#๐คsupport
1 messages ยท Page 4 of 1
is there any way to create an alert that triggers when a new liquidity sweep is generated?
Not possible i donโt think - they have it locked down
I have my alerts triggering at the correct timing which is good but iโm having issues with the filters, i set this to signal if the trend tracer /catcher is down (red i would assume) but it still flashed while they were green, i have my buy signals setup on a separate chart the opposite way to avoid confusion in testing out the alerts properly
pls help me.
@indigo cradle when you using 3commas with trading view with lux algo signal to trigger bot by lux algo signal by notification webhook....which bot type is best the best ?? They have dca etc etc option there ???
This might be a daft question - if we want to test alert generation outside of market-hours, what is the suggested way to do so? Apply the signals to BTC?
Please can anyone help with setting up my swing trade on lux algo?
yeah same i need help coneccting my lux algo with my trading view cos i put the wrong account name
when i signed up
How can I help?
Give support@luxalgo.com an email and they can swap
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Its allg now
Is there any way to get the signal to send at the bar end of a bar in a given time frame - close is printed at the current price, so if an alerts goes off at current price and then price changes the confirmation may no longer be present
Also have trouble with the alert filter
I don't really understand; do you have a screenshot / example? ๐
Hi @indigo cradle _ can we club the URSI signals with Lux Premium signal condition, I was looking for some documentation, however did not get it?
What is the use of the highlighted signal condition, can we use URSI on it, if yes, how to set the signal condition?
So thats what i have setup for alerts
And it still signalled the sell ๐
But the trend chaser/catcher was still green not red
So what exactly do you want to set?
e.g. do you want a buy if uRSI is < 50
I'm really not too sure watcha mean linus ๐ฆ
Do you have another way to explain?
I want to use it for contrarian signals, definitely not for the 50 crossover.
What conditions though?
I was just using el example
ez pz
That's for a sell
make sure when you set it the uRSI is loaded on your chart
ok, but does this create only one alert for sell? how about a buy alert?
Then you'd make one for a buy ๐
in the same chart or another chart?
in the same chart but as a new alert
First make the sell
Go to alerts
create alert by selecting filtered alerts
Then go back
make one for buy
ohk, Thanks. Let me try it
If i need to check it, can i see the previous signals on the chart?
They won't appear filtered currently saddly
ok, so it means, i will only get alert, to enter in to the trade
likewise, can i any external indicator too, other than Lux to make signal condition?
You too sir ๐ค
Okay so - iโve set an alert on the 5min chart to signal for confirmation shorts right, before doing that i went into the indicator settings and went to the bottom and added two conditions - trend casher = down, trend catcher = down - however, these alerts are ignoring the filters i applied at the bottom of the indicator settings and i think i am setting up the alerts wrong - is there any guides on setting up filtered alerts ๐
Hi guys; quick little tutorial video showing how to use the SRC input to filter alerts in Lux Algo. Great for automation traders in particular!
After doing this go to alerts menu
Select filtered alert
and done
You are the Top g
@indigo cradle
I don't believe or cannot think of a clean one sadly
What are basic settings for Indian Indices like Banknifty & Nifty, I today only purchased , pls suggest
What should be used for TP and SL,, Can you answer this pls??
Best settings really do not exist; it depends what you're wanting; how you trade ect
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
And this page can help too ๐
Good morning ! How I can add institutional activity. And if there is any video to understand better thanks
GM ๐ That's in the advanced oscillator ๐
It's the orange bars you see shown
meaning big money may be entering positions
Thanks lot
From orange bars for institutional activity- what confirmation to use to catch that trend
You could look for divergences or contrarian signals for example ๐
Any specific alert you recommend to notify institutional activity
You want an alert on it?
Any renko chart hack or stregy video
I was asking for bank nifty video and renk chart still 3 days left for membership to expire hope to see the video before
No one uses Renko here
Hello should I use the sell signal to short is it a confirmation if I have a long order place I should close it
Do you have a screenshot?
Yep this is why you never ever ever use them as entries
Not designed for that
not good for that
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
this video
and this channel will help
Strong sells and normal sells?
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Would 10/10 recommend el docs
Is there a way to create an alert on tradingview when the Trend Catcher changes color?
There is; trend catcher up and down are built in alerts ๐
question on those though - since you have to choose a condition from the drop down menu for the "filtered alert condition" - does it also have to have that tag showing for it to alert? Like if you choose any buy confirmation....can it just mean bars are green, or does it have to have "buy/strong" below to bar at the same time?
Thanks, but in that case I would also get an alert when TC is already green and goes up, right?
Just for when it turns green ๐
will we be getting an alert added soon for when they move up or down?
compared to just color?
@indigo cradle Right, i realize that is what is there now. Would it be possible to request that we have an alert option added though that indicators if they actually move up or down?
It can be green and move sideways all day long and mean nothing as its just ranging....but an actual move up or down of the tracer/catcher indicator(s) indicates actual price movement and change of trend
I was looking at the scalpers preset do I set it to tp 1 or 2? Or do I find an average between the 2 numbers?
As in the plot is moving up itself? ๐
You can use whichever you prefer and suits your RR there
yes, like alert on these upward moves.
You can do this ๐
Where i've put 0.10 put a really small value
so if the plot is 'moving up'
its detected
oh! dang....i never though through that.
i saw that - but it didnt sink is as being what i needed
Whatโs means the X on neo cloud filter ??
Its an exit ๐
no way to link them though is there? so it would only alert if BOTH move?
It would need to be one at a time there
k thanks
What is the tp and sl points measured in?
does the two bars mean it would essentially compare the second bar to the first bar? so you would need it to say 2 to indicator an actual direction, correct?
The higher the number the further away from the price
Yep correct ๐
Tp and Sl ?? what should be the number here for indian banknifty indices
It depends how far you like them ๐
If you like closes in outs
you want a low number
if you like longer term swings
a higher
any ideal number to be used
No sir
for smaller nos sl and tp are very near
Very very rarely in trading is there ever an ideal
Exactly; if it's too near; raise it ๐
So 5?
using 5 but most of time sl or target didnt hit and it changes again
You can exit many many ways
exit points
using an oscillator
Using SR
Using trend catcher
Using contrarian signals
targeting fixed %s
lots and lots of ways ๐
In this video I show how you can maximise your success with Lux Algo's renowned and iconic Reversal Zones.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#reversal-zones
Here's an example
contratrian signal
changes sl and tp as well
i think it will take a month to understand all this
may god bless me
I want to create filtered alert as follow:
Any confirmation buy when,
Trend catcher- green (up)
Stochastic- green
How can I do this please? I couldnโt figure out the stochastic one?
