbie here
Yep absolutely spot on
Welcome ๐
I have a qn on the setting. How do i get the buy sell label to show up on my chart? I just added the indicator and use the scalper mode
Scalper mode changes the labels to arrows instead
oic...then which mode should i use in order to see the buy/sell label?
ic...gotcha...tq
one more qn... what does the x means after the label appears? Is that an exit label?
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
These will help too
thanks!
Where about on the candle would the buy alert occur?
Any location
Confirmed on close however
I am playing around with the pivot oscillator, read the documents, is there any video on it to explain its use cases ? The thick /connected line is I guess 10 bars old and the dotted lines are what is expected in terms of move, but even those are not for future like we have in the SR forecast.
Excellent.
In other words, a 5 min bot should run on regular candles? @indigo cradle
So the main application is the forecast there predicting pivot locations
It depends too much
It's so hard to say
It depends on your setup
Thanks
This is BTCBUSD chart, the dotted lines are corresponding to the candles already painted. How to use this information as a trader to understand what is to come ?
See it's turning red
And is near 100
It's suggesting this area is a pivot
And price will change direction
Possibly ๐๐
Can anyone tell me what the purple candles mean? I canโt seem to find it on the videos.
@indigo cradle @jaunty perch How are the dynamic oversold/overbought levels displayed? I have them enabled in MACD settings as shown above but dont see the oversold/overbought levels. (2). Does the Ultimate MACD display the divergences between the price and the oscillator? If so how do I enable that? Thanks!
Ranging market or unconfirmed trend
That's for the stochastic
Not MACD ๐
ah thanks!
i know you guys are not financial advisers and i will taker your advice with a pinch of salt but whats your view on this stratergy
I use the optibot
If socastic is green
And MacD
And trand catcher
I enter
best to back-test for yourself, then if profitable paper or demo trade, and then finally real money
my luxalgo prm when I change the autopilot enabled, I uncheck the box it isnt changing? yes I refreshed my chart, I removed luxalgo, still says enabled
You're probably using a preset?
ok thanks
Can you set up lux algo differently on each forex pair? Or will it just be one setting out on all pairs?
You need to go pair by pair for that
How do I do that? I have set up my settings on XAUUSD but I want them different on EURUSD Becuase they arenโt as accurate on this pair
How to save settings for a trading pair on TradingView:
Interesting, do you know how itโs calculated ? Is it because weโre trading sideways?
It is absolutely
Hi Guys, not sure how to connect to 3commas with an Alert with LuxAlgo, LuxAlgo alert does not provide a message field in the Alert
The Smart Money indicator is amazing. Maybe I missed it...Is there a way to combine it with a Volume Profile? I think this would make an overpowered indicator!
Lux Algo SR has a Lux profile in it ๐
On Smart Money Concepts - Is there a way to brighten up the words - BOS, CHoCH, etc.? Same with Swing Structures - SHL, HL, LL, etc., words need to be brightened up or bolded.
Premium is getting a big update; all suggestions are noted
Are you using any alert()?
Hi @hoary harness! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
Damn, I feel like an idiot.... Yip, change it to Confirmation Buy/Sell and my world opened up (the message box appeared) .... Appreciated Admin........ ๐
Have you connected your accounts?
yes
How long ago?
they are here, but when I press them they don't work
Refresh and it'll work
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
thank you, sir
With the optibot how long should I be holding for
Holding signals? Or settings
@feral lava @indigo cradle @shy relic ,
Guys, I know its on the list of todo, based on our earlier convos, but please add "stock news" under Market Updates as soon as possible, it would be helpful to just make lux a one stop shop for all our needs.
Absolutely it's on the list. We are just working on some overhauls and big things for the next month. Once checked off; this will be attacked
Hy guys I am new in this discord but I need some help for LuxAlgo indicator .... I am trading crypto mostly BTC and ETH and I would like to know how can I test a strategy in tradingview ? Can I ask anything here or somebody can help me in private?
Currently there's no way except manually backtesting
Currently not
@indigo cradle Is there any perk between VIP and Lifetime?
I have a Lifetime subscription, but my discord is still under VIP group.
Thank you! Just making sure. Sub since 2021.
And is there any way to add take profit levels so if I get a sell or buy signal after give a signal where should I take profit ?
We have the x as exits
And you can exit based on other factors too
Reversal zones
Oscillators
SR ect
and is there any method to automate these settings because I want to make a 3commas bot?
Yep via webhooks to 3commas
hello, first of all, I would like to say that my English is not very good. Before I bought the algo premium, I saw your nadarya watson indicator and I liked it very much. Is there a version of this indicator that can be set up with a buy and sell alarm?
Not in premium however real time signals like contrarian are a nice alternative
thenk you I would like to ask one more question, is there a setting you suggest I do to use it connected to the buy and sell bot?
Hey guys! Iโm just curious, has the team ever considered creating an exhaustion/absorption indicator?
what if I dont get x as exits?
Hi
I m new here
I have subscribed for vip
How to use vip indicators?
Any videos?
