#๐ฌhangout
1 messages ยท Page 287 of 1
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Excuse is repaint???
No repaint
Exquisite
It's a complex situation for now but we are looking at it ๐
And one more how I can cancel the every month and I see for more time?
Click Manage Account here: https://luxalgo.com
Or email support@luxalgo.com and our team will assist you with any request the same day.
The time cancel the Subscription finish this momentum??
I'm sorry I don't understand
If I cancel now the subscription
Close now or@i f the indicator final month ?
Today i initial@the month
Final month
Ok thanks a lot
which is the best way you guys are using to filter those Buy and Sell signals? like RSI and MACD ?
because there isnt any forex pair with the symbol name AAPL, thats a stock
Thanks my friend
Understand my friend something other ?
Love this support and Resistancae . Just wait for restest and caught a 3.5:1 RR in less than 10 min . Done for the day ๐
Hi, i need some guidance. According to the lux indicator, it says SELL. I believe that means I can short trade. But it seems the candle is moving upwards instead. How do you usually trade so that it will have a higher chance of win rate? What other LUX indicator do you use besides the Confirmation Signal?
I'm using Lux in trading Crypto and usually 5min timeframe.
Have you seen my 5m strategy? This could help
@empty solar the reversal zones?
In this video I showcase how to trade the 5m with Lux Algo and increase your profits and chances of identifying reversals. Make sure to leave a like & subscribe for more trading strategy videos!
Get access to Lux Algo indicators: https://luxalgo.com
Lux Algo features used in this strategy:
Reversal Zones: https://docs.luxalgo.com/lux-algo-pre...
Not that I'd recommend trading the 5m of course
@empty solar what time frame do you usually recommend?
Nothing sub 15m normally
@empty solar sorry, what does "nothing sub" mean? does that mean not lower than 15m?
Nothing below 15m ๐
ok. thanks.
@empty solar is there an alert everytime the oscillator prints a major buy/sell, then the candle has touched the predictive ranges?
You'd need to configure the ranges one manually but there are built in alerts for the oscillator
@empty solar Hi there! I'm new to Lux Algo. Can you briefly explain a little more about the candle coloring? Do RED candles mean bearish sentiment or bullish for GREEN?
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Our docs can help most questions ๐
BTW, your YouTube videos are great! Thanks ๐
What settings do you use for this? And do you use more indicators?
Does Lux Algo provide any type of indicator that allows to see Shorts vs Longs and OI? - I'm looking for something that I can use to understand where money is flowing.
Not currently I'm afraid
What settings do you use for this? And do you use more indicators?
@final socket I use Autopilot Long term settings. I make analysis at higher tf and look at 5 min or 1 min for entry
I can't find the Lux Metrics Premium indicator. Can you give a link?
Hi guys this signals open an initial@candle or entry@in the next candle ?
I wrote a short python script to help visualize the raw optibot dumps for each day. This can be very useful for getting a sense of intuition of how to adjust sensitivity/agility settings for different time frames. Here it is if anyone wants it. Works for any any category, not just crypto.
it's renamed Lux Statistics
@empty solar Hi there! I was watching your RSI video, which is excellent btw, but then I had a video idea. Can you do a video using the Pattern Detection feature within a strategy? Thx
@empty solar or anyone else, is there a way to change the color of the trend tracer or trend catcher lines so that it's easier to tell them apart? Thanks! I didn't see an option in the visibility tab after a quick look.
You can change their plot color from the style settings.
On bar close.
Thanks brother ๐ช
And one more please exist period I change on indicator or is standard?
Are you referring to the settings ? You can change them in order to have signals reflecting the price variations you want to trade. See https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
The pivot oscillator in the lux statistics is especially made for that, other options include predictive ranges, reversal zones, and contrarian signals.
My Alerts keeps getting calculation error. First the more advanced but now also the most simple ones (like confirmation buy/sell). Now only my Trading View alerts are working. Anyone else have the same issues?
When you set the alert ensure SR modes are disabled
Okay, can I add SR after?
You can ๐
Thanks and thank you for excellent customer support ๐
I mean if exist period like something other indicators on mt4
Hello all - LUX Algo is not showing up for any symbols in Trading view. However lower indicators are fine. Is anyone facing the same issue?
Do you have a SS?
You mean the signal sensitivity ?
A screenshot
HI EVERYONE..CAN ANYONE TELL THE SETTINGS FOR BANK NIFTY INDEX IN 5 MIN TF?
see NSEI in the #919311293041758298 indices
ty for quick reply..
Hi Experts/Admin - One question on Optimal sensitivity that displays on the dashboard for a stock ticker for a chart time frame
will this value keep changing every day or it remains ?
it is indeed subject to change if the algorithm find a better sensitivity value.
@analog onyx - Got it , thanks for the quick response. Have a great day
Hi I am new,
Can someone please let me know the signals sensitivity and agility for gold. Thanks
Welcome ๐ See XAU/USD in the optibot channels
#797529919499272224 for example
Hello, I love
Trendlines with Breaks [LUX] - New indicator! ๐ ๐ฅ
Just out of curiosity, is it based on Point and Figures trend lines calculations and if yes is that ATR based or traditional? Thanks
The indicator is based on pivots, and is not related to P&F ๐
Hi.
I started using Lux algo premium recently. I want to export buy/sell strong signals to a messaging app or make an alert for it to get notified>
Is there any way to receive signals from TradingView?
Thank you!
Thanks ๐
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
Thank you. The main problem is that I don't see Lux Algo among the conditions!
try refreshing the page ๐
hey guys, is it possible to edit my lux algo colours in tradingview?
It is in the style tab ๐
oh, in tv?
Indeeed
oh just like regular indicators. I got it man thanks
Hi guys. Just a question. How do you validate a buy/sell signal ?
wait for candle close
I mean there are times you get a sell signal then a buy signal with just 5 candles in between. How do you confirm the signal ? Like candle pattern or indicators ?