Sadly you can't for the stochastic one
It won't change ๐ค
Thank you๐ hopefully youโll include that on the next update.
what is difference bt contrarian exit and confirmation exit
Nothing really; they are both the same
You can it's a nice easy approach ๐ค
These alerts appear to be a pain point for everyone including me in trying to get setup :p phahahaha
Still havenโt got it working correctly ๐
hello i got the premium indicator today and wanted to ask how long it will take until i see it on my tradingview account
Have you connected your account? ๐
nahhhh
i have bozo syndrome i think so
i ahve this:
Trying to alert for this:
but i am currently getting alerts like:
Yes
Refresh el page ๐
errrr is this on the same timeframe?
Did you ever set an alert for a buy signal?
and accidentally use confirmation sell
e.g. confirmation sell with green catcher and tracer
errrrr and alert 10000% was not set on another timeframe?
You need to select filtered alert
.....
You have selected 'any confirmation sell'
๐ณ ๐คฃ
sorry
Linus tech slips
๐คฃ
okay so now, next alert i create will use whatever the current indicator filter is
so now i can change it to make a buy
0.0
Hello, what would be the best setup please to trade on the 1 minute timeframe?
Ok thank you
Yet there is a scalper filter?
Yep ๐ค some people insist and some have a lot of prior success
I have watched this setup and adjusted my chart. However this is a 4 hour chart. Is there another set up for 5-15 mins charts or scalping?
Can be used for the 15m too ๐ค
im trying to set up for scalping
@indigo cradle what's the difference between all these plse?
And what's the best to select for scalping/ day trade?
good for 15m on BTC?
what does "Lux Profile" in "Lux Algo SR & Patterns Premium [2.0]" do
Yes boss
hello again
so i was watching a yt video and it has this where can i get this?
Mama mia
This is from years and years ago
Old dashboard
From 2y ago
Should we change agility everytime? @indigo cradle or leave on 26 for any timeframe
Leave 26 if you can ๐
I trade at 1m, I use the default settings but base my entries on break or near VWAP
Can't have access to the old lux algo anymore ? @indigo cradle
It was having break out ranges. This new version does not have it
It does ๐๐ค
They were just renamed to liquidity sweeps ๐
Same feature
You can find full change logs in our docs for future reference
Do you guys think OKX is a good exchange for about 5 trades a day?
@indigo cradleHey Gecko. Where could I find more info on what's being shown by Swing Structures concept under the SR & Patterns indicator?
!swings
Here is a video explaining and covering Swing Points in Lux Algo SR and Patterns Premium: https://www.youtube.com/watch?v=KgDdkK5sIhI
In this video I show how you can use Strong Swing Points in Smart Money Concepts.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Smart Swings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#smart-swings
Or the docs ๐ค
Appreciate it!
Hi. Is there a benefit to using the optibot or is just as good using the autopilot settings. Iโm trading ES futures, I do not see this ticker under optibot
@lilac dome
How to set up alert that notify institutional activity
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
@primal quest ^ bottom section on this page explains โwhich method is bestโ
!STUDY ERROR on tradingview
Where are the liquidity pivots? Liquidity sweeps isnโt the same
Liquid pivots were removed in last update, Swing Structures are a better alternative in our opinion & more useful
give us the Swing Structures Alert ๐๐ป ๐๐ป ๐
big updates are in the worlds ๐
Hi. Iโm trading ES futures. Do you recommend any particular inputs for the ultimate MACD. Or any other indicators to help with scalping with Lux Algo . Many thanks
hi team, I have an issue with Lux Algo Premium indicator, the "Volume Sentiment" is displaying "NaN%" instead of a number. Can you please advice? thanks
This means there are no volume available for the ticker on your chart ๐
If that's the case, how come I can see the "volume sentiment" number on the same chart on my mobile phone, but simultaneously have Not a number error on my desktop app?
For which asset? Are you viewing data from the same exchange or broker?
XAU/USD - Broker: Vantage. - Yes, same broker and same asset, just different devise.
Same timeframe?
same time frame, tried on 1, 5, 15, 30 minutes
emmmm hmmmm can I see screenshots from both devices plz?
I did one year can i still upgrade to lifetime via crypto ?
Hi James
I'll DM you ๐
#695668827937177660 is LUNA, luna2 or lunac?
yo
Hi, do you recommend any settings for 3commas DCA bots?
In this video I will be showing how a trader can get maximum utility out of the Contrarian Signals within Lux Algo Premium and use them to trade or buy the dip.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Contrarian Signals: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals...
Something like this
Yes setting for DCA bot
What is Agility in Optibot?
Hey team! Newbie here, any chance that I can add alerts to the Nadaraya-Watson Estimator?
I donโt see any setting on there to add alerts/alarms on trading view. Any help is greatly appreciated and thank you ๐
Sadly not currently for that ๐ฆ
@indigo cradle I set an alert for when price crosses down lower order block. Then the block disappeared ๐
Hi iam new and dont know how the luxalgo alerts work, will it work if i have basic trading view?
is there a symbols chart somewhere to see what different colour lines and crosses mean
Hey- New here. Any recommended settings for Indian Market. mostly options.
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
I purchased the Luxalgo and still dont have access to the indicators on tradingview @indigo cradle
Have you contacted your account?
Yes I put my username in when it said to
How long ago?
yessir lemme try resetting my cache
Is your TradingView account brand new?
Got it thank you i had to clear it out
?
Pleas help
Free TV only allows for a single alert ๐
Thanks
How do I see the alerts and moves made by the indicator? I used to see them before joining premium
Alerts on TradingView?
so the purple is the price of orders and the level they are is for the price the order is?
Tis a volume profile so shows where most volume was traded
oh ok thanks so like in the picture i sent more volume is being traded under value
is it possible to connect the luxalgo with a bot so that when there is a sell signal it sells when there is a buy signal then it buys?
Services like 3commas can do this ๐
hi, i have changed tv accound - how do i get lux to the new tv account
Give Support@luxalgo.com an email
Hi all, can anyone explain what this areas are or how to describe them?
They can swap
One is the overbought area showing the price is overbought and may reverse
The second circle is just an uptrend
So the red one at the bottom is overbought and if it is at the top green then oversold?
if the cloud at the bottom is getting bigger its getting up but can plummed fast at the end of the cloud right?
Yep ๐
Does this apply to Superichi cloud as well? What does the red and green represent in that
What is the message structure for any alert()? Is there a link for it?
Hello I have been trying to reach support on the website can someone please DM
Hi @indigo cradle Thank you for your help with my question earlier today on whether or not the Nadaraya-Watson Estimator supports alarms or alerts.
One last question for now: By any chance do you happen to have an indicator available that is similar to it which I can add an alert/alarm to on Trading View.
We really love the fact that itโll predict on how early we can enter into the next movement (L/S) to maximize profits.