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Hi
What it means
Market is on HL so on candle unitl unless closed above liquidity green zone one can stay the entry or shall wait as in renko order block is also form
Can't decide it or trallling with stop loss
At gecko sir please suggest
Hey Guys, would my settings be correct for my alert only to executed once when the tracer trend changes direction or will it be fired on each bar close ? I am wanting for the alert only to be executed when the tracer trend changes direction only
Anyone in here know the equivalent of 20 pips on US30 ?
Does anyone know what does Strong mean?
im not sure what i did but my candles look like this on many time frames
PUT YOUR CURSOR IN THE FAR RIGHT CLICK AND PULL OR PUSH UP
thank you
THAT WILL RESIZE THE CHART
I only see stock pattern detections? is there ever Forex pattern detections? Setting I need to adjust?
@indigo cradle good day! just a suggestion, can you please add this feature Invalid OB mitigation feature on current SMC indicator. same goeas also with FVG/Imbalance mitigation. cause i keep seeing the OB even though it is already invalid.
Hello i am unable to run the LunchBox BOT
It brings back zeros for results
I am on a 2 week trial and its not working
Can someone please help me out
Hi, I have purchased the lifetime subscription after testing the 3-month version.
Now that 3 months have finished, the lifetime did not kicked in automatically. In my LuxAlgo subscription, I am seeing 2 "accounts". One registered earlier with 3 months (now expired/cancelled for autorenewal) and another purchased recently (lifetime).
I don't have access to the indicator anymore. How do I get the indicator access back?
Hello, Admin. Optimal Sensitivity, how often is it updated based on UTC? Every Tuesday at 9 a.m.? Every Thursday at 9 a.m.?
Give support@luxalgo.com an email they can fix immediately
This is every candle it's recalculated
Hello, I am new and just trying to figure out where to begin. Ive been watching the short video that talks about the different strategies, but not sure where to begin. I like to scalp and notice that there is a preset, but I cant find anything that teaches the pre-set scalping strategy. Can someone point me in the right direction? Thanks!
Try this:
In this video I show some great great methods on how you can use the Nadaraya Watson Envelope in your real time trading.
See NW video here: https://www.youtube.com/watch?v=JpggigF-508
Get Lux Algo Premium: https://www.luxalgo.com
Features used:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#rev...
One of my absolute faves
/sentiment symbol:btcusdt timeframe:1h
I replace xrp with btc and changed time frame to 15m
@indigo cradle
Seems to work for me
That's the point not responding to my commands lol
Issued multiple commands thanks anyway btw awesome work you guys have done
You are very welcome.
It should just appear if you type /
Yes I copied commands earlier used successfully but no response that's why I asked here
Is there any way that you can just create 1 bot for strong sell and strong buy time frame can be 1D or 4H
Like a scanner for specific TFs?
Let me check now
Yea for day trading, scalping or swing trading
We can explore filtering; it's super tricky to do. Tradingview doesn't make it easy for us ๐
Message me if it can increase my winning chances I am willing to pay extra for this bot subscription
Do not worry: November has some large things coming for you
Thanks a lot.
Going for lifetime membership without having a trial was my best decision.
Best money I spent
Thanks a lot for the time and efforts you put
A pleasure and believe me it's only getting better ๐ค
Not sure if it has been mentioned or posted before but I was under the impression that the premium and sr dashboards would be "tied together" if placed in the same location. But maybe that was not the case?
So the pattern detection in older versions was in the main and not in SR
So it was in main dash
Now it has its down
Which you can move
yes, but I thought that if I for instance set bottom right on both then they would be visible at the same time but the premium dashboard overlaps the SR one so it is not displayed
but maybe is misunderstood the setup...so now I have one at the top right and the other one bottom right
Other than QQQ method what are some other good mechanical strategies people use with lux
Do you have a screenshot?
so when first added it is on top of Volume Sentiment and clicking anywhere it will move behind
So by design then as Microsoft would say ๐
"It's a feature"
๐คฃ
Jokes aside; it's hard
Because indicators can't really interact
No worries, at least now I know it is not a bug ๐
The emoji however...
Is meant to be an explosive
However the explosive seems to have....
Detonated
Hello, forgive me if this is an obvious solution. I see on the bot scanner alt coins there has been an alert for a sell signal on LTC 4 hour.. However when I load my chart up checking both the optimal sensitivity and the optibot 4 hour settings I dont see the signal. I have it set to Neo Cloud preset and the price is below the red zone so it should be showing?? thanks in advance
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
ok thanks very much. I will try the default lux algo settings of 12, 26 to see
yes its there now. thanks
how to change the agility and Sensitivity
That's in the settings
Double click on any signal
can show me or you have video
its simple, go to the settings button on your trader view of your lux algo premium list, in there look for where it says signals sensitivity and adjust it accordingly... scroll down to the advanced settings and you will see where it says confirmation signals agility.. and adjust that accordingly also
@indigo cradle I can't find the new indicators channel here
I mean the free indicators chanel
How do I find the new indicators channel here on discord
Hi I am getting this error:
Hello, if I activate autopilot signal settings, will it be configured according to the lower right box or do I have to manually set the optical sensitivity that appears in the lower right box?
Is this fixed?
