#๐คsupport
1 messages ยท Page 1 of 1 (latest)
๐
Thank you
Guys I just assigned me a role in the view scanners section is that all I have to do , and where do I get the alerts ?
Never mind found it ...๐
Yes ๐ thatโs exactly what Iโm looking for
Is there a video on it?
which strategy is best suited for a 1 minute timeframe
Massively recommend against this really
What does R mean on tradingview when it show does this mean Reverse?
Where do you see an R?
Thank you for letting me know ๐
what is the minimum timeframe?
There isn't really a min
But for most people they should not go <15m
Hey i would like to ask is there any chance i can automatize this trades so when it show buy trend or sell trend to do it automaticaly?
So I would just go to all the coins I want and timeframe
And Iโll get alerted
If a double bottom formed or other ones
Yes sir ๐
3commas can allow for this ๐
I think the trend strength activates way to late at times. Sometimes the move is already complete when it reaches 50
@indigo cradle should we change the setting of sensitivity and agility everyday which is updating from optibot ? Or what you suggest to use autopilot? Thanks
Ideally yes
A daily update ๐
Can you add 2 more alerts here: Normal Buy Turn Strong and Normal Sell Turn Strong please?
hi what are the blue circles on lux algo premium?
Those are just the plots
Those can be ignored
Sadly plot limits are an issue there
@indigo cradle what is trend strenght what does it mean ?
higher values of the trend strength determines if current prices are non stationary, that is if prices is making new higher high/lower low, lower values would indicate a ranging market
What is the LUX ALGO SR Patterns/ Style/Boxes used for?
they are used to change the colors/style of the displayed features ๐
What is smart money
Whatโs considered higher and lower ?
the trend strength is shown as a percentage, in a range (0, 100), higher = stronger trend, above 50% can be considered trending ๐
the smart money is an estimate showing the percentage volume traded by institutional investors on the current bar, for more info see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/dashboard
Thanks
Hi! Set up notifications via webhook on Trading View for Buy & Sell signals, but actually, I'm getting more notifications than appeared on the chart - for example I can get Buy or Sell notification, but none of them seemed to be on the chart ๐ฆ
I have not been invited by lux in trading view
I see forx signals on discord dont we get crypto signals
Is it possible to add more altcoins to the scanner alerts?
how come I'm not on the life time list?
Hi @indigo cradle king
Should i only buy above 200ema and only short below it?
On 15m
@indigo cradle hello, I believe this is from your video on youtube, What oscillator should I use to replace this one from the video that was "discontinued" Or a new one to get the same effect / use this strategy. thanks
I need to know how to set an alert when the pivot trader from the oscillator changes colors from green to red. I have a nice setup but need to know the steps to get the alert setup. I tried myself but not sure what settings needs done in alert setup. Thank you
@indigo cradle
Goodmorning guys..
Is the advanced main the stoch / rsi / macd version in the advanced setting ? Or is it different than a stoch / rsi / macd...
or a combination of more indicators ?
Because if I have for example an normal stoch running and a advanced main.. I'm not looking at almost the same things ? .. there is a difference ... etc etc..
Thanks.
I'm supposed to have lifetime subsripshion in one of these. Miles.#9663 or Miles741#2748 Can you let me know which one it is so I can give it the proper email
Hi, Can someone advise please why itโs not retesting the previous support and itโs going below it ?
@vale salmon hi please give manual access. invite only option unavailable
its on a downward trend, your MACD is bearish
Even if the indicator didnโt give any sell signs yet ?
Thanks bro
Ride the trend, as long the pullback are still within your RR, there isnt a reason to exit a long position. Just try to scale out a position to lower your risk when youre in profit.
Scale out means take profits?
yes
theres number of ways to do it, for me, when i am in green i take 75% of my position, and i just leave the 25% to run and just take it out when it starts to pullback hard
Ok thanks bro
Give support@luxalgo.com an email they can add you ๐
It's a valid approach or just use the neo cloud
@shy relic @indigo cradle @vale salmon Hi:) if its not too much trouble, can u addฤฑr Lux Upcoming update divergences? Rsi, MFI, CCI, Macd, CMI etc. For ex, if u choose Just one of them, lux shows u on the current bar divrrgrnce, also if u choose 3 of them lux will show us the their divergecens on the current bar
Normalized was released in legacy oscillators in #๐new-indicators ๐
ฤฐs it possible ๐ ๐
Is this solved?
We can start to include auto divergence but for free indicators it wouldn't go into premium ๐ we'd do it on our custom indicators๐
That s oky, u are awesome

Did you connect your account
Whats this oscillators name?
Thanks๐ค
I cannot find this advanced oscillator. Is it a setting of something? Thanks.
Found under "Type"
๐
Is the any alert function coming to the oscillator?
You already have ๐ what alert are you wanting to set?
For example, I need to set advanced major buy with institutional activity in one alret.
So an alert when there's a buy with activity?
When either of them went off. This is because I have limited number of alerts. And I don't want to set 2 alerts on single indicator.
sounds like you need a better TV account
Yeah that's a solution. But I think it's possible to do something like the any alert function () in the main lux indicator.
Ah so an any alert yep we can consider ๐
@indigo cradle curious on what the green and red "clouds" represent on the stochastic... divergence? Price at extremes? fyi, this is by far the best indicator for short term credit spreads (almost like it's cheating ๐)
Overbought and sold zones ๐๐
Glad you like it ๐ it's quite a simple one to use
Those zones appear when the oscillator is overextended
@indigo cradle gotcha. Yeah, I take credit spreads based only when the oscillator has reached or touched the red/green lines and I see the clouds. Obviously works better in ranging markets, but credit spreads with the trend is easy money. Thank you for all you do my guy.
@indigo cradle I still need help with this
I need to know how to set an alert when the pivot trader from the oscillator changes colors from green to red. I have a nice setup but need to know the steps to get the alert setup. I tried myself but not sure what settings needs done in alert setup. Thank you
@indigo cradle still need answer for my question :)
I'd suggest remaking those then ๐๐๐
Probably were using different settings
For the forecast? Let me see if that's possible
switch to green == alert when osc is equal to 0, to red == alert when osc is equal to 100
I cant find that anywhere to do that, here is what I have. Can you send me a screenshot where and type where to go?
@indigo cradle Ive searched the alerts, I dont see where I set the ocs = to 0 and 100
Would someone experienced in technical analysis be available and willing to chat? I need help understanding what I may have done in a specific market. I'm afraid I may have created a massive fear spike completely unintentionally due to lack of understanding of the forming trend or something like that? Anyways's I'd really appreciate it if someone could take the time out of their day to have a chat with on the subject
Select crossing value 0.01
And use once per bar close
thank you, very much appreciated
I am sorry for this amature question. On the Lux Algo Oscillators premium and RSI multi length how do I know when a trend is turning? I mean how do I know where is the bottom of the price in short term letโs say in 15 minutes time frame. Thank you!