Any help is greatly appreciated and apologies for the long-winded message
@indigo cradle any information on this please?
Ah so the automated alert format?
The envelope has alerts ๐ค๐ค๐ค
Thank you for being awesome! To confirm, this one right? https://www.luxalgo.com/blog/nadaraya-watson-envelope
Yes sir ๐๐๐
Enjoy
@indigo cradle How you doing man? ๐๐ฟ Wanted to ask you about backtesting. Do you all have any videos and/or be willing to point me in a direction to learn backtesting? I want to start backtesting multiple strategies with Lux indicators and other trading strategies I am learning
Yes ๐
Hola ser ๐ค for the moment you gotta do it manual. You'd go through each trade
And calculate
At the moment
I'll check when I'm back but you can quickly test by setting an alert and checking the msg sent
And see the format via this
I will try. But if you get to it before me, please let me know.
Thanks for the support!! ๐
oh okay, Thank you ๐๐ฟ
what are the best setup for 5 seconds charts with aggressive TP?
๐ณ๐ฅถ
I tell people to run for the hills for the 1m
For the 5s....
Rocket to space
You trade this currently?
I got a strong buy โalertโ when the chart was showing โsellโ!
Is this a bug in Lux Algo alert setting? Or am I missing something here
Is there a method to see if the majority of instutional activity is going long or short?
Is anyone using Lux to automate their trading? Looking for a solution to leverage TradingView alerts via webhooks that can buy / sell options on Thinkorswim.
I've seen this being done for Crypto with a number of solutions but wanted to set it up for options.
lovely indicator $$$$
and here i thought i was the only insane person trading at 1m ๐
It was most likely set incorrectly; could I see how you created it?
@indigo cradle Hi I dont know if this is the correct place to post this but would it be possible for you guys to add wyckoff accumulation & distribution pattern in the pattern detector?
It's an interesting one would could for sure explore
It's not so much a fit there
But maybe an OS script
Thanks for the reply, I request you to look into it as it is the ultimate smart money pattern. If anyone can do it, itโs probably you guys. Please keep me updated
Will do ๐ค
On which platform or where
hi, im unable to gain access
Have you connected your account?
Hey gecko I made an alert using the ultimate RSI will that alert still work if I switch my active chart over to another oscillator besides the RSI?
Yep absolutely ๐
used the wrong user name and its set. need it to change please.
Thanks just making sure
used the wrong trading view user name
Give support@luxalgo.com an email they can swap ๐
thank you
@indigo cradle I'm unable to gain access
Have you connected your account?
When i set an alarm in tradingview with sensitive Autopilot which sensitive the alarm will use - the actual? when it is 28 in autopilot then 28 when alarm is set on autopilot 28 - autopilot will change sensitive then the alarm must be set as well again for the new sensitive autopilot?
If you have AP on it'll use AP for the alert
I'm not too sure what your mean by the end there
hi good day admin. i paper trade your tools in tradingview. on the 5 min scalping trade as per videos for 2 days now and i am in a great loss. i bought it from you yesterday and i am doing something wrong or my settings is wrong i am on auto pilot
can you please help
Well there's a bit to unpack
- You shouldn't be trading this timeframe really
Too low
Scalping isn't for most people
- what's your strategy
Can I get some insight?
@jaunty perch
Hey admin I have most of the time use resistence and support levels to take profit and sl , any better time for that strategy?
Any better time? Time in what way?
i will try 15 min
But what's the strat?
I meant with your indicator whats the strategy for sl and tp
It really depends what you like; you can absolutely use SR, Use exit points, use uMACD
Ect
Cheers
i oppend your tools put it on auto and filter on scalper. macd crossings. only buy and sell on strong buy and sell and close position when take profit and loss boxes told me to but my box jump from sell to buy and back before i can close trades
You're using signals as entries?
yes i do
Ah this really isn't an ideal method
In this video I cover the truth behind trend based buy and sell signals and how you can use them in your trading without following them blindly.
Get instant access to Lux Algo: https://luxalgo.com/
This video will really help
3m vid
cool thank you
How to use Lux profile in sr patterns and what time frame
In this video, I show you profile confluence. This is a method where I look for 2 types of profiles to reflect similar ideas in the market.
Get Lux Algo: https://www.luxalgo.com
Features used:
Lux Profile: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#lux-profile
VRMDH: https://www.tradingview.com/script/AEh...
@indigo cradle Is it correct to say its not safe to place limit orders based on the info that the echo provides? Because it constantly changing
For sure I would not trade off it
However
I'd certainly consider it in analysis
Traders love to look at the past and say:
"Price did this then; maybe it'll repeat"
And that's exactly what this indicator does
@indigo cradle ok. So I'm looking at us 30 right now and its selling currently. You you say its Probably not the optimal time to enter because of the projected retracement?
What is better - autopilot sens. or the recommended sens. ?
I have a strange "bug" on TradingView.
On my PC, gradient bar coloring doesn't work (everything from Lux Algo Premium loads up well (neo cloud, etc...). Simple comfirmation bar coloring is working smoothly.
On my laptop, everything is okay, gradient bar coloring as well.
Has anyone had the same thing? Any idea how to proceed?
Thanks
I would say the fast way, re log on in tradingview, remove and add again the Algo. Try to clear browser history fully
tradingview reinstall solved it, thx! ๐
Which rsr setting is mostly recommended to track main support and resistance only, currently I'm setting ranges on 2 but many lines are there
Hi. Is it normal that I don't see the order blocks anymore? Took out the indicator put it back save I did everything and I don't see the order blocks on any time frame?
@indigo cradle Hi. Is it normal that I don't see the order blocks anymore? Took out the indicator put it back save I did everything and I don't see the order blocks on any time frame?
is contrarian good for scalping ?
which tf? ๐
It's exquisite for this yep
What is better - autopilot sensitive or the recommended sens. ?
Is there a video that you all have that explains contrarian deeper for scalping? I Am using the Lux Algo scalping strat on this video with the 77% rate as a base - https://www.youtube.com/watch?v=GETZTJqxZfU&t=260s
In this video, I will be showing how a trader can use Lux Algo toolkits to scalp those tricky lower timeframes and improve those gains! This strategy is simple and versatile.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Confirmation Signals: https://docs.luxalgo.com/lux-algo-premium-indicators/...
any time frame
In this video I show some great great methods on how you can use the Nadaraya Watson Envelope in your real time trading.
See NW video here: https://www.youtube.com/watch?v=JpggigF-508
Get Lux Algo Premium: https://www.luxalgo.com
Features used:
Reversal Zones: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/indicator-overlay#rev...
In this video, I show possibly the next best thing to real time pivot points in trading; the contrarian signal within Lux Algo Premium. They are designed to catch real-time tops and bottoms in your trading.