Nope; once set you leave it all alone. Sensitivity is managed for you
Yes, thank you.
Hi , The lock near the lux algo is red , is it wrong ?
Have you connected your accounts?
Yes
and it is working just the lock is red color
the other 2 indicators with green color
Is it possible that they can add an option to automatically change the sensitivity according to what the lower right box dictates?
It's a bit of a tricky logic thing; as it updates v v frequent
[LUX] - Admin (Gecko) [LUX] - So sometimes I'll get a Trend Catcher signal to buy or sell and at about the same time, I'll get the same buy or sell signal from a second Indicator such as EQ Cloud and I'll enter the trade but then the trend goes not far enough to cover trades commissions. How can I help myself increase confidence in what the strength of the trend will be to help ensure a profitable trade?
when draw lux algo premium life time?
@indigo cradle hi I am dm u .plz chk
@indigo cradle is this indicator we can use in our Indian Market?
Yes Neeraj.. It seems we can using
Today I used in NG & BNF it worked like wonder..
In NG it was just too awesome, eventually in 1st day itself the quarterly subscription fees is recovered.. Let's hope to cont. the same..
@indigo cradle So sometimes I'll get a Trend Catcher signal to buy or sell and at about the same time, I'll get the same buy or sell signal from a second Indicator such as EQ Cloud and I'll enter the trade but then the trend goes not far enough to cover trades commissions. How can I help myself increase confidence in what the strength of the trend will be to help ensure a profitable trade?
@indigo cradle : If we have "STRONG" Sell Signal {A RED CANDLE} then followed by immediate reversal in form of PURPLE Candle which is actually a GREEN CANDLE without Premium Indicator around 4 or 5 in 15 mins TF, what does this resemble, do we have to wait for SL1 or we get out of trade immediately.
Hello, I was just watching a video and I saw that the dashboard showed TF to the left and they were red or green to show bear or bull. I cant find where to turn that on?
Hi @toxic fossil,
Please email support@luxalgo.com for any order enquiries and they will assist on the same day.
Hello, is there preferred setup for liquidity sweeps in Lux Algo SR (default is 3)?
Hi I changed trading view accounts can you allow permission for it, username is J0shLzr11
Yep @untold zephyr see here for instructions: https://docs.luxalgo.com/faq#can-i-switch-access-to-a-different-tradingview-account
Get answers to frequently asked questions including how to get access, product questions, and everything you need to know regarding payments.
@feral lava - So sometimes I'll get a Trend Catcher signal to buy or sell and at about the same time, I'll get the same buy or sell signal from a second Indicator such as EQ Cloud and I'll enter the trade but then the trend goes not far enough to cover trades commissions. How can I help myself increase confidence in what the strength of the trend will be to help ensure a profitable trade?
I sent an email how long should I expect to get permissions
3-4 hrs! ๐
From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Trend Catcher. These can be enabled from wit...
i recommend watching this as an example for using other features in confluence with each other @craggy goblet
Hey got question,
I set an alarm to the confirmation signal, and I changed the setting like the optibot, but the alarm is still set the the previous setting before the change.
How can I change the alarm so that I wouldn't have to delete and re open the alarm again?
Can you please explain the difference between the order blocks in Lux SR & Patterns /Smart Money Concepts which are colored grayish vs the Smart Money Concept new indicator which comes out blue and red. Also, the block are a great deal longer on the indicator vs in the patterns & premium (2.0). This is confusing on which one to use
I agree, it would be good to take the SMC from the free service and put it improved in the premium option, also in the free version it is better understood than in the premium version, on the other hand it would be good to make another SMC video for premium
It's exactly what's about to happen ๐ค
SMC in premium overhaul
Great, thank you
So we should wait to use SMC?
How do you find only responses to your questions without scrolling through everything?
Which asset classes are on the patterns?
Is it better this indicator with heikin ashi candle?
Do the presets in Lux Algo premium 5.2 have auto pilot enabled by default ? Is auto pilot better than the recommended signal sentivity & agility by optibot ?
Got it, in the presets where auto pilot is enabled, what is the recommendation to leave it in auto pilot or change it to optibot settings ?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
itโs a personal preference always
#๐ง core-lessons last post explains good too ๐
Thank you!, is there a way to force a preset that is configured to use autopilot to use manually entered settings ? Here although I have disabled autopilot to enter optibot settings, it seems to be still optimizing around autopilot. Atleast thats what the dashboard says.
@feral lava
unfortunately not with presets
with filters specifically you can still adjust settings
but youโd have to manually setup the indicator to customize it further w/ a preset
Hi there, how to solve the error ! i see in my tv? Seems like the indicator is not switch on
@feral lava : If we have "STRONG" Sell Signal {A RED CANDLE} then followed by immediate reversal in form of PURPLE Candle which is actually a GREEN CANDLE without Premium Indicator around 4 or 5 in 15 mins TF, what does this resemble, do we have to wait for SL1 or we get out of trade immediately.
?
Is this fixed?
