And better movement.
#💬hangout
vale dragon
hidden moss
I am trying to develop a 1 min scalping strategy
Using rsi macd lux with the trend tracer and the support resistance levels
But it is not giving me great results...
Do you guys trade in the minute?
empty solar
Trading the 1m, even the 5m; if you don't have a track record with it it most likely won't end well
Frictional costs will destroy any trades
warped nova
For those wanting to use 1m or 5 m use it to time scalps, look at this AAPL chart. this is 15, 5, and 1minute lining up
the white dotted lines are when the 1 minute started to hit a reversal zone and where price was at with the 15 min. and 5 minute
the 15 minute was hitting up against trend tracer that was still green but trend catcher was red and for the 5 minute price was hitting up against trend tracer that was green a
but price still hitting up against it
so you ask yourself is price likely to continue to go up or reverse down to the 1 minute predictive line
vale dragon
This is why I was asking for those who already trade futures, like the results in the results channel. They already know how to do it right.
hidden moss
so you ask yourself is price likely to continue to go up or reverse down to the ...
Don't quite get it... Could you explain it for dummies please?
maiden marsh
I dont understand this, when i'm watching the weekly the indicators show this:
which to me is bullish on 4h but if i switch to 4h its bearish
its either bullish or bearish ....
this is on 4h
i notice sensitivity is also different
using autopilot
empty solar
This is because they are very different timeframes
The data on the 4h chart and weekly chart are very different
A lower timeframe may be trending downwards whereas a higher can be trending up
maiden marsh
yes i reallize that but the 4h is 4h on both charts , it dont make sense to me to be honest
maiden marsh
i'm not a great TA but i'm just thinking that little view is the quick view of what the also thinks for that timeframe
vale dragon
I have a good question (I think):
If you aren't on auto-pilot should you use the recommended sensitivity in the dashboard or the Optibot? 🤓
maiden marsh
Are you comparing the weekly and 4h?
what do you call the mini view thingy (MFT?) , for that yes i compared the weekly with 4h
empty solar
@vale dragon https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings#choosing-the-right-method
maiden marsh
i'm sure i'm doing it wrong but then again both are giving info on 4h
empty solar
So you're saying the dashboard shows the 4h to be bullish
and when you go to the 4h on your chart; it's bearish?
vale dragon
<@!408995933112500227> https://docs.luxalgo.com/lux-algo-premium-indicators/lux-...
That just says what it is-no mentioned of which would be more accurate I would imagine the dashboard since it's updated Live.
maiden marsh
yes bullish on weekly chart and bearish on 4h chart
empty solar
yes bullish on weekly chart and bearish on 4h chart
Oh yes this is very possible
So just to be clear; you look at the 4h and it's bearish and then look at the weekly it's bullish?
empty solar
That just says what it is-no mentioned of which would be more accurate I would i...
They are different things really; optibot will of course test over more candles and for both sens and agility and updates once a day; the dashboard updates frequently and just optimised for sens
maiden marsh
see the mini thingy on lower right, not sure what to call that 🙂
vale dragon
Dashboard
maiden marsh
yeah the dashboard , thanks 😄
vale dragon
I learn what things are called by unchecking boxes to see what disappears lol
If I recall Optibot is more accurate than auto-pilot? Its just a question if you want to manually update as it does.
maiden marsh
I learn what things are called by unchecking boxes to see what disappears lol
hehe yeah did play with it allot and went default and autopilot, seems to be best for me as i'm not the best TA and dont get all the settings even if i read on many of them, like the easy clean view of signals
analog onyx
full view for better understanding
the MTF feature is not using any lookahead, as such it is indicating the previous Buy signal on the 4h, a way to put it is that the Strong sell is currently not part of the wekly candle, hence why its not indicated, we can eventually change that in the future.
empty solar
If I recall Optibot is more accurate than auto-pilot? Its just a question if you...
It's not too much of a question of accuracy; the 2 methods aren't compared against each other ever so there's no real statistics on that. We just normally recommend AP as it's easier for users and proves effective quite frequently
they are all 3 exclusive methods of optimisation with different perks and drawbacks for users 🙂
vale dragon
Here's where I read it
maiden marsh
the MTF feature is not using any lookahead, as such it is indicating the previou...
thanks, it makes sense, so i need to be on the right timeframe for it to be usable so to say i guess
empty solar
Here's where I read it
Yes in terms of all the permutations of sensitivity and agility being set at fixed values this will be the case over 2000 bars
However AP will not used fixed values in its signal settings
So that's where the difference lies really
Over 2000 bars; optibot will perform better than the dashboard's recommendations
maiden marsh
thank you
vale dragon
Thats like 1,000 hours on 30 min
empty solar
Thats like 1,000 hours on 30 min
yep it tests quiet a large amount of data 🙂
vale dragon
or 41.6 days
vale dragon
333.33 days-ish
wide panther
hey everyone , is it possible to save the setting for lux algo oneach pair in trading view? i tried saving as template but the settings dont switch. or do you have to change the settings everytime your on a different pair manually?
never mind got it
analog onyx
Where it says "Current Signal" does that mean it is a possible sell?
it means that the current signal (the labels displayed in the oscillator) given by the oscillator is a sell signal
vale dragon
Too bad we couldn't trigger just that in alerts
rain loom
Thank you
vale dragon
👍
rain loom
Whats the best sensitivity and agility for short term
Been doing my own just curios of what yours is
vale dragon
I'm on auto
rain loom
Ye, I was gonna do that
novel tulip
What just happened guys?
rain loom
?
vale dragon
What's a good TSL for BTC? Using 2% /2%
warped nova
@vale dragonOptibot is more accurate
vale dragon
I thought so.
I am going to enter a TSL in my trading bot for Bybit, probably 2%/3%
And it just hit me-I wonder if this can be used for futures on Binance/Kucoin? Maybe.
Seems alts may have more movement than the bigger cap ones
analog onyx
What's a good TSL for BTC? Using 2% /2%
depends on what you mean by 2%, if you place your sl such that you only risk 2% of your capital then yes, it is a good choice.
vale dragon
Using these to give me quick prices for TSL. I wish these could be traded via bot, but Alertatron doesn't use funcions/calls that I know of.
vale dragon
depends on what you mean by 2%, if you place your sl such that you only risk 2% ...
2% trigger/3% TSL
or maybe even 1 and 2
Back to Futures (not the movie lol), does anyone know if paper trading futures is possible on Binancne and/or Kucoin?
hidden moss
Yes, you can get a demo account on Binance
It comes with 100K usd (fakes)
Check for test et Binance and open an account there
hidden moss
Back to Futures (not the movie lol), does anyone know if paper trading futures i...
You can see how in YouTube
empty solar
@loud bramble Sorry we limit to once a day but appreciate your success sharing 😊
loud bramble
<@809686050430517248> Sorry we limit to once a day but appreciate your success s...
All good just super happy with this indicators results. Pnl is on 🔥
empty solar
Very glad to hear it 😎🔥🔥🔥
loud bramble
Very glad to hear it 😎🔥🔥🔥
Where can I find an in depth guide on how to read the oscillator properly?
novel basin
Hi , I registered for quarterly plan, I did get access
empty solar
You didn't get access? Did you link your accounts?
If you did try logging out then in of Tradingview and it should work
novel basin
Yes I link my account
I think my account has not been completed
I have written an email with my account number
Please help
Yes I didn't get access
empty solar
Did you log out then in?
remote inlet
Is there anywhere I can see Optimizer settings for AMC stock?
empty solar
Optibot doesn't support AMC currently however you can use the recommended sensitivity on the dashboard or use Autopilot ☺️
empty solar
If possible could you send me a screenshot of your Tradingview profile?
Just so I can verify your username
empty solar
That does appear to have access, and you tried logging out then in?
novel basin
I did log out and log in
empty solar
And when you go to a chart, invite only you see nothing?
fast cradle
Hey guys! anyone care to share a scalp/swing trading strategy that they use with the lux algo?