Sign up for Lux Algo: https://www.luxalgo.com
Contrarian Signals Documentation: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-a...
Enjoy ๐
๐๐๐ฟ
For example BTC I see 1 block on the daily but that's it smaller times frames have nothing only swing structure
I seem to see em
Do you have a screenshot?
1m for me
is it because of the 2 types of BTC.. spot and perpetual
on the spot I don't see any blocks but on the perpetual I see it
ah yes this would change them
yeah spot it won't show ๐ฆ
ah ok but why doge is not a spot and not perp shows it?
u think auto trade 0.o maybe
Hello. I just paid the plan. My user un TV is montalvo2011 but i can't use de premium indicator
try refreshing your TradingView browser/app first
then they will show up ๐
if you entered the correct TV username in the Connect Accounts portal
Thank You! Now it's working
@jaunty perch support@luxalgo.com for order help ๐ค
@grizzled lagoon Maybe the squeeze index?
Hello, I really love the smart concept order blocks but am wondering if for instance the order block comes from a bearish candle if it will have an influence in the direction of price once it comes back to the blockโฆ in this case down? -as smart money passes big block trades to the downside? Hope makes sense thanks for input
It won't really have too much of an impact there ๐ค๐ค๐ค
๐
@indigo cradle - does trend catcher repaint like nadaraya estimator?
@indigo cradle - A small bug in your alerts. The Confirmation Exit Sell Alert has no space in between Confirmation and Sell. It comes like: "ConfirmationExit Sell | timeframe : 5 | BTCUSDT" ๐
Nope ๐
No repaint
Ah amazing; appreciate you pointing this out ๐ค๐ค๐ค
Good mourning,
Premium indicators disappeared from my "invited only scripts" list.
My user at TV is montalvo2011
Hi there; that's odd
Give support@luxalgo.com an email they can add you back quickly
Thank you, I just sent the email.
Hi support. Is there a way to set an alert on Trading View so when there is a strong buy or sell signal with your indicator that i get an alert?
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
legend!
these alaerts can specifically be set up for the buy / sell signals right? as could not see on that link where that is,i read it already.
Please add my account for Prremium signals. Freeverr50140.
Have you connected your account?
Yep absolutely
They are in the alert menu ๐ค
ok thanks will take a look. it did not show on the tutorial
Just a suggest regarding the MACD strategy, is it possible to make buy alert in MACD only if the crossing up is below zero and sell alert only if its crossing down above Zero.? If the MACD crossing up above the zero then alert should not trigger. Any possibilities?
Hello. I still having problems, I can't see the indicators.
Did support say you have access?
You want an alert only for bullish crosses?
Iโm not sure what these areas are called on the Stochastic but is there a way to set an alert for these areas? If not can we get that added??
Yes bullish and bearish both.
We could add ๐ค
This is possible currently
With a cross of 0
Just now I have access! Thank you!
What I mean to say is if we want to make a buy alert only when MACD line and Signal line crossing up below the zero line? Sometimes MACD line and signal line do crosses up above the zero line as well and if its crossing up above the zero line and then it should not trigger the buy signal
Ahhhh I understand
Not currently possible but we can see what could be done ๐ค
๐ thank you
@indigo cradle what does that blue X mean?
what i kinda noticed with the watson is, say your looking at 5 min TF and it blows through that i would move to the 15 min TF and look at it there and then it blows through that look at the 30 min and see where it holds and then enter
How do I cancel my subscription
Hi @valid sedge! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
I'm no expert, but my understanding is that the blue X is a potential exit bar of a long trade.
guys if you keep deleting my question, where is the best place to ask if LUX algo premium has a similar indicator as another one featured in a youtube video?
Would be here, what kind of similar feature are you looking for?
hi support. when you get a signal (buy or sell) on say 15min timeframe. Does that signal post at the start of the new candle or just at a random time in that candle? I am trying to backtest / do historic R/R & P&L but hard to without knowing.
I'm searching for a setting in Lux Algo Premium where I can control when a buy or sell signal is activated in candle. Buy-Green/Sell-red @candle open or at 50% of candle progress in the selected timeframe.
Signals are based on the closing price, so it can vary on the last candle. Signals are confirmed at candle close ๐
Do you avoid in any way that the end of the wick, the highest price during that candle is used? Is there a delay between placing the buy label on the chart and the activation of the signal for webhook? If the signal can be activated on the opening of the next green candle can a profit be generated during the time frame of this candle. The trades in attachment would be a loss.
Hi. Is there a chance that it saves settings on diferent time frames?
Hello everyone.
Hello sir. Do you have indicator to detect the ranging market or prevent the market gonna go to range?
No consolidation, range...
Thank you
You could use the squeeze index?
How can you explain?
@indigo cradle Hi there! Thank you again for your amazing help again! I was wondering, any chance we could ask for a custom dev job to add alerts to the Nadaraya-Watson Estimator?
I know itโs currently not supported, but we would love to pay to get that implemented. https://www.tradingview.com/script/amRCTgFw-Nadaraya-Watson-Estimator-LUX/?amp
The following tool smooths the price data using the Nadaraya-Watson estimator, a simple Kernel regression method. We make use of the Gaussian kernel as a weighting function.
Kernel smoothing allows the estimating of underlying trends in the price and has found certain applications in stock prices pattern detection.
Note that results are subjec...
Hello, this indicator is luxalgo?
I am trying to active but can not.
Thank you
@indigo cradle Hello I can't use the indicator
refresh your browser first
and it should work @pallid acorn
thank you
Hi Support. Using your suggested TP / SL on indicator and have inputted the discord bot 15min settings. The example attached shows if you had entered at the entry price of the candle after the signal (you said signal shows on closing price of a candle) he SL seems to be higher than the Entry price which makes no sense. Attached is an image.
here
please explain
as no point using TP / SL you suggest if they make no sense
Never ever ever use a signal blindly like this
In this video I cover the truth behind trend based buy and sell signals and how you can use them in your trading without following them blindly.
Get instant access to Lux Algo: https://luxalgo.com/
Watch this 3m video
Shows how to enter
Thanks
itโs also that the TP/SL points adjust once they are reached
TP was definitely reached here when price moved up a lot
SL mightโve been reached when price then moved down
It places the levels where you could use it live, instead of just based on the last Confirmation Signal
I replied to you with the url (yutube link) where it is mentioned
but my message was again deleted... how can we do this? can I DM you?
well... I tried to DM you but you do not accept messages from me...
does lux algo premium have any indicator similar to this indicator mentioned right here at this second?
https://www.youtube.com/watch?v=WloWQWedSls&t=375s
Instagram Updates - https://instagram.com/EricRussellCrown
*** 0% FEES on maker orders for both Spot & Derivatives + Free $4450 ByBit Deposit Bonus.
Not For US Residents.
https://partner.bybit.com/b/cavebonus
How To Create A Strategy For Trading - https://www.youtube.com/watch?v=9eZUjWG0pb8
Please understand that leverage trading is very ris...