If it didn't already hit your SL you'd probably want to exit
I DMd
I replied to you in DM
it's an order help
Just keeps your person information safe
Ok. Tnx
I received an email say that you changed accounts however I logged on my new account and it the indicators are still blocked, I have reloaded
How long ago did you get that email?
1 Hour ago
What's your new username
Ah
I added an extra 2 on the end
That'll be why yep
Do I need to resend the email
Sadly yep
thanks for previous help. i still cannot get premium lux on my charts. i tried evereything guide says and still locked, i got email saying account was unlocked. thanks
username woodie
yes
Do you have a screenshot of your profile
where do i find that? i had support cancel 1 account and i open a new one yest
Go to TradingView
In the top left corner you'll see your account profile
Click it
kentrades56283
Online Joined a year ago
ah ok
Give support@luxalgo.com an email and they can swap
just sent to support new username...thanks again , not as fast as i use to be
No worries at all ๐ค
๐
Hi
Can I make self scanner in (forex, commodities..) based on LUX indicators?
You can export the data as CSV in tradingview and if you are good in excel or SQL coding you can backtest a strategy
automated rather than manual
It takes time but will help in the long run
Hey Lux, what asset classes are for the patterns.
The patterns on TradingView?
Pattern Detection on Discord
Just daily stocks there
However of course you can detect whatever you want on TradingView
Hello, I am using the trend catcher indicator by connecting it to the robot, but after the indicator turns to the other signal color, it gives an alarm two bars, is there a solution for this? or do you have an indicator that you recommend to connect it to the robot and use it?
Do you have a screenshot of the late alert
There is no screenshot, but XRP turned red at 03.45 on the 15-minute chart, and the alarm was activated at 4.15.
If it activates on time, the indicator is exactly what I want, but I can't earn money in this way.
Could you draw on your chart where it triggered?
I found the alarm log
Keep in mind; it draws itself from the previous bar
So technically it turns green a bar later
So how should I go about using this or any other indicator on the robot? that way it doesn't quite meet my requirements
or is it possible to adjust the settings of this indicator and make it signal earlier?
You cannot adjust
What exactly are your requirements?
There may be an other indicator that fits them better
We have a few options
You could set this alert as once per bar
So it alerts earlier
I'm using that setting right now.
I need an indicator that I can connect to the robot and use it in futures trading with buy and sell signals.
I have a daily average earnings target of 10%-25% at the end of a month (20x-30x in futures)
๐
A daily Average of 25% ๐
If you daily average even 1% you're going to be a king
This isn't really a realistic goal for any trader
If you can increase your account size 10% a month that's amazing
In a year that basically tripled your money
Especially with a robot
You're wanting something that prints money
No, you misunderstood me ๐ I didn't even earn an average of 25% per day. I expect 10%-25% daily gain with 20x-30x leverage
Ahhhhhh
Ahhhhh
Ok ok
And you want to automate this?
I would suggest you take a look at contrarian signals
my english is not very good sorry can you explain this to me a little bit
To explain exactly, I have a daily profit expectation of 0.3%-0.8%.
Yep ok ok ๐
So for automation; some contrarian action is probably the way to go
Is it possible to do this on luxalgo? if possible how can i do it?
Actually, I know that even 0.8% per day is a bit high, but I set a goal for myself and if I can achieve this goal, I will establish a logistics company for myself in a month and a half.
Contrarian signals?
Those are in signal mode ๐
Guys can somebody link me a video about how to setup 3commas with luxalgo?
I dont trade on the weekends. I use the optibot and on monday's in the morning should i change the optimal sensitivity or should i wait until the new ones get sent?
So Monday morning if I change the optimal sensitivity it'll be Sundays and at 2pm the new ones get sent so I change them then
Or should I just wait until 2pm to start trading for the week
I'd suggest waiting there absolutely
What is equilibrium with the smart money concepts indicator and how do you use it?
What levarege do you use guys for crypto and how can you find out the SL level?
@indigo cradle Hi, Gecko, is it possible to create an alert when neo cloud changes it color, regardless of buy/sell signal. I find it very interesting that just based on neo cloud, you may ride long trends with little losses (ranging market).
You can for a crossover of the cloud
But a color change isn't really a condition
But when it crosses over that's the same thing basically
NEO lead crossing NEO lag
Hey Admins, Any chance we could get a forum chat channel for users? Separate to this chat with no input from admins
to discuss strategy's etc
It's coming eta 28 days
I'll be counting the days. Thank you. 
Does a weak high or low on the smart money concepts mean that that level has a high chance of being broken?
New user. I have a notification sound from somewhere. How do I find source and turn it off? Beeping sound that occurs without me doing anything.
Hi all, first time here how can I get access to luxalgo scrip?
Hello, ADMIN. I have a question about "Any alert() function call".
- If I set it up like A, do all four signals work at once?
- Currently, 1, 2, 3, and 4 are entered separately in the message window. If I check 4 of "Any alert() function call", should I type "m1, m2, m3, m4" using a comma between messages?
Beeping when you get an alert?
- Yep all would work
- when using any alert sadly the message field isn't available. These appear to be seperate alerts?
Hi what does Shh stand for ?
I see okey but right next to it says weak High ? So does it mean in this current market itโs weak?