How do you know which signal to take
I use a mix of both
Tia
play with timeframes, mate.
signals will always be mixed
Contrarian go against a trend confirmation as classical trend following signals; https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals
Type Of Signals - Confirmation - Contrarian - Display
Thank you. Ill experiment a bit. Cant really find anything concrete .
@empty solar thanks
contrarian signals can be better used as exit signals rather than entries
it's tricky to play against the trend when choosing entry points ๐
but it's a good indicator to exit deals
Does anyone know how i can connect binance to tradingview
What do you mean by "connect"? Binance does feed their exchange data into TV.
ayone having issues with pattern recognition? doest seem to do anything when I click the setting
or am I missing something
nothing happen when you enable the feature from the SR mode? Make sure you are not enabling the toggle in "Any alert() function call", thats not how you enable it.
What up yal how do I get access to indices signals with algo
what is SR mode?
Just add the lux Algo premium indicator to your chart and you will see the signals :)
It's a drop down menu in the settings in the main indicator
Here
I have the lux algo premium on my chart I see the strong buy and sell signals. I am talking about signals in the discord.
got it
You can enable them from #๐scanners-premium
Ok thank you the chat says read only
Ok I see it thank you
Do I purchase nitro package to get access ?
no, no need for nitro ๐
Just react with the corresponding reaction
Which settings do you use for the Oscillator.
And the Lux metrics script is not possible or renamed?
Settings for the oscillator depends on your trading style ๐ The lux metrics has been renamed to "Lux Statistics"
Thank you I found it โบ๏ธ
I wanna trade shorter terms on Cryptos. Which settings are recommended for that ?
I tried to trade with disabled lux and lost some money. The lux said allways the right things. From now I will allways hold the algorithm in my eyes ๐
Default settings can be considered appropriate for shorter term price variations, it of course also depends on the time frame you are using. Try adjusting the setting until you find that the oscillator reflect the price variations you want to trade.
Make sure to have a proper trader profile and money management system set up, Lux can help you add some direction in your trading, but those two things are the basics for resilient trading.
Thank you alot.
This scanner is pretty accurate. I like that it calls out signals for the higher time frames.
G'day Lux Algo team - A request , will there be any option to enable " Predictive ranges & Auto trendlines " in S/R. Currently it has option to enable only one S/R options at a time
i mean an option to choose more than one S/R drop down options
Due to plot limits we can't really do this currently; your best approach for now is loading up 2 lux algos
@empty solar - Got it ,make sense . Thank you for the approach . Have a great weekend
Iโm probably just missing it but I would be interested in regular videos showing the real time application of Lux Algo. Most of us are novice to intermediate skilled traders and seeing strategies in action would go a long way to help educate the group
Like example trading?
Yes. I do watch a YT channel called online trading strategies and they go over some strategies but since Lux algo is such a superior product I think that trading example videos would be well appreciated here
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
๐๐
What up yโall I am trying to set alerts for strong buy and sell signals. Should I set it for per bar close or per minute. Which one is best out of the 4 options?
I do per min but itโs up to you
My alerts are being stopped due to calculation errors. I have S/R Mode set to none. When will this issue be resolved? I see other users are having the same issue.
i have the same issue pleas help
how
React to the corresponding reaction.
It's already resolved you just need to set the alert without SR modes emabled ๐
See above
Once per bar close is recommended
Anyone from Sydney?
ahhh i see thank you!
so is it okay to have reversal and trend tracer on?
It will be ๐
Ups donโt understand how can it be resolved if I have to leave out sr settings? That would be a not so nice workaround. I have currently 90 alerts with sr mode enabled what to do? Donโt see that many calc errors though
If you don't see the errors it's ok but the alert just needs to be set with SR disabled; then you can use SR normally
It's mainly breakout zones
I use mostly predictive ranges - have to see. Opening 90 charts turning off sr resetting alert and then turn on sr again is not something I would like to do. Would alert need to be deleted first?
Refresh the page ๐
oh lol thanks
Ok thanks
Hi, how to get notified for buy or sell indicators?
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
Last indicator wonโt work
Last indicator?
Volume footprint
Got it thank you
Who else got paid today? ๐๐ฐ๐ฏ
nybdy here frm india??
Click Manage Account here: https://luxalgo.com
Or email support@luxalgo.com and our team will assist you with any request the same day.
me
frm??
where can i see dashboard?
@hidden moss I jsut recently subscribe but i cant see Lux Algo in my invite only transcript. thanks
Yes
Bottom right of the chart.
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Hi im newbie here. I want to know how you trading set up in binance future if you are using 2hrs time frame
Do u use 10x? For longtime trade? Or spot trading only
Hi there, before when switching off autopilot confirmation signal I got on the dashboard a number to put the signal sensitivity manually. Is this still the case? Thanks!
if you new to all of this, better start with spot trading, mate. get to know the market first.
otherwise you might end up liquidated by midnight (if Fed's will bring us bad news later on)
๐ for good news ๐
Thank u bro.
Below you'll find a list of assets our Discord Market Scanners cover.
(Timeframes include: 2H, 4H, 1D, 1W on each asset with standard Lux Algo V4 settings)
STOCKS:
FB, AMZN, AAPL, NFLX, GOOGL, TSLA, BA, DAL, AAL, LUV, UAL, ROKU, AMD, NVDA, CMG, SHOP, RCL, CCL, NCLH, SQ, ZM, MA, V, SPCE, SNAP, MSFT, BABA, QQQ
FOREX:
GBP/USD, EUR/USD, USD/JPY, USD/CHF, AUD/USD,
USD/CAD, NZD/USD GBP/CAD, GBP/JPY, GBP/CHF,
EUR/GBP, EUR/JPY, EUR/AUD, AUD/CAD, AUD/JPY, AUD/CHF
NZD/CAD, EUR/NZD, USD/ZAR, EUR/ZAR, GBP/ZAR
CRYPTO:
BTC/USD, ETH/USD, XRP/USD, BCH/USD, LTC/USD, BNB/USD, EOS/USD, XTZ/USD, LINK/USD, UNI/USD, YFI/USDT, DOT/USD, ATOM/USD, ADA/USD, OMG/USD, ETH/BTC
INDEX:
SPX, DJI, IXIC, E100, CAC40, DAX
FUTURES
ES1!, NQ1!, GC1!, BANKNIFTY1!, BTC1!, NIFTY1!. YM1!, SI1!, ZN1!, CL1!, ZF1!, 6E1!, ZB1!, 6J1!, RTY1!