You'd look for either 1 of 2 things
Overbought / Sold RSI
Or divergences ๐
It means that divergences is for trends?
Divergence in the oscillator ๐
Thanks
@indigo cradle can you check my dm whenever you have time?๐
ah sorry it got burried
No worries mate, your a busy man๐ ๐ค
when setting breakout zones with the newest version i get these gray lines
I have 0 idea how you made your lines grey
Did you change the color?
no. i removed all the indicators and went back and reloaded them. then started setting them up again playing with various combinations.
i just removed SR&Patterns Premimum and re-added it to my chart again just now. selected breakout zones and I get the same thing
On all charts?
i started a new chart and it doesn't do it on the new chart
and i have another chart which was already using lux algo (but not updated to the latest today) and it does not do it
ill try updating that one
it doesn't do it.
so its only my first chart.
i have all other indicators turned off. oh well. if you want me to send you the chart somehow i can do so. otherwise, at least I know the workaround for my end
here if this helps
I have never ever seen this; will look into that
thanks. it may help to know prior to seeing this it seemed to be working but I was experimenting with all sorts of settings on the lux indicators turning them on/off and seeing what they all looked like. so perhaps it just got into some random combination or sequence that caused it
Very possibly ๐ณ Never ever seen it before; have you tried removing some of the other indicators you have added?
@indigo cradle do i have to set indicator settings every time i switch coin or it saves sensitivity for each coin separately
I set alarm on its page but it doesnโt work, otherside I was trying normal way but it still doesnโt work
You'd need to switch it sadly each time
May I see screenshots of how you set these
i have a question, which candle type work well lux algo. eg" candle or heikin ashi ?
@night beacon
Both will work ๐ Just be aware of the perks / cons of each
HA are nice for trend following but can of course not be the real closing price
i removed all other indicators including the SR&PatternsPremium and saved the layout and loaded the SR&PatternsPrem indicator and turned on breakout and it still does it
๐ณ
You removed them all
Then re-added?
and it still was gray
i think its possible to share charts. maybe I could share the chart with you for you to debug if you wanted
I would have assumed its something to do with the large amount of indis added
and removing everything
then just adding SR back should work
yes was still gray. here it is again with all other indicators removed
some other useful data perhaps. This is the TV app on my mac. Not a browser. Also, I've had it open for several days. Maybe even a week.
this happens on other assets too?
but I always use pivots. This was the first time I tried looking at breakouts. of course like I said I was turning all sorts of settings on/off experimenting this morning. so I just found some strange combination which caused it.
ya. i switched to AMD and it does it
crude oil
Hi there ๐ Have you connected your account?
Yes
Try refreshing your tradingview ๐
Got it
@indigo cradle hello Sir! please Will want to Migrate my Lux algo subscription to another tradingview account
Hi there Boch; Give support@luxalgo.com an email and they can swap those ๐
@indigo cradle
okay
Waiting for signals forever
You're waiting for a trade?
Yes
hello, i try to setup alerts to sending normal signals like sell or buy but i failed, can someone explain me how to setup this alerts to send only sell, buy, sell strong and but strong?
Can have only 1 alert is basic trading viiew
Dont we have a discord for singnals coming in
What is the best setup for traiding on 15min charts for both longs and shorts
๐ค๐ค๐ค
These will help a lot
Massively
Hi @indigo cradle king
Whatโs the best indicator for identifying pullbacks in an ongoing trend for entries
?
Hi, is any video where is showing how to setup a good lux setting and stratedy?
#๐must-watch a lot of good content here ๐
I have Lux algo installed on my tradingview and enabled alerts. Sometime i receive 5 buy alerts within some Minutes. How can i only receive one alert (Strong buy Button)?
Use once per bar close ๐
can't see the dashboard for oscillator in advance mode but it is showing in tutorial video
is there any change?
yes, it has been removed
Is the agility option showing for anyone?
I had same question i don't see it anymore
has it been removed?
Hi! Installed Trading View notification for Trend Catcher Up, works on the bar's closing. But it's simply does not working. I think it should work every time when bar is closed, and trend is up? :/
For example, if chart's interval is 1m, it should work every minute if trend is still up, don't it?
@delicate laurel @sleek phoenix it is still there in the advanced settings ๐
trend catcher up only alerts once the colour switch from red to green ๐
Thank you
What is agility
Is there any way to automatically apply the Optibot settings from the Discord channel for stocks? If so is there a tutorial on how to do this?
agility is a setting that controls how sensitive the confirmation signal algorithm is to ranging/flat markets ๐ It range between 0 and 100, with 100 making it not sensitive, this produces less signals ๐
unfortunately not at the moment ๐ฆ
Where are the optibot settings for futures likes ES and CL? Thanks
Optibot does not cover futures at the moment, you can see the recommended sensitivity in the dashboard instead :)
Thanks
Hey guys. may I ask how you choose which coin is the best to trade since they are almost all in similar building if you know what i mean
The dashboard?
The trend strength in the mts column follows which other indicator? Trend catcher?
Trend strength in the MTS?
In the pic above, It says 0.11%
Yep but it's not in the MTS ๐
The trend strength takes reference from which other indicator?
No other indicator ๐ Like most features all in house calculations
Just analysing the market state
So if its higher than 50%, how do we know if its a strong bull or bear trend?
It would be fairly obvious to the trader at that point ๐
You would visually see a very clear trend
and any oscillator / trend following feature would show the direction
e.g. trend tracer
Hi,
I got an alert of a confirmation buy turns strong.
However, only the buy signal shows on the chart.
Is this what is supposed to happen? Or should the chart show a strong label?
Thanks.
Ahaa got it.
Thanks
How to configure best settings, I am new to Lux Algo?
Me to
I tryed that one with the lines, but only loses
Dont know what i doing wrong
First pic showing strong sell, but start climing up
After couple min there apeare buy
Is it always like that? I did everything like in video
did you read the manuals from the website?
i assume so
Welcome ๐
Give #๐ง core-lessons and #๐must-watch a check ๐
Which video?
YES PLEASE, Need Manual for this strategy
For Optibot settings what chart exactly are you guys using ?
5tf
What TF you most recommend to use with Advanced Oscillator since i see alerts on Major buy and Major Sell are not happening alot in 1H TF?
Hello dear support, I subscribe your serviรงe but I canยดt find on Indicator menu " Invite Only Sripts "
Done ๐
๐ Welcome
Hello Admin Gecko ๐
Welcome aboard ๐
Do you know if Pivot-Based Trailing Maxima & Minima [LUX] Repaint??
It's pivots so the pivots behave as pivots ๐
It's not realtime-ish
I understand; ok, no problem; I will figure it out.
Cheers.
Hi, I'm new, how can I use optibots?