Not really; it's not that it's weak. It's just the SHH has more activity from big money
So the logic here is that its a more significant level
If price breaks above that it's a big deal
I see okey thanks
The two prices in the middle red and grey what are they for ?
They are most likely one of the plot values; I'm not 100% which ones there
Not sure if the whole picture helps more. What is a plot of value
You can hide those by right clicking the side bar
They aren't really relevant
Okey thanks
Thank you so much.
If I enter script, "m1 or m2" in Message field with "Any Confirmation Strong" selected, will there be only one(BUY or SELL) valid signal?
I hope that even if two messages occur at the same time for one signal, only one signal that is valid will be ordered to the exchange.
Hi support - I signed up for the 30day free trial and was immediately charged on day 1?
He guys! New member here. Question; for the sensitivity levels for NDX, should we use the same sensitivity levels on QQQ?
usally the optibot is less sensitive than the dashboard sensitivity?
On the Smart Money Concepts indicator, I see the option for an alert if price breaks an order block. I'm more interested in when price enters an order block. I'm probably missing something obvious?
Hello Support, I would like to change my trading view account, how can I do that?
Give support@luxalgo.com an email and they can swap
What does it mean when a small box pops up on my chart?
It is grey. It pops up then disapears from time to time.
Hello What date is the SMC update scheduled for premium?
It's being worked on ๐ค
alert shows strong buy on 2hr chart for eur/gbp, but doesnt show on my chart???? why?//
You may have changed your signal settings after you set that alert?
Hi @hard flame,
Please email support@luxalgo.com for any order enquiries and they will assist on the same day.
the forex bot scanner says strong buy,
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
Hi @jaunty perch! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
@indigo cradle I just want to inform you that most of the FVG/Imbalance in the chart using SMC indicator are not showing. some of them after mitigation, they are not disappearing.
that candle close might have not been precisely under it
some of them don't show due to "Auto-threshold" being enabled
Ok... i see problems for new guys.... lux algo have many information. Many settings, many posabilitys for help in trading. And many dont know too use them even with watching those short vids... how about making learning vid. A big tutorial, with explanations like for 7 year olds. After everyone can find him self in one of settings. With chart setings, going back in TV in time, finding trades, explaining reaction of lux algo setups.
Its a bunch of work, but need too be done 1 time
got a lot of super easy long form videos coming very soon! https://www.youtube.com/watch?v=vpSjJpCpwSE
going full youtuber mode w/ basic tutorials for everyone, there will be many a week starting shortly
appreciate the feedback ๐
From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Trend Catcher. These can be enabled from wit...
I understand what he says lol, watchd everything. and for me its maybe enough. But many have no clue why what where... but your welcome ๐ and its good too hear you already working on it. I didnt know that lol
I was just able to use the indicators now I canโt, any reason why?
They suddenly stopped working?
Yeah, I can show my Receiptfrom where I just bought premium, but I was able to add whatever premium indicator I wanted to and now itโs showing locked receipt
You just signed up?
Yes.
And you've connected your account?
Yup! Like I said worked and then stopped, Iโm not sure if I did something wrong?
Iโve purchased prior before, does that have anything to do with it
For trading view its jackeronie8587
Hey guys just a quick question, how do I access breakout zones on the lux algo sr & patterns premium ? ( Iโm new )
Welcome ๐ช Those are now in Lux SR and Patterns
And named liquidity zones ๐ช
@indigo cradle ecko, I just found your channel on youtube, I didn't know you have a channel with tips on how to use Lux in a better way, I'll see your videos right away, thank you very much
*Gecko
A pleasure ๐ฅ
Enjoy
@indigo cradle hi
๐
I just paid for the subscription. But i want to cancel now do i get the refund for that @indigo cradle
๐ณ
Wait
You just purchased and you instant want to refund?
Or you just want to cancel the subscription, keep using it for a month and are just confirming it won't refund?
@indigo cradle yeah i just paid for it now. But i think i want to cancel cause i pay for the quarterly ๐ฆ
do i get the refund for that
can someone help get a good setup ?
Hi @night beacon , is there any chance to display the number of the Buystops/Sellstops on the liquidity level in future releases?
hello i am new quick question is there a way to set 1 notification for multiple currency pairs or do i have to create a notification for each pair separate thanks
Hello ADMIN. I want to put a buy or sell order when the Confirmation Minimum signal is generated. How do I set up the alert?
Some order blocks are thin and some are thicker. What does that mean?
Hi @indigo cradle I realise that my indicator overlay for (Lux Profile) is not there when i add lux algo premium, how do i enable it? Do advise, thank you.
The moment i took that screenshot auto-threshold was not ticked because i know that if click that thing fewer FVG/Imbalance will be displayed. I tried clicking and unclicking the auto threshold. still the same result. those important missing FVG are still not showing sir. what do you mean by candle close have not been precisely under it sir? as far as I've known under ICT, Phantom SMC experience. 50% mitigation on that FVG/imbalance is enough to call it mitigation either wick or candle close.
That's in Lux SR and patterns ๐ค
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Thicker tend to be harder to break
You'd just use normal confirmation
They work for minimal too
after i uncheck the autopilot it doesnt update in the dashboard....