Just got this today and still testing the water with it hehe
humble sun
https://youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og
This is fantastic.. Thank you for this.
empty solar
Pleasure 😊
bronze narwhal
https://youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og
So jealous (jokingly). Deff wanted this type of material
empty solar
You shouldn't do; alerts occur on candle close 🙂
wet carbon
Can I see your settings boss
empty solar
I don't have any alerts set currently; but you can use the guide to see example setups 🙂
!alerts
hidden moss
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
vale dragon
@empty solar
Just watched your video-very interesting.
So this is what I see now-1 short, 1 long then another short according to what I watched.
I suppose one can trade this when ranging and switch back when trending
I noticed this as well
analog onyx
!chart btcusd BB FisherTransform
hidden moss
@analog onyx Non supported timeframe, supported timeframes include : ['1', '3', '5', '15', '30', '60', '120', '180', '240', 'D', 'W', 'M']
analog onyx
!chart btcusd 15 BB FisherTransform
hidden moss
@analog onyx
LuxBot
vale dragon
@empty solar
I was watching your video on this and your oscillator settings didn't match well (different exchange, for one), so do we just adjust it to fit like this?
empty solar
What do you mean by didn't match well?
vale dragon
The oscillator didn't match what the candle activity was doing at all-almost opposite
empty solar
This screenshot looks very correlated no?
vale dragon
So I adjusted the length
empty solar
oh I see it's adjusted
vale dragon
Screenshot is after I adjusted
empty solar
Sure; feel free to adjust; it's the concept behind the strat that's the takeaway from the vid 🙂
vale dragon
ok-and this keeps me out of those opposing signals as well
(optibot settings too)
There's 2 to ignore
warped nova
Why I went long TSLA this morning at around 9:45ish, used the 15, 5, and 1 minute chart
loud seal
I would love to have my Trading Viewer to look like @hidden moss Chart what are those indicators that are in your last photo.
warped nova
held the long until the 15 minute predictive range. Options went from 10.2 to 15.6
hidden moss
https://youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og
Hey great vid, it works! Do you know where can I learn more about the bottom indicator of the vid?
warped nova
Here on the 5 minute I faded the strong signals. This seems to work well with TSLA but during certain times of the day
line it up with the 1 minute
wind tiger
So I adjusted the length
which length you are using ?
vale dragon
Just adjust yours to fit-I'm on a different exchange, it will be different
analog onyx
I would love to have my Trading Viewer to look like <@456226577798135808> Chart ...
Bollinger Bands, and fisher transform oscillator, both are builtins tradingview indicators.
analog onyx
Hey great vid, it works! Do you know where can I learn more about the bottom ind...
the lux volatility? see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-metrics-premium/lux-volatility
loud seal
Thanks Alex
hollow mist
How do you calibrate the settings on Algo for stoxs or Crypto that's not listed under OptiBot?
analog onyx
How do you calibrate the settings on Algo for stoxs or Crypto that's not listed ...
you can use the recommended sensitivity in the dashboard, or perform manual adjustments, see https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings#manual-adjustments
hollow mist
Thank you
Does the dashboard show confirmations signals agility or just the signals sensitivity?
analog onyx
Does the dashboard show confirmations signals agility or just the signals sensi...
only sensitivity, as such the one recommended depends on the current agility value used.
analog onyx
@fast cradle make sure to include images into #💰share-profits 🙂
fast cradle
oop my bad
i appreciate what gecko does for the community with strategies that he comes up with hehe
analog onyx
i appreciate what gecko does for the community with strategies that he comes up ...
Make sure to leave a comment and a like then 
mighty sinew
Is it possible to have a auto pilot for contranian settings?
analog onyx
Is it possible to have a auto pilot for contranian settings?
Unfortunately not at the moment, but this could eventually be implemented in the future :)
mighty sinew
Suggestion - on the dashboard the recommended sensitivity is turned off once you selected "both" under the signal mode. will be good to still keep the recommendation since we will have to adjust it for the contranian signals
dreamy vigil
What is the best scalping technique and settings?
To catch 1-2% each trade
Still getting used to the settings - what is the optibot all about? and the sensitivity and agility is under which
bitter geyser
hi devs
empty solar
To catch 1-2% each trade
Check out my latest video, may help in #🔊announcements
swift basalt
anyone trading on Kucoin available now?
ripe flame
Hi. How do I "Assign a role" to get get the scanner alerts? Thanks
vale dragon
Well that answered my question on whether or not the price can go deeper into the opposing cloud. 🤓
honest hound
Yoyoyo
empty solar
Welcome 😊
hidden moss
I need help
Why did tsla have it's turnaround and limited movement today?
everything indicated that it was gonna go down hard, then it screwed me out of $125
vale dragon
It's called normal market movement-no one knows
You can have everything you see say one thing and it can turn in a heartbeat
vale dragon
Am I the only one who thinks Optibot could be one of the Transformers? Just sayin'.
hidden moss
😭 ok
honest hound
Anyone got benzinga pro?
warped nova
@hidden moss what made you think TSLA was going to go down hard?
hidden moss
the indicators
hidden moss
@empty solar
LuxBot
empty solar
Cool eh? 🙂
honest hound
I was wondering, whether theres a list of stocks which do the best with LUX or the best for the day sort of things
Like percentile volatility
Cause if not that would be nice
empty solar
Ah not currently; no screeners for that
marsh crystal
Hey does anyone know... is it worth trading in Eth Pairs // on coinbase they have ADA/ETH... is that profitable or should i just stick to ADA/BTC or ADA/USDT?
I am still really not sure if its worth trading in other pairs.. am i losing profit by using it for a base pair?
vale dragon
First institutional activity I've seen all day
that too
Could that at the same time as institutional activity be a sign of a drop shortly?
and MCD crossed down earlier
I went short at 36205
just a hunch
wanton field
Rising wedge on 15min
vale dragon
@empty solar
spam above?
vale dragon
Had to check-you know how it is
analog onyx
@wide panther avoid sending the same message in multiple channel
analog onyx
@wide panther yep, no promotion, even for specific tools.
vale dragon
increasing inst activity
vale dragon
i duuno
vale dragon
wow, big improvement on the new optibot 30 min numbers
queen heron
There is a BOT? need an api link?
wind tiger
really what happen on 30 min optibot ?
wanton field
Dont use optibot as golden values
hidden moss
Anyone else trade US30?
humble sun
what time frames do you guys mostly use to trade?
rare wing
!help
hidden moss
No Category:
backtest Perform a backtest using a user specified symbol/timeframe/strategy.
chart Returns the image of a candlestick chart.
ha Returns the image of a Heikin-Ashi chart.
help Shows this message
news Recent news for a specific keyword
ticker Various metrics for a specific ticker.
Type !help command for more info on a command.
You can also type !help category for more info on a category.
rotund burrow
How to create alerts for Autopilot signals? What to choose?
hidden moss
How to set up your own custom alerts in TradingView: https://docs.luxalgo.com/lux-algo-premium-indicators/setting-up-alerts-on-tradingview
vale dragon
Dont use optibot as golden values
Its working good for me
If I would keep my hands off the mouse and let it work
wet carbon
Why I was looking at the play
How I look at the chart
How I look at support and decide where to put it
Where I wanted to enter
Where I set the target
Why I picked that particular strike
Why I exited most of my position
untold tartan
!backtest btcusd 15 supertrend(4,20)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest xauusd 18 supertrend(4,20)
hidden moss
@untold tartan
LuxBot
quasi oyster
.
hidden moss
!help
No Category:
backtest Perform a backtest using a user specified symbol/timeframe/strategy.
chart Returns the image of a candlestick chart.
ha Returns the image of a Heikin-Ashi chart.
help Shows this message
news Recent news for a specific keyword
ticker Various metrics for a specific ticker.
Type !help command for more info on a command.
You can also type !help category for more info on a category.