COMMODITIES:
XAUUSD, XAGUSD, XPTUSD, USOIL, SUGARUSD, ZR1!, ZW1!
Hello new anyone here to help
I can
Im a student in trading, anyone can i advice me what is the better broker or exchange i will start to. Crypto, forex or stocks?
Binance, Kucoin, FTX, Or Coinbase
Depends on what type of trades: margin? nfts? pooling capabilites? staking? I think for crypto Binance US/BInance depending on your location is best, kucoin is also great
I can't send a message in the #๐คsupport channel. It says that I don't have the rights for it. Used to be able to do that....
Hi guys. new to luxalgo. got recommended by a friend. lets test this out
Same here, lets give it a go
๐ค let us know if you guys have any questions!! @feral bronze @abstract badge
good day. enjoying the system. does the Lux Algo generate Fib levels?
Welcome ๐
It won't no; we'd never add something in that you can get for free elsewhere; that's built into tradingview ๐
thx
is the any voice chat channels I can join?
Anyone combine lux algo with Japanese candle?
Or does it works with Japanese candle stick?
i also got recommended by a friend, he is good trader tho
There is VIP chat ๐
i think lux algo is crashing chart not loading correctly. isnt ?
Which features are you using? ๐
its main plugin algo lux premium was disappearing now its back
reversal and buy sell
It's working now?
can we use lux algo for webull or is it strictly for trading view ? @empty solar
Strictly TV for the moment
ok thanks
hopefully you guys get it on other platforms in the near future
thank you though
https://www.tradingview.com/x/QXIlE8uQ/ Job not Done! 2 TP HIT!
Hi, see our documentation to learn every aspect of the premium indicators https://docs.luxalgo.com/
Learn how every aspect of our product suite works & get useful information about technical analysis.
Does anyone have bug on lux algo
The candles not showing the proper color and the buy and sell indicator not showing if the market is pumping and dumping
Even its dumping hard it only shows green and blue color only
I lose the opportunity because of this
yesterday i also faced some issue while market was pumping
sometimes it shows buy and sell signal late i think we should use 15 min chart to find the trennd
This is the problem i faced yesterday. It make me confused if my analysis is correct
Even its dumping and pumping its not changing colors
Alll green i see
yes
How about now? Its working properly?
Im doing 5min time frame because im scalping. I lost yesterday because of that
๐ฉ ๐ฉ 5๏ธโฃ
@runic tulip do you have a screenshot of what issue you are talking about? Not sure what you mean by candles not changing colors. Also, the buy/sell signals are lagging indicators/confirmations. If a big candle shows it doesnt necessarily mean a buy or sell signal will appear
Hi there, just wondering if it is possible to change the colors of the advanced oscillator premium (not too visible in dark mode)? Thanks
The fill itself not currently I'm afraid but you can change the plot outline in the style tab ๐
Ok thanks ๐
What should I get on Coinbase for $10
you said this on the 26 jan also!
Thanks bro.
Guys can i ask if it is necessary to change the agility if you change the sensitivity?
what other indicators that you guys use with Lux Algo? I am more into scalping.
It's not ๐
Hey guys whatโs the best short term time frame to trade crypto? Like should I be using 5/01/15/30 min? I want to be able to do couple of trades maybe in a day. I have been trying the script on past data and canโt seem to find a perfect setting.
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Would personally not recommend lower timeframes or anything sub 15m if you don't have past successes on LTF
from my observations these past few weeks, trading on lower timeframes in this type of market (dominated by fear and uncertainty, where technical analysis has become obsolete, any news that people understood as bad turn everything into a selloff) is not only risky, but most of the indicators and even your thoroughly tested strategies can and will only deceive you. because this is not a normal market, where for example Fibonacci retracement or trendlines are accurate most of the times.
correct
and it's not just the bearish trend, but it's the opportunities that came with it for the whales, where money can dictate everything. we have now the perfect scenario for manipulative trading. unfortunately, it's not for us to do it, as we will never have the available funds
also, look at the stocks market and any other assets investors would be attracted to. that should answer the question about 5 to 30 min timeframes ๐
on the other hand, lucky guesses and chance can indeed bring you considerable gains when BTC price stays in a range. problems with ranges is that, especially now, they can go either way (up or down) in a second.
How do I get the new feature added? I just updated my luxalgo so now it does show 4.4 but donโt see the new trend projection anywhere
It's under S/R mode ๐
Thank you so much and this is why i didnโt mind buying the highest package you all so damn helpful
One last question when setting up the sensitivity and agility is there a way to save them to each cryptoโฆIโm noticing if I set it for bitcoin then switch to my eth chartโฆit has what I just put for bitcoin and viceversa
@empty solar quick question, for candle setting (confirmation simple), why sometimes green candle will be covered by RED outline.. it is so confused. what does that mean???
Sadly not unless using indicator templates ๐ฆ
That's just the candle color, you can right click, hide borders in settings
๐ thanks much better
is it posible to add alarms for nadaraya-watson estimator?
Is there any coupon codes available?
Currently not I'm afraid
Hi @fervent crescent! Click Manage Account here: https://luxalgo.com/
Or email support@luxalgo.com and our team will assist you with any request the same day.
Hello is there any one can help me?
I already subscribed to LUX-ALGO and connected to the trading view. Only issue is that I don't see the invite-only scripts folder or the Lux Algo Premium indicators. I tried refreshing my browser but no result.
i have sent an email to their support but no response since 2 days.
