plain solstice
Been having hold in my prints and decided to run a benchy. I’m thinking this may be due to retraction settings 🤔 idk tbh would love some input.
I run a FL SUN SR
(And the bottom of my benchy seems to indicate that I need to move the z index up a tad)
heres a peek at my cura settings :)
jade jungle
Settings look good
Did you calibrate your eSteps?
The printer seems to be under-extruding
Or more probably bad cooling to the nozzle
Do you have a cooling duct? Here's a photo of mine for referance
gloomy star
Esteps dont really help on the sr 😄 they can be done latest firmware allows that.
@plain solstice do you have the shitty or the good version of the sr? It was sold with 2 different hot ends for some time
Oh and the 6.5mm retraction distance are too much
mental stirrup
Do you have a cooling duct? Here's a photo of mine for referance
That looks headburned lol
mental stirrup
Nice
plain solstice
Do you have a cooling duct? Here's a photo of mine for referance
I just printing this guy out a day or two ago
plain solstice
<@398573760749240320> do you have the shitty or the good version of the sr? It w...
Hmm idk 🤔
plain solstice
Oh and the 6.5mm retraction distance are too much
Ahhh perfect Ty
what is a good retraction Distance 🤔
gloomy star
You have to remove the black silicone so i can see the heatblock
gloomy star
Ahhh perfect Ty
Mine worked with 4 but i had a different nozzle
plain solstice
Aw
gloomy star
Damn i rhought they are sold out by now
The problem is that the nozzle is so far away that you have a significant drop in temperature
Oh and flsun og nozzles are crap
Your options are a) contact flsun and ask them for the fixed hotend b) install a nicklplated copper nozzle from brozzle c) you can try and fit a nut between the heatblock and the nozzle so you get a bigger meltarea...d) if you have a thin wire you can try wraping it around the nozzle to get the heat that way
@plain solstice
Source for that tipps guess who was so stupid and bought a super racer when they came out:D
plain solstice
Your options are a) contact flsun and ask them for the fixed hotend b) install a...
hmm crap... do you know if they sell the fixed hotend seperately
is this it?
gloomy star
Thr upper one.
Or wait aminute
Hmm both are not the best
My suggestion would be a nickl plated nozzle
plain solstice
My suggestion would be a nickl plated nozzle
Can’t I just get the nozzle separately? 🧐
gloomy star
Yes you can ? Where did i say you cant?
gloomy star
The og nozzles from flsun are bad. I tried 5 of them and then said f it and bought a 20 Euro Brozzle and had no issues since then
plain solstice
Yes you can ? Where did i say you cant?
Oh it was just a question
Do you know which one you use now? 🤨
gloomy star
Brozzle nickl coated copper and i twisted some wire around it
Still requires 230 c for fast printing
But it prints
plain solstice
Brozzle nickl coated copper and i twisted some wire around it
Gonna be buying these what do you think?
https://www.amazon.com/gp/product/B0CJLJMXT5/ref=ox_sc_act_title_1?smid=AJUKUXZVPYM6H&psc=1
https://www.amazon.com/gp/product/B08NV8JHNJ/ref=ox_sc_act_title_2?smid=AJUKUXZVPYM6H&psc=1
idk if a new heat block is necessary so...
gloomy star
It wont hurt ^_^
plain solstice
It wont hurt ^_^
awesome thank you man :)