🚫 Lagicious, you can't use that.
humble sun
!backtest btcusd 18 supertrend(4,20)
hidden moss
@humble sun
LuxBot
humble sun
!backtest ETHusd 15 supertrend(4,20)
hidden moss
@humble sun
LuxBot
crude pebble
!backtest ETHusdt
hidden moss
@crude pebble Missing timeframe argument. !backtest command should have the form : !backtest symbol timeframe strategy
crude pebble
!backtest ETHusd 30
hidden moss
@crude pebble Missing strategy argument. !backtest command should have the form : !backtest symbol timeframe strategy
humble sun
!backtest ETHusd 15 sar
hidden moss
@humble sun The Rsi(70,30) strategy is not supported, supported strategies includes: ['macross', 'supertrend', 'macd', 'sar', 'rsi', 'stochastic', 'turtle', 'momentum', 'bbands']
crude pebble
!backtest ETHusdt 30 supertrend
hidden moss
@crude pebble
Incorrect Syntax. supertrend should have the following form: supertrend(factor[float],length[integer])
Example: !backtest GOOG 15 supertrend(4,7)
fathom oak
!backtest ethusdt 15 supertrend(4,8)
hidden moss
@fathom oak
LuxBot
meager plume
I am new to Lux algo. I use .10 risk.
If I am winning 9 out of 10 trades using a demo account. Should I go now to live account? By the way, I am using Lux Algo in analyzing those trades.
glacial escarp
Hi there, i'm new to luxalgo. I dont understand clearly what signal does lux because as you can see on the image below it's written "sell" signal, then a "strong" in green (mean buy ?), then another "strong" in red. I'm pretty confused of what is the signal of the indicator.
Does green "strong" mean "strong buy" or only "highly recommanded to sell in this area" ?
and the signal on the oscilator is to "buy" while i have a red strong on the chart
meager plume
red strong means "Strong Sell". While the green strong means "Strong Buy"
empty solar
Hi there, i'm new to luxalgo. I dont understand clearly what signal does lux bec...
As MJ says red is strong and green is strong see here: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signals#type-of-signals
hidden moss
You cant just take trades like that , you need a strategy and let lux algo to do the most part of it . I never enter trades directly after the strong confirmation apears
verbal birch
I am new to Lux algo. I use .10 risk.
If I am winning 9 out of 10 trades using ...
could you help me out with your settings ? I am pretty new here
empty solar
could you help me out with your settings ? I am pretty new here
Welcome 😊
Have you by chance seem any of my videos, it's a good place to start
Some nice ideas for trading here
verbal birch
will have a look at it
untold sinew
!backtest SOFI 15 stochastic(50,20,7)
hidden moss
@untold sinew
LuxBot
honest hound
yoyoyo
wondering about the alerts
Should they look like this if setting them up for any buy or sell signal?
reef jewel
Where do I view the signals sent out?
honest hound
so you have to select any alert funcion call and then select all the buys and sells from the list?
empty solar
Where do I view the signals sent out?
You can opt into scanners here: #🔔scanners-premium
empty solar
so you have to select any alert funcion call and then select all the buys and se...
First you select the conditions in the list
Then you set the alert
honest hound
how do i get to the lux algo indicator settings
empty solar
The Lux Algo settings are where all the good stuff is and it's a vital part so I suggest taking a read of our docs but it's as simple as double clicking a signal
Then it brings up the settings pane
honest hound
Could you share the settings you have with lux algo by any chance?
like a screenshot or something
ive turned on the alert function call conditions but just wondering for the rest of the settings
empty solar
You can see what I use in some of my videos: https://youtube.com/channel/UCDM5XcH0ogAPkNMGE8zK_og
These are nice strategy and setting ideas
vale dragon
The filtering method using normalized with the oscillator with the settings in the video doesn't always work so well. Can't change the settings because trades just before those matched well. Still trying to find a way, maybe MACD above or below but it's not that great either.
empty solar
The method in the video is a super super conservative method with not too many trades so yeah you miss out on some nice ones
vale dragon
Here's with auto-pilot unless we are supposed to ignore that entire downtrend because of the blue candles
Not seeing much help here either.
I measured all the trades from 6/1 to now. One thing that may help is shorts only under 200 sma/longs only above although there are some nice ones that start and cross over it
I need to go back and measure them that way
I do notice the Lux trend line is below the line so I may able to use that-will have to check the other trades.
That would have worked here as well
should help the odds anyway
vale dragon
Actually after my current trade I'll experiment with TSL using Alertatron. Trigger at 1.5-2% with a .5/.75% SL. Seems safe, should lose very few and only a few trades per day at 1015X would be plenty.
vale dragon
I have a trade going now using TSL.
Alertatron is a little different. If I set, say 500 (for $500) if I read correctly, once it goes in the right direction $500, it triggers and starts following the price. So in theory, the lowest stop loss (assuming price moves the same direction) would be at entry point. From there it keeps following up until it drops $500 from i's highest price. This should be interesting.
as I wrote that, mine triggered
vale dragon
Just spoke with Alertron chat and he sent me the commands for a long and short with a 2% trigger and 0.5% TSL. Above and beyond.
It runs all the TSL and other triggers in their background (you can see the output screen) so nothing is entered in the exchange until the first trigger.
I also sent him a screenshot of Lux and an invite here.
glacial escarp
Hi, got a question : can we know in the institutional activity if they rather short or long ? We have just bar chart but no color to indicates the moove
empty solar
That's sadly not possible to detect but you can imply this using the other indicators 🙂
glacial escarp
well, i see mostly institutionnal activity before a big moove but sometime it is in the trend and sometimes it pre-shots next trend so ... x)
here it preshot a drop
but we are in a buy trend
and here it preshot the pump according to the trend ^^
warped nova
TSLA short this morning. Price hitting 15 min predictive line, 5min trend tracer/catcher still red, 1 min in red reversal zone and r2 predictive line
ripe flame
!backtest zilusd 60 supertrend(21,7)
hidden moss
@ripe flame ERROR: Unsupported symbol argument
ripe flame
!backtest zilusdT 60 supertrend(21,7)
hidden moss
@ripe flame
LuxBot
ripe flame
!backtest ethusd 60 stochastic(50,20,7)
hidden moss
@ripe flame
LuxBot
wind tiger
can we backtest a signal from LUX algo ?
empty solar
can we backtest a signal from LUX algo ?
You cannot I'm afraid for now
empty solar
The blue?
empty solar
You have contrarian signals on the chart
fast ore
is a buy there
empty solar
Contrarian signals go against the trends, ideally I'd suggest sticking with only confirmation signals if you're new
hidden moss
How did everyone do on tsla?
vale dragon
@empty solar
I think I have it fgured out! I need to backtest (manually).
Here's how we can filter out:
Use the Trend Tracker. Like here, whether you enter Short by the Strong signal or the Trend Tracer, where you see the 3 places where the Tracer turns green, the Tracker is still red, so you stay short.
Here it's opposite. You're in a Long, Tracer turns red but Tracker stays green, so you stay long.
Optionally, on the right you could wait until both Tracker and Tracer go red after the Strong Short signal and go Short
The Oscillator doesn't match as well or as quick, so I don't use it for this
another example
empty solar
Absolutely a very nice idea for filtering, love to see these sorts of approaches for trends
vale dragon
and later if its added as an option, it can be automated. It's not 100% but it's better than what I was trying by trading off Tracer colors alone or Tracker alone. A few different ways to enter.
onyx crescent
Absolutely a very nice idea for filtering, love to see these sorts of approaches...