You are most likely using a preset that's overriding that
ehy guys , any info's about "istitutional detector" ? who is the concept ?
I'm actually referring to this tutorial. The lux Profile is in this one - https://www.youtube.com/watch?v=IpLPrTiR4io&list=PLbqCXsOfrM3N4wajKoJTL2G_sojJOl8Vg&index=9
hey guys, just signed up this morning but the premium indicators are still locked? any help would be great
i can add them to the chart but theres a red exclamation mark next to it, and the indicators dont show up on the chart
Have you connected your account? ๐ค
Yep was moved to Lux SR and patterns
logged out and back in to tradingview and its working now, thank you!
Oh Alright appreciate the response thank you so much (:
@indigo cradle thanks ๐
@indigo cradle can u pleas help me find a good setup I am new
Welcome ๐ค
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
@indigo cradle thanks I will give it a try
@indigo cradle I m new here.Can u please set me a indicator setting for BANKNIFTY Future.I have set all but all indicator are not giving perfect direction.
I m from India.I only trade in Banknifty futures
Hi there
What is your current setup? ๐ค
what does it mean if the Sensitivity Box ist red ?
@indigo cradle I m intraday trader.Can u please guide me I want to trade in 1m time frame.
Signal on that setting is a sell
You simply should not be trading the 1m
It's way way too low
its a Day Chart ^^
Anything below 15m is asking for trouble
@indigo cradle ok..
What will be the setting for 15min time frame? @indigo cradle
why i get this "misssignals" ?
@indigo cradle I only trade in this.
Hi. Is it possible to connect Lux Algo to a bot?
@indigo cradle ??
Automated trading robot
What indicators do you currently use?
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
I'd suggest this
Okay. I use the payed version of Lux Algo.
I want to automate my trading with the strategi I constructed. Is this possible?
me to
@indigo cradle i build it in 15 min Chart with the Config from the Video but why there is no buy signal ?
or sell at the tio
top
Via 3commas it can be
You're using neo filter
Which filleted them out
If you don't want this disable neo filter
but in the video is said that the neofilter cleans up the chart for "stronger" signal or i missunstand that ?
It does
That doesn't mean it goes buy sell buy sell
It just means possible losers are filtered
kk thx
guys i just bought the lux algo premium but do you have any setup advice?
We do ๐ค
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
These are our full docs
@indigo cradle any intraday setup ?any scalping indicator.1-5 Min ?
And of course our YouTube: LuxAlgo
perfect, thank you very much
In this video I show some great great methods on how you can use the Nadaraya Watson Envelope in your real time trading.
See NW video here: https://www.youtube.com/watch?v=JpggigF-508
Get Lux Algo Premium: https://www.luxalgo.com
Features used:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#rev...
@indigo cradle thank u..Will chk
guys in the pattern indicator, how do i know what HH or SBOL mean?
is there a sheet for the meaning of these words?
Everything is explained in the docs.
i'll look better
hello good afternoon, I was seeing in tradingview the behavior of lux algo in nasdaq, I was seeing it in different nasdaq servers and it has certain differences in the recommendations of the exit points. By any chance do you recommend any server to follow nasdaq or eurodollar in tradingview?
Nasdaq tends to be the one you want
what does the blue cross say
Take profit ๐ค
@indigo cradle how to deal in this situation?
@indigo cradle is this indicate strong sell?
The strong sell?
Is Strong means should I sell at current market price?
You're using contrarian
It's a bit more advanced and can sometimes miss
But yes
Basically it implies that
Contranian +Exit and candle-Confirmation gradient...is this right setting?
No strong signal given at 1382 and right now it's gone high at 1400. But no buy signal again?Is my setting wrong?
Sir
There are no wrong settings
I think you want confirmation signals
Not contrarians
What is difference in Contrainian and Confirmation signals?
Have you connected your accounts?
can someone help me take a trade
Am new premium user kindly share your best sittings?
Can I give an alarm with 2 values from different oscillators? eg URSI<30 and UMACD Histogram>0 , thanks
hello I'm new I've just taken the subscription I'm French and I would like to know if it is possible to share (through videos and images) the results and analysis thanks to lux algo to other people?
why was there 2 optibot sensitivity's posted today
its not that late in the day so i can do more trades i just need to know which one i use lmao
Take the most recent ๐ค
dose that happen a lot i did 2 trades using the wrong sensitivity it could of ended badly
(it didnt though i hit tp twice)
Hey I have a question guys! Iโm looking for that taki-ashi chart! I canโt seem to find it
The Lux Algo Premium indicator allows displaying custom candlesticks on your charts. These aim to remove the noise from a regular candlestick chart, thus making your analysis easier.
The color of each candlestick method is determined by the method selected in the Candle Coloring setting. When None is selected in the Candle Coloring setting the ...