Correct
USERNAME: marberlas92
I don't see this account as being connected
Could you share a screenshot of your connect accounts page?
You see there
"you are registered as Marber"
You connected the username Marber
Could I see a screenshot of the email you sent to support?
but when i click follow or main guide then it directly directs me to trading view account.
And I made account with same email ID
here is the email that I send.
Odd; ok what's your email address?
yeah. on trading view I did not set any username. It automatically mentioned different username.
i did not make trading view account separatley. i made account trading view account for the first time through connect page
i made trading view account thorugh LUXALGO connect page. and while making trading view account they asked me my email ID to make an account so I put the same email ID then trading view account automatically set my username which is different.
here is my TV account which I made thorugh LUXALGO connect page
Perfect
What's your email address so I can give support a nudge
Perfect will get this sorted
same Email id for both TV & Luxalgo account
how much time it would required to sort it out?
As its already been 2 days since i bought the subscription.
how much time it would required to sort it out?
As its already been 2 days since i bought the subscription.
A few hours maximum; support needs to manually change that username over
When it's done I'll @ you โบ๏ธ
thank you so much for prompt response.
@empty solar is there any update about my case?
Just double checking status now for you; it should be working
Ummmm the contrarian signals are amaze for scalping
They are definately underrated ๐
I'm going to start emailing you random things now
Is it better to leave extended hours off or does it help to have the extra data to chart with?
if you trade after hours session you should keep it on
Hi! how long does it take for the indicator to appear on tradingview?
@unique plaza
@unique plaza
@unique plaza
@unique plaza
@unique plaza
Outspoken in his interest in cryptocurrency since 2017, Simmons last February confirmed in tweets that he owned Ripple and Dogecoin, as well as several thousand US dollars' worth of Ethereum, Binance Coin and Cardano....Full Article
@empty solar I can't seem to find forex signal channel
Thank you
Question, what does the 'X' indicate on the Lux algo?
The X are exit signals ๐
Ahhh makes sense haha
Is there a way to make the sensitivity more specifically for those? as I see this it is not very consistent
They are quite finely calculated so there's not really a way to shift them gradually like signals
A change in sensitivity may cause the exit signal to totally recalculate
morning people. on a funny note, do Cardano holders see anything but SELL signals? asking for a friend ๐
Anyone know what news is Europe making the markets sell off the last 2 hours?
I have not found anything significant
German Bonds Fail, and England banks telling people not to ask for raises
@empty solar there's someone pretending to be you on Instagram. Please check your insta dm. Thanks
Ah will check now
Hello everyone โค๏ธ is there anyway that we can make the activation faster than 6 hours? ๐
@empty solar Hey after our talk yesterday decided to join bro โค๏ธ
i have done it but i dont see it on tradingview it has an exclamation mar next to it
Oh its fixed okay โค๏ธ
Is there anyone that has 5 minutes to explain me some stuff on the voice channel ?
there is no update on OPTibot today?
Ah he needs a zap
Learn how every aspect of our product suite works & get useful information about technical analysis.
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
when you guys set up alert, do you count those pre/after market on too? or not
Guys? Dose anyone know any indicator that makes patterns more visible? Like M , W , H ect? @empty solar
Lux Pattern Detection. In settings.
@urban mirage
Hi, I currently have TradingView premium plan with the 30 days free trial,
If I downgrade to the pro+ does anyone know if Iโll still be able to use the invite-only scripts option?
Sweet, thank you!
hello is there any telegram group for luxalgo? thanks
We don't have on I'm afraid
ahh i see thanks
does the bot only work in the room now?
It works in all rooms ๐
It's just you tried to get the sentiment for "btc"
It'd need to be "btcusd"
the ticker pair
with the base
yup got that part.. i was just reading over the guides and wanted to test without spamming any channels and remembered when I first signed up that I could msg it directly and it responded but now it doesn't seem to respond
You can't DM it currently it'll need to all be done in here
@sour mesa ERROR: Unsupported symbol argument (Make sure to separate base and quote currencies with a slash delimiter /, e.g: BTC/USD)
@sour mesa
@sour mesa
@sour mesa
how do i do a backtest strategy using the buy/sell confirmation signals on tradingview?
You cannot as the signals are not part of a strategy
Think he is referring to lux Algo
As was I ๐
The confirmation signals aren't part of a strategy
But he is right you can
Ye I know but he is referring to alerts as signal
Nor are the signals part of a strategy by default; there are no entries and no set exits and no filtering
We don't provide that
shushu, mate, you talking to the guy creating this system. pretty sure he knows better lol
Hahaha for sure
So yes there are filters we provide and yes there are exits
Lux is a tool, use it smart and it's better than any backtesting strategies
But a strategy isn't built out and set in stone for you to follow
Will see after tonight but so far great after adjusting few parameters
๐ซ๐ซ
p.s. on the other hand, because it's a tool, you should wait patiently for multiple confirmations before entering deals. weekend not always a good place to judge the overall trend ๐
Depends on how you adjust , on what time frame and with what other tools u combined ๐
Looking forward for more premium products
๐๐ผ๐ซ
Thanks for the response guys, I guess the closest I could find is the โ/backtestโ command
Lol
Hi everyone, on what timeframes do you switch between short mid and long term autopilot frequency?
i have the same questions haha
The frequency and timeframes aren't really correlated it just adjusts how sensitive the signals are to price variations
it seems the accuracy depends on the frequency, for me..15 time frame work better with "short term" but it seems a little aggressive..
Why do I keep getting this
I have no idea really; maybe your discord is a little bugged?
Deleted and reinstalled seems to have fixed the problem๐
how to set alert for mcdonalds indicator
You cannot currently I'm afraid
oh ok,thanks, be glad when that happens, i like that mcdonald indicator
Has anyone tried luxalgo on crypto vs forex. How was the results?
Just closed out a 155% position on crypto. Works pretty well on the higher timeframes (1 hour ect.). Got to be careful with margin though. Leave plenty of room.