Fair point...this is a good idea when it's trending. Was backtesting couple of symbols, can see false signals. Need to identify when it's ranging/trending
vale dragon
And if this comes up, use the oscillator as 2nd confirmation
wind tiger
<@!456590452703887373>
I think I have it fgured out! I need to backtest (manual...
very interesting filtering
that mean when all trand line passing red + get signal SELL/STRONG
it's opportunity to open a short
vale dragon
in theory
There's no way to have the tracer and tracker cross, otherwise I would try that but look at the colors and the rest before entring or exiting
wind tiger
and can complete with oscilattor
hidden moss
Why i have a feeling that he found a golden idea
full pasture
@vale dragon Trend Tracker means Trend Catcher?
vale dragon
I meant trend tracer-my bad
vale dragon
Why i have a feeling that he found a golden idea
Too soon to know
vale dragon
Never say never
You just said never twice 🤣
I love making that joke
Watching this right now-as soon as they cross and both are green, I'm going long
rich summit
I submitted my username on TradingView
It said it connected
But it says study_not_auth
rich summit
Fixed, thank you!
vale dragon
I think I'll look at something other than btc on Bybit, see if they trade better
hidden moss
decided to fully utilize lux algo
this program is seriously underrated
I just wish we had a lux algo macd/ttm squeeze indicator
safe pine
Has anyone compared using lux algo btc vs eth to see which one profits more?
high valve
Hello, I’m new here. Does anybody use LUX alerts to trade automatically? I’m having trouble coming up with a strategy that triggers consistent results
humble sun
Isn't the Institutional activity the TTM Squeeze?
humble sun
Hello, I’m new here. Does anybody use LUX alerts to trade automatically? I’m hav...
I Use them on a couple of my bots, They are under test right now. I use the Confirmed Buy /Sell Signals to trigger trades on a 15Min Time frame. The only problem is when the trend ends.. It throws up multiple signals and thats where I have been seeing loses. Over all its been ok. I need to find away to disable the bots when the trend starts to change, Any suggestions would be great..
@empty solar any suggestions ?
sand drift
Take profit then
empty solar
I Use them on a couple of my bots, They are under test right now. I use the Conf...
You could maybe use Lux volatility?
Or a little unknown feature; the end of trend in Lux metrics
empty solar
Indeed yes, a very choppy zone
humble sun
Thanks Mate, Good suggestion with the end of trend
vale dragon
<@!456590452703887373> any suggestions ?
Use a TSL?
humble sun
Use a TSL?
TSL is an option.. But the trades are on continuous Modes.. its either Buying or selling.. and in a sideways or a ranging market TSL doesn't help much.. even before it reaches TP another Signal is generated. So there has to be some way to filter these out. But I am really not sure what that could be.
vale dragon
Or a little unknown feature; the end of trend in Lux metrics
Is thete somewhere we can learn how to read and adjust? I'm not sure how to read end of trend.
empty solar
vale dragon
Big change on 30 min Optibot for BTC
From 21/36 to 15/40.
That's perrty 👍
You could just enter/exit off of those.
which reminds me of a question:
If we constantly update with Optibot numbers and the Auto-Pilot is updating, doesn't that mean if I try to measure in the past, it would be inaccurate? Because the settings at the time would have been different than what it shows now.
🤓
vale dragon
https://docs.luxalgo.com/lux-algo-premium-indicators/lux-metrics-premium/end-of-...
Any advice on how to adjust this? It looks interesting
I added a 50% line for quick reference
vale dragon
looks like the 20% line could be used as well for end of a trend
prisma viper
@empty solar Just a question, where can I read how the Lux Oscillator is put together? What I mean in simple words, what does it measure exactly?
humble sun
30 minutes chart does look pretty.. But if you're dealing with one Scrip that's OK.. But when you have lots of scrip's that work on manual sensitivity parameters you have to keep creating new alerts everytime to match the optibots settings on each one of them. 😩
vale dragon
I'm just using the one and redoing alerts only takes a minute.
Accuracy is better and what I prefer, especially if it's automated
vale dragon
Alrighty then
hidden moss
@vale dragon can i dm you?
vale dragon
I don't use DMs unless its an Admin
Besides, I'm still trying to make things consistent so I still don't know what I'm doing yet, just trying different things.
Testing on weekends is pointless.
hidden moss
i just wanna make a suggestion
don’t want to spam here
ill write it up when i get home from work
I’d recommend turning on auto pilot with the following settings
turning on metrics, and leaving it on volatility instead of end of trend
and then also using the oscillator and switching it to legacy mode.
learn how everything works and how it can work together, and then you’ll have a kickass setup
test it on crypto
Lux Algo is an amazing tool. Utilize it to it’s full potential
thin trail
thx for sharing all that @hidden moss 🙌
thin trail
Coming soon for sure!
hidden moss
@swift knot Missing timeframe argument. !backtest command should have the form : !backtest symbol timeframe strategy
swift knot
!backtest btc 1day
hidden moss
@swift knot Missing strategy argument. !backtest command should have the form : !backtest symbol timeframe strategy
swift knot
!backtest btcusdt30
hidden moss
@swift knot Missing timeframe argument. !backtest command should have the form : !backtest symbol timeframe strategy
humble sun
Thanks @hidden moss but when you override the sensitivity settings with auto pilot.. i dont see that making any difference to the other inputs.
hidden moss
i just auto pilot it and leave it alone
the buy/sell signals are just extra confirmation
relying on the signals is setting you up for failure
humble sun
relying on the signals is setting you up for failure
true..
alpine scarab
Hello I just purchased lux algo, cant find ''Invite only script'' optin in tradingview indicator selection. any suggestions?
humble sun
I also noticed that the 5 min time frame gives the best signals if we are using bots.. Rather than higher timeframes like 15 mins and 30. 5 mins gives you Early entries and exits. There are problems when the markets go sideways.. But those losses are overridden when it catches a bigger longer trend.
A couple of my bots are on test on 15 mins and some are on 5. I'll share the results here in a few days.
humble sun
yes
humble sun
But I am trying to figure out How to avoid and disable the bots when its on sideways and ranging.. I am not sure on wht parameters I could disable these?
humble sun
But I guess you win some and loose some Probably will have to live with it
empty solar
Hello I just purchased lux algo, cant find ''Invite only script'' optin in tradi...
Have you connected your accounts?
pale frost
Hey, why do you prefer the auto pilot settings to the optibot settings given? Optibot seems to have been pretty accurate on btc over the last month
hidden moss
Hi All,
newbie here, I wanted to ask people from the UK, for some recommendations on Brokers that are compatible with TV ofcourse. Any recommendations on OandA, TradeStation, Capital.com, gemini, globalPrime and FXCM?
Many Thanks in advance.
alpine scarab
Have you connected your accounts?
Yes It is working 🙂
vale dragon
@empty solar
Asking this again:
which reminds me of a question:
If we constantly update with Optibot numbers and the Auto-Pilot is updating, doesn't that mean if I try to measure itrades n the past, it would be inaccurate? Because the settings at the time would have been different than what it shows now.
🤓
empty solar
Regarding using Optibot settings absolutely correct which is the inherent issue with optimising using backtests. However autopilot won't change past values so what you see is what you get once the bar is closed
You could backtest each Optibot window using the settings given for that period however
swift knot
!backtest ethusd 34 trendtracer
hidden moss
@swift knot The trendtracer strategy is not supported, supported strategies includes: ['macross', 'supertrend', 'macd', 'sar', 'rsi', 'stochastic', 'turtle', 'momentum', 'bbands']
swift knot
!backtest ethusd 60 supertrend
hidden moss
@swift knot
Incorrect Syntax. supertrend should have the following form: supertrend(factor[float],length[integer])
Example: !backtest GOOG 15 supertrend(4,7)
!backtest uniusd 34 supertrend(4,7)
hidden moss
@swift knot ERROR: Unsupported symbol argument
swift knot
!backtest zilusdT 60 supertrend(21,7)
hidden moss
@swift knot
LuxBot
swift knot
!backtest zilusdT 34 supertrend(21,7)
hidden moss
@swift knot
LuxBot
swift knot
how to back test trend catcher? @empty solar
vale dragon
Regarding using Optibot settings absolutely correct which is the inherent issue ...
dude-pain in the assets lol.
So autopilot only adjusts going forward-good to know
current optibot
gaunt sinew
reversal incoming ?
full pasture
Is anything wrong with backtesting scripts that they r gtng removed?
gaunt sinew
!backtest zilusdT 34 supertrend(21,7)
hidden moss
@gaunt sinew
LuxBot
empty solar
Is anything wrong with backtesting scripts that they r gtng removed?