Was released here ๐ค
What are these two thinks @indigo cradle
take profits and stop losses ๐
thanks
hello, i am loving lux algo and got the annual plan last year. I wnat to upgrade to lifetime, will there be any black friday sales coming soon on lux ๐
yes ๐ coming soon
any chance i can hop on the deal early, my sub expires in 2 days
That would be cheating ๐ฆ I know it's annoying. But if you take out a new plan
You can upgrade pro-rated
e.g. if you are on a year subscription and then upgrade to lifetime on BF
That works
Thank you! Iโm still not seeing where to add it to my chart, however.
Iโm assuming it would be under candle coloring but I do not see it
hi admin and everyone. Is there a way to know if the yellow indicator of the organization's participation as shown in the picture is BUY or SELL?
It would be great to sort out when the institution is BUYING, and when the institution is SELLING
@indigo cradle Hi! How do I set an alert for "TMO" that's triggered when a "Bullish Label" appears? Thanks!
Im not seeing it! Whatโs the name of the indicator? Iโve been searching for overlay
The Lux Algo Premium indicator allows displaying custom candlesticks on your charts. These aim to remove the noise from a regular candlestick chart, thus making your analysis easier.
The color of each candlestick method is determined by the method selected in the Candle Coloring setting. When None is selected in the Candle Coloring setting the ...
should be within here @summer heath
Haha Iโve read this article about 5 times and I canโt seem to figure out what the name of the actual indicator is. Could you possibly just tell me the name of the indicator so I can search for it?
Ah no worries. Add it to your favorites, then you can access the indicator from your favorites folder on the chart (indicators tab) and then go to settings & enable the Taki Ashi.
Youโll have to hide the โsymbolโ in the top left of your chart to make it just the Taki Ashi candles
Ahhhh but I donโt know the name of it to add it to my favorites. For instance like, if I wanted to search โLux algo fibonacciโ I would search that. But Iโm uncertain where to find the indicator to begin with. Do I search โ lux algo overlayโ ???
I donโt see overlay/ taki ashi anywhere in my lux algo premium
itโs in this script, which is separate from lux algo premium
You keep sending me back to this article but itโs not exactly clear to me. Do I search this through an indicator? I am confused
Hi, I need help. I do not have access to the activation of alerts
and in the scripts section only invite appears in red
itโs just a glitch, you should still have access if you click on it
make sure to add it to your chart first, if anything isnโt working, try refreshing tradingview first & it should be good ๐
Add what though????? Where do I locate it to add it???
I simply donโt see the option to use taki ashi hahahah Iโve been looking for almost an hour
I cannot locate this feature to add it to my chart
Is there a bot where we can auto buy and sell on signals??
Is there a way to get mobile notification when there is a buy or sell signal on something you want to keep your eye on??
@feral lava why there is no buy signal in 15min chart?
You have โTracer Filterโ on and the buy signal came before the Trend Tracer was green
Tracer Filter is good! Itโs just it will miss signals sometimes as a downside
If you want constant signals & not a filter that behaves this way, I suggest you turn the Presets to None
Enable Trend Tracer from Indicator Overlays
What is the diff between catcher and chaser?
@indigo cradle does the candle overlay change the price display ?
How to identify these fake breakouts? @feral lava
Nvm. I see it now
From all of the 20+ features in Lux Algo Premium, there's a lot to choose from which can raise many questions. In this video we show how to navigate through the toolkit to specifically find trend confirmations.
The indicator overlays in Lux Algo we show here include the EQ Cloud, Reversal Zones, and Trend Catcher. These can be enabled from wit...
Taki Ashi? it doesnโt
So if you set a Optimal Sensitivity and create an alert, then it stays there right? So if that is the case is it best to use auto pilot?
Optimal Sensitivity finds the best sensitivity per the timeframe
if you set an alert with that sensitivity, it will stay yes
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
this article at bottom goes through โwhich method is bestโ
Thank you
Great to know cos i tot it may affect the price display like the heikin ashi
@jaunty perch @indigo cradle I have a qn wrt setting up filtered alert on the premium indicator. Does it mean i need to install the indicator twice to create one Buy signal condition & another Sell signal condition?
@jaunty perch @feral lava what is sbos and shl?
hi subscribed tool recently . what is best setting for Indian nifty bank ?
Strong break of structure and strong high low
you recommend using auto pilot or checking the opitbot ? @indigo cradle
Generally Optibot is the way to go ๐ค
@indigo cradle Advice please. I'm trying to put the algos to work for me. Which would you consider the better entry, 1 or 2? I've disabled the swing structure on the Smart Money Concepts script, and added Trend tracer (line) to the Lux Algo Premium. Just wanting a 2nd opinion on this setup.
You should not cancel your subscription but instead learn how to optimize and filter out the signals. I used it for a while and upon learning it, the results are exponential. Word of advice (:
Well 1 is definitely the better entry
Why not have 2 entries and scale in?
Right. I thought that as well after I posted. Thanks again.
I'm not used to scaling in but I'll certainly give it a try when the oppurtunity arises next.
Is there any way to create alert for volume sentiment
Sadly not currently
It's not a plot
Hello hope you are well , Any good suggestion what possible settings for the Algo to use if i want to automate the process ? Meaning if i want to create alerts to connect it to bot of mine , Because using Autopilot if you have it automated signals , it might change the signals afterwards . [ P.S . i am looking setting for the Algo , not how to connect it to my bot ] Because the past days i had tried many combinations
Is there a way to know if the yellow indicator of the organization's participation as shown in the picture is BUY or SELL? @indigo cradle ?