What settings you using ?
Hi. is it possible to have sensitivity and agility settings saved for each chart? Right now I have to change settings every time I switch charts for example from BTC to ETH etc...
Any news about the custom indicator scanners?
You could use indicator templates built into TV ๐
Not yet as soon as we get update will let you know
Thank you. I'll try it. I am new to TV ๐
hi does anyone use lux for us30nor nas
I use the Optibot 15min and 30min for direction and a 3 min on auto for entry. I have alarts setup so I do not have to sit around waiting for a good setup on the 15min.
๐๐ผ
hi! i saw the announce about the lifetime deal and bought.. never tried before, but i've been seeing the free indicators quality, so the premium must be really good right?
Welcome :) We definitely try to keep the quality of the premium tools to a maximum, this also includes the tools you can find in this server such as optibot and luxbot.
Please let us know if you have any questions or suggestions
i think i got it.. i thought it was really a bot to install or something ^^
so the bot says recomended settings to the indicator.. ok..
hello!
Sir may I ask what is the means of โ3min on auto for entry ?
what methods do you use for finding the best settings: optibot, autopilot or manual?
i think he meant using a 3 mins chart based on autopilot settings
What up I am trying to figure out the reversal zone cloud fully. I know price rejects off of it but Iโm trying to figure out how to read it when it changes size.
What exactly do you mean by change in size? Do you have a screenshot of an example?
Getting ready to short BTC. 30 min. chart - Sell symbol (at settings 14,26) which we haven't had since Feb. 3rd, red trend catcher on the verge of crossing trend tracer to the downside, purple candles indicating that the uptrend is exhausted, downward crossover on the advanced oscillator (at 17 length), and price has broken out of linear regression channel. Looks like she's going down. Hey, if I'm wrong, at least I did my due diligence. ๐ I hope it's not a bear trap.
I notice sometimes the cloud gets thick and sometimes itโs thinner. Iโm trying to figure out does this means support or resistance is stronger or weaker depending on the size
On the daily chart we are getting a red candle
a thicker cloud would tend to appear after a volatile move; I wouldn't say it has a relation to how strong the support is really. It's just the zone moving with the price action ๐
you meant a bull trap ๐
I did mean bull trap. But hey, I hadn't had my coffee yet. ๐
well, coffee or no coffee, selling was on and it still is ๐ so you were right. long positions like ours need now the $43K to hold as support
I think you'll hit it. I'm shorting at the moment, but I don't know - I don't see a long-term downtrend - I think she's just taking a breath.
Bounce at 43?
yeah, same here. somebody needs to cash in
Yup
Ok thanks
shorting gala at the moment, but im afraid that it is what everyone is thinking it going to do and its just going to do the opposite ๐ crypto you got to love it!
Luxbot? I see the optibots but not sure what luxbot is?
LuxBot is a practical Discord bot allowing users to display charts, get news, and even perform backtests by using simple slash commands.
thank you!
I bought the Lux-Algo and don;t know how to use it
Any video links for detailed usage for stocks?
that's why they have an extensive documentation to check first
need the link?
cause otherwise is too much to explain
So it's more of a text document and not a detailed video?
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Connected to trading view
some links will eventually send you to the YTB channel, but if you want to understand it properly, reading the documentation can only be helpful
i consider reading any documentation as a first step in familiarizing myself with the terms used
Thanks man
yw
explain "live trading" ๐
Discussion of Scrips, Entry exit Setups
Ok thanks!
Lol
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
some example strats here may help ๐
How to change colors on candles
Hi guys, just joined premium. Looking forward to learning and earning
and hopefully, will recover my losses
In the settings candle colouring ๐
Welcome ๐
Hey gecko! can you help me out real quick pls
how do i set my candles to looks like these one
ive got them like this :
Oh you've got your borders on ๐
Right click chart
settings
Symbol
And untick borders
oh perfect man! Appreciate it
from a fast analysis (visual inspection) point of view, the charts, as you have them now, are telling you more information than the way you want them to be, which is less visual information
the intensity of the colour tells you something ๐
have a look at the docs, you will understand more about Lux. just making all chart green or red not that helpful, mate
thank you man, its just specifically for his chart its much easier on the eye to spot patterns if its only 2 colours
do you have an example of what. you have set up for smaler time frames?
smaller*
Just got my subscription, i hope this won't let me down :D
Does anyone know how to get lux algo indicators on spookyswap?
they use chart by tradingview
@empty solar is it doable?
U canโt they have TradingView UI
Hi! Is there an divergence indicator
The lux oscillator toolkit regroup oscillators able to show divergences, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-oscillator-premium
Features
Dose it show good on 3min timeframe?
It'll work on all timeframes but we don't normally recommend low timeframes like that
Can you send me a screenshot of 3min timeframe og the lux divergence? Off the NQH2022? ๐๐ pm me
Same Iโd like to see how this works
You both have access to Lux Oscillator no?
hii can anyone suggest me what is the perfect set up for my LuxAlgo indicators?
i just started today.
and im kinda like doing day trading/scalping coz i have a lot of time being with my pc.
help me pleasee ๐
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
oww thankyou so much
is there anyway to have your alerts sent to you via text
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
When you set custom alerts there is a field for "Notify on app"
Which is close
Or you can be emailed
And there is also a send email to SMS
Thanks
Can I have more than one pair open ?or I can have in more pairs deferent charts pairs ?thanks
You can using a split screen
lux algo feels too overpowered to me. its like were having huge advantage over most people. anyone feel me?
๐ค
Bit of a pickle for me, my forgotten limit order for btc short kicked in last Friday at 38200k just before the pump. Now been riding that position since the which is now at -14k usdt 5x leverage, size 89399 usdt ay ideas on what to do, as i'm soon approaching liquidation on the position in isolation mode?