No they are all fine 🙂
full pasture
Then results r not coming here
vale dragon
Optibot
Auto-pilot actually looking better as far as the buy/strong. Trends stay the same
full pasture
@empty solar is backtesting not allowed in fx pairs?
empty solar
Then results r not coming here
They are; you've just been using it with a captial B
It's a lowercase b
vale dragon
How about an alert when the dashboard switches between trending and ranging? Not to trade off of, but for those who don't trade ranging times.
Then later on, can be used as an optional filter in the script
empty solar
We shall look into doing this 🙂 Only issue is it requires a plot
full pasture
!backtest eurusd 15 supertrend (10,3)
hidden moss
@full pasture
Incorrect Syntax. supertrend should have the following form: supertrend(factor[float],length[integer])
Example: !backtest GOOG 15 supertrend(4,7)
!backtest eurusd 15 supertrend (10, 3)
hidden moss
@full pasture
Incorrect Syntax. supertrend should have the following form: supertrend(factor[float],length[integer])
Example: !backtest GOOG 15 supertrend(4,7)
May be time for a separate LuxBot only channel 🤓
gaunt sinew
!backtest eurusd 15 supertrend(10,3)
hidden moss
@gaunt sinew
LuxBot
gaunt sinew
!backtest eurusd 15 supertrend (10, 3)
The space after supertrend
empty solar
well probably just the backtest needs its own channel
because !ha btcusd 15
should be in these
vale dragon
lol
hidden moss
@empty solar
LuxBot
full pasture
!backtest eurusd 15 macross sma(5) sma (22)
hidden moss
@full pasture
Incorrect Syntax. macross should have the following form: macross slowma_type(period[integer]) fastma_type(period[integer])
Example: !backtest GOOG 15 macross SMA(14) SMA(28)
!backtest eurusd 15 macross SMA(5) SMA(22)
hidden moss
@full pasture
LuxBot
full pasture
!backtest eurusd 15 macross EMA(10) EMA(21)
hidden moss
@full pasture
LuxBot
full pasture
!backtest eurusd 15 macross SMA(10) SMA(21)
indigo wedge
!ticker BTCUSDT
hidden moss
@indigo wedge
LuxBot
@indigo wedge ERROR: Make sure the ticker you entered is correct
red sundial
do reversal zones work
prisma viper
do reversal zones work
All depends on the time frames you use, longer it's excellent
red sundial
All depends on the time frames you use, longer it's excellent
what about 5 min char
chart
prisma viper
what about 5 min char
I found that it does work well if combined with the Oscillator, Premium on Autopilot and S/R on. Before entries I check Overbought / Oversold and Divergences on Oscillator, I personally stay out if the Institutional index "ticks" up and it's a Short day, just personal preference, and Signals obviously on. But take into consideration that I'm an established and experienced high leverage scalp trader full-time, but yes the mentioned works for me, I have a 85%+ success ratio, a bit of a dare devil in most people's point of view. You need to have a plan, backtest it thoroughly and "play" with it until your winning ratio is optimal...this on the 5min...oh and I trade Crypto exclusively
hidden moss
@prisma viper may i dm you?
tranquil bobcat
Hello everyone, can someone help me out ? I just bought the indicator but when i go to trading view i get this
empty solar
Did you connect your account? 🙂
tranquil bobcat
Yes i did
empty solar
Log out then in and it'll work 🙂
tranquil bobcat
But maybe its because of my internet that is down rn so am going to wait and then i will refresh
tranquil bobcat
Log out then in and it'll work 🙂
Ok i will also try this
tranquil bobcat
Log out then in and it'll work 🙂
It work , thank you !!
open elbow
Is there anywhere I get more information about the bot's backtest functionalities?
untold tartan
!backtest eurusd 15 macross EMA(25) EMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 supertrend(3,10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross EMA(25) EMA(10) supertrend(10,3)
hidden moss
@untold tartan
Incorrect Syntax. macross should have the following form: macross slowma_type(period[integer]) fastma_type(period[integer])
Example: !backtest GOOG 15 macross SMA(14) SMA(28)
!backtest eurusd 15 SSMA(25) SSMA(10)
hidden moss
@untold tartan The SSMA(25) strategy is not supported, supported strategies includes: ['macross', 'supertrend', 'macd', 'sar', 'rsi', 'stochastic', 'turtle', 'momentum', 'bbands']
untold tartan
!backtest eurusd 15 macross SSMA(25) SSMA(10)
hidden moss
@untold tartan
Incorrect Syntax. macross should have the following form: macross slowma_type(period[integer]) fastma_type(period[integer])
Example: !backtest GOOG 15 macross SMA(14) SMA(28)
!backtest eurusd 15 macross SMA(25) SMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross DEMA(25) DEMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross WMA(25) WMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross TEMA(25) TEMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross TRIMA(25) TRIMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross T3(25) T3(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross KAMA(25) KAMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 5 macross WMA(25) WMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 1 macross WMA(25) WMA(10)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 1 macross WMA(25) WMA(7)
hidden moss
@untold tartan
LuxBot
untold tartan
!backtest eurusd 15 macross WMA(25) WMA(7)
hidden moss
@untold tartan
LuxBot
vale dragon
Bingo
vale dragon
I found that it does work well if combined with the Oscillator, Premium on Autop...
I have a -85% success rate 🤣
more like -850%
prisma viper
<@744499675159330826> may i dm you?
If it's allowed you may
vale ether
lordy i wished i had have started using trend tracer/catcher earlier. remarkable filter
wooden dock
What are your configurations <@!408995933112500227> ?
yes pls can u share with us ? @vale dragon
analog onyx
lordy i wished i had have started using trend tracer/catcher earlier. remarkable...
really glad to hear it
humble bison
Hi im new to Lux, any good strategy to use this service?
humble bison
Thanks bro Gecko
full pasture
!backtest gbpusd 1 macross WMA(25) WMA(10)
hidden moss
@full pasture
LuxBot
full pasture
@empty solar luxbot covers how many days/weeks while sharing backtesting results?
!backtest gbpusd 1 macross WMA(25) WMA(7)
hidden moss
@full pasture
LuxBot
analog onyx
<@456590452703887373> luxbot covers how many days/weeks while sharing backtestin...
The backtest is performed using the most recent 2000 bars atm.
wooden dock
can we backtest sensivity and agility ?
empty solar
can we backtest sensivity and agility ?
Optibot will do this for you ☺️
wooden dock
Optibot will do this for you ☺️
There are 50 pieces of data in the csv file, is the first index the best? or what are the others
empty solar
The best are the ones posted in the server
The CSV is a rankimg from the best to the worst
wooden dock
The best are the ones posted in the server
Thanks 🙂
humble bison
what is optibot?
vale dragon
Holy Dump, Batman!
gaunt sinew
prisma viper
@empty solar Predictive Ranges, does it differ between different time zones or is it fixed?
prisma viper
If the candles are the same it won't matter 🙂
Do you mean Candle Type?
empty solar
Nope, the predictive ranges are fixed 🙂 So it doesn't matter what timezone you're in
prisma viper
👍
cyan shell
Hi guys, just a question, will the directiion of predictive channels tells me if the trend is going up or going down? Thank you
empty solar
They definitely could be used in this way yes 🙂
modest orbit
Hey guys. New to lux algo here. Any tips and tricks to bite that learning curve?
hidden moss
Hey guys. New to lux algo here. Any tips and tricks to bite that learning curv...
In the same boat right now.
cyan shell
They definitely could be used in this way yes 🙂
Thank you. 🙂
hidden moss
how can I post interactive charts?
analog onyx
how can I post interactive charts?
you can't post interactive charts but you can post charts image using the !chart command
!chart eurusd 15
hidden moss
@analog onyx
LuxBot
modest orbit
Thanks!!!! 🙏
elder pivot
Hi @empty solar! Just went over the institutional support video. You mention it uses [Someone]'s hypothesis, but I didn't catch the name. Whose?
vale dragon
Anyone want to make bets on how this one ends?