Welcome ๐
New video with all methods explained: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Here's a quick video on the multiple ways you can adjust signal settings within Lux Algo on TradingView and use Optibot within our Discord. Optibot is backtesting private data with our algorithm, while the auto-confirmation signal settings toggle is just an esti...
Thanks"
can we get optibot setting for eth/eur or btc/eur bitstamp?
You'll be able to use the USD pair on lower timeframes to a very similar effect
ok thanks
โบ๏ธ
When I set Optibot for BTC/USDT, can I separately set the settings for EUR/USD or any other asset. Because it shows same on all charts settings
Is the oscillator premium latest version 5.1 too?
It is ๐
Since the currency pairs here move tiny tiny amounts realtive to BTC price action its still ok ๐
Could i get an answer to this please , for example BTC/USD are you using charts from , binance, bybit , FTX ? Because charts from different exchanges do give different signals .
Would need to check where our data provider gets their data ๐
Dear Admin Gecko. I'm new to LuxAlgo. Is there any BEST PRACTICE guidelines ?
What's does the blue candle mean
go through #๐ง core-lessons and #๐must-watch
Ok thanks
In general to trading? ๐
Or Lux specific
@indigo cradle I try to reach dm but I couldn't
Send me a friend request ๐
Ok
Hey Lux Algo's Admin team, you beautiful creatures... is the Visible Range Mean Deviation Histogram similar to how the Visable Range Volume Profile indicator operates?
I read about it on TradingView and I wasn't 100% sure
both are relatively different but share things in common, one being that they operate using visible range data, and another one being that they accumulate data when price fall within intervals, however a volume profile shows the accumulated volume within each interval, while the VRMDH count the number of times prices fall within an histogram, finally the intervals are built differently.
hello, how to make a alert when green or red is comming?
try the following condition
alerts not working
the add alert box is greyed out
on lux algo premium
nevermind.. for some reason on desktop i cant add alert but on phone app i can.. interesting
Hello๏ผI registered my TradingView user name, but still can access to the indicators?
try refreshing TradingView, should pop up
Ok, itโs done, thx
So i made a alerts for forming patterns but its delayed like it says double bottom formed but like 6 candles later on the 5m and its already done
it took an hour to alert me
Hello, where can I find when the trend is ranging from the dashboard?
Can anyone help me with ultimate macd setting for 15m and 1h?
Hello Support is there any signal in LuxAlgo or in Trading view which give signals when MACD line crosses to signal line everytime ?
This seems like it's ok no?
Pattern hasn't even completed
What help are you looking for?
I mean I would like to be able to enter this pattern
The trend strength metric can help here ๐
You could no?
Maybe on that one but I donโt think 1 full hour I thought it would alert me when it formed and confirmed
Like a few times I get an alert and check it out and itโs already completed
Should I keep inputs in default to macd for 1h and 15h?
This is sadly how any pattern is identified. But in that alert is seems like it's very trade able. To see if something is a pattern you need to wait until the pattern is formed to confirm
If you wish you can
Ok
Support ?
Thanks for the reply, In the settings there are other options too "Entering Channel - Exiting Channel - Inside or Outside Channel" how do we use these parameters ?
They are for when a price or plot enters or leaves a user defined channel
You don't need to use these unless you have a reason too most of the time
While creating a same alert i am unable to set the condition UMACD Histogram ?
Ensure you have the Oscillators loaded
Oscillator is already loaded
I trying to figure out the optibot when I change the sensibility and agiliti it's change the all se in one setting such as if I change the eurusd the sensibility nd agiliti is the same for other pair .just confused how to use it
Any suggestions please
Yep say TradingView doesn't really have an easy way of saving settings
The best options is
How to save settings for a trading pair on TradingView:
@indigo cradle great thanks
@indigo cradle whats the difference between UMACD Histogram crossing and UMACD Signal crossing as for an alert?
Identical
Histogram is based on the cross
ok thanks... anyway is it possible to set an alarm anytime that Advanced oscillator when Advanced cycle starts moving up/down
if you know what i mean
thank you so muc
should i make two seperate alerts for one coin? for Moving Down and Moving Up?
Actually
The issue with this alert is it will keep alerting
You'd want an alert for crossing down 80
Or crossing up 20
so like this right?
major or minor?
While creating alerts what's the purpose of Stochastic Cycle or Trigger in Crossing ?
Major ๐ค
A colour change in the stoch
ty
@indigo cradle quick question on advance indicator how to know if the institutions are buying or selling?
That's something that would need to be deduced using other indicators ๐
Looking at the trend
Or oscillators
Or overbought or sold conditions
Very possibly yep. Stochastic was overbought first
Suggesting it's more likely to be selling pressure
hmm
well I got the idea but I'm still confused imma try to study it for now, ill just ask question again if I really can't solve it haha anyways thanks for the fast reply!
It's basically just a little warning
That something is about to happen
It's like a little alarm
Does anyone have experience with optimization settings?
Is this a help question or you're just looking for users feedback?
this is help question
What's the issue? โบ๏ธ
I play in Turkish stock markets. On the 1-hour chart, the relevant stock is very good in some places, it is mixed in some places. Do you have time to make the best optimization? i am sending you two pictures
It's a classic issue of the ranging market. Since these signals are trend following you'd need to use a filter of some sort
For example look at the trend strength on the dashboard to see market direction
Or use the neo cloud
ok thanks
So in what percentage of the trend strength indicating the trend is ranging?
Is it possible to set the MACD display as 4H on a 5 minute chart?
I would say above 50 is a clear trend ๐
Sadly not; no MTF capabilities
are you guys looking for entry and stoploss at lower TF or higher TF's?
Auto pilot and changing the sensitivity according to the dashboard, which one is better?
is there any video on how to use lux profile?
Not really a video but we have docs on it ๐
It can be used very classically
how to trade pullbacks?
In general or using the profile?
in general
how do i know that the price is still holding the trend and just taking a pullback?
Well to trade a pull back 1) You need to have a clear idea of the trend
So to identify the trend; we can use confirmation signals / trend catcher / trend tracer
To catch a pull back you want some sort of trailing thing
So you could use the NEO cloud
when price comes back and touches it
re-enter
if there's a sell signal and both trends are red
can i just enter the trade after candle is closed?
I would suggest waiting and not using signals as entries in general
okay
i've actually compiled an amazing strategy that i use for scalping
with lux algo
i just keep on testing new strategies
amazing to hear ๐
where is pattern detection?
under premium SR & Patterns indicator
but i mean the dashboard patterns
In this video I will be showing how to use the Automatic Pattern Detection within Lux Algo Premium and use it to trade.
Get instant access to Lux Algo: https://luxalgo.com/
This feature can detect the major chart patterns: Rising Wedge, Falling Wedge, Ascending Triangle, Descending Triangle, Head & Shoulders, Inverse Head & Shoulders, Double ...