@empty solar @analog onyx Hello Gecko/alex , I was just wondering is it possible to set an alert on the lux oscillator premium ( legacy) for overbought and over sold? i have listened your video but i did'nt find nothing for this one. Thanks in advance
Like so for overbought ๐
And for oversold 25
Crossing down and up can also be used
thanks !
Hey is there a way to generate TradingView alerts with the lux algo ? I canโt set the alerts , thereโs no option for that
I wanna generate an alert every trine the indicator says buy strong sell strong
Refresh the page ๐
Doesnโt work. Already closed my browser and reloaded the page
The option is disabled on both Lux algo and lux oscillator
Log out then in again ๐ A refresh really should work
Or try re-adding and refresh
Gonna clean the whole browser and log into trading view again
Again the same result
What can I do ?
I'd suggest trying later today this is very very odd
I'm IN! Hello all.
Welcome ๐
i'm new here, does anyone know what's the blue and red X mean?
Those are exit signals
blue X = longs exit, and red X = shorts exit?
Correct ๐
thanks
Just joined - super stoked to learn and grow!!
Welcome ๐ค
Any good trades?
I got some alert yesterday about Biden talking to Putin. It came from this group but I didn't click it. Is there a way to see a history of these notifications? I don't even see a section with a message about it.
Maybe forex news?
it was in the channel, mate, recently
but Internet is flooded with the same news, more updated than the one above
thanks, that was really impressive imo
the Biden call news was at like 12:40 or so
pretty fast compared to many other news sources
the only thing about this crisis that we know for sure is that ... we know nothing for sure ๐
highly increased propaganda on both sides, conflicting news, etc, etc
the only one who doesn't give a flying frack to the whole situation is our Boris, he too busy licking his wounds from the Covid garden parties lmao
isn't it economic suicide for Russia to invade though?
even if they can make some deals with China etc. how is that really worth it for them?
apprantly their access to oil will get rekt
it already is. Russian stock market has been hit like 20% becouse of this nonsence and foreign investors are withrawing all investments from russia whatever the losses.
I think whoever is in power in there knows that markets crashes and doesnt care. That i worry the most.
This might be also the way leaving Russian forces to Belarus near EU/NATO border after this biggest rally of troops since ww2.
hey. I just tried to activate the indicator but it gives me an error code. Can someone help me please?
Hi there
If you've connected your account you should have access so try refreshing the page ๐ค
All good ๐ค
Excuse have notifications with email or something other in phone thanks a lot
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
And have only for buy or sell? Both not exist ?
Both exist ๐
Not I create good?
In the list not i see for this ask
All good ๐
Any confirmation
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
Of course I see this and I send the list with both buy and sell and I see exist only buy or sell not both
You aren't clicking the correct option
Condition: Lux Algo
Then in the box below
click
If you set it to yes ๐
Good morning
How I can in the alert coming only if exist the arrow ? Because coming alert but not exist the arrow and the arrow coming after one hour โฆ how I can inside the right settings but for the both arrows sell@and buy thanks a lot
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
Inside the code in the window price close ??this do you mean ?
Need multiple entries, please try to bring in next update, i always exit fast asf lol
Hey guys! I just made a Lux Algo video would love some feedback if that's allowed? https://youtu.be/eJvupMkGcMA
Is Lux Algo worth it? I will be posting my results every single week using only Lux Algo to determine wether to enter or exit a trade! I wouldnโt normally recommend this as I believe you should always do your own analysis but Lux Algo has really surprised me!
Get Lux Algo: https://bit.ly/2OMNo2t
Save 20% with code SB20
Join the trading communi...
Help me to find best settings
No matter the numbers i input always get late signals when backtesting above 3 or more days
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
Confirmation signals aren't designed to be early or leading ๐
They are for confirmation
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
Ok
Hi all, what chop / range filter can you recommend, without filtering out the big swings? The swings the indicator catches are great, but the chop can be nasty.
ADX is a classic ๐ Or use dashboard market state or Lux Volatility
How can I find lux volatility
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
Can we have exit signals on all instead of selected few?
Thanks. I've tried ADX but I'm using bots and then often it misses the big swings
On all what? ๐
I'm talking on the signals generated by lux algo premium. When we have a buy signal sometimes it indicates when to exit and sometimes it doesn't
Oh you cannot have it on everything its only if a condition is met
This cannot be forced sadly
Ok, can I set alerts on the market state? Or I can avoid ranging markets? Or is there anyway to avoid ranging markets
What do the โxโ on charts mean
Learn about every aspect of Lux Algo at: https://docs.luxalgo.com
Learn how every aspect of our product suite works & get useful information about technical analysis.
There are exits?
New Member: To learn how to use indicators rules or suggestions, for example using the cloud and not taking a trade while price is in the middle of the cloud, where can I find such details about the indicators? Like trend catcher, cloud, predictive ranges, etc. Thanks.
@empty solar New Member: To learn how to use indicators rules or suggestions, for example using the cloud and not taking a trade while price is in the middle of the cloud, where can I find such details about the indicators? Like trend catcher, cloud, predictive ranges, etc. Thanks.
You can learn everything about each features and more in our documentation page https://docs.luxalgo.com/ :)
Learn how every aspect of our product suite works & get useful information about technical analysis.
Any good sensitivity/agility setting on 1 min for SPX? I only see 5 mins at least
We wouldn't provide that as we don't recommend anything below 15m let alone the 1m really
Its there any video that explain the settings for the predictive ranges..thanks I use the 15 charts most of the time...or is it best to apply to the higher timeframe like 4 hr and enter off the 15...atill new to lux...thanks!!
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
This playlist had some nice videos with the ranges being used ๐
In general you want higher timeframes
Thanks!
What up I see the trend projection is a new added feature. What time frame would suggest using it on ?
The timeframe of your choosing really ๐๐
๐ok
I am ๐
I am not at all a fan of this area if I'm honest ๐
Patterns I like
Harmonics and fib not too much
It is a magical thing that's for sure ๐ magic enough to move markets... Maybe
In this series of chart patterns, we have taken a look at the more traditional ones. However, we have not yet discussed harmonic patterns.