Seems like it's similar to the lux volatility, but I could be wrong ๐
How can I use the scaner. I don't see the option for react.
How do I connect my trading view with Lux I used the link
And it still hasnโt been available
Have you entered your username?
It doesn't show the same results though... so no, I don't think is that one. Anything else?
what is the best setting lux algo?
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
I just purchased the monthly package and do not have access to the indicator
Have you connected your account? ๐ค
yes
Give it 2m then refresh ๐ค
ok, thanks
Ive got it now, appreciate the help!
@indigo cradle could You help me please?
What do you see?
Good morning /afternoon Lux algo community , on volume what left and right side means
Left side is volume profile
right side is volatility profile ๐
Thanks !!
good evening Mr gecko
I watch your videos on YouTube and I try to follow the configuration(s) for lux algo I follow in good time because unfortunately I don't understand English, it's a pity I can't find videos in French
do you think you can give me recommendations with whom I can have information in French?
Do you have a good setting for scalping? Thank you
@indigo cradle Sorry for the ping on this one.
Hey - Joined up today and I have been playing with a number of settings etc etc
Im finding some strange results between autopilot and the recommended settings, particularly when I attempt to integrate the signals with my 3commas bot
Is there a way to ensure the settings are contemporaneously updated in accordance with the ebb and flow of the market
Otherwise I fear Lux algo may not be what I am looking for
You'd want to stick with default settings then ๐ค
What are you looking for exactly
Hello everyone here. Sorry for bothering.
I am a beginner and I want to learn more about the 'Lux Profile' and the 'Order Block'.
Is it only for notice as support and resistance?
I watched the YT video already but still want more explanation
Thank You so much if anyone can explain to me.
They for sure are mainly used as SR yep ๐
Hi! what UTC is used ะฒ live crypto bot scanner?
Just normal UTC however timezone shouldn't matter too much there
For the next update could you create alerts for the lux dashboard. I see there is already the ability to set alerts for trend strength, but not the actual direction of trend. Also the autopilot signals are different from the sensitivity recommended by the dashboard
Confirmation signals gives you the trend direction ๐
Thanks ๐๐ผ
Hi newb here. how do I access LuxBot and backtest? TY
Hello I am new here too & excited to use LUX algo for trading!
Welcome ๐
How to redeem?
Redeem?
With the echo forecast. I'm looking at gbpcad and the 15 min chart is showing a deep retracement of over 100 pips but the hr shows a very small retracement. How do you interpret this or analyze this?
It adapts to market conditions, it tends to work fine but optibot can be a better option if you can change settings ๐
I run through almost 100 stocks trying to find an entry or exit. So do you think autopilot is more suitable?
I think it would yes, as updating alerts for them everyday would take too long
With the echo forecast. I'm looking at gbpcad and the 15 min chart is showing a deep retracement of over 100 pips but the hr shows a very small retracement. How do you interpret this or analyze this?
Hi where can i find the vip crypto bot?
you mean the crypto scanner ? here ๐ #๐scanners-premium
I have been following with your nadaraya envelope free indicator.
Which preset in premium is it?
What are the optibots and what do agility and sensitivity mean and how are these used? Is there a video tutorial?
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
this link is better actually: #๐ง core-lessons message
Any idea on this?
Hi Team, Can you please add USDINR , EURINR , GBPINR, JPYINR in forex alerts
Which preset is what?
In the scanners?
I have been following the nadaraya Watson envelope indicator. Now i have subscribed for the premium indicator. So do you have any presets or settings which is similar to nadaraya in the premium version?
Yes
Hi, the smart order block could be a support / resistance right? @indigo cradle itโs not like liquidity sweep that changes color
Absolutely it's still an SR ๐
Thank for the reply ๐ I've read the link but cant find the blue and black LA icon on my left hand bar. Is it a separate server that needs adding?
It's just a command ๐
That we like people to run in #๐คluxalgo-bot
Type commands there ๐ค
Ah ok. I think it's the #๐luxbot-commands channel that is missing from my left hand menu. Do I need to add it
?
is Breakout zones in the premium or has it been renamed something else
Renamed to liquidity sweeps in SR
It's missing?
Oh wow
It is
I'll fix
Apologies
TY ๐
@indigo cradle hi, just a quick question on the bot scanner
when it notifies a signal on a forex pair for example, which sensitivity does it uses? 'cause if i go on tradingview to analize the signal, i cannot see it with my actual settings...
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V5 inputs of 12,26).
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / OANDA / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
๐
Awaiting some reply on this @indigo cradle
That is no where close to nadaraya Watson envelope
๐ณ
Nadaraya watson is an envelope; a band where price reverses. However it repaints yes?
It also has triangles for buy sell which repaint
Premium indicators don't repaint ๐ค
So the reversal zones are the real time evelopes that don't repaint
And the contrarian signals are the triangles that don't repaint
All real time
If you're looking for something like the nadarya envelope; chances are you just want to use the NW envelope?
The Nadaraya of course repaints so realistically these two real time alternatives are the best of the best
In this video, I show possibly the next best thing to real time pivot points in trading; the contrarian signal within Lux Algo Premium. They are designed to catch real-time tops and bottoms in your trading.
Sign up for Lux Algo: https://www.luxalgo.com
Contrarian Signals Documentation: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-a...
Hi ๐ Iโm trying to find the liquidity sweep settings can u help?
Tis in Lux SR settings
At the top ๐ค
In this video I show how you can use Liquidity Sweeps in Smart Money Concepts.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Liquidity Sweeps: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#liquidity-sweeps
20 seconds
Thanks trying to set up now
So if I just use this one setting itโll only show liquidity sweep right?
@indigo cradle any luck fixing the luxbot?
Multiple ๐ค
Should work
Try now
Yup. Can see it now. Will give it a go. Thanks for your help.
Hello Guys!! What is this please?
In this video I show how you can use Strong Swing Points in Smart Money Concepts.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Smart Swings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#smart-swings
Thank you MAN! ๐
How do I turn swing structure points on?
Found
I don't know, contact admin ๐ฅด
Is there a breakout indicator option in the settings ?
Breakout in what sense? Do you have an example
to give an alarm in Trend Catcher from red to green do I have to make the settings as in the picture?
thanks
Hi I'm trying to get it working but it locks for me
@indigo cradle Hi Gecko. The RSI multi length how can we setup an alert based on the overbought and oversold peak on the graph?
Have you connected your account?
It's a plot so you can access the plot ๐ So you can have it crossing X
that is what I want as an alert
like this for example
And then for the green zones you'd select oversold crossing 20
good thanks
do you have a guide for sh*taltcoin Optimized Settings?