😁
lunar pagoda
How is the bulls vs bears control percentage calculated?
empty solar
That's not currently disclosed but if people start to find it useful we may turn it into a bigger feature
vale dragon
That's not currently disclosed but if people start to find it useful we may turn...
Is that in the documentation-how to interpret it,
empty solar
Is that in the documentation-how to interpret it,
How to interpret it? Basically it's just a measure of market dominance and who is more active in the market at a given point
lunar pagoda
How to interpret it? Basically it's just a measure of market dominance and who i...
I’m just curious about the accuracy is all
mystic pollen
any one think us30 is still a long sell
lots of indexes and gold went down today but now its just consolidating really, so wondering if anyone thin this will continue.
unique plaza
Anyone want to make bets on how this one ends?
😁
Bollinger width, CCI, and RSI all indicate a bullish divergence. The way the resistance trend looks, I want to say we break 35k by the end of this week. But if there is bad news from China today then maybe not
hidden moss
@wooden dock Missing symbol argument. !backtest command should have the form : !backtest symbol timeframe strategy
No Category:
backtest
chart
depth
ha
help Shows this message
luxbot
news
ticker
Type !help command for more info on a command.
You can also type !help category for more info on a category.
🚫 NIXOOTR, you can't use that.
wooden dock
how can i do a lenght backtest using legacy with lux oscillator ?
empty solar
how can i do a lenght backtest using legacy with lux oscillator ?
You cannot currently I'm afraid
wooden dock
😦
wooden dock
You cannot currently I'm afraid
So, is there a lenght value you recommend for 15 minutes?
empty solar
So, is there a lenght value you recommend for 15 minutes?
That totally depends on how you plan to use it. It's super hard to recommend, it's a bit like asking for the best moving average length, it depends how you want to use it
Personally I like values like 50
Or even 100
Most people would not
wooden dock
That totally depends on how you plan to use it. It's super hard to recommend, it...
👍 thanks
tall arrow
!backtest btcusdt 15 rsi
hidden moss
@tall arrow Missing strategy argument. !backtest command should have the form : !backtest symbol timeframe strategy
copper pulsar
Anyone trading US30 index ?
hardy pecan
ya estamos fuera de horario para el us30
slow root
is there anyway to change trend tracer and trend catcher color?
vale dragon
ugly
thin horizon
I didnt know Kevin (Meet Kevin) used Lux algo lol
Love it
cyan shell
Hi guys, is it correct to conclude that dotted line on institutional profile is a strong support/resistance? Thank you
empty solar
Hi guys, is it correct to conclude that dotted line on institutional profile is ...
That is definitely one way to interpret it yep 😊
hidden moss
Hallo can i ask what are the settings at the 24 live demo ?
empty solar
Those will be defaults
normal gale
I'm not getting my alerts on Strong signals - is it 'Crossing', 'Once per Bar Close' and the following message in the message section: {{plot("Strong Sell")}}? ? Please don't point me to the help page - I've read it back to front but still no alerts...
empty solar
Do you have a screenshot of your settings
empty solar
Yes you've selected it quite wrong here. The condition should be Lux Algo Premium
Then in the next drop down you select strong Sell
Then once per bar close
And it will work 😊
The crossing drop-down is used for if X crosses Y, here we are dealing with labels
slow steeple
change your condition to Lux algo first
empty solar
None of them
normal gale
Ahh nice one
normal gale
change your condition to Lux algo first
Thanks 🙂
Is there anything I need in the message section to help this trigger for US 30?
empty solar
Nothing in particular, you can add anything you like in there 😊
normal gale
Brill thanks everyone. Feel free to delete the chat 😆
empty solar
Hahahah it's all ok 😊😉
onyx cape
Hi guys @hidden moss any suggestions in how to determine what are the coins best to trade or with the best chances of return in futures so you go and trade those in a day with LUX indicator?
I mean, lux indicator can help us in make lots of money by doing great trades.. But how do we know what coin to trade for the maximum return???
For futures crypto..
Thanks @empty solar @hidden moss
empty solar
It's quite a hard thing to forecast
quiet night
Sorry just to check. I just joined this and was wondering what sensitive and agility meant in optibot
empty solar
If we had a method of knowing which coins would pump we'd announce it, you could use institutional activity
empty solar
Sorry just to check. I just joined this and was wondering what sensitive and agi...
Welcome 🙂
See here
warped nova
If you had a method on what coins to pick you wouldn’t share it. You’d be living on a yacht
onyx cape
How would institutional activity help me spotting what coins would pump or dump harder than others?
@empty solar
empty solar
Because it suggests institutions are entering positions
And when institutions enter a market it tends to have an impact
vale dragon
One thing you can always count on, when it does all that sideways crap, you know a big move is coming soon.
Looking back at it, I think I see a way to avoid most of it
gaunt sinew
i got a hard lesson last night that you should stick to the plan no matter what
got my entry after the bearish divergence formed, then shortly after i got scared after thinking i saw a cup and handle
closed almost break even and went long 😛
went straight to where i was aiming shortly after and further lol
jade star
Yep sometimes we need that reminder
scenic knoll
Does someone have a good binary option strategy with lux? I’m now using keltner channel strategy with zig zag. I’m using 1 min chart quotex on 2 min expire time time
manic kettle
hello everyone. I just signed up. I have the indicator in TV and can get to the settings but it's not showing any indicators on the chart and i have a red ! at the end of the indicator
tender relic
!backtest btcusdt 120 supertrend(4,20)
hidden moss
@tender relic
LuxBot
tender relic
!backtest btcusdt 60 macross WMA(25) WMA(10)
hidden moss
@tender relic
LuxBot
hidden moss
I gotta admit
Lux Algo is a stupidly powerful tool
The more I craft my skill, the better I feel
Today's opening made me get into 0 trades
empty solar
Does someone have a good binary option strategy with lux? I’m now using keltner ...
Welcome, have you seen any of my strategy videos?
empty solar
hello everyone. I just signed up. I have the indicator in TV and can get to th...
Try log out then in again 😊
scenic knoll
Welcome, have you seen any of my strategy videos?
No I haven’t
scenic knoll
Thanks gecko
vale dragon
Looks like a long trade coming soon?
The bottom part is a Renko script I'm testing that auto-adjusts ATR, but mainly using it for confirmation.
And no, I won't share it. 🤓 It distracts from Lux and I'm not even sure it's any good-never found a good Renko strat. In theory, it's awesome. In reality, ehhhh
empty solar
Yeah that's the thing with Renko, looks good on paper....
But alas, it's eh in my opinion
vale dragon
Looking good, Mr. Kotter. Those 2 trend lines are agreeing and negotiating lol
I did enter Long on the recent Renko alert, but Renko flips too much I think. I'm doing screen capture to see if it can be used for confirmation, exits or something. If not, no biggie.
I did manual backtesting blindly flipping the Buy/Sell and Strong Buy/Sell from 6/1/21 to now and it still came out ahead.
Another idea I thought of was to exit positions whenever either of those lines change to an opposite color. I need to backtest with that method. You may lose out on some continuing moves, but the losses may be less.
I also noticed that squeeze, so something's getting ready to move. 👍
vale dragon
Looks like it may stall
warped nova
Renko can be hard to trade. I didn't see much benefit in it over traditional candles.
vale dragon
Renko can be hard to trade. I didn't see much benefit in it over traditional can...
That Renko entry played out well this time. I've never used one that auto-adjusted ATR so I'll keep testing it and recording numbers.
If anything give me another confirmation on staying on a trade or trend
onyx escarp
Does anyone have good settings to day trade SPY?
empty solar
Does anyone have good settings to day trade SPY?
Have you tried optibot?
safe pine
Now Im new myself and maybe I am misunderstanding.....isnt the otibot the lux algo or is it something seperate?
onyx escarp
It’s separate. It has its own discord channel with suggested sensitivity and agility settings
vale dragon
Now Im new myself and maybe I am misunderstanding.....isnt the otibot the lux al...