That shows up when you turn on pattern detection ๐
here it shows on lux algo premum, but I don't have that section
It was moved to its own indicator ๐
hello! How can I interpret futures channel signals?
they are more a "hey check this asset out, open the chart see what you think, do some analysis go to a lower timeframe and find an entry if you like"
Ok! Thanks
Boost and add to faves ๐
thanks
Hello, for the lux volatility, when the status shows moderate, but ๐๐ this 2 emoji appears when the price goes down or up, so actually which emoji indicated uptrend and which one indicated down trend๐๐ป๐๐ป๐๐ป
It's just whether the volatility is rising or falling ๐
hey guys
so 2 things
1- how can i change the time zone in my TradingView account if that is possible
2- after i bought the indicator i lost access to many channels like the top signals one and like that ( why is that )
Hi there ๐
You change the timezone in the bottom right corner
- These were just public channels ๐
can i have access for the signals one
- thank you
So๐means falling, ๐means rising?
Yes sir ๐
Those were just 5m alerts ๐
Hi, I just join , added 3 indicators and there value as showing in youtube video and join Discord group here to , is there anything else i need to do ?
Welcome ๐
You're good to go
#๐ง core-lessons and #๐must-watch are great places to start
hey Just signed up for lux algo. trying to add it to my traderview but dont see invite only scripts section
is it because I have basic traderview?
Welcome ๐
Give it 1m and refresh and itll appear ๐
If not just search Lux and you can use it
Is what normal? โบ๏ธ
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
what best time to use with prem-Indic... 5M or 15M or 30M ?
The higher the better in general ๐
does lux include any momentum indicator
Of course ๐
The oscillators
MACD is a momentum indicator
As is a stochastic
oh lol sry mybad
Hey, i am using the SR&Pattern and since today the โblueโ Trendline is grey.. i tried to fix it in the setting but it doesnโt work.. is this a new Setting in the Indicator or do you have an Tip how i could see them blue again? Thx
Do you have a Screenshot?
Hi I just signed up but i canโt get access to the indicators in TradingView anyone can help?
this happened the other week
Have you connected your account?
Yes
Refresh tradingview in 1m and check ๐
It worked tnx
OK. The main thing is, they are here.. and as long as I don't act incompetent, everything is fine.๐๐
sensitivity and agility need to change by indicator setting bot time frame daily or leave as showing in instruction video ?
That is very up to you; they can left as default or changes as you see fit )
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
I using sensitivity at defut 13 with 15M BTC /USDT but its not look good it was strong buy signal but next 3 bar down down ... sorry i am new here just trying to get all perfect
Hello LUX TEAM! Iโm a newbieโs at trading and I would like to have some support to adjust my strategy using your software; who can help me?
Iโve recently subscribed 3 months ๐ค
๐
lux Youtube video help me alots.. try that
In this video we cover every method for how to properly optimize your signals within Lux Algo to fit your trading style. We cover the best way to manually adjust sensitivity, how to use optimal sensitivity, auto-pilot, and Optibot.
Instant access to Lux Algo: https://luxalgo.com
Join our Discord: https://discord.gg/Lux
Follow us on TradingVie...
hi
Can u add me to tading view?
I baught one month subscribtion\
?
does any1 know how this indicator is callling
TY Daniel! How long are you in trading? Do you trade crypto?
same like u new here
Lux Profile
when strong signal come normally you need to buy or sell on same candle or wait for next and then follow signal buy / sell ?
Can anyone pls share to setup an alert based on trend catcher + trend tracer + Eq cloud
Any Help ? what I am doing wrong in Chart with Prem Indicators ? BTC /USDT with 15 M
and there is no sign ..when to close exit , like lit x
You're not using the signals as "Confirmation"
Seems like you have the setup from here enabled which is great ๐ https://www.youtube.com/watch?v=v9TYKiKFtuk&list=PLbqCXsOfrM3N4wajKoJTL2G_sojJOl8Vg&index=1
As the video states, you would wait for a buy signal, and THEN wait for MACD to cross from Red --> Blue for a potential entry
The signals themselves aren't meant to be used blindly; #๐ง core-lessons message
Hope this helps!
Get instant access: https://luxalgo.com
Join our 100k+ community: https://discord.gg/LUX
Free indicators coded by us: https://www.tradingview.com/u/LuxAlgo/#published-scripts
Thanks maybe i am doing something wrong .... let me check that part MACD from red to blue and blue to red
@hoary hare
You would wait for a buy signal first, and THEN wait for MACD to cross from Red --> Blue for a potential entry
that's an example of a strategy you could use with our signals ^ as in the video ๐
that is at the same time as signal, so not exactly an entry idea according to the strategy
it would be, now wait for MACD to turn red, and then once it turns blue again ---> potential entry
example 1st buy signal then MACD candles turn red to blue and blue line crossing up and crossing yellow then wait when blue candles become red or blue line become red to blue again then buy ?
Hello, The optibot setting are the best setting for signals based on backtesting. But If I change the sensitivity and agility manually to get the best settings those change each day. So how will be I be able to perform manual backtesting because as soon as I go back more than one day the best settings for sensitivity and agility are different??? @feral lava
that would be a more proper way to use the signals, yes
recommend reading through #๐ง core-lessons - it will help here a lot ๐
it's impossible to get better settings than optibot manually unless it's just a preference thing for making the signals fit your style
optibot will update daily for some timeframes but still can generally apply for more historical data.
if you're looking to manually backtest over more history & don't prefer to update w/ optibot for daily use, i suggest using a different method
probably manual itself to your preference or autopilot would be best in this case
This is kind o a dumb question, but it it possible to backtest Lux Algo premium on TradingView using it's buy and sell signals>
?
This is what I am trying to do. So far I just put the signals up and scroll back. Is there a better way to perform backtesting @feral lava I am even looking into many criteria for better signals (neo cloud, trend catcher, reversal zones)
@safe sierra is that what you are using optibot for? Im new to this indicator
Is that Valid Lux
You can use replay mode, or just look at historical data - it's not a strategy script though so no, but please remember signals are for confirmation; not be taken blindly
@safe sierra ^ best to just use replay mode / historical data
in the example you show, MACD crossed before the signal
it needs to cross after a signal as explained above
You would wait for a buy signal first, and THEN wait for MACD to cross from Red --> Blue for a potential entry'
Got it, first signal then crossing ๐
is this the right way to set an alert when RSI reah at overbought/oversold level (can we use Entering Channel instead of "Crossing" so we can create both condition for overbought and oversold in 1 alert
So that is the setting for whatever it looks for to provide signals. Optibot comes out based on something and says these are the best settings. The other way is auto pilot but that is not the same setting as optibot. Please let me know if I am incorrect @feral lava The question would be can we have the optibot setting pulled in automatically ????
Hi guys, sorry for noob question but is kucoin a good exchange for trading?