Sadly not; it's a scalar quanitity so doesn't have a direction associated with it. It's more of a "hey"
Something may be going on here
Well; What type of bot is this ๐
which TF
what's the purpose
If it is known that the participation of the organization is Sell or buy separately, it will make a lot of sense for the price of the graph immediately after that buying or selling action.
We will see what we can do in the future; it's quite tricky to tell
Normally it's something you'd wait for a move first > retest > entry
I am using it for future trading either short of long , the purpose of bot is create trades i guess . Just i need to find some '' standar settings '' Because i tried most of the preset and many time frames either 5min or 1Hour or 15minutes etc , i tried most of them
If it's organizational selling - we'll sell as well
If it's buying - we buy too
so yellow is showing the organization's involvement, will be replaced by blue to show they're buying, red to show they're selling
I hope the team studies the buying and selling behavior of this smart money flow
We will be attacking that absolutely ๐
5m and 15m really too low for that type of bot
but finding standard settings currently that you can just sit and let run and generate money is ehhh.
If you're going to make a bot; take this approach and apply to 1h / 4h / 1d:https://www.youtube.com/watch?v=3GQ4odUfIb4
In this video I will be showing how a trader can get maximum utility out of the Contrarian Signals within Lux Algo Premium and use them to trade or buy the dip.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Contrarian Signals: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals...
This is one of my faves
Thank you , so basically similar to a TA strategy , kind of anyways , dip and tops
Yep exactly; a nice utility there
I subscribed for a month and my card was withdrawn twice, amounting to $135.98
V strange; give support@luxalgo.com an email and they can fix that for you
What is the best indicator setting?
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
So I read through that a few times and When i set auto pilot, and i set an alert for buy will the alert keep whatever auto pilot set at the time or will it adjust based on the market?
It will adjust on the market ๐
ok interesting thank you
Also im looking at https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview and when i create an alert, i was doing so through the condition of the Indicator not on the coin, is that wrong?
Re-watching the video answered my question
I was not using a condition of like "BTCUSDT" while crossing Lux Algo Premium, i was just using a condition of Lux Algo Premium Any Confirmation Buy, but i seen at the top it says BTCUSDT
Ah better ๐
Temporarily call the cash flow of organizations whales and sharks
- There are many types of whales and sharks with different behaviors and financial capital, so there will be organizations that want to sell, and also organizations that want to collect
For every 1 wallet of the organization, they will split into many small wallets and even smaller wallets in multiple tiers
Their purpose is to use small wallets for transactions to hide the behavior of large wallets
We often see onchain, large wallets are often showing their behavior is selling, but in fact their small wallets are gathering.
OUR JOB NEED TO DO IS:
- Grouping the association of the wallets of the organization, of the whales linked to the different wallet layers, and collectively it is the wallet of the organization
- the occurrence of buying and selling behavior of any of the wallets in the group of wallets above, we all refer to it as the behavior of the organization
- What we need to do is calculate the actual amount of cash flow after subtracting the total amount of buying from selling, and adding up all the cash flows of the institutions.
- If the money flow is positive (i.e. buying) - we will have a green indicator on the chart and the bar is pointing up
- If the cash flow is negative (i.e. selling) - we will have a red indicator on the graph, and the toolbar will point down @indigo cradle
Yep I understand; just we'd need to build this off Tradingview
This sort of data isn't available via TradingView
But this is a definitely interesting project
With that mindset and approach, we will build a very strong indicator like this @indigo cradle
Lux Algo @[LUX] - Admin (Gecko) or gurus here who could advise on how to set up filtered alert on the premium indicator. Does it mean i need to install the indicator twice to create one Buy signal condition & another Sell signal condition?
You would do yep
Total buying amount is positive, the graph will go up
Total amount sold is negative - Graph will go down
Absolutely; it's an exciting prospect
I've been up for 2 days since I bought it, researching your tool
We hope that you will receive and exchange positive comments to add to this tool
We absolutely do; in general if it's a requested thing we do our best to work on it
^
Hi I wanted an alert once btc price crosses Stop loss 1 . However it alerted me when it hit TP 1 instead. Is this how alerting for SL1 is done?
๐ฏ
Probably not using once per bar close
And candle crossed both
Use bar close
Gud Monin , plz i need help on how to set alert for the advance Oscillators , i tried setting but did not trigger, maybe how am not setting right. Thanks
I have more contributions and suggestions on the special warning issue on tradingview
BECAUSE MOST USERS ARE USING THE FREE VERSION OF TRADINGVIEW, THAT WILL BE VERY MUCH LIMITED IN SETTING WARNINGS WITH DIFFERENT TRACKING
I have a suggestion like this, you can research a tool to notify alerts that function the same in most stocks or cryptos
Therefore, instead of selecting an alert for one stock, we can generally warn all stocks on the watch list.
Specifically, I simulated through the figure below @indigo cradle