Harmonic patterns form a part of the numerous chart patterns available for the identification of reversal points. The practice of trading using harmonic patterns is often defined as "Harmonic Trading".
We ...
We cover it a lil here
If I have the trading view window open on my PC. Do the alerts not alert you of the signals?
Alerts will still work ๐
Then I have done something wrong. The alerts are not going off.
!alerts
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
Follow this guide for setting up your own custom alerts on TradingView.
^ This should help ๐
Unfortunately, it does not. I follow all the directions and the alerts aren't working.
Those?
Copy that. Thanks! I did that and will wait for the next signal.
Is there a LuxAlgo indicator that rivals the MACD?
Should have said comparable with the same info. Rival is what came to mind at the time. LOL.
Ah maybe our classic osci ๐
I like it but wish it had more info. Thanks, though. I like the signal lines on the MACD. Just something to think about if it can be added to the classic.
There's soooo much on that and I can't make the connections on the MACD that I like so much. I may just need more time studying the advanced but when I look at it, I get anxiety. LMAO.
I want to combine the classic and legacy. Is that an option? Can it be?
LOL.
Wait. How do you drag them on top of each other?
By dragging ๐
OMFG!!!! I just learned something new, hot damn!
Wait, now it's saying the maximum # of studies per chart has been reached and it's not loading.
If you have TV free only 3 at a time
How can I reset it?
I have and every time I try to re-add it, it shows the same error.
May I see?
I did. I even cleared all the indicators on the chart with the right click option.
What's the error when you hover?
The maximum number of
If i choose that option it should remove all indicators, yes?
It will ๐
I've done it once and going to try again.
Git it situated. Had to Shift+F5.
Thanks for the help.
Hello, can u guys include trends catcher and trend tracer to the one alert system
It will be convient for those that use trading view for free
Also, if u can add it to discord bots it will help alot
Trend catcher and tracer aren't here
If they are, pls reply
I have a maximum of 2 alerts for free tradingview and it won't be enough to manually pick both tracer and catcher? Do u understand ๐
We understand there's a bit of a reasonable limit we have to place
Otherwise that section will be a massive massive massive list
I think it should be added, it will help those that can't pay tradingview fees
Will u do it?
I really need it ASAP ๐ซ
We can consider it ๐
Yesssss
U can release a custom version and send it to me, lol. I don't mind.
๐ค
When can I expect it, I need it for my strategy ๐ฅฒ
??
If we do it wouldn't be for a little while but again I can't guarantee we'd add that. It's not really something that anyones brought up before
TV's lowest plan has a few alerts
Please do thanks ๐
Or better still add it as a discord Bot ๐
Is there an optimal S/R Mode - Pattern Detection sensitivity for the 15m or is it completely preference based?
There isn't an optimal SR significance, use the one that allow you to trade the price variations of your choice.
umm did russia just do a false flag to justify an invasion??
Hello everybody! Has anybody done any backtesting to figure out the accuracy of the signals here if left on an automated trading bot?
Would like to know this too...
Same here. I am looking for examples / channel of working trading bot strategies. Iโve seen the Lux YouTube video strategy examples, tried various automated strategies myself and the indicators look very powerful, but did not find a working automated strategy yet.
Automation is a totally different kettle of fish really. It's 10x harder than actually trading which is already hard enough ๐ if you're going to automate I'd suggest a DCA strat
DCA to accumulation is my favourite. It's a win win in a way
You accumulate an asset you want to hold
Which is a win
And you have a strategy that catches the dips on it
No selling, just accumulation
Especially with contrarian signals; chances are youll end up better off
Interesting. I agree that is a strong strategy, best maybe in the long term. Challenge is the volatility of the coins. Challenge with DCA to grow USD is that the profit of 10 winning trades with just the base order or one safety order can be whiped out with 1 trade that catched 4 safety trades (large deal volume) and still continues to move in the wrong direction (no bottom, other than to wait it out)
Are there recommended auto pilot frequency settings for certain time frame?
A frequency and timeframe aren't really correlated it's more your trading style and how you use the signals ๐
What are the short-term, mid-term and long-term measuring?
Hello, I'm new.
Welcome :)
hi is there a way to make the small table color change on the lux algo premium? cant find where to change the color
That can't be changed for now I'm afraid
Hello house please i need help with the simple Trading strategy video by Gecko Trading. my issue is with the LUX OSCILLATOR 3.1 was used but now we have Lux Osc 4.1 i need help with the setting.
The settings would be the same ๐
thank you, on the new Osc 4.1 i have LINE and Cloud which one of the two do I follow line or cloud?
You'd want the line
thank you
alright thanks. will submit a suggestion feedback
another question is the autopilot thing = optibot?
It doesn't nope
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
This page explains the options there
Hey, I'm just set up good using Lux Algo on Trading View. Which of the trading brokers that are linked in to Trading View are the best? Just simple stocks and some crypto. Free trades are preferred. Would like to use one that is linked to Trading View to keep it all on one page when trading. Thank you
pretty sure this channel is not for advertising brokers, mate ๐ but some may have connections. just bear in mind the type of question you asked will put you in front line for PMs and potential scammers. be careful ๐
Got it. Was just wondering what people preferred. Will explore them all and figure it out. Thank you
hi, how can we set alert for algo-trade on McDonald's Pattern ?
I onlyg get crossing option in TW guys
"Top" "Botton" yet it says crossing and some
You can't really set alerts on it
Tis a mcdonalds logo on a chart
It's not real time
๐
oky sory to bother ๐๐ป ๐
No worries ๐
is there any one help me which is best for Crypto day trading setup for me help thanks i just joined premium
hello
Hi there ๐
!strategies
Find our full trading strategies playlist on YouTube: https://www.youtube.com/watch?v=xezy6WGpZ8Y&list=PLbqCXsOfrM3MjO7q7uIiwoVq3evI4neQr
New: How to find the best settings: https://www.youtube.com/watch?v=wkruvBBeXn8&t
Usability Tips: https://www.youtube.com/watch?v=5wtdY51crnc
Get instant access to use on any chart: https://luxalgo.com
Any good settings of sensitivity and agility for Nifty & Bank NIFTY pls guide for 15m, 30m &45m timeframe
!settings
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
This page showcases every way users can adjust settings along with full explanations of how they differentiate from each other.