Hello everyone, just a question. What does minimal buy and minimal sell mean and how do I activate this feature.@[LUX]- Smack
That is where I do most of my futures trading.. So my opinion is yes.
@feral lava Optibot says the sensitivity should be 18 and the dashboard says it should be 16.. Does the dashboard do something different ???
@safe sierra I see - so you would use a strategy with lux algo, then trade on kucoin right?
hi
Hi does v5.1 have pattern detection?
pls how to remove red and blue clouds from the trnd?
yes
disable NEO cloud
Where can I find it? Thanks
ths, helps after disable trading style as well
thx
I need help linking my indicators to my trading view
Hi there; is this fixed?
You'd most likely want to use Optibot. ๐โบ๏ธ
any idea why the breakout zones are blue and grey and doesn't look like they used to?
Are you on mobile?
Is buy signal than macd crossing above strategy will work on lets say daily or weekly timeframes?
Absolutely can do ๐
It's such a weird bug; happened to another guy
functionally the same of course
but very odd
we will look into it
btw, what is the function of the function alert on SR & patterns?
For patterns detected ๐
This means i get an alert when one of these apear right?
Only if you create the alert ๐
This is a tutorial on how to use our brand new all-in-one alerts system within the main Lux Algo Premium indicator on TradingView. This makes it easier for users with the free TradingView membership to get multiple specific conditions in one alert.
See the guide on our docs: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/alerts#...
ๆฅๆฌ่ชใฎใตใใผใใชใใฎใงใใใใ๏ผDiscord็ฟป่จณใงใใชใใงใใ
Hello, using the breakout zones I see the resistance red part turned dark grey. Thanks for having a look at it see attached
ๆฎๅฟตใชใใใๆฅๆฌ่ชใฎใตใใผใใฏใใใพใใใใGoogle็ฟป่จณใไฝฟ็จใใฆๆฏๆดใใใใจใใงใใพใ
It's a weird visual bug; it's functionally the same
Just a weird visual thing we are looking into
I wrote to TradingView too
Itโs the same with their pivot point standard
They updated their code maybe?
Possibly or more likely something memory related their end idk
Thanks
็กๆใงไฝฟใLuxAlgoใคใณใธใฑใผใฟใผใจLuxAlgoใฎๆๆไผๅกใไฝฟใใใคใณใธใฑใผใฟใผใฎ้ใใฏใฉใใงใใใใพใใ๏ผVIPใ ใจๅ จใฆๆจฉ้ไปไธใซใชใฃใฆใใใฎใงใฉใใTradingViewใงๆๆใฎใคใณใธใฑใผใฟใผใชใฎใใใใใชใใงใใ
ใใฌใใขใ ใคใณใธใฑใผใฟใผใฏใใๆๅพ ใฎใฟใฎในใฏใชใใใใซ่กจ็คบใใใใคใณใธใฑใผใฟใผใงใLuxAlgoPremiumใใใณLuxAlgoOscillatorsใใใณLuxAlgoSRandPatternsใจๅผใฐใใพใใ ๆฒใใใใจใซใ็งใใกใฎใใญใฅใกใณใใฏ่ฑ่ชใงใใ
3ใคใใpremiumใคใณใธใฑใผใฟใผใฏใชใใฎใงใใ๏ผ
ใใใใฏใใผใซใญใใใงใใใใใๅใคใณใธใฑใผใฟใผใซใฏๅคใใฎๆฉ่ฝใใใใพใใ ใใจใใฐใLux Algo Premiumใซใฏใ20ไปฅไธใฎใคใณใธใฑใผใฟใผใใใใพใใ ใใจใใฐใใใฌใณใใญใฃใใใฃใผใพใใฏๅ่ปขใพใผใณ
Geckoใใไบ่งฃ๐ใใพใใใ
Same thing with one of your trendline Colorโฆ grey, fyi
Geckoใใใธๆฅๆฌ่ช็ฟป่จณใฎใณใใฉใๆฟ่ชใงใใชใใงใใใใ๏ผ
็ฟป่จณ้ฃๆบใขใใชใไฝฟใฃใฆLuxAlgoใฎVIPใฎใฌใคใใชใฉใใใใใๅๅผทใใใใฎใงใใ
ใฌใคใใฏใใฎใชใณใฏใซใใใพใ๏ผๅคๅใใชใใฎใใฉใฆใถใฏ็ฟป่จณใงใใพใใ๏ผ
ใฌใคใใ ใใงใชใLuxAlgoใฎDiscordๅ
ใฎ็ฟป่จณใใงใใชใใฎใงใใใใ็่งฃใงใใชใใงใใ
YouTubeใชใฉใงDeepL็ฟป่จณใใผใซใจใใใฎใๅญๅจใใใฎใงใใ่จญๅฎใใใใใใฃใใงใใ
when i go in to the settings menu and change signal sensitivity to 14 the dashboard does not change it is at 10. Auto pilot is off. It never matches no matter what indicators I use. Any Idea why?
ใใใใพใใ; docs.luxalgo.comใ็ฟป่จณใงใใพใใ๏ผ
What do you mean by this?
The dashboard is suggesting a sensitivity
Not telling you your sensitivty ๐
In the vids I see on YT when they change the settings the dashboard sensitivity matches so I just wanted to check
Well that's simply because they are just copying the dash ๐
The dashboard is suggesting they change the sens to let's say 12
and the user is going to the settings
and changing it to 12
so they match
Ok, Thanks
This may not quite fit in this channel here but would you recommend the 30min chart for trading as an absolute beginner? AMC/GME have brought me 2 years ago into the stock market and since then I only average down and hold.
I currently have my alterts set like this: 30m, filtered signal alert with trend tracer up, once per bar close.
What other variables should I look for in order to decide whether a buy/sell is recommended? I think to just blindly follow the signals is not very smart?
30m is a nice timeframe absolutely ๐ And this is a reasonable and useful alert to have set; have you seen any of our strategy videos for examples of other things to look for?
It's quite a personal thing and really does depend on which features you are using or enjoy
e.g. if you like reversal zones / hypertrend you'd want to consider those too
Do you mean the strategy videos on the Lux Algo YouTube channel? I will definitely take a look at it thank you ๐
Si absolutely ๐
What is the advantage of ultimate stochastic vs regular stochastic?
The Ultimate Stochastic oscillator combines the earliness of a stochastic oscillator whilst removing noisy variation via a process inducing less lag than using pre or post-smoothing.
It would be nice if divergence is also shown in the ultimate stochastic?
For divergences the Advanced mode may be more to your liking ๐
That's all real time divergences
No lag
I am new. Can someone tell me which strategy is less risky- so that I can try.
- Use a nice and high timeframe
depending current market situation ofcourse
- read #๐ง core-lessons and go through #๐must-watch ๐
And then I'd say you'd want something very classic
like 4 hour or 1 day?