Trend Catcher up and down It doesn't work, why? look pictures (they haven't given an alarm)
In this screenshot it hasn't turned green yet?
Does ECHO (LUX) repaint?
It does indeed ๐
Consider it a weather forecast
the weather forecast changes
As does the echo
Got it. Thanks.
What's the difference to confirmation buy and contrarian buy
Thanks
Could you please advise if the alert will activateed on the signals on the chart or something else?
Hi there. Just joinedโฆseems to be super impressive all round. Quick question. Right now on QQQ the Dashboard says optimal sensitivity is 27 but the optibot (also on 5 min) says 13โฆโฆwhich one should I implement ? Thanks
Generally optibot is the way to go sir
@indigo cradle what's Qqq strategy?
Hi everyone, im new here. Is there any channel or place where i can find basic to advanced use of the premium indicators?
Superโฆ.thanks for the response
!doxs
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Thank you!
Or gecko Trading on YT
hello I can not to add the luxalgo perimeier this is luck for me
Same here
Hi
Is it possible not to receive discord bot scanner signals for example 2h and 4h timeframe, but only 1D?
Please verify my account. I have the indicator placed, but it does not allow me to create alerts for it. User montalvo2011
Look two indicators are red.
@indigo cradle ,
Can we have a channel for shorter TF traders like me and several others to discuss our strats and share ideas and tools?
I know we are very few in number, it would be helpful is what i feel
Refresh page ๐
So basically a scalpers lobby?
Thank you!
Short Question regarding the Buy and Sell signals. As i seen in many cases there are often happening. For Example i got Buy Signal bar is completed and Buy Signal appears. After that i seen a pullback and then the direction is following up by buy or sell. Is the Lux Algo build as for this case. Wait out for Signal Buy or Sell. Wait for Pullback. Then enter the trade?
Sometimes i see that after the Buy or sell there is even only a slight/small pullback and the price follows up the signal
Thank you very much in advance
Advice to enter the trade during signal appears or even better wait out the finished bar + pullback then enter
lol what happened vip support ? it returns back to what it was before
Question. So is this RSI better than the one we pay for? Lol
I donโt believe our RSI has this feature
@indigo cradle
@indigo cradle is it possible to get alerts/scan for 1H signals on cryptos in the #695668827937177660 ?
people were getting DMd each new post & was becoming bothersome
Ultimate RSI specifically is meant to be used the same way as the classic RSI & give better divergences / trend following capabilities
a lot of the open source work we release for free is more creative & experimental, like the RSI multi length here ๐
Can anyone help me with learning how to day trade
Hi, is there anyway to backtest the Lux algo premium indicator like Confirmation + Exits and Contrarian + Exit? Just like strategies
Currently you need to do this manually
Do you think in near future there will some possibilities of backtesting
It's possible ๐
I just reactivated my subscription to Lux Algo after many months but I cannot get my charts to unlock the indicators. Is there something I need to do to unlock them again? I tried signing out of Trading view and logging back in but no luck
Hi there; give it a few mins then refresh ๐ค
Its working thanks
Where was the breakdown of the new LL/LH/BOS swing structures signals?
I was not finding it in the docs...
Or
In this video I show how you can use Strong Swing Points in Smart Money Concepts.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Smart Swings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#smart-swings
Thank you @indigo cradle .. was just catching up on these.. i was looking in the docs.. but did not see a explanation of COC/BOS/SHL/SHH ect.. your video covered almost all and their use however..
nvm.. that documents link was right to it ๐
liquidity sweeps have been spot on... kudos,,
The sweeps are nice ๐ค๐ค๐ค
Hi @echo furnace! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
Hi. Is ES (futures) available on the indicator setting bot. I could not see the ticker in there.
Currently not I'm afraid; we cannot support futures for now
You could use the dashboard's recommendations
as an alternative
No problem, Is SPY available
SPX is ๐
That will do. Could you let me know how often are the optibot signals updated
Hi @stark saffron! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
yes my vote goes for this too @solemn mauve @indigo cradle
Where to find optibot settings for nifty futures
Thanks
Hi. I'm new to crypto trading. Where can i find simple strategy with settings for beginners using Lux Algo?
!bestsetup
Looking to get a clean setup on your chart? Watch this video: https://www.youtube.com/watch?v=9eNdBtx7hJo&t=0s
Hi guys! I'm back with a video on what I deem to be the cleanest way to make charts. This setup highlights key data on your chart keeping them clean and manageable. No lines everywhere; just simple clean data.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
SMC: https://docs.luxalgo.com/lux-algo-pr...
Which candle is best if i'm using Lux Algo? Normal candles or Heikini Ashi?
In this video, I show what Heikin Ashi candles actually are; the perks and drawbacks of them and how you can use them in your trading.
Get Lux Algo premium: https://www.luxalgo.com
optibot setting vs suggested setting at dashboard, which shud be more appropriate to use?
Second: Does optibot setting work well all across diff sessions (UK and US)?
great vidoe on HA, does Lux recommend one over the other or the signals will be same regardless? I mean do you recommend regular candles for a greater accuracy or HA are alright too?
Any idea why the alarm for Trend Catcher isn't working?
Is the Advanced Oscillator available yet?
it is included in the oscillators toolkit ๐
Can't find it
Invite only scripts -> LuxAlgo Premium Oscillators -> Type -> Advanced
optibot setting vs suggested setting at dashboard, which shud be more appropriate to use?
wow, a lot going on in the advanced oscillators, is there a video on this. Thanks
it could have been set while the feature was turned off, we will look into it\
https://www.youtube.com/watch?v=FA64gszq9YU here you go ๐
We revamped our oscillator toolkit by adding an Ultimate MACD, Ultimate RSI, Ultimate Stochastic, and upgrading other features & modes greatly.
To update: Refresh, remove, & re-add the indicator to your chart.
This toolkit comes with our all-inclusive membership, get instant access at https://luxalgo.com
Full overview in our docs: https://doc...
if the ticker you are analysing is supported by optibot then using optibot would be more precise, as you would be optimising both sensitivity and agility
thanks
Thanks!
How do interpret the echo indicator if each time frame says something different? Do you just pay attention to the timeframe that you trade on?
which timeframes are best for trading with lux algo? if using both intra and swing.
Hey @narrow narwhal see here for our education on timeframes: #๐ง core-lessons message
that was really helpful. somehow i missed "core-lessons". let me go through the channel.
@indigo cradle
Dude please take a look at my question and revert when you get chance please
we generally recommend normal candles because it's actually the real data
it's hard to say really recommend one over the other, just good to know how the data is displayed
@solemn mauve
glad it helps! :))
This video serves the purpose of revealing the truth about the famous Nadaraya Watson Envelope by Lux Algo. It also aims to educate on the subject of repainting and how you can use repainting indicators correctly.
