#Volexlab Aries 3d printer

23 messages · Page 1 of 1 (latest)

simple comet
#

My settings are Extruder:230
Bed: 70
PLA
My issue is I was printing a print and it was working fine til it ran out of filament i've tried unloading filament and it doesn't unload but i can't start any filament because there is no filament being used but the filament is stuck but its not detecting it it is also not unloading

uneven aspen
#

@simple comet you know where its stuck?

simple comet
#

yea

#

its in the tube

simple comet
uneven aspen
#

And where? Hotend middle runout sensor?

simple comet
#

just in the tube

#

and the nozzel

#

i cant send images in here

uneven aspen
#

Now you can

simple comet
#

i cant still

simple comet
uneven aspen
#

Hm weird

simple comet
#

that clearish tube

uneven aspen
#

I mean you should be able to push it through by loading new filament

simple comet
#

so it wont get stuck?

uneven aspen
#

In theory. As long as the hotend is at temp you should be able to force it through yes.

simple comet
#

ty

#

@uneven aspen didnt work at all didnt move

uneven aspen
#

Well thrn you have to remove the tube from the hotend

simple comet
#

its beening pushed out very slowly

uneven aspen
#

Well i did not say it was quick 😄 i guess what happend was that it it got stuck in the unheated /less heated part of the hotend. Called a coldend clog. They can take a while to heatup the cold end enough so it can be pushed out again.