Exactly
and then apply something very very classical
like this
Have you connected your account? ๐
I did not follow the account problem already solved
๐ฅต
yes i got it to work tyyy
Pattern-detection channel in Discord is only for Stocks ? right ?
Correct ๐ You'd need to set alerts on your own chart patterns
Can somebody help me to how set an alert on polynomial regression?
Sadly you cannot as it's made of lines
OK thanks
What are the best indicators to give you an edge over the market so you can take a decent profit?
What type of trader are you? ๐
Well for me personally I like to trade Forex as I mostly day trade, normally on the 5m on 10m chart.
So which Lux ones have you been using? ๐
Well Iโve been testing with a few of them but Iโm just wanting opinions on what you guys would use
Hiya, i was curious if it is possible to run with a Demo account. Can i just simply run my ICmarket broker and test my setup first?
It's really such a subjective thing; my personal faves are trend catcher; some confirmation signals that are optimised on minimal mode; reversal zones
and advanded oscillator / ultiamte MACD
That's totally doable ๐
Awesome ๐ Same for ETH right?
Yes sir ๐
Thank you, I will give this a try ๐
Thanks ๐
Does selecting heiken ashi candles effect your trading or is it just a visual preferance?
It will effect all indicators and trading yes ๐
Because of the nature of the heiken ashi support seems unbroken however price already moved down, what should be the approach?
It's typically used by people who like trend trading
But comes at the cost of being smoothed
Or laggy
Can help eliminate noise
and clean trends
Ahhh I see thanks gecko as always
Is it possible to set an arlam on the Ultimate Oscilator when it swiches from red to green and vice versa?
Which one ๐
it is the ultimate oscilator that is in the lux algo oscilator
This is the ultimate stochastic ๐
We also have an ultimate MACD
This will alert for a cross of the ultimate stoch
Thanks,
Hi can I directly open lux algo directly to binance and not in trading view app?
Sadly you cannot currently
Maybe one day if CZ decides to integrate Lux ๐
@indigo cradle ok thanks ..
Reposting because I donโt think I got an answer. It may have been lost amongst all the others. Can you help me figure out why my alerts are not firing properly? So, as you can see in the screenshot i have one set up for both Strong sell and just Sell on the 4hr TF. 7 minutes ago I got the Sell alert. However, when i go to TradingView the actual alert printed many candles ago. Any idea what is wrong?
how to cancel this membership?๐ง๐ง
the alert log time can be different from the one on your chart ๐ If you just received it then see if the alert was not set using different indicator settings.
Get answers to frequently asked questions including how to get access, product questions, and everything you need to know regarding payments.
TY
I would like to be alerted every time trade catcher changes colour. Is it possible?
thanks sir๐ฅฐ
you can set one "trend catcher up" alert and another one using "trend catcher down" ๐
I can not get the screen you sent
Hello support. I would like to ask: Is there a way to backtest the Lux indicator automatically and show you the profit/loss for a specific time frame and time period?
@shy relic When you say the log time could be different from my chart, do you mean the timeframe specifically or some other setting like UTC-4? If you mean, the TF, then I would say those are set the same (as you can see in the screenshot-i.e. 4hr TFs). I donโt see any other settings that might be responsible for the discrepancy.
I indeed mean the timezone, not the tf, the alert log use the same timezone as yours, not the one set on the chart.
The indicators can only be tested manually at the moment.
Thank you!
Create a new alert (click on the alarm icon), in Condition select the lux algo premium indicator, then below select "Trend Catcher Up" or "Trend Catcher Down" ๐
I understand. The problem is that I get only currency name in Condition raw and n0 drop menu
Works after reseting. Thank you
Is there any chance to remove lux dashboard from screen ??
You can from the advanced settings ๐
Thanks
@indigo cradle too the position at the arrow.... was hoping the price hits the target...so what shud be the exit
@indigo cradle does lux have an indicator that shows the price stochastic will turn up and what price it will turn down based on what ever the current time frame is...
potentially a good signal!
trend catcher being green too would be a better sign
What about that red line not become green
@shy relic can maybe explain in French ๐
that's Trend Catcher
Should i wait that red line trend catcher become green to ?
่ฆใฆใฟใพใใGeckoใใใใใใจใใใใใพใ๐
Cette histogram represente le profile de volatilite, et indique la volatilite de specifiques interval, avec des bars plus longues indiquant un interval plus volatile ๐
Merci, je pensais que c'รฉtait les liquiditรฉs !!!
c'est le cas, mais seulement la partie gauche (solide) du lux profile, la partie droite represente la volatilite ๐
๐๐ผ that was good one
Look like the trend cacher if red line was not matter if +++ trend tracer is green & strong buy signal come ... go ahead
๐๐ผ
But if Trend Cacher & Trend Tracer both becomes Green & strong buy that might be more suitable??
@feral lava is there a way to set an alert for when trend tracer changes color and not for each up and down in value. like the stoch cross trigger
Looking nice All 3 green .. let see in next 5 to 10 minutes
@feral lava The only problem.... buy exit & sell exit not showing up on time ??? Already set alert for that as well ??
Can I trade just following trend cather?
I wouldn't recommend that being your only thing
Maybe it's your most used feature though! #๐ง core-lessons message
All 3 at the same time, this is much better here!
Just please don't consider it 100%, it is still possible the trade will reverse
#๐ง core-lessons message
Tnx lux
The indicators ain't working for me, how do I request a refund?
Hi @polar spruce email support@luxalgo.com
@feral lava ??
Don't give up soo early, give it try a week.. & keep asking help in support that's what i do
https://youtube.com/shorts/A9f8K37z1DU?feature=share
Try that with 5 min & use only strong buy & strong sell
Hiya, i am currently using Auto Pilot mode. Does that use the settings from #797529919499272224 (i run M15)? Or should i check this channel every day and adjust settings?
It's a different method ๐
Use optibot if you can ๐
Thanks! Saw in the video that Optibot is more reliable. So better to adjust the sens and agility every morning according to optibot, correct?
Ideally yes ๐๐ค
I'd recommend that
Perfect, thanks for the support ๐
one thing that i realized with the lux algo, sometimes it puts a buy or sell and then if the candle goes the opposite direction. The signal disappears
!confirmed
A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.
Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".
cheers
For the alerts: do i need to set it up again after every time i change the sensitivity? I saw in the video's that the Alert is set for the current sens, so you need to remake the alerts every time you change your sens and agility.