Seperate section that gives suggested settings for different timeframes and many currencies, Forex, etc.... for those who don't use auto
vale dragon
Ahhhhh-HA!
Once an alert is triggered, wait for the price to close below the cloud in a short-similar to Ichimoku-do not trade in the cloud. It doesn't always work when things get weird.
Longs are the opposite. I know exit going back up thru the bottom of the cloud works well, but still trying to figure that out. It won't work as I hoped, so looking for other ways for a good exit.
Other examples
manic kettle
Try log out then in again 😊
Works great thanks. I have to read up on all the indicators associated with it but I like what I’m seeing
autumn ridge
any explanation for lux osc. please?
hidden moss
Lux Algo Full Documentation & educational resources: https://docs.luxalgo.com
autumn ridge
very clear, thank you very much
hidden moss
When the opti bot gets new settings like today means they are better?
empty solar
It means they are fresher and technically yes, the best for the day
full pasture
!backtest EURUSD 1 sar(0.02,0.02)
hidden moss
@full pasture
LuxBot
full pasture
!backtest EURUSD 15 sar(0.02,0.02)
hidden moss
@full pasture
LuxBot
full pasture
!backtest GBPUSD 1 sar(0.02,0.02)
hidden moss
@full pasture
LuxBot
full pasture
!backtest GBPUSD 5 sar(0.02,0.02)
hidden moss
@full pasture
LuxBot
full pasture
!backtest EURUSD 1 sar(0.07,0.07)
hidden moss
@full pasture
LuxBot
full pasture
!backtest GNPUSD 1 sar(0.07,0.07)
hidden moss
@full pasture ERROR: Unsupported symbol argument
full pasture
!backtest GBPUSD 1 sar(0.07,0.07)
hidden moss
@full pasture
LuxBot
full pasture
!backtest GBPUSD 1 sar(0.09,0.09)
hidden moss
@full pasture
LuxBot
full pasture
!backtest GBPUSD 1 sar(0.02,0.09)
hidden moss
@full pasture
LuxBot
full pasture
!backtest EURUSD 1 sar(0.02,0.09)
hidden moss
@full pasture
LuxBot
vale dragon
Man when both cross with the same color, they really move
seconds later
Just had an idea-If I load a 2nd instance of Lux, could I not set Trend Tracer crossing over tracker?
🤓
Dude-just zoomed in an dnoticed the reds never crossed-this was all one long. wow
No luck-it doesn't look like I can cross those 2 even with 2 Lux's loaded
empty solar
You can set an alert for this without 2 instances 😊
vale dragon
the trend tracker and tracer crossing?
It won't work all the time, but nothing does. I'd need to go back and check.
And notice again once price cleared the cloud it started moving more. 👍
fleet glacier
Man when both cross with the same color, they really move
What's indicator is the cloud in the middle?
vale dragon
There isn't one for that. Just the lines on the edges
fleet glacier
I see it now, had to place Tradingview on my good monitor 😆
vale dragon
fresh grove
@empty solar can I get a referral code? a buddy wants to subscribe.....
vale dragon
I manually backtested to June 1st just blindly flipping the green/red/green and it still did well.
vale dragon
You can set an alert for this without 2 instances 😊
How do we do this? Only 1 shows up in the alert dropdown.
empty solar
How do we do this? Only 1 shows up in the alert dropdown.
You're trying to make an alert when the catcher and tracer cross?
vale dragon
You're trying to make an alert when the catcher and tracer cross?
Yeah, I'd like to test it.
Although so far this is working-hasn't closed on TSL yet using 0.75%/0.75%
need it to do several trades before I know
empty solar
You need to select crossing
empty solar
😉😉😉
vale dragon
learn something new all the time
empty solar
Yep lots of fun alerts you can set
vale dragon
Can even have Cloud 1 and 2 cross
empty solar
Exactly
vale dragon
more to test-fun fun fun
empty solar
Crosses of price and reversal zones ect
vale dragon
need to go and bactest that while this trade runs
rich summit
Should the Lux algo be used with extended hours enabled?
empty solar
Should the Lux algo be used with extended hours enabled?
If you trade extended hours that'd make sense yep, else it's not needed
vale dragon
First TSL closed. $200 position at 20x. The highest it reached was $57.00. I entered again with a 0.75%/1.0% TSL to see what happens.
It's still better than negative anything. 👍
manic kettle
quick question about the oscillator. the red bars only seem to be on the top half. does it only indicate when institutions are selling or buying as well?
empty solar
It only shows the opening of positions, not the exact direction
manic kettle
It only shows the opening of positions, not the exact direction
understood. where are you guys getting this data about institutional activity?
empty solar
It's using Schalen's hypothesis 🙂
manic kettle
why are the recommended sensitivities way off of what i'm getting on optibot?
empty solar
Because Optibot tests over more bars and for agility pairings also
manic kettle
so optibot would be the better sensitivity for the day
i've been monitoring the smaller time frames this weekend and it really seemed to work well. but this recent price action this morning seems to not be cooperating with the confirmations. what's the normal timeframes people are trading successfully with this tool?
empty solar
vale dragon
i've been monitoring the smaller time frames this weekend and it really seemed t...
Optibot settings are good for more than 1 day-I've seen them for 5+ days if you look at the post history. It depends on the previous backtests.
@empty solar
Is it 2,000 candles?
manic kettle
Optibot settings are good for more than 1 day-I've seen them for 5+ days if you ...
what timeframes are you trading using Lux
vale dragon
30
manic kettle
I must say the more i deep the more im impressed with this algo
vale dragon
not enough movement between trades on shorter ones for me
The digger you deep? lol....
empty solar
<@!456590452703887373>
Is it 2,000 candles?
Yep it's 2000 bars 🙂 The lower timeframes post daily
Then the 30m, 1h post monday and wednesday
and 4h just monday
manic kettle
good to know. Thanks!
manic kettle
not enough movement between trades on shorter ones for me
do you trade when the Lux Volatility is high?
vale dragon
It's all automated. Higher volatility means bigger moves
it's 93.63% right now during this short
That being said, don't take my word on anything, I'm still searching for consistency, but I'm closer.
Looking at this with the Oscillator crossing down and the cloud is closing up, this looks to be moving further down, correct?
Good thing I work from home-I can test a lot more lol
However, I would wait to enter based on HA
manic kettle
Looking at this with the Oscillator crossing down and the cloud is closing up, t...
What sensitivity is this? I’m trying out the auto feature but still not getting that one indicator
vale dragon
Its in the Optibot section
manic kettle
I’ll try again when I get to my machine I was getting a could buys on the downside too
I’ll screen cap when I get back
hidden moss
Is it better heikinashi for the lux algo or normal candles
vale dragon
normal i think
I use HA for guidance is a trade may continue or reverse
Looks like my analysis earlier was correct-for once. I entered again before this latest drop. 🤓
vale dragon
2nd trade on this dump-$85 total
vale dragon
Closed just in time-HA says it may or may not reverse here
if this candle in HA ends up red, I may enter again. Def if the next 2 go red.
like it just did lol---the Force is With Me
A lot of people trade-off of HA candles alone. There's lots of info about how to read them.
The ones with small bodies with a wick and a tail, one guy called Kaitlin Jenner candles because they don't know which way they want to go. 🤣
So exiting on those is the way to go
gaunt sinew
yea i decided to stick around since the 15m formed a hidden divergence on on that candle
and haven't seen any divergence yet on the 1h
made the mistake last night to not wait for it as well and short too early
vale dragon
if the next has a solid red and a tail with no wick, it's time to go short again-in theory
now that's pretty
you can see what I mean there
vale dragon
Just went short again
gaunt sinew
ohw wow
vale dragon
I closed that one manually, set an exit for when price crosses above the Tracer line instead of TSL. See what happens.
another $48-ish
onyx escarp
Is there a way for optibot to alert you on strong buy/sell of the stocks it scans?
onyx escarp
Yes, but can it alert you when BA gives a strong signal?