How to find optimal settings for sensitivity and agility for Nifty optibot15m i tried but couldn't find one can you please help @empty solar
We have manually put the inputs from optibot to the indicator right
Yep ๐
can someone help me with one query
what is the Ghost logo in this new indicator Pivot Points High Low & Missed Reversals [LUX]
The description of the script always tells you all the info on how to use it ๐
And what everything means
"Missed reversals are highlighted by labels with a ghost emoji, a Zig-Zag line connecting a missed reversal is dashed. Note that labels are offset by -Pivot Length bars (with the exception of the most recent one), and as such are detected further ahead of their location. "
sorry i'm quite new to all this so was just learning stuff
Before i bought the Algo i was using the livestream in youtube. What are the settings played on ETH ? i did some trades with it and with that cash i bought the algo i would like to know how to set it up for the same. love it till now guys
You can find the settings in the video desc ๐
thanks ๐
just one more query what does missed reversals mean ?
That's basically the role of the script to identify them. They are a term coined by us so there's not really a standard definition however the script description explains their role ๐
Pivot Points High/Low, sometimes referred to as "Bar Count Reversals" allows highlighting market prices local tops and bottoms. This method compares the price value at a certain index within a user-specified window length and tests whether it is the highest ( pivot high) or lowest ( pivot low).
This method can return successive pivots of the same type, thus missing certain reversals, as such, we aimed to highlight those missed reversals and provide a level at their location to determine if they had any significant role to play. A zig-zag is additionally built, connecting regular pivots with missed reversals.
got it sir thank you ๐ @empty solar
i never notice! thank you men! awesome product happy to keep using it and to contribute for more developments
Glad to hear it and our pleasure ๐
Hey I just subscribed do someone can help me pls?
I donโt know how to set up on TradingView
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
^ Here's our setup guide ๐
Do you have a screenshot?
Now itโs working Iโd to sign out and sign in again
hi what does pivot oscillator do and how can it be useful ?thanks
@fast acorn
Returns an Heikin-Ashi chart of a user requested symbol and optional timeframe. If the user don't specify a timeframe or one that isn't supported the 15 minutes timeframe will be used.
User can optionally display technical indicators on the chart, by calling them in the command, see here for more information.
/ha btcusd 15 rsi macd
@fast acorn
@fast acorn
why I got chart for STELLAR instead of SPX?
they should both have the same ticker name, its unfortunate that tradingview doesnt bring sp500 first, using SP:SPX should work
@analog onyx
Would anyone be able to help me understand how the TrendChaser and Catch work in a little more depth? for example, what the trigger from red to green?
Or if thats a little too much IP, just some added context?
Trend tracer follows the current trend price and the catcher is dynamic and predictive.
thanks. was hooping for a little more in depth
Like the calculations used to display the indicators?
admin, quick question. you know the "Pivot Points High Low & Missed Reversal Levels [LUX]" that you guys just issued. I noticed you cannot trigger alerts on that, but it's something I find very useful in order to know when a peak has been reached. can I use those (even if they're painted later, does not matter) to an alert?
p.s. without extra coding in Pine ๐
Currently there aren't any built in alerts for that script however it's a few lines of pine that could be added ๐
if you add those and save me/us the time that would be magic ๐
you probably understand where I'm heading to. ride the bullish/bearish wave and close deal after pivot occurs ๐
no worries, done it. thanks
Ah my bad I didn't click send on my DM to you ๐
I sent you the line to add but you've got it?
that's OK, was pretty basic ๐
Yeah just a single line
alertcondition(ph, title="Pivot HH", message="Pivot HH")
it's the one I need for now ๐
will add LL as well, after a few tests
hi
please allow lux algo premium trading indicator to my tradingview user: RK-Traders (rkunlocker@gmail.com)
hi, can you allow also algo premium indicators to my acc ?
Hi there
Have you connected your account?
i tink so . i wach a lot of videos and moust go to indicatiors, and lux algo premium
i connect by tredingview
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
cant find ( f ) simbol , to go intove only scripts...
itn not on my descop
Do you have a screenshot?
i find, but ist not free
it 10 usd monthli
i need tu buy ?
are it supoustu be free
It's free
I'll guess you just saw the message:
"You cannot have more than 3 indicators added at a time"
And you already have 3
So right click your chart
Remove indicators
and try again
How do i make an alert when price is in the reversal zones?
all done, thenx alot
Does this make it alert when it enters both the red and green reversal zone?
all don thenkyou so much
Hi
Hello!
There are 2 seperate alerts for that
anyone here using alertatron?
Does Lux Algo work fine for the 1D timeframe?
Absolutely ๐
The 1d is a massive massive timeframe it'd end up updating maybe a few times a year
can i ask you ? Admin
it dosnt shou buy are sell signals, where i neet to go tor on ? are what i need tu due ?
!guide
How to setup the indicators on TradingView: https://docs.luxalgo.com/getting-started/setup-tradingview
TradingView.com --> Chart --> Indicators --> Invite-only scripts
Once you've signed up on our website and entered your active TradingView username within the "Connect Accounts" portal from your email, you will have instant access to use our indicators on the platform.
Here's our setup guide ๐ค
Can I see a screenshot of what you see
yes
What's your username on TV
Artiom
I see you should have access
If that's the correct username
Remove Lux
And refresh the page
And readd
cant realy understand, soori, where i need to go tu remuve lux ? and how to tue thet, tnekyou
done
Re add lux
a tree this cupple times
Then I have a feeling your username is Artiom on TradingView