You would do sadly; you'd need to remake it ๐
Hey just a quick question does the optibot update it self everydayand if so which one would u re recommend using the autopilot or the optibot
Welcome โบ๏ธ
Once a day before market open
In general I'd recommend optibot ๐
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
Hi, is it possible to change the colors of the RSI? I don't see any option for that
The one below
Sadly not currently ๐ฆ
Ahh okay
want to use the light version of tradingview
since i always used it
but am not able to see the line of the RSI when im in light mode
We can try and add it in but TV is very very weird with colors
Could always try it tho
Pretty confused, i get an alert for a strong buy, but when i look at my chart i don't see a Buy ''button''
set it to candle close btw (the alert)
Which alert did you use? ๐
ah i might have messed it up. Will fix it myself ๐
@indigo cradle do we have liquidations maps tool as of now?
Sadly not as this kind of data isn't really accessible via TV
@[LUX] - Admin (Gecko) does lux have an indicator that shows the price stochastic will turn up and what price it will turn down based on what ever the current time frame is... Not sure if I missed the response above....
@indigo cradle I'm looking to set alert on the condition of trend tracer and catcher based on them being red or green. Can't seem to get it to work am I missing something
I see, but are you guys planning to do in future?
maybe?
on like website
Like a forecast?
For sure; we like this sort of data ๐
What are you trying currently ? There are trend tracer up and down alerts in the built ins ๐
Hello Everyone... New to LUX. Looks good so far. One question... Anyway to add Elliott Wave to the tool as well?
Welcome ๐ We always avoid / never put things that you can get for free into anything paid ๐ But it's avail for free on TV in the built ins
Yes that is exactly what I'm using
Hey guys! I bought 1 month 10 mins ago. I don't have acces to the indicators yet
yes, it's available but is not reliable. Hence this request ๐
Understood ๐ We can explore
But doesn't seem to be working.
Very odd; have you tried remaking it?
Have you refreshed?
Like close and restart the indicator
Yep ๐
And remake the alert
so delete it
and remake
you can look into thekingfisher.io
anyways it's pretty late here in JP goodnight!
have a great day!
hello lux algo have indicator for supply and demand?
We do ๐
Lux Algo SR and Patterns
Breakout zones in there
thank you
Yes exactly like this example.. Stochastics will turn down at XXX or will turn up at YYYY.. Just like the attached image...
!update
To update Lux Algo Premium indicators, refresh your browser/app, remove the indicator from your chart, and then add it back to your chart + save your chart layout on TradingView.
Full guide: https://docs.luxalgo.com/lux-algo-premium-indicators/how-to-update
I love this idea
we don't currently
but i like it
do you have video explaining supply and demand strategy whit lux algo?
In this video, I will be showing how a trader can get maximum utility out of the Breakout Zones within Lux Algo Premium and use them to trade price breakouts incorporating momentum.
Get instant access to Lux Algo: https://luxalgo.com/
Lux Algo features used in this strategy:
Breakout Zones: https://docs.luxalgo.com/lux-algo-premium-indicators...
๐
This channel has gold ๐
Ok thanks.. I know about ultimate stoch.. Do you have any other indicators there refer to stochastics ???
๐
Currently not I'm afraid ๐ฆ we can work on some
In this version 5.1 there aren't breakout zones?
i don't see this settings
They are in Lux Algo SR and Patterns ๐
See your invite only scripts
you have 3
It's not in the main
done!
Is there somewhere I can submit a request so that I can track it .. If it comes out ????
did not get or understand your unswer...
For what? ๐
I've logged it ๐
different indicator. Look for "Lux Algo SR and Patterns"
hi @indigo cradle bแบกn cรณ thแป nรณi tiแบฟng viแปt khรดng?
Nแบฟu tรดi thay ฤแปi thรดng sแป Signal Sensitivity theo tรนy chแปnh thรฌ cรกc thรดng sแป cแปงa Oscillators cรณ cแบงn thay ฤแปi khรดng?xin cแบฃm ฦกn
Are it's possible connect gains. traid to binance acc. Ant start sell short on ganes trade? Can't short in my contury on binance. Any help plz?
Chร o bแบกn; Tรดi khรดng nรณi ฤฦฐแปฃc tiแบฟng Viแปt nhฦฐng nแบฟu bแบกn thay ฤแปi ฤแป cแบฃm trong lux algo premium thรฌ nรณ sแบฝ khรดng thay ฤแปi trong bแป dao ฤแปng
bแบกn cแบงn phแบฃi thay ฤแปi ฤiแปu ฤรณ trong bแป dao ฤแปng
You want to connect something to TV?
@indigo cradle no. I can't sell short in my contury.. Are it's possible some way connect gains. traid to binance acc and start sell shorts. I don't cnow how to due. Try vpn.. Dns and still can't short..
I'm not too sure sorry ๐ฆ what country is it?
ah im really really not sure
@indigo cradle are u cnow somthin obout gains. traid?
gains traid?
Yes
They have sell short. And its awalable for my contury
Are it's some way connect binance to gains traid and start sell short
I don't cnow... Just try everything
I'm really not familiar with them ๐ฆ
It's okay. Thnx anyway
Maybe you cnow any ather ways how to short. I see video on YouTube. They speak abaut margin cross. How you think are it's posombe use margin to short?..
hi, i want positinal trades on CRUDE OIL for 15min on trend trader preset. what is the best settings on lux algo premium?
Setups are so personalal
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
you can see some here ๐
How do you use optibot?
New video with all methods explained: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Here's a quick video on the multiple ways you can adjust signal settings within Lux Algo on TradingView and use Optibot within our Discord. Optibot is backtesting private data with our algorithm, while the auto-confirmation signal settings toggle is just an esti...
Hello, how to sett alert for when under eq cloud and for above eq ?
You'd select price exiting channel EQ lead and EQ lag ๐
That would be whenever price leaves eq cloud right? its possible for just down or above?
It's a bit tricky because it's 2 plots
Price crossing above eq lead
and price crossing below EQ lead
I dont mind if its 2 alerts, thanks!
so its always EQ LEAD no EQ LAG?
EQ lead is the one you want ๐
I though lead was upper band and lag is lower one
Lead is just the more responsive one ๐
okey gotcha thanks!
@indigo cradle thanks and do I need to update every day
You will do yes ๐ Just before EST market open
Ok but I see when I change setting for example eurusd it's change for eurgbp like all how do I keep the setting individual
How to save settings for a trading pair on TradingView:
Thanks
you provided optibot video, but I can't find US OIL or CRUDE OIL settings there, could you please provide me best settings for crude oil for different timeframes?
Sadly those are not supported so you'd need to either use the dashboard
or AP
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
Sorry last question after save the file of different pair does it make alart automatically
You'd need to set these ๐
I see there is alrat option on trading view is thare I need to set it
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Got you thanks
sensifity is 12 give a lot of crosses and sell signals but stil is going up ? What do i wrong??I am sitting in a short
I closed my Trading View desktop app few mins ago and reopened now and all my charts and settings are gone. I signed out of the app fully and logged back in, but same. Anybody here knows how to restore TV ? This is happened to me twice now since I bought it. I dont see their customer service number or email to contact them.
make sure to save your chart layouts before closing the app, if its the case then it might be a bug.