Or would I have to set that in TV?
empty solar
You'll need to set this in TV 🙂
onyx escarp
Ok thanks
Fwiw…I find 26 sensitivity to be a good medium for most stocks
Still tinkering but liking the signal results when it’s set on 26 so far
umbral valley
thin trail
!settings
hidden moss
Everything you need to know on optimizing signal settings: https://docs.luxalgo.com/lux-algo-premium-indicators/lux-algo/signal-settings
With color conformation simple, whats a good way to determine if the stock will fall alot even if the candles are green?
tsla did that
Metrics went down, candles were green. It’s just making me scratch my head right now
ripe flame
When using multiple Lux tools (eg Algo Premium, Oscillator, Metrics, RAR, etc) do you typically set the length the same for them all? 😀
gaunt sinew
Metrics went down, candles were green. It’s just making me scratch my head right...
Perhaps you could look for divergences if you're looking for possible reversals ?
as well as the hidden divergence on that low shortly after hinting on a possible trend continuation
hidden moss
is that all auto?
gaunt sinew
the Lux settings i've put them on auto in that screenshots as my optibot settings are set on 30m TF
for BTC
hidden moss
I mainly trade on the 3m and omitted RSI since lux is a powerful took
tool
just need to be proficient at using it
gaunt sinew
I think you could do something similar with the Lux oscillator in regards of divergences, I'm not sure tbh, I just added it for you, but looking at that indicator you might be able to use that also
gaunt sinew
ok, yea the screenshots were set on 3m charts for you as i saw you were using 3m charts
vale dragon
👀
hidden moss
@gaunt sinew may I dm you with questions on the normal oscillator, should you be willing?
granite idol
@empty solar or anyone else. I need help with a great indicator to confirm a signal. I am watching tesla.. its been consolidating.. not sure if i should go Long. What has worked for everyone else as a secondary confirmation to a strong buy signal?
valid spear
Just went short again
hlw bro sorry to distrub u
can u plz tell me what line is this??
gaunt sinew
looks like either 200MA or 200 EMA
gaunt sinew
can u plz tell me what line is this??
200MA
valid spear
oh sure bro? and he add it manually? or any auto from list?
gaunt sinew
yea almost 100% sure
if you look on your screenshot it goes through those candles identical
empty solar
@jade star All good 🙂
vale dragon
200 sma I use for trend reference
It doesn't akways go thru candles. When it hovers around that SMA not a good time to trade imo as it's not made up its mind.
Ok i see what you mean. 3 candles stalled there which makes sense
Many times after its clear which way price is going, you'll get good moves
In theory. 🤓
I hope price drops more
gaunt sinew
aah no i just highlighted that area as a reference point for the guy who asked what indicator it was
valid spear
Many times after its clear which way price is going, you'll get good moves
thnx bro
vale dragon
I'm glad you brought that up.
Right now I'm testing trade entries as price crosses up or down the Trend Tracer. Using a 1%/0.75% TSL.
Looking at this area, that probably would have closed each time before price reached the SMA, both directions. So I may check to see if that could be another entry point.
vale dragon
Good, bad or ugly, I have a Long trade coming it looks like.
first test trying this using Trend Tracer and using TSL
The ema 9 looks interesting and I "may" try to use those crossing if not in a trade. Manually watching those, smaller TSL.
I feel like I should have a lab with Tesla coils sparking and a lab coat lol
Cryptenstein
jade star
@vale dragon I'm currently trying the trend tracer the same as you. So far it seems to work but I'm trying it on forex
warped nova
You just need predictive ranges
Add the reversal zones and you are $$$
Although I do like the trend catcher and tracer
Use it on higher timeframes
vale dragon
Not sure how to use predictive ranges unless it's like support and resistance-looks similar
ok-duh. its in the name
No idea how to set it up, unless you changes the numbers to match
kind of like that
vale dragon
<@408995933112500227> I'm currently trying the trend tracer the same as you. So ...
Seems like its easier to use these on Forex from what I've seen. Maybe BTC is too volatile
I'd switch it a second if it did work better
I see people's results
jade star
Yea sometimes I think btc is too volatile for the signals
split totem
hey quick question guys...new to lux algo....does the auto pilot change sensitivity settings automatically for each time frame!?
vale dragon
yep
hidden moss
My strategy is killing it, little tweak from the YouTube strategy
dull lichen
Hi
cunning sierra
I do not have success with crypto ... the signals are too slow- is there anyone having succes? what is the secret?
🧐
empty solar
I do not have success with crypto ... the signals are too slow- is there anyone ...
Have you seen any of my videos?
Using signals as entires most of the time isn't the best idea
dull lichen
@empty solar
You're saying it's a bad idea to use the singals with crpytos?
I literally just bought this 🥲
wanton field
dont trade altcoins. use only ether with 1-4h timeframes
dull lichen
why not 15 minutes?
empty solar
You're saying it's a bad idea to use the singals with crpytos?
Nope not what I said
dull lichen
@empty solar sorry..
empty solar
Hahaha that's ok, I just meant following them blindly or using them for entries isn't the best approach
If you're looking for good approaches you can find them on my channel
dull lichen
link?
empty solar
dull lichen
tyyy
warped nova
I love you Lux
wait for a bit let it run some through reversal zone then short then buy at predictive range
hollow sequoia
I love you Lux
Which pair/crypto and tf?
warped nova
Still love you Lux
warped nova
let's see if it reverses
hardy knot
@warped nova can you explain the strategy
hidden moss
My strategy is killing it, little tweak from the YouTube strategy
can i see your strategy?
warped nova
it did not reverse which is why it is good to wait for confirmation. Price never closed above or retested the predictive range in the reversal zone
warped nova
this time it worked well, not quite to the predictive range but with other indicators/price action you could tell
hidden moss
Anyone here from uk?
copper pulsar
Are you ready for tomorrow: https://www.tradingview.com/x/G6yfFfB7/
copper pulsar
Anyone here from uk?
I am from London UK and you ?
vernal jolt
Leicester
agile thistle
Still love you Lux
Any video can teach this search it on YouTube
jade star
Are you ready for tomorrow: https://www.tradingview.com/x/G6yfFfB7/
What pair is that
vale dragon
Are you ready for tomorrow: https://www.tradingview.com/x/G6yfFfB7/
It's not Crypto so no lol
vale dragon
it did not reverse which is why it is good to wait for confirmation. Price never...
This is why I can't automate this strat
So I've went away from my 30 min btc and TSL-it just doesn't move enough and TSL kills what I make. And was using Market in/out.
I decided to get complicated now.
4 HR Bybit chart.
Trend Tracer is my trigger for entry for now.
Using Limit Orders for entry and exit (try to save $), 2 TPs, 1.5% and 2.5%
If TP 1 doesn't reach, my Stop Loss triggers a 1% loss.
If TP 1 is reached, entry becomes Stop Loss, 50% of contracts close at 1.5% profit, the other 50% at TP2 (2.5%)
Hopefully, all that will make a difference
In theory, of course. 🤓
But on 4 hour charts, there's the fear1% SL could easily hit, but I have to try
When a trade has already been completed, I may manually re-enter based on the EMA 9 and the oscillator-most are really nice.
In theory.
That looks perrrrrty
I'm ready to use the Dark Side of the Force if needed.
hidden moss
As if I accidentally closed my gold trade (at the top blue arrow) when I was closing some other trades, look at that drop 😢 Managed to do a quick scalp after though
vale dragon
Looking for suggestions:
So I'm trading on 4 HR BTC Bybit chart.
Currently, I'm testing 2 TPs and 1.5% closing 50% of my position and 2.5% closing the rest. My stop loss is 1% if TP 1 isn't reached, then moves to entry price once TP-1 is reached.
Any recommendations on those numbers?
After I see this working, I'll try to edit to where when TP-2 is reached, TP-1 is stop loss, etc....
For those of you who know more about this type of setup on 4 hours