Get instant access to Lux Algo: https://luxalgo.com/
Link to indicator: https://www.tradingview.com/script/Iko0E2kL-Nadaraya-Watso...
watch this video
heyo @flat dome happy to help, DM me ๐
@feral lava what do i have to do to get a question answered? I have been constantly ignored and skipped over
Hi VIP Support, I was looking to get a lifetime membership... YTD I have already paid for $355 of subscription fees, would there be an opportunity to put that towards purchasing a lifetime membership?
sorry for the delay @undone kernel i'd recommend using it in confluence with other indicators, it's one of our open-source indicators so it's generally up to the public for how to interpret/make use of it
here's an example of using it in a strategy with other indicators: https://www.youtube.com/shorts/7Om9_By4f1o
all indicators vary per different timeframes, and this is a forecasting indicator - so it will vary more drastically ๐
Get instant access: https://luxalgo.com
Join our 100k+ community: https://discord.gg/LUX
Free indicators coded by us: https://www.tradingview.com/u/LuxAlgo/#published-scripts
hi @balmy ravine yes you can get a prorated charge by upgrading from within your account at https://luxalgo.chargebeeportal.com
click your plan, "Edit subscription" ---> select lifetime --> then you'll see a prorated charge (see here for how it works: https://docs.luxalgo.com/faq#how-are-prorated-charges-calculated )
Get answers to frequently asked questions including how to get access, product questions, and everything you need to know regarding payments.
what do you mean by repainting. sorry i am new to this, just trying to understand
Question for Lux Algo and hope for future updates
Is there any Tick data that shows the profile of stocks without volume, such as NDX? I would like to see support for stocks without volume.
Is it possible to change the color and transparency of Lux Algo SR & Patterns Premium profiles? The reason is that I have a black screen and it is difficult to see the volume profiles.
Is it possible to increase the number of POCs in Lux Algo SR & Patterns Premium by ranking them?
I would like to move Lux Algo SR & Patterns Premium away from the candlestick on the chart. The distance is too close and it is very difficult to see the chart.
We can explore all of those and see what can be done; we do plan to give SR and overhaul
If 1H says SELL (now) with optibot setting and 5, 15, 30M all still at buy from the last signal, which shud take precedence?
Higher TF generally however use lower timeframes for better entries
Thanks @indigo cradle , trying 1H today for US30 and lets see how it goes. Ofc initially it was under confusion when I posted above message, but after few hours 15M and 30M are in the same line of sell too (as of now).
It def reduces a lot of noise, but I personally need to get used to seeing huge drop in profit multiple times when 5M keep showing BUY. Still trying to conquer that seeing $160 (profit) reduced to $70 and now climbing to $90 again.
What is the good time to exit? When 30M RSI crossover or wait till 1H?
I feel trend is reversing now and max I shud exit, as 30M crossover happening now, 1H still open
That's absolutely an option; RSI could be used. If you feel a trend is reversing maybe nice to use a lower timeframe for an exit too
Damn, I exited early. I know there won't be a clear way to tell, but appreciate the usual best practice that you suggest for intraday trading.
@keen warren what is his method ? Someone posted in profits saying qqq method
Hey gLux- does the trendlines with breaks repaint? just saw the youtube video @indigo cradle
@indigo cradle Hi, how do we setup alert for the lux algo oscillator ultimate macd when the blue line cross the yellow line?
I know how to set alerts when Stoch changes from RED to GREEN. How can I set an alert on USTOCH when STOCH changes from GREEN to RED and also has a RED OB area and vice versa for Red to Green with Green OS area? I canโt figure out how to set alerts for OB/OS areas @indigo cradle
it is not possible to set an alert based on multiple conditions on the oscillator at the moment, but if you have a switch from green to red and USTOCH > 70 then this would reflect what you want to achieve, you can always return the value of the USTOCH on the alert message ๐
@shy relic Hi, how do we setup alert for the lux algo oscillator ultimate macd when the blue line cross the yellow line?
as follows ๐
Thanks!
PLEASE answer my question! Why didn't you answer me? I have paid a lifetime subscription!
Why doesn't the alarm work? (Trend Catch up and down , from red to greem anf green to red) .I tried it at different times in different coins. Look pictures
I think I gave a few points before, everything works on our end but we are still looking into it assuming its from our end, make sure the feature was enabled before making the alert.
I do not understand? what do you mean?
We are trying to see what could cause your issue here, the alerts seem to work fine on our end, so its harder to know what could be wrong. I suggested making sure the trend catcher was enabled before making the alert.
can I do something? Yes, the trend catcher is on when I set the alarm
we will further study this do not worry
can i make lux trade automatic or something like that?
ok, and how will I know when you find a solution?
Hi there. Are you guys likely to do a Black Friday sale on Lifetime ?? Thanks
an update will immediately be released, we are so sorry you are experiencing these issues, we are working on it but when the error is not happening on our end it makes things extremely complicated.
Indeed
Dose the trend cather predict the trend and the trend tracer shows the trend?
Who can take care of a billing issue? I purchased a 1 year subscription Oct 5, 2021. Then opted for a special offer of a one year extension on Nov 28, 2021 that would take my subscription to Oct 5, 2023...But my bank account was just debited for a full year again today?
@cunning geyser you can see it worked on my end
you can mail support@luxalgo.com and they can take care of that for you ๐
using third party services such as 3commas or cornix
the trend catcher is way more reactive that the tracer and can notify on reversals, however they both are not contrarian tools, and are used to follow trends.
Thanks for the reply! Sorry, I did word that a little wrong. Actually I'm not looking for 2 alerts on the 1 indicator, just have a separate alert when the OB and OS "area" red/green pops up
oh then you can set an alert for the overbought area when USTOCH cross over (Cross Up) 70, and oversold when USTOCH cross under (Cross Down) 30 ๐
for the ultimate stochastic?
yes
as follows ๐
ty
You can upgrade your subscription by logging in to your customer account at: https://luxalgo.chargebeeportal.com/
Once logged in, click your account, click on your membership, and select 'Edit Subscription'.
From here you can select your upgraded plan of choice (including lifetime) from the blue drop down menu, see the prorated charge, and click 'Update Subscription' to complete the process.
Done, thanks.
Brilliant product and equally seamless billing process
Much appreciate
Premium not showing in Alert menu. I see also a red lock in the indicator list. Any idea?
try refreshing the page ๐
I saved/closed all charts, trading view close and restart and all ok ๐
itโs for stocks
Hello, One Question: When I am using my celphone... I want to see the time frames 15min, 1 hr and 4 hr with the Lux Algo Premiun.... without the Autopilot and using the configurations from optibot. The problem is that every time I change de time frame the 2 values of Sensibility and agility still the same without any change. What can I do to mantain each time frame with each optibot configuration ?