How come a inverse heads and shoulders isn't recognized in the patterns? This is pretty clear.
@indigo cradle @shy relic Here is the alert setup that i using i tried setting up a fresh chart with a new indicator and new alerts and still nothing is triggering any help would be great. Im using the same thing for the Trend Tracer as well.
Thanks @shy relic Yeah I save the layouts every time. I think it may be a bug then. Do you know how to contact their support?
you can open a support ticker here https://www.tradingview.com/support/, you can also enable autosave
Thanks @shy relic I will do that. Yeah I have the Autosave enabled.
I am playing around with the take profit/stop loss indicator. When there is a distance to the stop like this does it ever switch to short position? Or is it indicating to have a greater stop loss. Just trying to figure out how this was meant to be used. Thanks.
Anyone knows where I can find LUX Volatility metrics? One of the YouTube videos shows it in the premium indicators but I canโt find it anywhere
the tp/sl are based on the signals, and continuously readjust depending on whether price hit one of them, tp/sl will never be inverted except if a new signal appear, you can adjust the tp/sl distance from the advanced settings ๐
Isnโt it possible to create a TradingView strategy using LuxAlgo buy/sell alerts and backtest it?
Can you not refer to LuxAlgo buy/sell alerts in the pine script editor?
Is there an issue with the Trend Tracer alert? Iโve used it many times so I know I have it set correctly but itโs not triggering my alerts anymore
Im havign the same issues
Ya I was just now scrolling up and saw your post too. Have you heard anything?
why would the candles not turn green
can you let us know how the alert was? If the feature was disabled when setting the alert then it wont work
if you are using confirmation candle colouring then a candle would turn either green or red when a strong signal is active ๐
i reset mine today and i still am not getting log signals or webhooks on trend tracer or chaser
do you have a screenshot on how the alert was setup? It should be working as per usual
Iโve tried it on different time frames, different coins, Once Per Bar, Once Per Minute, Once Per Bar Close. Nothing seems to fire the alert. The Trend Catcher is triggering just fine for me, only the Trend Tracer being wonky.
mine is set up like this
Hello how to set alerts for these ? (Highlighted in white boxes)
We will have a look into this ๐ค
Banned
Hi
Why can i only open a lot 1.00 trade for US30? No way to open 0.1?
The emails are not going through to my email
how does any alery function work?
does it give alert on candle close?
@indigo cradle king
It will by default ๐
Can someone explain the cross at the top or bottom is based on what?,
It's trend analysis ๐
Analysing when the trend may end or reverse
Nice for exits
Yes but most of the times it gives false signals
It cannot give a false signal ๐
It only exits in profit
They aren't signals either
In this it gave the exit sign but the price kept Mooving upwards
It's a very nice place to scale out of a position ๐
Tones of profit
Trend showed weakness
Very logical place
It naturally cannot exit at the exact tops and bottoms all the time
OK if you say so
Question on the Lux Algo SR & Patterns indicator, The predictive SR, I have set it to Ranges and 2. see that this runs from values 1 to 10. What should be the settings on this for 5 min, 1hour, 4hour and Daily chart? @shy relic @indigo cradle
It's one of those how long is a piece of string; what are you using it for? ๐
TPSL?
SR?
Hey LuxAlgo-Team,
Is there any way to get the "Discord-displayed" Alert-Signals from the -LiveCryptoBotScanner- to a privat EMail, Webhook or to a phone? Thx.
Sadly not via discord ๐ฆ
If you set alerts on TV you can send them to email
I checked these alerts (picture). My problem is i do get a lot of alerts for a chart saying there is a buy/sell signal and when i check there is nothing.
Because you're also setting alerts on contrarian signals
untick those (if using confirmation sigs)
Ah go you, what does Contrarian Buy/Sell signals do?
They go against the trend ๐
!docs
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
You can read more about signal modes ^
Ah ye i am using contrarian + exits on my charts. So on these i should untick Confirmation Buy and Sell, correct?
perfect
When I daily update the Signal-settings according to OptiBot do I have to create a new TV-alert everytime or will TV-alert realise that I have changed the settings?
You'd need to create a new alert to use the new settings ๐
Scenario: When i want to invest 1k in a trade, and have 10k in my account, should i invest 0.1 lot? or how does that work
is it possible to do strategy testing on lux indicators? i haven't found any information on how to refer to lux indicators in pine script...
Sadly not as you'd need to create the strat using our indis
And then build it into a script
but we are looking into it ๐
@indigo cradle anyway you can get an alert when the tracer switches colors?
Hi. For the filtered alert can I on the same crypto have one buy alert and one short alert? Like having any confirmation buy with the conditions and have the any confirmation sell with the conditions and have 2 separate alerts?
So what does Smart mean % mean exactly
And the trend strength
I do understand em a bit but would be more helpful to actually understand em
@indigo cradle Is there a way to see or avoid these type of signals. There is a buy then a strong sell ?? I have already been trying different setting and time frames.
Hello just purchased the premium package but was not able to connect my TradingView account as itโs saying there is an issue with my username
@indigo cradle Hi. For the filtered alert can I on the same crypto have one buy alert and one short alert? Like having any confirmation buy with the conditions and have the any confirmation sell with the conditions and have 2 separate alerts?
Hello, why is the indicator lock colored red ? Thanks for reply.
@[LUX] - Admin (Gecko) I am trying to get alerts (and also see them on my screen) based on a set of criteria for example any buy when trend catcher is also green also any sell when trend tracer is red. Once I see those signals I will attempt to filter them down using the other filtered criteria. Alert example any buy, trend catcher green, etc.. Basically how do I set up the filters and see them on my chart then create an alert and the alert would be based on multiple criteria ...
Is there a Lux algo bot that will use luxalgo premium stuff but trade for u automatically?
Also Iโm sure this is somewhere but a basic volume indicator is helpful to me, do one the settings here give volume?
If I want to have Ultimate MACD from a higher time frame, like 15m on 5m chart. Do I just multiply the length with 3, or so I also need to change something with the fast, slow and signal?
I just tried that and doesn't seem to work that way. LUX any suggestions?
Thank you for the reply back - its set on confirmation simple. I would assume since there was such a strong upward momentum it should have green candles
not red
@indigo cradle Alex seeing this now. So I use it for S/R yes. Putting my question across here again - Lux Algo SR & Patterns indicator, The predictive SR, I have set it to Ranges and 2. see that this runs from values 1 to 10. What should be the settings on this for 5 min, 1hour, 4hour and Daily chart?
@indigo cradle @[LUX] anyway you can get an alert when the tracer switches colors?
Yes, add alert for โTrend Catcher Upโ will give you a signal when it turns green โTrend Catcher Downโ for redโฆ and exact same for the โTrend Tracer Up for Green / Down Red