Hi, i'm a new user .. how can i set an alram for Buy Sell normal and strong signal ..?
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
@hardy field
what does the little red and blue x's mean?
hey I am new , just purchased the indicator but i'm not being able to install it
refresh your tradingview app/browser and it should appear!
thank you co much!!! It's working now
HI, WHERE CAN I FIND THE S/R INSTITUTIONAL INDICATOR @feral lava
What exactly do you mean @hot hawk
Institutional indicator?
Do you have a screenshot
hi support. i follow various tokens and want to use different settings for different tokens. can i do that with lux or if set indicators with X settings with one token then open a new trading view page with a different token and make different settings on the indicators will it affect the previous token?
Sadly it will also change the settings for other charts
IS THERE A UPDATED VIDEO I COULD WATCH PLS?
Hi
Why the order block does not appear in the XAUUSD gold chart
@indigo cradle
No volume data most likely
Yep on GeckoTrading: https://www.youtube.com/watch?v=zDbSx4gDzPA
In this video, I show you profile confluence. This is a method where I look for 2 types of profiles to reflect similar ideas in the market.
Get Lux Algo: https://www.luxalgo.com
Features used:
Lux Profile: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-sr/smart-money-concepts#lux-profile
VRMDH: https://www.tradingview.com/script/AEh...
THANK YOU
Well, is there any solution for the order block to appear?
Not if the asset has no volume I'm afraid
If the asset doesn't have volume
There is no volume analysis you can do there
Hi Admin, just curious to know what is behind the TP X (cross) when it appears. Is it reading drop in momentum, trend, macd cross-over, RSI reading etc?
It is indeed very helpful to secure profit, but in some cases it appears early, so wanted to know what's behind it, so I can plan my re-entry after the initial profit booking.
Ah we'd never ever ever base any premium indicators of this stuff
It's momentum related
But everything here is built from the ground up
No macd cross stuff
Hi. Something i'm trying to understand. On the attached chart the top two charts are Confirmation & Exit, the bottom two are Contrarian & exit. 3 & 5 min. The Contrarian charts are Green Buy / while the Confirmation is Red / Sell. All charts are set to auto pilot. Should the all not be either bullish or bearish. Thanks
That comes from what those signals actually are
In this video, I show possibly the next best thing to real time pivot points in trading; the contrarian signal within Lux Algo Premium. They are designed to catch real-time tops and bottoms in your trading.
Sign up for Lux Algo: https://www.luxalgo.com
Contrarian Signals Documentation: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-a...
This video explains what contrarians are
They go against the trend
So they are trying to detect tops and bottoms real time
Ok. Thanks
Thanks @indigo cradle for answering that TP X is based on momentum, just a last clarification: Is it 100% based on momentum or momentum + LUX secret sauce.
Reason Im asking this, if its 100% momentum, then I can plan my re-entry, if not ill pass and keep kicking myself to exit early, lol.
Let me triple check ๐
Good question
Is there any optibot setting for DXY (Dollar Index)?
I follow DXY more closely to predict US30 moves, so that would be really helpful
Mr Gecko... can you please read my question of yesterday about using lux algo on the cellphone... thank you for your time
Sadly there's no real easy way to do this on TV currently
GM Traders!
what sensitivity do you set for $TSLA- 3M
Thank you!
Hi @karmic summit,
Please email support@luxalgo.com for any order enquiries and they will assist on the same day.
@indigo cradle @shy relic ,
Guys the alerts are firing in the completely opposite direction , this is occuring on and off for quite sometime now, can you please take a look into it?
ITs firing for buy where there is a clear strong sell or down trend.
attaching the snapshot with the alert, my lux algo premium any alert call settings, the time the alert fired and the blue lines that shows the downward trend
Out of interest is this something you just find on lower timeframes?
Or also on higher
I use only 1m TF, regardless it should not fire strong buy for strong sell no?
its throwing me off on the trades a bit
yep, the alert is times at 11.44 eastern
and the lines showing the candles at that time and the next min
you can also the alert log highlighted in blue box
@solemn mauve you got alerted for a buy turn strong, possibly for the candle prior to the one highlighted. You seem to also be using confirmation gradient, which isn't best to note when a strong signal is active. Could you possibly share you settings so that we can check? ๐
The settings are in the attachment
I have checked only those pertaining to buy settings
I mean your signal settings
I dont understand, I have attached the alert creation window and the premium's any alert function settings, what do you mean by signal settings?
anyways attaching the other sesttings
I am referring to settings such as sensitivity and agility, if you have autopilot enabled or not.
ticker is FNGR with heikin ashi? can't seem to have the same results. Maybe you have the data provided by NASDAQ instead.
Hello I set up the alerts to receive them as a text and to be shown on my notification list and I still canโt see them what should I do?
Once you create the alert you should receive desktop notifications, if you do not maybe that you did not allow Tradingview to send notifications, this can be fixed trough your browser
Thanks
Yeah the ticker is FNGR, I am just showing whats coming up on TV at 1 min, is that your 1 min chart?
regardless, need to come up with a solution for this, cant have these inconsistencies though,
After testing nothing seems to be wrong on our side, the conditions in the "any alert() function call" works properly. The alert could have been set using different settings and could explain this inconsistency, we will still take a look into it.
hmm, I will delete and recreate again, not sure how it could have diff settings since I dont change any of them once set, but please do look into it and let me know if there was anything on my side to be looked at
Thank you
will definitely be looked, will keep you updated.
Thanks bud
Hello guys. Do you use optibot for higher tf like (15,30,1h,2h,3h) or auto ? Which one would be better?
Any luck?
exits are based on a distance measurement
if price reaches a certain distance then an exit is generated
So if it deviates enough from the entry it produces an exit
I'm sorry there's not more information there
It's a v v nice method though
Thanks @indigo cradle for the clarification.
Just a humble suggestion, if we can have a repeat signal after TP X (exit), in case the trend still continues?
Many thanks Chief, looking fwd for new release more eagerly now
So with the strong/normal buy signals, would we exit our position or reduce it when we see the blue X or orange X? Thanks
Also, in ranging choppy markets is it better to do confirmation or contrarian?
Hello, Iยดm love with the Nadaraya-Watson Estimator.... BUT... I canยดt setup any signal alarm on Trading View because It doesnยดt appear on the list " condition " in the alarm setup..... Question: How can I obtain those signals from that beatiful indicator?
Hi
if there is no volume then it wont show up ๐
How can I use Lux algo premium indicator as a trigger in my py strat file. I canโt seem to find any source code or documentation for it
What exactly are you trying to do?